1 /* Support for MMIO probes.
2 * Benfit many code from kprobes
3 * (C) 2002 Louis Zhuang <louis.zhuang@intel.com>.
4 * 2007 Alexander Eichner
5 * 2008 Pekka Paalanen <pq@iki.fi>
8 #include <linux/list.h>
9 #include <linux/rculist.h>
10 #include <linux/spinlock.h>
11 #include <linux/hash.h>
12 #include <linux/init.h>
13 #include <linux/module.h>
14 #include <linux/kernel.h>
15 #include <linux/uaccess.h>
16 #include <linux/ptrace.h>
17 #include <linux/preempt.h>
18 #include <linux/percpu.h>
19 #include <linux/kdebug.h>
20 #include <linux/mutex.h>
22 #include <asm/cacheflush.h>
23 #include <asm/tlbflush.h>
24 #include <linux/errno.h>
25 #include <asm/debugreg.h>
26 #include <linux/mmiotrace.h>
28 #define KMMIO_PAGE_HASH_BITS 4
29 #define KMMIO_PAGE_TABLE_SIZE (1 << KMMIO_PAGE_HASH_BITS)
31 struct kmmio_fault_page
{
32 struct list_head list
;
33 struct kmmio_fault_page
*release_next
;
34 unsigned long page
; /* location of the fault page */
35 pteval_t old_presence
; /* page presence prior to arming */
39 * Number of times this page has been registered as a part
40 * of a probe. If zero, page is disarmed and this may be freed.
41 * Used only by writers (RCU) and post_kmmio_handler().
42 * Protected by kmmio_lock, when linked into kmmio_page_table.
47 struct kmmio_delayed_release
{
49 struct kmmio_fault_page
*release_list
;
52 struct kmmio_context
{
53 struct kmmio_fault_page
*fpage
;
54 struct kmmio_probe
*probe
;
55 unsigned long saved_flags
;
60 static DEFINE_SPINLOCK(kmmio_lock
);
62 /* Protected by kmmio_lock */
63 unsigned int kmmio_count
;
65 /* Read-protected by RCU, write-protected by kmmio_lock. */
66 static struct list_head kmmio_page_table
[KMMIO_PAGE_TABLE_SIZE
];
67 static LIST_HEAD(kmmio_probes
);
69 static struct list_head
*kmmio_page_list(unsigned long page
)
71 return &kmmio_page_table
[hash_long(page
, KMMIO_PAGE_HASH_BITS
)];
74 /* Accessed per-cpu */
75 static DEFINE_PER_CPU(struct kmmio_context
, kmmio_ctx
);
78 * this is basically a dynamic stabbing problem:
79 * Could use the existing prio tree code or
80 * Possible better implementations:
81 * The Interval Skip List: A Data Structure for Finding All Intervals That
82 * Overlap a Point (might be simple)
83 * Space Efficient Dynamic Stabbing with Fast Queries - Mikkel Thorup
85 /* Get the kmmio at this addr (if any). You must be holding RCU read lock. */
86 static struct kmmio_probe
*get_kmmio_probe(unsigned long addr
)
88 struct kmmio_probe
*p
;
89 list_for_each_entry_rcu(p
, &kmmio_probes
, list
) {
90 if (addr
>= p
->addr
&& addr
< (p
->addr
+ p
->len
))
96 /* You must be holding RCU read lock. */
97 static struct kmmio_fault_page
*get_kmmio_fault_page(unsigned long page
)
99 struct list_head
*head
;
100 struct kmmio_fault_page
*f
;
103 head
= kmmio_page_list(page
);
104 list_for_each_entry_rcu(f
, head
, list
) {
111 static void clear_pmd_presence(pmd_t
*pmd
, bool clear
, pmdval_t
*old
)
113 pmdval_t v
= pmd_val(*pmd
);
115 *old
= v
& _PAGE_PRESENT
;
117 } else /* presume this has been called with clear==true previously */
119 set_pmd(pmd
, __pmd(v
));
122 static void clear_pte_presence(pte_t
*pte
, bool clear
, pteval_t
*old
)
124 pteval_t v
= pte_val(*pte
);
126 *old
= v
& _PAGE_PRESENT
;
128 } else /* presume this has been called with clear==true previously */
130 set_pte_atomic(pte
, __pte(v
));
133 static int clear_page_presence(struct kmmio_fault_page
*f
, bool clear
)
136 pte_t
*pte
= lookup_address(f
->page
, &level
);
139 pr_err("kmmio: no pte for page 0x%08lx\n", f
->page
);
145 clear_pmd_presence((pmd_t
*)pte
, clear
, &f
->old_presence
);
148 clear_pte_presence(pte
, clear
, &f
->old_presence
);
151 pr_err("kmmio: unexpected page level 0x%x.\n", level
);
155 __flush_tlb_one(f
->page
);
160 * Mark the given page as not present. Access to it will trigger a fault.
162 * Struct kmmio_fault_page is protected by RCU and kmmio_lock, but the
163 * protection is ignored here. RCU read lock is assumed held, so the struct
164 * will not disappear unexpectedly. Furthermore, the caller must guarantee,
165 * that double arming the same virtual address (page) cannot occur.
167 * Double disarming on the other hand is allowed, and may occur when a fault
168 * and mmiotrace shutdown happen simultaneously.
170 static int arm_kmmio_fault_page(struct kmmio_fault_page
*f
)
173 WARN_ONCE(f
->armed
, KERN_ERR
"kmmio page already armed.\n");
175 pr_warning("kmmio double-arm: page 0x%08lx, ref %d, old %d\n",
176 f
->page
, f
->count
, !!f
->old_presence
);
178 ret
= clear_page_presence(f
, true);
179 WARN_ONCE(ret
< 0, KERN_ERR
"kmmio arming 0x%08lx failed.\n", f
->page
);
184 /** Restore the given page to saved presence state. */
185 static void disarm_kmmio_fault_page(struct kmmio_fault_page
*f
)
187 int ret
= clear_page_presence(f
, false);
189 KERN_ERR
"kmmio disarming 0x%08lx failed.\n", f
->page
);
194 * This is being called from do_page_fault().
196 * We may be in an interrupt or a critical section. Also prefecthing may
197 * trigger a page fault. We may be in the middle of process switch.
198 * We cannot take any locks, because we could be executing especially
199 * within a kmmio critical section.
201 * Local interrupts are disabled, so preemption cannot happen.
202 * Do not enable interrupts, do not sleep, and watch out for other CPUs.
205 * Interrupts are disabled on entry as trap3 is an interrupt gate
206 * and they remain disabled thorough out this function.
208 int kmmio_handler(struct pt_regs
*regs
, unsigned long addr
)
210 struct kmmio_context
*ctx
;
211 struct kmmio_fault_page
*faultpage
;
212 int ret
= 0; /* default to fault not handled */
215 * Preemption is now disabled to prevent process switch during
216 * single stepping. We can only handle one active kmmio trace
217 * per cpu, so ensure that we finish it before something else
218 * gets to run. We also hold the RCU read lock over single
219 * stepping to avoid looking up the probe and kmmio_fault_page
225 faultpage
= get_kmmio_fault_page(addr
);
228 * Either this page fault is not caused by kmmio, or
229 * another CPU just pulled the kmmio probe from under
230 * our feet. The latter case should not be possible.
235 ctx
= &get_cpu_var(kmmio_ctx
);
237 if (addr
== ctx
->addr
) {
239 * A second fault on the same page means some other
240 * condition needs handling by do_page_fault(), the
241 * page really not being present is the most common.
243 pr_debug("kmmio: secondary hit for 0x%08lx CPU %d.\n",
244 addr
, smp_processor_id());
246 if (!faultpage
->old_presence
)
247 pr_info("kmmio: unexpected secondary hit for "
248 "address 0x%08lx on CPU %d.\n", addr
,
252 * Prevent overwriting already in-flight context.
253 * This should not happen, let's hope disarming at
254 * least prevents a panic.
256 pr_emerg("kmmio: recursive probe hit on CPU %d, "
257 "for address 0x%08lx. Ignoring.\n",
258 smp_processor_id(), addr
);
259 pr_emerg("kmmio: previous hit was at 0x%08lx.\n",
261 disarm_kmmio_fault_page(faultpage
);
267 ctx
->fpage
= faultpage
;
268 ctx
->probe
= get_kmmio_probe(addr
);
269 ctx
->saved_flags
= (regs
->flags
& (X86_EFLAGS_TF
| X86_EFLAGS_IF
));
272 if (ctx
->probe
&& ctx
->probe
->pre_handler
)
273 ctx
->probe
->pre_handler(ctx
->probe
, regs
, addr
);
276 * Enable single-stepping and disable interrupts for the faulting
277 * context. Local interrupts must not get enabled during stepping.
279 regs
->flags
|= X86_EFLAGS_TF
;
280 regs
->flags
&= ~X86_EFLAGS_IF
;
282 /* Now we set present bit in PTE and single step. */
283 disarm_kmmio_fault_page(ctx
->fpage
);
286 * If another cpu accesses the same page while we are stepping,
287 * the access will not be caught. It will simply succeed and the
288 * only downside is we lose the event. If this becomes a problem,
289 * the user should drop to single cpu before tracing.
292 put_cpu_var(kmmio_ctx
);
293 return 1; /* fault handled */
296 put_cpu_var(kmmio_ctx
);
299 preempt_enable_no_resched();
304 * Interrupts are disabled on entry as trap1 is an interrupt gate
305 * and they remain disabled thorough out this function.
306 * This must always get called as the pair to kmmio_handler().
308 static int post_kmmio_handler(unsigned long condition
, struct pt_regs
*regs
)
311 struct kmmio_context
*ctx
= &get_cpu_var(kmmio_ctx
);
315 * debug traps without an active context are due to either
316 * something external causing them (f.e. using a debugger while
317 * mmio tracing enabled), or erroneous behaviour
319 pr_warning("kmmio: unexpected debug trap on CPU %d.\n",
324 if (ctx
->probe
&& ctx
->probe
->post_handler
)
325 ctx
->probe
->post_handler(ctx
->probe
, condition
, regs
);
327 /* Prevent racing against release_kmmio_fault_page(). */
328 spin_lock(&kmmio_lock
);
329 if (ctx
->fpage
->count
)
330 arm_kmmio_fault_page(ctx
->fpage
);
331 spin_unlock(&kmmio_lock
);
333 regs
->flags
&= ~X86_EFLAGS_TF
;
334 regs
->flags
|= ctx
->saved_flags
;
336 /* These were acquired in kmmio_handler(). */
340 preempt_enable_no_resched();
343 * if somebody else is singlestepping across a probe point, flags
344 * will have TF set, in which case, continue the remaining processing
345 * of do_debug, as if this is not a probe hit.
347 if (!(regs
->flags
& X86_EFLAGS_TF
))
350 put_cpu_var(kmmio_ctx
);
354 /* You must be holding kmmio_lock. */
355 static int add_kmmio_fault_page(unsigned long page
)
357 struct kmmio_fault_page
*f
;
360 f
= get_kmmio_fault_page(page
);
363 arm_kmmio_fault_page(f
);
368 f
= kzalloc(sizeof(*f
), GFP_ATOMIC
);
375 if (arm_kmmio_fault_page(f
)) {
380 list_add_rcu(&f
->list
, kmmio_page_list(f
->page
));
385 /* You must be holding kmmio_lock. */
386 static void release_kmmio_fault_page(unsigned long page
,
387 struct kmmio_fault_page
**release_list
)
389 struct kmmio_fault_page
*f
;
392 f
= get_kmmio_fault_page(page
);
397 BUG_ON(f
->count
< 0);
399 disarm_kmmio_fault_page(f
);
400 f
->release_next
= *release_list
;
406 * With page-unaligned ioremaps, one or two armed pages may contain
407 * addresses from outside the intended mapping. Events for these addresses
408 * are currently silently dropped. The events may result only from programming
409 * mistakes by accessing addresses before the beginning or past the end of a
412 int register_kmmio_probe(struct kmmio_probe
*p
)
416 unsigned long size
= 0;
417 const unsigned long size_lim
= p
->len
+ (p
->addr
& ~PAGE_MASK
);
419 spin_lock_irqsave(&kmmio_lock
, flags
);
420 if (get_kmmio_probe(p
->addr
)) {
425 list_add_rcu(&p
->list
, &kmmio_probes
);
426 while (size
< size_lim
) {
427 if (add_kmmio_fault_page(p
->addr
+ size
))
428 pr_err("kmmio: Unable to set page fault.\n");
432 spin_unlock_irqrestore(&kmmio_lock
, flags
);
434 * XXX: What should I do here?
435 * Here was a call to global_flush_tlb(), but it does not exist
436 * anymore. It seems it's not needed after all.
440 EXPORT_SYMBOL(register_kmmio_probe
);
442 static void rcu_free_kmmio_fault_pages(struct rcu_head
*head
)
444 struct kmmio_delayed_release
*dr
= container_of(
446 struct kmmio_delayed_release
,
448 struct kmmio_fault_page
*f
= dr
->release_list
;
450 struct kmmio_fault_page
*next
= f
->release_next
;
458 static void remove_kmmio_fault_pages(struct rcu_head
*head
)
460 struct kmmio_delayed_release
*dr
=
461 container_of(head
, struct kmmio_delayed_release
, rcu
);
462 struct kmmio_fault_page
*f
= dr
->release_list
;
463 struct kmmio_fault_page
**prevp
= &dr
->release_list
;
466 spin_lock_irqsave(&kmmio_lock
, flags
);
469 list_del_rcu(&f
->list
);
470 prevp
= &f
->release_next
;
472 *prevp
= f
->release_next
;
476 spin_unlock_irqrestore(&kmmio_lock
, flags
);
478 /* This is the real RCU destroy call. */
479 call_rcu(&dr
->rcu
, rcu_free_kmmio_fault_pages
);
483 * Remove a kmmio probe. You have to synchronize_rcu() before you can be
484 * sure that the callbacks will not be called anymore. Only after that
485 * you may actually release your struct kmmio_probe.
487 * Unregistering a kmmio fault page has three steps:
488 * 1. release_kmmio_fault_page()
489 * Disarm the page, wait a grace period to let all faults finish.
490 * 2. remove_kmmio_fault_pages()
491 * Remove the pages from kmmio_page_table.
492 * 3. rcu_free_kmmio_fault_pages()
493 * Actally free the kmmio_fault_page structs as with RCU.
495 void unregister_kmmio_probe(struct kmmio_probe
*p
)
498 unsigned long size
= 0;
499 const unsigned long size_lim
= p
->len
+ (p
->addr
& ~PAGE_MASK
);
500 struct kmmio_fault_page
*release_list
= NULL
;
501 struct kmmio_delayed_release
*drelease
;
503 spin_lock_irqsave(&kmmio_lock
, flags
);
504 while (size
< size_lim
) {
505 release_kmmio_fault_page(p
->addr
+ size
, &release_list
);
508 list_del_rcu(&p
->list
);
510 spin_unlock_irqrestore(&kmmio_lock
, flags
);
512 drelease
= kmalloc(sizeof(*drelease
), GFP_ATOMIC
);
514 pr_crit("kmmio: leaking kmmio_fault_page objects.\n");
517 drelease
->release_list
= release_list
;
520 * This is not really RCU here. We have just disarmed a set of
521 * pages so that they cannot trigger page faults anymore. However,
522 * we cannot remove the pages from kmmio_page_table,
523 * because a probe hit might be in flight on another CPU. The
524 * pages are collected into a list, and they will be removed from
525 * kmmio_page_table when it is certain that no probe hit related to
526 * these pages can be in flight. RCU grace period sounds like a
529 * If we removed the pages too early, kmmio page fault handler might
530 * not find the respective kmmio_fault_page and determine it's not
531 * a kmmio fault, when it actually is. This would lead to madness.
533 call_rcu(&drelease
->rcu
, remove_kmmio_fault_pages
);
535 EXPORT_SYMBOL(unregister_kmmio_probe
);
538 kmmio_die_notifier(struct notifier_block
*nb
, unsigned long val
, void *args
)
540 struct die_args
*arg
= args
;
542 if (val
== DIE_DEBUG
&& (arg
->err
& DR_STEP
))
543 if (post_kmmio_handler(arg
->err
, arg
->regs
) == 1)
549 static struct notifier_block nb_die
= {
550 .notifier_call
= kmmio_die_notifier
557 for (i
= 0; i
< KMMIO_PAGE_TABLE_SIZE
; i
++)
558 INIT_LIST_HEAD(&kmmio_page_table
[i
]);
560 return register_die_notifier(&nb_die
);
563 void kmmio_cleanup(void)
567 unregister_die_notifier(&nb_die
);
568 for (i
= 0; i
< KMMIO_PAGE_TABLE_SIZE
; i
++) {
569 WARN_ONCE(!list_empty(&kmmio_page_table
[i
]),
570 KERN_ERR
"kmmio_page_table not empty at cleanup, any further tracing will leak memory.\n");