2 * linux/drivers/message/fusion/mptsas.h
3 * High performance SCSI + LAN / Fibre Channel device drivers.
4 * For use with PCI chip/adapter(s):
5 * LSIFC9xx/LSI409xx Fibre Channel
6 * running LSI MPT (Message Passing Technology) firmware.
8 * Copyright (c) 1999-2008 LSI Corporation
9 * (mailto:DL-MPTFusionLinux@lsi.com)
12 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
14 This program is free software; you can redistribute it and/or modify
15 it under the terms of the GNU General Public License as published by
16 the Free Software Foundation; version 2 of the License.
18 This program is distributed in the hope that it will be useful,
19 but WITHOUT ANY WARRANTY; without even the implied warranty of
20 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
21 GNU General Public License for more details.
24 THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR
25 CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT
26 LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT,
27 MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is
28 solely responsible for determining the appropriateness of using and
29 distributing the Program and assumes all risks associated with its
30 exercise of rights under this Agreement, including but not limited to
31 the risks and costs of program errors, damage to or loss of data,
32 programs or equipment, and unavailability or interruption of operations.
34 DISCLAIMER OF LIABILITY
35 NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY
36 DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
37 DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND
38 ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
39 TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
40 USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED
41 HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES
43 You should have received a copy of the GNU General Public License
44 along with this program; if not, write to the Free Software
45 Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
48 #ifndef MPTSAS_H_INCLUDED
49 #define MPTSAS_H_INCLUDED
50 /*{-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
52 struct mptsas_target_reset_event
{
53 struct list_head list
;
54 EVENT_DATA_SAS_DEVICE_STATUS_CHANGE sas_event_data
;
55 u8 target_reset_issued
;
58 enum mptsas_hotplug_action
{
63 MPTSAS_ADD_INACTIVE_VOLUME
,
67 struct mptsas_hotplug_event
{
68 struct work_struct work
;
70 enum mptsas_hotplug_action event_type
;
78 u8 phys_disk_num_valid
; /* hrc (hidden raid component) */
79 u8 phys_disk_num
; /* hrc - unique index*/
80 u8 hidden_raid_component
; /* hrc - don't expose*/
83 struct mptsas_discovery_event
{
84 struct work_struct work
;
89 * SAS topology structures
91 * The MPT Fusion firmware interface spreads information about the
92 * SAS topology over many manufacture pages, thus we need some data
93 * structure to collect it and process it for the SAS transport class.
96 struct mptsas_devinfo
{
97 u16 handle
; /* unique id to address this device */
98 u16 handle_parent
; /* unique id to address parent device */
99 u16 handle_enclosure
; /* enclosure identifier of the enclosure */
100 u16 slot
; /* physical slot in enclosure */
101 u8 phy_id
; /* phy number of parent device */
102 u8 port_id
; /* sas physical port this device
104 u8 id
; /* logical target id of this device */
105 u32 phys_disk_num
; /* phys disk id, for csmi-ioctls */
106 u8 channel
; /* logical bus number of this device */
107 u64 sas_address
; /* WWN of this device,
108 SATA is assigned by HBA,expander */
109 u32 device_info
; /* bitfield detailed info about this device */
113 * Specific details on ports, wide/narrow
115 struct mptsas_portinfo_details
{
116 u16 num_phys
; /* number of phys belong to this port */
117 u64 phy_bitmask
; /* TODO, extend support for 255 phys */
118 struct sas_rphy
*rphy
; /* transport layer rphy object */
119 struct sas_port
*port
; /* transport layer port object */
120 struct scsi_target
*starget
;
121 struct mptsas_portinfo
*port_info
;
124 struct mptsas_phyinfo
{
125 u16 handle
; /* unique id to address this */
126 u8 phy_id
; /* phy index */
127 u8 port_id
; /* firmware port identifier */
128 u8 negotiated_link_rate
; /* nego'd link rate for this phy */
129 u8 hw_link_rate
; /* hardware max/min phys link rate */
130 u8 programmed_link_rate
; /* programmed max/min phy link rate */
131 u8 sas_port_add_phy
; /* flag to request sas_port_add_phy*/
132 struct mptsas_devinfo identify
; /* point to phy device info */
133 struct mptsas_devinfo attached
; /* point to attached device info */
134 struct sas_phy
*phy
; /* transport layer phy object */
135 struct mptsas_portinfo
*portinfo
;
136 struct mptsas_portinfo_details
* port_details
;
139 struct mptsas_portinfo
{
140 struct list_head list
;
141 u16 num_phys
; /* number of phys */
142 struct mptsas_phyinfo
*phy_info
;
145 struct mptsas_enclosure
{
146 u64 enclosure_logical_id
; /* The WWN for the enclosure */
147 u16 enclosure_handle
; /* unique id to address this */
148 u16 flags
; /* details enclosure management */
149 u16 num_slot
; /* num slots */
150 u16 start_slot
; /* first slot */
151 u8 start_id
; /* starting logical target id */
152 u8 start_channel
; /* starting logical channel id */
153 u8 sep_id
; /* SEP device logical target id */
154 u8 sep_channel
; /* SEP channel logical channel id */
157 /*}-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/