ACPI: make acpi_pci_bind() static
[linux-2.6/linux-acpi-2.6.git] / drivers / mtd / nand / pxa3xx_nand.c
blob30a8ce6d3e69bcdc1f0429daafacd06115baf06e
1 /*
2 * drivers/mtd/nand/pxa3xx_nand.c
4 * Copyright © 2005 Intel Corporation
5 * Copyright © 2006 Marvell International Ltd.
7 * This program is free software; you can redistribute it and/or modify
8 * it under the terms of the GNU General Public License version 2 as
9 * published by the Free Software Foundation.
12 #include <linux/module.h>
13 #include <linux/interrupt.h>
14 #include <linux/platform_device.h>
15 #include <linux/dma-mapping.h>
16 #include <linux/delay.h>
17 #include <linux/clk.h>
18 #include <linux/mtd/mtd.h>
19 #include <linux/mtd/nand.h>
20 #include <linux/mtd/partitions.h>
21 #include <linux/io.h>
22 #include <linux/irq.h>
24 #include <mach/dma.h>
25 #include <mach/pxa3xx_nand.h>
27 #define CHIP_DELAY_TIMEOUT (2 * HZ/10)
29 /* registers and bit definitions */
30 #define NDCR (0x00) /* Control register */
31 #define NDTR0CS0 (0x04) /* Timing Parameter 0 for CS0 */
32 #define NDTR1CS0 (0x0C) /* Timing Parameter 1 for CS0 */
33 #define NDSR (0x14) /* Status Register */
34 #define NDPCR (0x18) /* Page Count Register */
35 #define NDBDR0 (0x1C) /* Bad Block Register 0 */
36 #define NDBDR1 (0x20) /* Bad Block Register 1 */
37 #define NDDB (0x40) /* Data Buffer */
38 #define NDCB0 (0x48) /* Command Buffer0 */
39 #define NDCB1 (0x4C) /* Command Buffer1 */
40 #define NDCB2 (0x50) /* Command Buffer2 */
42 #define NDCR_SPARE_EN (0x1 << 31)
43 #define NDCR_ECC_EN (0x1 << 30)
44 #define NDCR_DMA_EN (0x1 << 29)
45 #define NDCR_ND_RUN (0x1 << 28)
46 #define NDCR_DWIDTH_C (0x1 << 27)
47 #define NDCR_DWIDTH_M (0x1 << 26)
48 #define NDCR_PAGE_SZ (0x1 << 24)
49 #define NDCR_NCSX (0x1 << 23)
50 #define NDCR_ND_MODE (0x3 << 21)
51 #define NDCR_NAND_MODE (0x0)
52 #define NDCR_CLR_PG_CNT (0x1 << 20)
53 #define NDCR_CLR_ECC (0x1 << 19)
54 #define NDCR_RD_ID_CNT_MASK (0x7 << 16)
55 #define NDCR_RD_ID_CNT(x) (((x) << 16) & NDCR_RD_ID_CNT_MASK)
57 #define NDCR_RA_START (0x1 << 15)
58 #define NDCR_PG_PER_BLK (0x1 << 14)
59 #define NDCR_ND_ARB_EN (0x1 << 12)
61 #define NDSR_MASK (0xfff)
62 #define NDSR_RDY (0x1 << 11)
63 #define NDSR_CS0_PAGED (0x1 << 10)
64 #define NDSR_CS1_PAGED (0x1 << 9)
65 #define NDSR_CS0_CMDD (0x1 << 8)
66 #define NDSR_CS1_CMDD (0x1 << 7)
67 #define NDSR_CS0_BBD (0x1 << 6)
68 #define NDSR_CS1_BBD (0x1 << 5)
69 #define NDSR_DBERR (0x1 << 4)
70 #define NDSR_SBERR (0x1 << 3)
71 #define NDSR_WRDREQ (0x1 << 2)
72 #define NDSR_RDDREQ (0x1 << 1)
73 #define NDSR_WRCMDREQ (0x1)
75 #define NDCB0_AUTO_RS (0x1 << 25)
76 #define NDCB0_CSEL (0x1 << 24)
77 #define NDCB0_CMD_TYPE_MASK (0x7 << 21)
78 #define NDCB0_CMD_TYPE(x) (((x) << 21) & NDCB0_CMD_TYPE_MASK)
79 #define NDCB0_NC (0x1 << 20)
80 #define NDCB0_DBC (0x1 << 19)
81 #define NDCB0_ADDR_CYC_MASK (0x7 << 16)
82 #define NDCB0_ADDR_CYC(x) (((x) << 16) & NDCB0_ADDR_CYC_MASK)
83 #define NDCB0_CMD2_MASK (0xff << 8)
84 #define NDCB0_CMD1_MASK (0xff)
85 #define NDCB0_ADDR_CYC_SHIFT (16)
87 /* dma-able I/O address for the NAND data and commands */
88 #define NDCB0_DMA_ADDR (0x43100048)
89 #define NDDB_DMA_ADDR (0x43100040)
91 /* macros for registers read/write */
92 #define nand_writel(info, off, val) \
93 __raw_writel((val), (info)->mmio_base + (off))
95 #define nand_readl(info, off) \
96 __raw_readl((info)->mmio_base + (off))
98 /* error code and state */
99 enum {
100 ERR_NONE = 0,
101 ERR_DMABUSERR = -1,
102 ERR_SENDCMD = -2,
103 ERR_DBERR = -3,
104 ERR_BBERR = -4,
107 enum {
108 STATE_READY = 0,
109 STATE_CMD_HANDLE,
110 STATE_DMA_READING,
111 STATE_DMA_WRITING,
112 STATE_DMA_DONE,
113 STATE_PIO_READING,
114 STATE_PIO_WRITING,
117 struct pxa3xx_nand_info {
118 struct nand_chip nand_chip;
120 struct platform_device *pdev;
121 const struct pxa3xx_nand_flash *flash_info;
123 struct clk *clk;
124 void __iomem *mmio_base;
126 unsigned int buf_start;
127 unsigned int buf_count;
129 /* DMA information */
130 int drcmr_dat;
131 int drcmr_cmd;
133 unsigned char *data_buff;
134 dma_addr_t data_buff_phys;
135 size_t data_buff_size;
136 int data_dma_ch;
137 struct pxa_dma_desc *data_desc;
138 dma_addr_t data_desc_addr;
140 uint32_t reg_ndcr;
142 /* saved column/page_addr during CMD_SEQIN */
143 int seqin_column;
144 int seqin_page_addr;
146 /* relate to the command */
147 unsigned int state;
149 int use_ecc; /* use HW ECC ? */
150 int use_dma; /* use DMA ? */
152 size_t data_size; /* data size in FIFO */
153 int retcode;
154 struct completion cmd_complete;
156 /* generated NDCBx register values */
157 uint32_t ndcb0;
158 uint32_t ndcb1;
159 uint32_t ndcb2;
161 /* calculated from pxa3xx_nand_flash data */
162 size_t oob_size;
163 size_t read_id_bytes;
165 unsigned int col_addr_cycles;
166 unsigned int row_addr_cycles;
169 static int use_dma = 1;
170 module_param(use_dma, bool, 0444);
171 MODULE_PARM_DESC(use_dma, "enable DMA for data transfering to/from NAND HW");
174 * Default NAND flash controller configuration setup by the
175 * bootloader. This configuration is used only when pdata->keep_config is set
177 static struct pxa3xx_nand_timing default_timing;
178 static struct pxa3xx_nand_flash default_flash;
180 static struct pxa3xx_nand_cmdset smallpage_cmdset = {
181 .read1 = 0x0000,
182 .read2 = 0x0050,
183 .program = 0x1080,
184 .read_status = 0x0070,
185 .read_id = 0x0090,
186 .erase = 0xD060,
187 .reset = 0x00FF,
188 .lock = 0x002A,
189 .unlock = 0x2423,
190 .lock_status = 0x007A,
193 static struct pxa3xx_nand_cmdset largepage_cmdset = {
194 .read1 = 0x3000,
195 .read2 = 0x0050,
196 .program = 0x1080,
197 .read_status = 0x0070,
198 .read_id = 0x0090,
199 .erase = 0xD060,
200 .reset = 0x00FF,
201 .lock = 0x002A,
202 .unlock = 0x2423,
203 .lock_status = 0x007A,
206 #ifdef CONFIG_MTD_NAND_PXA3xx_BUILTIN
207 static struct pxa3xx_nand_timing samsung512MbX16_timing = {
208 .tCH = 10,
209 .tCS = 0,
210 .tWH = 20,
211 .tWP = 40,
212 .tRH = 30,
213 .tRP = 40,
214 .tR = 11123,
215 .tWHR = 110,
216 .tAR = 10,
219 static struct pxa3xx_nand_flash samsung512MbX16 = {
220 .timing = &samsung512MbX16_timing,
221 .cmdset = &smallpage_cmdset,
222 .page_per_block = 32,
223 .page_size = 512,
224 .flash_width = 16,
225 .dfc_width = 16,
226 .num_blocks = 4096,
227 .chip_id = 0x46ec,
230 static struct pxa3xx_nand_timing micron_timing = {
231 .tCH = 10,
232 .tCS = 25,
233 .tWH = 15,
234 .tWP = 25,
235 .tRH = 15,
236 .tRP = 25,
237 .tR = 25000,
238 .tWHR = 60,
239 .tAR = 10,
242 static struct pxa3xx_nand_flash micron1GbX8 = {
243 .timing = &micron_timing,
244 .cmdset = &largepage_cmdset,
245 .page_per_block = 64,
246 .page_size = 2048,
247 .flash_width = 8,
248 .dfc_width = 8,
249 .num_blocks = 1024,
250 .chip_id = 0xa12c,
253 static struct pxa3xx_nand_flash micron1GbX16 = {
254 .timing = &micron_timing,
255 .cmdset = &largepage_cmdset,
256 .page_per_block = 64,
257 .page_size = 2048,
258 .flash_width = 16,
259 .dfc_width = 16,
260 .num_blocks = 1024,
261 .chip_id = 0xb12c,
264 static struct pxa3xx_nand_timing stm2GbX16_timing = {
265 .tCH = 10,
266 .tCS = 35,
267 .tWH = 15,
268 .tWP = 25,
269 .tRH = 15,
270 .tRP = 25,
271 .tR = 25000,
272 .tWHR = 60,
273 .tAR = 10,
276 static struct pxa3xx_nand_flash stm2GbX16 = {
277 .timing = &stm2GbX16_timing,
278 .cmdset = &largepage_cmdset,
279 .page_per_block = 64,
280 .page_size = 2048,
281 .flash_width = 16,
282 .dfc_width = 16,
283 .num_blocks = 2048,
284 .chip_id = 0xba20,
287 static struct pxa3xx_nand_flash *builtin_flash_types[] = {
288 &samsung512MbX16,
289 &micron1GbX8,
290 &micron1GbX16,
291 &stm2GbX16,
293 #endif /* CONFIG_MTD_NAND_PXA3xx_BUILTIN */
295 #define NDTR0_tCH(c) (min((c), 7) << 19)
296 #define NDTR0_tCS(c) (min((c), 7) << 16)
297 #define NDTR0_tWH(c) (min((c), 7) << 11)
298 #define NDTR0_tWP(c) (min((c), 7) << 8)
299 #define NDTR0_tRH(c) (min((c), 7) << 3)
300 #define NDTR0_tRP(c) (min((c), 7) << 0)
302 #define NDTR1_tR(c) (min((c), 65535) << 16)
303 #define NDTR1_tWHR(c) (min((c), 15) << 4)
304 #define NDTR1_tAR(c) (min((c), 15) << 0)
306 #define tCH_NDTR0(r) (((r) >> 19) & 0x7)
307 #define tCS_NDTR0(r) (((r) >> 16) & 0x7)
308 #define tWH_NDTR0(r) (((r) >> 11) & 0x7)
309 #define tWP_NDTR0(r) (((r) >> 8) & 0x7)
310 #define tRH_NDTR0(r) (((r) >> 3) & 0x7)
311 #define tRP_NDTR0(r) (((r) >> 0) & 0x7)
313 #define tR_NDTR1(r) (((r) >> 16) & 0xffff)
314 #define tWHR_NDTR1(r) (((r) >> 4) & 0xf)
315 #define tAR_NDTR1(r) (((r) >> 0) & 0xf)
317 /* convert nano-seconds to nand flash controller clock cycles */
318 #define ns2cycle(ns, clk) (int)(((ns) * (clk / 1000000) / 1000) - 1)
320 /* convert nand flash controller clock cycles to nano-seconds */
321 #define cycle2ns(c, clk) ((((c) + 1) * 1000000 + clk / 500) / (clk / 1000))
323 static void pxa3xx_nand_set_timing(struct pxa3xx_nand_info *info,
324 const struct pxa3xx_nand_timing *t)
326 unsigned long nand_clk = clk_get_rate(info->clk);
327 uint32_t ndtr0, ndtr1;
329 ndtr0 = NDTR0_tCH(ns2cycle(t->tCH, nand_clk)) |
330 NDTR0_tCS(ns2cycle(t->tCS, nand_clk)) |
331 NDTR0_tWH(ns2cycle(t->tWH, nand_clk)) |
332 NDTR0_tWP(ns2cycle(t->tWP, nand_clk)) |
333 NDTR0_tRH(ns2cycle(t->tRH, nand_clk)) |
334 NDTR0_tRP(ns2cycle(t->tRP, nand_clk));
336 ndtr1 = NDTR1_tR(ns2cycle(t->tR, nand_clk)) |
337 NDTR1_tWHR(ns2cycle(t->tWHR, nand_clk)) |
338 NDTR1_tAR(ns2cycle(t->tAR, nand_clk));
340 nand_writel(info, NDTR0CS0, ndtr0);
341 nand_writel(info, NDTR1CS0, ndtr1);
344 #define WAIT_EVENT_TIMEOUT 10
346 static int wait_for_event(struct pxa3xx_nand_info *info, uint32_t event)
348 int timeout = WAIT_EVENT_TIMEOUT;
349 uint32_t ndsr;
351 while (timeout--) {
352 ndsr = nand_readl(info, NDSR) & NDSR_MASK;
353 if (ndsr & event) {
354 nand_writel(info, NDSR, ndsr);
355 return 0;
357 udelay(10);
360 return -ETIMEDOUT;
363 static int prepare_read_prog_cmd(struct pxa3xx_nand_info *info,
364 uint16_t cmd, int column, int page_addr)
366 const struct pxa3xx_nand_flash *f = info->flash_info;
367 const struct pxa3xx_nand_cmdset *cmdset = f->cmdset;
369 /* calculate data size */
370 switch (f->page_size) {
371 case 2048:
372 info->data_size = (info->use_ecc) ? 2088 : 2112;
373 break;
374 case 512:
375 info->data_size = (info->use_ecc) ? 520 : 528;
376 break;
377 default:
378 return -EINVAL;
381 /* generate values for NDCBx registers */
382 info->ndcb0 = cmd | ((cmd & 0xff00) ? NDCB0_DBC : 0);
383 info->ndcb1 = 0;
384 info->ndcb2 = 0;
385 info->ndcb0 |= NDCB0_ADDR_CYC(info->row_addr_cycles + info->col_addr_cycles);
387 if (info->col_addr_cycles == 2) {
388 /* large block, 2 cycles for column address
389 * row address starts from 3rd cycle
391 info->ndcb1 |= page_addr << 16;
392 if (info->row_addr_cycles == 3)
393 info->ndcb2 = (page_addr >> 16) & 0xff;
394 } else
395 /* small block, 1 cycles for column address
396 * row address starts from 2nd cycle
398 info->ndcb1 = page_addr << 8;
400 if (cmd == cmdset->program)
401 info->ndcb0 |= NDCB0_CMD_TYPE(1) | NDCB0_AUTO_RS;
403 return 0;
406 static int prepare_erase_cmd(struct pxa3xx_nand_info *info,
407 uint16_t cmd, int page_addr)
409 info->ndcb0 = cmd | ((cmd & 0xff00) ? NDCB0_DBC : 0);
410 info->ndcb0 |= NDCB0_CMD_TYPE(2) | NDCB0_AUTO_RS | NDCB0_ADDR_CYC(3);
411 info->ndcb1 = page_addr;
412 info->ndcb2 = 0;
413 return 0;
416 static int prepare_other_cmd(struct pxa3xx_nand_info *info, uint16_t cmd)
418 const struct pxa3xx_nand_cmdset *cmdset = info->flash_info->cmdset;
420 info->ndcb0 = cmd | ((cmd & 0xff00) ? NDCB0_DBC : 0);
421 info->ndcb1 = 0;
422 info->ndcb2 = 0;
424 if (cmd == cmdset->read_id) {
425 info->ndcb0 |= NDCB0_CMD_TYPE(3);
426 info->data_size = 8;
427 } else if (cmd == cmdset->read_status) {
428 info->ndcb0 |= NDCB0_CMD_TYPE(4);
429 info->data_size = 8;
430 } else if (cmd == cmdset->reset || cmd == cmdset->lock ||
431 cmd == cmdset->unlock) {
432 info->ndcb0 |= NDCB0_CMD_TYPE(5);
433 } else
434 return -EINVAL;
436 return 0;
439 static void enable_int(struct pxa3xx_nand_info *info, uint32_t int_mask)
441 uint32_t ndcr;
443 ndcr = nand_readl(info, NDCR);
444 nand_writel(info, NDCR, ndcr & ~int_mask);
447 static void disable_int(struct pxa3xx_nand_info *info, uint32_t int_mask)
449 uint32_t ndcr;
451 ndcr = nand_readl(info, NDCR);
452 nand_writel(info, NDCR, ndcr | int_mask);
455 /* NOTE: it is a must to set ND_RUN firstly, then write command buffer
456 * otherwise, it does not work
458 static int write_cmd(struct pxa3xx_nand_info *info)
460 uint32_t ndcr;
462 /* clear status bits and run */
463 nand_writel(info, NDSR, NDSR_MASK);
465 ndcr = info->reg_ndcr;
467 ndcr |= info->use_ecc ? NDCR_ECC_EN : 0;
468 ndcr |= info->use_dma ? NDCR_DMA_EN : 0;
469 ndcr |= NDCR_ND_RUN;
471 nand_writel(info, NDCR, ndcr);
473 if (wait_for_event(info, NDSR_WRCMDREQ)) {
474 printk(KERN_ERR "timed out writing command\n");
475 return -ETIMEDOUT;
478 nand_writel(info, NDCB0, info->ndcb0);
479 nand_writel(info, NDCB0, info->ndcb1);
480 nand_writel(info, NDCB0, info->ndcb2);
481 return 0;
484 static int handle_data_pio(struct pxa3xx_nand_info *info)
486 int ret, timeout = CHIP_DELAY_TIMEOUT;
488 switch (info->state) {
489 case STATE_PIO_WRITING:
490 __raw_writesl(info->mmio_base + NDDB, info->data_buff,
491 info->data_size << 2);
493 enable_int(info, NDSR_CS0_BBD | NDSR_CS0_CMDD);
495 ret = wait_for_completion_timeout(&info->cmd_complete, timeout);
496 if (!ret) {
497 printk(KERN_ERR "program command time out\n");
498 return -1;
500 break;
501 case STATE_PIO_READING:
502 __raw_readsl(info->mmio_base + NDDB, info->data_buff,
503 info->data_size << 2);
504 break;
505 default:
506 printk(KERN_ERR "%s: invalid state %d\n", __func__,
507 info->state);
508 return -EINVAL;
511 info->state = STATE_READY;
512 return 0;
515 static void start_data_dma(struct pxa3xx_nand_info *info, int dir_out)
517 struct pxa_dma_desc *desc = info->data_desc;
518 int dma_len = ALIGN(info->data_size, 32);
520 desc->ddadr = DDADR_STOP;
521 desc->dcmd = DCMD_ENDIRQEN | DCMD_WIDTH4 | DCMD_BURST32 | dma_len;
523 if (dir_out) {
524 desc->dsadr = info->data_buff_phys;
525 desc->dtadr = NDDB_DMA_ADDR;
526 desc->dcmd |= DCMD_INCSRCADDR | DCMD_FLOWTRG;
527 } else {
528 desc->dtadr = info->data_buff_phys;
529 desc->dsadr = NDDB_DMA_ADDR;
530 desc->dcmd |= DCMD_INCTRGADDR | DCMD_FLOWSRC;
533 DRCMR(info->drcmr_dat) = DRCMR_MAPVLD | info->data_dma_ch;
534 DDADR(info->data_dma_ch) = info->data_desc_addr;
535 DCSR(info->data_dma_ch) |= DCSR_RUN;
538 static void pxa3xx_nand_data_dma_irq(int channel, void *data)
540 struct pxa3xx_nand_info *info = data;
541 uint32_t dcsr;
543 dcsr = DCSR(channel);
544 DCSR(channel) = dcsr;
546 if (dcsr & DCSR_BUSERR) {
547 info->retcode = ERR_DMABUSERR;
548 complete(&info->cmd_complete);
551 if (info->state == STATE_DMA_WRITING) {
552 info->state = STATE_DMA_DONE;
553 enable_int(info, NDSR_CS0_BBD | NDSR_CS0_CMDD);
554 } else {
555 info->state = STATE_READY;
556 complete(&info->cmd_complete);
560 static irqreturn_t pxa3xx_nand_irq(int irq, void *devid)
562 struct pxa3xx_nand_info *info = devid;
563 unsigned int status;
565 status = nand_readl(info, NDSR);
567 if (status & (NDSR_RDDREQ | NDSR_DBERR)) {
568 if (status & NDSR_DBERR)
569 info->retcode = ERR_DBERR;
571 disable_int(info, NDSR_RDDREQ | NDSR_DBERR);
573 if (info->use_dma) {
574 info->state = STATE_DMA_READING;
575 start_data_dma(info, 0);
576 } else {
577 info->state = STATE_PIO_READING;
578 complete(&info->cmd_complete);
580 } else if (status & NDSR_WRDREQ) {
581 disable_int(info, NDSR_WRDREQ);
582 if (info->use_dma) {
583 info->state = STATE_DMA_WRITING;
584 start_data_dma(info, 1);
585 } else {
586 info->state = STATE_PIO_WRITING;
587 complete(&info->cmd_complete);
589 } else if (status & (NDSR_CS0_BBD | NDSR_CS0_CMDD)) {
590 if (status & NDSR_CS0_BBD)
591 info->retcode = ERR_BBERR;
593 disable_int(info, NDSR_CS0_BBD | NDSR_CS0_CMDD);
594 info->state = STATE_READY;
595 complete(&info->cmd_complete);
597 nand_writel(info, NDSR, status);
598 return IRQ_HANDLED;
601 static int pxa3xx_nand_do_cmd(struct pxa3xx_nand_info *info, uint32_t event)
603 uint32_t ndcr;
604 int ret, timeout = CHIP_DELAY_TIMEOUT;
606 if (write_cmd(info)) {
607 info->retcode = ERR_SENDCMD;
608 goto fail_stop;
611 info->state = STATE_CMD_HANDLE;
613 enable_int(info, event);
615 ret = wait_for_completion_timeout(&info->cmd_complete, timeout);
616 if (!ret) {
617 printk(KERN_ERR "command execution timed out\n");
618 info->retcode = ERR_SENDCMD;
619 goto fail_stop;
622 if (info->use_dma == 0 && info->data_size > 0)
623 if (handle_data_pio(info))
624 goto fail_stop;
626 return 0;
628 fail_stop:
629 ndcr = nand_readl(info, NDCR);
630 nand_writel(info, NDCR, ndcr & ~NDCR_ND_RUN);
631 udelay(10);
632 return -ETIMEDOUT;
635 static int pxa3xx_nand_dev_ready(struct mtd_info *mtd)
637 struct pxa3xx_nand_info *info = mtd->priv;
638 return (nand_readl(info, NDSR) & NDSR_RDY) ? 1 : 0;
641 static inline int is_buf_blank(uint8_t *buf, size_t len)
643 for (; len > 0; len--)
644 if (*buf++ != 0xff)
645 return 0;
646 return 1;
649 static void pxa3xx_nand_cmdfunc(struct mtd_info *mtd, unsigned command,
650 int column, int page_addr)
652 struct pxa3xx_nand_info *info = mtd->priv;
653 const struct pxa3xx_nand_flash *flash_info = info->flash_info;
654 const struct pxa3xx_nand_cmdset *cmdset = flash_info->cmdset;
655 int ret;
657 info->use_dma = (use_dma) ? 1 : 0;
658 info->use_ecc = 0;
659 info->data_size = 0;
660 info->state = STATE_READY;
662 init_completion(&info->cmd_complete);
664 switch (command) {
665 case NAND_CMD_READOOB:
666 /* disable HW ECC to get all the OOB data */
667 info->buf_count = mtd->writesize + mtd->oobsize;
668 info->buf_start = mtd->writesize + column;
670 if (prepare_read_prog_cmd(info, cmdset->read1, column, page_addr))
671 break;
673 pxa3xx_nand_do_cmd(info, NDSR_RDDREQ | NDSR_DBERR);
675 /* We only are OOB, so if the data has error, does not matter */
676 if (info->retcode == ERR_DBERR)
677 info->retcode = ERR_NONE;
678 break;
680 case NAND_CMD_READ0:
681 info->use_ecc = 1;
682 info->retcode = ERR_NONE;
683 info->buf_start = column;
684 info->buf_count = mtd->writesize + mtd->oobsize;
685 memset(info->data_buff, 0xFF, info->buf_count);
687 if (prepare_read_prog_cmd(info, cmdset->read1, column, page_addr))
688 break;
690 pxa3xx_nand_do_cmd(info, NDSR_RDDREQ | NDSR_DBERR);
692 if (info->retcode == ERR_DBERR) {
693 /* for blank page (all 0xff), HW will calculate its ECC as
694 * 0, which is different from the ECC information within
695 * OOB, ignore such double bit errors
697 if (is_buf_blank(info->data_buff, mtd->writesize))
698 info->retcode = ERR_NONE;
700 break;
701 case NAND_CMD_SEQIN:
702 info->buf_start = column;
703 info->buf_count = mtd->writesize + mtd->oobsize;
704 memset(info->data_buff, 0xff, info->buf_count);
706 /* save column/page_addr for next CMD_PAGEPROG */
707 info->seqin_column = column;
708 info->seqin_page_addr = page_addr;
709 break;
710 case NAND_CMD_PAGEPROG:
711 info->use_ecc = (info->seqin_column >= mtd->writesize) ? 0 : 1;
713 if (prepare_read_prog_cmd(info, cmdset->program,
714 info->seqin_column, info->seqin_page_addr))
715 break;
717 pxa3xx_nand_do_cmd(info, NDSR_WRDREQ);
718 break;
719 case NAND_CMD_ERASE1:
720 if (prepare_erase_cmd(info, cmdset->erase, page_addr))
721 break;
723 pxa3xx_nand_do_cmd(info, NDSR_CS0_BBD | NDSR_CS0_CMDD);
724 break;
725 case NAND_CMD_ERASE2:
726 break;
727 case NAND_CMD_READID:
728 case NAND_CMD_STATUS:
729 info->use_dma = 0; /* force PIO read */
730 info->buf_start = 0;
731 info->buf_count = (command == NAND_CMD_READID) ?
732 info->read_id_bytes : 1;
734 if (prepare_other_cmd(info, (command == NAND_CMD_READID) ?
735 cmdset->read_id : cmdset->read_status))
736 break;
738 pxa3xx_nand_do_cmd(info, NDSR_RDDREQ);
739 break;
740 case NAND_CMD_RESET:
741 if (prepare_other_cmd(info, cmdset->reset))
742 break;
744 ret = pxa3xx_nand_do_cmd(info, NDSR_CS0_CMDD);
745 if (ret == 0) {
746 int timeout = 2;
747 uint32_t ndcr;
749 while (timeout--) {
750 if (nand_readl(info, NDSR) & NDSR_RDY)
751 break;
752 msleep(10);
755 ndcr = nand_readl(info, NDCR);
756 nand_writel(info, NDCR, ndcr & ~NDCR_ND_RUN);
758 break;
759 default:
760 printk(KERN_ERR "non-supported command.\n");
761 break;
764 if (info->retcode == ERR_DBERR) {
765 printk(KERN_ERR "double bit error @ page %08x\n", page_addr);
766 info->retcode = ERR_NONE;
770 static uint8_t pxa3xx_nand_read_byte(struct mtd_info *mtd)
772 struct pxa3xx_nand_info *info = mtd->priv;
773 char retval = 0xFF;
775 if (info->buf_start < info->buf_count)
776 /* Has just send a new command? */
777 retval = info->data_buff[info->buf_start++];
779 return retval;
782 static u16 pxa3xx_nand_read_word(struct mtd_info *mtd)
784 struct pxa3xx_nand_info *info = mtd->priv;
785 u16 retval = 0xFFFF;
787 if (!(info->buf_start & 0x01) && info->buf_start < info->buf_count) {
788 retval = *((u16 *)(info->data_buff+info->buf_start));
789 info->buf_start += 2;
791 return retval;
794 static void pxa3xx_nand_read_buf(struct mtd_info *mtd, uint8_t *buf, int len)
796 struct pxa3xx_nand_info *info = mtd->priv;
797 int real_len = min_t(size_t, len, info->buf_count - info->buf_start);
799 memcpy(buf, info->data_buff + info->buf_start, real_len);
800 info->buf_start += real_len;
803 static void pxa3xx_nand_write_buf(struct mtd_info *mtd,
804 const uint8_t *buf, int len)
806 struct pxa3xx_nand_info *info = mtd->priv;
807 int real_len = min_t(size_t, len, info->buf_count - info->buf_start);
809 memcpy(info->data_buff + info->buf_start, buf, real_len);
810 info->buf_start += real_len;
813 static int pxa3xx_nand_verify_buf(struct mtd_info *mtd,
814 const uint8_t *buf, int len)
816 return 0;
819 static void pxa3xx_nand_select_chip(struct mtd_info *mtd, int chip)
821 return;
824 static int pxa3xx_nand_waitfunc(struct mtd_info *mtd, struct nand_chip *this)
826 struct pxa3xx_nand_info *info = mtd->priv;
828 /* pxa3xx_nand_send_command has waited for command complete */
829 if (this->state == FL_WRITING || this->state == FL_ERASING) {
830 if (info->retcode == ERR_NONE)
831 return 0;
832 else {
834 * any error make it return 0x01 which will tell
835 * the caller the erase and write fail
837 return 0x01;
841 return 0;
844 static void pxa3xx_nand_ecc_hwctl(struct mtd_info *mtd, int mode)
846 return;
849 static int pxa3xx_nand_ecc_calculate(struct mtd_info *mtd,
850 const uint8_t *dat, uint8_t *ecc_code)
852 return 0;
855 static int pxa3xx_nand_ecc_correct(struct mtd_info *mtd,
856 uint8_t *dat, uint8_t *read_ecc, uint8_t *calc_ecc)
858 struct pxa3xx_nand_info *info = mtd->priv;
860 * Any error include ERR_SEND_CMD, ERR_DBERR, ERR_BUSERR, we
861 * consider it as a ecc error which will tell the caller the
862 * read fail We have distinguish all the errors, but the
863 * nand_read_ecc only check this function return value
865 if (info->retcode != ERR_NONE)
866 return -1;
868 return 0;
871 static int __readid(struct pxa3xx_nand_info *info, uint32_t *id)
873 const struct pxa3xx_nand_flash *f = info->flash_info;
874 const struct pxa3xx_nand_cmdset *cmdset = f->cmdset;
875 uint32_t ndcr;
876 uint8_t id_buff[8];
878 if (prepare_other_cmd(info, cmdset->read_id)) {
879 printk(KERN_ERR "failed to prepare command\n");
880 return -EINVAL;
883 /* Send command */
884 if (write_cmd(info))
885 goto fail_timeout;
887 /* Wait for CMDDM(command done successfully) */
888 if (wait_for_event(info, NDSR_RDDREQ))
889 goto fail_timeout;
891 __raw_readsl(info->mmio_base + NDDB, id_buff, 2);
892 *id = id_buff[0] | (id_buff[1] << 8);
893 return 0;
895 fail_timeout:
896 ndcr = nand_readl(info, NDCR);
897 nand_writel(info, NDCR, ndcr & ~NDCR_ND_RUN);
898 udelay(10);
899 return -ETIMEDOUT;
902 static int pxa3xx_nand_config_flash(struct pxa3xx_nand_info *info,
903 const struct pxa3xx_nand_flash *f)
905 struct platform_device *pdev = info->pdev;
906 struct pxa3xx_nand_platform_data *pdata = pdev->dev.platform_data;
907 uint32_t ndcr = 0x00000FFF; /* disable all interrupts */
909 if (f->page_size != 2048 && f->page_size != 512)
910 return -EINVAL;
912 if (f->flash_width != 16 && f->flash_width != 8)
913 return -EINVAL;
915 /* calculate flash information */
916 info->oob_size = (f->page_size == 2048) ? 64 : 16;
917 info->read_id_bytes = (f->page_size == 2048) ? 4 : 2;
919 /* calculate addressing information */
920 info->col_addr_cycles = (f->page_size == 2048) ? 2 : 1;
922 if (f->num_blocks * f->page_per_block > 65536)
923 info->row_addr_cycles = 3;
924 else
925 info->row_addr_cycles = 2;
927 ndcr |= (pdata->enable_arbiter) ? NDCR_ND_ARB_EN : 0;
928 ndcr |= (info->col_addr_cycles == 2) ? NDCR_RA_START : 0;
929 ndcr |= (f->page_per_block == 64) ? NDCR_PG_PER_BLK : 0;
930 ndcr |= (f->page_size == 2048) ? NDCR_PAGE_SZ : 0;
931 ndcr |= (f->flash_width == 16) ? NDCR_DWIDTH_M : 0;
932 ndcr |= (f->dfc_width == 16) ? NDCR_DWIDTH_C : 0;
934 ndcr |= NDCR_RD_ID_CNT(info->read_id_bytes);
935 ndcr |= NDCR_SPARE_EN; /* enable spare by default */
937 info->reg_ndcr = ndcr;
939 pxa3xx_nand_set_timing(info, f->timing);
940 info->flash_info = f;
941 return 0;
944 static void pxa3xx_nand_detect_timing(struct pxa3xx_nand_info *info,
945 struct pxa3xx_nand_timing *t)
947 unsigned long nand_clk = clk_get_rate(info->clk);
948 uint32_t ndtr0 = nand_readl(info, NDTR0CS0);
949 uint32_t ndtr1 = nand_readl(info, NDTR1CS0);
951 t->tCH = cycle2ns(tCH_NDTR0(ndtr0), nand_clk);
952 t->tCS = cycle2ns(tCS_NDTR0(ndtr0), nand_clk);
953 t->tWH = cycle2ns(tWH_NDTR0(ndtr0), nand_clk);
954 t->tWP = cycle2ns(tWP_NDTR0(ndtr0), nand_clk);
955 t->tRH = cycle2ns(tRH_NDTR0(ndtr0), nand_clk);
956 t->tRP = cycle2ns(tRP_NDTR0(ndtr0), nand_clk);
958 t->tR = cycle2ns(tR_NDTR1(ndtr1), nand_clk);
959 t->tWHR = cycle2ns(tWHR_NDTR1(ndtr1), nand_clk);
960 t->tAR = cycle2ns(tAR_NDTR1(ndtr1), nand_clk);
963 static int pxa3xx_nand_detect_config(struct pxa3xx_nand_info *info)
965 uint32_t ndcr = nand_readl(info, NDCR);
966 struct nand_flash_dev *type = NULL;
967 uint32_t id = -1;
968 int i;
970 default_flash.page_per_block = ndcr & NDCR_PG_PER_BLK ? 64 : 32;
971 default_flash.page_size = ndcr & NDCR_PAGE_SZ ? 2048 : 512;
972 default_flash.flash_width = ndcr & NDCR_DWIDTH_M ? 16 : 8;
973 default_flash.dfc_width = ndcr & NDCR_DWIDTH_C ? 16 : 8;
975 if (default_flash.page_size == 2048)
976 default_flash.cmdset = &largepage_cmdset;
977 else
978 default_flash.cmdset = &smallpage_cmdset;
980 /* set info fields needed to __readid */
981 info->flash_info = &default_flash;
982 info->read_id_bytes = (default_flash.page_size == 2048) ? 4 : 2;
983 info->reg_ndcr = ndcr;
985 if (__readid(info, &id))
986 return -ENODEV;
988 /* Lookup the flash id */
989 id = (id >> 8) & 0xff; /* device id is byte 2 */
990 for (i = 0; nand_flash_ids[i].name != NULL; i++) {
991 if (id == nand_flash_ids[i].id) {
992 type = &nand_flash_ids[i];
993 break;
997 if (!type)
998 return -ENODEV;
1000 /* fill the missing flash information */
1001 i = __ffs(default_flash.page_per_block * default_flash.page_size);
1002 default_flash.num_blocks = type->chipsize << (20 - i);
1004 info->oob_size = (default_flash.page_size == 2048) ? 64 : 16;
1006 /* calculate addressing information */
1007 info->col_addr_cycles = (default_flash.page_size == 2048) ? 2 : 1;
1009 if (default_flash.num_blocks * default_flash.page_per_block > 65536)
1010 info->row_addr_cycles = 3;
1011 else
1012 info->row_addr_cycles = 2;
1014 pxa3xx_nand_detect_timing(info, &default_timing);
1015 default_flash.timing = &default_timing;
1017 return 0;
1020 static int pxa3xx_nand_detect_flash(struct pxa3xx_nand_info *info,
1021 const struct pxa3xx_nand_platform_data *pdata)
1023 const struct pxa3xx_nand_flash *f;
1024 uint32_t id = -1;
1025 int i;
1027 if (pdata->keep_config)
1028 if (pxa3xx_nand_detect_config(info) == 0)
1029 return 0;
1031 for (i = 0; i<pdata->num_flash; ++i) {
1032 f = pdata->flash + i;
1034 if (pxa3xx_nand_config_flash(info, f))
1035 continue;
1037 if (__readid(info, &id))
1038 continue;
1040 if (id == f->chip_id)
1041 return 0;
1044 #ifdef CONFIG_MTD_NAND_PXA3xx_BUILTIN
1045 for (i = 0; i < ARRAY_SIZE(builtin_flash_types); i++) {
1047 f = builtin_flash_types[i];
1049 if (pxa3xx_nand_config_flash(info, f))
1050 continue;
1052 if (__readid(info, &id))
1053 continue;
1055 if (id == f->chip_id)
1056 return 0;
1058 #endif
1060 dev_warn(&info->pdev->dev,
1061 "failed to detect configured nand flash; found %04x instead of\n",
1062 id);
1063 return -ENODEV;
1066 /* the maximum possible buffer size for large page with OOB data
1067 * is: 2048 + 64 = 2112 bytes, allocate a page here for both the
1068 * data buffer and the DMA descriptor
1070 #define MAX_BUFF_SIZE PAGE_SIZE
1072 static int pxa3xx_nand_init_buff(struct pxa3xx_nand_info *info)
1074 struct platform_device *pdev = info->pdev;
1075 int data_desc_offset = MAX_BUFF_SIZE - sizeof(struct pxa_dma_desc);
1077 if (use_dma == 0) {
1078 info->data_buff = kmalloc(MAX_BUFF_SIZE, GFP_KERNEL);
1079 if (info->data_buff == NULL)
1080 return -ENOMEM;
1081 return 0;
1084 info->data_buff = dma_alloc_coherent(&pdev->dev, MAX_BUFF_SIZE,
1085 &info->data_buff_phys, GFP_KERNEL);
1086 if (info->data_buff == NULL) {
1087 dev_err(&pdev->dev, "failed to allocate dma buffer\n");
1088 return -ENOMEM;
1091 info->data_buff_size = MAX_BUFF_SIZE;
1092 info->data_desc = (void *)info->data_buff + data_desc_offset;
1093 info->data_desc_addr = info->data_buff_phys + data_desc_offset;
1095 info->data_dma_ch = pxa_request_dma("nand-data", DMA_PRIO_LOW,
1096 pxa3xx_nand_data_dma_irq, info);
1097 if (info->data_dma_ch < 0) {
1098 dev_err(&pdev->dev, "failed to request data dma\n");
1099 dma_free_coherent(&pdev->dev, info->data_buff_size,
1100 info->data_buff, info->data_buff_phys);
1101 return info->data_dma_ch;
1104 return 0;
1107 static struct nand_ecclayout hw_smallpage_ecclayout = {
1108 .eccbytes = 6,
1109 .eccpos = {8, 9, 10, 11, 12, 13 },
1110 .oobfree = { {2, 6} }
1113 static struct nand_ecclayout hw_largepage_ecclayout = {
1114 .eccbytes = 24,
1115 .eccpos = {
1116 40, 41, 42, 43, 44, 45, 46, 47,
1117 48, 49, 50, 51, 52, 53, 54, 55,
1118 56, 57, 58, 59, 60, 61, 62, 63},
1119 .oobfree = { {2, 38} }
1122 static void pxa3xx_nand_init_mtd(struct mtd_info *mtd,
1123 struct pxa3xx_nand_info *info)
1125 const struct pxa3xx_nand_flash *f = info->flash_info;
1126 struct nand_chip *this = &info->nand_chip;
1128 this->options = (f->flash_width == 16) ? NAND_BUSWIDTH_16: 0;
1130 this->waitfunc = pxa3xx_nand_waitfunc;
1131 this->select_chip = pxa3xx_nand_select_chip;
1132 this->dev_ready = pxa3xx_nand_dev_ready;
1133 this->cmdfunc = pxa3xx_nand_cmdfunc;
1134 this->read_word = pxa3xx_nand_read_word;
1135 this->read_byte = pxa3xx_nand_read_byte;
1136 this->read_buf = pxa3xx_nand_read_buf;
1137 this->write_buf = pxa3xx_nand_write_buf;
1138 this->verify_buf = pxa3xx_nand_verify_buf;
1140 this->ecc.mode = NAND_ECC_HW;
1141 this->ecc.hwctl = pxa3xx_nand_ecc_hwctl;
1142 this->ecc.calculate = pxa3xx_nand_ecc_calculate;
1143 this->ecc.correct = pxa3xx_nand_ecc_correct;
1144 this->ecc.size = f->page_size;
1146 if (f->page_size == 2048)
1147 this->ecc.layout = &hw_largepage_ecclayout;
1148 else
1149 this->ecc.layout = &hw_smallpage_ecclayout;
1151 this->chip_delay = 25;
1154 static int pxa3xx_nand_probe(struct platform_device *pdev)
1156 struct pxa3xx_nand_platform_data *pdata;
1157 struct pxa3xx_nand_info *info;
1158 struct nand_chip *this;
1159 struct mtd_info *mtd;
1160 struct resource *r;
1161 int ret = 0, irq;
1163 pdata = pdev->dev.platform_data;
1165 if (!pdata) {
1166 dev_err(&pdev->dev, "no platform data defined\n");
1167 return -ENODEV;
1170 mtd = kzalloc(sizeof(struct mtd_info) + sizeof(struct pxa3xx_nand_info),
1171 GFP_KERNEL);
1172 if (!mtd) {
1173 dev_err(&pdev->dev, "failed to allocate memory\n");
1174 return -ENOMEM;
1177 info = (struct pxa3xx_nand_info *)(&mtd[1]);
1178 info->pdev = pdev;
1180 this = &info->nand_chip;
1181 mtd->priv = info;
1182 mtd->owner = THIS_MODULE;
1184 info->clk = clk_get(&pdev->dev, NULL);
1185 if (IS_ERR(info->clk)) {
1186 dev_err(&pdev->dev, "failed to get nand clock\n");
1187 ret = PTR_ERR(info->clk);
1188 goto fail_free_mtd;
1190 clk_enable(info->clk);
1192 r = platform_get_resource(pdev, IORESOURCE_DMA, 0);
1193 if (r == NULL) {
1194 dev_err(&pdev->dev, "no resource defined for data DMA\n");
1195 ret = -ENXIO;
1196 goto fail_put_clk;
1198 info->drcmr_dat = r->start;
1200 r = platform_get_resource(pdev, IORESOURCE_DMA, 1);
1201 if (r == NULL) {
1202 dev_err(&pdev->dev, "no resource defined for command DMA\n");
1203 ret = -ENXIO;
1204 goto fail_put_clk;
1206 info->drcmr_cmd = r->start;
1208 irq = platform_get_irq(pdev, 0);
1209 if (irq < 0) {
1210 dev_err(&pdev->dev, "no IRQ resource defined\n");
1211 ret = -ENXIO;
1212 goto fail_put_clk;
1215 r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
1216 if (r == NULL) {
1217 dev_err(&pdev->dev, "no IO memory resource defined\n");
1218 ret = -ENODEV;
1219 goto fail_put_clk;
1222 r = request_mem_region(r->start, resource_size(r), pdev->name);
1223 if (r == NULL) {
1224 dev_err(&pdev->dev, "failed to request memory resource\n");
1225 ret = -EBUSY;
1226 goto fail_put_clk;
1229 info->mmio_base = ioremap(r->start, resource_size(r));
1230 if (info->mmio_base == NULL) {
1231 dev_err(&pdev->dev, "ioremap() failed\n");
1232 ret = -ENODEV;
1233 goto fail_free_res;
1236 ret = pxa3xx_nand_init_buff(info);
1237 if (ret)
1238 goto fail_free_io;
1240 ret = request_irq(IRQ_NAND, pxa3xx_nand_irq, IRQF_DISABLED,
1241 pdev->name, info);
1242 if (ret < 0) {
1243 dev_err(&pdev->dev, "failed to request IRQ\n");
1244 goto fail_free_buf;
1247 ret = pxa3xx_nand_detect_flash(info, pdata);
1248 if (ret) {
1249 dev_err(&pdev->dev, "failed to detect flash\n");
1250 ret = -ENODEV;
1251 goto fail_free_irq;
1254 pxa3xx_nand_init_mtd(mtd, info);
1256 platform_set_drvdata(pdev, mtd);
1258 if (nand_scan(mtd, 1)) {
1259 dev_err(&pdev->dev, "failed to scan nand\n");
1260 ret = -ENXIO;
1261 goto fail_free_irq;
1264 return add_mtd_partitions(mtd, pdata->parts, pdata->nr_parts);
1266 fail_free_irq:
1267 free_irq(IRQ_NAND, info);
1268 fail_free_buf:
1269 if (use_dma) {
1270 pxa_free_dma(info->data_dma_ch);
1271 dma_free_coherent(&pdev->dev, info->data_buff_size,
1272 info->data_buff, info->data_buff_phys);
1273 } else
1274 kfree(info->data_buff);
1275 fail_free_io:
1276 iounmap(info->mmio_base);
1277 fail_free_res:
1278 release_mem_region(r->start, resource_size(r));
1279 fail_put_clk:
1280 clk_disable(info->clk);
1281 clk_put(info->clk);
1282 fail_free_mtd:
1283 kfree(mtd);
1284 return ret;
1287 static int pxa3xx_nand_remove(struct platform_device *pdev)
1289 struct mtd_info *mtd = platform_get_drvdata(pdev);
1290 struct pxa3xx_nand_info *info = mtd->priv;
1291 struct resource *r;
1293 platform_set_drvdata(pdev, NULL);
1295 del_mtd_device(mtd);
1296 del_mtd_partitions(mtd);
1297 free_irq(IRQ_NAND, info);
1298 if (use_dma) {
1299 pxa_free_dma(info->data_dma_ch);
1300 dma_free_writecombine(&pdev->dev, info->data_buff_size,
1301 info->data_buff, info->data_buff_phys);
1302 } else
1303 kfree(info->data_buff);
1305 iounmap(info->mmio_base);
1306 r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
1307 release_mem_region(r->start, resource_size(r));
1309 clk_disable(info->clk);
1310 clk_put(info->clk);
1312 kfree(mtd);
1313 return 0;
1316 #ifdef CONFIG_PM
1317 static int pxa3xx_nand_suspend(struct platform_device *pdev, pm_message_t state)
1319 struct mtd_info *mtd = (struct mtd_info *)platform_get_drvdata(pdev);
1320 struct pxa3xx_nand_info *info = mtd->priv;
1322 if (info->state != STATE_READY) {
1323 dev_err(&pdev->dev, "driver busy, state = %d\n", info->state);
1324 return -EAGAIN;
1327 return 0;
1330 static int pxa3xx_nand_resume(struct platform_device *pdev)
1332 struct mtd_info *mtd = (struct mtd_info *)platform_get_drvdata(pdev);
1333 struct pxa3xx_nand_info *info = mtd->priv;
1335 clk_enable(info->clk);
1337 return pxa3xx_nand_config_flash(info, info->flash_info);
1339 #else
1340 #define pxa3xx_nand_suspend NULL
1341 #define pxa3xx_nand_resume NULL
1342 #endif
1344 static struct platform_driver pxa3xx_nand_driver = {
1345 .driver = {
1346 .name = "pxa3xx-nand",
1348 .probe = pxa3xx_nand_probe,
1349 .remove = pxa3xx_nand_remove,
1350 .suspend = pxa3xx_nand_suspend,
1351 .resume = pxa3xx_nand_resume,
1354 static int __init pxa3xx_nand_init(void)
1356 return platform_driver_register(&pxa3xx_nand_driver);
1358 module_init(pxa3xx_nand_init);
1360 static void __exit pxa3xx_nand_exit(void)
1362 platform_driver_unregister(&pxa3xx_nand_driver);
1364 module_exit(pxa3xx_nand_exit);
1366 MODULE_LICENSE("GPL");
1367 MODULE_DESCRIPTION("PXA3xx NAND controller driver");