kernel/irq/autoprobe.c

   1 /*
   2  * linux/kernel/irq/autoprobe.c
   3  *
   4  * Copyright (C) 1992, 1998-2004 Linus Torvalds, Ingo Molnar
   5  *
   6  * This file contains the interrupt probing code and driver APIs.
   7  */
   8
   9 #include <linux/irq.h>
  10 #include <linux/module.h>
  11 #include <linux/interrupt.h>
  12 #include <linux/delay.h>
  13 #include <linux/async.h>
  14
  15 #include "internals.h"
  16
  17 /*
  18  * Autodetection depends on the fact that any interrupt that
  19  * comes in on to an unassigned handler will get stuck with
  20  * "IRQS_WAITING" cleared and the interrupt disabled.
  21  */
  22 static DEFINE_MUTEX(probing_active);
  23
  24 /**
  25  *      probe_irq_on    - begin an interrupt autodetect
  26  *
  27  *      Commence probing for an interrupt. The interrupts are scanned
  28  *      and a mask of potential interrupt lines is returned.
  29  *
  30  */
  31 unsigned long probe_irq_on(void)
  32 {
  33         struct irq_desc *desc;
  34         unsigned long mask = 0;
  35         int i;
  36
  37         /*
  38          * quiesce the kernel, or at least the asynchronous portion
  39          */
  40         async_synchronize_full();
  41         mutex_lock(&probing_active);
  42         /*
  43          * something may have generated an irq long ago and we want to
  44          * flush such a longstanding irq before considering it as spurious.
  45          */
  46         for_each_irq_desc_reverse(i, desc) {
  47                 raw_spin_lock_irq(&desc->lock);
  48                 if (!desc->action && irq_settings_can_probe(desc)) {
  49                         /*
  50                          * Some chips need to know about probing in
  51                          * progress:
  52                          */
  53                         if (desc->irq_data.chip->irq_set_type)
  54                                 desc->irq_data.chip->irq_set_type(&desc->irq_data,
  55                                                          IRQ_TYPE_PROBE);
  56                         irq_startup(desc);
  57                 }
  58                 raw_spin_unlock_irq(&desc->lock);
  59         }
  60
  61         /* Wait for longstanding interrupts to trigger. */
  62         msleep(20);
  63
  64         /*
  65          * enable any unassigned irqs
  66          * (we must startup again here because if a longstanding irq
  67          * happened in the previous stage, it may have masked itself)
  68          */
  69         for_each_irq_desc_reverse(i, desc) {
  70                 raw_spin_lock_irq(&desc->lock);
  71                 if (!desc->action && irq_settings_can_probe(desc)) {
  72                         desc->istate |= IRQS_AUTODETECT | IRQS_WAITING;
  73                         if (irq_startup(desc))
  74                                 desc->istate |= IRQS_PENDING;
  75                 }
  76                 raw_spin_unlock_irq(&desc->lock);
  77         }
  78
  79         /*
  80          * Wait for spurious interrupts to trigger
  81          */
  82         msleep(100);
  83
  84         /*
  85          * Now filter out any obviously spurious interrupts
  86          */
  87         for_each_irq_desc(i, desc) {
  88                 raw_spin_lock_irq(&desc->lock);
  89
  90                 if (desc->istate & IRQS_AUTODETECT) {
  91                         /* It triggered already - consider it spurious. */
  92                         if (!(desc->istate & IRQS_WAITING)) {
  93                                 desc->istate &= ~IRQS_AUTODETECT;
  94                                 irq_shutdown(desc);
  95                         } else
  96                                 if (i < 32)
  97                                         mask |= 1 << i;
  98                 }
  99                 raw_spin_unlock_irq(&desc->lock);
 100         }
 101
 102         return mask;
 103 }
 104 EXPORT_SYMBOL(probe_irq_on);
 105
 106 /**
 107  *      probe_irq_mask - scan a bitmap of interrupt lines
 108  *      @val:   mask of interrupts to consider
 109  *
 110  *      Scan the interrupt lines and return a bitmap of active
 111  *      autodetect interrupts. The interrupt probe logic state
 112  *      is then returned to its previous value.
 113  *
 114  *      Note: we need to scan all the irq's even though we will
 115  *      only return autodetect irq numbers - just so that we reset
 116  *      them all to a known state.
 117  */
 118 unsigned int probe_irq_mask(unsigned long val)
 119 {
 120         unsigned int mask = 0;
 121         struct irq_desc *desc;
 122         int i;
 123
 124         for_each_irq_desc(i, desc) {
 125                 raw_spin_lock_irq(&desc->lock);
 126                 if (desc->istate & IRQS_AUTODETECT) {
 127                         if (i < 16 && !(desc->istate & IRQS_WAITING))
 128                                 mask |= 1 << i;
 129
 130                         desc->istate &= ~IRQS_AUTODETECT;
 131                         irq_shutdown(desc);
 132                 }
 133                 raw_spin_unlock_irq(&desc->lock);
 134         }
 135         mutex_unlock(&probing_active);
 136
 137         return mask & val;
 138 }
 139 EXPORT_SYMBOL(probe_irq_mask);
 140
 141 /**
 142  *      probe_irq_off   - end an interrupt autodetect
 143  *      @val: mask of potential interrupts (unused)
 144  *
 145  *      Scans the unused interrupt lines and returns the line which
 146  *      appears to have triggered the interrupt. If no interrupt was
 147  *      found then zero is returned. If more than one interrupt is
 148  *      found then minus the first candidate is returned to indicate
 149  *      their is doubt.
 150  *
 151  *      The interrupt probe logic state is returned to its previous
 152  *      value.
 153  *
 154  *      BUGS: When used in a module (which arguably shouldn't happen)
 155  *      nothing prevents two IRQ probe callers from overlapping. The
 156  *      results of this are non-optimal.
 157  */
 158 int probe_irq_off(unsigned long val)
 159 {
 160         int i, irq_found = 0, nr_of_irqs = 0;
 161         struct irq_desc *desc;
 162
 163         for_each_irq_desc(i, desc) {
 164                 raw_spin_lock_irq(&desc->lock);
 165
 166                 if (desc->istate & IRQS_AUTODETECT) {
 167                         if (!(desc->istate & IRQS_WAITING)) {
 168                                 if (!nr_of_irqs)
 169                                         irq_found = i;
 170                                 nr_of_irqs++;
 171                         }
 172                         desc->istate &= ~IRQS_AUTODETECT;
 173                         irq_shutdown(desc);
 174                 }
 175                 raw_spin_unlock_irq(&desc->lock);
 176         }
 177         mutex_unlock(&probing_active);
 178
 179         if (nr_of_irqs > 1)
 180                 irq_found = -irq_found;
 181
 182         return irq_found;
 183 }
 184 EXPORT_SYMBOL(probe_irq_off);
 185