include/linux/mc146818rtc.h

   1 /* mc146818rtc.h - register definitions for the Real-Time-Clock / CMOS RAM
   2  * Copyright Torsten Duwe <duwe@informatik.uni-erlangen.de> 1993
   3  * derived from Data Sheet, Copyright Motorola 1984 (!).
   4  * It was written to be part of the Linux operating system.
   5  */
   6 /* permission is hereby granted to copy, modify and redistribute this code
   7  * in terms of the GNU Library General Public License, Version 2 or later,
   8  * at your option.
   9  */
  10
  11 #ifndef _MC146818RTC_H
  12 #define _MC146818RTC_H
  13
  14 #include <asm/io.h>
  15 #include <linux/rtc.h>                  /* get the user-level API */
  16 #include <asm/mc146818rtc.h>            /* register access macros */
  17
  18 #ifdef __KERNEL__
  19 #include <linux/spinlock.h>             /* spinlock_t */
  20 extern spinlock_t rtc_lock;             /* serialize CMOS RAM access */
  21
  22 /* Some RTCs extend the mc146818 register set to support alarms of more
  23  * than 24 hours in the future; or dates that include a century code.
  24  * This platform_data structure can pass this information to the driver.
  25  *
  26  * Also, some platforms need suspend()/resume() hooks to kick in special
  27  * handling of wake alarms, e.g. activating ACPI BIOS hooks or setting up
  28  * a separate wakeup alarm used by some almost-clone chips.
  29  */
  30 struct cmos_rtc_board_info {
  31         void    (*wake_on)(struct device *dev);
  32         void    (*wake_off)(struct device *dev);
  33
  34         u8      rtc_day_alarm;          /* zero, or register index */
  35         u8      rtc_mon_alarm;          /* zero, or register index */
  36         u8      rtc_century;            /* zero, or register index */
  37 };
  38 #endif
  39
  40 /**********************************************************************
  41  * register summary
  42  **********************************************************************/
  43 #define RTC_SECONDS             0
  44 #define RTC_SECONDS_ALARM       1
  45 #define RTC_MINUTES             2
  46 #define RTC_MINUTES_ALARM       3
  47 #define RTC_HOURS               4
  48 #define RTC_HOURS_ALARM         5
  49 /* RTC_*_alarm is always true if 2 MSBs are set */
  50 # define RTC_ALARM_DONT_CARE    0xC0
  51
  52 #define RTC_DAY_OF_WEEK         6
  53 #define RTC_DAY_OF_MONTH        7
  54 #define RTC_MONTH               8
  55 #define RTC_YEAR                9
  56
  57 /* control registers - Moto names
  58  */
  59 #define RTC_REG_A               10
  60 #define RTC_REG_B               11
  61 #define RTC_REG_C               12
  62 #define RTC_REG_D               13
  63
  64 /**********************************************************************
  65  * register details
  66  **********************************************************************/
  67 #define RTC_FREQ_SELECT RTC_REG_A
  68
  69 /* update-in-progress  - set to "1" 244 microsecs before RTC goes off the bus,
  70  * reset after update (may take 1.984ms @ 32768Hz RefClock) is complete,
  71  * totalling to a max high interval of 2.228 ms.
  72  */
  73 # define RTC_UIP                0x80
  74 # define RTC_DIV_CTL            0x70
  75    /* divider control: refclock values 4.194 / 1.049 MHz / 32.768 kHz */
  76 #  define RTC_REF_CLCK_4MHZ     0x00
  77 #  define RTC_REF_CLCK_1MHZ     0x10
  78 #  define RTC_REF_CLCK_32KHZ    0x20
  79    /* 2 values for divider stage reset, others for "testing purposes only" */
  80 #  define RTC_DIV_RESET1        0x60
  81 #  define RTC_DIV_RESET2        0x70
  82   /* Periodic intr. / Square wave rate select. 0=none, 1=32.8kHz,... 15=2Hz */
  83 # define RTC_RATE_SELECT        0x0F
  84
  85 /**********************************************************************/
  86 #define RTC_CONTROL     RTC_REG_B
  87 # define RTC_SET 0x80           /* disable updates for clock setting */
  88 # define RTC_PIE 0x40           /* periodic interrupt enable */
  89 # define RTC_AIE 0x20           /* alarm interrupt enable */
  90 # define RTC_UIE 0x10           /* update-finished interrupt enable */
  91 # define RTC_SQWE 0x08          /* enable square-wave output */
  92 # define RTC_DM_BINARY 0x04     /* all time/date values are BCD if clear */
  93 # define RTC_24H 0x02           /* 24 hour mode - else hours bit 7 means pm */
  94 # define RTC_DST_EN 0x01        /* auto switch DST - works f. USA only */
  95
  96 /**********************************************************************/
  97 #define RTC_INTR_FLAGS  RTC_REG_C
  98 /* caution - cleared by read */
  99 # define RTC_IRQF 0x80          /* any of the following 3 is active */
 100 # define RTC_PF 0x40
 101 # define RTC_AF 0x20
 102 # define RTC_UF 0x10
 103
 104 /**********************************************************************/
 105 #define RTC_VALID       RTC_REG_D
 106 # define RTC_VRT 0x80           /* valid RAM and time */
 107 /**********************************************************************/
 108
 109 #ifndef ARCH_RTC_LOCATION       /* Override by <asm/mc146818rtc.h>? */
 110
 111 #define RTC_IO_EXTENT   0x8
 112 #define RTC_IO_EXTENT_USED      0x2
 113 #define RTC_IOMAPPED    1       /* Default to I/O mapping. */
 114
 115 #else
 116 #define RTC_IO_EXTENT_USED      RTC_IO_EXTENT
 117 #endif /* ARCH_RTC_LOCATION */
 118
 119 #endif /* _MC146818RTC_H */