drivers/message/fusion/mptbase.h

   1 /*
   2  *  linux/drivers/message/fusion/mptbase.h
   3  *      High performance SCSI + LAN / Fibre Channel device drivers.
   4  *      For use with PCI chip/adapter(s):
   5  *          LSIFC9xx/LSI409xx Fibre Channel
   6  *      running LSI Fusion MPT (Message Passing Technology) firmware.
   7  *
   8  *  Copyright (c) 1999-2007 LSI Corporation
   9  *  (mailto:DL-MPTFusionLinux@lsi.com)
  10  *
  11  */
  12 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
  13 /*
  14     This program is free software; you can redistribute it and/or modify
  15     it under the terms of the GNU General Public License as published by
  16     the Free Software Foundation; version 2 of the License.
  17
  18     This program is distributed in the hope that it will be useful,
  19     but WITHOUT ANY WARRANTY; without even the implied warranty of
  20     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  21     GNU General Public License for more details.
  22
  23     NO WARRANTY
  24     THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR
  25     CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT
  26     LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT,
  27     MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is
  28     solely responsible for determining the appropriateness of using and
  29     distributing the Program and assumes all risks associated with its
  30     exercise of rights under this Agreement, including but not limited to
  31     the risks and costs of program errors, damage to or loss of data,
  32     programs or equipment, and unavailability or interruption of operations.
  33
  34     DISCLAIMER OF LIABILITY
  35     NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY
  36     DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
  37     DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND
  38     ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
  39     TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
  40     USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED
  41     HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES
  42
  43     You should have received a copy of the GNU General Public License
  44     along with this program; if not, write to the Free Software
  45     Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  46 */
  47
  48 #ifndef MPTBASE_H_INCLUDED
  49 #define MPTBASE_H_INCLUDED
  50 /*{-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
  51
  52 #include <linux/kernel.h>
  53 #include <linux/pci.h>
  54 #include <linux/mutex.h>
  55
  56 #include "lsi/mpi_type.h"
  57 #include "lsi/mpi.h"            /* Fusion MPI(nterface) basic defs */
  58 #include "lsi/mpi_ioc.h"        /* Fusion MPT IOC(ontroller) defs */
  59 #include "lsi/mpi_cnfg.h"       /* IOC configuration support */
  60 #include "lsi/mpi_init.h"       /* SCSI Host (initiator) protocol support */
  61 #include "lsi/mpi_lan.h"        /* LAN over FC protocol support */
  62 #include "lsi/mpi_raid.h"       /* Integrated Mirroring support */
  63
  64 #include "lsi/mpi_fc.h"         /* Fibre Channel (lowlevel) support */
  65 #include "lsi/mpi_targ.h"       /* SCSI/FCP Target protcol support */
  66 #include "lsi/mpi_tool.h"       /* Tools support */
  67 #include "lsi/mpi_sas.h"        /* SAS support */
  68
  69 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
  70
  71 #ifndef MODULEAUTHOR
  72 #define MODULEAUTHOR    "LSI Corporation"
  73 #endif
  74
  75 #ifndef COPYRIGHT
  76 #define COPYRIGHT       "Copyright (c) 1999-2007 " MODULEAUTHOR
  77 #endif
  78
  79 #define MPT_LINUX_VERSION_COMMON        "3.04.06"
  80 #define MPT_LINUX_PACKAGE_NAME          "@(#)mptlinux-3.04.06"
  81 #define WHAT_MAGIC_STRING               "@" "(" "#" ")"
  82
  83 #define show_mptmod_ver(s,ver)  \
  84         printk(KERN_INFO "%s %s\n", s, ver);
  85
  86 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
  87 /*
  88  *  Fusion MPT(linux) driver configurable stuff...
  89  */
  90 #define MPT_MAX_ADAPTERS                18
  91 #define MPT_MAX_PROTOCOL_DRIVERS        16
  92 #define MPT_MAX_BUS                     1       /* Do not change */
  93 #define MPT_MAX_FC_DEVICES              255
  94 #define MPT_MAX_SCSI_DEVICES            16
  95 #define MPT_LAST_LUN                    255
  96 #define MPT_SENSE_BUFFER_ALLOC          64
  97         /* allow for 256 max sense alloc, but only 255 max request */
  98 #if MPT_SENSE_BUFFER_ALLOC >= 256
  99 #       undef MPT_SENSE_BUFFER_ALLOC
 100 #       define MPT_SENSE_BUFFER_ALLOC   256
 101 #       define MPT_SENSE_BUFFER_SIZE    255
 102 #else
 103 #       define MPT_SENSE_BUFFER_SIZE    MPT_SENSE_BUFFER_ALLOC
 104 #endif
 105
 106 #define MPT_NAME_LENGTH                 32
 107
 108 #define MPT_PROCFS_MPTBASEDIR           "mpt"
 109                                                 /* chg it to "driver/fusion" ? */
 110 #define MPT_PROCFS_SUMMARY_ALL_NODE             MPT_PROCFS_MPTBASEDIR "/summary"
 111 #define MPT_PROCFS_SUMMARY_ALL_PATHNAME         "/proc/" MPT_PROCFS_SUMMARY_ALL_NODE
 112 #define MPT_FW_REV_MAGIC_ID_STRING              "FwRev="
 113
 114 #define  MPT_MAX_REQ_DEPTH              1023
 115 #define  MPT_DEFAULT_REQ_DEPTH          256
 116 #define  MPT_MIN_REQ_DEPTH              128
 117
 118 #define  MPT_MAX_REPLY_DEPTH            MPT_MAX_REQ_DEPTH
 119 #define  MPT_DEFAULT_REPLY_DEPTH        128
 120 #define  MPT_MIN_REPLY_DEPTH            8
 121 #define  MPT_MAX_REPLIES_PER_ISR        32
 122
 123 #define  MPT_MAX_FRAME_SIZE             128
 124 #define  MPT_DEFAULT_FRAME_SIZE         128
 125
 126 #define  MPT_REPLY_FRAME_SIZE           0x50  /* Must be a multiple of 8 */
 127
 128 #define  MPT_SG_REQ_128_SCALE           1
 129 #define  MPT_SG_REQ_96_SCALE            2
 130 #define  MPT_SG_REQ_64_SCALE            4
 131
 132 #define  CAN_SLEEP                      1
 133 #define  NO_SLEEP                       0
 134
 135 #define MPT_COALESCING_TIMEOUT          0x10
 136
 137 /*
 138  * SCSI transfer rate defines.
 139  */
 140 #define MPT_ULTRA320                    0x08
 141 #define MPT_ULTRA160                    0x09
 142 #define MPT_ULTRA2                      0x0A
 143 #define MPT_ULTRA                       0x0C
 144 #define MPT_FAST                        0x19
 145 #define MPT_SCSI                        0x32
 146 #define MPT_ASYNC                       0xFF
 147
 148 #define MPT_NARROW                      0
 149 #define MPT_WIDE                        1
 150
 151 #define C0_1030                         0x08
 152 #define XL_929                          0x01
 153
 154
 155 /*
 156  *      Try to keep these at 2^N-1
 157  */
 158 #define MPT_FC_CAN_QUEUE        127
 159 #define MPT_SCSI_CAN_QUEUE      127
 160
 161 /*
 162  * Set the MAX_SGE value based on user input.
 163  */
 164 #ifdef  CONFIG_FUSION_MAX_SGE
 165 #if     CONFIG_FUSION_MAX_SGE  < 16
 166 #define MPT_SCSI_SG_DEPTH       16
 167 #elif   CONFIG_FUSION_MAX_SGE  > 128
 168 #define MPT_SCSI_SG_DEPTH       128
 169 #else
 170 #define MPT_SCSI_SG_DEPTH       CONFIG_FUSION_MAX_SGE
 171 #endif
 172 #else
 173 #define MPT_SCSI_SG_DEPTH       40
 174 #endif
 175
 176 /* debug print string length used for events and iocstatus */
 177 # define EVENT_DESCR_STR_SZ             100
 178
 179 #ifdef __KERNEL__       /* { */
 180 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
 181
 182 #include <linux/proc_fs.h>
 183
 184 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
 185 /*
 186  * Attempt semi-consistent error & warning msgs across
 187  * MPT drivers.  NOTE: Users of these macro defs must
 188  * themselves define their own MYNAM.
 189  */
 190 #define MYIOC_s_FMT                     MYNAM ": %s: "
 191 #define MYIOC_s_DEBUG_FMT               KERN_DEBUG MYNAM ": %s: "
 192 #define MYIOC_s_INFO_FMT                KERN_INFO MYNAM ": %s: "
 193 #define MYIOC_s_NOTE_FMT                KERN_NOTICE MYNAM ": %s: "
 194 #define MYIOC_s_WARN_FMT                KERN_WARNING MYNAM ": %s: WARNING - "
 195 #define MYIOC_s_ERR_FMT                 KERN_ERR MYNAM ": %s: ERROR - "
 196
 197 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
 198 /*
 199  *  ATTO UL4D associated structures and defines
 200  */
 201 #define ATTOFLAG_DISC     0x0001
 202 #define ATTOFLAG_TAGGED   0x0002
 203 #define ATTOFLAG_WIDE_ENB 0x0008
 204 #define ATTOFLAG_ID_ENB   0x0010
 205 #define ATTOFLAG_LUN_ENB  0x0060
 206
 207 typedef struct _ATTO_DEVICE_INFO
 208 {
 209         u8      Offset;                                 /* 00h */
 210         u8      Period;                                 /* 01h */
 211         u16     ATTOFlags;                              /* 02h */
 212 } ATTO_DEVICE_INFO, MPI_POINTER PTR_ATTO_DEVICE_INFO,
 213   ATTODeviceInfo_t, MPI_POINTER pATTODeviceInfo_t;
 214
 215 typedef struct _ATTO_CONFIG_PAGE_SCSI_PORT_2
 216 {
 217         CONFIG_PAGE_HEADER      Header;                 /* 00h */
 218         u16                     PortFlags;              /* 04h */
 219         u16                     Unused1;                /* 06h */
 220         u32                     Unused2;                /* 08h */
 221         ATTO_DEVICE_INFO        DeviceSettings[16];     /* 0Ch */
 222 } fATTO_CONFIG_PAGE_SCSI_PORT_2, MPI_POINTER PTR_ATTO_CONFIG_PAGE_SCSI_PORT_2,
 223   ATTO_SCSIPortPage2_t, MPI_POINTER pATTO_SCSIPortPage2_t;
 224
 225
 226 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
 227 /*
 228  *  MPT protocol driver defs...
 229  */
 230 typedef enum {
 231         MPTBASE_DRIVER,         /* MPT base class */
 232         MPTCTL_DRIVER,          /* MPT ioctl class */
 233         MPTSPI_DRIVER,          /* MPT SPI host class */
 234         MPTFC_DRIVER,           /* MPT FC host class */
 235         MPTSAS_DRIVER,          /* MPT SAS host class */
 236         MPTLAN_DRIVER,          /* MPT LAN class */
 237         MPTSTM_DRIVER,          /* MPT SCSI target mode class */
 238         MPTUNKNOWN_DRIVER
 239 } MPT_DRIVER_CLASS;
 240
 241 struct mpt_pci_driver{
 242         int  (*probe) (struct pci_dev *dev, const struct pci_device_id *id);
 243         void (*remove) (struct pci_dev *dev);
 244 };
 245
 246 /*
 247  *  MPT adapter / port / bus / device info structures...
 248  */
 249
 250 typedef union _MPT_FRAME_TRACKER {
 251         struct {
 252                 struct list_head        list;
 253                 u32                      arg1;
 254                 u32                      pad;
 255                 void                    *argp1;
 256         } linkage;
 257         /*
 258          * NOTE: When request frames are free, on the linkage structure
 259          * contets are valid.  All other values are invalid.
 260          * In particular, do NOT reply on offset [2]
 261          * (in words) being the * message context.
 262          * The message context must be reset (computed via base address
 263          * + an offset) prior to issuing any command.
 264          *
 265          * NOTE2: On non-32-bit systems, where pointers are LARGE,
 266          * using the linkage pointers destroys our sacred MsgContext
 267          * field contents.  But we don't care anymore because these
 268          * are now reset in mpt_put_msg_frame() just prior to sending
 269          * a request off to the IOC.
 270          */
 271         struct {
 272                 u32 __hdr[2];
 273                 /*
 274                  * The following _MUST_ match the location of the
 275                  * MsgContext field in the MPT message headers.
 276                  */
 277                 union {
 278                         u32              MsgContext;
 279                         struct {
 280                                 u16      req_idx;       /* Request index */
 281                                 u8       cb_idx;        /* callback function index */
 282                                 u8       rsvd;
 283                         } fld;
 284                 } msgctxu;
 285         } hwhdr;
 286         /*
 287          * Remark: 32 bit identifier:
 288          *  31-24: reserved
 289          *  23-16: call back index
 290          *  15-0 : request index
 291          */
 292 } MPT_FRAME_TRACKER;
 293
 294 /*
 295  *  We might want to view/access a frame as:
 296  *    1) generic request header
 297  *    2) SCSIIORequest
 298  *    3) SCSIIOReply
 299  *    4) MPIDefaultReply
 300  *    5) frame tracker
 301  */
 302 typedef struct _MPT_FRAME_HDR {
 303         union {
 304                 MPIHeader_t             hdr;
 305                 SCSIIORequest_t         scsireq;
 306                 SCSIIOReply_t           sreply;
 307                 ConfigReply_t           configreply;
 308                 MPIDefaultReply_t       reply;
 309                 MPT_FRAME_TRACKER       frame;
 310         } u;
 311 } MPT_FRAME_HDR;
 312
 313 #define MPT_REQ_MSGFLAGS_DROPME         0x80
 314
 315 typedef struct _MPT_SGL_HDR {
 316         SGESimple32_t    sge[1];
 317 } MPT_SGL_HDR;
 318
 319 typedef struct _MPT_SGL64_HDR {
 320         SGESimple64_t    sge[1];
 321 } MPT_SGL64_HDR;
 322
 323 /*
 324  *  System interface register set
 325  */
 326
 327 typedef struct _SYSIF_REGS
 328 {
 329         u32     Doorbell;       /* 00     System<->IOC Doorbell reg  */
 330         u32     WriteSequence;  /* 04     Write Sequence register    */
 331         u32     Diagnostic;     /* 08     Diagnostic register        */
 332         u32     TestBase;       /* 0C     Test Base Address          */
 333         u32     DiagRwData;     /* 10     Read Write Data (fw download)   */
 334         u32     DiagRwAddress;  /* 14     Read Write Address (fw download)*/
 335         u32     Reserved1[6];   /* 18-2F  reserved for future use    */
 336         u32     IntStatus;      /* 30     Interrupt Status           */
 337         u32     IntMask;        /* 34     Interrupt Mask             */
 338         u32     Reserved2[2];   /* 38-3F  reserved for future use    */
 339         u32     RequestFifo;    /* 40     Request Post/Free FIFO     */
 340         u32     ReplyFifo;      /* 44     Reply   Post/Free FIFO     */
 341         u32     RequestHiPriFifo; /* 48   Hi Priority Request FIFO   */
 342         u32     Reserved3;      /* 4C-4F  reserved for future use    */
 343         u32     HostIndex;      /* 50     Host Index register        */
 344         u32     Reserved4[15];  /* 54-8F                             */
 345         u32     Fubar;          /* 90     For Fubar usage            */
 346         u32     Reserved5[1050];/* 94-10F8                           */
 347         u32     Reset_1078;     /* 10FC   Reset 1078                 */
 348 } SYSIF_REGS;
 349
 350 /*
 351  * NOTE: Use MPI_{DOORBELL,WRITESEQ,DIAG}_xxx defs in lsi/mpi.h
 352  * in conjunction with SYSIF_REGS accesses!
 353  */
 354
 355
 356 /*
 357  *      Dynamic Multi-Pathing specific stuff...
 358  */
 359
 360 /* VirtTarget negoFlags field */
 361 #define MPT_TARGET_NO_NEGO_WIDE         0x01
 362 #define MPT_TARGET_NO_NEGO_SYNC         0x02
 363 #define MPT_TARGET_NO_NEGO_QAS          0x04
 364 #define MPT_TAPE_NEGO_IDP               0x08
 365
 366 /*
 367  *      VirtDevice - FC LUN device or SCSI target device
 368  */
 369 typedef struct _VirtTarget {
 370         struct scsi_target      *starget;
 371         u8                       tflags;
 372         u8                       ioc_id;
 373         u8                       id;
 374         u8                       channel;
 375         u8                       minSyncFactor; /* 0xFF is async */
 376         u8                       maxOffset;     /* 0 if async */
 377         u8                       maxWidth;      /* 0 if narrow, 1 if wide */
 378         u8                       negoFlags;     /* bit field, see above */
 379         u8                       raidVolume;    /* set, if RAID Volume */
 380         u8                       type;          /* byte 0 of Inquiry data */
 381         u8                       deleted;       /* target in process of being removed */
 382         u32                      num_luns;
 383 } VirtTarget;
 384
 385 typedef struct _VirtDevice {
 386         VirtTarget              *vtarget;
 387         u8                       configured_lun;
 388         int                      lun;
 389 } VirtDevice;
 390
 391 /*
 392  *  Fibre Channel (SCSI) target device and associated defines...
 393  */
 394 #define MPT_TARGET_DEFAULT_DV_STATUS    0x00
 395 #define MPT_TARGET_FLAGS_VALID_NEGO     0x01
 396 #define MPT_TARGET_FLAGS_VALID_INQUIRY  0x02
 397 #define MPT_TARGET_FLAGS_Q_YES          0x08
 398 #define MPT_TARGET_FLAGS_VALID_56       0x10
 399 #define MPT_TARGET_FLAGS_SAF_TE_ISSUED  0x20
 400 #define MPT_TARGET_FLAGS_RAID_COMPONENT 0x40
 401 #define MPT_TARGET_FLAGS_LED_ON         0x80
 402
 403 /*
 404  *      /proc/mpt interface
 405  */
 406 typedef struct {
 407         const char      *name;
 408         mode_t           mode;
 409         int              pad;
 410         read_proc_t     *read_proc;
 411         write_proc_t    *write_proc;
 412 } mpt_proc_entry_t;
 413
 414 #define MPT_PROC_READ_RETURN(buf,start,offset,request,eof,len) \
 415 do { \
 416         len -= offset;                  \
 417         if (len < request) {            \
 418                 *eof = 1;               \
 419                 if (len <= 0)           \
 420                         return 0;       \
 421         } else                          \
 422                 len = request;          \
 423         *start = buf + offset;          \
 424         return len;                     \
 425 } while (0)
 426
 427
 428 /*
 429  *      IOCTL structure and associated defines
 430  */
 431
 432 #define MPT_IOCTL_STATUS_DID_IOCRESET   0x01    /* IOC Reset occurred on the current*/
 433 #define MPT_IOCTL_STATUS_RF_VALID       0x02    /* The Reply Frame is VALID */
 434 #define MPT_IOCTL_STATUS_TIMER_ACTIVE   0x04    /* The timer is running */
 435 #define MPT_IOCTL_STATUS_SENSE_VALID    0x08    /* Sense data is valid */
 436 #define MPT_IOCTL_STATUS_COMMAND_GOOD   0x10    /* Command Status GOOD */
 437 #define MPT_IOCTL_STATUS_TMTIMER_ACTIVE 0x20    /* The TM timer is running */
 438 #define MPT_IOCTL_STATUS_TM_FAILED      0x40    /* User TM request failed */
 439
 440 #define MPTCTL_RESET_OK                 0x01    /* Issue Bus Reset */
 441
 442 typedef struct _MPT_IOCTL {
 443         struct _MPT_ADAPTER     *ioc;
 444         u8                       ReplyFrame[MPT_DEFAULT_FRAME_SIZE];    /* reply frame data */
 445         u8                       sense[MPT_SENSE_BUFFER_ALLOC];
 446         int                      wait_done;     /* wake-up value for this ioc */
 447         u8                       rsvd;
 448         u8                       status;        /* current command status */
 449         u8                       reset;         /* 1 if bus reset allowed */
 450         u8                       id;            /* target for reset */
 451         struct mutex             ioctl_mutex;
 452 } MPT_IOCTL;
 453
 454 #define MPT_SAS_MGMT_STATUS_RF_VALID    0x02    /* The Reply Frame is VALID */
 455 #define MPT_SAS_MGMT_STATUS_COMMAND_GOOD        0x10    /* Command Status GOOD */
 456 #define MPT_SAS_MGMT_STATUS_TM_FAILED   0x40    /* User TM request failed */
 457
 458 typedef struct _MPT_SAS_MGMT {
 459         struct mutex             mutex;
 460         struct completion        done;
 461         u8                       reply[MPT_DEFAULT_FRAME_SIZE]; /* reply frame data */
 462         u8                       status;        /* current command status */
 463 }MPT_SAS_MGMT;
 464
 465 /*
 466  *  Event Structure and define
 467  */
 468 #define MPTCTL_EVENT_LOG_SIZE           (0x000000032)
 469 typedef struct _mpt_ioctl_events {
 470         u32     event;          /* Specified by define above */
 471         u32     eventContext;   /* Index or counter */
 472         u32     data[2];        /* First 8 bytes of Event Data */
 473 } MPT_IOCTL_EVENTS;
 474
 475 /*
 476  * CONFIGPARM status  defines
 477  */
 478 #define MPT_CONFIG_GOOD         MPI_IOCSTATUS_SUCCESS
 479 #define MPT_CONFIG_ERROR        0x002F
 480
 481 /*
 482  *      Substructure to store SCSI specific configuration page data
 483  */
 484                                                 /* dvStatus defines: */
 485 #define MPT_SCSICFG_USE_NVRAM           0x01    /* WriteSDP1 using NVRAM */
 486 #define MPT_SCSICFG_ALL_IDS             0x02    /* WriteSDP1 to all IDS */
 487 /* #define MPT_SCSICFG_BLK_NEGO         0x10       WriteSDP1 with WDTR and SDTR disabled */
 488
 489 typedef struct _SpiCfgData {
 490         u32              PortFlags;
 491         int             *nvram;                 /* table of device NVRAM values */
 492         IOCPage4_t      *pIocPg4;               /* SEP devices addressing */
 493         dma_addr_t       IocPg4_dma;            /* Phys Addr of IOCPage4 data */
 494         int              IocPg4Sz;              /* IOCPage4 size */
 495         u8               minSyncFactor;         /* 0xFF if async */
 496         u8               maxSyncOffset;         /* 0 if async */
 497         u8               maxBusWidth;           /* 0 if narrow, 1 if wide */
 498         u8               busType;               /* SE, LVD, HD */
 499         u8               sdp1version;           /* SDP1 version */
 500         u8               sdp1length;            /* SDP1 length  */
 501         u8               sdp0version;           /* SDP0 version */
 502         u8               sdp0length;            /* SDP0 length  */
 503         u8               dvScheduled;           /* 1 if scheduled */
 504         u8               noQas;                 /* Disable QAS for this adapter */
 505         u8               Saf_Te;                /* 1 to force all Processors as
 506                                                  * SAF-TE if Inquiry data length
 507                                                  * is too short to check for SAF-TE
 508                                                  */
 509         u8               bus_reset;             /* 1 to allow bus reset */
 510         u8               rsvd[1];
 511 }SpiCfgData;
 512
 513 typedef struct _SasCfgData {
 514         u8               ptClear;               /* 1 to automatically clear the
 515                                                  * persistent table.
 516                                                  * 0 to disable
 517                                                  * automatic clearing.
 518                                                  */
 519 }SasCfgData;
 520
 521 /*
 522  * Inactive volume link list of raid component data
 523  * @inactive_list
 524  */
 525 struct inactive_raid_component_info {
 526         struct   list_head list;
 527         u8               volumeID;              /* volume target id */
 528         u8               volumeBus;             /* volume channel */
 529         IOC_3_PHYS_DISK  d;                     /* phys disk info */
 530 };
 531
 532 typedef struct _RaidCfgData {
 533         IOCPage2_t      *pIocPg2;               /* table of Raid Volumes */
 534         IOCPage3_t      *pIocPg3;               /* table of physical disks */
 535         struct mutex    inactive_list_mutex;
 536         struct list_head        inactive_list; /* link list for physical
 537                                                 disk that belong in
 538                                                 inactive volumes */
 539 }RaidCfgData;
 540
 541 typedef struct _FcCfgData {
 542         /* will ultimately hold fc_port_page0 also */
 543         struct {
 544                 FCPortPage1_t   *data;
 545                 dma_addr_t       dma;
 546                 int              pg_sz;
 547         }                        fc_port_page1[2];
 548 } FcCfgData;
 549
 550 #define MPT_RPORT_INFO_FLAGS_REGISTERED 0x01    /* rport registered */
 551 #define MPT_RPORT_INFO_FLAGS_MISSING    0x02    /* missing from DevPage0 scan */
 552
 553 /*
 554  * data allocated for each fc rport device
 555  */
 556 struct mptfc_rport_info
 557 {
 558         struct list_head list;
 559         struct fc_rport *rport;
 560         struct scsi_target *starget;
 561         FCDevicePage0_t pg0;
 562         u8              flags;
 563 };
 564
 565 /*
 566  *  Adapter Structure - pci_dev specific. Maximum: MPT_MAX_ADAPTERS
 567  */
 568 typedef struct _MPT_ADAPTER
 569 {
 570         int                      id;            /* Unique adapter id N {0,1,2,...} */
 571         int                      pci_irq;       /* This irq           */
 572         char                     name[MPT_NAME_LENGTH]; /* "iocN"             */
 573         char                     prod_name[MPT_NAME_LENGTH];    /* "LSIFC9x9"         */
 574         char                     board_name[16];
 575         char                     board_assembly[16];
 576         char                     board_tracer[16];
 577         u16                      nvdata_version_persistent;
 578         u16                      nvdata_version_default;
 579         int                      debug_level;
 580         u8                       io_missing_delay;
 581         u8                       device_missing_delay;
 582         SYSIF_REGS __iomem      *chip;          /* == c8817000 (mmap) */
 583         SYSIF_REGS __iomem      *pio_chip;      /* Programmed IO (downloadboot) */
 584         u8                       bus_type;
 585         u32                      mem_phys;      /* == f4020000 (mmap) */
 586         u32                      pio_mem_phys;  /* Programmed IO (downloadboot) */
 587         int                      mem_size;      /* mmap memory size */
 588         int                      number_of_buses;
 589         int                      devices_per_bus;
 590         int                      alloc_total;
 591         u32                      last_state;
 592         int                      active;
 593         u8                      *alloc;         /* frames alloc ptr */
 594         dma_addr_t               alloc_dma;
 595         u32                      alloc_sz;
 596         MPT_FRAME_HDR           *reply_frames;  /* Reply msg frames - rounded up! */
 597         u32                      reply_frames_low_dma;
 598         int                      reply_depth;   /* Num Allocated reply frames */
 599         int                      reply_sz;      /* Reply frame size */
 600         int                      num_chain;     /* Number of chain buffers */
 601                 /* Pool of buffers for chaining. ReqToChain
 602                  * and ChainToChain track index of chain buffers.
 603                  * ChainBuffer (DMA) virt/phys addresses.
 604                  * FreeChainQ (lock) locking mechanisms.
 605                  */
 606         int                     *ReqToChain;
 607         int                     *RequestNB;
 608         int                     *ChainToChain;
 609         u8                      *ChainBuffer;
 610         dma_addr_t               ChainBufferDMA;
 611         struct list_head         FreeChainQ;
 612         spinlock_t               FreeChainQlock;
 613                 /* We (host driver) get to manage our own RequestQueue! */
 614         dma_addr_t               req_frames_dma;
 615         MPT_FRAME_HDR           *req_frames;    /* Request msg frames - rounded up! */
 616         u32                      req_frames_low_dma;
 617         int                      req_depth;     /* Number of request frames */
 618         int                      req_sz;        /* Request frame size (bytes) */
 619         spinlock_t               FreeQlock;
 620         struct list_head         FreeQ;
 621                 /* Pool of SCSI sense buffers for commands coming from
 622                  * the SCSI mid-layer.  We have one 256 byte sense buffer
 623                  * for each REQ entry.
 624                  */
 625         u8                      *sense_buf_pool;
 626         dma_addr_t               sense_buf_pool_dma;
 627         u32                      sense_buf_low_dma;
 628         u8                      *HostPageBuffer; /* SAS - host page buffer support */
 629         u32                     HostPageBuffer_sz;
 630         dma_addr_t              HostPageBuffer_dma;
 631         int                      mtrr_reg;
 632         struct pci_dev          *pcidev;        /* struct pci_dev pointer */
 633         int                     bars;           /* bitmask of BAR's that must be configured */
 634         int                     msi_enable;
 635         u8                      __iomem *memmap;        /* mmap address */
 636         struct Scsi_Host        *sh;            /* Scsi Host pointer */
 637         SpiCfgData              spi_data;       /* Scsi config. data */
 638         RaidCfgData             raid_data;      /* Raid config. data */
 639         SasCfgData              sas_data;       /* Sas config. data */
 640         FcCfgData               fc_data;        /* Fc config. data */
 641         MPT_IOCTL               *ioctl;         /* ioctl data pointer */
 642         struct proc_dir_entry   *ioc_dentry;
 643         struct _MPT_ADAPTER     *alt_ioc;       /* ptr to 929 bound adapter port */
 644         spinlock_t               diagLock;      /* diagnostic reset lock */
 645         int                      diagPending;
 646         u32                      biosVersion;   /* BIOS version from IO Unit Page 2 */
 647         int                      eventTypes;    /* Event logging parameters */
 648         int                      eventContext;  /* Next event context */
 649         int                      eventLogSize;  /* Max number of cached events */
 650         struct _mpt_ioctl_events *events;       /* pointer to event log */
 651         u8                      *cached_fw;     /* Pointer to FW */
 652         dma_addr_t              cached_fw_dma;
 653         struct list_head         configQ;       /* linked list of config. requests */
 654         int                      hs_reply_idx;
 655 #ifndef MFCNT
 656         u32                      pad0;
 657 #else
 658         u32                      mfcnt;
 659 #endif
 660         u32                      NB_for_64_byte_frame;
 661         u32                      hs_req[MPT_MAX_FRAME_SIZE/sizeof(u32)];
 662         u16                      hs_reply[MPT_MAX_FRAME_SIZE/sizeof(u16)];
 663         IOCFactsReply_t          facts;
 664         PortFactsReply_t         pfacts[2];
 665         FCPortPage0_t            fc_port_page0[2];
 666         struct timer_list        persist_timer; /* persist table timer */
 667         int                      persist_wait_done; /* persist completion flag */
 668         u8                       persist_reply_frame[MPT_DEFAULT_FRAME_SIZE]; /* persist reply */
 669         LANPage0_t               lan_cnfg_page0;
 670         LANPage1_t               lan_cnfg_page1;
 671
 672         u8                       ir_firmware; /* =1 if IR firmware detected */
 673         /*
 674          * Description: errata_flag_1064
 675          * If a PCIX read occurs within 1 or 2 cycles after the chip receives
 676          * a split completion for a read data, an internal address pointer incorrectly
 677          * increments by 32 bytes
 678          */
 679         int                      errata_flag_1064;
 680         int                      aen_event_read_flag; /* flag to indicate event log was read*/
 681         u8                       FirstWhoInit;
 682         u8                       upload_fw;     /* If set, do a fw upload */
 683         u8                       reload_fw;     /* Force a FW Reload on next reset */
 684         u8                       NBShiftFactor;  /* NB Shift Factor based on Block Size (Facts)  */
 685         u8                       pad1[4];
 686         u8                       DoneCtx;
 687         u8                       TaskCtx;
 688         u8                       InternalCtx;
 689         spinlock_t               initializing_hba_lock;
 690         int                      initializing_hba_lock_flag;
 691         struct list_head         list;
 692         struct net_device       *netdev;
 693         struct list_head         sas_topology;
 694         struct mutex             sas_topology_mutex;
 695         struct mutex             sas_discovery_mutex;
 696         u8                       sas_discovery_runtime;
 697         u8                       sas_discovery_ignore_events;
 698         int                      sas_index; /* index refrencing */
 699         MPT_SAS_MGMT             sas_mgmt;
 700         struct work_struct       sas_persist_task;
 701
 702         struct work_struct       fc_setup_reset_work;
 703         struct list_head         fc_rports;
 704         struct work_struct       fc_lsc_work;
 705         u8                       fc_link_speed[2];
 706         spinlock_t               fc_rescan_work_lock;
 707         struct work_struct       fc_rescan_work;
 708         char                     fc_rescan_work_q_name[KOBJ_NAME_LEN];
 709         struct workqueue_struct *fc_rescan_work_q;
 710         struct scsi_cmnd        **ScsiLookup;
 711         spinlock_t                scsi_lookup_lock;
 712 } MPT_ADAPTER;
 713
 714 /*
 715  *  New return value convention:
 716  *    1 = Ok to free associated request frame
 717  *    0 = not Ok ...
 718  */
 719 typedef int (*MPT_CALLBACK)(MPT_ADAPTER *ioc, MPT_FRAME_HDR *req, MPT_FRAME_HDR *reply);
 720 typedef int (*MPT_EVHANDLER)(MPT_ADAPTER *ioc, EventNotificationReply_t *evReply);
 721 typedef int (*MPT_RESETHANDLER)(MPT_ADAPTER *ioc, int reset_phase);
 722 /* reset_phase defs */
 723 #define MPT_IOC_PRE_RESET               0
 724 #define MPT_IOC_POST_RESET              1
 725 #define MPT_IOC_SETUP_RESET             2
 726
 727 /*
 728  * Invent MPT host event (super-set of MPI Events)
 729  * Fitted to 1030's 64-byte [max] request frame size
 730  */
 731 typedef struct _MPT_HOST_EVENT {
 732         EventNotificationReply_t         MpiEvent;      /* 8 32-bit words! */
 733         u32                              pad[6];
 734         void                            *next;
 735 } MPT_HOST_EVENT;
 736
 737 #define MPT_HOSTEVENT_IOC_BRINGUP       0x91
 738 #define MPT_HOSTEVENT_IOC_RECOVER       0x92
 739
 740 /* Define the generic types based on the size
 741  * of the dma_addr_t type.
 742  */
 743 typedef struct _mpt_sge {
 744         u32             FlagsLength;
 745         dma_addr_t      Address;
 746 } MptSge_t;
 747
 748 #define mpt_addr_size() \
 749         ((sizeof(dma_addr_t) == sizeof(u64)) ? MPI_SGE_FLAGS_64_BIT_ADDRESSING : \
 750                 MPI_SGE_FLAGS_32_BIT_ADDRESSING)
 751
 752 #define mpt_msg_flags() \
 753         ((sizeof(dma_addr_t) == sizeof(u64)) ? MPI_SCSIIO_MSGFLGS_SENSE_WIDTH_64 : \
 754                 MPI_SCSIIO_MSGFLGS_SENSE_WIDTH_32)
 755
 756 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
 757 /*
 758  *  Funky (private) macros...
 759  */
 760 #include "mptdebug.h"
 761
 762 #define MPT_INDEX_2_MFPTR(ioc,idx) \
 763         (MPT_FRAME_HDR*)( (u8*)(ioc)->req_frames + (ioc)->req_sz * (idx) )
 764
 765 #define MFPTR_2_MPT_INDEX(ioc,mf) \
 766         (int)( ((u8*)mf - (u8*)(ioc)->req_frames) / (ioc)->req_sz )
 767
 768 #define MPT_INDEX_2_RFPTR(ioc,idx) \
 769         (MPT_FRAME_HDR*)( (u8*)(ioc)->reply_frames + (ioc)->req_sz * (idx) )
 770
 771 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
 772
 773 #define SCSI_STD_SENSE_BYTES    18
 774 #define SCSI_STD_INQUIRY_BYTES  36
 775 #define SCSI_MAX_INQUIRY_BYTES  96
 776
 777 /*
 778  * MPT_SCSI_HOST defines - Used by the IOCTL and the SCSI drivers
 779  * Private to the driver.
 780  */
 781 /* LOCAL structure and fields used when processing
 782  * internally generated commands. These include:
 783  * bus scan, dv and config requests.
 784  */
 785 typedef struct _MPT_LOCAL_REPLY {
 786         ConfigPageHeader_t header;
 787         int     completion;
 788         u8      sense[SCSI_STD_SENSE_BYTES];
 789         u8      scsiStatus;
 790         u8      skip;
 791         u32     pad;
 792 } MPT_LOCAL_REPLY;
 793
 794 #define MPT_HOST_BUS_UNKNOWN            (0xFF)
 795 #define MPT_HOST_TOO_MANY_TM            (0x05)
 796 #define MPT_HOST_NVRAM_INVALID          (0xFFFFFFFF)
 797 #define MPT_HOST_NO_CHAIN               (0xFFFFFFFF)
 798 #define MPT_NVRAM_MASK_TIMEOUT          (0x000000FF)
 799 #define MPT_NVRAM_SYNC_MASK             (0x0000FF00)
 800 #define MPT_NVRAM_SYNC_SHIFT            (8)
 801 #define MPT_NVRAM_DISCONNECT_ENABLE     (0x00010000)
 802 #define MPT_NVRAM_ID_SCAN_ENABLE        (0x00020000)
 803 #define MPT_NVRAM_LUN_SCAN_ENABLE       (0x00040000)
 804 #define MPT_NVRAM_TAG_QUEUE_ENABLE      (0x00080000)
 805 #define MPT_NVRAM_WIDE_DISABLE          (0x00100000)
 806 #define MPT_NVRAM_BOOT_CHOICE           (0x00200000)
 807
 808 /* The TM_STATE variable is used to provide strict single threading of TM
 809  * requests as well as communicate TM error conditions.
 810  */
 811 #define TM_STATE_NONE          (0)
 812 #define TM_STATE_IN_PROGRESS   (1)
 813 #define TM_STATE_ERROR         (2)
 814
 815 typedef enum {
 816         FC,
 817         SPI,
 818         SAS
 819 } BUS_TYPE;
 820
 821 typedef struct _MPT_SCSI_HOST {
 822         MPT_ADAPTER              *ioc;
 823         int                       port;
 824         u32                       pad0;
 825         MPT_LOCAL_REPLY          *pLocal;               /* used for internal commands */
 826         struct timer_list         timer;
 827                 /* Pool of memory for holding SCpnts before doing
 828                  * OS callbacks. freeQ is the free pool.
 829                  */
 830         u8                        tmPending;
 831         u8                        resetPending;
 832         u8                        negoNvram;            /* DV disabled, nego NVRAM */
 833         u8                        pad1;
 834         u8                        tmState;
 835         u8                        rsvd[2];
 836         MPT_FRAME_HDR            *cmdPtr;               /* Ptr to nonOS request */
 837         struct scsi_cmnd         *abortSCpnt;
 838         MPT_LOCAL_REPLY           localReply;           /* internal cmd reply struct */
 839         unsigned long             hard_resets;          /* driver forced bus resets count */
 840         unsigned long             soft_resets;          /* fw/external bus resets count */
 841         unsigned long             timeouts;             /* cmd timeouts */
 842         ushort                    sel_timeout[MPT_MAX_FC_DEVICES];
 843         char                      *info_kbuf;
 844         wait_queue_head_t         scandv_waitq;
 845         int                       scandv_wait_done;
 846         long                      last_queue_full;
 847         u16                       tm_iocstatus;
 848         u16                       spi_pending;
 849         struct list_head          target_reset_list;
 850 } MPT_SCSI_HOST;
 851
 852 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
 853 /*
 854  *      More Dynamic Multi-Pathing stuff...
 855  */
 856
 857 /* Forward decl, a strange C thing, to prevent gcc compiler warnings */
 858 struct scsi_cmnd;
 859
 860 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
 861 /*
 862  * Generic structure passed to the base mpt_config function.
 863  */
 864 typedef struct _x_config_parms {
 865         struct list_head         linkage;       /* linked list */
 866         struct timer_list        timer;         /* timer function for this request  */
 867         union {
 868                 ConfigExtendedPageHeader_t      *ehdr;
 869                 ConfigPageHeader_t      *hdr;
 870         } cfghdr;
 871         dma_addr_t               physAddr;
 872         int                      wait_done;     /* wait for this request */
 873         u32                      pageAddr;      /* properly formatted */
 874         u8                       action;
 875         u8                       dir;
 876         u8                       timeout;       /* seconds */
 877         u8                       pad1;
 878         u16                      status;
 879         u16                      pad2;
 880 } CONFIGPARMS;
 881
 882 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
 883 /*
 884  *  Public entry points...
 885  */
 886 extern int       mpt_attach(struct pci_dev *pdev, const struct pci_device_id *id);
 887 extern void      mpt_detach(struct pci_dev *pdev);
 888 #ifdef CONFIG_PM
 889 extern int       mpt_suspend(struct pci_dev *pdev, pm_message_t state);
 890 extern int       mpt_resume(struct pci_dev *pdev);
 891 #endif
 892 extern u8        mpt_register(MPT_CALLBACK cbfunc, MPT_DRIVER_CLASS dclass);
 893 extern void      mpt_deregister(u8 cb_idx);
 894 extern int       mpt_event_register(u8 cb_idx, MPT_EVHANDLER ev_cbfunc);
 895 extern void      mpt_event_deregister(u8 cb_idx);
 896 extern int       mpt_reset_register(u8 cb_idx, MPT_RESETHANDLER reset_func);
 897 extern void      mpt_reset_deregister(u8 cb_idx);
 898 extern int       mpt_device_driver_register(struct mpt_pci_driver * dd_cbfunc, u8 cb_idx);
 899 extern void      mpt_device_driver_deregister(u8 cb_idx);
 900 extern MPT_FRAME_HDR    *mpt_get_msg_frame(u8 cb_idx, MPT_ADAPTER *ioc);
 901 extern void      mpt_free_msg_frame(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf);
 902 extern void      mpt_put_msg_frame(u8 cb_idx, MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf);
 903 extern void      mpt_put_msg_frame_hi_pri(u8 cb_idx, MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf);
 904 extern void      mpt_add_sge(char *pAddr, u32 flagslength, dma_addr_t dma_addr);
 905
 906 extern int       mpt_send_handshake_request(u8 cb_idx, MPT_ADAPTER *ioc, int reqBytes, u32 *req, int sleepFlag);
 907 extern int       mpt_verify_adapter(int iocid, MPT_ADAPTER **iocpp);
 908 extern u32       mpt_GetIocState(MPT_ADAPTER *ioc, int cooked);
 909 extern void      mpt_print_ioc_summary(MPT_ADAPTER *ioc, char *buf, int *size, int len, int showlan);
 910 extern int       mpt_HardResetHandler(MPT_ADAPTER *ioc, int sleepFlag);
 911 extern int       mpt_config(MPT_ADAPTER *ioc, CONFIGPARMS *cfg);
 912 extern int       mpt_alloc_fw_memory(MPT_ADAPTER *ioc, int size);
 913 extern void      mpt_free_fw_memory(MPT_ADAPTER *ioc);
 914 extern int       mpt_findImVolumes(MPT_ADAPTER *ioc);
 915 extern int       mptbase_sas_persist_operation(MPT_ADAPTER *ioc, u8 persist_opcode);
 916 extern int       mpt_raid_phys_disk_pg0(MPT_ADAPTER *ioc, u8 phys_disk_num, pRaidPhysDiskPage0_t phys_disk);
 917
 918 /*
 919  *  Public data decl's...
 920  */
 921 extern struct list_head   ioc_list;
 922 extern struct proc_dir_entry    *mpt_proc_root_dir;
 923
 924 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
 925 #endif          /* } __KERNEL__ */
 926
 927 #ifdef CONFIG_64BIT
 928 #define CAST_U32_TO_PTR(x)      ((void *)(u64)x)
 929 #define CAST_PTR_TO_U32(x)      ((u32)(u64)x)
 930 #else
 931 #define CAST_U32_TO_PTR(x)      ((void *)x)
 932 #define CAST_PTR_TO_U32(x)      ((u32)x)
 933 #endif
 934
 935 #define MPT_PROTOCOL_FLAGS_c_c_c_c(pflags) \
 936         ((pflags) & MPI_PORTFACTS_PROTOCOL_INITIATOR)   ? 'I' : 'i',    \
 937         ((pflags) & MPI_PORTFACTS_PROTOCOL_TARGET)      ? 'T' : 't',    \
 938         ((pflags) & MPI_PORTFACTS_PROTOCOL_LAN)         ? 'L' : 'l',    \
 939         ((pflags) & MPI_PORTFACTS_PROTOCOL_LOGBUSADDR)  ? 'B' : 'b'
 940
 941 /*
 942  *  Shifted SGE Defines - Use in SGE with FlagsLength member.
 943  *  Otherwise, use MPI_xxx defines (refer to "lsi/mpi.h" header).
 944  *  Defaults: 32 bit SGE, SYSTEM_ADDRESS if direction bit is 0, read
 945  */
 946 #define MPT_TRANSFER_IOC_TO_HOST                (0x00000000)
 947 #define MPT_TRANSFER_HOST_TO_IOC                (0x04000000)
 948 #define MPT_SGE_FLAGS_LAST_ELEMENT              (0x80000000)
 949 #define MPT_SGE_FLAGS_END_OF_BUFFER             (0x40000000)
 950 #define MPT_SGE_FLAGS_LOCAL_ADDRESS             (0x08000000)
 951 #define MPT_SGE_FLAGS_DIRECTION                 (0x04000000)
 952 #define MPT_SGE_FLAGS_ADDRESSING                (mpt_addr_size() << MPI_SGE_FLAGS_SHIFT)
 953 #define MPT_SGE_FLAGS_END_OF_LIST               (0x01000000)
 954
 955 #define MPT_SGE_FLAGS_TRANSACTION_ELEMENT       (0x00000000)
 956 #define MPT_SGE_FLAGS_SIMPLE_ELEMENT            (0x10000000)
 957 #define MPT_SGE_FLAGS_CHAIN_ELEMENT             (0x30000000)
 958 #define MPT_SGE_FLAGS_ELEMENT_MASK              (0x30000000)
 959
 960 #define MPT_SGE_FLAGS_SSIMPLE_READ \
 961         (MPT_SGE_FLAGS_LAST_ELEMENT |   \
 962          MPT_SGE_FLAGS_END_OF_BUFFER |  \
 963          MPT_SGE_FLAGS_END_OF_LIST |    \
 964          MPT_SGE_FLAGS_SIMPLE_ELEMENT | \
 965          MPT_SGE_FLAGS_ADDRESSING | \
 966          MPT_TRANSFER_IOC_TO_HOST)
 967 #define MPT_SGE_FLAGS_SSIMPLE_WRITE \
 968         (MPT_SGE_FLAGS_LAST_ELEMENT |   \
 969          MPT_SGE_FLAGS_END_OF_BUFFER |  \
 970          MPT_SGE_FLAGS_END_OF_LIST |    \
 971          MPT_SGE_FLAGS_SIMPLE_ELEMENT | \
 972          MPT_SGE_FLAGS_ADDRESSING | \
 973          MPT_TRANSFER_HOST_TO_IOC)
 974
 975 /*}-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
 976 #endif
 977