drivers/hwmon/adm1029.c

   1 /*
   2  * adm1029.c - Part of lm_sensors, Linux kernel modules for hardware monitoring
   3  *
   4  * Copyright (C) 2006 Corentin LABBE <corentin.labbe@geomatys.fr>
   5  *
   6  * Based on LM83 Driver by Jean Delvare <khali@linux-fr.org>
   7  *
   8  * Give only processor, motherboard temperatures and fan tachs
   9  * Very rare chip please let me know if you use it
  10  *
  11  * http://www.analog.com/UploadedFiles/Data_Sheets/ADM1029.pdf
  12  *
  13  *
  14  * This program is free software; you can redistribute it and/or modify
  15  * it under the terms of the GNU General Public License as published by
  16  * the Free Software Foundation version 2 of the License
  17  *
  18  * This program is distributed in the hope that it will be useful,
  19  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  20  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  21  * GNU General Public License for more details.
  22  *
  23  * You should have received a copy of the GNU General Public License
  24  * along with this program; if not, write to the Free Software
  25  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  26  */
  27
  28 #include <linux/module.h>
  29 #include <linux/init.h>
  30 #include <linux/slab.h>
  31 #include <linux/jiffies.h>
  32 #include <linux/i2c.h>
  33 #include <linux/hwmon-sysfs.h>
  34 #include <linux/hwmon.h>
  35 #include <linux/err.h>
  36 #include <linux/mutex.h>
  37
  38 /*
  39  * Addresses to scan
  40  */
  41
  42 static unsigned short normal_i2c[] = {
  43         0x28, 0x29, 0x2a,
  44         0x2b, 0x2c, 0x2d,
  45         0x2e, 0x2f, I2C_CLIENT_END
  46 };
  47
  48 /*
  49  * Insmod parameters
  50  */
  51
  52 I2C_CLIENT_INSMOD_1(adm1029);
  53
  54 /*
  55  * The ADM1029 registers
  56  * Manufacturer ID is 0x41 for Analog Devices
  57  */
  58
  59 #define ADM1029_REG_MAN_ID                      0x0D
  60 #define ADM1029_REG_CHIP_ID                     0x0E
  61 #define ADM1029_REG_CONFIG                      0x01
  62 #define ADM1029_REG_NB_FAN_SUPPORT              0x02
  63
  64 #define ADM1029_REG_TEMP_DEVICES_INSTALLED      0x06
  65
  66 #define ADM1029_REG_LOCAL_TEMP                  0xA0
  67 #define ADM1029_REG_REMOTE1_TEMP                0xA1
  68 #define ADM1029_REG_REMOTE2_TEMP                0xA2
  69
  70 #define ADM1029_REG_LOCAL_TEMP_HIGH             0x90
  71 #define ADM1029_REG_REMOTE1_TEMP_HIGH           0x91
  72 #define ADM1029_REG_REMOTE2_TEMP_HIGH           0x92
  73
  74 #define ADM1029_REG_LOCAL_TEMP_LOW              0x98
  75 #define ADM1029_REG_REMOTE1_TEMP_LOW            0x99
  76 #define ADM1029_REG_REMOTE2_TEMP_LOW            0x9A
  77
  78 #define ADM1029_REG_FAN1                        0x70
  79 #define ADM1029_REG_FAN2                        0x71
  80
  81 #define ADM1029_REG_FAN1_MIN                    0x78
  82 #define ADM1029_REG_FAN2_MIN                    0x79
  83
  84 #define ADM1029_REG_FAN1_CONFIG                 0x68
  85 #define ADM1029_REG_FAN2_CONFIG                 0x69
  86
  87 #define TEMP_FROM_REG(val)      ((val) * 1000)
  88
  89 #define DIV_FROM_REG(val)       ( 1 << (((val) >> 6) - 1))
  90
  91 /* Registers to be checked by adm1029_update_device() */
  92 static const u8 ADM1029_REG_TEMP[] = {
  93         ADM1029_REG_LOCAL_TEMP,
  94         ADM1029_REG_REMOTE1_TEMP,
  95         ADM1029_REG_REMOTE2_TEMP,
  96         ADM1029_REG_LOCAL_TEMP_HIGH,
  97         ADM1029_REG_REMOTE1_TEMP_HIGH,
  98         ADM1029_REG_REMOTE2_TEMP_HIGH,
  99         ADM1029_REG_LOCAL_TEMP_LOW,
 100         ADM1029_REG_REMOTE1_TEMP_LOW,
 101         ADM1029_REG_REMOTE2_TEMP_LOW,
 102 };
 103
 104 static const u8 ADM1029_REG_FAN[] = {
 105         ADM1029_REG_FAN1,
 106         ADM1029_REG_FAN2,
 107         ADM1029_REG_FAN1_MIN,
 108         ADM1029_REG_FAN2_MIN,
 109 };
 110
 111 static const u8 ADM1029_REG_FAN_DIV[] = {
 112         ADM1029_REG_FAN1_CONFIG,
 113         ADM1029_REG_FAN2_CONFIG,
 114 };
 115
 116 /*
 117  * Functions declaration
 118  */
 119
 120 static int adm1029_attach_adapter(struct i2c_adapter *adapter);
 121 static int adm1029_detect(struct i2c_adapter *adapter, int address, int kind);
 122 static int adm1029_detach_client(struct i2c_client *client);
 123 static struct adm1029_data *adm1029_update_device(struct device *dev);
 124 static int adm1029_init_client(struct i2c_client *client);
 125
 126 /*
 127  * Driver data (common to all clients)
 128  */
 129
 130 static struct i2c_driver adm1029_driver = {
 131         .driver = {
 132                 .name = "adm1029",
 133         },
 134         .attach_adapter = adm1029_attach_adapter,
 135         .detach_client = adm1029_detach_client,
 136 };
 137
 138 /*
 139  * Client data (each client gets its own)
 140  */
 141
 142 struct adm1029_data {
 143         struct i2c_client client;
 144         struct device *hwmon_dev;
 145         struct mutex update_lock;
 146         char valid;             /* zero until following fields are valid */
 147         unsigned long last_updated;     /* in jiffies */
 148
 149         /* registers values, signed for temperature, unsigned for other stuff */
 150         s8 temp[ARRAY_SIZE(ADM1029_REG_TEMP)];
 151         u8 fan[ARRAY_SIZE(ADM1029_REG_FAN)];
 152         u8 fan_div[ARRAY_SIZE(ADM1029_REG_FAN_DIV)];
 153 };
 154
 155 /*
 156  * Sysfs stuff
 157  */
 158
 159 static ssize_t
 160 show_temp(struct device *dev, struct device_attribute *devattr, char *buf)
 161 {
 162         struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
 163         struct adm1029_data *data = adm1029_update_device(dev);
 164         return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp[attr->index]));
 165 }
 166
 167 static ssize_t
 168 show_fan(struct device *dev, struct device_attribute *devattr, char *buf)
 169 {
 170         struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
 171         struct adm1029_data *data = adm1029_update_device(dev);
 172         u16 val;
 173         if (data->fan[attr->index] == 0 || data->fan_div[attr->index] == 0
 174             || data->fan[attr->index] == 255) {
 175                 return sprintf(buf, "0\n");
 176         }
 177
 178         val = 1880 * 120 / DIV_FROM_REG(data->fan_div[attr->index])
 179             / data->fan[attr->index];
 180         return sprintf(buf, "%d\n", val);
 181 }
 182
 183 static ssize_t
 184 show_fan_div(struct device *dev, struct device_attribute *devattr, char *buf)
 185 {
 186         struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
 187         struct adm1029_data *data = adm1029_update_device(dev);
 188         if (data->fan_div[attr->index] == 0)
 189                 return sprintf(buf, "0\n");
 190         return sprintf(buf, "%d\n", DIV_FROM_REG(data->fan_div[attr->index]));
 191 }
 192
 193 static ssize_t set_fan_div(struct device *dev,
 194             struct device_attribute *devattr, const char *buf, size_t count)
 195 {
 196         struct i2c_client *client = to_i2c_client(dev);
 197         struct adm1029_data *data = i2c_get_clientdata(client);
 198         struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
 199         long val = simple_strtol(buf, NULL, 10);
 200         u8 reg;
 201
 202         mutex_lock(&data->update_lock);
 203
 204         /*Read actual config */
 205         reg = i2c_smbus_read_byte_data(client,
 206                                        ADM1029_REG_FAN_DIV[attr->index]);
 207
 208         switch (val) {
 209         case 1:
 210                 val = 1;
 211                 break;
 212         case 2:
 213                 val = 2;
 214                 break;
 215         case 4:
 216                 val = 3;
 217                 break;
 218         default:
 219                 mutex_unlock(&data->update_lock);
 220                 dev_err(&client->dev, "fan_div value %ld not "
 221                         "supported. Choose one of 1, 2 or 4!\n", val);
 222                 return -EINVAL;
 223         }
 224         /* Update the value */
 225         reg = (reg & 0x3F) | (val << 6);
 226
 227         /* Write value */
 228         i2c_smbus_write_byte_data(client,
 229                                   ADM1029_REG_FAN_DIV[attr->index], reg);
 230         mutex_unlock(&data->update_lock);
 231
 232         return count;
 233 }
 234
 235 /*
 236 Access rights on sysfs, S_IRUGO stand for Is Readable by User, Group and Others
 237                         S_IWUSR stand for Is Writable by User
 238 */
 239 static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_temp, NULL, 0);
 240 static SENSOR_DEVICE_ATTR(temp2_input, S_IRUGO, show_temp, NULL, 1);
 241 static SENSOR_DEVICE_ATTR(temp3_input, S_IRUGO, show_temp, NULL, 2);
 242
 243 static SENSOR_DEVICE_ATTR(temp1_max, S_IRUGO, show_temp, NULL, 3);
 244 static SENSOR_DEVICE_ATTR(temp2_max, S_IRUGO, show_temp, NULL, 4);
 245 static SENSOR_DEVICE_ATTR(temp3_max, S_IRUGO, show_temp, NULL, 5);
 246
 247 static SENSOR_DEVICE_ATTR(temp1_min, S_IRUGO, show_temp, NULL, 6);
 248 static SENSOR_DEVICE_ATTR(temp2_min, S_IRUGO, show_temp, NULL, 7);
 249 static SENSOR_DEVICE_ATTR(temp3_min, S_IRUGO, show_temp, NULL, 8);
 250
 251 static SENSOR_DEVICE_ATTR(fan1_input, S_IRUGO, show_fan, NULL, 0);
 252 static SENSOR_DEVICE_ATTR(fan2_input, S_IRUGO, show_fan, NULL, 1);
 253
 254 static SENSOR_DEVICE_ATTR(fan1_min, S_IRUGO, show_fan, NULL, 2);
 255 static SENSOR_DEVICE_ATTR(fan2_min, S_IRUGO, show_fan, NULL, 3);
 256
 257 static SENSOR_DEVICE_ATTR(fan1_div, S_IRUGO | S_IWUSR,
 258                           show_fan_div, set_fan_div, 0);
 259 static SENSOR_DEVICE_ATTR(fan2_div, S_IRUGO | S_IWUSR,
 260                           show_fan_div, set_fan_div, 1);
 261
 262 static struct attribute *adm1029_attributes[] = {
 263         &sensor_dev_attr_temp1_input.dev_attr.attr,
 264         &sensor_dev_attr_temp1_min.dev_attr.attr,
 265         &sensor_dev_attr_temp1_max.dev_attr.attr,
 266         &sensor_dev_attr_temp2_input.dev_attr.attr,
 267         &sensor_dev_attr_temp2_min.dev_attr.attr,
 268         &sensor_dev_attr_temp2_max.dev_attr.attr,
 269         &sensor_dev_attr_temp3_input.dev_attr.attr,
 270         &sensor_dev_attr_temp3_min.dev_attr.attr,
 271         &sensor_dev_attr_temp3_max.dev_attr.attr,
 272         &sensor_dev_attr_fan1_input.dev_attr.attr,
 273         &sensor_dev_attr_fan2_input.dev_attr.attr,
 274         &sensor_dev_attr_fan1_min.dev_attr.attr,
 275         &sensor_dev_attr_fan2_min.dev_attr.attr,
 276         &sensor_dev_attr_fan1_div.dev_attr.attr,
 277         &sensor_dev_attr_fan2_div.dev_attr.attr,
 278         NULL
 279 };
 280
 281 static const struct attribute_group adm1029_group = {
 282         .attrs = adm1029_attributes,
 283 };
 284
 285 /*
 286  * Real code
 287  */
 288
 289 static int adm1029_attach_adapter(struct i2c_adapter *adapter)
 290 {
 291         if (!(adapter->class & I2C_CLASS_HWMON))
 292                 return 0;
 293         return i2c_probe(adapter, &addr_data, adm1029_detect);
 294 }
 295
 296 /*
 297  * The following function does more than just detection. If detection
 298  * succeeds, it also registers the new chip.
 299  */
 300
 301 static int adm1029_detect(struct i2c_adapter *adapter, int address, int kind)
 302 {
 303         struct i2c_client *client;
 304         struct adm1029_data *data;
 305         int err = 0;
 306         const char *name = "";
 307         if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
 308                 goto exit;
 309
 310         if (!(data = kzalloc(sizeof(struct adm1029_data), GFP_KERNEL))) {
 311                 err = -ENOMEM;
 312                 goto exit;
 313         }
 314
 315         client = &data->client;
 316         i2c_set_clientdata(client, data);
 317         client->addr = address;
 318         client->adapter = adapter;
 319         client->driver = &adm1029_driver;
 320
 321         /* Now we do the detection and identification. A negative kind
 322          * means that the driver was loaded with no force parameter
 323          * (default), so we must both detect and identify the chip
 324          * (actually there is only one possible kind of chip for now, adm1029).
 325          * A zero kind means that the driver was loaded with the force
 326          * parameter, the detection step shall be skipped. A positive kind
 327          * means that the driver was loaded with the force parameter and a
 328          * given kind of chip is requested, so both the detection and the
 329          * identification steps are skipped. */
 330
 331         /* Default to an adm1029 if forced */
 332         if (kind == 0)
 333                 kind = adm1029;
 334
 335         /* ADM1029 doesn't have CHIP ID, check just MAN ID
 336          * For better detection we check also ADM1029_TEMP_DEVICES_INSTALLED,
 337          * ADM1029_REG_NB_FAN_SUPPORT and compare it with possible values
 338          * documented
 339          */
 340
 341         if (kind <= 0) {        /* identification */
 342                 u8 man_id, chip_id, temp_devices_installed, nb_fan_support;
 343
 344                 man_id = i2c_smbus_read_byte_data(client, ADM1029_REG_MAN_ID);
 345                 chip_id = i2c_smbus_read_byte_data(client, ADM1029_REG_CHIP_ID);
 346                 temp_devices_installed = i2c_smbus_read_byte_data(client,
 347                                         ADM1029_REG_TEMP_DEVICES_INSTALLED);
 348                 nb_fan_support = i2c_smbus_read_byte_data(client,
 349                                                 ADM1029_REG_NB_FAN_SUPPORT);
 350                 /* 0x41 is Analog Devices */
 351                 if (man_id == 0x41 && (temp_devices_installed & 0xf9) == 0x01
 352                     && nb_fan_support == 0x03) {
 353                         if ((chip_id & 0xF0) == 0x00) {
 354                                 kind = adm1029;
 355                         } else {
 356                                 /* There are no "official" CHIP ID, so actually
 357                                  * we use Major/Minor revision for that */
 358                                 printk(KERN_INFO
 359                                        "adm1029: Unknown major revision %x, "
 360                                        "please let us know\n", chip_id);
 361                         }
 362                 }
 363
 364                 if (kind <= 0) {        /* identification failed */
 365                         pr_debug("adm1029: Unsupported chip (man_id=0x%02X, "
 366                                  "chip_id=0x%02X)\n", man_id, chip_id);
 367                         goto exit_free;
 368                 }
 369         }
 370
 371         if (kind == adm1029) {
 372                 name = "adm1029";
 373         }
 374
 375         /* We can fill in the remaining client fields */
 376         strlcpy(client->name, name, I2C_NAME_SIZE);
 377         mutex_init(&data->update_lock);
 378
 379         /* Tell the I2C layer a new client has arrived */
 380         if ((err = i2c_attach_client(client)))
 381                 goto exit_free;
 382
 383         /*
 384          * Initialize the ADM1029 chip
 385          * Check config register
 386          */
 387         if (adm1029_init_client(client) == 0)
 388                 goto exit_detach;
 389
 390         /* Register sysfs hooks */
 391         if ((err = sysfs_create_group(&client->dev.kobj, &adm1029_group)))
 392                 goto exit_detach;
 393
 394         data->hwmon_dev = hwmon_device_register(&client->dev);
 395         if (IS_ERR(data->hwmon_dev)) {
 396                 err = PTR_ERR(data->hwmon_dev);
 397                 goto exit_remove_files;
 398         }
 399
 400         return 0;
 401
 402  exit_remove_files:
 403         sysfs_remove_group(&client->dev.kobj, &adm1029_group);
 404  exit_detach:
 405         i2c_detach_client(client);
 406  exit_free:
 407         kfree(data);
 408  exit:
 409         return err;
 410 }
 411
 412 static int adm1029_init_client(struct i2c_client *client)
 413 {
 414         u8 config;
 415         config = i2c_smbus_read_byte_data(client, ADM1029_REG_CONFIG);
 416         if ((config & 0x10) == 0) {
 417                 i2c_smbus_write_byte_data(client, ADM1029_REG_CONFIG,
 418                                           config | 0x10);
 419         }
 420         /* recheck config */
 421         config = i2c_smbus_read_byte_data(client, ADM1029_REG_CONFIG);
 422         if ((config & 0x10) == 0) {
 423                 dev_err(&client->dev, "Initialization failed!\n");
 424                 return 0;
 425         }
 426         return 1;
 427 }
 428
 429 static int adm1029_detach_client(struct i2c_client *client)
 430 {
 431         struct adm1029_data *data = i2c_get_clientdata(client);
 432         int err;
 433
 434         hwmon_device_unregister(data->hwmon_dev);
 435         sysfs_remove_group(&client->dev.kobj, &adm1029_group);
 436
 437         if ((err = i2c_detach_client(client)))
 438                 return err;
 439
 440         kfree(data);
 441         return 0;
 442 }
 443
 444 /*
 445 function that update the status of the chips (temperature for exemple)
 446 */
 447 static struct adm1029_data *adm1029_update_device(struct device *dev)
 448 {
 449         struct i2c_client *client = to_i2c_client(dev);
 450         struct adm1029_data *data = i2c_get_clientdata(client);
 451
 452         mutex_lock(&data->update_lock);
 453         /*
 454          * Use the "cache" Luke, don't recheck values
 455          * if there are already checked not a long time later
 456          */
 457         if (time_after(jiffies, data->last_updated + HZ * 2)
 458          || !data->valid) {
 459                 int nr;
 460
 461                 dev_dbg(&client->dev, "Updating adm1029 data\n");
 462
 463                 for (nr = 0; nr < ARRAY_SIZE(ADM1029_REG_TEMP); nr++) {
 464                         data->temp[nr] =
 465                             i2c_smbus_read_byte_data(client,
 466                                                      ADM1029_REG_TEMP[nr]);
 467                 }
 468                 for (nr = 0; nr < ARRAY_SIZE(ADM1029_REG_FAN); nr++) {
 469                         data->fan[nr] =
 470                             i2c_smbus_read_byte_data(client,
 471                                                      ADM1029_REG_FAN[nr]);
 472                 }
 473                 for (nr = 0; nr < ARRAY_SIZE(ADM1029_REG_FAN_DIV); nr++) {
 474                         data->fan_div[nr] =
 475                             i2c_smbus_read_byte_data(client,
 476                                                      ADM1029_REG_FAN_DIV[nr]);
 477                 }
 478
 479                 data->last_updated = jiffies;
 480                 data->valid = 1;
 481         }
 482
 483         mutex_unlock(&data->update_lock);
 484
 485         return data;
 486 }
 487
 488 /*
 489         Common module stuff
 490 */
 491 static int __init sensors_adm1029_init(void)
 492 {
 493
 494         return i2c_add_driver(&adm1029_driver);
 495 }
 496
 497 static void __exit sensors_adm1029_exit(void)
 498 {
 499
 500         i2c_del_driver(&adm1029_driver);
 501 }
 502
 503 MODULE_AUTHOR("Corentin LABBE <corentin.labbe@geomatys.fr>");
 504 MODULE_DESCRIPTION("adm1029 driver");
 505 MODULE_LICENSE("GPL v2");
 506
 507 module_init(sensors_adm1029_init);
 508 module_exit(sensors_adm1029_exit);