drivers/net/tehuti.c

   1 /*
   2  * Tehuti Networks(R) Network Driver
   3  * ethtool interface implementation
   4  * Copyright (C) 2007 Tehuti Networks Ltd. All rights reserved
   5  *
   6  * This program is free software; you can redistribute it and/or modify
   7  * it under the terms of the GNU General Public License as published by
   8  * the Free Software Foundation; either version 2 of the License, or
   9  * (at your option) any later version.
  10  */
  11
  12 /*
  13  * RX HW/SW interaction overview
  14  * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  15  * There are 2 types of RX communication channels betwean driver and NIC.
  16  * 1) RX Free Fifo - RXF - holds descriptors of empty buffers to accept incoming
  17  * traffic. This Fifo is filled by SW and is readen by HW. Each descriptor holds
  18  * info about buffer's location, size and ID. An ID field is used to identify a
  19  * buffer when it's returned with data via RXD Fifo (see below)
  20  * 2) RX Data Fifo - RXD - holds descriptors of full buffers. This Fifo is
  21  * filled by HW and is readen by SW. Each descriptor holds status and ID.
  22  * HW pops descriptor from RXF Fifo, stores ID, fills buffer with incoming data,
  23  * via dma moves it into host memory, builds new RXD descriptor with same ID,
  24  * pushes it into RXD Fifo and raises interrupt to indicate new RX data.
  25  *
  26  * Current NIC configuration (registers + firmware) makes NIC use 2 RXF Fifos.
  27  * One holds 1.5K packets and another - 26K packets. Depending on incoming
  28  * packet size, HW desides on a RXF Fifo to pop buffer from. When packet is
  29  * filled with data, HW builds new RXD descriptor for it and push it into single
  30  * RXD Fifo.
  31  *
  32  * RX SW Data Structures
  33  * ~~~~~~~~~~~~~~~~~~~~~
  34  * skb db - used to keep track of all skbs owned by SW and their dma addresses.
  35  * For RX case, ownership lasts from allocating new empty skb for RXF until
  36  * accepting full skb from RXD and passing it to OS. Each RXF Fifo has its own
  37  * skb db. Implemented as array with bitmask.
  38  * fifo - keeps info about fifo's size and location, relevant HW registers,
  39  * usage and skb db. Each RXD and RXF Fifo has its own fifo structure.
  40  * Implemented as simple struct.
  41  *
  42  * RX SW Execution Flow
  43  * ~~~~~~~~~~~~~~~~~~~~
  44  * Upon initialization (ifconfig up) driver creates RX fifos and initializes
  45  * relevant registers. At the end of init phase, driver enables interrupts.
  46  * NIC sees that there is no RXF buffers and raises
  47  * RD_INTR interrupt, isr fills skbs and Rx begins.
  48  * Driver has two receive operation modes:
  49  *    NAPI - interrupt-driven mixed with polling
  50  *    interrupt-driven only
  51  *
  52  * Interrupt-driven only flow is following. When buffer is ready, HW raises
  53  * interrupt and isr is called. isr collects all available packets
  54  * (bdx_rx_receive), refills skbs (bdx_rx_alloc_skbs) and exit.
  55
  56  * Rx buffer allocation note
  57  * ~~~~~~~~~~~~~~~~~~~~~~~~~
  58  * Driver cares to feed such amount of RxF descriptors that respective amount of
  59  * RxD descriptors can not fill entire RxD fifo. The main reason is lack of
  60  * overflow check in Bordeaux for RxD fifo free/used size.
  61  * FIXME: this is NOT fully implemented, more work should be done
  62  *
  63  */
  64
  65 #include "tehuti.h"
  66 #include "tehuti_fw.h"
  67
  68 static struct pci_device_id __devinitdata bdx_pci_tbl[] = {
  69         {0x1FC9, 0x3009, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
  70         {0x1FC9, 0x3010, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
  71         {0x1FC9, 0x3014, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
  72         {0}
  73 };
  74
  75 MODULE_DEVICE_TABLE(pci, bdx_pci_tbl);
  76
  77 /* Definitions needed by ISR or NAPI functions */
  78 static void bdx_rx_alloc_skbs(struct bdx_priv *priv, struct rxf_fifo *f);
  79 static void bdx_tx_cleanup(struct bdx_priv *priv);
  80 static int bdx_rx_receive(struct bdx_priv *priv, struct rxd_fifo *f, int budget);
  81
  82 /* Definitions needed by FW loading */
  83 static void bdx_tx_push_desc_safe(struct bdx_priv *priv, void *data, int size);
  84
  85 /* Definitions needed by hw_start */
  86 static int bdx_tx_init(struct bdx_priv *priv);
  87 static int bdx_rx_init(struct bdx_priv *priv);
  88
  89 /* Definitions needed by bdx_close */
  90 static void bdx_rx_free(struct bdx_priv *priv);
  91 static void bdx_tx_free(struct bdx_priv *priv);
  92
  93 /* Definitions needed by bdx_probe */
  94 static void bdx_ethtool_ops(struct net_device *netdev);
  95
  96 /*************************************************************************
  97  *    Print Info                                                         *
  98  *************************************************************************/
  99
 100 static void print_hw_id(struct pci_dev *pdev)
 101 {
 102         struct pci_nic *nic = pci_get_drvdata(pdev);
 103         u16 pci_link_status = 0;
 104         u16 pci_ctrl = 0;
 105
 106         pci_read_config_word(pdev, PCI_LINK_STATUS_REG, &pci_link_status);
 107         pci_read_config_word(pdev, PCI_DEV_CTRL_REG, &pci_ctrl);
 108
 109         printk(KERN_INFO "tehuti: %s%s\n", BDX_NIC_NAME,
 110                nic->port_num == 1 ? "" : ", 2-Port");
 111         printk(KERN_INFO
 112                "tehuti: srom 0x%x fpga %d build %u lane# %d"
 113                " max_pl 0x%x mrrs 0x%x\n",
 114                readl(nic->regs + SROM_VER), readl(nic->regs + FPGA_VER) & 0xFFF,
 115                readl(nic->regs + FPGA_SEED),
 116                GET_LINK_STATUS_LANES(pci_link_status),
 117                GET_DEV_CTRL_MAXPL(pci_ctrl), GET_DEV_CTRL_MRRS(pci_ctrl));
 118 }
 119
 120 static void print_fw_id(struct pci_nic *nic)
 121 {
 122         printk(KERN_INFO "tehuti: fw 0x%x\n", readl(nic->regs + FW_VER));
 123 }
 124
 125 static void print_eth_id(struct net_device *ndev)
 126 {
 127         printk(KERN_INFO "%s: %s, Port %c\n", ndev->name, BDX_NIC_NAME,
 128                (ndev->if_port == 0) ? 'A' : 'B');
 129
 130 }
 131
 132 /*************************************************************************
 133  *    Code                                                               *
 134  *************************************************************************/
 135
 136 #define bdx_enable_interrupts(priv)     \
 137         do { WRITE_REG(priv, regIMR, IR_RUN); } while (0)
 138 #define bdx_disable_interrupts(priv)    \
 139         do { WRITE_REG(priv, regIMR, 0); } while (0)
 140
 141 /* bdx_fifo_init
 142  * create TX/RX descriptor fifo for host-NIC communication.
 143  * 1K extra space is allocated at the end of the fifo to simplify
 144  * processing of descriptors that wraps around fifo's end
 145  * @priv - NIC private structure
 146  * @f - fifo to initialize
 147  * @fsz_type - fifo size type: 0-4KB, 1-8KB, 2-16KB, 3-32KB
 148  * @reg_XXX - offsets of registers relative to base address
 149  *
 150  * Returns 0 on success, negative value on failure
 151  *
 152  */
 153 static int
 154 bdx_fifo_init(struct bdx_priv *priv, struct fifo *f, int fsz_type,
 155               u16 reg_CFG0, u16 reg_CFG1, u16 reg_RPTR, u16 reg_WPTR)
 156 {
 157         u16 memsz = FIFO_SIZE * (1 << fsz_type);
 158
 159         memset(f, 0, sizeof(struct fifo));
 160         /* pci_alloc_consistent gives us 4k-aligned memory */
 161         f->va = pci_alloc_consistent(priv->pdev,
 162                                      memsz + FIFO_EXTRA_SPACE, &f->da);
 163         if (!f->va) {
 164                 ERR("pci_alloc_consistent failed\n");
 165                 RET(-ENOMEM);
 166         }
 167         f->reg_CFG0 = reg_CFG0;
 168         f->reg_CFG1 = reg_CFG1;
 169         f->reg_RPTR = reg_RPTR;
 170         f->reg_WPTR = reg_WPTR;
 171         f->rptr = 0;
 172         f->wptr = 0;
 173         f->memsz = memsz;
 174         f->size_mask = memsz - 1;
 175         WRITE_REG(priv, reg_CFG0, (u32) ((f->da & TX_RX_CFG0_BASE) | fsz_type));
 176         WRITE_REG(priv, reg_CFG1, H32_64(f->da));
 177
 178         RET(0);
 179 }
 180
 181 /* bdx_fifo_free - free all resources used by fifo
 182  * @priv - NIC private structure
 183  * @f - fifo to release
 184  */
 185 static void bdx_fifo_free(struct bdx_priv *priv, struct fifo *f)
 186 {
 187         ENTER;
 188         if (f->va) {
 189                 pci_free_consistent(priv->pdev,
 190                                     f->memsz + FIFO_EXTRA_SPACE, f->va, f->da);
 191                 f->va = NULL;
 192         }
 193         RET();
 194 }
 195
 196 /*
 197  * bdx_link_changed - notifies OS about hw link state.
 198  * @bdx_priv - hw adapter structure
 199  */
 200 static void bdx_link_changed(struct bdx_priv *priv)
 201 {
 202         u32 link = READ_REG(priv, regMAC_LNK_STAT) & MAC_LINK_STAT;
 203
 204         if (!link) {
 205                 if (netif_carrier_ok(priv->ndev)) {
 206                         netif_stop_queue(priv->ndev);
 207                         netif_carrier_off(priv->ndev);
 208                         ERR("%s: Link Down\n", priv->ndev->name);
 209                 }
 210         } else {
 211                 if (!netif_carrier_ok(priv->ndev)) {
 212                         netif_wake_queue(priv->ndev);
 213                         netif_carrier_on(priv->ndev);
 214                         ERR("%s: Link Up\n", priv->ndev->name);
 215                 }
 216         }
 217 }
 218
 219 static void bdx_isr_extra(struct bdx_priv *priv, u32 isr)
 220 {
 221         if (isr & IR_RX_FREE_0) {
 222                 bdx_rx_alloc_skbs(priv, &priv->rxf_fifo0);
 223                 DBG("RX_FREE_0\n");
 224         }
 225
 226         if (isr & IR_LNKCHG0)
 227                 bdx_link_changed(priv);
 228
 229         if (isr & IR_PCIE_LINK)
 230                 ERR("%s: PCI-E Link Fault\n", priv->ndev->name);
 231
 232         if (isr & IR_PCIE_TOUT)
 233                 ERR("%s: PCI-E Time Out\n", priv->ndev->name);
 234
 235 }
 236
 237 /* bdx_isr - Interrupt Service Routine for Bordeaux NIC
 238  * @irq - interrupt number
 239  * @ndev - network device
 240  * @regs - CPU registers
 241  *
 242  * Return IRQ_NONE if it was not our interrupt, IRQ_HANDLED - otherwise
 243  *
 244  * It reads ISR register to know interrupt reasons, and proceed them one by one.
 245  * Reasons of interest are:
 246  *    RX_DESC - new packet has arrived and RXD fifo holds its descriptor
 247  *    RX_FREE - number of free Rx buffers in RXF fifo gets low
 248  *    TX_FREE - packet was transmited and RXF fifo holds its descriptor
 249  */
 250
 251 static irqreturn_t bdx_isr_napi(int irq, void *dev)
 252 {
 253         struct net_device *ndev = dev;
 254         struct bdx_priv *priv = ndev->priv;
 255         u32 isr;
 256
 257         ENTER;
 258         isr = (READ_REG(priv, regISR) & IR_RUN);
 259         if (unlikely(!isr)) {
 260                 bdx_enable_interrupts(priv);
 261                 return IRQ_NONE;        /* Not our interrupt */
 262         }
 263
 264         if (isr & IR_EXTRA)
 265                 bdx_isr_extra(priv, isr);
 266
 267         if (isr & (IR_RX_DESC_0 | IR_TX_FREE_0)) {
 268                 if (likely(netif_rx_schedule_prep(ndev, &priv->napi))) {
 269                         __netif_rx_schedule(ndev, &priv->napi);
 270                         RET(IRQ_HANDLED);
 271                 } else {
 272                         /* NOTE: we get here if intr has slipped into window
 273                          * between these lines in bdx_poll:
 274                          *    bdx_enable_interrupts(priv);
 275                          *    return 0;
 276                          * currently intrs are disabled (since we read ISR),
 277                          * and we have failed to register next poll.
 278                          * so we read the regs to trigger chip
 279                          * and allow further interupts. */
 280                         READ_REG(priv, regTXF_WPTR_0);
 281                         READ_REG(priv, regRXD_WPTR_0);
 282                 }
 283         }
 284
 285         bdx_enable_interrupts(priv);
 286         RET(IRQ_HANDLED);
 287 }
 288
 289 static int bdx_poll(struct napi_struct *napi, int budget)
 290 {
 291         struct bdx_priv *priv = container_of(napi, struct bdx_priv, napi);
 292         struct net_device *dev = priv->ndev;
 293         int work_done;
 294
 295         ENTER;
 296         bdx_tx_cleanup(priv);
 297         work_done = bdx_rx_receive(priv, &priv->rxd_fifo0, budget);
 298         if ((work_done < budget) ||
 299             (priv->napi_stop++ >= 30)) {
 300                 DBG("rx poll is done. backing to isr-driven\n");
 301
 302                 /* from time to time we exit to let NAPI layer release
 303                  * device lock and allow waiting tasks (eg rmmod) to advance) */
 304                 priv->napi_stop = 0;
 305
 306                 netif_rx_complete(dev, napi);
 307                 bdx_enable_interrupts(priv);
 308         }
 309         return work_done;
 310 }
 311
 312 /* bdx_fw_load - loads firmware to NIC
 313  * @priv - NIC private structure
 314  * Firmware is loaded via TXD fifo, so it must be initialized first.
 315  * Firware must be loaded once per NIC not per PCI device provided by NIC (NIC
 316  * can have few of them). So all drivers use semaphore register to choose one
 317  * that will actually load FW to NIC.
 318  */
 319
 320 static int bdx_fw_load(struct bdx_priv *priv)
 321 {
 322         int master, i;
 323
 324         ENTER;
 325         master = READ_REG(priv, regINIT_SEMAPHORE);
 326         if (!READ_REG(priv, regINIT_STATUS) && master) {
 327                 bdx_tx_push_desc_safe(priv, s_firmLoad, sizeof(s_firmLoad));
 328                 mdelay(100);
 329         }
 330         for (i = 0; i < 200; i++) {
 331                 if (READ_REG(priv, regINIT_STATUS))
 332                         break;
 333                 mdelay(2);
 334         }
 335         if (master)
 336                 WRITE_REG(priv, regINIT_SEMAPHORE, 1);
 337
 338         if (i == 200) {
 339                 ERR("%s: firmware loading failed\n", priv->ndev->name);
 340                 DBG("VPC = 0x%x VIC = 0x%x INIT_STATUS = 0x%x i=%d\n",
 341                     READ_REG(priv, regVPC),
 342                     READ_REG(priv, regVIC), READ_REG(priv, regINIT_STATUS), i);
 343                 RET(-EIO);
 344         } else {
 345                 DBG("%s: firmware loading success\n", priv->ndev->name);
 346                 RET(0);
 347         }
 348 }
 349
 350 static void bdx_restore_mac(struct net_device *ndev, struct bdx_priv *priv)
 351 {
 352         u32 val;
 353
 354         ENTER;
 355         DBG("mac0=%x mac1=%x mac2=%x\n",
 356             READ_REG(priv, regUNC_MAC0_A),
 357             READ_REG(priv, regUNC_MAC1_A), READ_REG(priv, regUNC_MAC2_A));
 358
 359         val = (ndev->dev_addr[0] << 8) | (ndev->dev_addr[1]);
 360         WRITE_REG(priv, regUNC_MAC2_A, val);
 361         val = (ndev->dev_addr[2] << 8) | (ndev->dev_addr[3]);
 362         WRITE_REG(priv, regUNC_MAC1_A, val);
 363         val = (ndev->dev_addr[4] << 8) | (ndev->dev_addr[5]);
 364         WRITE_REG(priv, regUNC_MAC0_A, val);
 365
 366         DBG("mac0=%x mac1=%x mac2=%x\n",
 367             READ_REG(priv, regUNC_MAC0_A),
 368             READ_REG(priv, regUNC_MAC1_A), READ_REG(priv, regUNC_MAC2_A));
 369         RET();
 370 }
 371
 372 /* bdx_hw_start - inits registers and starts HW's Rx and Tx engines
 373  * @priv - NIC private structure
 374  */
 375 static int bdx_hw_start(struct bdx_priv *priv)
 376 {
 377         int rc = -EIO;
 378         struct net_device *ndev = priv->ndev;
 379
 380         ENTER;
 381         bdx_link_changed(priv);
 382
 383         /* 10G overall max length (vlan, eth&ip header, ip payload, crc) */
 384         WRITE_REG(priv, regFRM_LENGTH, 0X3FE0);
 385         WRITE_REG(priv, regPAUSE_QUANT, 0x96);
 386         WRITE_REG(priv, regRX_FIFO_SECTION, 0x800010);
 387         WRITE_REG(priv, regTX_FIFO_SECTION, 0xE00010);
 388         WRITE_REG(priv, regRX_FULLNESS, 0);
 389         WRITE_REG(priv, regTX_FULLNESS, 0);
 390         WRITE_REG(priv, regCTRLST,
 391                   regCTRLST_BASE | regCTRLST_RX_ENA | regCTRLST_TX_ENA);
 392
 393         WRITE_REG(priv, regVGLB, 0);
 394         WRITE_REG(priv, regMAX_FRAME_A,
 395                   priv->rxf_fifo0.m.pktsz & MAX_FRAME_AB_VAL);
 396
 397         DBG("RDINTCM=%08x\n", priv->rdintcm);   /*NOTE: test script uses this */
 398         WRITE_REG(priv, regRDINTCM0, priv->rdintcm);
 399         WRITE_REG(priv, regRDINTCM2, 0);        /*cpu_to_le32(rcm.val)); */
 400
 401         DBG("TDINTCM=%08x\n", priv->tdintcm);   /*NOTE: test script uses this */
 402         WRITE_REG(priv, regTDINTCM0, priv->tdintcm);    /* old val = 0x300064 */
 403
 404         /* Enable timer interrupt once in 2 secs. */
 405         /*WRITE_REG(priv, regGTMR0, ((GTMR_SEC * 2) & GTMR_DATA)); */
 406         bdx_restore_mac(priv->ndev, priv);
 407
 408         WRITE_REG(priv, regGMAC_RXF_A, GMAC_RX_FILTER_OSEN |
 409                   GMAC_RX_FILTER_AM | GMAC_RX_FILTER_AB);
 410
 411 #define BDX_IRQ_TYPE    ((priv->nic->irq_type == IRQ_MSI)?0:IRQF_SHARED)
 412         if ((rc = request_irq(priv->pdev->irq, &bdx_isr_napi, BDX_IRQ_TYPE,
 413                          ndev->name, ndev)))
 414                 goto err_irq;
 415         bdx_enable_interrupts(priv);
 416
 417         RET(0);
 418
 419 err_irq:
 420         RET(rc);
 421 }
 422
 423 static void bdx_hw_stop(struct bdx_priv *priv)
 424 {
 425         ENTER;
 426         bdx_disable_interrupts(priv);
 427         free_irq(priv->pdev->irq, priv->ndev);
 428
 429         netif_carrier_off(priv->ndev);
 430         netif_stop_queue(priv->ndev);
 431
 432         RET();
 433 }
 434
 435 static int bdx_hw_reset_direct(void __iomem *regs)
 436 {
 437         u32 val, i;
 438         ENTER;
 439
 440         /* reset sequences: read, write 1, read, write 0 */
 441         val = readl(regs + regCLKPLL);
 442         writel((val | CLKPLL_SFTRST) + 0x8, regs + regCLKPLL);
 443         udelay(50);
 444         val = readl(regs + regCLKPLL);
 445         writel(val & ~CLKPLL_SFTRST, regs + regCLKPLL);
 446
 447         /* check that the PLLs are locked and reset ended */
 448         for (i = 0; i < 70; i++, mdelay(10))
 449                 if ((readl(regs + regCLKPLL) & CLKPLL_LKD) == CLKPLL_LKD) {
 450                         /* do any PCI-E read transaction */
 451                         readl(regs + regRXD_CFG0_0);
 452                         return 0;
 453                 }
 454         ERR("tehuti: HW reset failed\n");
 455         return 1;               /* failure */
 456 }
 457
 458 static int bdx_hw_reset(struct bdx_priv *priv)
 459 {
 460         u32 val, i;
 461         ENTER;
 462
 463         if (priv->port == 0) {
 464                 /* reset sequences: read, write 1, read, write 0 */
 465                 val = READ_REG(priv, regCLKPLL);
 466                 WRITE_REG(priv, regCLKPLL, (val | CLKPLL_SFTRST) + 0x8);
 467                 udelay(50);
 468                 val = READ_REG(priv, regCLKPLL);
 469                 WRITE_REG(priv, regCLKPLL, val & ~CLKPLL_SFTRST);
 470         }
 471         /* check that the PLLs are locked and reset ended */
 472         for (i = 0; i < 70; i++, mdelay(10))
 473                 if ((READ_REG(priv, regCLKPLL) & CLKPLL_LKD) == CLKPLL_LKD) {
 474                         /* do any PCI-E read transaction */
 475                         READ_REG(priv, regRXD_CFG0_0);
 476                         return 0;
 477                 }
 478         ERR("tehuti: HW reset failed\n");
 479         return 1;               /* failure */
 480 }
 481
 482 static int bdx_sw_reset(struct bdx_priv *priv)
 483 {
 484         int i;
 485
 486         ENTER;
 487         /* 1. load MAC (obsolete) */
 488         /* 2. disable Rx (and Tx) */
 489         WRITE_REG(priv, regGMAC_RXF_A, 0);
 490         mdelay(100);
 491         /* 3. disable port */
 492         WRITE_REG(priv, regDIS_PORT, 1);
 493         /* 4. disable queue */
 494         WRITE_REG(priv, regDIS_QU, 1);
 495         /* 5. wait until hw is disabled */
 496         for (i = 0; i < 50; i++) {
 497                 if (READ_REG(priv, regRST_PORT) & 1)
 498                         break;
 499                 mdelay(10);
 500         }
 501         if (i == 50)
 502                 ERR("%s: SW reset timeout. continuing anyway\n",
 503                     priv->ndev->name);
 504
 505         /* 6. disable intrs */
 506         WRITE_REG(priv, regRDINTCM0, 0);
 507         WRITE_REG(priv, regTDINTCM0, 0);
 508         WRITE_REG(priv, regIMR, 0);
 509         READ_REG(priv, regISR);
 510
 511         /* 7. reset queue */
 512         WRITE_REG(priv, regRST_QU, 1);
 513         /* 8. reset port */
 514         WRITE_REG(priv, regRST_PORT, 1);
 515         /* 9. zero all read and write pointers */
 516         for (i = regTXD_WPTR_0; i <= regTXF_RPTR_3; i += 0x10)
 517                 DBG("%x = %x\n", i, READ_REG(priv, i) & TXF_WPTR_WR_PTR);
 518         for (i = regTXD_WPTR_0; i <= regTXF_RPTR_3; i += 0x10)
 519                 WRITE_REG(priv, i, 0);
 520         /* 10. unseet port disable */
 521         WRITE_REG(priv, regDIS_PORT, 0);
 522         /* 11. unset queue disable */
 523         WRITE_REG(priv, regDIS_QU, 0);
 524         /* 12. unset queue reset */
 525         WRITE_REG(priv, regRST_QU, 0);
 526         /* 13. unset port reset */
 527         WRITE_REG(priv, regRST_PORT, 0);
 528         /* 14. enable Rx */
 529         /* skiped. will be done later */
 530         /* 15. save MAC (obsolete) */
 531         for (i = regTXD_WPTR_0; i <= regTXF_RPTR_3; i += 0x10)
 532                 DBG("%x = %x\n", i, READ_REG(priv, i) & TXF_WPTR_WR_PTR);
 533
 534         RET(0);
 535 }
 536
 537 /* bdx_reset - performs right type of reset depending on hw type */
 538 static int bdx_reset(struct bdx_priv *priv)
 539 {
 540         ENTER;
 541         RET((priv->pdev->device == 0x3009)
 542             ? bdx_hw_reset(priv)
 543             : bdx_sw_reset(priv));
 544 }
 545
 546 /**
 547  * bdx_close - Disables a network interface
 548  * @netdev: network interface device structure
 549  *
 550  * Returns 0, this is not allowed to fail
 551  *
 552  * The close entry point is called when an interface is de-activated
 553  * by the OS.  The hardware is still under the drivers control, but
 554  * needs to be disabled.  A global MAC reset is issued to stop the
 555  * hardware, and all transmit and receive resources are freed.
 556  **/
 557 static int bdx_close(struct net_device *ndev)
 558 {
 559         struct bdx_priv *priv = NULL;
 560
 561         ENTER;
 562         priv = ndev->priv;
 563
 564         napi_disable(&priv->napi);
 565
 566         bdx_reset(priv);
 567         bdx_hw_stop(priv);
 568         bdx_rx_free(priv);
 569         bdx_tx_free(priv);
 570         RET(0);
 571 }
 572
 573 /**
 574  * bdx_open - Called when a network interface is made active
 575  * @netdev: network interface device structure
 576  *
 577  * Returns 0 on success, negative value on failure
 578  *
 579  * The open entry point is called when a network interface is made
 580  * active by the system (IFF_UP).  At this point all resources needed
 581  * for transmit and receive operations are allocated, the interrupt
 582  * handler is registered with the OS, the watchdog timer is started,
 583  * and the stack is notified that the interface is ready.
 584  **/
 585 static int bdx_open(struct net_device *ndev)
 586 {
 587         struct bdx_priv *priv;
 588         int rc;
 589
 590         ENTER;
 591         priv = ndev->priv;
 592         bdx_reset(priv);
 593         if (netif_running(ndev))
 594                 netif_stop_queue(priv->ndev);
 595
 596         if ((rc = bdx_tx_init(priv)))
 597                 goto err;
 598
 599         if ((rc = bdx_rx_init(priv)))
 600                 goto err;
 601
 602         if ((rc = bdx_fw_load(priv)))
 603                 goto err;
 604
 605         bdx_rx_alloc_skbs(priv, &priv->rxf_fifo0);
 606
 607         if ((rc = bdx_hw_start(priv)))
 608                 goto err;
 609
 610         napi_enable(&priv->napi);
 611
 612         print_fw_id(priv->nic);
 613
 614         RET(0);
 615
 616 err:
 617         bdx_close(ndev);
 618         RET(rc);
 619 }
 620
 621 static void __init bdx_firmware_endianess(void)
 622 {
 623         int i;
 624         for (i = 0; i < sizeof(s_firmLoad) / sizeof(u32); i++)
 625                 s_firmLoad[i] = CPU_CHIP_SWAP32(s_firmLoad[i]);
 626 }
 627
 628 static int bdx_ioctl_priv(struct net_device *ndev, struct ifreq *ifr, int cmd)
 629 {
 630         struct bdx_priv *priv = ndev->priv;
 631         u32 data[3];
 632         int error;
 633
 634         ENTER;
 635
 636         DBG("jiffies=%ld cmd=%d\n", jiffies, cmd);
 637         if (cmd != SIOCDEVPRIVATE) {
 638                 error = copy_from_user(data, ifr->ifr_data, sizeof(data));
 639                 if (error) {
 640                         ERR("cant copy from user\n");
 641                         RET(error);
 642                 }
 643                 DBG("%d 0x%x 0x%x\n", data[0], data[1], data[2]);
 644         }
 645
 646         switch (data[0]) {
 647
 648         case BDX_OP_READ:
 649                 data[2] = READ_REG(priv, data[1]);
 650                 DBG("read_reg(0x%x)=0x%x (dec %d)\n", data[1], data[2],
 651                     data[2]);
 652                 error = copy_to_user(ifr->ifr_data, data, sizeof(data));
 653                 if (error)
 654                         RET(error);
 655                 break;
 656
 657         case BDX_OP_WRITE:
 658                 WRITE_REG(priv, data[1], data[2]);
 659                 DBG("write_reg(0x%x, 0x%x)\n", data[1], data[2]);
 660                 break;
 661
 662         default:
 663                 RET(-EOPNOTSUPP);
 664         }
 665         return 0;
 666 }
 667
 668 static int bdx_ioctl(struct net_device *ndev, struct ifreq *ifr, int cmd)
 669 {
 670         ENTER;
 671         if (cmd >= SIOCDEVPRIVATE && cmd <= (SIOCDEVPRIVATE + 15))
 672                 RET(bdx_ioctl_priv(ndev, ifr, cmd));
 673         else
 674                 RET(-EOPNOTSUPP);
 675 }
 676
 677 /*
 678  * __bdx_vlan_rx_vid - private helper for adding/killing VLAN vid
 679  *                     by passing VLAN filter table to hardware
 680  * @ndev network device
 681  * @vid  VLAN vid
 682  * @op   add or kill operation
 683  */
 684 static void __bdx_vlan_rx_vid(struct net_device *ndev, uint16_t vid, int enable)
 685 {
 686         struct bdx_priv *priv = ndev->priv;
 687         u32 reg, bit, val;
 688
 689         ENTER;
 690         DBG2("vid=%d value=%d\n", (int)vid, enable);
 691         if (unlikely(vid >= 4096)) {
 692                 ERR("tehuti: invalid VID: %u (> 4096)\n", vid);
 693                 RET();
 694         }
 695         reg = regVLAN_0 + (vid / 32) * 4;
 696         bit = 1 << vid % 32;
 697         val = READ_REG(priv, reg);
 698         DBG2("reg=%x, val=%x, bit=%d\n", reg, val, bit);
 699         if (enable)
 700                 val |= bit;
 701         else
 702                 val &= ~bit;
 703         DBG2("new val %x\n", val);
 704         WRITE_REG(priv, reg, val);
 705         RET();
 706 }
 707
 708 /*
 709  * bdx_vlan_rx_add_vid - kernel hook for adding VLAN vid to hw filtering table
 710  * @ndev network device
 711  * @vid  VLAN vid to add
 712  */
 713 static void bdx_vlan_rx_add_vid(struct net_device *ndev, uint16_t vid)
 714 {
 715         __bdx_vlan_rx_vid(ndev, vid, 1);
 716 }
 717
 718 /*
 719  * bdx_vlan_rx_kill_vid - kernel hook for killing VLAN vid in hw filtering table
 720  * @ndev network device
 721  * @vid  VLAN vid to kill
 722  */
 723 static void bdx_vlan_rx_kill_vid(struct net_device *ndev, unsigned short vid)
 724 {
 725         __bdx_vlan_rx_vid(ndev, vid, 0);
 726 }
 727
 728 /*
 729  * bdx_vlan_rx_register - kernel hook for adding VLAN group
 730  * @ndev network device
 731  * @grp  VLAN group
 732  */
 733 static void
 734 bdx_vlan_rx_register(struct net_device *ndev, struct vlan_group *grp)
 735 {
 736         struct bdx_priv *priv = ndev->priv;
 737
 738         ENTER;
 739         DBG("device='%s', group='%p'\n", ndev->name, grp);
 740         priv->vlgrp = grp;
 741         RET();
 742 }
 743
 744 /**
 745  * bdx_change_mtu - Change the Maximum Transfer Unit
 746  * @netdev: network interface device structure
 747  * @new_mtu: new value for maximum frame size
 748  *
 749  * Returns 0 on success, negative on failure
 750  */
 751 static int bdx_change_mtu(struct net_device *ndev, int new_mtu)
 752 {
 753         ENTER;
 754
 755         if (new_mtu == ndev->mtu)
 756                 RET(0);
 757
 758         /* enforce minimum frame size */
 759         if (new_mtu < ETH_ZLEN) {
 760                 ERR("%s: %s mtu %d is less then minimal %d\n",
 761                     BDX_DRV_NAME, ndev->name, new_mtu, ETH_ZLEN);
 762                 RET(-EINVAL);
 763         }
 764
 765         ndev->mtu = new_mtu;
 766         if (netif_running(ndev)) {
 767                 bdx_close(ndev);
 768                 bdx_open(ndev);
 769         }
 770         RET(0);
 771 }
 772
 773 static void bdx_setmulti(struct net_device *ndev)
 774 {
 775         struct bdx_priv *priv = ndev->priv;
 776
 777         u32 rxf_val =
 778             GMAC_RX_FILTER_AM | GMAC_RX_FILTER_AB | GMAC_RX_FILTER_OSEN;
 779         int i;
 780
 781         ENTER;
 782         /* IMF - imperfect (hash) rx multicat filter */
 783         /* PMF - perfect rx multicat filter */
 784
 785         /* FIXME: RXE(OFF) */
 786         if (ndev->flags & IFF_PROMISC) {
 787                 rxf_val |= GMAC_RX_FILTER_PRM;
 788         } else if (ndev->flags & IFF_ALLMULTI) {
 789                 /* set IMF to accept all multicast frmaes */
 790                 for (i = 0; i < MAC_MCST_HASH_NUM; i++)
 791                         WRITE_REG(priv, regRX_MCST_HASH0 + i * 4, ~0);
 792         } else if (ndev->mc_count) {
 793                 u8 hash;
 794                 struct dev_mc_list *mclist;
 795                 u32 reg, val;
 796
 797                 /* set IMF to deny all multicast frames */
 798                 for (i = 0; i < MAC_MCST_HASH_NUM; i++)
 799                         WRITE_REG(priv, regRX_MCST_HASH0 + i * 4, 0);
 800                 /* set PMF to deny all multicast frames */
 801                 for (i = 0; i < MAC_MCST_NUM; i++) {
 802                         WRITE_REG(priv, regRX_MAC_MCST0 + i * 8, 0);
 803                         WRITE_REG(priv, regRX_MAC_MCST1 + i * 8, 0);
 804                 }
 805
 806                 /* use PMF to accept first MAC_MCST_NUM (15) addresses */
 807                 /* TBD: sort addreses and write them in ascending order
 808                  * into RX_MAC_MCST regs. we skip this phase now and accept ALL
 809                  * multicast frames throu IMF */
 810                 mclist = ndev->mc_list;
 811
 812                 /* accept the rest of addresses throu IMF */
 813                 for (; mclist; mclist = mclist->next) {
 814                         hash = 0;
 815                         for (i = 0; i < ETH_ALEN; i++)
 816                                 hash ^= mclist->dmi_addr[i];
 817                         reg = regRX_MCST_HASH0 + ((hash >> 5) << 2);
 818                         val = READ_REG(priv, reg);
 819                         val |= (1 << (hash % 32));
 820                         WRITE_REG(priv, reg, val);
 821                 }
 822
 823         } else {
 824                 DBG("only own mac %d\n", ndev->mc_count);
 825                 rxf_val |= GMAC_RX_FILTER_AB;
 826         }
 827         WRITE_REG(priv, regGMAC_RXF_A, rxf_val);
 828         /* enable RX */
 829         /* FIXME: RXE(ON) */
 830         RET();
 831 }
 832
 833 static int bdx_set_mac(struct net_device *ndev, void *p)
 834 {
 835         struct bdx_priv *priv = ndev->priv;
 836         struct sockaddr *addr = p;
 837
 838         ENTER;
 839         /*
 840            if (netif_running(dev))
 841            return -EBUSY
 842          */
 843         memcpy(ndev->dev_addr, addr->sa_data, ndev->addr_len);
 844         bdx_restore_mac(ndev, priv);
 845         RET(0);
 846 }
 847
 848 static int bdx_read_mac(struct bdx_priv *priv)
 849 {
 850         u16 macAddress[3], i;
 851         ENTER;
 852
 853         macAddress[2] = READ_REG(priv, regUNC_MAC0_A);
 854         macAddress[2] = READ_REG(priv, regUNC_MAC0_A);
 855         macAddress[1] = READ_REG(priv, regUNC_MAC1_A);
 856         macAddress[1] = READ_REG(priv, regUNC_MAC1_A);
 857         macAddress[0] = READ_REG(priv, regUNC_MAC2_A);
 858         macAddress[0] = READ_REG(priv, regUNC_MAC2_A);
 859         for (i = 0; i < 3; i++) {
 860                 priv->ndev->dev_addr[i * 2 + 1] = macAddress[i];
 861                 priv->ndev->dev_addr[i * 2] = macAddress[i] >> 8;
 862         }
 863         RET(0);
 864 }
 865
 866 static u64 bdx_read_l2stat(struct bdx_priv *priv, int reg)
 867 {
 868         u64 val;
 869
 870         val = READ_REG(priv, reg);
 871         val |= ((u64) READ_REG(priv, reg + 8)) << 32;
 872         return val;
 873 }
 874
 875 /*Do the statistics-update work*/
 876 static void bdx_update_stats(struct bdx_priv *priv)
 877 {
 878         struct bdx_stats *stats = &priv->hw_stats;
 879         u64 *stats_vector = (u64 *) stats;
 880         int i;
 881         int addr;
 882
 883         /*Fill HW structure */
 884         addr = 0x7200;
 885         /*First 12 statistics - 0x7200 - 0x72B0 */
 886         for (i = 0; i < 12; i++) {
 887                 stats_vector[i] = bdx_read_l2stat(priv, addr);
 888                 addr += 0x10;
 889         }
 890         BDX_ASSERT(addr != 0x72C0);
 891         /* 0x72C0-0x72E0 RSRV */
 892         addr = 0x72F0;
 893         for (; i < 16; i++) {
 894                 stats_vector[i] = bdx_read_l2stat(priv, addr);
 895                 addr += 0x10;
 896         }
 897         BDX_ASSERT(addr != 0x7330);
 898         /* 0x7330-0x7360 RSRV */
 899         addr = 0x7370;
 900         for (; i < 19; i++) {
 901                 stats_vector[i] = bdx_read_l2stat(priv, addr);
 902                 addr += 0x10;
 903         }
 904         BDX_ASSERT(addr != 0x73A0);
 905         /* 0x73A0-0x73B0 RSRV */
 906         addr = 0x73C0;
 907         for (; i < 23; i++) {
 908                 stats_vector[i] = bdx_read_l2stat(priv, addr);
 909                 addr += 0x10;
 910         }
 911         BDX_ASSERT(addr != 0x7400);
 912         BDX_ASSERT((sizeof(struct bdx_stats) / sizeof(u64)) != i);
 913 }
 914
 915 static struct net_device_stats *bdx_get_stats(struct net_device *ndev)
 916 {
 917         struct bdx_priv *priv = ndev->priv;
 918         struct net_device_stats *net_stat = &priv->net_stats;
 919         return net_stat;
 920 }
 921
 922 static void print_rxdd(struct rxd_desc *rxdd, u32 rxd_val1, u16 len,
 923                        u16 rxd_vlan);
 924 static void print_rxfd(struct rxf_desc *rxfd);
 925
 926 /*************************************************************************
 927  *     Rx DB                                                             *
 928  *************************************************************************/
 929
 930 static void bdx_rxdb_destroy(struct rxdb *db)
 931 {
 932         if (db)
 933                 vfree(db);
 934 }
 935
 936 static struct rxdb *bdx_rxdb_create(int nelem)
 937 {
 938         struct rxdb *db;
 939         int i;
 940
 941         db = vmalloc(sizeof(struct rxdb)
 942                      + (nelem * sizeof(int))
 943                      + (nelem * sizeof(struct rx_map)));
 944         if (likely(db != NULL)) {
 945                 db->stack = (int *)(db + 1);
 946                 db->elems = (void *)(db->stack + nelem);
 947                 db->nelem = nelem;
 948                 db->top = nelem;
 949                 for (i = 0; i < nelem; i++)
 950                         db->stack[i] = nelem - i - 1;   /* to make first allocs
 951                                                            close to db struct*/
 952         }
 953
 954         return db;
 955 }
 956
 957 static inline int bdx_rxdb_alloc_elem(struct rxdb *db)
 958 {
 959         BDX_ASSERT(db->top <= 0);
 960         return db->stack[--(db->top)];
 961 }
 962
 963 static inline void *bdx_rxdb_addr_elem(struct rxdb *db, int n)
 964 {
 965         BDX_ASSERT((n < 0) || (n >= db->nelem));
 966         return db->elems + n;
 967 }
 968
 969 static inline int bdx_rxdb_available(struct rxdb *db)
 970 {
 971         return db->top;
 972 }
 973
 974 static inline void bdx_rxdb_free_elem(struct rxdb *db, int n)
 975 {
 976         BDX_ASSERT((n >= db->nelem) || (n < 0));
 977         db->stack[(db->top)++] = n;
 978 }
 979
 980 /*************************************************************************
 981  *     Rx Init                                                           *
 982  *************************************************************************/
 983
 984 /* bdx_rx_init - initialize RX all related HW and SW resources
 985  * @priv - NIC private structure
 986  *
 987  * Returns 0 on success, negative value on failure
 988  *
 989  * It creates rxf and rxd fifos, update relevant HW registers, preallocate
 990  * skb for rx. It assumes that Rx is desabled in HW
 991  * funcs are grouped for better cache usage
 992  *
 993  * RxD fifo is smaller then RxF fifo by design. Upon high load, RxD will be
 994  * filled and packets will be dropped by nic without getting into host or
 995  * cousing interrupt. Anyway, in that condition, host has no chance to proccess
 996  * all packets, but dropping in nic is cheaper, since it takes 0 cpu cycles
 997  */
 998
 999 /* TBD: ensure proper packet size */
1000
1001 static int bdx_rx_init(struct bdx_priv *priv)
1002 {
1003         ENTER;
1004
1005         if (bdx_fifo_init(priv, &priv->rxd_fifo0.m, priv->rxd_size,
1006                           regRXD_CFG0_0, regRXD_CFG1_0,
1007                           regRXD_RPTR_0, regRXD_WPTR_0))
1008                 goto err_mem;
1009         if (bdx_fifo_init(priv, &priv->rxf_fifo0.m, priv->rxf_size,
1010                           regRXF_CFG0_0, regRXF_CFG1_0,
1011                           regRXF_RPTR_0, regRXF_WPTR_0))
1012                 goto err_mem;
1013         if (!
1014             (priv->rxdb =
1015              bdx_rxdb_create(priv->rxf_fifo0.m.memsz /
1016                              sizeof(struct rxf_desc))))
1017                 goto err_mem;
1018
1019         priv->rxf_fifo0.m.pktsz = priv->ndev->mtu + VLAN_ETH_HLEN;
1020         return 0;
1021
1022 err_mem:
1023         ERR("%s: %s: Rx init failed\n", BDX_DRV_NAME, priv->ndev->name);
1024         return -ENOMEM;
1025 }
1026
1027 /* bdx_rx_free_skbs - frees and unmaps all skbs allocated for the fifo
1028  * @priv - NIC private structure
1029  * @f - RXF fifo
1030  */
1031 static void bdx_rx_free_skbs(struct bdx_priv *priv, struct rxf_fifo *f)
1032 {
1033         struct rx_map *dm;
1034         struct rxdb *db = priv->rxdb;
1035         u16 i;
1036
1037         ENTER;
1038         DBG("total=%d free=%d busy=%d\n", db->nelem, bdx_rxdb_available(db),
1039             db->nelem - bdx_rxdb_available(db));
1040         while (bdx_rxdb_available(db) > 0) {
1041                 i = bdx_rxdb_alloc_elem(db);
1042                 dm = bdx_rxdb_addr_elem(db, i);
1043                 dm->dma = 0;
1044         }
1045         for (i = 0; i < db->nelem; i++) {
1046                 dm = bdx_rxdb_addr_elem(db, i);
1047                 if (dm->dma) {
1048                         pci_unmap_single(priv->pdev,
1049                                          dm->dma, f->m.pktsz,
1050                                          PCI_DMA_FROMDEVICE);
1051                         dev_kfree_skb(dm->skb);
1052                 }
1053         }
1054 }
1055
1056 /* bdx_rx_free - release all Rx resources
1057  * @priv - NIC private structure
1058  * It assumes that Rx is desabled in HW
1059  */
1060 static void bdx_rx_free(struct bdx_priv *priv)
1061 {
1062         ENTER;
1063         if (priv->rxdb) {
1064                 bdx_rx_free_skbs(priv, &priv->rxf_fifo0);
1065                 bdx_rxdb_destroy(priv->rxdb);
1066                 priv->rxdb = NULL;
1067         }
1068         bdx_fifo_free(priv, &priv->rxf_fifo0.m);
1069         bdx_fifo_free(priv, &priv->rxd_fifo0.m);
1070
1071         RET();
1072 }
1073
1074 /*************************************************************************
1075  *     Rx Engine                                                         *
1076  *************************************************************************/
1077
1078 /* bdx_rx_alloc_skbs - fill rxf fifo with new skbs
1079  * @priv - nic's private structure
1080  * @f - RXF fifo that needs skbs
1081  * It allocates skbs, build rxf descs and push it (rxf descr) into rxf fifo.
1082  * skb's virtual and physical addresses are stored in skb db.
1083  * To calculate free space, func uses cached values of RPTR and WPTR
1084  * When needed, it also updates RPTR and WPTR.
1085  */
1086
1087 /* TBD: do not update WPTR if no desc were written */
1088
1089 static void bdx_rx_alloc_skbs(struct bdx_priv *priv, struct rxf_fifo *f)
1090 {
1091         struct sk_buff *skb;
1092         struct rxf_desc *rxfd;
1093         struct rx_map *dm;
1094         int dno, delta, idx;
1095         struct rxdb *db = priv->rxdb;
1096
1097         ENTER;
1098         dno = bdx_rxdb_available(db) - 1;
1099         while (dno > 0) {
1100                 if (!(skb = dev_alloc_skb(f->m.pktsz + NET_IP_ALIGN))) {
1101                         ERR("NO MEM: dev_alloc_skb failed\n");
1102                         break;
1103                 }
1104                 skb->dev = priv->ndev;
1105                 skb_reserve(skb, NET_IP_ALIGN);
1106
1107                 idx = bdx_rxdb_alloc_elem(db);
1108                 dm = bdx_rxdb_addr_elem(db, idx);
1109                 dm->dma = pci_map_single(priv->pdev,
1110                                          skb->data, f->m.pktsz,
1111                                          PCI_DMA_FROMDEVICE);
1112                 dm->skb = skb;
1113                 rxfd = (struct rxf_desc *)(f->m.va + f->m.wptr);
1114                 rxfd->info = CPU_CHIP_SWAP32(0x10003);  /* INFO=1 BC=3 */
1115                 rxfd->va_lo = idx;
1116                 rxfd->pa_lo = CPU_CHIP_SWAP32(L32_64(dm->dma));
1117                 rxfd->pa_hi = CPU_CHIP_SWAP32(H32_64(dm->dma));
1118                 rxfd->len = CPU_CHIP_SWAP32(f->m.pktsz);
1119                 print_rxfd(rxfd);
1120
1121                 f->m.wptr += sizeof(struct rxf_desc);
1122                 delta = f->m.wptr - f->m.memsz;
1123                 if (unlikely(delta >= 0)) {
1124                         f->m.wptr = delta;
1125                         if (delta > 0) {
1126                                 memcpy(f->m.va, f->m.va + f->m.memsz, delta);
1127                                 DBG("wrapped descriptor\n");
1128                         }
1129                 }
1130                 dno--;
1131         }
1132         /*TBD: to do - delayed rxf wptr like in txd */
1133         WRITE_REG(priv, f->m.reg_WPTR, f->m.wptr & TXF_WPTR_WR_PTR);
1134         RET();
1135 }
1136
1137 static inline void
1138 NETIF_RX_MUX(struct bdx_priv *priv, u32 rxd_val1, u16 rxd_vlan,
1139              struct sk_buff *skb)
1140 {
1141         ENTER;
1142         DBG("rxdd->flags.bits.vtag=%d vlgrp=%p\n", GET_RXD_VTAG(rxd_val1),
1143             priv->vlgrp);
1144         if (priv->vlgrp && GET_RXD_VTAG(rxd_val1)) {
1145                 DBG("%s: vlan rcv vlan '%x' vtag '%x', device name '%s'\n",
1146                     priv->ndev->name,
1147                     GET_RXD_VLAN_ID(rxd_vlan),
1148                     GET_RXD_VTAG(rxd_val1),
1149                     vlan_group_get_device(priv->vlgrp,
1150                                           GET_RXD_VLAN_ID(rxd_vlan))->name);
1151                 /* NAPI variant of receive functions */
1152                 vlan_hwaccel_receive_skb(skb, priv->vlgrp,
1153                                          GET_RXD_VLAN_ID(rxd_vlan));
1154         } else {
1155                 netif_receive_skb(skb);
1156         }
1157 }
1158
1159 static void bdx_recycle_skb(struct bdx_priv *priv, struct rxd_desc *rxdd)
1160 {
1161         struct rxf_desc *rxfd;
1162         struct rx_map *dm;
1163         struct rxf_fifo *f;
1164         struct rxdb *db;
1165         struct sk_buff *skb;
1166         int delta;
1167
1168         ENTER;
1169         DBG("priv=%p rxdd=%p\n", priv, rxdd);
1170         f = &priv->rxf_fifo0;
1171         db = priv->rxdb;
1172         DBG("db=%p f=%p\n", db, f);
1173         dm = bdx_rxdb_addr_elem(db, rxdd->va_lo);
1174         DBG("dm=%p\n", dm);
1175         skb = dm->skb;
1176         rxfd = (struct rxf_desc *)(f->m.va + f->m.wptr);
1177         rxfd->info = CPU_CHIP_SWAP32(0x10003);  /* INFO=1 BC=3 */
1178         rxfd->va_lo = rxdd->va_lo;
1179         rxfd->pa_lo = CPU_CHIP_SWAP32(L32_64(dm->dma));
1180         rxfd->pa_hi = CPU_CHIP_SWAP32(H32_64(dm->dma));
1181         rxfd->len = CPU_CHIP_SWAP32(f->m.pktsz);
1182         print_rxfd(rxfd);
1183
1184         f->m.wptr += sizeof(struct rxf_desc);
1185         delta = f->m.wptr - f->m.memsz;
1186         if (unlikely(delta >= 0)) {
1187                 f->m.wptr = delta;
1188                 if (delta > 0) {
1189                         memcpy(f->m.va, f->m.va + f->m.memsz, delta);
1190                         DBG("wrapped descriptor\n");
1191                 }
1192         }
1193         RET();
1194 }
1195
1196 /* bdx_rx_receive - recieves full packets from RXD fifo and pass them to OS
1197  * NOTE: a special treatment is given to non-continous descriptors
1198  * that start near the end, wraps around and continue at the beginning. a second
1199  * part is copied right after the first, and then descriptor is interpreted as
1200  * normal. fifo has an extra space to allow such operations
1201  * @priv - nic's private structure
1202  * @f - RXF fifo that needs skbs
1203  */
1204
1205 /* TBD: replace memcpy func call by explicite inline asm */
1206
1207 static int bdx_rx_receive(struct bdx_priv *priv, struct rxd_fifo *f, int budget)
1208 {
1209         struct sk_buff *skb, *skb2;
1210         struct rxd_desc *rxdd;
1211         struct rx_map *dm;
1212         struct rxf_fifo *rxf_fifo;
1213         int tmp_len, size;
1214         int done = 0;
1215         int max_done = BDX_MAX_RX_DONE;
1216         struct rxdb *db = NULL;
1217         /* Unmarshalled descriptor - copy of descriptor in host order */
1218         u32 rxd_val1;
1219         u16 len;
1220         u16 rxd_vlan;
1221
1222         ENTER;
1223         max_done = budget;
1224
1225         priv->ndev->last_rx = jiffies;
1226         f->m.wptr = READ_REG(priv, f->m.reg_WPTR) & TXF_WPTR_WR_PTR;
1227
1228         size = f->m.wptr - f->m.rptr;
1229         if (size < 0)
1230                 size = f->m.memsz + size;       /* size is negative :-) */
1231
1232         while (size > 0) {
1233
1234                 rxdd = (struct rxd_desc *)(f->m.va + f->m.rptr);
1235                 rxd_val1 = CPU_CHIP_SWAP32(rxdd->rxd_val1);
1236
1237                 len = CPU_CHIP_SWAP16(rxdd->len);
1238
1239                 rxd_vlan = CPU_CHIP_SWAP16(rxdd->rxd_vlan);
1240
1241                 print_rxdd(rxdd, rxd_val1, len, rxd_vlan);
1242
1243                 tmp_len = GET_RXD_BC(rxd_val1) << 3;
1244                 BDX_ASSERT(tmp_len <= 0);
1245                 size -= tmp_len;
1246                 if (size < 0)   /* test for partially arrived descriptor */
1247                         break;
1248
1249                 f->m.rptr += tmp_len;
1250
1251                 tmp_len = f->m.rptr - f->m.memsz;
1252                 if (unlikely(tmp_len >= 0)) {
1253                         f->m.rptr = tmp_len;
1254                         if (tmp_len > 0) {
1255                                 DBG("wrapped desc rptr=%d tmp_len=%d\n",
1256                                     f->m.rptr, tmp_len);
1257                                 memcpy(f->m.va + f->m.memsz, f->m.va, tmp_len);
1258                         }
1259                 }
1260
1261                 if (unlikely(GET_RXD_ERR(rxd_val1))) {
1262                         DBG("rxd_err = 0x%x\n", GET_RXD_ERR(rxd_val1));
1263                         priv->net_stats.rx_errors++;
1264                         bdx_recycle_skb(priv, rxdd);
1265                         continue;
1266                 }
1267
1268                 rxf_fifo = &priv->rxf_fifo0;
1269                 db = priv->rxdb;
1270                 dm = bdx_rxdb_addr_elem(db, rxdd->va_lo);
1271                 skb = dm->skb;
1272
1273                 if (len < BDX_COPYBREAK &&
1274                     (skb2 = dev_alloc_skb(len + NET_IP_ALIGN))) {
1275                         skb_reserve(skb2, NET_IP_ALIGN);
1276                         /*skb_put(skb2, len); */
1277                         pci_dma_sync_single_for_cpu(priv->pdev,
1278                                                     dm->dma, rxf_fifo->m.pktsz,
1279                                                     PCI_DMA_FROMDEVICE);
1280                         memcpy(skb2->data, skb->data, len);
1281                         bdx_recycle_skb(priv, rxdd);
1282                         skb = skb2;
1283                 } else {
1284                         pci_unmap_single(priv->pdev,
1285                                          dm->dma, rxf_fifo->m.pktsz,
1286                                          PCI_DMA_FROMDEVICE);
1287                         bdx_rxdb_free_elem(db, rxdd->va_lo);
1288                 }
1289
1290                 priv->net_stats.rx_bytes += len;
1291
1292                 skb_put(skb, len);
1293                 skb->dev = priv->ndev;
1294                 skb->ip_summed = CHECKSUM_UNNECESSARY;
1295                 skb->protocol = eth_type_trans(skb, priv->ndev);
1296
1297                 /* Non-IP packets aren't checksum-offloaded */
1298                 if (GET_RXD_PKT_ID(rxd_val1) == 0)
1299                         skb->ip_summed = CHECKSUM_NONE;
1300
1301                 NETIF_RX_MUX(priv, rxd_val1, rxd_vlan, skb);
1302
1303                 if (++done >= max_done)
1304                         break;
1305         }
1306
1307         priv->net_stats.rx_packets += done;
1308
1309         /* FIXME: do smth to minimize pci accesses    */
1310         WRITE_REG(priv, f->m.reg_RPTR, f->m.rptr & TXF_WPTR_WR_PTR);
1311
1312         bdx_rx_alloc_skbs(priv, &priv->rxf_fifo0);
1313
1314         RET(done);
1315 }
1316
1317 /*************************************************************************
1318  * Debug / Temprorary Code                                               *
1319  *************************************************************************/
1320 static void print_rxdd(struct rxd_desc *rxdd, u32 rxd_val1, u16 len,
1321                        u16 rxd_vlan)
1322 {
1323         DBG("ERROR: rxdd bc %d rxfq %d to %d type %d err %d rxp %d "
1324             "pkt_id %d vtag %d len %d vlan_id %d cfi %d prio %d "
1325             "va_lo %d va_hi %d\n",
1326             GET_RXD_BC(rxd_val1), GET_RXD_RXFQ(rxd_val1), GET_RXD_TO(rxd_val1),
1327             GET_RXD_TYPE(rxd_val1), GET_RXD_ERR(rxd_val1),
1328             GET_RXD_RXP(rxd_val1), GET_RXD_PKT_ID(rxd_val1),
1329             GET_RXD_VTAG(rxd_val1), len, GET_RXD_VLAN_ID(rxd_vlan),
1330             GET_RXD_CFI(rxd_vlan), GET_RXD_PRIO(rxd_vlan), rxdd->va_lo,
1331             rxdd->va_hi);
1332 }
1333
1334 static void print_rxfd(struct rxf_desc *rxfd)
1335 {
1336         DBG("=== RxF desc CHIP ORDER/ENDIANESS =============\n"
1337             "info 0x%x va_lo %u pa_lo 0x%x pa_hi 0x%x len 0x%x\n",
1338             rxfd->info, rxfd->va_lo, rxfd->pa_lo, rxfd->pa_hi, rxfd->len);
1339 }
1340
1341 /*
1342  * TX HW/SW interaction overview
1343  * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1344  * There are 2 types of TX communication channels betwean driver and NIC.
1345  * 1) TX Free Fifo - TXF - holds ack descriptors for sent packets
1346  * 2) TX Data Fifo - TXD - holds descriptors of full buffers.
1347  *
1348  * Currently NIC supports TSO, checksuming and gather DMA
1349  * UFO and IP fragmentation is on the way
1350  *
1351  * RX SW Data Structures
1352  * ~~~~~~~~~~~~~~~~~~~~~
1353  * txdb - used to keep track of all skbs owned by SW and their dma addresses.
1354  * For TX case, ownership lasts from geting packet via hard_xmit and until HW
1355  * acknowledges sent by TXF descriptors.
1356  * Implemented as cyclic buffer.
1357  * fifo - keeps info about fifo's size and location, relevant HW registers,
1358  * usage and skb db. Each RXD and RXF Fifo has its own fifo structure.
1359  * Implemented as simple struct.
1360  *
1361  * TX SW Execution Flow
1362  * ~~~~~~~~~~~~~~~~~~~~
1363  * OS calls driver's hard_xmit method with packet to sent.
1364  * Driver creates DMA mappings, builds TXD descriptors and kicks HW
1365  * by updating TXD WPTR.
1366  * When packet is sent, HW write us TXF descriptor and SW frees original skb.
1367  * To prevent TXD fifo overflow without reading HW registers every time,
1368  * SW deploys "tx level" technique.
1369  * Upon strart up, tx level is initialized to TXD fifo length.
1370  * For every sent packet, SW gets its TXD descriptor sizei
1371  * (from precalculated array) and substructs it from tx level.
1372  * The size is also stored in txdb. When TXF ack arrives, SW fetch size of
1373  * original TXD descriptor from txdb and adds it to tx level.
1374  * When Tx level drops under some predefined treshhold, the driver
1375  * stops the TX queue. When TX level rises above that level,
1376  * the tx queue is enabled again.
1377  *
1378  * This technique avoids eccessive reading of RPTR and WPTR registers.
1379  * As our benchmarks shows, it adds 1.5 Gbit/sec to NIS's throuput.
1380  */
1381
1382 /*************************************************************************
1383  *     Tx DB                                                             *
1384  *************************************************************************/
1385 static inline int bdx_tx_db_size(struct txdb *db)
1386 {
1387         int taken = db->wptr - db->rptr;
1388         if (taken < 0)
1389                 taken = db->size + 1 + taken;   /* (size + 1) equals memsz */
1390
1391         return db->size - taken;
1392 }
1393
1394 /* __bdx_tx_ptr_next - helper function, increment read/write pointer + wrap
1395  * @d   - tx data base
1396  * @ptr - read or write pointer
1397  */
1398 static inline void __bdx_tx_db_ptr_next(struct txdb *db, struct tx_map **pptr)
1399 {
1400         BDX_ASSERT(db == NULL || pptr == NULL); /* sanity */
1401
1402         BDX_ASSERT(*pptr != db->rptr && /* expect either read */
1403                    *pptr != db->wptr);  /* or write pointer */
1404
1405         BDX_ASSERT(*pptr < db->start || /* pointer has to be */
1406                    *pptr >= db->end);   /* in range */
1407
1408         ++*pptr;
1409         if (unlikely(*pptr == db->end))
1410                 *pptr = db->start;
1411 }
1412
1413 /* bdx_tx_db_inc_rptr - increment read pointer
1414  * @d   - tx data base
1415  */
1416 static inline void bdx_tx_db_inc_rptr(struct txdb *db)
1417 {
1418         BDX_ASSERT(db->rptr == db->wptr);       /* can't read from empty db */
1419         __bdx_tx_db_ptr_next(db, &db->rptr);
1420 }
1421
1422 /* bdx_tx_db_inc_rptr - increment write pointer
1423  * @d   - tx data base
1424  */
1425 static inline void bdx_tx_db_inc_wptr(struct txdb *db)
1426 {
1427         __bdx_tx_db_ptr_next(db, &db->wptr);
1428         BDX_ASSERT(db->rptr == db->wptr);       /* we can not get empty db as
1429                                                    a result of write */
1430 }
1431
1432 /* bdx_tx_db_init - creates and initializes tx db
1433  * @d       - tx data base
1434  * @sz_type - size of tx fifo
1435  * Returns 0 on success, error code otherwise
1436  */
1437 static int bdx_tx_db_init(struct txdb *d, int sz_type)
1438 {
1439         int memsz = FIFO_SIZE * (1 << (sz_type + 1));
1440
1441         d->start = vmalloc(memsz);
1442         if (!d->start)
1443                 return -ENOMEM;
1444
1445         /*
1446          * In order to differentiate between db is empty and db is full
1447          * states at least one element should always be empty in order to
1448          * avoid rptr == wptr which means db is empty
1449          */
1450         d->size = memsz / sizeof(struct tx_map) - 1;
1451         d->end = d->start + d->size + 1;        /* just after last element */
1452
1453         /* all dbs are created equally empty */
1454         d->rptr = d->start;
1455         d->wptr = d->start;
1456
1457         return 0;
1458 }
1459
1460 /* bdx_tx_db_close - closes tx db and frees all memory
1461  * @d - tx data base
1462  */
1463 static void bdx_tx_db_close(struct txdb *d)
1464 {
1465         BDX_ASSERT(d == NULL);
1466
1467         if (d->start) {
1468                 vfree(d->start);
1469                 d->start = NULL;
1470         }
1471 }
1472
1473 /*************************************************************************
1474  *     Tx Engine                                                         *
1475  *************************************************************************/
1476
1477 /* sizes of tx desc (including padding if needed) as function
1478  * of skb's frag number */
1479 static struct {
1480         u16 bytes;
1481         u16 qwords;             /* qword = 64 bit */
1482 } txd_sizes[MAX_SKB_FRAGS + 1];
1483
1484 /* txdb_map_skb - creates and stores dma mappings for skb's data blocks
1485  * @priv - NIC private structure
1486  * @skb  - socket buffer to map
1487  *
1488  * It makes dma mappings for skb's data blocks and writes them to PBL of
1489  * new tx descriptor. It also stores them in the tx db, so they could be
1490  * unmaped after data was sent. It is reponsibility of a caller to make
1491  * sure that there is enough space in the tx db. Last element holds pointer
1492  * to skb itself and marked with zero length
1493  */
1494 static inline void
1495 bdx_tx_map_skb(struct bdx_priv *priv, struct sk_buff *skb,
1496                struct txd_desc *txdd)
1497 {
1498         struct txdb *db = &priv->txdb;
1499         struct pbl *pbl = &txdd->pbl[0];
1500         int nr_frags = skb_shinfo(skb)->nr_frags;
1501         int i;
1502
1503         db->wptr->len = skb->len - skb->data_len;
1504         db->wptr->addr.dma = pci_map_single(priv->pdev, skb->data,
1505                                             db->wptr->len, PCI_DMA_TODEVICE);
1506         pbl->len = CPU_CHIP_SWAP32(db->wptr->len);
1507         pbl->pa_lo = CPU_CHIP_SWAP32(L32_64(db->wptr->addr.dma));
1508         pbl->pa_hi = CPU_CHIP_SWAP32(H32_64(db->wptr->addr.dma));
1509         DBG("=== pbl   len: 0x%x ================\n", pbl->len);
1510         DBG("=== pbl pa_lo: 0x%x ================\n", pbl->pa_lo);
1511         DBG("=== pbl pa_hi: 0x%x ================\n", pbl->pa_hi);
1512         bdx_tx_db_inc_wptr(db);
1513
1514         for (i = 0; i < nr_frags; i++) {
1515                 struct skb_frag_struct *frag;
1516
1517                 frag = &skb_shinfo(skb)->frags[i];
1518                 db->wptr->len = frag->size;
1519                 db->wptr->addr.dma =
1520                     pci_map_page(priv->pdev, frag->page, frag->page_offset,
1521                                  frag->size, PCI_DMA_TODEVICE);
1522
1523                 pbl++;
1524                 pbl->len = CPU_CHIP_SWAP32(db->wptr->len);
1525                 pbl->pa_lo = CPU_CHIP_SWAP32(L32_64(db->wptr->addr.dma));
1526                 pbl->pa_hi = CPU_CHIP_SWAP32(H32_64(db->wptr->addr.dma));
1527                 bdx_tx_db_inc_wptr(db);
1528         }
1529
1530         /* add skb clean up info. */
1531         db->wptr->len = -txd_sizes[nr_frags].bytes;
1532         db->wptr->addr.skb = skb;
1533         bdx_tx_db_inc_wptr(db);
1534 }
1535
1536 /* init_txd_sizes - precalculate sizes of descriptors for skbs up to 16 frags
1537  * number of frags is used as index to fetch correct descriptors size,
1538  * instead of calculating it each time */
1539 static void __init init_txd_sizes(void)
1540 {
1541         int i, lwords;
1542
1543         /* 7 - is number of lwords in txd with one phys buffer
1544          * 3 - is number of lwords used for every additional phys buffer */
1545         for (i = 0; i < MAX_SKB_FRAGS + 1; i++) {
1546                 lwords = 7 + (i * 3);
1547                 if (lwords & 1)
1548                         lwords++;       /* pad it with 1 lword */
1549                 txd_sizes[i].qwords = lwords >> 1;
1550                 txd_sizes[i].bytes = lwords << 2;
1551         }
1552 }
1553
1554 /* bdx_tx_init - initialize all Tx related stuff.
1555  * Namely, TXD and TXF fifos, database etc */
1556 static int bdx_tx_init(struct bdx_priv *priv)
1557 {
1558         if (bdx_fifo_init(priv, &priv->txd_fifo0.m, priv->txd_size,
1559                           regTXD_CFG0_0,
1560                           regTXD_CFG1_0, regTXD_RPTR_0, regTXD_WPTR_0))
1561                 goto err_mem;
1562         if (bdx_fifo_init(priv, &priv->txf_fifo0.m, priv->txf_size,
1563                           regTXF_CFG0_0,
1564                           regTXF_CFG1_0, regTXF_RPTR_0, regTXF_WPTR_0))
1565                 goto err_mem;
1566
1567         /* The TX db has to keep mappings for all packets sent (on TxD)
1568          * and not yet reclaimed (on TxF) */
1569         if (bdx_tx_db_init(&priv->txdb, max(priv->txd_size, priv->txf_size)))
1570                 goto err_mem;
1571
1572         priv->tx_level = BDX_MAX_TX_LEVEL;
1573 #ifdef BDX_DELAY_WPTR
1574         priv->tx_update_mark = priv->tx_level - 1024;
1575 #endif
1576         return 0;
1577
1578 err_mem:
1579         ERR("tehuti: %s: Tx init failed\n", priv->ndev->name);
1580         return -ENOMEM;
1581 }
1582
1583 /*
1584  * bdx_tx_space - calculates avalable space in TX fifo
1585  * @priv - NIC private structure
1586  * Returns avaliable space in TX fifo in bytes
1587  */
1588 static inline int bdx_tx_space(struct bdx_priv *priv)
1589 {
1590         struct txd_fifo *f = &priv->txd_fifo0;
1591         int fsize;
1592
1593         f->m.rptr = READ_REG(priv, f->m.reg_RPTR) & TXF_WPTR_WR_PTR;
1594         fsize = f->m.rptr - f->m.wptr;
1595         if (fsize <= 0)
1596                 fsize = f->m.memsz + fsize;
1597         return (fsize);
1598 }
1599
1600 /* bdx_tx_transmit - send packet to NIC
1601  * @skb - packet to send
1602  * ndev - network device assigned to NIC
1603  * Return codes:
1604  * o NETDEV_TX_OK everything ok.
1605  * o NETDEV_TX_BUSY Cannot transmit packet, try later
1606  *   Usually a bug, means queue start/stop flow control is broken in
1607  *   the driver. Note: the driver must NOT put the skb in its DMA ring.
1608  * o NETDEV_TX_LOCKED Locking failed, please retry quickly.
1609  */
1610 static int bdx_tx_transmit(struct sk_buff *skb, struct net_device *ndev)
1611 {
1612         struct bdx_priv *priv = ndev->priv;
1613         struct txd_fifo *f = &priv->txd_fifo0;
1614         int txd_checksum = 7;   /* full checksum */
1615         int txd_lgsnd = 0;
1616         int txd_vlan_id = 0;
1617         int txd_vtag = 0;
1618         int txd_mss = 0;
1619
1620         int nr_frags = skb_shinfo(skb)->nr_frags;
1621         struct txd_desc *txdd;
1622         int len;
1623         unsigned long flags;
1624
1625         ENTER;
1626         local_irq_save(flags);
1627         if (!spin_trylock(&priv->tx_lock)) {
1628                 local_irq_restore(flags);
1629                 DBG("%s[%s]: TX locked, returning NETDEV_TX_LOCKED\n",
1630                     BDX_DRV_NAME, ndev->name);
1631                 return NETDEV_TX_LOCKED;
1632         }
1633
1634         /* build tx descriptor */
1635         BDX_ASSERT(f->m.wptr >= f->m.memsz);    /* started with valid wptr */
1636         txdd = (struct txd_desc *)(f->m.va + f->m.wptr);
1637         if (unlikely(skb->ip_summed != CHECKSUM_PARTIAL))
1638                 txd_checksum = 0;
1639
1640         if (skb_shinfo(skb)->gso_size) {
1641                 txd_mss = skb_shinfo(skb)->gso_size;
1642                 txd_lgsnd = 1;
1643                 DBG("skb %p skb len %d gso size = %d\n", skb, skb->len,
1644                     txd_mss);
1645         }
1646
1647         if (vlan_tx_tag_present(skb)) {
1648                 /*Cut VLAN ID to 12 bits */
1649                 txd_vlan_id = vlan_tx_tag_get(skb) & BITS_MASK(12);
1650                 txd_vtag = 1;
1651         }
1652
1653         txdd->length = CPU_CHIP_SWAP16(skb->len);
1654         txdd->mss = CPU_CHIP_SWAP16(txd_mss);
1655         txdd->txd_val1 =
1656             CPU_CHIP_SWAP32(TXD_W1_VAL
1657                             (txd_sizes[nr_frags].qwords, txd_checksum, txd_vtag,
1658                              txd_lgsnd, txd_vlan_id));
1659         DBG("=== TxD desc =====================\n");
1660         DBG("=== w1: 0x%x ================\n", txdd->txd_val1);
1661         DBG("=== w2: mss 0x%x len 0x%x\n", txdd->mss, txdd->length);
1662
1663         bdx_tx_map_skb(priv, skb, txdd);
1664
1665         /* increment TXD write pointer. In case of
1666            fifo wrapping copy reminder of the descriptor
1667            to the beginning */
1668         f->m.wptr += txd_sizes[nr_frags].bytes;
1669         len = f->m.wptr - f->m.memsz;
1670         if (unlikely(len >= 0)) {
1671                 f->m.wptr = len;
1672                 if (len > 0) {
1673                         BDX_ASSERT(len > f->m.memsz);
1674                         memcpy(f->m.va, f->m.va + f->m.memsz, len);
1675                 }
1676         }
1677         BDX_ASSERT(f->m.wptr >= f->m.memsz);    /* finished with valid wptr */
1678
1679         priv->tx_level -= txd_sizes[nr_frags].bytes;
1680         BDX_ASSERT(priv->tx_level <= 0 || priv->tx_level > BDX_MAX_TX_LEVEL);
1681 #ifdef BDX_DELAY_WPTR
1682         if (priv->tx_level > priv->tx_update_mark) {
1683                 /* Force memory writes to complete before letting h/w
1684                    know there are new descriptors to fetch.
1685                    (might be needed on platforms like IA64)
1686                    wmb(); */
1687                 WRITE_REG(priv, f->m.reg_WPTR, f->m.wptr & TXF_WPTR_WR_PTR);
1688         } else {
1689                 if (priv->tx_noupd++ > BDX_NO_UPD_PACKETS) {
1690                         priv->tx_noupd = 0;
1691                         WRITE_REG(priv, f->m.reg_WPTR,
1692                                   f->m.wptr & TXF_WPTR_WR_PTR);
1693                 }
1694         }
1695 #else
1696         /* Force memory writes to complete before letting h/w
1697            know there are new descriptors to fetch.
1698            (might be needed on platforms like IA64)
1699            wmb(); */
1700         WRITE_REG(priv, f->m.reg_WPTR, f->m.wptr & TXF_WPTR_WR_PTR);
1701
1702 #endif
1703         ndev->trans_start = jiffies;
1704
1705         priv->net_stats.tx_packets++;
1706         priv->net_stats.tx_bytes += skb->len;
1707
1708         if (priv->tx_level < BDX_MIN_TX_LEVEL) {
1709                 DBG("%s: %s: TX Q STOP level %d\n",
1710                     BDX_DRV_NAME, ndev->name, priv->tx_level);
1711                 netif_stop_queue(ndev);
1712         }
1713
1714         spin_unlock_irqrestore(&priv->tx_lock, flags);
1715         return NETDEV_TX_OK;
1716 }
1717
1718 /* bdx_tx_cleanup - clean TXF fifo, run in the context of IRQ.
1719  * @priv - bdx adapter
1720  * It scans TXF fifo for descriptors, frees DMA mappings and reports to OS
1721  * that those packets were sent
1722  */
1723 static void bdx_tx_cleanup(struct bdx_priv *priv)
1724 {
1725         struct txf_fifo *f = &priv->txf_fifo0;
1726         struct txdb *db = &priv->txdb;
1727         int tx_level = 0;
1728
1729         ENTER;
1730         f->m.wptr = READ_REG(priv, f->m.reg_WPTR) & TXF_WPTR_MASK;
1731         BDX_ASSERT(f->m.rptr >= f->m.memsz);    /* started with valid rptr */
1732
1733         while (f->m.wptr != f->m.rptr) {
1734                 f->m.rptr += BDX_TXF_DESC_SZ;
1735                 f->m.rptr &= f->m.size_mask;
1736
1737                 /* unmap all the fragments */
1738                 /* first has to come tx_maps containing dma */
1739                 BDX_ASSERT(db->rptr->len == 0);
1740                 do {
1741                         BDX_ASSERT(db->rptr->addr.dma == 0);
1742                         pci_unmap_page(priv->pdev, db->rptr->addr.dma,
1743                                        db->rptr->len, PCI_DMA_TODEVICE);
1744                         bdx_tx_db_inc_rptr(db);
1745                 } while (db->rptr->len > 0);
1746                 tx_level -= db->rptr->len;      /* '-' koz len is negative */
1747
1748                 /* now should come skb pointer - free it */
1749                 dev_kfree_skb_irq(db->rptr->addr.skb);
1750                 bdx_tx_db_inc_rptr(db);
1751         }
1752
1753         /* let h/w know which TXF descriptors were cleaned */
1754         BDX_ASSERT((f->m.wptr & TXF_WPTR_WR_PTR) >= f->m.memsz);
1755         WRITE_REG(priv, f->m.reg_RPTR, f->m.rptr & TXF_WPTR_WR_PTR);
1756
1757         /* We reclaimed resources, so in case the Q is stopped by xmit callback,
1758          * we resume the transmition and use tx_lock to synchronize with xmit.*/
1759         spin_lock(&priv->tx_lock);
1760         priv->tx_level += tx_level;
1761         BDX_ASSERT(priv->tx_level <= 0 || priv->tx_level > BDX_MAX_TX_LEVEL);
1762 #ifdef BDX_DELAY_WPTR
1763         if (priv->tx_noupd) {
1764                 priv->tx_noupd = 0;
1765                 WRITE_REG(priv, priv->txd_fifo0.m.reg_WPTR,
1766                           priv->txd_fifo0.m.wptr & TXF_WPTR_WR_PTR);
1767         }
1768 #endif
1769
1770         if (unlikely(netif_queue_stopped(priv->ndev)
1771                      && netif_carrier_ok(priv->ndev)
1772                      && (priv->tx_level >= BDX_MIN_TX_LEVEL))) {
1773                 DBG("%s: %s: TX Q WAKE level %d\n",
1774                     BDX_DRV_NAME, priv->ndev->name, priv->tx_level);
1775                 netif_wake_queue(priv->ndev);
1776         }
1777         spin_unlock(&priv->tx_lock);
1778 }
1779
1780 /* bdx_tx_free_skbs - frees all skbs from TXD fifo.
1781  * It gets called when OS stops this dev, eg upon "ifconfig down" or rmmod
1782  */
1783 static void bdx_tx_free_skbs(struct bdx_priv *priv)
1784 {
1785         struct txdb *db = &priv->txdb;
1786
1787         ENTER;
1788         while (db->rptr != db->wptr) {
1789                 if (likely(db->rptr->len))
1790                         pci_unmap_page(priv->pdev, db->rptr->addr.dma,
1791                                        db->rptr->len, PCI_DMA_TODEVICE);
1792                 else
1793                         dev_kfree_skb(db->rptr->addr.skb);
1794                 bdx_tx_db_inc_rptr(db);
1795         }
1796         RET();
1797 }
1798
1799 /* bdx_tx_free - frees all Tx resources */
1800 static void bdx_tx_free(struct bdx_priv *priv)
1801 {
1802         ENTER;
1803         bdx_tx_free_skbs(priv);
1804         bdx_fifo_free(priv, &priv->txd_fifo0.m);
1805         bdx_fifo_free(priv, &priv->txf_fifo0.m);
1806         bdx_tx_db_close(&priv->txdb);
1807 }
1808
1809 /* bdx_tx_push_desc - push descriptor to TxD fifo
1810  * @priv - NIC private structure
1811  * @data - desc's data
1812  * @size - desc's size
1813  *
1814  * Pushes desc to TxD fifo and overlaps it if needed.
1815  * NOTE: this func does not check for available space. this is responsibility
1816  *    of the caller. Neither does it check that data size is smaller then
1817  *    fifo size.
1818  */
1819 static void bdx_tx_push_desc(struct bdx_priv *priv, void *data, int size)
1820 {
1821         struct txd_fifo *f = &priv->txd_fifo0;
1822         int i = f->m.memsz - f->m.wptr;
1823
1824         if (size == 0)
1825                 return;
1826
1827         if (i > size) {
1828                 memcpy(f->m.va + f->m.wptr, data, size);
1829                 f->m.wptr += size;
1830         } else {
1831                 memcpy(f->m.va + f->m.wptr, data, i);
1832                 f->m.wptr = size - i;
1833                 memcpy(f->m.va, data + i, f->m.wptr);
1834         }
1835         WRITE_REG(priv, f->m.reg_WPTR, f->m.wptr & TXF_WPTR_WR_PTR);
1836 }
1837
1838 /* bdx_tx_push_desc_safe - push descriptor to TxD fifo in a safe way
1839  * @priv - NIC private structure
1840  * @data - desc's data
1841  * @size - desc's size
1842  *
1843  * NOTE: this func does check for available space and, if neccessary, waits for
1844  *   NIC to read existing data before writing new one.
1845  */
1846 static void bdx_tx_push_desc_safe(struct bdx_priv *priv, void *data, int size)
1847 {
1848         int timer = 0;
1849         ENTER;
1850
1851         while (size > 0) {
1852                 /* we substruct 8 because when fifo is full rptr == wptr
1853                    which also means that fifo is empty, we can understand
1854                    the difference, but could hw do the same ??? :) */
1855                 int avail = bdx_tx_space(priv) - 8;
1856                 if (avail <= 0) {
1857                         if (timer++ > 300) {    /* prevent endless loop */
1858                                 DBG("timeout while writing desc to TxD fifo\n");
1859                                 break;
1860                         }
1861                         udelay(50);     /* give hw a chance to clean fifo */
1862                         continue;
1863                 }
1864                 avail = MIN(avail, size);
1865                 DBG("about to push  %d bytes starting %p size %d\n", avail,
1866                     data, size);
1867                 bdx_tx_push_desc(priv, data, avail);
1868                 size -= avail;
1869                 data += avail;
1870         }
1871         RET();
1872 }
1873
1874 /**
1875  * bdx_probe - Device Initialization Routine
1876  * @pdev: PCI device information struct
1877  * @ent: entry in bdx_pci_tbl
1878  *
1879  * Returns 0 on success, negative on failure
1880  *
1881  * bdx_probe initializes an adapter identified by a pci_dev structure.
1882  * The OS initialization, configuring of the adapter private structure,
1883  * and a hardware reset occur.
1884  *
1885  * functions and their order used as explained in
1886  * /usr/src/linux/Documentation/DMA-{API,mapping}.txt
1887  *
1888  */
1889
1890 /* TBD: netif_msg should be checked and implemented. I disable it for now */
1891 static int __devinit
1892 bdx_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
1893 {
1894         struct net_device *ndev;
1895         struct bdx_priv *priv;
1896         int err, pci_using_dac, port;
1897         unsigned long pciaddr;
1898         u32 regionSize;
1899         struct pci_nic *nic;
1900
1901         ENTER;
1902
1903         nic = vmalloc(sizeof(*nic));
1904         if (!nic)
1905                 RET(-ENOMEM);
1906
1907     /************** pci *****************/
1908         if ((err = pci_enable_device(pdev)))    /* it trigers interrupt, dunno why. */
1909                 goto err_pci;                   /* it's not a problem though */
1910
1911         if (!(err = pci_set_dma_mask(pdev, DMA_64BIT_MASK)) &&
1912             !(err = pci_set_consistent_dma_mask(pdev, DMA_64BIT_MASK))) {
1913                 pci_using_dac = 1;
1914         } else {
1915                 if ((err = pci_set_dma_mask(pdev, DMA_32BIT_MASK)) ||
1916                     (err = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK))) {
1917                         printk(KERN_ERR "tehuti: No usable DMA configuration"
1918                                         ", aborting\n");
1919                         goto err_dma;
1920                 }
1921                 pci_using_dac = 0;
1922         }
1923
1924         if ((err = pci_request_regions(pdev, BDX_DRV_NAME)))
1925                 goto err_dma;
1926
1927         pci_set_master(pdev);
1928
1929         pciaddr = pci_resource_start(pdev, 0);
1930         if (!pciaddr) {
1931                 err = -EIO;
1932                 ERR("tehuti: no MMIO resource\n");
1933                 goto err_out_res;
1934         }
1935         if ((regionSize = pci_resource_len(pdev, 0)) < BDX_REGS_SIZE) {
1936                 err = -EIO;
1937                 ERR("tehuti: MMIO resource (%x) too small\n", regionSize);
1938                 goto err_out_res;
1939         }
1940
1941         nic->regs = ioremap(pciaddr, regionSize);
1942         if (!nic->regs) {
1943                 err = -EIO;
1944                 ERR("tehuti: ioremap failed\n");
1945                 goto err_out_res;
1946         }
1947
1948         if (pdev->irq < 2) {
1949                 err = -EIO;
1950                 ERR("tehuti: invalid irq (%d)\n", pdev->irq);
1951                 goto err_out_iomap;
1952         }
1953         pci_set_drvdata(pdev, nic);
1954
1955         if (pdev->device == 0x3014)
1956                 nic->port_num = 2;
1957         else
1958                 nic->port_num = 1;
1959
1960         print_hw_id(pdev);
1961
1962         bdx_hw_reset_direct(nic->regs);
1963
1964         nic->irq_type = IRQ_INTX;
1965 #ifdef BDX_MSI
1966         if ((readl(nic->regs + FPGA_VER) & 0xFFF) >= 378) {
1967                 if ((err = pci_enable_msi(pdev)))
1968                         ERR("Tehuti: Can't eneble msi. error is %d\n", err);
1969                 else
1970                         nic->irq_type = IRQ_MSI;
1971         } else
1972                 DBG("HW does not support MSI\n");
1973 #endif
1974
1975     /************** netdev **************/
1976         for (port = 0; port < nic->port_num; port++) {
1977                 if (!(ndev = alloc_etherdev(sizeof(struct bdx_priv)))) {
1978                         err = -ENOMEM;
1979                         printk(KERN_ERR "tehuti: alloc_etherdev failed\n");
1980                         goto err_out_iomap;
1981                 }
1982
1983                 ndev->open = bdx_open;
1984                 ndev->stop = bdx_close;
1985                 ndev->hard_start_xmit = bdx_tx_transmit;
1986                 ndev->do_ioctl = bdx_ioctl;
1987                 ndev->set_multicast_list = bdx_setmulti;
1988                 ndev->get_stats = bdx_get_stats;
1989                 ndev->change_mtu = bdx_change_mtu;
1990                 ndev->set_mac_address = bdx_set_mac;
1991                 ndev->tx_queue_len = BDX_NDEV_TXQ_LEN;
1992                 ndev->vlan_rx_register = bdx_vlan_rx_register;
1993                 ndev->vlan_rx_add_vid = bdx_vlan_rx_add_vid;
1994                 ndev->vlan_rx_kill_vid = bdx_vlan_rx_kill_vid;
1995
1996                 bdx_ethtool_ops(ndev);  /* ethtool interface */
1997
1998                 /* these fields are used for info purposes only
1999                  * so we can have them same for all ports of the board */
2000                 ndev->if_port = port;
2001                 ndev->base_addr = pciaddr;
2002                 ndev->mem_start = pciaddr;
2003                 ndev->mem_end = pciaddr + regionSize;
2004                 ndev->irq = pdev->irq;
2005                 ndev->features = NETIF_F_IP_CSUM | NETIF_F_SG | NETIF_F_TSO
2006                     | NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX |
2007                     NETIF_F_HW_VLAN_FILTER
2008                     /*| NETIF_F_FRAGLIST */
2009                     ;
2010
2011                 if (pci_using_dac)
2012                         ndev->features |= NETIF_F_HIGHDMA;
2013
2014         /************** priv ****************/
2015                 priv = nic->priv[port] = ndev->priv;
2016
2017                 memset(priv, 0, sizeof(struct bdx_priv));
2018                 priv->pBdxRegs = nic->regs + port * 0x8000;
2019                 priv->port = port;
2020                 priv->pdev = pdev;
2021                 priv->ndev = ndev;
2022                 priv->nic = nic;
2023                 priv->msg_enable = BDX_DEF_MSG_ENABLE;
2024
2025                 netif_napi_add(ndev, &priv->napi, bdx_poll, 64);
2026
2027                 if ((readl(nic->regs + FPGA_VER) & 0xFFF) == 308) {
2028                         DBG("HW statistics not supported\n");
2029                         priv->stats_flag = 0;
2030                 } else {
2031                         priv->stats_flag = 1;
2032                 }
2033
2034                 /* Initialize fifo sizes. */
2035                 priv->txd_size = 2;
2036                 priv->txf_size = 2;
2037                 priv->rxd_size = 2;
2038                 priv->rxf_size = 3;
2039
2040                 /* Initialize the initial coalescing registers. */
2041                 priv->rdintcm = INT_REG_VAL(0x20, 1, 4, 12);
2042                 priv->tdintcm = INT_REG_VAL(0x20, 1, 0, 12);
2043
2044                 /* ndev->xmit_lock spinlock is not used.
2045                  * Private priv->tx_lock is used for synchronization
2046                  * between transmit and TX irq cleanup.  In addition
2047                  * set multicast list callback has to use priv->tx_lock.
2048                  */
2049 #ifdef BDX_LLTX
2050                 ndev->features |= NETIF_F_LLTX;
2051 #endif
2052                 spin_lock_init(&priv->tx_lock);
2053
2054                 /*bdx_hw_reset(priv); */
2055                 if (bdx_read_mac(priv)) {
2056                         printk(KERN_ERR "tehuti: load MAC address failed\n");
2057                         goto err_out_iomap;
2058                 }
2059                 SET_NETDEV_DEV(ndev, &pdev->dev);
2060                 if ((err = register_netdev(ndev))) {
2061                         printk(KERN_ERR "tehuti: register_netdev failed\n");
2062                         goto err_out_free;
2063                 }
2064                 netif_carrier_off(ndev);
2065                 netif_stop_queue(ndev);
2066
2067                 print_eth_id(ndev);
2068         }
2069         RET(0);
2070
2071 err_out_free:
2072         free_netdev(ndev);
2073 err_out_iomap:
2074         iounmap(nic->regs);
2075 err_out_res:
2076         pci_release_regions(pdev);
2077 err_dma:
2078         pci_disable_device(pdev);
2079 err_pci:
2080         vfree(nic);
2081
2082         RET(err);
2083 }
2084
2085 /****************** Ethtool interface *********************/
2086 /* get strings for tests */
2087 static const char
2088  bdx_test_names[][ETH_GSTRING_LEN] = {
2089         "No tests defined"
2090 };
2091
2092 /* get strings for statistics counters */
2093 static const char
2094  bdx_stat_names[][ETH_GSTRING_LEN] = {
2095         "InUCast",              /* 0x7200 */
2096         "InMCast",              /* 0x7210 */
2097         "InBCast",              /* 0x7220 */
2098         "InPkts",               /* 0x7230 */
2099         "InErrors",             /* 0x7240 */
2100         "InDropped",            /* 0x7250 */
2101         "FrameTooLong",         /* 0x7260 */
2102         "FrameSequenceErrors",  /* 0x7270 */
2103         "InVLAN",               /* 0x7280 */
2104         "InDroppedDFE",         /* 0x7290 */
2105         "InDroppedIntFull",     /* 0x72A0 */
2106         "InFrameAlignErrors",   /* 0x72B0 */
2107
2108         /* 0x72C0-0x72E0 RSRV */
2109
2110         "OutUCast",             /* 0x72F0 */
2111         "OutMCast",             /* 0x7300 */
2112         "OutBCast",             /* 0x7310 */
2113         "OutPkts",              /* 0x7320 */
2114
2115         /* 0x7330-0x7360 RSRV */
2116
2117         "OutVLAN",              /* 0x7370 */
2118         "InUCastOctects",       /* 0x7380 */
2119         "OutUCastOctects",      /* 0x7390 */
2120
2121         /* 0x73A0-0x73B0 RSRV */
2122
2123         "InBCastOctects",       /* 0x73C0 */
2124         "OutBCastOctects",      /* 0x73D0 */
2125         "InOctects",            /* 0x73E0 */
2126         "OutOctects",           /* 0x73F0 */
2127 };
2128
2129 /*
2130  * bdx_get_settings - get device-specific settings
2131  * @netdev
2132  * @ecmd
2133  */
2134 static int bdx_get_settings(struct net_device *netdev, struct ethtool_cmd *ecmd)
2135 {
2136         u32 rdintcm;
2137         u32 tdintcm;
2138         struct bdx_priv *priv = netdev->priv;
2139
2140         rdintcm = priv->rdintcm;
2141         tdintcm = priv->tdintcm;
2142
2143         ecmd->supported = (SUPPORTED_10000baseT_Full | SUPPORTED_FIBRE);
2144         ecmd->advertising = (ADVERTISED_10000baseT_Full | ADVERTISED_FIBRE);
2145         ecmd->speed = SPEED_10000;
2146         ecmd->duplex = DUPLEX_FULL;
2147         ecmd->port = PORT_FIBRE;
2148         ecmd->transceiver = XCVR_EXTERNAL;      /* what does it mean? */
2149         ecmd->autoneg = AUTONEG_DISABLE;
2150
2151         /* PCK_TH measures in multiples of FIFO bytes
2152            We translate to packets */
2153         ecmd->maxtxpkt =
2154             ((GET_PCK_TH(tdintcm) * PCK_TH_MULT) / BDX_TXF_DESC_SZ);
2155         ecmd->maxrxpkt =
2156             ((GET_PCK_TH(rdintcm) * PCK_TH_MULT) / sizeof(struct rxf_desc));
2157
2158         return 0;
2159 }
2160
2161 /*
2162  * bdx_get_drvinfo - report driver information
2163  * @netdev
2164  * @drvinfo
2165  */
2166 static void
2167 bdx_get_drvinfo(struct net_device *netdev, struct ethtool_drvinfo *drvinfo)
2168 {
2169         struct bdx_priv *priv = netdev->priv;
2170
2171         strncat(drvinfo->driver, BDX_DRV_NAME, sizeof(drvinfo->driver));
2172         strncat(drvinfo->version, BDX_DRV_VERSION, sizeof(drvinfo->version));
2173         strncat(drvinfo->fw_version, "N/A", sizeof(drvinfo->fw_version));
2174         strncat(drvinfo->bus_info, pci_name(priv->pdev),
2175                 sizeof(drvinfo->bus_info));
2176
2177         drvinfo->n_stats = ((priv->stats_flag) ?
2178                             (sizeof(bdx_stat_names) / ETH_GSTRING_LEN) : 0);
2179         drvinfo->testinfo_len = 0;
2180         drvinfo->regdump_len = 0;
2181         drvinfo->eedump_len = 0;
2182 }
2183
2184 /*
2185  * bdx_get_rx_csum - report whether receive checksums are turned on or off
2186  * @netdev
2187  */
2188 static u32 bdx_get_rx_csum(struct net_device *netdev)
2189 {
2190         return 1;               /* always on */
2191 }
2192
2193 /*
2194  * bdx_get_tx_csum - report whether transmit checksums are turned on or off
2195  * @netdev
2196  */
2197 static u32 bdx_get_tx_csum(struct net_device *netdev)
2198 {
2199         return (netdev->features & NETIF_F_IP_CSUM) != 0;
2200 }
2201
2202 /*
2203  * bdx_get_coalesce - get interrupt coalescing parameters
2204  * @netdev
2205  * @ecoal
2206  */
2207 static int
2208 bdx_get_coalesce(struct net_device *netdev, struct ethtool_coalesce *ecoal)
2209 {
2210         u32 rdintcm;
2211         u32 tdintcm;
2212         struct bdx_priv *priv = netdev->priv;
2213
2214         rdintcm = priv->rdintcm;
2215         tdintcm = priv->tdintcm;
2216
2217         /* PCK_TH measures in multiples of FIFO bytes
2218            We translate to packets */
2219         ecoal->rx_coalesce_usecs = GET_INT_COAL(rdintcm) * INT_COAL_MULT;
2220         ecoal->rx_max_coalesced_frames =
2221             ((GET_PCK_TH(rdintcm) * PCK_TH_MULT) / sizeof(struct rxf_desc));
2222
2223         ecoal->tx_coalesce_usecs = GET_INT_COAL(tdintcm) * INT_COAL_MULT;
2224         ecoal->tx_max_coalesced_frames =
2225             ((GET_PCK_TH(tdintcm) * PCK_TH_MULT) / BDX_TXF_DESC_SZ);
2226
2227         /* adaptive parameters ignored */
2228         return 0;
2229 }
2230
2231 /*
2232  * bdx_set_coalesce - set interrupt coalescing parameters
2233  * @netdev
2234  * @ecoal
2235  */
2236 static int
2237 bdx_set_coalesce(struct net_device *netdev, struct ethtool_coalesce *ecoal)
2238 {
2239         u32 rdintcm;
2240         u32 tdintcm;
2241         struct bdx_priv *priv = netdev->priv;
2242         int rx_coal;
2243         int tx_coal;
2244         int rx_max_coal;
2245         int tx_max_coal;
2246
2247         /* Check for valid input */
2248         rx_coal = ecoal->rx_coalesce_usecs / INT_COAL_MULT;
2249         tx_coal = ecoal->tx_coalesce_usecs / INT_COAL_MULT;
2250         rx_max_coal = ecoal->rx_max_coalesced_frames;
2251         tx_max_coal = ecoal->tx_max_coalesced_frames;
2252
2253         /* Translate from packets to multiples of FIFO bytes */
2254         rx_max_coal =
2255             (((rx_max_coal * sizeof(struct rxf_desc)) + PCK_TH_MULT - 1)
2256              / PCK_TH_MULT);
2257         tx_max_coal =
2258             (((tx_max_coal * BDX_TXF_DESC_SZ) + PCK_TH_MULT - 1)
2259              / PCK_TH_MULT);
2260
2261         if ((rx_coal > 0x7FFF) || (tx_coal > 0x7FFF)
2262             || (rx_max_coal > 0xF) || (tx_max_coal > 0xF))
2263                 return -EINVAL;
2264
2265         rdintcm = INT_REG_VAL(rx_coal, GET_INT_COAL_RC(priv->rdintcm),
2266                               GET_RXF_TH(priv->rdintcm), rx_max_coal);
2267         tdintcm = INT_REG_VAL(tx_coal, GET_INT_COAL_RC(priv->tdintcm), 0,
2268                               tx_max_coal);
2269
2270         priv->rdintcm = rdintcm;
2271         priv->tdintcm = tdintcm;
2272
2273         WRITE_REG(priv, regRDINTCM0, rdintcm);
2274         WRITE_REG(priv, regTDINTCM0, tdintcm);
2275
2276         return 0;
2277 }
2278
2279 /* Convert RX fifo size to number of pending packets */
2280 static inline int bdx_rx_fifo_size_to_packets(int rx_size)
2281 {
2282         return ((FIFO_SIZE * (1 << rx_size)) / sizeof(struct rxf_desc));
2283 }
2284
2285 /* Convert TX fifo size to number of pending packets */
2286 static inline int bdx_tx_fifo_size_to_packets(int tx_size)
2287 {
2288         return ((FIFO_SIZE * (1 << tx_size)) / BDX_TXF_DESC_SZ);
2289 }
2290
2291 /*
2292  * bdx_get_ringparam - report ring sizes
2293  * @netdev
2294  * @ring
2295  */
2296 static void
2297 bdx_get_ringparam(struct net_device *netdev, struct ethtool_ringparam *ring)
2298 {
2299         struct bdx_priv *priv = netdev->priv;
2300
2301         /*max_pending - the maximum-sized FIFO we allow */
2302         ring->rx_max_pending = bdx_rx_fifo_size_to_packets(3);
2303         ring->tx_max_pending = bdx_tx_fifo_size_to_packets(3);
2304         ring->rx_pending = bdx_rx_fifo_size_to_packets(priv->rxf_size);
2305         ring->tx_pending = bdx_tx_fifo_size_to_packets(priv->txd_size);
2306 }
2307
2308 /*
2309  * bdx_set_ringparam - set ring sizes
2310  * @netdev
2311  * @ring
2312  */
2313 static int
2314 bdx_set_ringparam(struct net_device *netdev, struct ethtool_ringparam *ring)
2315 {
2316         struct bdx_priv *priv = netdev->priv;
2317         int rx_size = 0;
2318         int tx_size = 0;
2319
2320         for (; rx_size < 4; rx_size++) {
2321                 if (bdx_rx_fifo_size_to_packets(rx_size) >= ring->rx_pending)
2322                         break;
2323         }
2324         if (rx_size == 4)
2325                 rx_size = 3;
2326
2327         for (; tx_size < 4; tx_size++) {
2328                 if (bdx_tx_fifo_size_to_packets(tx_size) >= ring->tx_pending)
2329                         break;
2330         }
2331         if (tx_size == 4)
2332                 tx_size = 3;
2333
2334         /*Is there anything to do? */
2335         if ((rx_size == priv->rxf_size)
2336             && (tx_size == priv->txd_size))
2337                 return 0;
2338
2339         priv->rxf_size = rx_size;
2340         if (rx_size > 1)
2341                 priv->rxd_size = rx_size - 1;
2342         else
2343                 priv->rxd_size = rx_size;
2344
2345         priv->txf_size = priv->txd_size = tx_size;
2346
2347         if (netif_running(netdev)) {
2348                 bdx_close(netdev);
2349                 bdx_open(netdev);
2350         }
2351         return 0;
2352 }
2353
2354 /*
2355  * bdx_get_strings - return a set of strings that describe the requested objects
2356  * @netdev
2357  * @data
2358  */
2359 static void bdx_get_strings(struct net_device *netdev, u32 stringset, u8 *data)
2360 {
2361         switch (stringset) {
2362         case ETH_SS_TEST:
2363                 memcpy(data, *bdx_test_names, sizeof(bdx_test_names));
2364                 break;
2365         case ETH_SS_STATS:
2366                 memcpy(data, *bdx_stat_names, sizeof(bdx_stat_names));
2367                 break;
2368         }
2369 }
2370
2371 /*
2372  * bdx_get_stats_count - return number of 64bit statistics counters
2373  * @netdev
2374  */
2375 static int bdx_get_stats_count(struct net_device *netdev)
2376 {
2377         struct bdx_priv *priv = netdev->priv;
2378         BDX_ASSERT(sizeof(bdx_stat_names) / ETH_GSTRING_LEN
2379                    != sizeof(struct bdx_stats) / sizeof(u64));
2380         return ((priv->stats_flag) ? (sizeof(bdx_stat_names) / ETH_GSTRING_LEN)
2381                 : 0);
2382 }
2383
2384 /*
2385  * bdx_get_ethtool_stats - return device's hardware L2 statistics
2386  * @netdev
2387  * @stats
2388  * @data
2389  */
2390 static void bdx_get_ethtool_stats(struct net_device *netdev,
2391                                   struct ethtool_stats *stats, u64 *data)
2392 {
2393         struct bdx_priv *priv = netdev->priv;
2394
2395         if (priv->stats_flag) {
2396
2397                 /* Update stats from HW */
2398                 bdx_update_stats(priv);
2399
2400                 /* Copy data to user buffer */
2401                 memcpy(data, &priv->hw_stats, sizeof(priv->hw_stats));
2402         }
2403 }
2404
2405 /*
2406  * bdx_ethtool_ops - ethtool interface implementation
2407  * @netdev
2408  */
2409 static void bdx_ethtool_ops(struct net_device *netdev)
2410 {
2411         static struct ethtool_ops bdx_ethtool_ops = {
2412                 .get_settings = bdx_get_settings,
2413                 .get_drvinfo = bdx_get_drvinfo,
2414                 .get_link = ethtool_op_get_link,
2415                 .get_coalesce = bdx_get_coalesce,
2416                 .set_coalesce = bdx_set_coalesce,
2417                 .get_ringparam = bdx_get_ringparam,
2418                 .set_ringparam = bdx_set_ringparam,
2419                 .get_rx_csum = bdx_get_rx_csum,
2420                 .get_tx_csum = bdx_get_tx_csum,
2421                 .get_sg = ethtool_op_get_sg,
2422                 .get_tso = ethtool_op_get_tso,
2423                 .get_strings = bdx_get_strings,
2424                 .get_stats_count = bdx_get_stats_count,
2425                 .get_ethtool_stats = bdx_get_ethtool_stats,
2426         };
2427
2428         SET_ETHTOOL_OPS(netdev, &bdx_ethtool_ops);
2429 }
2430
2431 /**
2432  * bdx_remove - Device Removal Routine
2433  * @pdev: PCI device information struct
2434  *
2435  * bdx_remove is called by the PCI subsystem to alert the driver
2436  * that it should release a PCI device.  The could be caused by a
2437  * Hot-Plug event, or because the driver is going to be removed from
2438  * memory.
2439  **/
2440 static void __devexit bdx_remove(struct pci_dev *pdev)
2441 {
2442         struct pci_nic *nic = pci_get_drvdata(pdev);
2443         struct net_device *ndev;
2444         int port;
2445
2446         for (port = 0; port < nic->port_num; port++) {
2447                 ndev = nic->priv[port]->ndev;
2448                 unregister_netdev(ndev);
2449                 free_netdev(ndev);
2450         }
2451
2452         /*bdx_hw_reset_direct(nic->regs); */
2453 #ifdef BDX_MSI
2454         if (nic->irq_type == IRQ_MSI)
2455                 pci_disable_msi(pdev);
2456 #endif
2457
2458         iounmap(nic->regs);
2459         pci_release_regions(pdev);
2460         pci_disable_device(pdev);
2461         pci_set_drvdata(pdev, NULL);
2462         vfree(nic);
2463
2464         RET();
2465 }
2466
2467 static struct pci_driver bdx_pci_driver = {
2468         .name = BDX_DRV_NAME,
2469         .id_table = bdx_pci_tbl,
2470         .probe = bdx_probe,
2471         .remove = __devexit_p(bdx_remove),
2472 };
2473
2474 /*
2475  * print_driver_id - print parameters of the driver build
2476  */
2477 static void __init print_driver_id(void)
2478 {
2479         printk(KERN_INFO "%s: %s, %s\n", BDX_DRV_NAME, BDX_DRV_DESC,
2480                BDX_DRV_VERSION);
2481         printk(KERN_INFO "%s: Options: hw_csum %s\n", BDX_DRV_NAME,
2482                BDX_MSI_STRING);
2483 }
2484
2485 static int __init bdx_module_init(void)
2486 {
2487         ENTER;
2488         bdx_firmware_endianess();
2489         init_txd_sizes();
2490         print_driver_id();
2491         RET(pci_register_driver(&bdx_pci_driver));
2492 }
2493
2494 module_init(bdx_module_init);
2495
2496 static void __exit bdx_module_exit(void)
2497 {
2498         ENTER;
2499         pci_unregister_driver(&bdx_pci_driver);
2500         RET();
2501 }
2502
2503 module_exit(bdx_module_exit);
2504
2505 MODULE_LICENSE("GPL");
2506 MODULE_AUTHOR(DRIVER_AUTHOR);
2507 MODULE_DESCRIPTION(BDX_DRV_DESC);