2 * linux/drivers/ide/legacy/macide.c -- Macintosh IDE Driver
4 * Copyright (C) 1998 by Michael Schmitz
6 * This driver was written based on information obtained from the MacOS IDE
7 * driver binary by Mikael Forselius
9 * This file is subject to the terms and conditions of the GNU General Public
10 * License. See the file COPYING in the main directory of this archive for
14 #include <linux/config.h>
15 #include <linux/types.h>
17 #include <linux/interrupt.h>
18 #include <linux/blkdev.h>
19 #include <linux/hdreg.h>
20 #include <linux/delay.h>
21 #include <linux/ide.h>
23 #include <asm/machw.h>
24 #include <asm/macintosh.h>
25 #include <asm/macints.h>
26 #include <asm/mac_baboon.h>
28 #define IDE_BASE 0x50F1A000 /* Base address of IDE controller */
31 * Generic IDE registers as offsets from the base
32 * These match MkLinux so they should be correct.
36 #define IDE_ERROR 0x04 /* see err-bits */
37 #define IDE_NSECTOR 0x08 /* nr of sectors to read/write */
38 #define IDE_SECTOR 0x0c /* starting sector */
39 #define IDE_LCYL 0x10 /* starting cylinder */
40 #define IDE_HCYL 0x14 /* high byte of starting cyl */
41 #define IDE_SELECT 0x18 /* 101dhhhh , d=drive, hhhh=head */
42 #define IDE_STATUS 0x1c /* see status-bits */
43 #define IDE_CONTROL 0x38 /* control/altstatus */
46 * Mac-specific registers
50 * this register is odd; it doesn't seem to do much and it's
51 * not word-aligned like virtually every other hardware register
55 #define IDE_IFR 0x101 /* (0x101) IDE interrupt flags on Quadra:
57 * Bit 0+1: some interrupt flags
58 * Bit 2+3: some interrupt enable
60 * Bit 5: IDE interrupt flag (any hwif)
61 * Bit 6: maybe IDE interrupt enable (any hwif) ??
62 * Bit 7: Any interrupt condition
65 volatile unsigned char *ide_ifr
= (unsigned char *) (IDE_BASE
+ IDE_IFR
);
67 static int macide_offsets
[IDE_NR_PORTS
] = {
68 IDE_DATA
, IDE_ERROR
, IDE_NSECTOR
, IDE_SECTOR
, IDE_LCYL
,
69 IDE_HCYL
, IDE_SELECT
, IDE_STATUS
, IDE_CONTROL
72 int macide_ack_intr(ide_hwif_t
* hwif
)
74 if (*ide_ifr
& 0x20) {
81 #ifdef CONFIG_BLK_DEV_MAC_MEDIABAY
82 static void macide_mediabay_interrupt(int irq
, void *dev_id
, struct pt_regs
*regs
)
84 int state
= baboon
->mb_status
& 0x04;
86 printk(KERN_INFO
"macide: media bay %s detected\n", state
? "removal":"insertion");
91 * Probe for a Macintosh IDE interface
94 void macide_init(void)
100 switch (macintosh_config
->ide_type
) {
102 ide_setup_ports(&hw
, IDE_BASE
, macide_offsets
,
103 0, 0, macide_ack_intr
,
106 index
= ide_register_hw(&hw
, &hwif
);
109 ide_setup_ports(&hw
, IDE_BASE
, macide_offsets
,
110 0, 0, macide_ack_intr
,
113 index
= ide_register_hw(&hw
, &hwif
);
116 ide_setup_ports(&hw
, BABOON_BASE
, macide_offsets
,
118 // macide_baboon_iops,
120 index
= ide_register_hw(&hw
, &hwif
);
121 if (index
== -1) break;
122 if (macintosh_config
->ident
== MAC_MODEL_PB190
) {
124 /* Fix breakage in ide-disk.c: drive capacity */
125 /* is not initialized for drives without a */
126 /* hardware ID, and we can't get that without */
127 /* probing the drive which freezes a 190. */
129 ide_drive_t
*drive
= &ide_hwifs
[index
].drives
[0];
130 drive
->capacity64
= drive
->cyl
*drive
->head
*drive
->sect
;
132 #ifdef CONFIG_BLK_DEV_MAC_MEDIABAY
133 request_irq(IRQ_BABOON_2
, macide_mediabay_interrupt
,
134 IRQ_FLG_FAST
, "mediabay",
135 macide_mediabay_interrupt
);
146 if (macintosh_config
->ide_type
== MAC_IDE_QUADRA
)
147 printk(KERN_INFO
"ide%d: Macintosh Quadra IDE interface\n", index
);
148 else if (macintosh_config
->ide_type
== MAC_IDE_PB
)
149 printk(KERN_INFO
"ide%d: Macintosh Powerbook IDE interface\n", index
);
150 else if (macintosh_config
->ide_type
== MAC_IDE_BABOON
)
151 printk(KERN_INFO
"ide%d: Macintosh Powerbook Baboon IDE interface\n", index
);
153 printk(KERN_INFO
"ide%d: Unknown Macintosh IDE interface\n", index
);