include/linux/sockios.h

   1 /*
   2  * INET         An implementation of the TCP/IP protocol suite for the LINUX
   3  *              operating system.  INET is implemented using the  BSD Socket
   4  *              interface as the means of communication with the user level.
   5  *
   6  *              Definitions of the socket-level I/O control calls.
   7  *
   8  * Version:     @(#)sockios.h   1.0.2   03/09/93
   9  *
  10  * Authors:     Ross Biro
  11  *              Fred N. van Kempen, <waltje@uWalt.NL.Mugnet.ORG>
  12  *
  13  *              This program is free software; you can redistribute it and/or
  14  *              modify it under the terms of the GNU General Public License
  15  *              as published by the Free Software Foundation; either version
  16  *              2 of the License, or (at your option) any later version.
  17  */
  18 #ifndef _LINUX_SOCKIOS_H
  19 #define _LINUX_SOCKIOS_H
  20
  21 #include <asm/sockios.h>
  22
  23 /* Linux-specific socket ioctls */
  24 #define SIOCINQ         FIONREAD
  25 #define SIOCOUTQ        TIOCOUTQ
  26
  27 /* Routing table calls. */
  28 #define SIOCADDRT       0x890B          /* add routing table entry      */
  29 #define SIOCDELRT       0x890C          /* delete routing table entry   */
  30 #define SIOCRTMSG       0x890D          /* call to routing system       */
  31
  32 /* Socket configuration controls. */
  33 #define SIOCGIFNAME     0x8910          /* get iface name               */
  34 #define SIOCSIFLINK     0x8911          /* set iface channel            */
  35 #define SIOCGIFCONF     0x8912          /* get iface list               */
  36 #define SIOCGIFFLAGS    0x8913          /* get flags                    */
  37 #define SIOCSIFFLAGS    0x8914          /* set flags                    */
  38 #define SIOCGIFADDR     0x8915          /* get PA address               */
  39 #define SIOCSIFADDR     0x8916          /* set PA address               */
  40 #define SIOCGIFDSTADDR  0x8917          /* get remote PA address        */
  41 #define SIOCSIFDSTADDR  0x8918          /* set remote PA address        */
  42 #define SIOCGIFBRDADDR  0x8919          /* get broadcast PA address     */
  43 #define SIOCSIFBRDADDR  0x891a          /* set broadcast PA address     */
  44 #define SIOCGIFNETMASK  0x891b          /* get network PA mask          */
  45 #define SIOCSIFNETMASK  0x891c          /* set network PA mask          */
  46 #define SIOCGIFMETRIC   0x891d          /* get metric                   */
  47 #define SIOCSIFMETRIC   0x891e          /* set metric                   */
  48 #define SIOCGIFMEM      0x891f          /* get memory address (BSD)     */
  49 #define SIOCSIFMEM      0x8920          /* set memory address (BSD)     */
  50 #define SIOCGIFMTU      0x8921          /* get MTU size                 */
  51 #define SIOCSIFMTU      0x8922          /* set MTU size                 */
  52 #define SIOCSIFNAME     0x8923          /* set interface name */
  53 #define SIOCSIFHWADDR   0x8924          /* set hardware address         */
  54 #define SIOCGIFENCAP    0x8925          /* get/set encapsulations       */
  55 #define SIOCSIFENCAP    0x8926
  56 #define SIOCGIFHWADDR   0x8927          /* Get hardware address         */
  57 #define SIOCGIFSLAVE    0x8929          /* Driver slaving support       */
  58 #define SIOCSIFSLAVE    0x8930
  59 #define SIOCADDMULTI    0x8931          /* Multicast address lists      */
  60 #define SIOCDELMULTI    0x8932
  61 #define SIOCGIFINDEX    0x8933          /* name -> if_index mapping     */
  62 #define SIOGIFINDEX     SIOCGIFINDEX    /* misprint compatibility :-)   */
  63 #define SIOCSIFPFLAGS   0x8934          /* set/get extended flags set   */
  64 #define SIOCGIFPFLAGS   0x8935
  65 #define SIOCDIFADDR     0x8936          /* delete PA address            */
  66 #define SIOCSIFHWBROADCAST      0x8937  /* set hardware broadcast addr  */
  67 #define SIOCGIFCOUNT    0x8938          /* get number of devices */
  68
  69 #define SIOCGIFBR       0x8940          /* Bridging support             */
  70 #define SIOCSIFBR       0x8941          /* Set bridging options         */
  71
  72 #define SIOCGIFTXQLEN   0x8942          /* Get the tx queue length      */
  73 #define SIOCSIFTXQLEN   0x8943          /* Set the tx queue length      */
  74
  75 /* SIOCGIFDIVERT was:   0x8944          Frame diversion support */
  76 /* SIOCSIFDIVERT was:   0x8945          Set frame diversion options */
  77
  78 #define SIOCETHTOOL     0x8946          /* Ethtool interface            */
  79
  80 #define SIOCGMIIPHY     0x8947          /* Get address of MII PHY in use. */
  81 #define SIOCGMIIREG     0x8948          /* Read MII PHY register.       */
  82 #define SIOCSMIIREG     0x8949          /* Write MII PHY register.      */
  83
  84 #define SIOCWANDEV      0x894A          /* get/set netdev parameters    */
  85
  86 /* ARP cache control calls. */
  87                     /*  0x8950 - 0x8952  * obsolete calls, don't re-use */
  88 #define SIOCDARP        0x8953          /* delete ARP table entry       */
  89 #define SIOCGARP        0x8954          /* get ARP table entry          */
  90 #define SIOCSARP        0x8955          /* set ARP table entry          */
  91
  92 /* RARP cache control calls. */
  93 #define SIOCDRARP       0x8960          /* delete RARP table entry      */
  94 #define SIOCGRARP       0x8961          /* get RARP table entry         */
  95 #define SIOCSRARP       0x8962          /* set RARP table entry         */
  96
  97 /* Driver configuration calls */
  98
  99 #define SIOCGIFMAP      0x8970          /* Get device parameters        */
 100 #define SIOCSIFMAP      0x8971          /* Set device parameters        */
 101
 102 /* DLCI configuration calls */
 103
 104 #define SIOCADDDLCI     0x8980          /* Create new DLCI device       */
 105 #define SIOCDELDLCI     0x8981          /* Delete DLCI device           */
 106
 107 #define SIOCGIFVLAN     0x8982          /* 802.1Q VLAN support          */
 108 #define SIOCSIFVLAN     0x8983          /* Set 802.1Q VLAN options      */
 109
 110 /* bonding calls */
 111
 112 #define SIOCBONDENSLAVE 0x8990          /* enslave a device to the bond */
 113 #define SIOCBONDRELEASE 0x8991          /* release a slave from the bond*/
 114 #define SIOCBONDSETHWADDR      0x8992   /* set the hw addr of the bond  */
 115 #define SIOCBONDSLAVEINFOQUERY 0x8993   /* rtn info about slave state   */
 116 #define SIOCBONDINFOQUERY      0x8994   /* rtn info about bond state    */
 117 #define SIOCBONDCHANGEACTIVE   0x8995   /* update to a new active slave */
 118
 119 /* bridge calls */
 120 #define SIOCBRADDBR     0x89a0          /* create new bridge device     */
 121 #define SIOCBRDELBR     0x89a1          /* remove bridge device         */
 122 #define SIOCBRADDIF     0x89a2          /* add interface to bridge      */
 123 #define SIOCBRDELIF     0x89a3          /* remove interface from bridge */
 124
 125 /* hardware time stamping: parameters in linux/net_tstamp.h */
 126 #define SIOCSHWTSTAMP   0x89b0
 127
 128 /* Device private ioctl calls */
 129
 130 /*
 131  *      These 16 ioctls are available to devices via the do_ioctl() device
 132  *      vector. Each device should include this file and redefine these names
 133  *      as their own. Because these are device dependent it is a good idea
 134  *      _NOT_ to issue them to random objects and hope.
 135  *
 136  *      THESE IOCTLS ARE _DEPRECATED_ AND WILL DISAPPEAR IN 2.5.X -DaveM
 137  */
 138
 139 #define SIOCDEVPRIVATE  0x89F0  /* to 89FF */
 140
 141 /*
 142  *      These 16 ioctl calls are protocol private
 143  */
 144
 145 #define SIOCPROTOPRIVATE 0x89E0 /* to 89EF */
 146 #endif  /* _LINUX_SOCKIOS_H */