arch/arm/mach-pxa/cm-x270.c

   1 /*
   2  * linux/arch/arm/mach-pxa/cm-x270.c
   3  *
   4  * Copyright (C) 2007 CompuLab, Ltd.
   5  * Mike Rapoport <mike@compulab.co.il>
   6  *
   7  * This program is free software; you can redistribute it and/or modify
   8  * it under the terms of the GNU General Public License version 2 as
   9  * published by the Free Software Foundation.
  10  */
  11
  12 #include <linux/types.h>
  13 #include <linux/pm.h>
  14 #include <linux/fb.h>
  15 #include <linux/platform_device.h>
  16 #include <linux/irq.h>
  17 #include <linux/sysdev.h>
  18 #include <linux/io.h>
  19 #include <linux/delay.h>
  20
  21 #include <linux/dm9000.h>
  22 #include <linux/rtc-v3020.h>
  23 #include <linux/serial_8250.h>
  24
  25 #include <video/mbxfb.h>
  26
  27 #include <asm/mach/arch.h>
  28 #include <asm/mach-types.h>
  29 #include <asm/mach/map.h>
  30
  31 #include <asm/arch/pxa-regs.h>
  32 #include <asm/arch/pxa2xx-regs.h>
  33 #include <asm/arch/pxafb.h>
  34 #include <asm/arch/ohci.h>
  35 #include <asm/arch/mmc.h>
  36 #include <asm/arch/bitfield.h>
  37 #include <asm/arch/cm-x270.h>
  38
  39 #include <asm/hardware/it8152.h>
  40
  41 #include "generic.h"
  42 #include "cm-x270-pci.h"
  43
  44 #define RTC_PHYS_BASE           (PXA_CS1_PHYS + (5 << 22))
  45 #define DM9000_PHYS_BASE        (PXA_CS1_PHYS + (6 << 22))
  46
  47 static struct resource cmx270_dm9k_resource[] = {
  48         [0] = {
  49                 .start = DM9000_PHYS_BASE,
  50                 .end   = DM9000_PHYS_BASE + 4,
  51                 .flags = IORESOURCE_MEM,
  52         },
  53         [1] = {
  54                 .start = DM9000_PHYS_BASE + 8,
  55                 .end   = DM9000_PHYS_BASE + 8 + 500,
  56                 .flags = IORESOURCE_MEM,
  57         },
  58         [2] = {
  59                 .start = CMX270_ETHIRQ,
  60                 .end   = CMX270_ETHIRQ,
  61                 .flags = IORESOURCE_IRQ,
  62         }
  63 };
  64
  65 /* for the moment we limit ourselves to 32bit IO until some
  66  * better IO routines can be written and tested
  67  */
  68 static struct dm9000_plat_data cmx270_dm9k_platdata = {
  69         .flags          = DM9000_PLATF_32BITONLY,
  70 };
  71
  72 /* Ethernet device */
  73 static struct platform_device cmx270_device_dm9k = {
  74         .name           = "dm9000",
  75         .id             = 0,
  76         .num_resources  = ARRAY_SIZE(cmx270_dm9k_resource),
  77         .resource       = cmx270_dm9k_resource,
  78         .dev            = {
  79                 .platform_data = &cmx270_dm9k_platdata,
  80         }
  81 };
  82
  83 /* audio device */
  84 static struct platform_device cmx270_audio_device = {
  85         .name           = "pxa2xx-ac97",
  86         .id             = -1,
  87 };
  88
  89 /* touchscreen controller */
  90 static struct platform_device cmx270_ts_device = {
  91         .name           = "ucb1400_ts",
  92         .id             = -1,
  93 };
  94
  95 /* RTC */
  96 static struct resource cmx270_v3020_resource[] = {
  97         [0] = {
  98                 .start = RTC_PHYS_BASE,
  99                 .end   = RTC_PHYS_BASE + 4,
 100                 .flags = IORESOURCE_MEM,
 101         },
 102 };
 103
 104 struct v3020_platform_data cmx270_v3020_pdata = {
 105         .leftshift = 16,
 106 };
 107
 108 static struct platform_device cmx270_rtc_device = {
 109         .name           = "v3020",
 110         .num_resources  = ARRAY_SIZE(cmx270_v3020_resource),
 111         .resource       = cmx270_v3020_resource,
 112         .id             = -1,
 113         .dev            = {
 114                 .platform_data = &cmx270_v3020_pdata,
 115         }
 116 };
 117
 118 /*
 119  * CM-X270 LEDs
 120  */
 121 static struct platform_device cmx270_led_device = {
 122         .name           = "cm-x270-led",
 123         .id             = -1,
 124 };
 125
 126 /* 2700G graphics */
 127 static u64 fb_dma_mask = ~(u64)0;
 128
 129 static struct resource cmx270_2700G_resource[] = {
 130         /* frame buffer memory including ODFB and External SDRAM */
 131         [0] = {
 132                 .start = MARATHON_PHYS,
 133                 .end   = MARATHON_PHYS + 0x02000000,
 134                 .flags = IORESOURCE_MEM,
 135         },
 136         /* Marathon registers */
 137         [1] = {
 138                 .start = MARATHON_PHYS + 0x03fe0000,
 139                 .end   = MARATHON_PHYS + 0x03ffffff,
 140                 .flags = IORESOURCE_MEM,
 141         },
 142 };
 143
 144 static unsigned long save_lcd_regs[10];
 145
 146 static int cmx270_marathon_probe(struct fb_info *fb)
 147 {
 148         /* save PXA-270 pin settings before enabling 2700G */
 149         save_lcd_regs[0] = GPDR1;
 150         save_lcd_regs[1] = GPDR2;
 151         save_lcd_regs[2] = GAFR1_U;
 152         save_lcd_regs[3] = GAFR2_L;
 153         save_lcd_regs[4] = GAFR2_U;
 154
 155         /* Disable PXA-270 on-chip controller driving pins */
 156         GPDR1 &= ~(0xfc000000);
 157         GPDR2 &= ~(0x00c03fff);
 158         GAFR1_U &= ~(0xfff00000);
 159         GAFR2_L &= ~(0x0fffffff);
 160         GAFR2_U &= ~(0x0000f000);
 161         return 0;
 162 }
 163
 164 static int cmx270_marathon_remove(struct fb_info *fb)
 165 {
 166         GPDR1 =   save_lcd_regs[0];
 167         GPDR2 =   save_lcd_regs[1];
 168         GAFR1_U = save_lcd_regs[2];
 169         GAFR2_L = save_lcd_regs[3];
 170         GAFR2_U = save_lcd_regs[4];
 171         return 0;
 172 }
 173
 174 static struct mbxfb_platform_data cmx270_2700G_data = {
 175         .xres = {
 176                 .min = 240,
 177                 .max = 1200,
 178                 .defval = 640,
 179         },
 180         .yres = {
 181                 .min = 240,
 182                 .max = 1200,
 183                 .defval = 480,
 184         },
 185         .bpp = {
 186                 .min = 16,
 187                 .max = 32,
 188                 .defval = 16,
 189         },
 190         .memsize = 8*1024*1024,
 191         .probe = cmx270_marathon_probe,
 192         .remove = cmx270_marathon_remove,
 193 };
 194
 195 static struct platform_device cmx270_2700G = {
 196         .name           = "mbx-fb",
 197         .dev            = {
 198                 .platform_data  = &cmx270_2700G_data,
 199                 .dma_mask       = &fb_dma_mask,
 200                 .coherent_dma_mask = 0xffffffff,
 201         },
 202         .num_resources  = ARRAY_SIZE(cmx270_2700G_resource),
 203         .resource       = cmx270_2700G_resource,
 204         .id             = -1,
 205 };
 206
 207 static u64 ata_dma_mask = ~(u64)0;
 208
 209 static struct platform_device cmx270_ata = {
 210         .name = "pata_cm_x270",
 211         .id = -1,
 212         .dev            = {
 213                 .dma_mask       = &ata_dma_mask,
 214                 .coherent_dma_mask = 0xffffffff,
 215         },
 216 };
 217
 218 /* platform devices */
 219 static struct platform_device *platform_devices[] __initdata = {
 220         &cmx270_device_dm9k,
 221         &cmx270_audio_device,
 222         &cmx270_rtc_device,
 223         &cmx270_2700G,
 224         &cmx270_led_device,
 225         &cmx270_ts_device,
 226         &cmx270_ata,
 227 };
 228
 229 /* Map PCI companion and IDE/General Purpose CS statically */
 230 static struct map_desc cmx270_io_desc[] __initdata = {
 231         [0] = { /* IDE/general purpose space */
 232                 .virtual        = CMX270_IDE104_VIRT,
 233                 .pfn            = __phys_to_pfn(CMX270_IDE104_PHYS),
 234                 .length         = SZ_64M - SZ_8M,
 235                 .type           = MT_DEVICE
 236         },
 237         [1] = { /* PCI bridge */
 238                 .virtual        = CMX270_IT8152_VIRT,
 239                 .pfn            = __phys_to_pfn(CMX270_IT8152_PHYS),
 240                 .length         = SZ_64M,
 241                 .type           = MT_DEVICE
 242         },
 243 };
 244
 245 /*
 246   Display definitions
 247   keep these for backwards compatibility, although symbolic names (as
 248   e.g. in lpd270.c) looks better
 249 */
 250 #define MTYPE_STN320x240        0
 251 #define MTYPE_TFT640x480        1
 252 #define MTYPE_CRT640x480        2
 253 #define MTYPE_CRT800x600        3
 254 #define MTYPE_TFT320x240        6
 255 #define MTYPE_STN640x480        7
 256
 257 static struct pxafb_mode_info generic_stn_320x240_mode = {
 258         .pixclock       = 76923,
 259         .bpp            = 8,
 260         .xres           = 320,
 261         .yres           = 240,
 262         .hsync_len      = 3,
 263         .vsync_len      = 2,
 264         .left_margin    = 3,
 265         .upper_margin   = 0,
 266         .right_margin   = 3,
 267         .lower_margin   = 0,
 268         .sync           = (FB_SYNC_HOR_HIGH_ACT |
 269                            FB_SYNC_VERT_HIGH_ACT),
 270         .cmap_greyscale = 0,
 271 };
 272
 273 static struct pxafb_mach_info generic_stn_320x240 = {
 274         .modes          = &generic_stn_320x240_mode,
 275         .num_modes      = 1,
 276         .lccr0          = 0,
 277         .lccr3          = (LCCR3_PixClkDiv(0x03) |
 278                            LCCR3_Acb(0xff) |
 279                            LCCR3_PCP),
 280         .cmap_inverse   = 0,
 281         .cmap_static    = 0,
 282 };
 283
 284 static struct pxafb_mode_info generic_tft_640x480_mode = {
 285         .pixclock       = 38461,
 286         .bpp            = 8,
 287         .xres           = 640,
 288         .yres           = 480,
 289         .hsync_len      = 60,
 290         .vsync_len      = 2,
 291         .left_margin    = 70,
 292         .upper_margin   = 10,
 293         .right_margin   = 70,
 294         .lower_margin   = 5,
 295         .sync           = 0,
 296         .cmap_greyscale = 0,
 297 };
 298
 299 static struct pxafb_mach_info generic_tft_640x480 = {
 300         .modes          = &generic_tft_640x480_mode,
 301         .num_modes      = 1,
 302         .lccr0          = (LCCR0_PAS),
 303         .lccr3          = (LCCR3_PixClkDiv(0x01) |
 304                            LCCR3_Acb(0xff) |
 305                            LCCR3_PCP),
 306         .cmap_inverse   = 0,
 307         .cmap_static    = 0,
 308 };
 309
 310 static struct pxafb_mode_info generic_crt_640x480_mode = {
 311         .pixclock       = 38461,
 312         .bpp            = 8,
 313         .xres           = 640,
 314         .yres           = 480,
 315         .hsync_len      = 63,
 316         .vsync_len      = 2,
 317         .left_margin    = 81,
 318         .upper_margin   = 33,
 319         .right_margin   = 16,
 320         .lower_margin   = 10,
 321         .sync           = (FB_SYNC_HOR_HIGH_ACT |
 322                            FB_SYNC_VERT_HIGH_ACT),
 323         .cmap_greyscale = 0,
 324 };
 325
 326 static struct pxafb_mach_info generic_crt_640x480 = {
 327         .modes          = &generic_crt_640x480_mode,
 328         .num_modes      = 1,
 329         .lccr0          = (LCCR0_PAS),
 330         .lccr3          = (LCCR3_PixClkDiv(0x01) |
 331                            LCCR3_Acb(0xff)),
 332         .cmap_inverse   = 0,
 333         .cmap_static    = 0,
 334 };
 335
 336 static struct pxafb_mode_info generic_crt_800x600_mode = {
 337         .pixclock       = 28846,
 338         .bpp            = 8,
 339         .xres           = 800,
 340         .yres           = 600,
 341         .hsync_len      = 63,
 342         .vsync_len      = 2,
 343         .left_margin    = 26,
 344         .upper_margin   = 21,
 345         .right_margin   = 26,
 346         .lower_margin   = 11,
 347         .sync           = (FB_SYNC_HOR_HIGH_ACT |
 348                            FB_SYNC_VERT_HIGH_ACT),
 349         .cmap_greyscale = 0,
 350 };
 351
 352 static struct pxafb_mach_info generic_crt_800x600 = {
 353         .modes          = &generic_crt_800x600_mode,
 354         .num_modes      = 1,
 355         .lccr0          = (LCCR0_PAS),
 356         .lccr3          = (LCCR3_PixClkDiv(0x02) |
 357                            LCCR3_Acb(0xff)),
 358         .cmap_inverse   = 0,
 359         .cmap_static    = 0,
 360 };
 361
 362 static struct pxafb_mode_info generic_tft_320x240_mode = {
 363         .pixclock       = 134615,
 364         .bpp            = 16,
 365         .xres           = 320,
 366         .yres           = 240,
 367         .hsync_len      = 63,
 368         .vsync_len      = 7,
 369         .left_margin    = 75,
 370         .upper_margin   = 0,
 371         .right_margin   = 15,
 372         .lower_margin   = 15,
 373         .sync           = 0,
 374         .cmap_greyscale = 0,
 375 };
 376
 377 static struct pxafb_mach_info generic_tft_320x240 = {
 378         .modes          = &generic_tft_320x240_mode,
 379         .num_modes      = 1,
 380         .lccr0          = (LCCR0_PAS),
 381         .lccr3          = (LCCR3_PixClkDiv(0x06) |
 382                            LCCR3_Acb(0xff) |
 383                            LCCR3_PCP),
 384         .cmap_inverse   = 0,
 385         .cmap_static    = 0,
 386 };
 387
 388 static struct pxafb_mode_info generic_stn_640x480_mode = {
 389         .pixclock       = 57692,
 390         .bpp            = 8,
 391         .xres           = 640,
 392         .yres           = 480,
 393         .hsync_len      = 4,
 394         .vsync_len      = 2,
 395         .left_margin    = 10,
 396         .upper_margin   = 5,
 397         .right_margin   = 10,
 398         .lower_margin   = 5,
 399         .sync           = (FB_SYNC_HOR_HIGH_ACT |
 400                            FB_SYNC_VERT_HIGH_ACT),
 401         .cmap_greyscale = 0,
 402 };
 403
 404 static struct pxafb_mach_info generic_stn_640x480 = {
 405         .modes          = &generic_stn_640x480_mode,
 406         .num_modes      = 1,
 407         .lccr0          = 0,
 408         .lccr3          = (LCCR3_PixClkDiv(0x02) |
 409                            LCCR3_Acb(0xff)),
 410         .cmap_inverse   = 0,
 411         .cmap_static    = 0,
 412 };
 413
 414 static struct pxafb_mach_info *cmx270_display = &generic_crt_640x480;
 415
 416 static int __init cmx270_set_display(char *str)
 417 {
 418         int disp_type = simple_strtol(str, NULL, 0);
 419         switch (disp_type) {
 420         case MTYPE_STN320x240:
 421                 cmx270_display = &generic_stn_320x240;
 422                 break;
 423         case MTYPE_TFT640x480:
 424                 cmx270_display = &generic_tft_640x480;
 425                 break;
 426         case MTYPE_CRT640x480:
 427                 cmx270_display = &generic_crt_640x480;
 428                 break;
 429         case MTYPE_CRT800x600:
 430                 cmx270_display = &generic_crt_800x600;
 431                 break;
 432         case MTYPE_TFT320x240:
 433                 cmx270_display = &generic_tft_320x240;
 434                 break;
 435         case MTYPE_STN640x480:
 436                 cmx270_display = &generic_stn_640x480;
 437                 break;
 438         default: /* fallback to CRT 640x480 */
 439                 cmx270_display = &generic_crt_640x480;
 440                 break;
 441         }
 442         return 1;
 443 }
 444
 445 /*
 446    This should be done really early to get proper configuration for
 447    frame buffer.
 448    Indeed, pxafb parameters can be used istead, but CM-X270 bootloader
 449    has limitied line length for kernel command line, and also it will
 450    break compatibitlty with proprietary releases already in field.
 451 */
 452 __setup("monitor=", cmx270_set_display);
 453
 454 /* PXA27x OHCI controller setup */
 455 static int cmx270_ohci_init(struct device *dev)
 456 {
 457         /* Set the Power Control Polarity Low */
 458         UHCHR = (UHCHR | UHCHR_PCPL) &
 459                 ~(UHCHR_SSEP1 | UHCHR_SSEP2 | UHCHR_SSE);
 460
 461         return 0;
 462 }
 463
 464 static struct pxaohci_platform_data cmx270_ohci_platform_data = {
 465         .port_mode      = PMM_PERPORT_MODE,
 466         .init           = cmx270_ohci_init,
 467 };
 468
 469
 470 static int cmx270_mci_init(struct device *dev,
 471                            irq_handler_t cmx270_detect_int,
 472                            void *data)
 473 {
 474         int err;
 475
 476         /*
 477          * setup GPIO for PXA27x MMC controller
 478          */
 479         pxa_gpio_mode(GPIO32_MMCCLK_MD);
 480         pxa_gpio_mode(GPIO112_MMCCMD_MD);
 481         pxa_gpio_mode(GPIO92_MMCDAT0_MD);
 482         pxa_gpio_mode(GPIO109_MMCDAT1_MD);
 483         pxa_gpio_mode(GPIO110_MMCDAT2_MD);
 484         pxa_gpio_mode(GPIO111_MMCDAT3_MD);
 485
 486         /* SB-X270 uses GPIO105 as SD power enable */
 487         pxa_gpio_mode(105 | GPIO_OUT);
 488
 489         /* card detect IRQ on GPIO 83 */
 490         pxa_gpio_mode(IRQ_TO_GPIO(CMX270_MMC_IRQ));
 491
 492         err = request_irq(CMX270_MMC_IRQ, cmx270_detect_int,
 493                           IRQF_DISABLED | IRQF_TRIGGER_FALLING,
 494                           "MMC card detect", data);
 495         if (err)
 496                 printk(KERN_ERR "cmx270_mci_init: MMC/SD: can't"
 497                        " request MMC card detect IRQ\n");
 498
 499         return err;
 500 }
 501
 502 static void cmx270_mci_setpower(struct device *dev, unsigned int vdd)
 503 {
 504         struct pxamci_platform_data *p_d = dev->platform_data;
 505
 506         if ((1 << vdd) & p_d->ocr_mask) {
 507                 printk(KERN_DEBUG "%s: on\n", __FUNCTION__);
 508                 GPCR(105) = GPIO_bit(105);
 509         } else {
 510                 GPSR(105) = GPIO_bit(105);
 511                 printk(KERN_DEBUG "%s: off\n", __FUNCTION__);
 512         }
 513 }
 514
 515 static void cmx270_mci_exit(struct device *dev, void *data)
 516 {
 517         free_irq(CMX270_MMC_IRQ, data);
 518 }
 519
 520 static struct pxamci_platform_data cmx270_mci_platform_data = {
 521         .ocr_mask       = MMC_VDD_32_33|MMC_VDD_33_34,
 522         .init           = cmx270_mci_init,
 523         .setpower       = cmx270_mci_setpower,
 524         .exit           = cmx270_mci_exit,
 525 };
 526
 527 #ifdef CONFIG_PM
 528 static unsigned long sleep_save_msc[10];
 529
 530 static int cmx270_suspend(struct sys_device *dev, pm_message_t state)
 531 {
 532         cmx270_pci_suspend();
 533
 534         /* save MSC registers */
 535         sleep_save_msc[0] = MSC0;
 536         sleep_save_msc[1] = MSC1;
 537         sleep_save_msc[2] = MSC2;
 538
 539         /* setup power saving mode registers */
 540         PCFR = 0x0;
 541         PSLR = 0xff400000;
 542         PMCR  = 0x00000005;
 543         PWER  = 0x80000000;
 544         PFER  = 0x00000000;
 545         PRER  = 0x00000000;
 546         PGSR0 = 0xC0018800;
 547         PGSR1 = 0x004F0002;
 548         PGSR2 = 0x6021C000;
 549         PGSR3 = 0x00020000;
 550
 551         return 0;
 552 }
 553
 554 static int cmx270_resume(struct sys_device *dev)
 555 {
 556         cmx270_pci_resume();
 557
 558         /* restore MSC registers */
 559         MSC0 = sleep_save_msc[0];
 560         MSC1 = sleep_save_msc[1];
 561         MSC2 = sleep_save_msc[2];
 562
 563         return 0;
 564 }
 565
 566 static struct sysdev_class cmx270_pm_sysclass = {
 567         .name = "pm",
 568         .resume = cmx270_resume,
 569         .suspend = cmx270_suspend,
 570 };
 571
 572 static struct sys_device cmx270_pm_device = {
 573         .cls = &cmx270_pm_sysclass,
 574 };
 575
 576 static int __init cmx270_pm_init(void)
 577 {
 578         int error;
 579         error = sysdev_class_register(&cmx270_pm_sysclass);
 580         if (error == 0)
 581                 error = sysdev_register(&cmx270_pm_device);
 582         return error;
 583 }
 584 #else
 585 static int __init cmx270_pm_init(void) { return 0; }
 586 #endif
 587
 588 static void __init cmx270_init(void)
 589 {
 590         cmx270_pm_init();
 591
 592         set_pxa_fb_info(cmx270_display);
 593
 594         /* register CM-X270 platform devices */
 595         platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
 596
 597         /* set MCI and OHCI platform parameters */
 598         pxa_set_mci_info(&cmx270_mci_platform_data);
 599         pxa_set_ohci_info(&cmx270_ohci_platform_data);
 600
 601         /* This enables the STUART */
 602         pxa_gpio_mode(GPIO46_STRXD_MD);
 603         pxa_gpio_mode(GPIO47_STTXD_MD);
 604
 605         /* This enables the BTUART  */
 606         pxa_gpio_mode(GPIO42_BTRXD_MD);
 607         pxa_gpio_mode(GPIO43_BTTXD_MD);
 608         pxa_gpio_mode(GPIO44_BTCTS_MD);
 609         pxa_gpio_mode(GPIO45_BTRTS_MD);
 610 }
 611
 612 static void __init cmx270_init_irq(void)
 613 {
 614         pxa27x_init_irq();
 615
 616
 617         cmx270_pci_init_irq();
 618
 619         /* Setup interrupt for dm9000 */
 620         pxa_gpio_mode(IRQ_TO_GPIO(CMX270_ETHIRQ));
 621         set_irq_type(CMX270_ETHIRQ, IRQT_RISING);
 622
 623         /* Setup interrupt for 2700G */
 624         pxa_gpio_mode(IRQ_TO_GPIO(CMX270_GFXIRQ));
 625         set_irq_type(CMX270_GFXIRQ, IRQT_FALLING);
 626 }
 627
 628 static void __init cmx270_map_io(void)
 629 {
 630         pxa_map_io();
 631         iotable_init(cmx270_io_desc, ARRAY_SIZE(cmx270_io_desc));
 632 }
 633
 634
 635 MACHINE_START(ARMCORE, "Compulab CM-x270")
 636         .boot_params    = 0xa0000100,
 637         .phys_io        = 0x40000000,
 638         .io_pg_offst    = (io_p2v(0x40000000) >> 18) & 0xfffc,
 639         .map_io         = cmx270_map_io,
 640         .init_irq       = cmx270_init_irq,
 641         .timer          = &pxa_timer,
 642         .init_machine   = cmx270_init,
 643 MACHINE_END