?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
Linux 2.6.25-rc4
[linux-2.6/next.git] / arch / ppc / 4xx_io / serial_sicc.c
blobefa0a56e230bfe2880cdee863921fb1f7e9fec49
1 /*
2 * Driver for IBM STB3xxx SICC serial port
3 *
4 * Based on drivers/char/serial_amba.c, by ARM Ltd.
5 *
6 * Copyright 2001 IBM Corp.
7 * Author: IBM China Research Lab
8 * Yudong Yang <yangyud@cn.ibm.com>
9 * Yi Ge <geyi@cn.ibm.com>
10 *
11 * This program is free software; you can redistribute it and/or modify
12 * it under the terms of the GNU General Public License as published by
13 * the Free Software Foundation; either version 2 of the License, or
14 * (at your option) any later version.
15 *
16 * This program is distributed in the hope that it will be useful,
17 * but WITHOUT ANY WARRANTY; without even the implied warranty of
18 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
19 * GNU General Public License for more details.
20 *
21 * You should have received a copy of the GNU General Public License
22 * along with this program; if not, write to the Free Software
23 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
24 *
25 *
26 * This is a driver for SICC serial port on IBM Redwood 4 evaluation board.
27 * The driver support both as a console device and normal serial device and
28 * is compatible with normal ttyS* devices.
29 */
30
31 #include <linux/module.h>
32 #include <linux/kernel.h>
33 #include <linux/errno.h>
34 #include <linux/signal.h>
35 #include <linux/sched.h>
36 #include <linux/interrupt.h>
37 #include <linux/tty.h>
38 #include <linux/tty_flip.h>
39 #include <linux/major.h>
40 #include <linux/string.h>
41 #include <linux/fcntl.h>
42 #include <linux/ptrace.h>
43 #include <linux/ioport.h>
44 #include <linux/mm.h>
45 #include <linux/slab.h>
46 #include <linux/init.h>
47 #include <linux/capability.h>
48 #include <linux/circ_buf.h>
49 #include <linux/serial.h>
50 #include <linux/console.h>
51 #include <linux/sysrq.h>
52 #include <linux/bitops.h>
53
54 #include <asm/system.h>
55 #include <asm/io.h>
56 #include <asm/irq.h>
57 #include <asm/uaccess.h>
58 #include <asm/serial.h>
59
60
61 #include <linux/serialP.h>
62
63
64 /* -----------------------------------------------------------------------------
65 * From STB03xxx SICC UART Specification
66 * -----------------------------------------------------------------------------
67 * UART Register Offsets.
68 */
69
70 #define BL_SICC_LSR 0x0000000 /* line status register read/clear */
71 #define BL_SICC_LSRS 0x0000001 /* set line status register read/set */
72 #define BL_SICC_HSR 0x0000002 /* handshake status register r/clear */
73 #define BL_SICC_HSRS 0x0000003 /* set handshake status register r/set */
74 #define BL_SICC_BRDH 0x0000004 /* baudrate divisor high reg r/w */
75 #define BL_SICC_BRDL 0x0000005 /* baudrate divisor low reg r/w */
76 #define BL_SICC_LCR 0x0000006 /* control register r/w */
77 #define BL_SICC_RCR 0x0000007 /* receiver command register r/w */
78 #define BL_SICC_TxCR 0x0000008 /* transmitter command register r/w */
79 #define BL_SICC_RBR 0x0000009 /* receive buffer r */
80 #define BL_SICC_TBR 0x0000009 /* transmit buffer w */
81 #define BL_SICC_CTL2 0x000000A /* added for Vesta */
82 #define BL_SICC_IrCR 0x000000B /* added for Vesta IR */
83
84 /* masks and definitions for serial port control register */
85
86 #define _LCR_LM_MASK 0xc0 /* loop back modes */
87 #define _LCR_DTR_MASK 0x20 /* data terminal ready 0-inactive */
88 #define _LCR_RTS_MASK 0x10 /* request to send 0-inactive */
89 #define _LCR_DB_MASK 0x08 /* data bits mask */
90 #define _LCR_PE_MASK 0x04 /* parity enable */
91 #define _LCR_PTY_MASK 0x02 /* parity */
92 #define _LCR_SB_MASK 0x01 /* stop bit mask */
93
94 #define _LCR_LM_NORM 0x00 /* normal operation */
95 #define _LCR_LM_LOOP 0x40 /* internal loopback mode */
96 #define _LCR_LM_ECHO 0x80 /* automatic echo mode */
97 #define _LCR_LM_RES 0xc0 /* reserved */
98
99 #define _LCR_DTR_ACTIVE _LCR_DTR_MASK /* DTR is active */
100 #define _LCR_RTS_ACTIVE _LCR_RTS_MASK /* RTS is active */
101 #define _LCR_DB_8_BITS _LCR_DB_MASK /* 8 data bits */
102 #define _LCR_DB_7_BITS 0x00 /* 7 data bits */
103 #define _LCR_PE_ENABLE _LCR_PE_MASK /* parity enabled */
104 #define _LCR_PE_DISABLE 0x00 /* parity disabled */
105 #define _LCR_PTY_EVEN 0x00 /* even parity */
106 #define _LCR_PTY_ODD _LCR_PTY_MASK /* odd parity */
107 #define _LCR_SB_1_BIT 0x00 /* one stop bit */
108 #define _LCR_SB_2_BIT _LCR_SB_MASK /* two stop bit */
109
110 /* serial port handshake register */
111
112 #define _HSR_DIS_MASK 0x80 /* DSR input inactive error mask */
113 #define _HSR_CS_MASK 0x40 /* CTS input inactive error mask */
114 #define _HSR_DIS_ACT 0x00 /* dsr input is active */
115 #define _HSR_DIS_INACT _HSR_DIS_MASK /* dsr input is inactive */
116 #define _HSR_CS_ACT 0x00 /* cts input is active */
117 #define _HSR_CS_INACT _HSR_CS_MASK /* cts input is active */
118
119 /* serial port line status register */
120
121 #define _LSR_RBR_MASK 0x80 /* receive buffer ready mask */
122 #define _LSR_FE_MASK 0x40 /* framing error */
123 #define _LSR_OE_MASK 0x20 /* overrun error */
124 #define _LSR_PE_MASK 0x10 /* parity error */
125 #define _LSR_LB_MASK 0x08 /* line break */
126 #define _LSR_TBR_MASK 0x04 /* transmit buffer ready */
127 #define _LSR_TSR_MASK 0x02 /* transmit shift register ready */
128
129 #define _LSR_RBR_FULL _LSR_RBR_MASK /* receive buffer is full */
130 #define _LSR_FE_ERROR _LSR_FE_MASK /* framing error detected */
131 #define _LSR_OE_ERROR _LSR_OE_MASK /* overrun error detected */
132 #define _LSR_PE_ERROR _LSR_PE_MASK /* parity error detected */
133 #define _LSR_LB_BREAK _LSR_LB_MASK /* line break detected */
134 #define _LSR_TBR_EMPTY _LSR_TBR_MASK /* transmit buffer is ready */
135 #define _LSR_TSR_EMPTY _LSR_TSR_MASK /* transmit shift register is empty */
136 #define _LSR_TX_ALL 0x06 /* all physical transmit is done */
137
138 #define _LSR_RX_ERR (_LSR_LB_BREAK | _LSR_FE_MASK | _LSR_OE_MASK | \
139 _LSR_PE_MASK )
140
141 /* serial port receiver command register */
142
143 #define _RCR_ER_MASK 0x80 /* enable receiver mask */
144 #define _RCR_DME_MASK 0x60 /* dma mode */
145 #define _RCR_EIE_MASK 0x10 /* error interrupt enable mask */
146 #define _RCR_PME_MASK 0x08 /* pause mode mask */
147
148 #define _RCR_ER_ENABLE _RCR_ER_MASK /* receiver enabled */
149 #define _RCR_DME_DISABLE 0x00 /* dma disabled */
150 #define _RCR_DME_RXRDY 0x20 /* dma disabled, RxRDY interrupt enabled*/
151 #define _RCR_DME_ENABLE2 0x40 /* dma enabled,receiver src channel 2 */
152 #define _RCR_DME_ENABLE3 0x60 /* dma enabled,receiver src channel 3 */
153 #define _RCR_PME_HARD _RCR_PME_MASK /* RTS controlled by hardware */
154 #define _RCR_PME_SOFT 0x00 /* RTS controlled by software */
155
156 /* serial port transmit command register */
157
158 #define _TxCR_ET_MASK 0x80 /* transmitter enable mask */
159 #define _TxCR_DME_MASK 0x60 /* dma mode mask */
160 #define _TxCR_TIE_MASK 0x10 /* empty interrupt enable mask */
161 #define _TxCR_EIE_MASK 0x08 /* error interrupt enable mask */
162 #define _TxCR_SPE_MASK 0x04 /* stop/pause mask */
163 #define _TxCR_TB_MASK 0x02 /* transmit break mask */
164
165 #define _TxCR_ET_ENABLE _TxCR_ET_MASK /* transmitter enabled */
166 #define _TxCR_DME_DISABLE 0x00 /* transmitter disabled, TBR intr disabled */
167 #define _TxCR_DME_TBR 0x20 /* transmitter disabled, TBR intr enabled */
168 #define _TxCR_DME_CHAN_2 0x40 /* dma enabled, destination chann 2 */
169 #define _TxCR_DME_CHAN_3 0x60 /* dma enabled, destination chann 3 */
170
171 /* serial ctl reg 2 - added for Vesta */
172
173 #define _CTL2_EXTERN 0x80 /* */
174 #define _CTL2_USEFIFO 0x40 /* */
175 #define _CTL2_RESETRF 0x08 /* */
176 #define _CTL2_RESETTF 0x04 /* */
177
178
179
180 #define SERIAL_SICC_NAME "ttySICC"
181 #define SERIAL_SICC_MAJOR 150
182 #define SERIAL_SICC_MINOR 1
183 #define SERIAL_SICC_NR 1
184
185 #ifndef TRUE
186 #define TRUE 1
187 #endif
188 #ifndef FALSE
189 #define FALSE 0
190 #endif
191
192 /*
193 * Things needed by tty driver
194 */
195 static struct tty_driver *siccnormal_driver;
196
197 #if defined(CONFIG_SERIAL_SICC_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
198 #define SUPPORT_SYSRQ
199 #endif
200
201 /*
202 * Things needed internally to this driver
203 */
204
205 /*
206 * tmp_buf is used as a temporary buffer by serial_write. We need to
207 * lock it in case the copy_from_user blocks while swapping in a page,
208 * and some other program tries to do a serial write at the same time.
209 * Since the lock will only come under contention when the system is
210 * swapping and available memory is low, it makes sense to share one
211 * buffer across all the serial ports, since it significantly saves
212 * memory if large numbers of serial ports are open.
213 */
214 static u_char *tmp_buf;
215
216 #define HIGH_BITS_OFFSET ((sizeof(long)-sizeof(int))*8)
217
218 /* number of characters left in xmit buffer before we ask for more */
219 #define WAKEUP_CHARS 256
220 #define SICC_ISR_PASS_LIMIT 256
221
222 #define EVT_WRITE_WAKEUP 0
223
224 struct SICC_icount {
225 __u32 cts;
226 __u32 dsr;
227 __u32 rng;
228 __u32 dcd;
229 __u32 rx;
230 __u32 tx;
231 __u32 frame;
232 __u32 overrun;
233 __u32 parity;
234 __u32 brk;
235 __u32 buf_overrun;
236 };
237
238 /*
239 * Static information about the port
240 */
241 struct SICC_port {
242 unsigned int uart_base;
243 unsigned int uart_base_phys;
244 unsigned int irqrx;
245 unsigned int irqtx;
246 unsigned int uartclk;
247 unsigned int fifosize;
248 unsigned int tiocm_support;
249 void (*set_mctrl)(struct SICC_port *, u_int mctrl);
250 };
251
252 /*
253 * This is the state information which is persistent across opens
254 */
255 struct SICC_state {
256 struct SICC_icount icount;
257 unsigned int line;
258 unsigned int close_delay;
259 unsigned int closing_wait;
260 unsigned int custom_divisor;
261 unsigned int flags;
262 int count;
263 struct SICC_info *info;
264 spinlock_t sicc_lock;
265 };
266
267 #define SICC_XMIT_SIZE 1024
268 /*
269 * This is the state information which is only valid when the port is open.
270 */
271 struct SICC_info {
272 struct SICC_port *port;
273 struct SICC_state *state;
274 struct tty_struct *tty;
275 unsigned char x_char;
276 unsigned char old_status;
277 unsigned char read_status_mask;
278 unsigned char ignore_status_mask;
279 struct circ_buf xmit;
280 unsigned int flags;
281 #ifdef SUPPORT_SYSRQ
282 unsigned long sysrq;
283 #endif
284
285 unsigned int event;
286 unsigned int timeout;
287 unsigned int lcr_h;
288 unsigned int mctrl;
289 int blocked_open;
290
291 struct tasklet_struct tlet;
292
293 wait_queue_head_t open_wait;
294 wait_queue_head_t close_wait;
295 wait_queue_head_t delta_msr_wait;
296 };
297
298 #ifdef CONFIG_SERIAL_SICC_CONSOLE
299 static struct console siccuart_cons;
300 #endif
301 static void siccuart_change_speed(struct SICC_info *info, struct termios *old_termios);
302 static void siccuart_wait_until_sent(struct tty_struct *tty, int timeout);
303
304
305
306 static void powerpcMtcic_cr(unsigned long value)
307 {
308 mtdcr(DCRN_CICCR, value);
309 }
310
311 static unsigned long powerpcMfcic_cr(void)
312 {
313 return mfdcr(DCRN_CICCR);
314 }
315
316 static unsigned long powerpcMfclkgpcr(void)
317 {
318 return mfdcr(DCRN_SCCR);
319 }
320
321 static void sicc_set_mctrl_null(struct SICC_port *port, u_int mctrl)
322 {
323 }
324
325 static struct SICC_port sicc_ports[SERIAL_SICC_NR] = {
326 {
327 .uart_base = 0,
328 .uart_base_phys = SICC0_IO_BASE,
329 .irqrx = SICC0_INTRX,
330 .irqtx = SICC0_INTTX,
331 // .uartclk = 0,
332 .fifosize = 1,
333 .set_mctrl = sicc_set_mctrl_null,
334 }
335 };
336
337 static struct SICC_state sicc_state[SERIAL_SICC_NR];
338
339 static void siccuart_enable_rx_interrupt(struct SICC_info *info)
340 {
341 unsigned char cr;
342
343 cr = readb(info->port->uart_base+BL_SICC_RCR);
344 cr &= ~_RCR_DME_MASK;
345 cr |= _RCR_DME_RXRDY;
346 writeb(cr, info->port->uart_base+BL_SICC_RCR);
347 }
348
349 static void siccuart_disable_rx_interrupt(struct SICC_info *info)
350 {
351 unsigned char cr;
352
353 cr = readb(info->port->uart_base+BL_SICC_RCR);
354 cr &= ~_RCR_DME_MASK;
355 cr |= _RCR_DME_DISABLE;
356 writeb(cr, info->port->uart_base+BL_SICC_RCR);
357 }
358
359
360 static void siccuart_enable_tx_interrupt(struct SICC_info *info)
361 {
362 unsigned char cr;
363
364 cr = readb(info->port->uart_base+BL_SICC_TxCR);
365 cr &= ~_TxCR_DME_MASK;
366 cr |= _TxCR_DME_TBR;
367 writeb(cr, info->port->uart_base+BL_SICC_TxCR);
368 }
369
370 static void siccuart_disable_tx_interrupt(struct SICC_info *info)
371 {
372 unsigned char cr;
373
374 cr = readb(info->port->uart_base+BL_SICC_TxCR);
375 cr &= ~_TxCR_DME_MASK;
376 cr |= _TxCR_DME_DISABLE;
377 writeb(cr, info->port->uart_base+BL_SICC_TxCR);
378 }
379
380
381 static void siccuart_stop(struct tty_struct *tty)
382 {
383 struct SICC_info *info = tty->driver_data;
384 unsigned long flags;
385
386 /* disable interrupts while stopping serial port interrupts */
387 spin_lock_irqsave(&info->state->sicc_lock,flags);
388 siccuart_disable_tx_interrupt(info);
389 spin_unlock_irqrestore(&info->state->sicc_lock,flags);
390 }
391
392 static void siccuart_start(struct tty_struct *tty)
393 {
394 struct SICC_info *info = tty->driver_data;
395 unsigned long flags;
396
397 /* disable interrupts while starting serial port interrupts */
398 spin_lock_irqsave(&info->state->sicc_lock,flags);
399 if (info->xmit.head != info->xmit.tail
400 && info->xmit.buf)
401 siccuart_enable_tx_interrupt(info);
402 spin_unlock_irqrestore(&info->state->sicc_lock,flags);
403 }
404
405
406 /*
407 * This routine is used by the interrupt handler to schedule
408 * processing in the software interrupt portion of the driver.
409 */
410 static void siccuart_event(struct SICC_info *info, int event)
411 {
412 info->event |= 1 << event;
413 tasklet_schedule(&info->tlet);
414 }
415
416 static void
417 siccuart_rx_chars(struct SICC_info *info)
418 {
419 struct tty_struct *tty = info->tty;
420 unsigned int status, ch, rsr, flg, ignored = 0;
421 struct SICC_icount *icount = &info->state->icount;
422 struct SICC_port *port = info->port;
423
424 status = readb(port->uart_base+BL_SICC_LSR );
425 while (status & _LSR_RBR_FULL) {
426 ch = readb(port->uart_base+BL_SICC_RBR);
427
428 if (tty->flip.count >= TTY_FLIPBUF_SIZE)
429 goto ignore_char;
430 icount->rx++;
431
432 flg = TTY_NORMAL;
433
434 /*
435 * Note that the error handling code is
436 * out of the main execution path
437 */
438 rsr = readb(port->uart_base+BL_SICC_LSR);
439 if (rsr & _LSR_RX_ERR)
440 goto handle_error;
441 #ifdef SUPPORT_SYSRQ
442 if (info->sysrq) {
443 if (ch && time_before(jiffies, info->sysrq)) {
444 handle_sysrq(ch, NULL);
445 info->sysrq = 0;
446 goto ignore_char;
447 }
448 info->sysrq = 0;
449 }
450 #endif
451 error_return:
452 *tty->flip.flag_buf_ptr++ = flg;
453 *tty->flip.char_buf_ptr++ = ch;
454 tty->flip.count++;
455 ignore_char:
456 status = readb(port->uart_base+BL_SICC_LSR );
457 }
458 out:
459 tty_flip_buffer_push(tty);
460 return;
461
462 handle_error:
463 if (rsr & _LSR_LB_BREAK) {
464 rsr &= ~(_LSR_FE_MASK | _LSR_PE_MASK);
465 icount->brk++;
466
467 #ifdef SUPPORT_SYSRQ
468 if (info->state->line == siccuart_cons.index) {
469 if (!info->sysrq) {
470 info->sysrq = jiffies + HZ*5;
471 goto ignore_char;
472 }
473 }
474 #endif
475 } else if (rsr & _LSR_PE_MASK)
476 icount->parity++;
477 else if (rsr & _LSR_FE_MASK)
478 icount->frame++;
479 if (rsr & _LSR_OE_MASK)
480 icount->overrun++;
481
482 if (rsr & info->ignore_status_mask) {
483 if (++ignored > 100)
484 goto out;
485 goto ignore_char;
486 }
487 rsr &= info->read_status_mask;
488
489 if (rsr & _LSR_LB_BREAK)
490 flg = TTY_BREAK;
491 else if (rsr & _LSR_PE_MASK)
492 flg = TTY_PARITY;
493 else if (rsr & _LSR_FE_MASK)
494 flg = TTY_FRAME;
495
496 if (rsr & _LSR_OE_MASK) {
497 /*
498 * CHECK: does overrun affect the current character?
499 * ASSUMPTION: it does not.
500 */
501 *tty->flip.flag_buf_ptr++ = flg;
502 *tty->flip.char_buf_ptr++ = ch;
503 tty->flip.count++;
504 if (tty->flip.count >= TTY_FLIPBUF_SIZE)
505 goto ignore_char;
506 ch = 0;
507 flg = TTY_OVERRUN;
508 }
509 #ifdef SUPPORT_SYSRQ
510 info->sysrq = 0;
511 #endif
512 goto error_return;
513 }
514
515 static void siccuart_tx_chars(struct SICC_info *info)
516 {
517 struct SICC_port *port = info->port;
518 int count;
519 unsigned char status;
520
521
522 if (info->x_char) {
523 writeb(info->x_char, port->uart_base+ BL_SICC_TBR);
524 info->state->icount.tx++;
525 info->x_char = 0;
526 return;
527 }
528 if (info->xmit.head == info->xmit.tail
529 || info->tty->stopped
530 || info->tty->hw_stopped) {
531 siccuart_disable_tx_interrupt(info);
532 writeb(status&(~_LSR_RBR_MASK),port->uart_base+BL_SICC_LSR);
533 return;
534 }
535
536 count = port->fifosize;
537 do {
538 writeb(info->xmit.buf[info->xmit.tail], port->uart_base+ BL_SICC_TBR);
539 info->xmit.tail = (info->xmit.tail + 1) & (SICC_XMIT_SIZE - 1);
540 info->state->icount.tx++;
541 if (info->xmit.head == info->xmit.tail)
542 break;
543 } while (--count > 0);
544
545 if (CIRC_CNT(info->xmit.head,
546 info->xmit.tail,
547 SICC_XMIT_SIZE) < WAKEUP_CHARS)
548 siccuart_event(info, EVT_WRITE_WAKEUP);
549
550 if (info->xmit.head == info->xmit.tail) {
551 siccuart_disable_tx_interrupt(info);
552 }
553 }
554
555
556 static irqreturn_t siccuart_int_rx(int irq, void *dev_id)
557 {
558 struct SICC_info *info = dev_id;
559 siccuart_rx_chars(info)
560 return IRQ_HANDLED;
561 }
562
563
564 static irqreturn_t siccuart_int_tx(int irq, void *dev_id)
565 {
566 struct SICC_info *info = dev_id;
567 siccuart_tx_chars(info);
568 return IRQ_HANDLED;
569 }
570
571 static void siccuart_tasklet_action(unsigned long data)
572 {
573 struct SICC_info *info = (struct SICC_info *)data;
574 struct tty_struct *tty;
575
576 tty = info->tty;
577 if (!tty || !test_and_clear_bit(EVT_WRITE_WAKEUP, &info->event))
578 return;
579
580 if ((tty->flags & (1 << TTY_DO_WRITE_WAKEUP)) &&
581 tty->ldisc.write_wakeup)
582 (tty->ldisc.write_wakeup)(tty);
583 wake_up_interruptible(&tty->write_wait);
584 }
585
586 static int siccuart_startup(struct SICC_info *info)
587 {
588 unsigned long flags;
589 unsigned long page;
590 int retval = 0;
591
592 if (info->flags & ASYNC_INITIALIZED) {
593 return 0;
594 }
595
596 page = get_zeroed_page(GFP_KERNEL);
597 if (!page)
598 return -ENOMEM;
599
600 if (info->port->uart_base == 0)
601 info->port->uart_base = (int)ioremap(info->port->uart_base_phys, PAGE_SIZE);
602 if (info->port->uart_base == 0) {
603 free_page(page);
604 return -ENOMEM;
605 }
606
607 /* lock access to info while doing setup */
608 spin_lock_irqsave(&info->state->sicc_lock,flags);
609
610 if (info->xmit.buf)
611 free_page(page);
612 else
613 info->xmit.buf = (unsigned char *) page;
614
615
616 info->mctrl = 0;
617 if (info->tty->termios->c_cflag & CBAUD)
618 info->mctrl = TIOCM_RTS | TIOCM_DTR;
619 info->port->set_mctrl(info->port, info->mctrl);
620
621 /*
622 * initialise the old status of the modem signals
623 */
624 info->old_status = 0; // UART_GET_FR(info->port) & AMBA_UARTFR_MODEM_ANY;
625
626
627 if (info->tty)
628 clear_bit(TTY_IO_ERROR, &info->tty->flags);
629 info->xmit.head = info->xmit.tail = 0;
630
631 /*
632 * Set up the tty->alt_speed kludge
633 */
634 if (info->tty) {
635 if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI)
636 info->tty->alt_speed = 57600;
637 if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI)
638 info->tty->alt_speed = 115200;
639 if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_SHI)
640 info->tty->alt_speed = 230400;
641 if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_WARP)
642 info->tty->alt_speed = 460800;
643 }
644
645
646 writeb( 0x00, info->port->uart_base + BL_SICC_IrCR ); // disable IrDA
647
648
649 /*
650 * and set the speed of the serial port
651 */
652 siccuart_change_speed(info, 0);
653
654 // enable rx/tx ports
655 writeb(_RCR_ER_ENABLE /*| _RCR_PME_HARD*/, info->port->uart_base + BL_SICC_RCR);
656 writeb(_TxCR_ET_ENABLE , info->port->uart_base + BL_SICC_TxCR);
657
658 readb(info->port->uart_base + BL_SICC_RBR); // clear rx port
659
660 writeb(0xf8, info->port->uart_base + BL_SICC_LSR); /* reset bits 0-4 of LSR */
661
662 /*
663 * Finally, enable interrupts
664 */
665
666 /*
667 * Allocate the IRQ
668 */
669 retval = request_irq(info->port->irqrx, siccuart_int_rx, 0, "SICC rx", info);
670 if (retval) {
671 if (capable(CAP_SYS_ADMIN)) {
672 if (info->tty)
673 set_bit(TTY_IO_ERROR, &info->tty->flags);
674 retval = 0;
675 }
676 goto errout;
677 }
678 retval = request_irq(info->port->irqtx, siccuart_int_tx, 0, "SICC tx", info);
679 if (retval) {
680 if (capable(CAP_SYS_ADMIN)) {
681 if (info->tty)
682 set_bit(TTY_IO_ERROR, &info->tty->flags);
683 retval = 0;
684 }
685 free_irq(info->port->irqrx, info);
686 goto errout;
687 }
688
689 siccuart_enable_rx_interrupt(info);
690
691 info->flags |= ASYNC_INITIALIZED;
692 spin_unlock_irqrestore(&info->state->sicc_lock,flags);
693 return 0;
694
695
696 errout:
697 spin_unlock_irqrestore(&info->state->sicc_lock,flags);
698 return retval;
699 }
700
701 /*
702 * This routine will shutdown a serial port; interrupts are disabled, and
703 * DTR is dropped if the hangup on close termio flag is on.
704 */
705 static void siccuart_shutdown(struct SICC_info *info)
706 {
707 unsigned long flags;
708
709 if (!(info->flags & ASYNC_INITIALIZED))
710 return;
711
712 /* lock while shutting down port */
713 spin_lock_irqsave(&info->state->sicc_lock,flags); /* Disable interrupts */
714
715 /*
716 * clear delta_msr_wait queue to avoid mem leaks: we may free the irq
717 * here so the queue might never be woken up
718 */
719 wake_up_interruptible(&info->delta_msr_wait);
720
721 /*
722 * disable all interrupts, disable the port
723 */
724 siccuart_disable_rx_interrupt(info);
725 siccuart_disable_tx_interrupt(info);
726
727 /*
728 * Free the IRQ
729 */
730 free_irq(info->port->irqtx, info);
731 free_irq(info->port->irqrx, info);
732
733 if (info->xmit.buf) {
734 unsigned long pg = (unsigned long) info->xmit.buf;
735 info->xmit.buf = NULL;
736 free_page(pg);
737 }
738
739
740 if (!info->tty || (info->tty->termios->c_cflag & HUPCL))
741 info->mctrl &= ~(TIOCM_DTR|TIOCM_RTS);
742 info->port->set_mctrl(info->port, info->mctrl);
743
744 /* kill off our tasklet */
745 tasklet_kill(&info->tlet);
746 if (info->tty)
747 set_bit(TTY_IO_ERROR, &info->tty->flags);
748
749 info->flags &= ~ASYNC_INITIALIZED;
750
751 spin_unlock_irqrestore(&info->state->sicc_lock,flags);
752 }
753
754
755 static void siccuart_change_speed(struct SICC_info *info, struct termios *old_termios)
756 {
757 unsigned int lcr_h, baud, quot, cflag, old_rcr, old_tcr, bits;
758 unsigned long flags;
759
760 if (!info->tty || !info->tty->termios)
761 return;
762
763 cflag = info->tty->termios->c_cflag;
764
765 pr_debug("siccuart_set_cflag(0x%x) called\n", cflag);
766 /* byte size and parity */
767 switch (cflag & CSIZE) {
768 case CS7: lcr_h = _LCR_PE_DISABLE | _LCR_DB_7_BITS | _LCR_SB_1_BIT; bits = 9; break;
769 default: lcr_h = _LCR_PE_DISABLE | _LCR_DB_8_BITS | _LCR_SB_1_BIT; bits = 10; break; // CS8
770 }
771 if (cflag & CSTOPB) {
772 lcr_h |= _LCR_SB_2_BIT;
773 bits ++;
774 }
775 if (cflag & PARENB) {
776 lcr_h |= _LCR_PE_ENABLE;
777 bits++;
778 if (!(cflag & PARODD))
779 lcr_h |= _LCR_PTY_ODD;
780 else
781 lcr_h |= _LCR_PTY_EVEN;
782 }
783
784 do {
785 /* Determine divisor based on baud rate */
786 baud = tty_get_baud_rate(info->tty);
787 if (!baud)
788 baud = 9600;
789
790
791 {
792 // here is ppc403SetBaud(com_port, baud);
793 unsigned long divisor, clockSource, temp;
794
795 /* Ensure CICCR[7] is 0 to select Internal Baud Clock */
796 powerpcMtcic_cr((unsigned long)(powerpcMfcic_cr() & 0xFEFFFFFF));
797
798 /* Determine Internal Baud Clock Frequency */
799 /* powerpcMfclkgpcr() reads DCR 0x120 - the*/
800 /* SCCR (Serial Clock Control Register) on Vesta */
801 temp = powerpcMfclkgpcr();
802
803 if(temp & 0x00000080) {
804 clockSource = 324000000;
805 }
806 else {
807 clockSource = 216000000;
808 }
809 clockSource = clockSource/(unsigned long)((temp&0x00FC0000)>>18);
810 divisor = clockSource/(16*baud) - 1;
811 /* divisor has only 12 bits of resolution */
812 if(divisor>0x00000FFF){
813 divisor=0x00000FFF;
814 }
815
816 quot = divisor;
817 }
818
819 if (baud == 38400 &&
820 ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_CUST))
821 quot = info->state->custom_divisor;
822
823 if (!quot && old_termios) {
824 info->tty->termios->c_cflag &= ~CBAUD;
825 info->tty->termios->c_cflag |= (old_termios->c_cflag & CBAUD);
826 old_termios = NULL;
827 }
828 } while (quot == 0 && old_termios);
829
830 /* As a last resort, if the quotient is zero, default to 9600 bps */
831 if (!quot)
832 quot = (info->port->uartclk / (16 * 9600)) - 1;
833
834 info->timeout = info->port->fifosize * HZ * bits / baud;
835 info->timeout += HZ/50; /* Add .02 seconds of slop */
836
837 if (cflag & CRTSCTS)
838 info->flags |= ASYNC_CTS_FLOW;
839 else
840 info->flags &= ~ASYNC_CTS_FLOW;
841 if (cflag & CLOCAL)
842 info->flags &= ~ASYNC_CHECK_CD;
843 else
844 info->flags |= ASYNC_CHECK_CD;
845
846 /*
847 * Set up parity check flag
848 */
849 #define RELEVENT_IFLAG(iflag) ((iflag) & (IGNBRK|BRKINT|IGNPAR|PARMRK|INPCK))
850
851 info->read_status_mask = _LSR_OE_MASK;
852 if (I_INPCK(info->tty))
853 info->read_status_mask |= _LSR_FE_MASK | _LSR_PE_MASK;
854 if (I_BRKINT(info->tty) || I_PARMRK(info->tty))
855 info->read_status_mask |= _LSR_LB_MASK;
856
857 /*
858 * Characters to ignore
859 */
860 info->ignore_status_mask = 0;
861 if (I_IGNPAR(info->tty))
862 info->ignore_status_mask |= _LSR_FE_MASK | _LSR_PE_MASK;
863 if (I_IGNBRK(info->tty)) {
864 info->ignore_status_mask |= _LSR_LB_MASK;
865 /*
866 * If we're ignoring parity and break indicators,
867 * ignore overruns to (for real raw support).
868 */
869 if (I_IGNPAR(info->tty))
870 info->ignore_status_mask |= _LSR_OE_MASK;
871 }
872
873 /* disable interrupts while reading and clearing registers */
874 spin_lock_irqsave(&info->state->sicc_lock,flags);
875
876 old_rcr = readb(info->port->uart_base + BL_SICC_RCR);
877 old_tcr = readb(info->port->uart_base + BL_SICC_TxCR);
878
879
880 writeb(0, info->port->uart_base + BL_SICC_RCR);
881 writeb(0, info->port->uart_base + BL_SICC_TxCR);
882
883 /*RLBtrace (&ppc403Chan0, 0x2000000c, 0, 0);*/
884
885
886 spin_unlock_irqrestore(&info->state->sicc_lock,flags);
887
888
889 /* Set baud rate */
890 writeb((quot & 0x00000F00)>>8, info->port->uart_base + BL_SICC_BRDH );
891 writeb( quot & 0x00000FF, info->port->uart_base + BL_SICC_BRDL );
892
893 /* Set CTL2 reg to use external clock (ExtClk) and enable FIFOs. */
894 /* For now, do NOT use FIFOs since 403 UART did not have this */
895 /* capability and this driver was inherited from 403UART. */
896 writeb(_CTL2_EXTERN, info->port->uart_base + BL_SICC_CTL2);
897
898 writeb(lcr_h, info->port->uart_base + BL_SICC_LCR);
899
900 writeb(old_rcr, info->port->uart_base + BL_SICC_RCR); // restore rcr
901 writeb(old_tcr, info->port->uart_base + BL_SICC_TxCR); // restore txcr
902
903 }
904
905
906 static void siccuart_put_char(struct tty_struct *tty, u_char ch)
907 {
908 struct SICC_info *info = tty->driver_data;
909 unsigned long flags;
910
911 if (!tty || !info->xmit.buf)
912 return;
913
914 /* lock info->xmit while adding character to tx buffer */
915 spin_lock_irqsave(&info->state->sicc_lock,flags);
916 if (CIRC_SPACE(info->xmit.head, info->xmit.tail, SICC_XMIT_SIZE) != 0) {
917 info->xmit.buf[info->xmit.head] = ch;
918 info->xmit.head = (info->xmit.head + 1) & (SICC_XMIT_SIZE - 1);
919 }
920 spin_unlock_irqrestore(&info->state->sicc_lock,flags);
921 }
922
923 static void siccuart_flush_chars(struct tty_struct *tty)
924 {
925 struct SICC_info *info = tty->driver_data;
926 unsigned long flags;
927
928 if (info->xmit.head == info->xmit.tail
929 || tty->stopped
930 || tty->hw_stopped
931 || !info->xmit.buf)
932 return;
933
934 /* disable interrupts while transmitting characters */
935 spin_lock_irqsave(&info->state->sicc_lock,flags);
936 siccuart_enable_tx_interrupt(info);
937 spin_unlock_irqrestore(&info->state->sicc_lock,flags);
938 }
939
940 static int siccuart_write(struct tty_struct *tty,
941 const u_char * buf, int count)
942 {
943 struct SICC_info *info = tty->driver_data;
944 unsigned long flags;
945 int c, ret = 0;
946
947 if (!tty || !info->xmit.buf || !tmp_buf)
948 return 0;
949
950 /* lock info->xmit while removing characters from buffer */
951 spin_lock_irqsave(&info->state->sicc_lock,flags);
952 while (1) {
953 c = CIRC_SPACE_TO_END(info->xmit.head,
954 info->xmit.tail,
955 SICC_XMIT_SIZE);
956 if (count < c)
957 c = count;
958 if (c <= 0)
959 break;
960 memcpy(info->xmit.buf + info->xmit.head, buf, c);
961 info->xmit.head = (info->xmit.head + c) &
962 (SICC_XMIT_SIZE - 1);
963 buf += c;
964 count -= c;
965 ret += c;
966 }
967 if (info->xmit.head != info->xmit.tail
968 && !tty->stopped
969 && !tty->hw_stopped)
970 siccuart_enable_tx_interrupt(info);
971 spin_unlock_irqrestore(&info->state->sicc_lock,flags);
972 return ret;
973 }
974
975 static int siccuart_write_room(struct tty_struct *tty)
976 {
977 struct SICC_info *info = tty->driver_data;
978
979 return CIRC_SPACE(info->xmit.head, info->xmit.tail, SICC_XMIT_SIZE);
980 }
981
982 static int siccuart_chars_in_buffer(struct tty_struct *tty)
983 {
984 struct SICC_info *info = tty->driver_data;
985
986 return CIRC_CNT(info->xmit.head, info->xmit.tail, SICC_XMIT_SIZE);
987 }
988
989 static void siccuart_flush_buffer(struct tty_struct *tty)
990 {
991 struct SICC_info *info = tty->driver_data;
992 unsigned long flags;
993
994 pr_debug("siccuart_flush_buffer(%d) called\n", tty->index);
995 /* lock info->xmit while zeroing buffer counts */
996 spin_lock_irqsave(&info->state->sicc_lock,flags);
997 info->xmit.head = info->xmit.tail = 0;
998 spin_unlock_irqrestore(&info->state->sicc_lock,flags);
999 wake_up_interruptible(&tty->write_wait);
1000 if ((tty->flags & (1 << TTY_DO_WRITE_WAKEUP)) &&
1001 tty->ldisc.write_wakeup)
1002 (tty->ldisc.write_wakeup)(tty);
1003 }
1004
1005 /*
1006 * This function is used to send a high-priority XON/XOFF character to
1007 * the device
1008 */
1009 static void siccuart_send_xchar(struct tty_struct *tty, char ch)
1010 {
1011 struct SICC_info *info = tty->driver_data;
1012
1013 info->x_char = ch;
1014 if (ch)
1015 siccuart_enable_tx_interrupt(info);
1016 }
1017
1018 static void siccuart_throttle(struct tty_struct *tty)
1019 {
1020 struct SICC_info *info = tty->driver_data;
1021 unsigned long flags;
1022
1023 if (I_IXOFF(tty))
1024 siccuart_send_xchar(tty, STOP_CHAR(tty));
1025
1026 if (tty->termios->c_cflag & CRTSCTS) {
1027 /* disable interrupts while setting modem control lines */
1028 spin_lock_irqsave(&info->state->sicc_lock,flags);
1029 info->mctrl &= ~TIOCM_RTS;
1030 info->port->set_mctrl(info->port, info->mctrl);
1031 spin_unlock_irqrestore(&info->state->sicc_lock,flags);
1032 }
1033 }
1034
1035 static void siccuart_unthrottle(struct tty_struct *tty)
1036 {
1037 struct SICC_info *info = (struct SICC_info *) tty->driver_data;
1038 unsigned long flags;
1039
1040 if (I_IXOFF(tty)) {
1041 if (info->x_char)
1042 info->x_char = 0;
1043 else
1044 siccuart_send_xchar(tty, START_CHAR(tty));
1045 }
1046
1047 if (tty->termios->c_cflag & CRTSCTS) {
1048 /* disable interrupts while setting modem control lines */
1049 spin_lock_irqsave(&info->state->sicc_lock,flags);
1050 info->mctrl |= TIOCM_RTS;
1051 info->port->set_mctrl(info->port, info->mctrl);
1052 spin_unlock_irqrestore(&info->state->sicc_lock,flags);
1053 }
1054 }
1055
1056 static int get_serial_info(struct SICC_info *info, struct serial_struct *retinfo)
1057 {
1058 struct SICC_state *state = info->state;
1059 struct SICC_port *port = info->port;
1060 struct serial_struct tmp;
1061
1062 memset(&tmp, 0, sizeof(tmp));
1063 tmp.type = 0;
1064 tmp.line = state->line;
1065 tmp.port = port->uart_base;
1066 if (HIGH_BITS_OFFSET)
1067 tmp.port_high = port->uart_base >> HIGH_BITS_OFFSET;
1068 tmp.irq = port->irqrx;
1069 tmp.flags = 0;
1070 tmp.xmit_fifo_size = port->fifosize;
1071 tmp.baud_base = port->uartclk / 16;
1072 tmp.close_delay = state->close_delay;
1073 tmp.closing_wait = state->closing_wait;
1074 tmp.custom_divisor = state->custom_divisor;
1075
1076 if (copy_to_user(retinfo, &tmp, sizeof(*retinfo)))
1077 return -EFAULT;
1078 return 0;
1079 }
1080
1081 static int set_serial_info(struct SICC_info *info,
1082 struct serial_struct *newinfo)
1083 {
1084 struct serial_struct new_serial;
1085 struct SICC_state *state, old_state;
1086 struct SICC_port *port;
1087 unsigned long new_port;
1088 unsigned int i, change_irq, change_port;
1089 int retval = 0;
1090
1091 if (copy_from_user(&new_serial, newinfo, sizeof(new_serial)))
1092 return -EFAULT;
1093
1094 state = info->state;
1095 old_state = *state;
1096 port = info->port;
1097
1098 new_port = new_serial.port;
1099 if (HIGH_BITS_OFFSET)
1100 new_port += (unsigned long) new_serial.port_high << HIGH_BITS_OFFSET;
1101
1102 change_irq = new_serial.irq != port->irqrx;
1103 change_port = new_port != port->uart_base;
1104
1105 if (!capable(CAP_SYS_ADMIN)) {
1106 if (change_irq || change_port ||
1107 (new_serial.baud_base != port->uartclk / 16) ||
1108 (new_serial.close_delay != state->close_delay) ||
1109 (new_serial.xmit_fifo_size != port->fifosize) ||
1110 ((new_serial.flags & ~ASYNC_USR_MASK) !=
1111 (state->flags & ~ASYNC_USR_MASK)))
1112 return -EPERM;
1113 state->flags = ((state->flags & ~ASYNC_USR_MASK) |
1114 (new_serial.flags & ASYNC_USR_MASK));
1115 info->flags = ((info->flags & ~ASYNC_USR_MASK) |
1116 (new_serial.flags & ASYNC_USR_MASK));
1117 state->custom_divisor = new_serial.custom_divisor;
1118 goto check_and_exit;
1119 }
1120
1121 if ((new_serial.irq >= NR_IRQS) || (new_serial.irq < 0) ||
1122 (new_serial.baud_base < 9600))
1123 return -EINVAL;
1124
1125 if (new_serial.type && change_port) {
1126 for (i = 0; i < SERIAL_SICC_NR; i++)
1127 if ((port != sicc_ports + i) &&
1128 sicc_ports[i].uart_base != new_port)
1129 return -EADDRINUSE;
1130 }
1131
1132 if ((change_port || change_irq) && (state->count > 1))
1133 return -EBUSY;
1134
1135 /*
1136 * OK, past this point, all the error checking has been done.
1137 * At this point, we start making changes.....
1138 */
1139 port->uartclk = new_serial.baud_base * 16;
1140 state->flags = ((state->flags & ~ASYNC_FLAGS) |
1141 (new_serial.flags & ASYNC_FLAGS));
1142 info->flags = ((state->flags & ~ASYNC_INTERNAL_FLAGS) |
1143 (info->flags & ASYNC_INTERNAL_FLAGS));
1144 state->custom_divisor = new_serial.custom_divisor;
1145 state->close_delay = msecs_to_jiffies(10 * new_serial.close_delay);
1146 state->closing_wait = msecs_to_jiffies(10 * new_serial.closing_wait);
1147 info->tty->low_latency = (info->flags & ASYNC_LOW_LATENCY) ? 1 : 0;
1148 port->fifosize = new_serial.xmit_fifo_size;
1149
1150 if (change_port || change_irq) {
1151 /*
1152 * We need to shutdown the serial port at the old
1153 * port/irq combination.
1154 */
1155 siccuart_shutdown(info);
1156 port->irqrx = new_serial.irq;
1157 port->uart_base = new_port;
1158 }
1159
1160 check_and_exit:
1161 if (!port->uart_base)
1162 return 0;
1163 if (info->flags & ASYNC_INITIALIZED) {
1164 if ((old_state.flags & ASYNC_SPD_MASK) !=
1165 (state->flags & ASYNC_SPD_MASK) ||
1166 (old_state.custom_divisor != state->custom_divisor)) {
1167 if ((state->flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI)
1168 info->tty->alt_speed = 57600;
1169 if ((state->flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI)
1170 info->tty->alt_speed = 115200;
1171 if ((state->flags & ASYNC_SPD_MASK) == ASYNC_SPD_SHI)
1172 info->tty->alt_speed = 230400;
1173 if ((state->flags & ASYNC_SPD_MASK) == ASYNC_SPD_WARP)
1174 info->tty->alt_speed = 460800;
1175 siccuart_change_speed(info, NULL);
1176 }
1177 } else
1178 retval = siccuart_startup(info);
1179 return retval;
1180 }
1181
1182
1183 /*
1184 * get_lsr_info - get line status register info
1185 */
1186 static int get_lsr_info(struct SICC_info *info, unsigned int *value)
1187 {
1188 unsigned int result, status;
1189 unsigned long flags;
1190
1191 /* disable interrupts while reading status from port */
1192 spin_lock_irqsave(&info->state->sicc_lock,flags);
1193 status = readb(info->port->uart_base + BL_SICC_LSR);
1194 spin_unlock_irqrestore(&info->state->sicc_lock,flags);
1195 result = status & _LSR_TSR_EMPTY ? TIOCSER_TEMT : 0;
1196
1197 /*
1198 * If we're about to load something into the transmit
1199 * register, we'll pretend the transmitter isn't empty to
1200 * avoid a race condition (depending on when the transmit
1201 * interrupt happens).
1202 */
1203 if (info->x_char ||
1204 ((CIRC_CNT(info->xmit.head, info->xmit.tail,
1205 SICC_XMIT_SIZE) > 0) &&
1206 !info->tty->stopped && !info->tty->hw_stopped))
1207 result &= TIOCSER_TEMT;
1208
1209 return put_user(result, value);
1210 }
1211
1212 static int get_modem_info(struct SICC_info *info, unsigned int *value)
1213 {
1214 unsigned int result = info->mctrl;
1215
1216 return put_user(result, value);
1217 }
1218
1219 static int set_modem_info(struct SICC_info *info, unsigned int cmd,
1220 unsigned int *value)
1221 {
1222 unsigned int arg, old;
1223 unsigned long flags;
1224
1225 if (get_user(arg, value))
1226 return -EFAULT;
1227
1228 old = info->mctrl;
1229 switch (cmd) {
1230 case TIOCMBIS:
1231 info->mctrl |= arg;
1232 break;
1233
1234 case TIOCMBIC:
1235 info->mctrl &= ~arg;
1236 break;
1237
1238 case TIOCMSET:
1239 info->mctrl = arg;
1240 break;
1241
1242 default:
1243 return -EINVAL;
1244 }
1245 /* disable interrupts while setting modem control lines */
1246 spin_lock_irqsave(&info->state->sicc_lock,flags);
1247 if (old != info->mctrl)
1248 info->port->set_mctrl(info->port, info->mctrl);
1249 spin_unlock_irqrestore(&info->state->sicc_lock,flags);
1250 return 0;
1251 }
1252
1253 static void siccuart_break_ctl(struct tty_struct *tty, int break_state)
1254 {
1255 struct SICC_info *info = tty->driver_data;
1256 unsigned long flags;
1257 unsigned int lcr_h;
1258
1259
1260 /* disable interrupts while setting break state */
1261 spin_lock_irqsave(&info->state->sicc_lock,flags);
1262 lcr_h = readb(info->port + BL_SICC_LSR);
1263 if (break_state == -1)
1264 lcr_h |= _LSR_LB_MASK;
1265 else
1266 lcr_h &= ~_LSR_LB_MASK;
1267 writeb(lcr_h, info->port + BL_SICC_LSRS);
1268 spin_unlock_irqrestore(&info->state->sicc_lock,flags);
1269 }
1270
1271 static int siccuart_ioctl(struct tty_struct *tty, struct file *file,
1272 unsigned int cmd, unsigned long arg)
1273 {
1274 struct SICC_info *info = tty->driver_data;
1275 struct SICC_icount cnow;
1276 struct serial_icounter_struct icount;
1277 unsigned long flags;
1278
1279 if ((cmd != TIOCGSERIAL) && (cmd != TIOCSSERIAL) &&
1280 (cmd != TIOCSERCONFIG) && (cmd != TIOCSERGSTRUCT) &&
1281 (cmd != TIOCMIWAIT) && (cmd != TIOCGICOUNT)) {
1282 if (tty->flags & (1 << TTY_IO_ERROR))
1283 return -EIO;
1284 }
1285
1286 switch (cmd) {
1287 case TIOCMGET:
1288 return get_modem_info(info, (unsigned int *)arg);
1289 case TIOCMBIS:
1290 case TIOCMBIC:
1291 case TIOCMSET:
1292 return set_modem_info(info, cmd, (unsigned int *)arg);
1293 case TIOCGSERIAL:
1294 return get_serial_info(info,
1295 (struct serial_struct *)arg);
1296 case TIOCSSERIAL:
1297 return set_serial_info(info,
1298 (struct serial_struct *)arg);
1299 case TIOCSERGETLSR: /* Get line status register */
1300 return get_lsr_info(info, (unsigned int *)arg);
1301 /*
1302 * Wait for any of the 4 modem inputs (DCD,RI,DSR,CTS) to change
1303 * - mask passed in arg for lines of interest
1304 * (use |'ed TIOCM_RNG/DSR/CD/CTS for masking)
1305 * Caller should use TIOCGICOUNT to see which one it was
1306 */
1307 case TIOCMIWAIT:
1308 return 0;
1309 /*
1310 * Get counter of input serial line interrupts (DCD,RI,DSR,CTS)
1311 * Return: write counters to the user passed counter struct
1312 * NB: both 1->0 and 0->1 transitions are counted except for
1313 * RI where only 0->1 is counted.
1314 */
1315 case TIOCGICOUNT:
1316 /* disable interrupts while getting interrupt count */
1317 spin_lock_irqsave(&info->state->sicc_lock,flags);
1318 cnow = info->state->icount;
1319 spin_unlock_irqrestore(&info->state->sicc_lock,flags);
1320 icount.cts = cnow.cts;
1321 icount.dsr = cnow.dsr;
1322 icount.rng = cnow.rng;
1323 icount.dcd = cnow.dcd;
1324 icount.rx = cnow.rx;
1325 icount.tx = cnow.tx;
1326 icount.frame = cnow.frame;
1327 icount.overrun = cnow.overrun;
1328 icount.parity = cnow.parity;
1329 icount.brk = cnow.brk;
1330 icount.buf_overrun = cnow.buf_overrun;
1331
1332 return copy_to_user((void *)arg, &icount, sizeof(icount))
1333 ? -EFAULT : 0;
1334
1335 default:
1336 return -ENOIOCTLCMD;
1337 }
1338 return 0;
1339 }
1340
1341 static void siccuart_set_termios(struct tty_struct *tty, struct termios *old_termios)
1342 {
1343 struct SICC_info *info = tty->driver_data;
1344 unsigned long flags;
1345 unsigned int cflag = tty->termios->c_cflag;
1346
1347 if ((cflag ^ old_termios->c_cflag) == 0 &&
1348 RELEVENT_IFLAG(tty->termios->c_iflag ^ old_termios->c_iflag) == 0)
1349 return;
1350
1351 siccuart_change_speed(info, old_termios);
1352
1353 /* Handle transition to B0 status */
1354 if ((old_termios->c_cflag & CBAUD) &&
1355 !(cflag & CBAUD)) {
1356 /* disable interrupts while setting break state */
1357 spin_lock_irqsave(&info->state->sicc_lock,flags);
1358 info->mctrl &= ~(TIOCM_RTS | TIOCM_DTR);
1359 info->port->set_mctrl(info->port, info->mctrl);
1360 spin_unlock_irqrestore(&info->state->sicc_lock,flags);
1361 }
1362
1363 /* Handle transition away from B0 status */
1364 if (!(old_termios->c_cflag & CBAUD) &&
1365 (cflag & CBAUD)) {
1366 /* disable interrupts while setting break state */
1367 spin_lock_irqsave(&info->state->sicc_lock,flags);
1368 info->mctrl |= TIOCM_DTR;
1369 if (!(cflag & CRTSCTS) ||
1370 !test_bit(TTY_THROTTLED, &tty->flags))
1371 info->mctrl |= TIOCM_RTS;
1372 info->port->set_mctrl(info->port, info->mctrl);
1373 spin_unlock_irqrestore(&info->state->sicc_lock,flags);
1374 }
1375
1376 /* Handle turning off CRTSCTS */
1377 if ((old_termios->c_cflag & CRTSCTS) &&
1378 !(cflag & CRTSCTS)) {
1379 tty->hw_stopped = 0;
1380 siccuart_start(tty);
1381 }
1382
1383 #if 0
1384 /*
1385 * No need to wake up processes in open wait, since they
1386 * sample the CLOCAL flag once, and don't recheck it.
1387 * XXX It's not clear whether the current behavior is correct
1388 * or not. Hence, this may change.....
1389 */
1390 if (!(old_termios->c_cflag & CLOCAL) &&
1391 (tty->termios->c_cflag & CLOCAL))
1392 wake_up_interruptible(&info->open_wait);
1393 #endif
1394 }
1395
1396 static void siccuart_close(struct tty_struct *tty, struct file *filp)
1397 {
1398 struct SICC_info *info = tty->driver_data;
1399 struct SICC_state *state;
1400 unsigned long flags;
1401
1402 if (!info)
1403 return;
1404
1405 state = info->state;
1406
1407 //pr_debug("siccuart_close() called\n");
1408
1409 /* lock tty->driver_data while closing port */
1410 spin_lock_irqsave(&info->state->sicc_lock,flags);
1411
1412 if (tty_hung_up_p(filp)) {
1413 goto quick_close;
1414 }
1415
1416 if ((tty->count == 1) && (state->count != 1)) {
1417 /*
1418 * Uh, oh. tty->count is 1, which means that the tty
1419 * structure will be freed. state->count should always
1420 * be one in these conditions. If it's greater than
1421 * one, we've got real problems, since it means the
1422 * serial port won't be shutdown.
1423 */
1424 printk("siccuart_close: bad serial port count; tty->count is 1, state->count is %d\n", state->count);
1425 state->count = 1;
1426 }
1427 if (--state->count < 0) {
1428 printk("rs_close: bad serial port count for %s: %d\n", tty->name, state->count);
1429 state->count = 0;
1430 }
1431 if (state->count) {
1432 goto quick_close;
1433 }
1434 info->flags |= ASYNC_CLOSING;
1435 spin_unlock_irqrestore(&info->state->sicc_lock,flags);
1436 /*
1437 * Now we wait for the transmit buffer to clear; and we notify
1438 * the line discipline to only process XON/XOFF characters.
1439 */
1440 tty->closing = 1;
1441 if (info->state->closing_wait != ASYNC_CLOSING_WAIT_NONE)
1442 tty_wait_until_sent(tty, info->state->closing_wait);
1443 /*
1444 * At this point, we stop accepting input. To do this, we
1445 * disable the receive line status interrupts.
1446 */
1447 if (info->flags & ASYNC_INITIALIZED) {
1448 siccuart_disable_rx_interrupt(info);
1449 /*
1450 * Before we drop DTR, make sure the UART transmitter
1451 * has completely drained; this is especially
1452 * important if there is a transmit FIFO!
1453 */
1454 siccuart_wait_until_sent(tty, info->timeout);
1455 }
1456 siccuart_shutdown(info);
1457 if (tty->driver->flush_buffer)
1458 tty->driver->flush_buffer(tty);
1459 if (tty->ldisc.flush_buffer)
1460 tty->ldisc.flush_buffer(tty);
1461 tty->closing = 0;
1462 info->event = 0;
1463 info->tty = NULL;
1464 if (info->blocked_open) {
1465 if (info->state->close_delay)
1466 schedule_timeout_interruptible(info->state->close_delay);
1467 wake_up_interruptible(&info->open_wait);
1468 }
1469 info->flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING);
1470 wake_up_interruptible(&info->close_wait);
1471 return;
1472
1473 quick_close:
1474 spin_unlock_irqrestore(&info->state->sicc_lock,flags);
1475 return;
1476 }
1477
1478 static void siccuart_wait_until_sent(struct tty_struct *tty, int timeout)
1479 {
1480 struct SICC_info *info = (struct SICC_info *) tty->driver_data;
1481 unsigned long char_time, expire;
1482
1483 if (info->port->fifosize == 0)
1484 return;
1485
1486 /*
1487 * Set the check interval to be 1/5 of the estimated time to
1488 * send a single character, and make it at least 1. The check
1489 * interval should also be less than the timeout.
1490 *
1491 * Note: we have to use pretty tight timings here to satisfy
1492 * the NIST-PCTS.
1493 */
1494 char_time = (info->timeout - msecs_to_jiffies(20)) / info->port->fifosize;
1495 char_time = char_time / 5;
1496 if (char_time == 0)
1497 char_time = 1;
1498
1499 // Crazy!! sometimes the input arg 'timeout' can be negtive numbers :-(
1500 if (timeout >= 0 && timeout < char_time)
1501 char_time = timeout;
1502 /*
1503 * If the transmitter hasn't cleared in twice the approximate
1504 * amount of time to send the entire FIFO, it probably won't
1505 * ever clear. This assumes the UART isn't doing flow
1506 * control, which is currently the case. Hence, if it ever
1507 * takes longer than info->timeout, this is probably due to a
1508 * UART bug of some kind. So, we clamp the timeout parameter at
1509 * 2*info->timeout.
1510 */
1511 if (!timeout || timeout > 2 * info->timeout)
1512 timeout = 2 * info->timeout;
1513
1514 expire = jiffies + timeout;
1515 pr_debug("siccuart_wait_until_sent(%d), jiff=%lu, expire=%lu char_time=%lu...\n",
1516 tty->index, jiffies,
1517 expire, char_time);
1518 while ((readb(info->port->uart_base + BL_SICC_LSR) & _LSR_TX_ALL) != _LSR_TX_ALL) {
1519 schedule_timeout_interruptible(char_time);
1520 if (signal_pending(current))
1521 break;
1522 if (timeout && time_after(jiffies, expire))
1523 break;
1524 }
1525 set_current_state(TASK_RUNNING);
1526 }
1527
1528 static void siccuart_hangup(struct tty_struct *tty)
1529 {
1530 struct SICC_info *info = tty->driver_data;
1531 struct SICC_state *state = info->state;
1532
1533 siccuart_flush_buffer(tty);
1534 if (info->flags & ASYNC_CLOSING)
1535 return;
1536 siccuart_shutdown(info);
1537 info->event = 0;
1538 state->count = 0;
1539 info->flags &= ~ASYNC_NORMAL_ACTIVE;
1540 info->tty = NULL;
1541 wake_up_interruptible(&info->open_wait);
1542 }
1543
1544 static int block_til_ready(struct tty_struct *tty, struct file *filp,
1545 struct SICC_info *info)
1546 {
1547 DECLARE_WAITQUEUE(wait, current);
1548 struct SICC_state *state = info->state;
1549 unsigned long flags;
1550 int do_clocal = 0, extra_count = 0, retval;
1551
1552 /*
1553 * If the device is in the middle of being closed, then block
1554 * until it's done, and then try again.
1555 */
1556 if (tty_hung_up_p(filp) ||
1557 (info->flags & ASYNC_CLOSING)) {
1558 if (info->flags & ASYNC_CLOSING)
1559 interruptible_sleep_on(&info->close_wait);
1560 return (info->flags & ASYNC_HUP_NOTIFY) ?
1561 -EAGAIN : -ERESTARTSYS;
1562 }
1563
1564 /*
1565 * If non-blocking mode is set, or the port is not enabled,
1566 * then make the check up front and then exit.
1567 */
1568 if ((filp->f_flags & O_NONBLOCK) ||
1569 (tty->flags & (1 << TTY_IO_ERROR))) {
1570 info->flags |= ASYNC_NORMAL_ACTIVE;
1571 return 0;
1572 }
1573
1574 if (tty->termios->c_cflag & CLOCAL)
1575 do_clocal = 1;
1576
1577 /*
1578 * Block waiting for the carrier detect and the line to become
1579 * free (i.e., not in use by the callout). While we are in
1580 * this loop, state->count is dropped by one, so that
1581 * rs_close() knows when to free things. We restore it upon
1582 * exit, either normal or abnormal.
1583 */
1584 retval = 0;
1585 add_wait_queue(&info->open_wait, &wait);
1586 /* lock while decrementing state->count */
1587 spin_lock_irqsave(&info->state->sicc_lock,flags);
1588 if (!tty_hung_up_p(filp)) {
1589 extra_count = 1;
1590 state->count--;
1591 }
1592 spin_unlock_irqrestore(&info->state->sicc_lock,flags);
1593 info->blocked_open++;
1594 while (1) {
1595 /* disable interrupts while setting modem control lines */
1596 spin_lock_irqsave(&info->state->sicc_lock,flags);
1597 if (tty->termios->c_cflag & CBAUD) {
1598 info->mctrl = TIOCM_DTR | TIOCM_RTS;
1599 info->port->set_mctrl(info->port, info->mctrl);
1600 }
1601 spin_unlock_irqrestore(&info->state->sicc_lock,flags);
1602 set_current_state(TASK_INTERRUPTIBLE);
1603 if (tty_hung_up_p(filp) ||
1604 !(info->flags & ASYNC_INITIALIZED)) {
1605 if (info->flags & ASYNC_HUP_NOTIFY)
1606 retval = -EAGAIN;
1607 else
1608 retval = -ERESTARTSYS;
1609 break;
1610 }
1611 if (!(info->flags & ASYNC_CLOSING) &&
1612 (do_clocal /*|| (UART_GET_FR(info->port) & SICC_UARTFR_DCD)*/))
1613 break;
1614 if (signal_pending(current)) {
1615 retval = -ERESTARTSYS;
1616 break;
1617 }
1618 schedule();
1619 }
1620 set_current_state(TASK_RUNNING);
1621 remove_wait_queue(&info->open_wait, &wait);
1622 if (extra_count)
1623 state->count++;
1624 info->blocked_open--;
1625 if (retval)
1626 return retval;
1627 info->flags |= ASYNC_NORMAL_ACTIVE;
1628 return 0;
1629 }
1630
1631 static struct SICC_info *siccuart_get(int line)
1632 {
1633 struct SICC_info *info;
1634 struct SICC_state *state = sicc_state + line;
1635
1636 state->count++;
1637 if (state->info)
1638 return state->info;
1639 info = kzalloc(sizeof(struct SICC_info), GFP_KERNEL);
1640 if (info) {
1641 init_waitqueue_head(&info->open_wait);
1642 init_waitqueue_head(&info->close_wait);
1643 init_waitqueue_head(&info->delta_msr_wait);
1644 info->flags = state->flags;
1645 info->state = state;
1646 info->port = sicc_ports + line;
1647 tasklet_init(&info->tlet, siccuart_tasklet_action,
1648 (unsigned long)info);
1649 }
1650 if (state->info) {
1651 kfree(info);
1652 return state->info;
1653 }
1654 state->info = info;
1655 return info;
1656 }
1657
1658 static int siccuart_open(struct tty_struct *tty, struct file *filp)
1659 {
1660 struct SICC_info *info;
1661 int retval, line = tty->index;
1662
1663
1664 // is this a line that we've got?
1665 if (line >= SERIAL_SICC_NR) {
1666 return -ENODEV;
1667 }
1668
1669 info = siccuart_get(line);
1670 if (!info)
1671 return -ENOMEM;
1672
1673 tty->driver_data = info;
1674 info->tty = tty;
1675 info->tty->low_latency = (info->flags & ASYNC_LOW_LATENCY) ? 1 : 0;
1676
1677 /*
1678 * Make sure we have the temporary buffer allocated
1679 */
1680 if (!tmp_buf) {
1681 unsigned long page = get_zeroed_page(GFP_KERNEL);
1682 if (tmp_buf)
1683 free_page(page);
1684 else if (!page) {
1685 return -ENOMEM;
1686 }
1687 tmp_buf = (u_char *)page;
1688 }
1689
1690 /*
1691 * If the port is in the middle of closing, bail out now.
1692 */
1693 if (tty_hung_up_p(filp) ||
1694 (info->flags & ASYNC_CLOSING)) {
1695 if (info->flags & ASYNC_CLOSING)
1696 interruptible_sleep_on(&info->close_wait);
1697 return -EAGAIN;
1698 }
1699
1700 /*
1701 * Start up the serial port
1702 */
1703 retval = siccuart_startup(info);
1704 if (retval) {
1705 return retval;
1706 }
1707
1708 retval = block_til_ready(tty, filp, info);
1709 if (retval) {
1710 return retval;
1711 }
1712
1713 #ifdef CONFIG_SERIAL_SICC_CONSOLE
1714 if (siccuart_cons.cflag && siccuart_cons.index == line) {
1715 tty->termios->c_cflag = siccuart_cons.cflag;
1716 siccuart_cons.cflag = 0;
1717 siccuart_change_speed(info, NULL);
1718 }
1719 #endif
1720 return 0;
1721 }
1722
1723 static const struct tty_operations sicc_ops = {
1724 .open = siccuart_open,
1725 .close = siccuart_close,
1726 .write = siccuart_write,
1727 .put_char = siccuart_put_char,
1728 .flush_chars = siccuart_flush_chars,
1729 .write_room = siccuart_write_room,
1730 .chars_in_buffer = siccuart_chars_in_buffer,
1731 .flush_buffer = siccuart_flush_buffer,
1732 .ioctl = siccuart_ioctl,
1733 .throttle = siccuart_throttle,
1734 .unthrottle = siccuart_unthrottle,
1735 .send_xchar = siccuart_send_xchar,
1736 .set_termios = siccuart_set_termios,
1737 .stop = siccuart_stop,
1738 .start = siccuart_start,
1739 .hangup = siccuart_hangup,
1740 .break_ctl = siccuart_break_ctl,
1741 .wait_until_sent = siccuart_wait_until_sent,
1742 };
1743
1744 int __init siccuart_init(void)
1745 {
1746 int i;
1747 siccnormal_driver = alloc_tty_driver(SERIAL_SICC_NR);
1748 if (!siccnormal_driver)
1749 return -ENOMEM;
1750 printk("IBM Vesta SICC serial port driver V 0.1 by Yudong Yang and Yi Ge / IBM CRL .\n");
1751 siccnormal_driver->driver_name = "serial_sicc";
1752 siccnormal_driver->owner = THIS_MODULE;
1753 siccnormal_driver->name = SERIAL_SICC_NAME;
1754 siccnormal_driver->major = SERIAL_SICC_MAJOR;
1755 siccnormal_driver->minor_start = SERIAL_SICC_MINOR;
1756 siccnormal_driver->type = TTY_DRIVER_TYPE_SERIAL;
1757 siccnormal_driver->subtype = SERIAL_TYPE_NORMAL;
1758 siccnormal_driver->init_termios = tty_std_termios;
1759 siccnormal_driver->init_termios.c_cflag = B9600 | CS8 | CREAD | HUPCL | CLOCAL;
1760 siccnormal_driver->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV;
1761 tty_set_operations(siccnormal_driver, &sicc_ops);
1762
1763 if (tty_register_driver(siccnormal_driver))
1764 panic("Couldn't register SICC serial driver\n");
1765
1766 for (i = 0; i < SERIAL_SICC_NR; i++) {
1767 struct SICC_state *state = sicc_state + i;
1768 state->line = i;
1769 state->close_delay = msecs_to_jiffies(500);
1770 state->closing_wait = 30 * HZ;
1771 spin_lock_init(&state->sicc_lock);
1772 }
1773
1774
1775 return 0;
1776 }
1777
1778 __initcall(siccuart_init);
1779
1780 #ifdef CONFIG_SERIAL_SICC_CONSOLE
1781 /************** console driver *****************/
1782
1783 /*
1784 * This code is currently never used; console->read is never called.
1785 * Therefore, although we have an implementation, we don't use it.
1786 * FIXME: the "const char *s" should be fixed to "char *s" some day.
1787 * (when the definition in include/linux/console.h is also fixed)
1788 */
1789 #ifdef used_and_not_const_char_pointer
1790 static int siccuart_console_read(struct console *co, const char *s, u_int count)
1791 {
1792 struct SICC_port *port = &sicc_ports[co->index];
1793 unsigned int status;
1794 char *w;
1795 int c;
1796
1797 pr_debug("siccuart_console_read() called\n");
1798
1799 c = 0;
1800 w = s;
1801 while (c < count) {
1802 if(readb(port->uart_base + BL_SICC_LSR) & _LSR_RBR_FULL) {
1803 *w++ = readb(port->uart_base + BL_SICC_RBR);
1804 c++;
1805 } else {
1806 // nothing more to get, return
1807 return c;
1808 }
1809 }
1810 // return the count
1811 return c;
1812 }
1813 #endif
1814
1815 /*
1816 * Print a string to the serial port trying not to disturb
1817 * any possible real use of the port...
1818 *
1819 * The console_lock must be held when we get here.
1820 */
1821 static void siccuart_console_write(struct console *co, const char *s, u_int count)
1822 {
1823 struct SICC_port *port = &sicc_ports[co->index];
1824 unsigned int old_cr;
1825 int i;
1826
1827 /*
1828 * First save the CR then disable the interrupts
1829 */
1830 old_cr = readb(port->uart_base + BL_SICC_TxCR);
1831 writeb(old_cr & ~_TxCR_DME_MASK, port->uart_base + BL_SICC_TxCR);
1832
1833 /*
1834 * Now, do each character
1835 */
1836 for (i = 0; i < count; i++) {
1837 while ((readb(port->uart_base + BL_SICC_LSR)&_LSR_TX_ALL) != _LSR_TX_ALL);
1838 writeb(s[i], port->uart_base + BL_SICC_TBR);
1839 if (s[i] == '\n') {
1840 while ((readb(port->uart_base + BL_SICC_LSR)&_LSR_TX_ALL) != _LSR_TX_ALL);
1841 writeb('\r', port->uart_base + BL_SICC_TBR);
1842 }
1843 }
1844
1845 /*
1846 * Finally, wait for transmitter to become empty
1847 * and restore the TCR
1848 */
1849 while ((readb(port->uart_base + BL_SICC_LSR)&_LSR_TX_ALL) != _LSR_TX_ALL);
1850 writeb(old_cr, port->uart_base + BL_SICC_TxCR);
1851 }
1852
1853 /*
1854 * Receive character from the serial port
1855 */
1856 static int siccuart_console_wait_key(struct console *co)
1857 {
1858 struct SICC_port *port = &sicc_ports[co->index];
1859 int c;
1860
1861 while(!(readb(port->uart_base + BL_SICC_LSR) & _LSR_RBR_FULL));
1862 c = readb(port->uart_base + BL_SICC_RBR);
1863 return c;
1864 }
1865
1866 static struct tty_driver *siccuart_console_device(struct console *c, int *index)
1867 {
1868 *index = c->index;
1869 return siccnormal_driver;
1870 }
1871
1872 static int __init siccuart_console_setup(struct console *co, char *options)
1873 {
1874 struct SICC_port *port;
1875 int baud = 9600;
1876 int bits = 8;
1877 int parity = 'n';
1878 u_int cflag = CREAD | HUPCL | CLOCAL;
1879 u_int lcr_h, quot;
1880
1881
1882 if (co->index >= SERIAL_SICC_NR)
1883 co->index = 0;
1884
1885 port = &sicc_ports[co->index];
1886
1887 if (port->uart_base == 0)
1888 port->uart_base = (int)ioremap(port->uart_base_phys, PAGE_SIZE);
1889
1890 if (options) {
1891 char *s = options;
1892 baud = simple_strtoul(s, NULL, 10);
1893 while (*s >= '0' && *s <= '9')
1894 s++;
1895 if (*s) parity = *s++;
1896 if (*s) bits = *s - '0';
1897 }
1898
1899 /*
1900 * Now construct a cflag setting.
1901 */
1902 switch (baud) {
1903 case 1200: cflag |= B1200; break;
1904 case 2400: cflag |= B2400; break;
1905 case 4800: cflag |= B4800; break;
1906 default: cflag |= B9600; baud = 9600; break;
1907 case 19200: cflag |= B19200; break;
1908 case 38400: cflag |= B38400; break;
1909 case 57600: cflag |= B57600; break;
1910 case 115200: cflag |= B115200; break;
1911 }
1912 switch (bits) {
1913 case 7: cflag |= CS7; lcr_h = _LCR_PE_DISABLE | _LCR_DB_7_BITS | _LCR_SB_1_BIT; break;
1914 default: cflag |= CS8; lcr_h = _LCR_PE_DISABLE | _LCR_DB_8_BITS | _LCR_SB_1_BIT; break;
1915 }
1916 switch (parity) {
1917 case 'o':
1918 case 'O': cflag |= PARODD; lcr_h |= _LCR_PTY_ODD; break;
1919 case 'e':
1920 case 'E': cflag |= PARENB; lcr_h |= _LCR_PE_ENABLE | _LCR_PTY_ODD; break;
1921 }
1922
1923 co->cflag = cflag;
1924
1925
1926 {
1927 // a copy of is inserted here ppc403SetBaud(com_port, (int)9600);
1928 unsigned long divisor, clockSource, temp;
1929 unsigned int rate = baud;
1930
1931 /* Ensure CICCR[7] is 0 to select Internal Baud Clock */
1932 powerpcMtcic_cr((unsigned long)(powerpcMfcic_cr() & 0xFEFFFFFF));
1933
1934 /* Determine Internal Baud Clock Frequency */
1935 /* powerpcMfclkgpcr() reads DCR 0x120 - the*/
1936 /* SCCR (Serial Clock Control Register) on Vesta */
1937 temp = powerpcMfclkgpcr();
1938
1939 if(temp & 0x00000080) {
1940 clockSource = 324000000;
1941 }
1942 else {
1943 clockSource = 216000000;
1944 }
1945 clockSource = clockSource/(unsigned long)((temp&0x00FC0000)>>18);
1946 divisor = clockSource/(16*rate) - 1;
1947 /* divisor has only 12 bits of resolution */
1948 if(divisor>0x00000FFF){
1949 divisor=0x00000FFF;
1950 }
1951
1952 quot = divisor;
1953 }
1954
1955 writeb((quot & 0x00000F00)>>8, port->uart_base + BL_SICC_BRDH );
1956 writeb( quot & 0x00000FF, port->uart_base + BL_SICC_BRDL );
1957
1958 /* Set CTL2 reg to use external clock (ExtClk) and enable FIFOs. */
1959 /* For now, do NOT use FIFOs since 403 UART did not have this */
1960 /* capability and this driver was inherited from 403UART. */
1961 writeb(_CTL2_EXTERN, port->uart_base + BL_SICC_CTL2);
1962
1963 writeb(lcr_h, port->uart_base + BL_SICC_LCR);
1964 writeb(_RCR_ER_ENABLE | _RCR_PME_HARD, port->uart_base + BL_SICC_RCR);
1965 writeb( _TxCR_ET_ENABLE , port->uart_base + BL_SICC_TxCR);
1966
1967 // writeb(, info->port->uart_base + BL_SICC_RCR );
1968 /*
1969 * Transmitter Command Register: Transmitter enabled & DMA + TBR interrupt
1970 * + Transmitter Empty interrupt + Transmitter error interrupt disabled &
1971 * Stop mode when CTS active enabled & Transmit Break + Pattern Generation
1972 * mode disabled.
1973 */
1974
1975 writeb( 0x00, port->uart_base + BL_SICC_IrCR ); // disable IrDA
1976
1977 readb(port->uart_base + BL_SICC_RBR);
1978
1979 writeb(0xf8, port->uart_base + BL_SICC_LSR); /* reset bits 0-4 of LSR */
1980
1981 /* we will enable the port as we need it */
1982
1983 return 0;
1984 }
1985
1986 static struct console siccuart_cons =
1987 {
1988 .name = SERIAL_SICC_NAME,
1989 .write = siccuart_console_write,
1990 #ifdef used_and_not_const_char_pointer
1991 .read = siccuart_console_read,
1992 #endif
1993 .device = siccuart_console_device,
1994 .wait_key = siccuart_console_wait_key,
1995 .setup = siccuart_console_setup,
1996 .flags = CON_PRINTBUFFER,
1997 .index = -1,
1998 };
1999
2000 void __init sicc_console_init(void)
2001 {
2002 register_console(&siccuart_cons);
2003 }
2004
2005 #endif /* CONFIG_SERIAL_SICC_CONSOLE */
linux-next