Linux 2.6.25-rc4
[linux-2.6/next.git] / arch / sparc / kernel / setup.c
blob3c13137685da8a281adee5bccf44c5f5f4438654
1 /* $Id: setup.c,v 1.126 2001/11/13 00:49:27 davem Exp $
2 * linux/arch/sparc/kernel/setup.c
4 * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
5 * Copyright (C) 2000 Anton Blanchard (anton@samba.org)
6 */
8 #include <linux/errno.h>
9 #include <linux/sched.h>
10 #include <linux/kernel.h>
11 #include <linux/mm.h>
12 #include <linux/stddef.h>
13 #include <linux/unistd.h>
14 #include <linux/ptrace.h>
15 #include <linux/slab.h>
16 #include <linux/initrd.h>
17 #include <asm/smp.h>
18 #include <linux/user.h>
19 #include <linux/screen_info.h>
20 #include <linux/delay.h>
21 #include <linux/fs.h>
22 #include <linux/seq_file.h>
23 #include <linux/syscalls.h>
24 #include <linux/kdev_t.h>
25 #include <linux/major.h>
26 #include <linux/string.h>
27 #include <linux/init.h>
28 #include <linux/interrupt.h>
29 #include <linux/console.h>
30 #include <linux/spinlock.h>
31 #include <linux/root_dev.h>
32 #include <linux/cpu.h>
33 #include <linux/kdebug.h>
35 #include <asm/system.h>
36 #include <asm/io.h>
37 #include <asm/processor.h>
38 #include <asm/oplib.h>
39 #include <asm/page.h>
40 #include <asm/pgtable.h>
41 #include <asm/traps.h>
42 #include <asm/vaddrs.h>
43 #include <asm/mbus.h>
44 #include <asm/idprom.h>
45 #include <asm/machines.h>
46 #include <asm/cpudata.h>
47 #include <asm/setup.h>
49 struct screen_info screen_info = {
50 0, 0, /* orig-x, orig-y */
51 0, /* unused */
52 0, /* orig-video-page */
53 0, /* orig-video-mode */
54 128, /* orig-video-cols */
55 0,0,0, /* ega_ax, ega_bx, ega_cx */
56 54, /* orig-video-lines */
57 0, /* orig-video-isVGA */
58 16 /* orig-video-points */
61 /* Typing sync at the prom prompt calls the function pointed to by
62 * romvec->pv_synchook which I set to the following function.
63 * This should sync all filesystems and return, for now it just
64 * prints out pretty messages and returns.
67 extern unsigned long trapbase;
69 /* Pretty sick eh? */
70 void prom_sync_me(void)
72 unsigned long prom_tbr, flags;
74 /* XXX Badly broken. FIX! - Anton */
75 local_irq_save(flags);
76 __asm__ __volatile__("rd %%tbr, %0\n\t" : "=r" (prom_tbr));
77 __asm__ __volatile__("wr %0, 0x0, %%tbr\n\t"
78 "nop\n\t"
79 "nop\n\t"
80 "nop\n\t" : : "r" (&trapbase));
82 prom_printf("PROM SYNC COMMAND...\n");
83 show_free_areas();
84 if(current->pid != 0) {
85 local_irq_enable();
86 sys_sync();
87 local_irq_disable();
89 prom_printf("Returning to prom\n");
91 __asm__ __volatile__("wr %0, 0x0, %%tbr\n\t"
92 "nop\n\t"
93 "nop\n\t"
94 "nop\n\t" : : "r" (prom_tbr));
95 local_irq_restore(flags);
97 return;
100 unsigned int boot_flags __initdata = 0;
101 #define BOOTME_DEBUG 0x1
103 /* Exported for mm/init.c:paging_init. */
104 unsigned long cmdline_memory_size __initdata = 0;
106 static void
107 prom_console_write(struct console *con, const char *s, unsigned n)
109 prom_write(s, n);
112 static struct console prom_debug_console = {
113 .name = "debug",
114 .write = prom_console_write,
115 .flags = CON_PRINTBUFFER,
116 .index = -1,
120 * Process kernel command line switches that are specific to the
121 * SPARC or that require special low-level processing.
123 static void __init process_switch(char c)
125 switch (c) {
126 case 'd':
127 boot_flags |= BOOTME_DEBUG;
128 break;
129 case 's':
130 break;
131 case 'h':
132 prom_printf("boot_flags_init: Halt!\n");
133 prom_halt();
134 break;
135 case 'p':
136 /* Use PROM debug console. */
137 register_console(&prom_debug_console);
138 break;
139 default:
140 printk("Unknown boot switch (-%c)\n", c);
141 break;
145 static void __init boot_flags_init(char *commands)
147 while (*commands) {
148 /* Move to the start of the next "argument". */
149 while (*commands && *commands == ' ')
150 commands++;
152 /* Process any command switches, otherwise skip it. */
153 if (*commands == '\0')
154 break;
155 if (*commands == '-') {
156 commands++;
157 while (*commands && *commands != ' ')
158 process_switch(*commands++);
159 continue;
161 if (!strncmp(commands, "mem=", 4)) {
163 * "mem=XXX[kKmM] overrides the PROM-reported
164 * memory size.
166 cmdline_memory_size = simple_strtoul(commands + 4,
167 &commands, 0);
168 if (*commands == 'K' || *commands == 'k') {
169 cmdline_memory_size <<= 10;
170 commands++;
171 } else if (*commands=='M' || *commands=='m') {
172 cmdline_memory_size <<= 20;
173 commands++;
176 while (*commands && *commands != ' ')
177 commands++;
181 /* This routine will in the future do all the nasty prom stuff
182 * to probe for the mmu type and its parameters, etc. This will
183 * also be where SMP things happen plus the Sparc specific memory
184 * physical memory probe as on the alpha.
187 extern int prom_probe_memory(void);
188 extern void sun4c_probe_vac(void);
189 extern char cputypval;
190 extern unsigned long start, end;
192 extern unsigned short root_flags;
193 extern unsigned short root_dev;
194 extern unsigned short ram_flags;
195 #define RAMDISK_IMAGE_START_MASK 0x07FF
196 #define RAMDISK_PROMPT_FLAG 0x8000
197 #define RAMDISK_LOAD_FLAG 0x4000
199 extern int root_mountflags;
201 char reboot_command[COMMAND_LINE_SIZE];
202 enum sparc_cpu sparc_cpu_model;
204 struct tt_entry *sparc_ttable;
206 struct pt_regs fake_swapper_regs;
208 void __init setup_arch(char **cmdline_p)
210 int i;
211 unsigned long highest_paddr;
213 sparc_ttable = (struct tt_entry *) &start;
215 /* Initialize PROM console and command line. */
216 *cmdline_p = prom_getbootargs();
217 strcpy(boot_command_line, *cmdline_p);
219 /* Set sparc_cpu_model */
220 sparc_cpu_model = sun_unknown;
221 if(!strcmp(&cputypval,"sun4 ")) { sparc_cpu_model=sun4; }
222 if(!strcmp(&cputypval,"sun4c")) { sparc_cpu_model=sun4c; }
223 if(!strcmp(&cputypval,"sun4m")) { sparc_cpu_model=sun4m; }
224 if(!strcmp(&cputypval,"sun4s")) { sparc_cpu_model=sun4m; } /* CP-1200 with PROM 2.30 -E */
225 if(!strcmp(&cputypval,"sun4d")) { sparc_cpu_model=sun4d; }
226 if(!strcmp(&cputypval,"sun4e")) { sparc_cpu_model=sun4e; }
227 if(!strcmp(&cputypval,"sun4u")) { sparc_cpu_model=sun4u; }
229 #ifdef CONFIG_SUN4
230 if (sparc_cpu_model != sun4) {
231 prom_printf("This kernel is for Sun4 architecture only.\n");
232 prom_halt();
234 #endif
235 printk("ARCH: ");
236 switch(sparc_cpu_model) {
237 case sun4:
238 printk("SUN4\n");
239 break;
240 case sun4c:
241 printk("SUN4C\n");
242 break;
243 case sun4m:
244 printk("SUN4M\n");
245 break;
246 case sun4d:
247 printk("SUN4D\n");
248 break;
249 case sun4e:
250 printk("SUN4E\n");
251 break;
252 case sun4u:
253 printk("SUN4U\n");
254 break;
255 default:
256 printk("UNKNOWN!\n");
257 break;
260 #ifdef CONFIG_DUMMY_CONSOLE
261 conswitchp = &dummy_con;
262 #elif defined(CONFIG_PROM_CONSOLE)
263 conswitchp = &prom_con;
264 #endif
265 boot_flags_init(*cmdline_p);
267 idprom_init();
268 if (ARCH_SUN4C_SUN4)
269 sun4c_probe_vac();
270 load_mmu();
271 (void) prom_probe_memory();
273 phys_base = 0xffffffffUL;
274 highest_paddr = 0UL;
275 for (i = 0; sp_banks[i].num_bytes != 0; i++) {
276 unsigned long top;
278 if (sp_banks[i].base_addr < phys_base)
279 phys_base = sp_banks[i].base_addr;
280 top = sp_banks[i].base_addr +
281 sp_banks[i].num_bytes;
282 if (highest_paddr < top)
283 highest_paddr = top;
285 pfn_base = phys_base >> PAGE_SHIFT;
287 if (!root_flags)
288 root_mountflags &= ~MS_RDONLY;
289 ROOT_DEV = old_decode_dev(root_dev);
290 #ifdef CONFIG_BLK_DEV_RAM
291 rd_image_start = ram_flags & RAMDISK_IMAGE_START_MASK;
292 rd_prompt = ((ram_flags & RAMDISK_PROMPT_FLAG) != 0);
293 rd_doload = ((ram_flags & RAMDISK_LOAD_FLAG) != 0);
294 #endif
296 prom_setsync(prom_sync_me);
298 if((boot_flags&BOOTME_DEBUG) && (linux_dbvec!=0) &&
299 ((*(short *)linux_dbvec) != -1)) {
300 printk("Booted under KADB. Syncing trap table.\n");
301 (*(linux_dbvec->teach_debugger))();
304 init_mm.context = (unsigned long) NO_CONTEXT;
305 init_task.thread.kregs = &fake_swapper_regs;
307 paging_init();
309 smp_setup_cpu_possible_map();
312 extern char *sparc_cpu_type;
313 extern char *sparc_fpu_type;
315 static int ncpus_probed;
317 static int show_cpuinfo(struct seq_file *m, void *__unused)
319 seq_printf(m,
320 "cpu\t\t: %s\n"
321 "fpu\t\t: %s\n"
322 "promlib\t\t: Version %d Revision %d\n"
323 "prom\t\t: %d.%d\n"
324 "type\t\t: %s\n"
325 "ncpus probed\t: %d\n"
326 "ncpus active\t: %d\n"
327 #ifndef CONFIG_SMP
328 "CPU0Bogo\t: %lu.%02lu\n"
329 "CPU0ClkTck\t: %ld\n"
330 #endif
332 sparc_cpu_type ? sparc_cpu_type : "undetermined",
333 sparc_fpu_type ? sparc_fpu_type : "undetermined",
334 romvec->pv_romvers,
335 prom_rev,
336 romvec->pv_printrev >> 16,
337 romvec->pv_printrev & 0xffff,
338 &cputypval,
339 ncpus_probed,
340 num_online_cpus()
341 #ifndef CONFIG_SMP
342 , cpu_data(0).udelay_val/(500000/HZ),
343 (cpu_data(0).udelay_val/(5000/HZ)) % 100,
344 cpu_data(0).clock_tick
345 #endif
348 #ifdef CONFIG_SMP
349 smp_bogo(m);
350 #endif
351 mmu_info(m);
352 #ifdef CONFIG_SMP
353 smp_info(m);
354 #endif
355 return 0;
358 static void *c_start(struct seq_file *m, loff_t *pos)
360 /* The pointer we are returning is arbitrary,
361 * it just has to be non-NULL and not IS_ERR
362 * in the success case.
364 return *pos == 0 ? &c_start : NULL;
367 static void *c_next(struct seq_file *m, void *v, loff_t *pos)
369 ++*pos;
370 return c_start(m, pos);
373 static void c_stop(struct seq_file *m, void *v)
377 const struct seq_operations cpuinfo_op = {
378 .start =c_start,
379 .next = c_next,
380 .stop = c_stop,
381 .show = show_cpuinfo,
384 extern int stop_a_enabled;
386 void sun_do_break(void)
388 if (!stop_a_enabled)
389 return;
391 printk("\n");
392 flush_user_windows();
394 prom_cmdline();
397 int stop_a_enabled = 1;
399 static int __init topology_init(void)
401 int i, ncpus, err;
403 /* Count the number of physically present processors in
404 * the machine, even on uniprocessor, so that /proc/cpuinfo
405 * output is consistent with 2.4.x
407 ncpus = 0;
408 while (!cpu_find_by_instance(ncpus, NULL, NULL))
409 ncpus++;
410 ncpus_probed = ncpus;
412 err = 0;
413 for_each_online_cpu(i) {
414 struct cpu *p = kzalloc(sizeof(*p), GFP_KERNEL);
415 if (!p)
416 err = -ENOMEM;
417 else
418 register_cpu(p, i);
421 return err;
424 subsys_initcall(topology_init);