2 * ci13xxx_udc.c - MIPS USB IP core family device controller
4 * Copyright (C) 2008 Chipidea - MIPS Technologies, Inc. All rights reserved.
8 * This program is free software; you can redistribute it and/or modify
9 * it under the terms of the GNU General Public License version 2 as
10 * published by the Free Software Foundation.
14 * Description: MIPS USB IP core family device controller
15 * Currently it only supports IP part number CI13412
17 * This driver is composed of several blocks:
18 * - HW: hardware interface
19 * - DBG: debug facilities (optional)
21 * - ISR: interrupts handling
22 * - ENDPT: endpoint operations (Gadget API)
23 * - GADGET: gadget operations (Gadget API)
24 * - BUS: bus glue code, bus abstraction layer
27 * - CONFIG_USB_GADGET_DEBUG_FILES: enable debug facilities
28 * - STALL_IN: non-empty bulk-in pipes cannot be halted
29 * if defined mass storage compliance succeeds but with warnings
33 * if undefined usbtest 13 fails
34 * - TRACE: enable function tracing (depends on DEBUG)
37 * - Chapter 9 & Mass Storage Compliance with Gadget File Storage
38 * - Chapter 9 Compliance with Gadget Zero (STALL_IN undefined)
39 * - Normal & LPM support
42 * - OK: 0-12, 13 (STALL_IN defined) & 14
43 * - Not Supported: 15 & 16 (ISO)
47 * - Isochronous & Interrupt Traffic
48 * - Handle requests which spawns into several TDs
49 * - GET_STATUS(device) - always reports 0
50 * - Gadget API (majority of optional features)
51 * - Suspend & Remote Wakeup
53 #include <linux/delay.h>
54 #include <linux/device.h>
55 #include <linux/dmapool.h>
56 #include <linux/dma-mapping.h>
57 #include <linux/init.h>
58 #include <linux/interrupt.h>
60 #include <linux/irq.h>
61 #include <linux/kernel.h>
62 #include <linux/slab.h>
63 #include <linux/pm_runtime.h>
64 #include <linux/usb/ch9.h>
65 #include <linux/usb/gadget.h>
66 #include <linux/usb/otg.h>
68 #include "ci13xxx_udc.h"
71 /******************************************************************************
73 *****************************************************************************/
74 /* ctrl register bank access */
75 static DEFINE_SPINLOCK(udc_lock
);
77 /* control endpoint description */
78 static const struct usb_endpoint_descriptor
79 ctrl_endpt_out_desc
= {
80 .bLength
= USB_DT_ENDPOINT_SIZE
,
81 .bDescriptorType
= USB_DT_ENDPOINT
,
83 .bEndpointAddress
= USB_DIR_OUT
,
84 .bmAttributes
= USB_ENDPOINT_XFER_CONTROL
,
85 .wMaxPacketSize
= cpu_to_le16(CTRL_PAYLOAD_MAX
),
88 static const struct usb_endpoint_descriptor
89 ctrl_endpt_in_desc
= {
90 .bLength
= USB_DT_ENDPOINT_SIZE
,
91 .bDescriptorType
= USB_DT_ENDPOINT
,
93 .bEndpointAddress
= USB_DIR_IN
,
94 .bmAttributes
= USB_ENDPOINT_XFER_CONTROL
,
95 .wMaxPacketSize
= cpu_to_le16(CTRL_PAYLOAD_MAX
),
99 static struct ci13xxx
*_udc
;
101 /* Interrupt statistics */
102 #define ISR_MASK 0x1F
119 * ffs_nr: find first (least significant) bit set
120 * @x: the word to search
122 * This function returns bit number (instead of position)
124 static int ffs_nr(u32 x
)
131 /******************************************************************************
133 *****************************************************************************/
134 /* register bank descriptor */
136 unsigned lpm
; /* is LPM? */
137 void __iomem
*abs
; /* bus map offset */
138 void __iomem
*cap
; /* bus map offset + CAP offset + CAP data */
139 size_t size
; /* bank size */
143 #define ABS_AHBBURST (0x0090UL)
144 #define ABS_AHBMODE (0x0098UL)
145 /* UDC register map */
146 #define ABS_CAPLENGTH (0x100UL)
147 #define ABS_HCCPARAMS (0x108UL)
148 #define ABS_DCCPARAMS (0x124UL)
149 #define ABS_TESTMODE (hw_bank.lpm ? 0x0FCUL : 0x138UL)
150 /* offset to CAPLENTGH (addr + data) */
151 #define CAP_USBCMD (0x000UL)
152 #define CAP_USBSTS (0x004UL)
153 #define CAP_USBINTR (0x008UL)
154 #define CAP_DEVICEADDR (0x014UL)
155 #define CAP_ENDPTLISTADDR (0x018UL)
156 #define CAP_PORTSC (0x044UL)
157 #define CAP_DEVLC (0x084UL)
158 #define CAP_USBMODE (hw_bank.lpm ? 0x0C8UL : 0x068UL)
159 #define CAP_ENDPTSETUPSTAT (hw_bank.lpm ? 0x0D8UL : 0x06CUL)
160 #define CAP_ENDPTPRIME (hw_bank.lpm ? 0x0DCUL : 0x070UL)
161 #define CAP_ENDPTFLUSH (hw_bank.lpm ? 0x0E0UL : 0x074UL)
162 #define CAP_ENDPTSTAT (hw_bank.lpm ? 0x0E4UL : 0x078UL)
163 #define CAP_ENDPTCOMPLETE (hw_bank.lpm ? 0x0E8UL : 0x07CUL)
164 #define CAP_ENDPTCTRL (hw_bank.lpm ? 0x0ECUL : 0x080UL)
165 #define CAP_LAST (hw_bank.lpm ? 0x12CUL : 0x0C0UL)
167 /* maximum number of enpoints: valid only after hw_device_reset() */
168 static unsigned hw_ep_max
;
171 * hw_ep_bit: calculates the bit number
172 * @num: endpoint number
173 * @dir: endpoint direction
175 * This function returns bit number
177 static inline int hw_ep_bit(int num
, int dir
)
179 return num
+ (dir
? 16 : 0);
183 * hw_aread: reads from register bitfield
184 * @addr: address relative to bus map
185 * @mask: bitfield mask
187 * This function returns register bitfield data
189 static u32
hw_aread(u32 addr
, u32 mask
)
191 return ioread32(addr
+ hw_bank
.abs
) & mask
;
195 * hw_awrite: writes to register bitfield
196 * @addr: address relative to bus map
197 * @mask: bitfield mask
200 static void hw_awrite(u32 addr
, u32 mask
, u32 data
)
202 iowrite32(hw_aread(addr
, ~mask
) | (data
& mask
),
207 * hw_cread: reads from register bitfield
208 * @addr: address relative to CAP offset plus content
209 * @mask: bitfield mask
211 * This function returns register bitfield data
213 static u32
hw_cread(u32 addr
, u32 mask
)
215 return ioread32(addr
+ hw_bank
.cap
) & mask
;
219 * hw_cwrite: writes to register bitfield
220 * @addr: address relative to CAP offset plus content
221 * @mask: bitfield mask
224 static void hw_cwrite(u32 addr
, u32 mask
, u32 data
)
226 iowrite32(hw_cread(addr
, ~mask
) | (data
& mask
),
231 * hw_ctest_and_clear: tests & clears register bitfield
232 * @addr: address relative to CAP offset plus content
233 * @mask: bitfield mask
235 * This function returns register bitfield data
237 static u32
hw_ctest_and_clear(u32 addr
, u32 mask
)
239 u32 reg
= hw_cread(addr
, mask
);
241 iowrite32(reg
, addr
+ hw_bank
.cap
);
246 * hw_ctest_and_write: tests & writes register bitfield
247 * @addr: address relative to CAP offset plus content
248 * @mask: bitfield mask
251 * This function returns register bitfield data
253 static u32
hw_ctest_and_write(u32 addr
, u32 mask
, u32 data
)
255 u32 reg
= hw_cread(addr
, ~0);
257 iowrite32((reg
& ~mask
) | (data
& mask
), addr
+ hw_bank
.cap
);
258 return (reg
& mask
) >> ffs_nr(mask
);
261 static int hw_device_init(void __iomem
*base
)
265 /* bank is a module variable */
268 hw_bank
.cap
= hw_bank
.abs
;
269 hw_bank
.cap
+= ABS_CAPLENGTH
;
270 hw_bank
.cap
+= ioread8(hw_bank
.cap
);
272 reg
= hw_aread(ABS_HCCPARAMS
, HCCPARAMS_LEN
) >> ffs_nr(HCCPARAMS_LEN
);
274 hw_bank
.size
= hw_bank
.cap
- hw_bank
.abs
;
275 hw_bank
.size
+= CAP_LAST
;
276 hw_bank
.size
/= sizeof(u32
);
278 reg
= hw_aread(ABS_DCCPARAMS
, DCCPARAMS_DEN
) >> ffs_nr(DCCPARAMS_DEN
);
279 hw_ep_max
= reg
* 2; /* cache hw ENDPT_MAX */
281 if (hw_ep_max
== 0 || hw_ep_max
> ENDPT_MAX
)
284 /* setup lock mode ? */
286 /* ENDPTSETUPSTAT is '0' by default */
288 /* HCSPARAMS.bf.ppc SHOULD BE zero for device */
293 * hw_device_reset: resets chip (execute without interruption)
294 * @base: register base address
296 * This function returns an error code
298 static int hw_device_reset(struct ci13xxx
*udc
)
300 /* should flush & stop before reset */
301 hw_cwrite(CAP_ENDPTFLUSH
, ~0, ~0);
302 hw_cwrite(CAP_USBCMD
, USBCMD_RS
, 0);
304 hw_cwrite(CAP_USBCMD
, USBCMD_RST
, USBCMD_RST
);
305 while (hw_cread(CAP_USBCMD
, USBCMD_RST
))
306 udelay(10); /* not RTOS friendly */
309 if (udc
->udc_driver
->notify_event
)
310 udc
->udc_driver
->notify_event(udc
,
311 CI13XXX_CONTROLLER_RESET_EVENT
);
313 if (udc
->udc_driver
->flags
& CI13XXX_DISABLE_STREAMING
)
314 hw_cwrite(CAP_USBMODE
, USBMODE_SDIS
, USBMODE_SDIS
);
316 /* USBMODE should be configured step by step */
317 hw_cwrite(CAP_USBMODE
, USBMODE_CM
, USBMODE_CM_IDLE
);
318 hw_cwrite(CAP_USBMODE
, USBMODE_CM
, USBMODE_CM_DEVICE
);
319 hw_cwrite(CAP_USBMODE
, USBMODE_SLOM
, USBMODE_SLOM
); /* HW >= 2.3 */
321 if (hw_cread(CAP_USBMODE
, USBMODE_CM
) != USBMODE_CM_DEVICE
) {
322 pr_err("cannot enter in device mode");
323 pr_err("lpm = %i", hw_bank
.lpm
);
331 * hw_device_state: enables/disables interrupts & starts/stops device (execute
332 * without interruption)
333 * @dma: 0 => disable, !0 => enable and set dma engine
335 * This function returns an error code
337 static int hw_device_state(u32 dma
)
340 hw_cwrite(CAP_ENDPTLISTADDR
, ~0, dma
);
341 /* interrupt, error, port change, reset, sleep/suspend */
342 hw_cwrite(CAP_USBINTR
, ~0,
343 USBi_UI
|USBi_UEI
|USBi_PCI
|USBi_URI
|USBi_SLI
);
344 hw_cwrite(CAP_USBCMD
, USBCMD_RS
, USBCMD_RS
);
346 hw_cwrite(CAP_USBCMD
, USBCMD_RS
, 0);
347 hw_cwrite(CAP_USBINTR
, ~0, 0);
353 * hw_ep_flush: flush endpoint fifo (execute without interruption)
354 * @num: endpoint number
355 * @dir: endpoint direction
357 * This function returns an error code
359 static int hw_ep_flush(int num
, int dir
)
361 int n
= hw_ep_bit(num
, dir
);
364 /* flush any pending transfer */
365 hw_cwrite(CAP_ENDPTFLUSH
, BIT(n
), BIT(n
));
366 while (hw_cread(CAP_ENDPTFLUSH
, BIT(n
)))
368 } while (hw_cread(CAP_ENDPTSTAT
, BIT(n
)));
374 * hw_ep_disable: disables endpoint (execute without interruption)
375 * @num: endpoint number
376 * @dir: endpoint direction
378 * This function returns an error code
380 static int hw_ep_disable(int num
, int dir
)
382 hw_ep_flush(num
, dir
);
383 hw_cwrite(CAP_ENDPTCTRL
+ num
* sizeof(u32
),
384 dir
? ENDPTCTRL_TXE
: ENDPTCTRL_RXE
, 0);
389 * hw_ep_enable: enables endpoint (execute without interruption)
390 * @num: endpoint number
391 * @dir: endpoint direction
392 * @type: endpoint type
394 * This function returns an error code
396 static int hw_ep_enable(int num
, int dir
, int type
)
401 mask
= ENDPTCTRL_TXT
; /* type */
402 data
= type
<< ffs_nr(mask
);
404 mask
|= ENDPTCTRL_TXS
; /* unstall */
405 mask
|= ENDPTCTRL_TXR
; /* reset data toggle */
406 data
|= ENDPTCTRL_TXR
;
407 mask
|= ENDPTCTRL_TXE
; /* enable */
408 data
|= ENDPTCTRL_TXE
;
410 mask
= ENDPTCTRL_RXT
; /* type */
411 data
= type
<< ffs_nr(mask
);
413 mask
|= ENDPTCTRL_RXS
; /* unstall */
414 mask
|= ENDPTCTRL_RXR
; /* reset data toggle */
415 data
|= ENDPTCTRL_RXR
;
416 mask
|= ENDPTCTRL_RXE
; /* enable */
417 data
|= ENDPTCTRL_RXE
;
419 hw_cwrite(CAP_ENDPTCTRL
+ num
* sizeof(u32
), mask
, data
);
424 * hw_ep_get_halt: return endpoint halt status
425 * @num: endpoint number
426 * @dir: endpoint direction
428 * This function returns 1 if endpoint halted
430 static int hw_ep_get_halt(int num
, int dir
)
432 u32 mask
= dir
? ENDPTCTRL_TXS
: ENDPTCTRL_RXS
;
434 return hw_cread(CAP_ENDPTCTRL
+ num
* sizeof(u32
), mask
) ? 1 : 0;
438 * hw_test_and_clear_setup_status: test & clear setup status (execute without
440 * @n: bit number (endpoint)
442 * This function returns setup status
444 static int hw_test_and_clear_setup_status(int n
)
446 return hw_ctest_and_clear(CAP_ENDPTSETUPSTAT
, BIT(n
));
450 * hw_ep_prime: primes endpoint (execute without interruption)
451 * @num: endpoint number
452 * @dir: endpoint direction
453 * @is_ctrl: true if control endpoint
455 * This function returns an error code
457 static int hw_ep_prime(int num
, int dir
, int is_ctrl
)
459 int n
= hw_ep_bit(num
, dir
);
461 if (is_ctrl
&& dir
== RX
&& hw_cread(CAP_ENDPTSETUPSTAT
, BIT(num
)))
464 hw_cwrite(CAP_ENDPTPRIME
, BIT(n
), BIT(n
));
466 while (hw_cread(CAP_ENDPTPRIME
, BIT(n
)))
468 if (is_ctrl
&& dir
== RX
&& hw_cread(CAP_ENDPTSETUPSTAT
, BIT(num
)))
471 /* status shoult be tested according with manual but it doesn't work */
476 * hw_ep_set_halt: configures ep halt & resets data toggle after clear (execute
477 * without interruption)
478 * @num: endpoint number
479 * @dir: endpoint direction
480 * @value: true => stall, false => unstall
482 * This function returns an error code
484 static int hw_ep_set_halt(int num
, int dir
, int value
)
486 if (value
!= 0 && value
!= 1)
490 u32 addr
= CAP_ENDPTCTRL
+ num
* sizeof(u32
);
491 u32 mask_xs
= dir
? ENDPTCTRL_TXS
: ENDPTCTRL_RXS
;
492 u32 mask_xr
= dir
? ENDPTCTRL_TXR
: ENDPTCTRL_RXR
;
494 /* data toggle - reserved for EP0 but it's in ESS */
495 hw_cwrite(addr
, mask_xs
|mask_xr
, value
? mask_xs
: mask_xr
);
497 } while (value
!= hw_ep_get_halt(num
, dir
));
503 * hw_intr_clear: disables interrupt & clears interrupt status (execute without
507 * This function returns an error code
509 static int hw_intr_clear(int n
)
514 hw_cwrite(CAP_USBINTR
, BIT(n
), 0);
515 hw_cwrite(CAP_USBSTS
, BIT(n
), BIT(n
));
520 * hw_intr_force: enables interrupt & forces interrupt status (execute without
524 * This function returns an error code
526 static int hw_intr_force(int n
)
531 hw_awrite(ABS_TESTMODE
, TESTMODE_FORCE
, TESTMODE_FORCE
);
532 hw_cwrite(CAP_USBINTR
, BIT(n
), BIT(n
));
533 hw_cwrite(CAP_USBSTS
, BIT(n
), BIT(n
));
534 hw_awrite(ABS_TESTMODE
, TESTMODE_FORCE
, 0);
539 * hw_is_port_high_speed: test if port is high speed
541 * This function returns true if high speed port
543 static int hw_port_is_high_speed(void)
545 return hw_bank
.lpm
? hw_cread(CAP_DEVLC
, DEVLC_PSPD
) :
546 hw_cread(CAP_PORTSC
, PORTSC_HSP
);
550 * hw_port_test_get: reads port test mode value
552 * This function returns port test mode value
554 static u8
hw_port_test_get(void)
556 return hw_cread(CAP_PORTSC
, PORTSC_PTC
) >> ffs_nr(PORTSC_PTC
);
560 * hw_port_test_set: writes port test mode (execute without interruption)
563 * This function returns an error code
565 static int hw_port_test_set(u8 mode
)
567 const u8 TEST_MODE_MAX
= 7;
569 if (mode
> TEST_MODE_MAX
)
572 hw_cwrite(CAP_PORTSC
, PORTSC_PTC
, mode
<< ffs_nr(PORTSC_PTC
));
577 * hw_read_intr_enable: returns interrupt enable register
579 * This function returns register data
581 static u32
hw_read_intr_enable(void)
583 return hw_cread(CAP_USBINTR
, ~0);
587 * hw_read_intr_status: returns interrupt status register
589 * This function returns register data
591 static u32
hw_read_intr_status(void)
593 return hw_cread(CAP_USBSTS
, ~0);
597 * hw_register_read: reads all device registers (execute without interruption)
598 * @buf: destination buffer
601 * This function returns number of registers read
603 static size_t hw_register_read(u32
*buf
, size_t size
)
607 if (size
> hw_bank
.size
)
610 for (i
= 0; i
< size
; i
++)
611 buf
[i
] = hw_aread(i
* sizeof(u32
), ~0);
617 * hw_register_write: writes to register
618 * @addr: register address
619 * @data: register value
621 * This function returns an error code
623 static int hw_register_write(u16 addr
, u32 data
)
628 if (addr
>= hw_bank
.size
)
634 hw_awrite(addr
, ~0, data
);
639 * hw_test_and_clear_complete: test & clear complete status (execute without
641 * @n: bit number (endpoint)
643 * This function returns complete status
645 static int hw_test_and_clear_complete(int n
)
647 return hw_ctest_and_clear(CAP_ENDPTCOMPLETE
, BIT(n
));
651 * hw_test_and_clear_intr_active: test & clear active interrupts (execute
652 * without interruption)
654 * This function returns active interrutps
656 static u32
hw_test_and_clear_intr_active(void)
658 u32 reg
= hw_read_intr_status() & hw_read_intr_enable();
660 hw_cwrite(CAP_USBSTS
, ~0, reg
);
665 * hw_test_and_clear_setup_guard: test & clear setup guard (execute without
668 * This function returns guard value
670 static int hw_test_and_clear_setup_guard(void)
672 return hw_ctest_and_write(CAP_USBCMD
, USBCMD_SUTW
, 0);
676 * hw_test_and_set_setup_guard: test & set setup guard (execute without
679 * This function returns guard value
681 static int hw_test_and_set_setup_guard(void)
683 return hw_ctest_and_write(CAP_USBCMD
, USBCMD_SUTW
, USBCMD_SUTW
);
687 * hw_usb_set_address: configures USB address (execute without interruption)
688 * @value: new USB address
690 * This function returns an error code
692 static int hw_usb_set_address(u8 value
)
695 hw_cwrite(CAP_DEVICEADDR
, DEVICEADDR_USBADR
| DEVICEADDR_USBADRA
,
696 value
<< ffs_nr(DEVICEADDR_USBADR
) | DEVICEADDR_USBADRA
);
701 * hw_usb_reset: restart device after a bus reset (execute without
704 * This function returns an error code
706 static int hw_usb_reset(void)
708 hw_usb_set_address(0);
710 /* ESS flushes only at end?!? */
711 hw_cwrite(CAP_ENDPTFLUSH
, ~0, ~0); /* flush all EPs */
713 /* clear setup token semaphores */
714 hw_cwrite(CAP_ENDPTSETUPSTAT
, 0, 0); /* writes its content */
716 /* clear complete status */
717 hw_cwrite(CAP_ENDPTCOMPLETE
, 0, 0); /* writes its content */
719 /* wait until all bits cleared */
720 while (hw_cread(CAP_ENDPTPRIME
, ~0))
721 udelay(10); /* not RTOS friendly */
723 /* reset all endpoints ? */
725 /* reset internal status and wait for further instructions
726 no need to verify the port reset status (ESS does it) */
731 /******************************************************************************
733 *****************************************************************************/
735 * show_device: prints information about device capabilities and status
737 * Check "device.h" for details
739 static ssize_t
show_device(struct device
*dev
, struct device_attribute
*attr
,
742 struct ci13xxx
*udc
= container_of(dev
, struct ci13xxx
, gadget
.dev
);
743 struct usb_gadget
*gadget
= &udc
->gadget
;
746 dbg_trace("[%s] %p\n", __func__
, buf
);
747 if (attr
== NULL
|| buf
== NULL
) {
748 dev_err(dev
, "[%s] EINVAL\n", __func__
);
752 n
+= scnprintf(buf
+ n
, PAGE_SIZE
- n
, "speed = %d\n",
754 n
+= scnprintf(buf
+ n
, PAGE_SIZE
- n
, "is_dualspeed = %d\n",
755 gadget
->is_dualspeed
);
756 n
+= scnprintf(buf
+ n
, PAGE_SIZE
- n
, "is_otg = %d\n",
758 n
+= scnprintf(buf
+ n
, PAGE_SIZE
- n
, "is_a_peripheral = %d\n",
759 gadget
->is_a_peripheral
);
760 n
+= scnprintf(buf
+ n
, PAGE_SIZE
- n
, "b_hnp_enable = %d\n",
761 gadget
->b_hnp_enable
);
762 n
+= scnprintf(buf
+ n
, PAGE_SIZE
- n
, "a_hnp_support = %d\n",
763 gadget
->a_hnp_support
);
764 n
+= scnprintf(buf
+ n
, PAGE_SIZE
- n
, "a_alt_hnp_support = %d\n",
765 gadget
->a_alt_hnp_support
);
766 n
+= scnprintf(buf
+ n
, PAGE_SIZE
- n
, "name = %s\n",
767 (gadget
->name
? gadget
->name
: ""));
771 static DEVICE_ATTR(device
, S_IRUSR
, show_device
, NULL
);
774 * show_driver: prints information about attached gadget (if any)
776 * Check "device.h" for details
778 static ssize_t
show_driver(struct device
*dev
, struct device_attribute
*attr
,
781 struct ci13xxx
*udc
= container_of(dev
, struct ci13xxx
, gadget
.dev
);
782 struct usb_gadget_driver
*driver
= udc
->driver
;
785 dbg_trace("[%s] %p\n", __func__
, buf
);
786 if (attr
== NULL
|| buf
== NULL
) {
787 dev_err(dev
, "[%s] EINVAL\n", __func__
);
792 return scnprintf(buf
, PAGE_SIZE
,
793 "There is no gadget attached!\n");
795 n
+= scnprintf(buf
+ n
, PAGE_SIZE
- n
, "function = %s\n",
796 (driver
->function
? driver
->function
: ""));
797 n
+= scnprintf(buf
+ n
, PAGE_SIZE
- n
, "max speed = %d\n",
802 static DEVICE_ATTR(driver
, S_IRUSR
, show_driver
, NULL
);
804 /* Maximum event message length */
805 #define DBG_DATA_MSG 64UL
807 /* Maximum event messages */
808 #define DBG_DATA_MAX 128UL
810 /* Event buffer descriptor */
812 char (buf
[DBG_DATA_MAX
])[DBG_DATA_MSG
]; /* buffer */
813 unsigned idx
; /* index */
814 unsigned tty
; /* print to console? */
815 rwlock_t lck
; /* lock */
819 .lck
= __RW_LOCK_UNLOCKED(lck
)
823 * dbg_dec: decrements debug event index
826 static void dbg_dec(unsigned *idx
)
828 *idx
= (*idx
- 1) & (DBG_DATA_MAX
-1);
832 * dbg_inc: increments debug event index
835 static void dbg_inc(unsigned *idx
)
837 *idx
= (*idx
+ 1) & (DBG_DATA_MAX
-1);
841 * dbg_print: prints the common part of the event
842 * @addr: endpoint address
845 * @extra: extra information
847 static void dbg_print(u8 addr
, const char *name
, int status
, const char *extra
)
853 write_lock_irqsave(&dbg_data
.lck
, flags
);
855 do_gettimeofday(&tval
);
856 stamp
= tval
.tv_sec
& 0xFFFF; /* 2^32 = 4294967296. Limit to 4096s */
857 stamp
= stamp
* 1000000 + tval
.tv_usec
;
859 scnprintf(dbg_data
.buf
[dbg_data
.idx
], DBG_DATA_MSG
,
860 "%04X\t? %02X %-7.7s %4i ?\t%s\n",
861 stamp
, addr
, name
, status
, extra
);
863 dbg_inc(&dbg_data
.idx
);
865 write_unlock_irqrestore(&dbg_data
.lck
, flags
);
867 if (dbg_data
.tty
!= 0)
868 pr_notice("%04X\t? %02X %-7.7s %4i ?\t%s\n",
869 stamp
, addr
, name
, status
, extra
);
873 * dbg_done: prints a DONE event
874 * @addr: endpoint address
875 * @td: transfer descriptor
878 static void dbg_done(u8 addr
, const u32 token
, int status
)
880 char msg
[DBG_DATA_MSG
];
882 scnprintf(msg
, sizeof(msg
), "%d %02X",
883 (int)(token
& TD_TOTAL_BYTES
) >> ffs_nr(TD_TOTAL_BYTES
),
884 (int)(token
& TD_STATUS
) >> ffs_nr(TD_STATUS
));
885 dbg_print(addr
, "DONE", status
, msg
);
889 * dbg_event: prints a generic event
890 * @addr: endpoint address
894 static void dbg_event(u8 addr
, const char *name
, int status
)
897 dbg_print(addr
, name
, status
, "");
901 * dbg_queue: prints a QUEUE event
902 * @addr: endpoint address
906 static void dbg_queue(u8 addr
, const struct usb_request
*req
, int status
)
908 char msg
[DBG_DATA_MSG
];
911 scnprintf(msg
, sizeof(msg
),
912 "%d %d", !req
->no_interrupt
, req
->length
);
913 dbg_print(addr
, "QUEUE", status
, msg
);
918 * dbg_setup: prints a SETUP event
919 * @addr: endpoint address
920 * @req: setup request
922 static void dbg_setup(u8 addr
, const struct usb_ctrlrequest
*req
)
924 char msg
[DBG_DATA_MSG
];
927 scnprintf(msg
, sizeof(msg
),
928 "%02X %02X %04X %04X %d", req
->bRequestType
,
929 req
->bRequest
, le16_to_cpu(req
->wValue
),
930 le16_to_cpu(req
->wIndex
), le16_to_cpu(req
->wLength
));
931 dbg_print(addr
, "SETUP", 0, msg
);
936 * show_events: displays the event buffer
938 * Check "device.h" for details
940 static ssize_t
show_events(struct device
*dev
, struct device_attribute
*attr
,
944 unsigned i
, j
, n
= 0;
946 dbg_trace("[%s] %p\n", __func__
, buf
);
947 if (attr
== NULL
|| buf
== NULL
) {
948 dev_err(dev
, "[%s] EINVAL\n", __func__
);
952 read_lock_irqsave(&dbg_data
.lck
, flags
);
955 for (dbg_dec(&i
); i
!= dbg_data
.idx
; dbg_dec(&i
)) {
956 n
+= strlen(dbg_data
.buf
[i
]);
957 if (n
>= PAGE_SIZE
) {
958 n
-= strlen(dbg_data
.buf
[i
]);
962 for (j
= 0, dbg_inc(&i
); j
< n
; dbg_inc(&i
))
963 j
+= scnprintf(buf
+ j
, PAGE_SIZE
- j
,
964 "%s", dbg_data
.buf
[i
]);
966 read_unlock_irqrestore(&dbg_data
.lck
, flags
);
972 * store_events: configure if events are going to be also printed to console
974 * Check "device.h" for details
976 static ssize_t
store_events(struct device
*dev
, struct device_attribute
*attr
,
977 const char *buf
, size_t count
)
981 dbg_trace("[%s] %p, %d\n", __func__
, buf
, count
);
982 if (attr
== NULL
|| buf
== NULL
) {
983 dev_err(dev
, "[%s] EINVAL\n", __func__
);
987 if (sscanf(buf
, "%u", &tty
) != 1 || tty
> 1) {
988 dev_err(dev
, "<1|0>: enable|disable console log\n");
993 dev_info(dev
, "tty = %u", dbg_data
.tty
);
998 static DEVICE_ATTR(events
, S_IRUSR
| S_IWUSR
, show_events
, store_events
);
1001 * show_inters: interrupt status, enable status and historic
1003 * Check "device.h" for details
1005 static ssize_t
show_inters(struct device
*dev
, struct device_attribute
*attr
,
1008 struct ci13xxx
*udc
= container_of(dev
, struct ci13xxx
, gadget
.dev
);
1009 unsigned long flags
;
1011 unsigned i
, j
, n
= 0;
1013 dbg_trace("[%s] %p\n", __func__
, buf
);
1014 if (attr
== NULL
|| buf
== NULL
) {
1015 dev_err(dev
, "[%s] EINVAL\n", __func__
);
1019 spin_lock_irqsave(udc
->lock
, flags
);
1021 n
+= scnprintf(buf
+ n
, PAGE_SIZE
- n
,
1022 "status = %08x\n", hw_read_intr_status());
1023 n
+= scnprintf(buf
+ n
, PAGE_SIZE
- n
,
1024 "enable = %08x\n", hw_read_intr_enable());
1026 n
+= scnprintf(buf
+ n
, PAGE_SIZE
- n
, "*test = %d\n",
1027 isr_statistics
.test
);
1028 n
+= scnprintf(buf
+ n
, PAGE_SIZE
- n
, "? ui = %d\n",
1030 n
+= scnprintf(buf
+ n
, PAGE_SIZE
- n
, "? uei = %d\n",
1031 isr_statistics
.uei
);
1032 n
+= scnprintf(buf
+ n
, PAGE_SIZE
- n
, "? pci = %d\n",
1033 isr_statistics
.pci
);
1034 n
+= scnprintf(buf
+ n
, PAGE_SIZE
- n
, "? uri = %d\n",
1035 isr_statistics
.uri
);
1036 n
+= scnprintf(buf
+ n
, PAGE_SIZE
- n
, "? sli = %d\n",
1037 isr_statistics
.sli
);
1038 n
+= scnprintf(buf
+ n
, PAGE_SIZE
- n
, "*none = %d\n",
1039 isr_statistics
.none
);
1040 n
+= scnprintf(buf
+ n
, PAGE_SIZE
- n
, "*hndl = %d\n",
1041 isr_statistics
.hndl
.cnt
);
1043 for (i
= isr_statistics
.hndl
.idx
, j
= 0; j
<= ISR_MASK
; j
++, i
++) {
1045 intr
= isr_statistics
.hndl
.buf
[i
];
1048 n
+= scnprintf(buf
+ n
, PAGE_SIZE
- n
, "ui ");
1050 if (USBi_UEI
& intr
)
1051 n
+= scnprintf(buf
+ n
, PAGE_SIZE
- n
, "uei ");
1053 if (USBi_PCI
& intr
)
1054 n
+= scnprintf(buf
+ n
, PAGE_SIZE
- n
, "pci ");
1056 if (USBi_URI
& intr
)
1057 n
+= scnprintf(buf
+ n
, PAGE_SIZE
- n
, "uri ");
1059 if (USBi_SLI
& intr
)
1060 n
+= scnprintf(buf
+ n
, PAGE_SIZE
- n
, "sli ");
1063 n
+= scnprintf(buf
+ n
, PAGE_SIZE
- n
, "??? ");
1064 if (isr_statistics
.hndl
.buf
[i
])
1065 n
+= scnprintf(buf
+ n
, PAGE_SIZE
- n
, "\n");
1068 spin_unlock_irqrestore(udc
->lock
, flags
);
1074 * store_inters: enable & force or disable an individual interrutps
1075 * (to be used for test purposes only)
1077 * Check "device.h" for details
1079 static ssize_t
store_inters(struct device
*dev
, struct device_attribute
*attr
,
1080 const char *buf
, size_t count
)
1082 struct ci13xxx
*udc
= container_of(dev
, struct ci13xxx
, gadget
.dev
);
1083 unsigned long flags
;
1086 dbg_trace("[%s] %p, %d\n", __func__
, buf
, count
);
1087 if (attr
== NULL
|| buf
== NULL
) {
1088 dev_err(dev
, "[%s] EINVAL\n", __func__
);
1092 if (sscanf(buf
, "%u %u", &en
, &bit
) != 2 || en
> 1) {
1093 dev_err(dev
, "<1|0> <bit>: enable|disable interrupt");
1097 spin_lock_irqsave(udc
->lock
, flags
);
1099 if (hw_intr_force(bit
))
1100 dev_err(dev
, "invalid bit number\n");
1102 isr_statistics
.test
++;
1104 if (hw_intr_clear(bit
))
1105 dev_err(dev
, "invalid bit number\n");
1107 spin_unlock_irqrestore(udc
->lock
, flags
);
1112 static DEVICE_ATTR(inters
, S_IRUSR
| S_IWUSR
, show_inters
, store_inters
);
1115 * show_port_test: reads port test mode
1117 * Check "device.h" for details
1119 static ssize_t
show_port_test(struct device
*dev
,
1120 struct device_attribute
*attr
, char *buf
)
1122 struct ci13xxx
*udc
= container_of(dev
, struct ci13xxx
, gadget
.dev
);
1123 unsigned long flags
;
1126 dbg_trace("[%s] %p\n", __func__
, buf
);
1127 if (attr
== NULL
|| buf
== NULL
) {
1128 dev_err(dev
, "[%s] EINVAL\n", __func__
);
1132 spin_lock_irqsave(udc
->lock
, flags
);
1133 mode
= hw_port_test_get();
1134 spin_unlock_irqrestore(udc
->lock
, flags
);
1136 return scnprintf(buf
, PAGE_SIZE
, "mode = %u\n", mode
);
1140 * store_port_test: writes port test mode
1142 * Check "device.h" for details
1144 static ssize_t
store_port_test(struct device
*dev
,
1145 struct device_attribute
*attr
,
1146 const char *buf
, size_t count
)
1148 struct ci13xxx
*udc
= container_of(dev
, struct ci13xxx
, gadget
.dev
);
1149 unsigned long flags
;
1152 dbg_trace("[%s] %p, %d\n", __func__
, buf
, count
);
1153 if (attr
== NULL
|| buf
== NULL
) {
1154 dev_err(dev
, "[%s] EINVAL\n", __func__
);
1158 if (sscanf(buf
, "%u", &mode
) != 1) {
1159 dev_err(dev
, "<mode>: set port test mode");
1163 spin_lock_irqsave(udc
->lock
, flags
);
1164 if (hw_port_test_set(mode
))
1165 dev_err(dev
, "invalid mode\n");
1166 spin_unlock_irqrestore(udc
->lock
, flags
);
1171 static DEVICE_ATTR(port_test
, S_IRUSR
| S_IWUSR
,
1172 show_port_test
, store_port_test
);
1175 * show_qheads: DMA contents of all queue heads
1177 * Check "device.h" for details
1179 static ssize_t
show_qheads(struct device
*dev
, struct device_attribute
*attr
,
1182 struct ci13xxx
*udc
= container_of(dev
, struct ci13xxx
, gadget
.dev
);
1183 unsigned long flags
;
1184 unsigned i
, j
, n
= 0;
1186 dbg_trace("[%s] %p\n", __func__
, buf
);
1187 if (attr
== NULL
|| buf
== NULL
) {
1188 dev_err(dev
, "[%s] EINVAL\n", __func__
);
1192 spin_lock_irqsave(udc
->lock
, flags
);
1193 for (i
= 0; i
< hw_ep_max
/2; i
++) {
1194 struct ci13xxx_ep
*mEpRx
= &udc
->ci13xxx_ep
[i
];
1195 struct ci13xxx_ep
*mEpTx
= &udc
->ci13xxx_ep
[i
+ hw_ep_max
/2];
1196 n
+= scnprintf(buf
+ n
, PAGE_SIZE
- n
,
1197 "EP=%02i: RX=%08X TX=%08X\n",
1198 i
, (u32
)mEpRx
->qh
.dma
, (u32
)mEpTx
->qh
.dma
);
1199 for (j
= 0; j
< (sizeof(struct ci13xxx_qh
)/sizeof(u32
)); j
++) {
1200 n
+= scnprintf(buf
+ n
, PAGE_SIZE
- n
,
1201 " %04X: %08X %08X\n", j
,
1202 *((u32
*)mEpRx
->qh
.ptr
+ j
),
1203 *((u32
*)mEpTx
->qh
.ptr
+ j
));
1206 spin_unlock_irqrestore(udc
->lock
, flags
);
1210 static DEVICE_ATTR(qheads
, S_IRUSR
, show_qheads
, NULL
);
1213 * show_registers: dumps all registers
1215 * Check "device.h" for details
1217 #define DUMP_ENTRIES 512
1218 static ssize_t
show_registers(struct device
*dev
,
1219 struct device_attribute
*attr
, char *buf
)
1221 struct ci13xxx
*udc
= container_of(dev
, struct ci13xxx
, gadget
.dev
);
1222 unsigned long flags
;
1224 unsigned i
, k
, n
= 0;
1226 dbg_trace("[%s] %p\n", __func__
, buf
);
1227 if (attr
== NULL
|| buf
== NULL
) {
1228 dev_err(dev
, "[%s] EINVAL\n", __func__
);
1232 dump
= kmalloc(sizeof(u32
) * DUMP_ENTRIES
, GFP_KERNEL
);
1234 dev_err(dev
, "%s: out of memory\n", __func__
);
1238 spin_lock_irqsave(udc
->lock
, flags
);
1239 k
= hw_register_read(dump
, DUMP_ENTRIES
);
1240 spin_unlock_irqrestore(udc
->lock
, flags
);
1242 for (i
= 0; i
< k
; i
++) {
1243 n
+= scnprintf(buf
+ n
, PAGE_SIZE
- n
,
1244 "reg[0x%04X] = 0x%08X\n",
1245 i
* (unsigned)sizeof(u32
), dump
[i
]);
1253 * store_registers: writes value to register address
1255 * Check "device.h" for details
1257 static ssize_t
store_registers(struct device
*dev
,
1258 struct device_attribute
*attr
,
1259 const char *buf
, size_t count
)
1261 struct ci13xxx
*udc
= container_of(dev
, struct ci13xxx
, gadget
.dev
);
1262 unsigned long addr
, data
, flags
;
1264 dbg_trace("[%s] %p, %d\n", __func__
, buf
, count
);
1265 if (attr
== NULL
|| buf
== NULL
) {
1266 dev_err(dev
, "[%s] EINVAL\n", __func__
);
1270 if (sscanf(buf
, "%li %li", &addr
, &data
) != 2) {
1271 dev_err(dev
, "<addr> <data>: write data to register address");
1275 spin_lock_irqsave(udc
->lock
, flags
);
1276 if (hw_register_write(addr
, data
))
1277 dev_err(dev
, "invalid address range\n");
1278 spin_unlock_irqrestore(udc
->lock
, flags
);
1283 static DEVICE_ATTR(registers
, S_IRUSR
| S_IWUSR
,
1284 show_registers
, store_registers
);
1287 * show_requests: DMA contents of all requests currently queued (all endpts)
1289 * Check "device.h" for details
1291 static ssize_t
show_requests(struct device
*dev
, struct device_attribute
*attr
,
1294 struct ci13xxx
*udc
= container_of(dev
, struct ci13xxx
, gadget
.dev
);
1295 unsigned long flags
;
1296 struct list_head
*ptr
= NULL
;
1297 struct ci13xxx_req
*req
= NULL
;
1298 unsigned i
, j
, n
= 0, qSize
= sizeof(struct ci13xxx_td
)/sizeof(u32
);
1300 dbg_trace("[%s] %p\n", __func__
, buf
);
1301 if (attr
== NULL
|| buf
== NULL
) {
1302 dev_err(dev
, "[%s] EINVAL\n", __func__
);
1306 spin_lock_irqsave(udc
->lock
, flags
);
1307 for (i
= 0; i
< hw_ep_max
; i
++)
1308 list_for_each(ptr
, &udc
->ci13xxx_ep
[i
].qh
.queue
)
1310 req
= list_entry(ptr
, struct ci13xxx_req
, queue
);
1312 n
+= scnprintf(buf
+ n
, PAGE_SIZE
- n
,
1313 "EP=%02i: TD=%08X %s\n",
1314 i
% hw_ep_max
/2, (u32
)req
->dma
,
1315 ((i
< hw_ep_max
/2) ? "RX" : "TX"));
1317 for (j
= 0; j
< qSize
; j
++)
1318 n
+= scnprintf(buf
+ n
, PAGE_SIZE
- n
,
1320 *((u32
*)req
->ptr
+ j
));
1322 spin_unlock_irqrestore(udc
->lock
, flags
);
1326 static DEVICE_ATTR(requests
, S_IRUSR
, show_requests
, NULL
);
1329 * dbg_create_files: initializes the attribute interface
1332 * This function returns an error code
1334 __maybe_unused
static int dbg_create_files(struct device
*dev
)
1340 retval
= device_create_file(dev
, &dev_attr_device
);
1343 retval
= device_create_file(dev
, &dev_attr_driver
);
1346 retval
= device_create_file(dev
, &dev_attr_events
);
1349 retval
= device_create_file(dev
, &dev_attr_inters
);
1352 retval
= device_create_file(dev
, &dev_attr_port_test
);
1355 retval
= device_create_file(dev
, &dev_attr_qheads
);
1358 retval
= device_create_file(dev
, &dev_attr_registers
);
1361 retval
= device_create_file(dev
, &dev_attr_requests
);
1367 device_remove_file(dev
, &dev_attr_registers
);
1369 device_remove_file(dev
, &dev_attr_qheads
);
1371 device_remove_file(dev
, &dev_attr_port_test
);
1373 device_remove_file(dev
, &dev_attr_inters
);
1375 device_remove_file(dev
, &dev_attr_events
);
1377 device_remove_file(dev
, &dev_attr_driver
);
1379 device_remove_file(dev
, &dev_attr_device
);
1385 * dbg_remove_files: destroys the attribute interface
1388 * This function returns an error code
1390 __maybe_unused
static int dbg_remove_files(struct device
*dev
)
1394 device_remove_file(dev
, &dev_attr_requests
);
1395 device_remove_file(dev
, &dev_attr_registers
);
1396 device_remove_file(dev
, &dev_attr_qheads
);
1397 device_remove_file(dev
, &dev_attr_port_test
);
1398 device_remove_file(dev
, &dev_attr_inters
);
1399 device_remove_file(dev
, &dev_attr_events
);
1400 device_remove_file(dev
, &dev_attr_driver
);
1401 device_remove_file(dev
, &dev_attr_device
);
1405 /******************************************************************************
1407 *****************************************************************************/
1409 * _usb_addr: calculates endpoint address from direction & number
1412 static inline u8
_usb_addr(struct ci13xxx_ep
*ep
)
1414 return ((ep
->dir
== TX
) ? USB_ENDPOINT_DIR_MASK
: 0) | ep
->num
;
1418 * _hardware_queue: configures a request at hardware level
1422 * This function returns an error code
1424 static int _hardware_enqueue(struct ci13xxx_ep
*mEp
, struct ci13xxx_req
*mReq
)
1428 unsigned length
= mReq
->req
.length
;
1430 trace("%p, %p", mEp
, mReq
);
1432 /* don't queue twice */
1433 if (mReq
->req
.status
== -EALREADY
)
1436 mReq
->req
.status
= -EALREADY
;
1437 if (length
&& !mReq
->req
.dma
) {
1439 dma_map_single(mEp
->device
, mReq
->req
.buf
,
1440 length
, mEp
->dir
? DMA_TO_DEVICE
:
1442 if (mReq
->req
.dma
== 0)
1448 if (mReq
->req
.zero
&& length
&& (length
% mEp
->ep
.maxpacket
== 0)) {
1449 mReq
->zptr
= dma_pool_alloc(mEp
->td_pool
, GFP_ATOMIC
,
1451 if (mReq
->zptr
== NULL
) {
1453 dma_unmap_single(mEp
->device
, mReq
->req
.dma
,
1454 length
, mEp
->dir
? DMA_TO_DEVICE
:
1461 memset(mReq
->zptr
, 0, sizeof(*mReq
->zptr
));
1462 mReq
->zptr
->next
= TD_TERMINATE
;
1463 mReq
->zptr
->token
= TD_STATUS_ACTIVE
;
1464 if (!mReq
->req
.no_interrupt
)
1465 mReq
->zptr
->token
|= TD_IOC
;
1469 * TODO - handle requests which spawns into several TDs
1471 memset(mReq
->ptr
, 0, sizeof(*mReq
->ptr
));
1472 mReq
->ptr
->token
= length
<< ffs_nr(TD_TOTAL_BYTES
);
1473 mReq
->ptr
->token
&= TD_TOTAL_BYTES
;
1474 mReq
->ptr
->token
|= TD_STATUS_ACTIVE
;
1476 mReq
->ptr
->next
= mReq
->zdma
;
1478 mReq
->ptr
->next
= TD_TERMINATE
;
1479 if (!mReq
->req
.no_interrupt
)
1480 mReq
->ptr
->token
|= TD_IOC
;
1482 mReq
->ptr
->page
[0] = mReq
->req
.dma
;
1483 for (i
= 1; i
< 5; i
++)
1484 mReq
->ptr
->page
[i
] =
1485 (mReq
->req
.dma
+ i
* CI13XXX_PAGE_SIZE
) & ~TD_RESERVED_MASK
;
1487 if (!list_empty(&mEp
->qh
.queue
)) {
1488 struct ci13xxx_req
*mReqPrev
;
1489 int n
= hw_ep_bit(mEp
->num
, mEp
->dir
);
1492 mReqPrev
= list_entry(mEp
->qh
.queue
.prev
,
1493 struct ci13xxx_req
, queue
);
1495 mReqPrev
->zptr
->next
= mReq
->dma
& TD_ADDR_MASK
;
1497 mReqPrev
->ptr
->next
= mReq
->dma
& TD_ADDR_MASK
;
1499 if (hw_cread(CAP_ENDPTPRIME
, BIT(n
)))
1502 hw_cwrite(CAP_USBCMD
, USBCMD_ATDTW
, USBCMD_ATDTW
);
1503 tmp_stat
= hw_cread(CAP_ENDPTSTAT
, BIT(n
));
1504 } while (!hw_cread(CAP_USBCMD
, USBCMD_ATDTW
));
1505 hw_cwrite(CAP_USBCMD
, USBCMD_ATDTW
, 0);
1510 /* QH configuration */
1511 mEp
->qh
.ptr
->td
.next
= mReq
->dma
; /* TERMINATE = 0 */
1512 mEp
->qh
.ptr
->td
.token
&= ~TD_STATUS
; /* clear status */
1513 mEp
->qh
.ptr
->cap
|= QH_ZLT
;
1515 wmb(); /* synchronize before ep prime */
1517 ret
= hw_ep_prime(mEp
->num
, mEp
->dir
,
1518 mEp
->type
== USB_ENDPOINT_XFER_CONTROL
);
1524 * _hardware_dequeue: handles a request at hardware level
1528 * This function returns an error code
1530 static int _hardware_dequeue(struct ci13xxx_ep
*mEp
, struct ci13xxx_req
*mReq
)
1532 trace("%p, %p", mEp
, mReq
);
1534 if (mReq
->req
.status
!= -EALREADY
)
1537 if ((TD_STATUS_ACTIVE
& mReq
->ptr
->token
) != 0)
1541 if ((TD_STATUS_ACTIVE
& mReq
->zptr
->token
) != 0)
1543 dma_pool_free(mEp
->td_pool
, mReq
->zptr
, mReq
->zdma
);
1547 mReq
->req
.status
= 0;
1550 dma_unmap_single(mEp
->device
, mReq
->req
.dma
, mReq
->req
.length
,
1551 mEp
->dir
? DMA_TO_DEVICE
: DMA_FROM_DEVICE
);
1556 mReq
->req
.status
= mReq
->ptr
->token
& TD_STATUS
;
1557 if ((TD_STATUS_HALTED
& mReq
->req
.status
) != 0)
1558 mReq
->req
.status
= -1;
1559 else if ((TD_STATUS_DT_ERR
& mReq
->req
.status
) != 0)
1560 mReq
->req
.status
= -1;
1561 else if ((TD_STATUS_TR_ERR
& mReq
->req
.status
) != 0)
1562 mReq
->req
.status
= -1;
1564 mReq
->req
.actual
= mReq
->ptr
->token
& TD_TOTAL_BYTES
;
1565 mReq
->req
.actual
>>= ffs_nr(TD_TOTAL_BYTES
);
1566 mReq
->req
.actual
= mReq
->req
.length
- mReq
->req
.actual
;
1567 mReq
->req
.actual
= mReq
->req
.status
? 0 : mReq
->req
.actual
;
1569 return mReq
->req
.actual
;
1573 * _ep_nuke: dequeues all endpoint requests
1576 * This function returns an error code
1577 * Caller must hold lock
1579 static int _ep_nuke(struct ci13xxx_ep
*mEp
)
1580 __releases(mEp
->lock
)
1581 __acquires(mEp
->lock
)
1588 hw_ep_flush(mEp
->num
, mEp
->dir
);
1590 while (!list_empty(&mEp
->qh
.queue
)) {
1592 /* pop oldest request */
1593 struct ci13xxx_req
*mReq
= \
1594 list_entry(mEp
->qh
.queue
.next
,
1595 struct ci13xxx_req
, queue
);
1596 list_del_init(&mReq
->queue
);
1597 mReq
->req
.status
= -ESHUTDOWN
;
1599 if (mReq
->req
.complete
!= NULL
) {
1600 spin_unlock(mEp
->lock
);
1601 mReq
->req
.complete(&mEp
->ep
, &mReq
->req
);
1602 spin_lock(mEp
->lock
);
1609 * _gadget_stop_activity: stops all USB activity, flushes & disables all endpts
1612 * This function returns an error code
1613 * Caller must hold lock
1615 static int _gadget_stop_activity(struct usb_gadget
*gadget
)
1618 struct ci13xxx
*udc
= container_of(gadget
, struct ci13xxx
, gadget
);
1619 unsigned long flags
;
1621 trace("%p", gadget
);
1626 spin_lock_irqsave(udc
->lock
, flags
);
1627 udc
->gadget
.speed
= USB_SPEED_UNKNOWN
;
1628 udc
->remote_wakeup
= 0;
1630 spin_unlock_irqrestore(udc
->lock
, flags
);
1632 /* flush all endpoints */
1633 gadget_for_each_ep(ep
, gadget
) {
1634 usb_ep_fifo_flush(ep
);
1636 usb_ep_fifo_flush(&udc
->ep0out
.ep
);
1637 usb_ep_fifo_flush(&udc
->ep0in
.ep
);
1639 udc
->driver
->disconnect(gadget
);
1641 /* make sure to disable all endpoints */
1642 gadget_for_each_ep(ep
, gadget
) {
1646 if (udc
->status
!= NULL
) {
1647 usb_ep_free_request(&udc
->ep0in
.ep
, udc
->status
);
1654 /******************************************************************************
1656 *****************************************************************************/
1658 * isr_reset_handler: USB reset interrupt handler
1661 * This function resets USB engine after a bus reset occurred
1663 static void isr_reset_handler(struct ci13xxx
*udc
)
1664 __releases(udc
->lock
)
1665 __acquires(udc
->lock
)
1676 dbg_event(0xFF, "BUS RST", 0);
1678 spin_unlock(udc
->lock
);
1679 retval
= _gadget_stop_activity(&udc
->gadget
);
1683 retval
= hw_usb_reset();
1687 udc
->status
= usb_ep_alloc_request(&udc
->ep0in
.ep
, GFP_ATOMIC
);
1688 if (udc
->status
== NULL
)
1691 spin_lock(udc
->lock
);
1695 err("error: %i", retval
);
1699 * isr_get_status_complete: get_status request complete function
1701 * @req: request handled
1703 * Caller must release lock
1705 static void isr_get_status_complete(struct usb_ep
*ep
, struct usb_request
*req
)
1707 trace("%p, %p", ep
, req
);
1709 if (ep
== NULL
|| req
== NULL
) {
1715 usb_ep_free_request(ep
, req
);
1719 * isr_get_status_response: get_status request response
1721 * @setup: setup request packet
1723 * This function returns an error code
1725 static int isr_get_status_response(struct ci13xxx
*udc
,
1726 struct usb_ctrlrequest
*setup
)
1727 __releases(mEp
->lock
)
1728 __acquires(mEp
->lock
)
1730 struct ci13xxx_ep
*mEp
= &udc
->ep0in
;
1731 struct usb_request
*req
= NULL
;
1732 gfp_t gfp_flags
= GFP_ATOMIC
;
1733 int dir
, num
, retval
;
1735 trace("%p, %p", mEp
, setup
);
1737 if (mEp
== NULL
|| setup
== NULL
)
1740 spin_unlock(mEp
->lock
);
1741 req
= usb_ep_alloc_request(&mEp
->ep
, gfp_flags
);
1742 spin_lock(mEp
->lock
);
1746 req
->complete
= isr_get_status_complete
;
1748 req
->buf
= kzalloc(req
->length
, gfp_flags
);
1749 if (req
->buf
== NULL
) {
1754 if ((setup
->bRequestType
& USB_RECIP_MASK
) == USB_RECIP_DEVICE
) {
1755 /* Assume that device is bus powered for now. */
1756 *((u16
*)req
->buf
) = _udc
->remote_wakeup
<< 1;
1758 } else if ((setup
->bRequestType
& USB_RECIP_MASK
) \
1759 == USB_RECIP_ENDPOINT
) {
1760 dir
= (le16_to_cpu(setup
->wIndex
) & USB_ENDPOINT_DIR_MASK
) ?
1762 num
= le16_to_cpu(setup
->wIndex
) & USB_ENDPOINT_NUMBER_MASK
;
1763 *((u16
*)req
->buf
) = hw_ep_get_halt(num
, dir
);
1765 /* else do nothing; reserved for future use */
1767 spin_unlock(mEp
->lock
);
1768 retval
= usb_ep_queue(&mEp
->ep
, req
, gfp_flags
);
1769 spin_lock(mEp
->lock
);
1778 spin_unlock(mEp
->lock
);
1779 usb_ep_free_request(&mEp
->ep
, req
);
1780 spin_lock(mEp
->lock
);
1785 * isr_setup_status_complete: setup_status request complete function
1787 * @req: request handled
1789 * Caller must release lock. Put the port in test mode if test mode
1790 * feature is selected.
1793 isr_setup_status_complete(struct usb_ep
*ep
, struct usb_request
*req
)
1795 struct ci13xxx
*udc
= req
->context
;
1796 unsigned long flags
;
1798 trace("%p, %p", ep
, req
);
1800 spin_lock_irqsave(udc
->lock
, flags
);
1802 hw_port_test_set(udc
->test_mode
);
1803 spin_unlock_irqrestore(udc
->lock
, flags
);
1807 * isr_setup_status_phase: queues the status phase of a setup transation
1810 * This function returns an error code
1812 static int isr_setup_status_phase(struct ci13xxx
*udc
)
1813 __releases(mEp
->lock
)
1814 __acquires(mEp
->lock
)
1817 struct ci13xxx_ep
*mEp
;
1821 mEp
= (udc
->ep0_dir
== TX
) ? &udc
->ep0out
: &udc
->ep0in
;
1822 udc
->status
->context
= udc
;
1823 udc
->status
->complete
= isr_setup_status_complete
;
1825 spin_unlock(mEp
->lock
);
1826 retval
= usb_ep_queue(&mEp
->ep
, udc
->status
, GFP_ATOMIC
);
1827 spin_lock(mEp
->lock
);
1833 * isr_tr_complete_low: transaction complete low level handler
1836 * This function returns an error code
1837 * Caller must hold lock
1839 static int isr_tr_complete_low(struct ci13xxx_ep
*mEp
)
1840 __releases(mEp
->lock
)
1841 __acquires(mEp
->lock
)
1843 struct ci13xxx_req
*mReq
, *mReqTemp
;
1844 struct ci13xxx_ep
*mEpTemp
= mEp
;
1845 int uninitialized_var(retval
);
1849 if (list_empty(&mEp
->qh
.queue
))
1852 list_for_each_entry_safe(mReq
, mReqTemp
, &mEp
->qh
.queue
,
1854 retval
= _hardware_dequeue(mEp
, mReq
);
1857 list_del_init(&mReq
->queue
);
1858 dbg_done(_usb_addr(mEp
), mReq
->ptr
->token
, retval
);
1859 if (mReq
->req
.complete
!= NULL
) {
1860 spin_unlock(mEp
->lock
);
1861 if ((mEp
->type
== USB_ENDPOINT_XFER_CONTROL
) &&
1863 mEpTemp
= &_udc
->ep0in
;
1864 mReq
->req
.complete(&mEpTemp
->ep
, &mReq
->req
);
1865 spin_lock(mEp
->lock
);
1869 if (retval
== -EBUSY
)
1872 dbg_event(_usb_addr(mEp
), "DONE", retval
);
1878 * isr_tr_complete_handler: transaction complete interrupt handler
1879 * @udc: UDC descriptor
1881 * This function handles traffic events
1883 static void isr_tr_complete_handler(struct ci13xxx
*udc
)
1884 __releases(udc
->lock
)
1885 __acquires(udc
->lock
)
1897 for (i
= 0; i
< hw_ep_max
; i
++) {
1898 struct ci13xxx_ep
*mEp
= &udc
->ci13xxx_ep
[i
];
1899 int type
, num
, dir
, err
= -EINVAL
;
1900 struct usb_ctrlrequest req
;
1902 if (mEp
->desc
== NULL
)
1903 continue; /* not configured */
1905 if (hw_test_and_clear_complete(i
)) {
1906 err
= isr_tr_complete_low(mEp
);
1907 if (mEp
->type
== USB_ENDPOINT_XFER_CONTROL
) {
1908 if (err
> 0) /* needs status phase */
1909 err
= isr_setup_status_phase(udc
);
1911 dbg_event(_usb_addr(mEp
),
1913 spin_unlock(udc
->lock
);
1914 if (usb_ep_set_halt(&mEp
->ep
))
1915 err("error: ep_set_halt");
1916 spin_lock(udc
->lock
);
1921 if (mEp
->type
!= USB_ENDPOINT_XFER_CONTROL
||
1922 !hw_test_and_clear_setup_status(i
))
1926 warn("ctrl traffic received at endpoint");
1931 * Flush data and handshake transactions of previous
1934 _ep_nuke(&udc
->ep0out
);
1935 _ep_nuke(&udc
->ep0in
);
1937 /* read_setup_packet */
1939 hw_test_and_set_setup_guard();
1940 memcpy(&req
, &mEp
->qh
.ptr
->setup
, sizeof(req
));
1941 } while (!hw_test_and_clear_setup_guard());
1943 type
= req
.bRequestType
;
1945 udc
->ep0_dir
= (type
& USB_DIR_IN
) ? TX
: RX
;
1947 dbg_setup(_usb_addr(mEp
), &req
);
1949 switch (req
.bRequest
) {
1950 case USB_REQ_CLEAR_FEATURE
:
1951 if (type
== (USB_DIR_OUT
|USB_RECIP_ENDPOINT
) &&
1952 le16_to_cpu(req
.wValue
) ==
1953 USB_ENDPOINT_HALT
) {
1954 if (req
.wLength
!= 0)
1956 num
= le16_to_cpu(req
.wIndex
);
1957 dir
= num
& USB_ENDPOINT_DIR_MASK
;
1958 num
&= USB_ENDPOINT_NUMBER_MASK
;
1961 if (!udc
->ci13xxx_ep
[num
].wedge
) {
1962 spin_unlock(udc
->lock
);
1963 err
= usb_ep_clear_halt(
1964 &udc
->ci13xxx_ep
[num
].ep
);
1965 spin_lock(udc
->lock
);
1969 err
= isr_setup_status_phase(udc
);
1970 } else if (type
== (USB_DIR_OUT
|USB_RECIP_DEVICE
) &&
1971 le16_to_cpu(req
.wValue
) ==
1972 USB_DEVICE_REMOTE_WAKEUP
) {
1973 if (req
.wLength
!= 0)
1975 udc
->remote_wakeup
= 0;
1976 err
= isr_setup_status_phase(udc
);
1981 case USB_REQ_GET_STATUS
:
1982 if (type
!= (USB_DIR_IN
|USB_RECIP_DEVICE
) &&
1983 type
!= (USB_DIR_IN
|USB_RECIP_ENDPOINT
) &&
1984 type
!= (USB_DIR_IN
|USB_RECIP_INTERFACE
))
1986 if (le16_to_cpu(req
.wLength
) != 2 ||
1987 le16_to_cpu(req
.wValue
) != 0)
1989 err
= isr_get_status_response(udc
, &req
);
1991 case USB_REQ_SET_ADDRESS
:
1992 if (type
!= (USB_DIR_OUT
|USB_RECIP_DEVICE
))
1994 if (le16_to_cpu(req
.wLength
) != 0 ||
1995 le16_to_cpu(req
.wIndex
) != 0)
1997 err
= hw_usb_set_address((u8
)le16_to_cpu(req
.wValue
));
2000 err
= isr_setup_status_phase(udc
);
2002 case USB_REQ_SET_FEATURE
:
2003 if (type
== (USB_DIR_OUT
|USB_RECIP_ENDPOINT
) &&
2004 le16_to_cpu(req
.wValue
) ==
2005 USB_ENDPOINT_HALT
) {
2006 if (req
.wLength
!= 0)
2008 num
= le16_to_cpu(req
.wIndex
);
2009 dir
= num
& USB_ENDPOINT_DIR_MASK
;
2010 num
&= USB_ENDPOINT_NUMBER_MASK
;
2014 spin_unlock(udc
->lock
);
2015 err
= usb_ep_set_halt(&udc
->ci13xxx_ep
[num
].ep
);
2016 spin_lock(udc
->lock
);
2018 isr_setup_status_phase(udc
);
2019 } else if (type
== (USB_DIR_OUT
|USB_RECIP_DEVICE
)) {
2020 if (req
.wLength
!= 0)
2022 switch (le16_to_cpu(req
.wValue
)) {
2023 case USB_DEVICE_REMOTE_WAKEUP
:
2024 udc
->remote_wakeup
= 1;
2025 err
= isr_setup_status_phase(udc
);
2027 case USB_DEVICE_TEST_MODE
:
2028 tmode
= le16_to_cpu(req
.wIndex
) >> 8;
2035 udc
->test_mode
= tmode
;
2036 err
= isr_setup_status_phase(
2051 if (req
.wLength
== 0) /* no data phase */
2054 spin_unlock(udc
->lock
);
2055 err
= udc
->driver
->setup(&udc
->gadget
, &req
);
2056 spin_lock(udc
->lock
);
2061 dbg_event(_usb_addr(mEp
), "ERROR", err
);
2063 spin_unlock(udc
->lock
);
2064 if (usb_ep_set_halt(&mEp
->ep
))
2065 err("error: ep_set_halt");
2066 spin_lock(udc
->lock
);
2071 /******************************************************************************
2073 *****************************************************************************/
2075 * ep_enable: configure endpoint, making it usable
2077 * Check usb_ep_enable() at "usb_gadget.h" for details
2079 static int ep_enable(struct usb_ep
*ep
,
2080 const struct usb_endpoint_descriptor
*desc
)
2082 struct ci13xxx_ep
*mEp
= container_of(ep
, struct ci13xxx_ep
, ep
);
2084 unsigned long flags
;
2086 trace("%p, %p", ep
, desc
);
2088 if (ep
== NULL
|| desc
== NULL
)
2091 spin_lock_irqsave(mEp
->lock
, flags
);
2093 /* only internal SW should enable ctrl endpts */
2097 if (!list_empty(&mEp
->qh
.queue
))
2098 warn("enabling a non-empty endpoint!");
2100 mEp
->dir
= usb_endpoint_dir_in(desc
) ? TX
: RX
;
2101 mEp
->num
= usb_endpoint_num(desc
);
2102 mEp
->type
= usb_endpoint_type(desc
);
2104 mEp
->ep
.maxpacket
= __constant_le16_to_cpu(desc
->wMaxPacketSize
);
2106 dbg_event(_usb_addr(mEp
), "ENABLE", 0);
2108 mEp
->qh
.ptr
->cap
= 0;
2110 if (mEp
->type
== USB_ENDPOINT_XFER_CONTROL
)
2111 mEp
->qh
.ptr
->cap
|= QH_IOS
;
2112 else if (mEp
->type
== USB_ENDPOINT_XFER_ISOC
)
2113 mEp
->qh
.ptr
->cap
&= ~QH_MULT
;
2115 mEp
->qh
.ptr
->cap
&= ~QH_ZLT
;
2118 (mEp
->ep
.maxpacket
<< ffs_nr(QH_MAX_PKT
)) & QH_MAX_PKT
;
2119 mEp
->qh
.ptr
->td
.next
|= TD_TERMINATE
; /* needed? */
2122 * Enable endpoints in the HW other than ep0 as ep0
2126 retval
|= hw_ep_enable(mEp
->num
, mEp
->dir
, mEp
->type
);
2128 spin_unlock_irqrestore(mEp
->lock
, flags
);
2133 * ep_disable: endpoint is no longer usable
2135 * Check usb_ep_disable() at "usb_gadget.h" for details
2137 static int ep_disable(struct usb_ep
*ep
)
2139 struct ci13xxx_ep
*mEp
= container_of(ep
, struct ci13xxx_ep
, ep
);
2140 int direction
, retval
= 0;
2141 unsigned long flags
;
2147 else if (mEp
->desc
== NULL
)
2150 spin_lock_irqsave(mEp
->lock
, flags
);
2152 /* only internal SW should disable ctrl endpts */
2154 direction
= mEp
->dir
;
2156 dbg_event(_usb_addr(mEp
), "DISABLE", 0);
2158 retval
|= _ep_nuke(mEp
);
2159 retval
|= hw_ep_disable(mEp
->num
, mEp
->dir
);
2161 if (mEp
->type
== USB_ENDPOINT_XFER_CONTROL
)
2162 mEp
->dir
= (mEp
->dir
== TX
) ? RX
: TX
;
2164 } while (mEp
->dir
!= direction
);
2168 spin_unlock_irqrestore(mEp
->lock
, flags
);
2173 * ep_alloc_request: allocate a request object to use with this endpoint
2175 * Check usb_ep_alloc_request() at "usb_gadget.h" for details
2177 static struct usb_request
*ep_alloc_request(struct usb_ep
*ep
, gfp_t gfp_flags
)
2179 struct ci13xxx_ep
*mEp
= container_of(ep
, struct ci13xxx_ep
, ep
);
2180 struct ci13xxx_req
*mReq
= NULL
;
2182 trace("%p, %i", ep
, gfp_flags
);
2189 mReq
= kzalloc(sizeof(struct ci13xxx_req
), gfp_flags
);
2191 INIT_LIST_HEAD(&mReq
->queue
);
2193 mReq
->ptr
= dma_pool_alloc(mEp
->td_pool
, gfp_flags
,
2195 if (mReq
->ptr
== NULL
) {
2201 dbg_event(_usb_addr(mEp
), "ALLOC", mReq
== NULL
);
2203 return (mReq
== NULL
) ? NULL
: &mReq
->req
;
2207 * ep_free_request: frees a request object
2209 * Check usb_ep_free_request() at "usb_gadget.h" for details
2211 static void ep_free_request(struct usb_ep
*ep
, struct usb_request
*req
)
2213 struct ci13xxx_ep
*mEp
= container_of(ep
, struct ci13xxx_ep
, ep
);
2214 struct ci13xxx_req
*mReq
= container_of(req
, struct ci13xxx_req
, req
);
2215 unsigned long flags
;
2217 trace("%p, %p", ep
, req
);
2219 if (ep
== NULL
|| req
== NULL
) {
2222 } else if (!list_empty(&mReq
->queue
)) {
2227 spin_lock_irqsave(mEp
->lock
, flags
);
2230 dma_pool_free(mEp
->td_pool
, mReq
->ptr
, mReq
->dma
);
2233 dbg_event(_usb_addr(mEp
), "FREE", 0);
2235 spin_unlock_irqrestore(mEp
->lock
, flags
);
2239 * ep_queue: queues (submits) an I/O request to an endpoint
2241 * Check usb_ep_queue()* at usb_gadget.h" for details
2243 static int ep_queue(struct usb_ep
*ep
, struct usb_request
*req
,
2244 gfp_t __maybe_unused gfp_flags
)
2246 struct ci13xxx_ep
*mEp
= container_of(ep
, struct ci13xxx_ep
, ep
);
2247 struct ci13xxx_req
*mReq
= container_of(req
, struct ci13xxx_req
, req
);
2249 unsigned long flags
;
2251 trace("%p, %p, %X", ep
, req
, gfp_flags
);
2253 if (ep
== NULL
|| req
== NULL
|| mEp
->desc
== NULL
)
2256 spin_lock_irqsave(mEp
->lock
, flags
);
2258 if (mEp
->type
== USB_ENDPOINT_XFER_CONTROL
) {
2260 mEp
= (_udc
->ep0_dir
== RX
) ?
2261 &_udc
->ep0out
: &_udc
->ep0in
;
2262 if (!list_empty(&mEp
->qh
.queue
)) {
2264 retval
= -EOVERFLOW
;
2265 warn("endpoint ctrl %X nuked", _usb_addr(mEp
));
2269 /* first nuke then test link, e.g. previous status has not sent */
2270 if (!list_empty(&mReq
->queue
)) {
2272 err("request already in queue");
2276 if (req
->length
> (4 * CI13XXX_PAGE_SIZE
)) {
2277 req
->length
= (4 * CI13XXX_PAGE_SIZE
);
2279 warn("request length truncated");
2282 dbg_queue(_usb_addr(mEp
), req
, retval
);
2285 mReq
->req
.status
= -EINPROGRESS
;
2286 mReq
->req
.actual
= 0;
2288 retval
= _hardware_enqueue(mEp
, mReq
);
2290 if (retval
== -EALREADY
) {
2291 dbg_event(_usb_addr(mEp
), "QUEUE", retval
);
2295 list_add_tail(&mReq
->queue
, &mEp
->qh
.queue
);
2298 spin_unlock_irqrestore(mEp
->lock
, flags
);
2303 * ep_dequeue: dequeues (cancels, unlinks) an I/O request from an endpoint
2305 * Check usb_ep_dequeue() at "usb_gadget.h" for details
2307 static int ep_dequeue(struct usb_ep
*ep
, struct usb_request
*req
)
2309 struct ci13xxx_ep
*mEp
= container_of(ep
, struct ci13xxx_ep
, ep
);
2310 struct ci13xxx_req
*mReq
= container_of(req
, struct ci13xxx_req
, req
);
2311 unsigned long flags
;
2313 trace("%p, %p", ep
, req
);
2315 if (ep
== NULL
|| req
== NULL
|| mReq
->req
.status
!= -EALREADY
||
2316 mEp
->desc
== NULL
|| list_empty(&mReq
->queue
) ||
2317 list_empty(&mEp
->qh
.queue
))
2320 spin_lock_irqsave(mEp
->lock
, flags
);
2322 dbg_event(_usb_addr(mEp
), "DEQUEUE", 0);
2324 hw_ep_flush(mEp
->num
, mEp
->dir
);
2327 list_del_init(&mReq
->queue
);
2329 dma_unmap_single(mEp
->device
, mReq
->req
.dma
, mReq
->req
.length
,
2330 mEp
->dir
? DMA_TO_DEVICE
: DMA_FROM_DEVICE
);
2334 req
->status
= -ECONNRESET
;
2336 if (mReq
->req
.complete
!= NULL
) {
2337 spin_unlock(mEp
->lock
);
2338 mReq
->req
.complete(&mEp
->ep
, &mReq
->req
);
2339 spin_lock(mEp
->lock
);
2342 spin_unlock_irqrestore(mEp
->lock
, flags
);
2347 * ep_set_halt: sets the endpoint halt feature
2349 * Check usb_ep_set_halt() at "usb_gadget.h" for details
2351 static int ep_set_halt(struct usb_ep
*ep
, int value
)
2353 struct ci13xxx_ep
*mEp
= container_of(ep
, struct ci13xxx_ep
, ep
);
2354 int direction
, retval
= 0;
2355 unsigned long flags
;
2357 trace("%p, %i", ep
, value
);
2359 if (ep
== NULL
|| mEp
->desc
== NULL
)
2362 spin_lock_irqsave(mEp
->lock
, flags
);
2365 /* g_file_storage MS compliant but g_zero fails chapter 9 compliance */
2366 if (value
&& mEp
->type
== USB_ENDPOINT_XFER_BULK
&& mEp
->dir
== TX
&&
2367 !list_empty(&mEp
->qh
.queue
)) {
2368 spin_unlock_irqrestore(mEp
->lock
, flags
);
2373 direction
= mEp
->dir
;
2375 dbg_event(_usb_addr(mEp
), "HALT", value
);
2376 retval
|= hw_ep_set_halt(mEp
->num
, mEp
->dir
, value
);
2381 if (mEp
->type
== USB_ENDPOINT_XFER_CONTROL
)
2382 mEp
->dir
= (mEp
->dir
== TX
) ? RX
: TX
;
2384 } while (mEp
->dir
!= direction
);
2386 spin_unlock_irqrestore(mEp
->lock
, flags
);
2391 * ep_set_wedge: sets the halt feature and ignores clear requests
2393 * Check usb_ep_set_wedge() at "usb_gadget.h" for details
2395 static int ep_set_wedge(struct usb_ep
*ep
)
2397 struct ci13xxx_ep
*mEp
= container_of(ep
, struct ci13xxx_ep
, ep
);
2398 unsigned long flags
;
2402 if (ep
== NULL
|| mEp
->desc
== NULL
)
2405 spin_lock_irqsave(mEp
->lock
, flags
);
2407 dbg_event(_usb_addr(mEp
), "WEDGE", 0);
2410 spin_unlock_irqrestore(mEp
->lock
, flags
);
2412 return usb_ep_set_halt(ep
);
2416 * ep_fifo_flush: flushes contents of a fifo
2418 * Check usb_ep_fifo_flush() at "usb_gadget.h" for details
2420 static void ep_fifo_flush(struct usb_ep
*ep
)
2422 struct ci13xxx_ep
*mEp
= container_of(ep
, struct ci13xxx_ep
, ep
);
2423 unsigned long flags
;
2428 err("%02X: -EINVAL", _usb_addr(mEp
));
2432 spin_lock_irqsave(mEp
->lock
, flags
);
2434 dbg_event(_usb_addr(mEp
), "FFLUSH", 0);
2435 hw_ep_flush(mEp
->num
, mEp
->dir
);
2437 spin_unlock_irqrestore(mEp
->lock
, flags
);
2441 * Endpoint-specific part of the API to the USB controller hardware
2442 * Check "usb_gadget.h" for details
2444 static const struct usb_ep_ops usb_ep_ops
= {
2445 .enable
= ep_enable
,
2446 .disable
= ep_disable
,
2447 .alloc_request
= ep_alloc_request
,
2448 .free_request
= ep_free_request
,
2450 .dequeue
= ep_dequeue
,
2451 .set_halt
= ep_set_halt
,
2452 .set_wedge
= ep_set_wedge
,
2453 .fifo_flush
= ep_fifo_flush
,
2456 /******************************************************************************
2458 *****************************************************************************/
2459 static int ci13xxx_vbus_session(struct usb_gadget
*_gadget
, int is_active
)
2461 struct ci13xxx
*udc
= container_of(_gadget
, struct ci13xxx
, gadget
);
2462 unsigned long flags
;
2463 int gadget_ready
= 0;
2465 if (!(udc
->udc_driver
->flags
& CI13XXX_PULLUP_ON_VBUS
))
2468 spin_lock_irqsave(udc
->lock
, flags
);
2469 udc
->vbus_active
= is_active
;
2472 spin_unlock_irqrestore(udc
->lock
, flags
);
2476 pm_runtime_get_sync(&_gadget
->dev
);
2477 hw_device_reset(udc
);
2478 hw_device_state(udc
->ep0out
.qh
.dma
);
2481 if (udc
->udc_driver
->notify_event
)
2482 udc
->udc_driver
->notify_event(udc
,
2483 CI13XXX_CONTROLLER_STOPPED_EVENT
);
2484 _gadget_stop_activity(&udc
->gadget
);
2485 pm_runtime_put_sync(&_gadget
->dev
);
2492 static int ci13xxx_wakeup(struct usb_gadget
*_gadget
)
2494 struct ci13xxx
*udc
= container_of(_gadget
, struct ci13xxx
, gadget
);
2495 unsigned long flags
;
2500 spin_lock_irqsave(udc
->lock
, flags
);
2501 if (!udc
->remote_wakeup
) {
2503 dbg_trace("remote wakeup feature is not enabled\n");
2506 if (!hw_cread(CAP_PORTSC
, PORTSC_SUSP
)) {
2508 dbg_trace("port is not suspended\n");
2511 hw_cwrite(CAP_PORTSC
, PORTSC_FPR
, PORTSC_FPR
);
2513 spin_unlock_irqrestore(udc
->lock
, flags
);
2517 static int ci13xxx_vbus_draw(struct usb_gadget
*_gadget
, unsigned mA
)
2519 struct ci13xxx
*udc
= container_of(_gadget
, struct ci13xxx
, gadget
);
2521 if (udc
->transceiver
)
2522 return otg_set_power(udc
->transceiver
, mA
);
2526 static int ci13xxx_start(struct usb_gadget_driver
*driver
,
2527 int (*bind
)(struct usb_gadget
*));
2528 static int ci13xxx_stop(struct usb_gadget_driver
*driver
);
2530 * Device operations part of the API to the USB controller hardware,
2531 * which don't involve endpoints (or i/o)
2532 * Check "usb_gadget.h" for details
2534 static const struct usb_gadget_ops usb_gadget_ops
= {
2535 .vbus_session
= ci13xxx_vbus_session
,
2536 .wakeup
= ci13xxx_wakeup
,
2537 .vbus_draw
= ci13xxx_vbus_draw
,
2538 .start
= ci13xxx_start
,
2539 .stop
= ci13xxx_stop
,
2543 * ci13xxx_start: register a gadget driver
2544 * @driver: the driver being registered
2545 * @bind: the driver's bind callback
2547 * Check ci13xxx_start() at <linux/usb/gadget.h> for details.
2548 * Interrupts are enabled here.
2550 static int ci13xxx_start(struct usb_gadget_driver
*driver
,
2551 int (*bind
)(struct usb_gadget
*))
2553 struct ci13xxx
*udc
= _udc
;
2554 unsigned long flags
;
2556 int retval
= -ENOMEM
;
2558 trace("%p", driver
);
2560 if (driver
== NULL
||
2562 driver
->setup
== NULL
||
2563 driver
->disconnect
== NULL
||
2564 driver
->suspend
== NULL
||
2565 driver
->resume
== NULL
)
2567 else if (udc
== NULL
)
2569 else if (udc
->driver
!= NULL
)
2572 /* alloc resources */
2573 udc
->qh_pool
= dma_pool_create("ci13xxx_qh", &udc
->gadget
.dev
,
2574 sizeof(struct ci13xxx_qh
),
2575 64, CI13XXX_PAGE_SIZE
);
2576 if (udc
->qh_pool
== NULL
)
2579 udc
->td_pool
= dma_pool_create("ci13xxx_td", &udc
->gadget
.dev
,
2580 sizeof(struct ci13xxx_td
),
2581 64, CI13XXX_PAGE_SIZE
);
2582 if (udc
->td_pool
== NULL
) {
2583 dma_pool_destroy(udc
->qh_pool
);
2584 udc
->qh_pool
= NULL
;
2588 spin_lock_irqsave(udc
->lock
, flags
);
2590 info("hw_ep_max = %d", hw_ep_max
);
2592 udc
->gadget
.dev
.driver
= NULL
;
2595 for (i
= 0; i
< hw_ep_max
/2; i
++) {
2596 for (j
= RX
; j
<= TX
; j
++) {
2597 int k
= i
+ j
* hw_ep_max
/2;
2598 struct ci13xxx_ep
*mEp
= &udc
->ci13xxx_ep
[k
];
2600 scnprintf(mEp
->name
, sizeof(mEp
->name
), "ep%i%s", i
,
2601 (j
== TX
) ? "in" : "out");
2603 mEp
->lock
= udc
->lock
;
2604 mEp
->device
= &udc
->gadget
.dev
;
2605 mEp
->td_pool
= udc
->td_pool
;
2607 mEp
->ep
.name
= mEp
->name
;
2608 mEp
->ep
.ops
= &usb_ep_ops
;
2609 mEp
->ep
.maxpacket
= CTRL_PAYLOAD_MAX
;
2611 INIT_LIST_HEAD(&mEp
->qh
.queue
);
2612 spin_unlock_irqrestore(udc
->lock
, flags
);
2613 mEp
->qh
.ptr
= dma_pool_alloc(udc
->qh_pool
, GFP_KERNEL
,
2615 spin_lock_irqsave(udc
->lock
, flags
);
2616 if (mEp
->qh
.ptr
== NULL
)
2619 memset(mEp
->qh
.ptr
, 0, sizeof(*mEp
->qh
.ptr
));
2621 /* skip ep0 out and in endpoints */
2625 list_add_tail(&mEp
->ep
.ep_list
, &udc
->gadget
.ep_list
);
2630 spin_unlock_irqrestore(udc
->lock
, flags
);
2631 udc
->ep0out
.ep
.desc
= &ctrl_endpt_out_desc
;
2632 retval
= usb_ep_enable(&udc
->ep0out
.ep
);
2636 udc
->ep0in
.ep
.desc
= &ctrl_endpt_in_desc
;
2637 retval
= usb_ep_enable(&udc
->ep0in
.ep
);
2640 spin_lock_irqsave(udc
->lock
, flags
);
2642 udc
->gadget
.ep0
= &udc
->ep0in
.ep
;
2644 driver
->driver
.bus
= NULL
;
2645 udc
->gadget
.dev
.driver
= &driver
->driver
;
2647 spin_unlock_irqrestore(udc
->lock
, flags
);
2648 retval
= bind(&udc
->gadget
); /* MAY SLEEP */
2649 spin_lock_irqsave(udc
->lock
, flags
);
2652 udc
->gadget
.dev
.driver
= NULL
;
2656 udc
->driver
= driver
;
2657 pm_runtime_get_sync(&udc
->gadget
.dev
);
2658 if (udc
->udc_driver
->flags
& CI13XXX_PULLUP_ON_VBUS
) {
2659 if (udc
->vbus_active
) {
2660 if (udc
->udc_driver
->flags
& CI13XXX_REGS_SHARED
)
2661 hw_device_reset(udc
);
2663 pm_runtime_put_sync(&udc
->gadget
.dev
);
2668 retval
= hw_device_state(udc
->ep0out
.qh
.dma
);
2670 pm_runtime_put_sync(&udc
->gadget
.dev
);
2673 spin_unlock_irqrestore(udc
->lock
, flags
);
2678 * ci13xxx_stop: unregister a gadget driver
2680 * Check usb_gadget_unregister_driver() at "usb_gadget.h" for details
2682 static int ci13xxx_stop(struct usb_gadget_driver
*driver
)
2684 struct ci13xxx
*udc
= _udc
;
2685 unsigned long i
, flags
;
2687 trace("%p", driver
);
2689 if (driver
== NULL
||
2690 driver
->unbind
== NULL
||
2691 driver
->setup
== NULL
||
2692 driver
->disconnect
== NULL
||
2693 driver
->suspend
== NULL
||
2694 driver
->resume
== NULL
||
2695 driver
!= udc
->driver
)
2698 spin_lock_irqsave(udc
->lock
, flags
);
2700 if (!(udc
->udc_driver
->flags
& CI13XXX_PULLUP_ON_VBUS
) ||
2703 if (udc
->udc_driver
->notify_event
)
2704 udc
->udc_driver
->notify_event(udc
,
2705 CI13XXX_CONTROLLER_STOPPED_EVENT
);
2706 _gadget_stop_activity(&udc
->gadget
);
2707 pm_runtime_put(&udc
->gadget
.dev
);
2711 spin_unlock_irqrestore(udc
->lock
, flags
);
2712 driver
->unbind(&udc
->gadget
); /* MAY SLEEP */
2713 spin_lock_irqsave(udc
->lock
, flags
);
2715 udc
->gadget
.dev
.driver
= NULL
;
2717 /* free resources */
2718 for (i
= 0; i
< hw_ep_max
; i
++) {
2719 struct ci13xxx_ep
*mEp
= &udc
->ci13xxx_ep
[i
];
2721 if (!list_empty(&mEp
->ep
.ep_list
))
2722 list_del_init(&mEp
->ep
.ep_list
);
2724 if (mEp
->qh
.ptr
!= NULL
)
2725 dma_pool_free(udc
->qh_pool
, mEp
->qh
.ptr
, mEp
->qh
.dma
);
2728 udc
->gadget
.ep0
= NULL
;
2731 spin_unlock_irqrestore(udc
->lock
, flags
);
2733 if (udc
->td_pool
!= NULL
) {
2734 dma_pool_destroy(udc
->td_pool
);
2735 udc
->td_pool
= NULL
;
2737 if (udc
->qh_pool
!= NULL
) {
2738 dma_pool_destroy(udc
->qh_pool
);
2739 udc
->qh_pool
= NULL
;
2745 /******************************************************************************
2747 *****************************************************************************/
2749 * udc_irq: global interrupt handler
2751 * This function returns IRQ_HANDLED if the IRQ has been handled
2752 * It locks access to registers
2754 static irqreturn_t
udc_irq(void)
2756 struct ci13xxx
*udc
= _udc
;
2767 spin_lock(udc
->lock
);
2769 if (udc
->udc_driver
->flags
& CI13XXX_REGS_SHARED
) {
2770 if (hw_cread(CAP_USBMODE
, USBMODE_CM
) !=
2771 USBMODE_CM_DEVICE
) {
2772 spin_unlock(udc
->lock
);
2776 intr
= hw_test_and_clear_intr_active();
2778 isr_statistics
.hndl
.buf
[isr_statistics
.hndl
.idx
++] = intr
;
2779 isr_statistics
.hndl
.idx
&= ISR_MASK
;
2780 isr_statistics
.hndl
.cnt
++;
2782 /* order defines priority - do NOT change it */
2783 if (USBi_URI
& intr
) {
2784 isr_statistics
.uri
++;
2785 isr_reset_handler(udc
);
2787 if (USBi_PCI
& intr
) {
2788 isr_statistics
.pci
++;
2789 udc
->gadget
.speed
= hw_port_is_high_speed() ?
2790 USB_SPEED_HIGH
: USB_SPEED_FULL
;
2791 if (udc
->suspended
) {
2792 spin_unlock(udc
->lock
);
2793 udc
->driver
->resume(&udc
->gadget
);
2794 spin_lock(udc
->lock
);
2798 if (USBi_UEI
& intr
)
2799 isr_statistics
.uei
++;
2800 if (USBi_UI
& intr
) {
2801 isr_statistics
.ui
++;
2802 isr_tr_complete_handler(udc
);
2804 if (USBi_SLI
& intr
) {
2805 if (udc
->gadget
.speed
!= USB_SPEED_UNKNOWN
) {
2807 spin_unlock(udc
->lock
);
2808 udc
->driver
->suspend(&udc
->gadget
);
2809 spin_lock(udc
->lock
);
2811 isr_statistics
.sli
++;
2813 retval
= IRQ_HANDLED
;
2815 isr_statistics
.none
++;
2818 spin_unlock(udc
->lock
);
2824 * udc_release: driver release function
2827 * Currently does nothing
2829 static void udc_release(struct device
*dev
)
2838 * udc_probe: parent probe must call this to initialize UDC
2839 * @dev: parent device
2840 * @regs: registers base address
2841 * @name: driver name
2843 * This function returns an error code
2844 * No interrupts active, the IRQ has not been requested yet
2845 * Kernel assumes 32-bit DMA operations by default, no need to dma_set_mask
2847 static int udc_probe(struct ci13xxx_udc_driver
*driver
, struct device
*dev
,
2850 struct ci13xxx
*udc
;
2853 trace("%p, %p, %p", dev
, regs
, name
);
2855 if (dev
== NULL
|| regs
== NULL
|| driver
== NULL
||
2856 driver
->name
== NULL
)
2859 udc
= kzalloc(sizeof(struct ci13xxx
), GFP_KERNEL
);
2863 udc
->lock
= &udc_lock
;
2865 udc
->udc_driver
= driver
;
2867 udc
->gadget
.ops
= &usb_gadget_ops
;
2868 udc
->gadget
.speed
= USB_SPEED_UNKNOWN
;
2869 udc
->gadget
.is_dualspeed
= 1;
2870 udc
->gadget
.is_otg
= 0;
2871 udc
->gadget
.name
= driver
->name
;
2873 INIT_LIST_HEAD(&udc
->gadget
.ep_list
);
2874 udc
->gadget
.ep0
= NULL
;
2876 dev_set_name(&udc
->gadget
.dev
, "gadget");
2877 udc
->gadget
.dev
.dma_mask
= dev
->dma_mask
;
2878 udc
->gadget
.dev
.coherent_dma_mask
= dev
->coherent_dma_mask
;
2879 udc
->gadget
.dev
.parent
= dev
;
2880 udc
->gadget
.dev
.release
= udc_release
;
2882 retval
= hw_device_init(regs
);
2886 udc
->transceiver
= otg_get_transceiver();
2888 if (udc
->udc_driver
->flags
& CI13XXX_REQUIRE_TRANSCEIVER
) {
2889 if (udc
->transceiver
== NULL
) {
2895 if (!(udc
->udc_driver
->flags
& CI13XXX_REGS_SHARED
)) {
2896 retval
= hw_device_reset(udc
);
2898 goto put_transceiver
;
2901 retval
= device_register(&udc
->gadget
.dev
);
2903 put_device(&udc
->gadget
.dev
);
2904 goto put_transceiver
;
2907 #ifdef CONFIG_USB_GADGET_DEBUG_FILES
2908 retval
= dbg_create_files(&udc
->gadget
.dev
);
2913 if (udc
->transceiver
) {
2914 retval
= otg_set_peripheral(udc
->transceiver
, &udc
->gadget
);
2919 retval
= usb_add_gadget_udc(dev
, &udc
->gadget
);
2923 pm_runtime_no_callbacks(&udc
->gadget
.dev
);
2924 pm_runtime_enable(&udc
->gadget
.dev
);
2930 if (udc
->transceiver
) {
2931 otg_set_peripheral(udc
->transceiver
, &udc
->gadget
);
2932 otg_put_transceiver(udc
->transceiver
);
2935 err("error = %i", retval
);
2937 #ifdef CONFIG_USB_GADGET_DEBUG_FILES
2938 dbg_remove_files(&udc
->gadget
.dev
);
2941 device_unregister(&udc
->gadget
.dev
);
2943 if (udc
->transceiver
)
2944 otg_put_transceiver(udc
->transceiver
);
2952 * udc_remove: parent remove must call this to remove UDC
2954 * No interrupts active, the IRQ has been released
2956 static void udc_remove(void)
2958 struct ci13xxx
*udc
= _udc
;
2964 usb_del_gadget_udc(&udc
->gadget
);
2966 if (udc
->transceiver
) {
2967 otg_set_peripheral(udc
->transceiver
, &udc
->gadget
);
2968 otg_put_transceiver(udc
->transceiver
);
2970 #ifdef CONFIG_USB_GADGET_DEBUG_FILES
2971 dbg_remove_files(&udc
->gadget
.dev
);
2973 device_unregister(&udc
->gadget
.dev
);