include/media/upd64083.h

   1 /*
   2  * upd6408x - NEC Electronics 3-Dimensional Y/C separation input defines
   3  *
   4  * 2006 by Hans Verkuil (hverkuil@xs4all.nl)
   5  *
   6  * This program is free software; you can redistribute it and/or
   7  * modify it under the terms of the GNU General Public License
   8  * as published by the Free Software Foundation; either version 2
   9  * of the License, or (at your option) any later version.
  10  *
  11  * This program is distributed in the hope that it will be useful,
  12  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  13  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  14  * GNU General Public License for more details.
  15  *
  16  * You should have received a copy of the GNU General Public License
  17  * along with this program; if not, write to the Free Software
  18  * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
  19  */
  20
  21 #ifndef _UPD64083_H_
  22 #define _UPD64083_H_
  23
  24 /* There are two bits of information that the driver needs in order
  25    to select the correct routing: the operating mode and the selection
  26    of the Y input (external or internal).
  27
  28    The first two operating modes expect a composite signal on the Y input,
  29    the second two operating modes use both the Y and C inputs.
  30
  31    Normally YCS_MODE is used for tuner and composite inputs, and the
  32    YCNR mode is used for S-Video inputs.
  33
  34    The external Y-ADC is selected when the composite input comes from a
  35    upd64031a ghost reduction device. If this device is not present, or
  36    the input is a S-Video signal, then the internal Y-ADC input should
  37    be used. */
  38
  39 /* Operating modes: */
  40
  41 /* YCS mode: Y/C separation (burst locked clocking) */
  42 #define UPD64083_YCS_MODE      0
  43 /* YCS+ mode: 2D Y/C separation and YCNR (burst locked clocking) */
  44 #define UPD64083_YCS_PLUS_MODE 1
  45
  46 /* Note: the following two modes cannot be used in combination with the
  47    external Y-ADC. */
  48 /* MNNR mode: frame comb type YNR+C delay (line locked clocking) */
  49 #define UPD64083_MNNR_MODE     2
  50 /* YCNR mode: frame recursive YCNR (burst locked clocking) */
  51 #define UPD64083_YCNR_MODE     3
  52
  53 /* Select external Y-ADC: this should be set if this device is used in
  54    combination with the upd64031a ghost reduction device.
  55    Otherwise leave at 0 (use internal Y-ADC). */
  56 #define UPD64083_EXT_Y_ADC     (1 << 2)
  57
  58 #endif