?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
Linux 2.6.13-rc4
[linux-2.6/next.git] / arch / arm / mach-sa1100 / h3600.c
blobe7aa2681ca6419a13255939bfa52beb3a65eaf72
1 /*
2 * Hardware definitions for Compaq iPAQ H3xxx Handheld Computers
3 *
4 * Copyright 2000,1 Compaq Computer Corporation.
5 *
6 * Use consistent with the GNU GPL is permitted,
7 * provided that this copyright notice is
8 * preserved in its entirety in all copies and derived works.
9 *
10 * COMPAQ COMPUTER CORPORATION MAKES NO WARRANTIES, EXPRESSED OR IMPLIED,
11 * AS TO THE USEFULNESS OR CORRECTNESS OF THIS CODE OR ITS
12 * FITNESS FOR ANY PARTICULAR PURPOSE.
13 *
14 * Author: Jamey Hicks.
15 *
16 * History:
17 *
18 * 2001-10-?? Andrew Christian Added support for iPAQ H3800
19 * and abstracted EGPIO interface.
20 *
21 */
22 #include <linux/config.h>
23 #include <linux/module.h>
24 #include <linux/init.h>
25 #include <linux/kernel.h>
26 #include <linux/tty.h>
27 #include <linux/pm.h>
28 #include <linux/device.h>
29 #include <linux/mtd/mtd.h>
30 #include <linux/mtd/partitions.h>
31 #include <linux/serial_core.h>
32
33 #include <asm/irq.h>
34 #include <asm/hardware.h>
35 #include <asm/mach-types.h>
36 #include <asm/setup.h>
37
38 #include <asm/mach/irq.h>
39 #include <asm/mach/arch.h>
40 #include <asm/mach/flash.h>
41 #include <asm/mach/irda.h>
42 #include <asm/mach/map.h>
43 #include <asm/mach/serial_sa1100.h>
44
45 #include <asm/arch/h3600.h>
46
47 #if defined (CONFIG_SA1100_H3600) || defined (CONFIG_SA1100_H3100)
48 #include <asm/arch/h3600_gpio.h>
49 #endif
50
51 #ifdef CONFIG_SA1100_H3800
52 #include <asm/arch/h3600_asic.h>
53 #endif
54
55 #include "generic.h"
56
57 struct ipaq_model_ops ipaq_model_ops;
58 EXPORT_SYMBOL(ipaq_model_ops);
59
60 static struct mtd_partition h3xxx_partitions[] = {
61 {
62 .name = "H3XXX boot firmware",
63 .size = 0x00040000,
64 .offset = 0,
65 .mask_flags = MTD_WRITEABLE, /* force read-only */
66 }, {
67 #ifdef CONFIG_MTD_2PARTS_IPAQ
68 .name = "H3XXX root jffs2",
69 .size = MTDPART_SIZ_FULL,
70 .offset = 0x00040000,
71 #else
72 .name = "H3XXX kernel",
73 .size = 0x00080000,
74 .offset = 0x00040000,
75 }, {
76 .name = "H3XXX params",
77 .size = 0x00040000,
78 .offset = 0x000C0000,
79 }, {
80 #ifdef CONFIG_JFFS2_FS
81 .name = "H3XXX root jffs2",
82 .size = MTDPART_SIZ_FULL,
83 .offset = 0x00100000,
84 #else
85 .name = "H3XXX initrd",
86 .size = 0x00100000,
87 .offset = 0x00100000,
88 }, {
89 .name = "H3XXX root cramfs",
90 .size = 0x00300000,
91 .offset = 0x00200000,
92 }, {
93 .name = "H3XXX usr cramfs",
94 .size = 0x00800000,
95 .offset = 0x00500000,
96 }, {
97 .name = "H3XXX usr local",
98 .size = MTDPART_SIZ_FULL,
99 .offset = 0x00d00000,
100 #endif
101 #endif
102 }
103 };
104
105 static void h3xxx_set_vpp(int vpp)
106 {
107 assign_h3600_egpio(IPAQ_EGPIO_VPP_ON, vpp);
108 }
109
110 static struct flash_platform_data h3xxx_flash_data = {
111 .map_name = "cfi_probe",
112 .set_vpp = h3xxx_set_vpp,
113 .parts = h3xxx_partitions,
114 .nr_parts = ARRAY_SIZE(h3xxx_partitions),
115 };
116
117 static struct resource h3xxx_flash_resource = {
118 .start = SA1100_CS0_PHYS,
119 .end = SA1100_CS0_PHYS + SZ_32M - 1,
120 .flags = IORESOURCE_MEM,
121 };
122
123 /*
124 * This turns the IRDA power on or off on the Compaq H3600
125 */
126 static int h3600_irda_set_power(struct device *dev, unsigned int state)
127 {
128 assign_h3600_egpio( IPAQ_EGPIO_IR_ON, state );
129
130 return 0;
131 }
132
133 static void h3600_irda_set_speed(struct device *dev, unsigned int speed)
134 {
135 if (speed < 4000000) {
136 clr_h3600_egpio(IPAQ_EGPIO_IR_FSEL);
137 } else {
138 set_h3600_egpio(IPAQ_EGPIO_IR_FSEL);
139 }
140 }
141
142 static struct irda_platform_data h3600_irda_data = {
143 .set_power = h3600_irda_set_power,
144 .set_speed = h3600_irda_set_speed,
145 };
146
147 static void h3xxx_mach_init(void)
148 {
149 sa11x0_set_flash_data(&h3xxx_flash_data, &h3xxx_flash_resource, 1);
150 sa11x0_set_irda_data(&h3600_irda_data);
151 }
152
153 /*
154 * low-level UART features
155 */
156
157 static void h3600_uart_set_mctrl(struct uart_port *port, u_int mctrl)
158 {
159 if (port->mapbase == _Ser3UTCR0) {
160 if (mctrl & TIOCM_RTS)
161 GPCR = GPIO_H3600_COM_RTS;
162 else
163 GPSR = GPIO_H3600_COM_RTS;
164 }
165 }
166
167 static u_int h3600_uart_get_mctrl(struct uart_port *port)
168 {
169 u_int ret = TIOCM_CD | TIOCM_CTS | TIOCM_DSR;
170
171 if (port->mapbase == _Ser3UTCR0) {
172 int gplr = GPLR;
173 /* DCD and CTS bits are inverted in GPLR by RS232 transceiver */
174 if (gplr & GPIO_H3600_COM_DCD)
175 ret &= ~TIOCM_CD;
176 if (gplr & GPIO_H3600_COM_CTS)
177 ret &= ~TIOCM_CTS;
178 }
179
180 return ret;
181 }
182
183 static void h3600_uart_pm(struct uart_port *port, u_int state, u_int oldstate)
184 {
185 if (port->mapbase == _Ser2UTCR0) { /* TODO: REMOVE THIS */
186 assign_h3600_egpio(IPAQ_EGPIO_IR_ON, !state);
187 } else if (port->mapbase == _Ser3UTCR0) {
188 assign_h3600_egpio(IPAQ_EGPIO_RS232_ON, !state);
189 }
190 }
191
192 /*
193 * Enable/Disable wake up events for this serial port.
194 * Obviously, we only support this on the normal COM port.
195 */
196 static int h3600_uart_set_wake(struct uart_port *port, u_int enable)
197 {
198 int err = -EINVAL;
199
200 if (port->mapbase == _Ser3UTCR0) {
201 if (enable)
202 PWER |= PWER_GPIO23 | PWER_GPIO25; /* DCD and CTS */
203 else
204 PWER &= ~(PWER_GPIO23 | PWER_GPIO25); /* DCD and CTS */
205 err = 0;
206 }
207 return err;
208 }
209
210 static struct sa1100_port_fns h3600_port_fns __initdata = {
211 .set_mctrl = h3600_uart_set_mctrl,
212 .get_mctrl = h3600_uart_get_mctrl,
213 .pm = h3600_uart_pm,
214 .set_wake = h3600_uart_set_wake,
215 };
216
217 /*
218 * helper for sa1100fb
219 */
220 static void h3xxx_lcd_power(int enable)
221 {
222 assign_h3600_egpio(IPAQ_EGPIO_LCD_POWER, enable);
223 }
224
225 static struct map_desc h3600_io_desc[] __initdata = {
226 /* virtual physical length type */
227 { H3600_BANK_2_VIRT, SA1100_CS2_PHYS, 0x02800000, MT_DEVICE }, /* static memory bank 2 CS#2 */
228 { H3600_BANK_4_VIRT, SA1100_CS4_PHYS, 0x00800000, MT_DEVICE }, /* static memory bank 4 CS#4 */
229 { H3600_EGPIO_VIRT, H3600_EGPIO_PHYS, 0x01000000, MT_DEVICE }, /* EGPIO 0 CS#5 */
230 };
231
232 /*
233 * Common map_io initialization
234 */
235
236 static void __init h3xxx_map_io(void)
237 {
238 sa1100_map_io();
239 iotable_init(h3600_io_desc, ARRAY_SIZE(h3600_io_desc));
240
241 sa1100_register_uart_fns(&h3600_port_fns);
242 sa1100_register_uart(0, 3); /* Common serial port */
243 // sa1100_register_uart(1, 1); /* Microcontroller on 3100/3600 */
244
245 /* Ensure those pins are outputs and driving low */
246 PPDR |= PPC_TXD4 | PPC_SCLK | PPC_SFRM;
247 PPSR &= ~(PPC_TXD4 | PPC_SCLK | PPC_SFRM);
248
249 /* Configure suspend conditions */
250 PGSR = 0;
251 PWER = PWER_GPIO0 | PWER_RTC;
252 PCFR = PCFR_OPDE;
253 PSDR = 0;
254
255 sa1100fb_lcd_power = h3xxx_lcd_power;
256 }
257
258 static __inline__ void do_blank(int setp)
259 {
260 if (ipaq_model_ops.blank_callback)
261 ipaq_model_ops.blank_callback(1-setp);
262 }
263
264 /************************* H3100 *************************/
265
266 #ifdef CONFIG_SA1100_H3100
267
268 #define H3100_EGPIO (*(volatile unsigned int *)H3600_EGPIO_VIRT)
269 static unsigned int h3100_egpio = 0;
270
271 static void h3100_control_egpio(enum ipaq_egpio_type x, int setp)
272 {
273 unsigned int egpio = 0;
274 long gpio = 0;
275 unsigned long flags;
276
277 switch (x) {
278 case IPAQ_EGPIO_LCD_POWER:
279 egpio |= EGPIO_H3600_LCD_ON;
280 gpio |= GPIO_H3100_LCD_3V_ON;
281 do_blank(setp);
282 break;
283 case IPAQ_EGPIO_LCD_ENABLE:
284 break;
285 case IPAQ_EGPIO_CODEC_NRESET:
286 egpio |= EGPIO_H3600_CODEC_NRESET;
287 break;
288 case IPAQ_EGPIO_AUDIO_ON:
289 gpio |= GPIO_H3100_AUD_PWR_ON
290 | GPIO_H3100_AUD_ON;
291 break;
292 case IPAQ_EGPIO_QMUTE:
293 gpio |= GPIO_H3100_QMUTE;
294 break;
295 case IPAQ_EGPIO_OPT_NVRAM_ON:
296 egpio |= EGPIO_H3600_OPT_NVRAM_ON;
297 break;
298 case IPAQ_EGPIO_OPT_ON:
299 egpio |= EGPIO_H3600_OPT_ON;
300 break;
301 case IPAQ_EGPIO_CARD_RESET:
302 egpio |= EGPIO_H3600_CARD_RESET;
303 break;
304 case IPAQ_EGPIO_OPT_RESET:
305 egpio |= EGPIO_H3600_OPT_RESET;
306 break;
307 case IPAQ_EGPIO_IR_ON:
308 gpio |= GPIO_H3100_IR_ON;
309 break;
310 case IPAQ_EGPIO_IR_FSEL:
311 gpio |= GPIO_H3100_IR_FSEL;
312 break;
313 case IPAQ_EGPIO_RS232_ON:
314 egpio |= EGPIO_H3600_RS232_ON;
315 break;
316 case IPAQ_EGPIO_VPP_ON:
317 egpio |= EGPIO_H3600_VPP_ON;
318 break;
319 }
320
321 if (egpio || gpio) {
322 local_irq_save(flags);
323 if (setp) {
324 h3100_egpio |= egpio;
325 GPSR = gpio;
326 } else {
327 h3100_egpio &= ~egpio;
328 GPCR = gpio;
329 }
330 H3100_EGPIO = h3100_egpio;
331 local_irq_restore(flags);
332 }
333 }
334
335 static unsigned long h3100_read_egpio(void)
336 {
337 return h3100_egpio;
338 }
339
340 static int h3100_pm_callback(int req)
341 {
342 if (ipaq_model_ops.pm_callback_aux)
343 return ipaq_model_ops.pm_callback_aux(req);
344 return 0;
345 }
346
347 static struct ipaq_model_ops h3100_model_ops __initdata = {
348 .generic_name = "3100",
349 .control = h3100_control_egpio,
350 .read = h3100_read_egpio,
351 .pm_callback = h3100_pm_callback
352 };
353
354 #define H3100_DIRECT_EGPIO (GPIO_H3100_BT_ON \
355 | GPIO_H3100_GPIO3 \
356 | GPIO_H3100_QMUTE \
357 | GPIO_H3100_LCD_3V_ON \
358 | GPIO_H3100_AUD_ON \
359 | GPIO_H3100_AUD_PWR_ON \
360 | GPIO_H3100_IR_ON \
361 | GPIO_H3100_IR_FSEL)
362
363 static void __init h3100_map_io(void)
364 {
365 h3xxx_map_io();
366
367 /* Initialize h3100-specific values here */
368 GPCR = 0x0fffffff; /* All outputs are set low by default */
369 GPDR = GPIO_H3600_COM_RTS | GPIO_H3600_L3_CLOCK |
370 GPIO_H3600_L3_MODE | GPIO_H3600_L3_DATA |
371 GPIO_H3600_CLK_SET1 | GPIO_H3600_CLK_SET0 |
372 H3100_DIRECT_EGPIO;
373
374 /* Older bootldrs put GPIO2-9 in alternate mode on the
375 assumption that they are used for video */
376 GAFR &= ~H3100_DIRECT_EGPIO;
377
378 H3100_EGPIO = h3100_egpio;
379 ipaq_model_ops = h3100_model_ops;
380 }
381
382 MACHINE_START(H3100, "Compaq iPAQ H3100")
383 .phys_ram = 0xc0000000,
384 .phys_io = 0x80000000,
385 .io_pg_offst = ((0xf8000000) >> 18) & 0xfffc,
386 .boot_params = 0xc0000100,
387 .map_io = h3100_map_io,
388 .init_irq = sa1100_init_irq,
389 .timer = &sa1100_timer,
390 .init_machine = h3xxx_mach_init,
391 MACHINE_END
392
393 #endif /* CONFIG_SA1100_H3100 */
394
395 /************************* H3600 *************************/
396
397 #ifdef CONFIG_SA1100_H3600
398
399 #define H3600_EGPIO (*(volatile unsigned int *)H3600_EGPIO_VIRT)
400 static unsigned int h3600_egpio = EGPIO_H3600_RS232_ON;
401
402 static void h3600_control_egpio(enum ipaq_egpio_type x, int setp)
403 {
404 unsigned int egpio = 0;
405 unsigned long flags;
406
407 switch (x) {
408 case IPAQ_EGPIO_LCD_POWER:
409 egpio |= EGPIO_H3600_LCD_ON |
410 EGPIO_H3600_LCD_PCI |
411 EGPIO_H3600_LCD_5V_ON |
412 EGPIO_H3600_LVDD_ON;
413 do_blank(setp);
414 break;
415 case IPAQ_EGPIO_LCD_ENABLE:
416 break;
417 case IPAQ_EGPIO_CODEC_NRESET:
418 egpio |= EGPIO_H3600_CODEC_NRESET;
419 break;
420 case IPAQ_EGPIO_AUDIO_ON:
421 egpio |= EGPIO_H3600_AUD_AMP_ON |
422 EGPIO_H3600_AUD_PWR_ON;
423 break;
424 case IPAQ_EGPIO_QMUTE:
425 egpio |= EGPIO_H3600_QMUTE;
426 break;
427 case IPAQ_EGPIO_OPT_NVRAM_ON:
428 egpio |= EGPIO_H3600_OPT_NVRAM_ON;
429 break;
430 case IPAQ_EGPIO_OPT_ON:
431 egpio |= EGPIO_H3600_OPT_ON;
432 break;
433 case IPAQ_EGPIO_CARD_RESET:
434 egpio |= EGPIO_H3600_CARD_RESET;
435 break;
436 case IPAQ_EGPIO_OPT_RESET:
437 egpio |= EGPIO_H3600_OPT_RESET;
438 break;
439 case IPAQ_EGPIO_IR_ON:
440 egpio |= EGPIO_H3600_IR_ON;
441 break;
442 case IPAQ_EGPIO_IR_FSEL:
443 egpio |= EGPIO_H3600_IR_FSEL;
444 break;
445 case IPAQ_EGPIO_RS232_ON:
446 egpio |= EGPIO_H3600_RS232_ON;
447 break;
448 case IPAQ_EGPIO_VPP_ON:
449 egpio |= EGPIO_H3600_VPP_ON;
450 break;
451 }
452
453 if (egpio) {
454 local_irq_save(flags);
455 if (setp)
456 h3600_egpio |= egpio;
457 else
458 h3600_egpio &= ~egpio;
459 H3600_EGPIO = h3600_egpio;
460 local_irq_restore(flags);
461 }
462 }
463
464 static unsigned long h3600_read_egpio(void)
465 {
466 return h3600_egpio;
467 }
468
469 static int h3600_pm_callback(int req)
470 {
471 if (ipaq_model_ops.pm_callback_aux)
472 return ipaq_model_ops.pm_callback_aux(req);
473 return 0;
474 }
475
476 static struct ipaq_model_ops h3600_model_ops __initdata = {
477 .generic_name = "3600",
478 .control = h3600_control_egpio,
479 .read = h3600_read_egpio,
480 .pm_callback = h3600_pm_callback
481 };
482
483 static void __init h3600_map_io(void)
484 {
485 h3xxx_map_io();
486
487 /* Initialize h3600-specific values here */
488
489 GPCR = 0x0fffffff; /* All outputs are set low by default */
490 GPDR = GPIO_H3600_COM_RTS | GPIO_H3600_L3_CLOCK |
491 GPIO_H3600_L3_MODE | GPIO_H3600_L3_DATA |
492 GPIO_H3600_CLK_SET1 | GPIO_H3600_CLK_SET0 |
493 GPIO_LDD15 | GPIO_LDD14 | GPIO_LDD13 | GPIO_LDD12 |
494 GPIO_LDD11 | GPIO_LDD10 | GPIO_LDD9 | GPIO_LDD8;
495
496 H3600_EGPIO = h3600_egpio; /* Maintains across sleep? */
497 ipaq_model_ops = h3600_model_ops;
498 }
499
500 MACHINE_START(H3600, "Compaq iPAQ H3600")
501 .phys_ram = 0xc0000000,
502 .phys_io = 0x80000000,
503 .io_pg_offst = ((0xf8000000) >> 18) & 0xfffc,
504 .boot_params = 0xc0000100,
505 .map_io = h3600_map_io,
506 .init_irq = sa1100_init_irq,
507 .timer = &sa1100_timer,
508 .init_machine = h3xxx_mach_init,
509 MACHINE_END
510
511 #endif /* CONFIG_SA1100_H3600 */
512
513 #ifdef CONFIG_SA1100_H3800
514
515 #define SET_ASIC1(x) \
516 do {if (setp) { H3800_ASIC1_GPIO_OUT |= (x); } else { H3800_ASIC1_GPIO_OUT &= ~(x); }} while(0)
517
518 #define SET_ASIC2(x) \
519 do {if (setp) { H3800_ASIC2_GPIOPIOD |= (x); } else { H3800_ASIC2_GPIOPIOD &= ~(x); }} while(0)
520
521 #define CLEAR_ASIC1(x) \
522 do {if (setp) { H3800_ASIC1_GPIO_OUT &= ~(x); } else { H3800_ASIC1_GPIO_OUT |= (x); }} while(0)
523
524 #define CLEAR_ASIC2(x) \
525 do {if (setp) { H3800_ASIC2_GPIOPIOD &= ~(x); } else { H3800_ASIC2_GPIOPIOD |= (x); }} while(0)
526
527
528 /*
529 On screen enable, we get
530
531 h3800_video_power_on(1)
532 LCD controller starts
533 h3800_video_lcd_enable(1)
534
535 On screen disable, we get
536
537 h3800_video_lcd_enable(0)
538 LCD controller stops
539 h3800_video_power_on(0)
540 */
541
542
543 static void h3800_video_power_on(int setp)
544 {
545 if (setp) {
546 H3800_ASIC1_GPIO_OUT |= GPIO1_LCD_ON;
547 msleep(30);
548 H3800_ASIC1_GPIO_OUT |= GPIO1_VGL_ON;
549 msleep(5);
550 H3800_ASIC1_GPIO_OUT |= GPIO1_VGH_ON;
551 msleep(50);
552 H3800_ASIC1_GPIO_OUT |= GPIO1_LCD_5V_ON;
553 msleep(5);
554 } else {
555 msleep(5);
556 H3800_ASIC1_GPIO_OUT &= ~GPIO1_LCD_5V_ON;
557 msleep(50);
558 H3800_ASIC1_GPIO_OUT &= ~GPIO1_VGL_ON;
559 msleep(5);
560 H3800_ASIC1_GPIO_OUT &= ~GPIO1_VGH_ON;
561 msleep(100);
562 H3800_ASIC1_GPIO_OUT &= ~GPIO1_LCD_ON;
563 }
564 }
565
566 static void h3800_video_lcd_enable(int setp)
567 {
568 if (setp) {
569 msleep(17); // Wait one from before turning on
570 H3800_ASIC1_GPIO_OUT |= GPIO1_LCD_PCI;
571 } else {
572 H3800_ASIC1_GPIO_OUT &= ~GPIO1_LCD_PCI;
573 msleep(30); // Wait before turning off
574 }
575 }
576
577
578 static void h3800_control_egpio(enum ipaq_egpio_type x, int setp)
579 {
580 switch (x) {
581 case IPAQ_EGPIO_LCD_POWER:
582 h3800_video_power_on(setp);
583 break;
584 case IPAQ_EGPIO_LCD_ENABLE:
585 h3800_video_lcd_enable(setp);
586 break;
587 case IPAQ_EGPIO_CODEC_NRESET:
588 case IPAQ_EGPIO_AUDIO_ON:
589 case IPAQ_EGPIO_QMUTE:
590 printk("%s: error - should not be called\n", __FUNCTION__);
591 break;
592 case IPAQ_EGPIO_OPT_NVRAM_ON:
593 SET_ASIC2(GPIO2_OPT_ON_NVRAM);
594 break;
595 case IPAQ_EGPIO_OPT_ON:
596 SET_ASIC2(GPIO2_OPT_ON);
597 break;
598 case IPAQ_EGPIO_CARD_RESET:
599 SET_ASIC2(GPIO2_OPT_PCM_RESET);
600 break;
601 case IPAQ_EGPIO_OPT_RESET:
602 SET_ASIC2(GPIO2_OPT_RESET);
603 break;
604 case IPAQ_EGPIO_IR_ON:
605 CLEAR_ASIC1(GPIO1_IR_ON_N);
606 break;
607 case IPAQ_EGPIO_IR_FSEL:
608 break;
609 case IPAQ_EGPIO_RS232_ON:
610 SET_ASIC1(GPIO1_RS232_ON);
611 break;
612 case IPAQ_EGPIO_VPP_ON:
613 H3800_ASIC2_FlashWP_VPP_ON = setp;
614 break;
615 }
616 }
617
618 static unsigned long h3800_read_egpio(void)
619 {
620 return H3800_ASIC1_GPIO_OUT | (H3800_ASIC2_GPIOPIOD << 16);
621 }
622
623 /* We need to fix ASIC2 GPIO over suspend/resume. At the moment,
624 it doesn't appear that ASIC1 GPIO has the same problem */
625
626 static int h3800_pm_callback(int req)
627 {
628 static u16 asic1_data;
629 static u16 asic2_data;
630 int result = 0;
631
632 printk("%s %d\n", __FUNCTION__, req);
633
634 switch (req) {
635 case PM_RESUME:
636 MSC2 = (MSC2 & 0x0000ffff) | 0xE4510000; /* Set MSC2 correctly */
637
638 H3800_ASIC2_GPIOPIOD = asic2_data;
639 H3800_ASIC2_GPIODIR = GPIO2_PEN_IRQ
640 | GPIO2_SD_DETECT
641 | GPIO2_EAR_IN_N
642 | GPIO2_USB_DETECT_N
643 | GPIO2_SD_CON_SLT;
644
645 H3800_ASIC1_GPIO_OUT = asic1_data;
646
647 if (ipaq_model_ops.pm_callback_aux)
648 result = ipaq_model_ops.pm_callback_aux(req);
649 break;
650
651 case PM_SUSPEND:
652 if (ipaq_model_ops.pm_callback_aux &&
653 ((result = ipaq_model_ops.pm_callback_aux(req)) != 0))
654 return result;
655
656 asic1_data = H3800_ASIC1_GPIO_OUT;
657 asic2_data = H3800_ASIC2_GPIOPIOD;
658 break;
659 default:
660 printk("%s: unrecognized PM callback\n", __FUNCTION__);
661 break;
662 }
663 return result;
664 }
665
666 static struct ipaq_model_ops h3800_model_ops __initdata = {
667 .generic_name = "3800",
668 .control = h3800_control_egpio,
669 .read = h3800_read_egpio,
670 .pm_callback = h3800_pm_callback
671 };
672
673 #define MAX_ASIC_ISR_LOOPS 20
674
675 /* The order of these is important - see #include <asm/arch/irqs.h> */
676 static u32 kpio_irq_mask[] = {
677 KPIO_KEY_ALL,
678 KPIO_SPI_INT,
679 KPIO_OWM_INT,
680 KPIO_ADC_INT,
681 KPIO_UART_0_INT,
682 KPIO_UART_1_INT,
683 KPIO_TIMER_0_INT,
684 KPIO_TIMER_1_INT,
685 KPIO_TIMER_2_INT
686 };
687
688 static u32 gpio_irq_mask[] = {
689 GPIO2_PEN_IRQ,
690 GPIO2_SD_DETECT,
691 GPIO2_EAR_IN_N,
692 GPIO2_USB_DETECT_N,
693 GPIO2_SD_CON_SLT,
694 };
695
696 static void h3800_IRQ_demux(unsigned int irq, struct irqdesc *desc, struct pt_regs *regs)
697 {
698 int i;
699
700 if (0) printk("%s: interrupt received\n", __FUNCTION__);
701
702 desc->chip->ack(irq);
703
704 for (i = 0; i < MAX_ASIC_ISR_LOOPS && (GPLR & GPIO_H3800_ASIC); i++) {
705 u32 irq;
706 int j;
707
708 /* KPIO */
709 irq = H3800_ASIC2_KPIINTFLAG;
710 if (0) printk("%s KPIO 0x%08X\n", __FUNCTION__, irq);
711 for (j = 0; j < H3800_KPIO_IRQ_COUNT; j++)
712 if (irq & kpio_irq_mask[j])
713 do_edge_IRQ(H3800_KPIO_IRQ_COUNT + j, irq_desc + H3800_KPIO_IRQ_COUNT + j, regs);
714
715 /* GPIO2 */
716 irq = H3800_ASIC2_GPIINTFLAG;
717 if (0) printk("%s GPIO 0x%08X\n", __FUNCTION__, irq);
718 for (j = 0; j < H3800_GPIO_IRQ_COUNT; j++)
719 if (irq & gpio_irq_mask[j])
720 do_edge_IRQ(H3800_GPIO_IRQ_COUNT + j, irq_desc + H3800_GPIO_IRQ_COUNT + j , regs);
721 }
722
723 if (i >= MAX_ASIC_ISR_LOOPS)
724 printk("%s: interrupt processing overrun\n", __FUNCTION__);
725
726 /* For level-based interrupts */
727 desc->chip->unmask(irq);
728
729 }
730
731 static struct irqaction h3800_irq = {
732 .name = "h3800_asic",
733 .handler = h3800_IRQ_demux,
734 .flags = SA_INTERRUPT | SA_TIMER,
735 };
736
737 u32 kpio_int_shadow = 0;
738
739
740 /* mask_ack <- IRQ is first serviced.
741 mask <- IRQ is disabled.
742 unmask <- IRQ is enabled
743
744 The INTCLR registers are poorly documented. I believe that writing
745 a "1" to the register clears the specific interrupt, but the documentation
746 indicates writing a "0" clears the interrupt. In any case, they shouldn't
747 be read (that's the INTFLAG register)
748 */
749
750 static void h3800_mask_ack_kpio_irq(unsigned int irq)
751 {
752 u32 mask = kpio_irq_mask[irq - H3800_KPIO_IRQ_START];
753 kpio_int_shadow &= ~mask;
754 H3800_ASIC2_KPIINTSTAT = kpio_int_shadow;
755 H3800_ASIC2_KPIINTCLR = mask;
756 }
757
758 static void h3800_mask_kpio_irq(unsigned int irq)
759 {
760 u32 mask = kpio_irq_mask[irq - H3800_KPIO_IRQ_START];
761 kpio_int_shadow &= ~mask;
762 H3800_ASIC2_KPIINTSTAT = kpio_int_shadow;
763 }
764
765 static void h3800_unmask_kpio_irq(unsigned int irq)
766 {
767 u32 mask = kpio_irq_mask[irq - H3800_KPIO_IRQ_START];
768 kpio_int_shadow |= mask;
769 H3800_ASIC2_KPIINTSTAT = kpio_int_shadow;
770 }
771
772 static void h3800_mask_ack_gpio_irq(unsigned int irq)
773 {
774 u32 mask = gpio_irq_mask[irq - H3800_GPIO_IRQ_START];
775 H3800_ASIC2_GPIINTSTAT &= ~mask;
776 H3800_ASIC2_GPIINTCLR = mask;
777 }
778
779 static void h3800_mask_gpio_irq(unsigned int irq)
780 {
781 u32 mask = gpio_irq_mask[irq - H3800_GPIO_IRQ_START];
782 H3800_ASIC2_GPIINTSTAT &= ~mask;
783 }
784
785 static void h3800_unmask_gpio_irq(unsigned int irq)
786 {
787 u32 mask = gpio_irq_mask[irq - H3800_GPIO_IRQ_START];
788 H3800_ASIC2_GPIINTSTAT |= mask;
789 }
790
791 static void __init h3800_init_irq(void)
792 {
793 int i;
794
795 /* Initialize standard IRQs */
796 sa1100_init_irq();
797
798 /* Disable all IRQs and set up clock */
799 H3800_ASIC2_KPIINTSTAT = 0; /* Disable all interrupts */
800 H3800_ASIC2_GPIINTSTAT = 0;
801
802 H3800_ASIC2_KPIINTCLR = 0; /* Clear all KPIO interrupts */
803 H3800_ASIC2_GPIINTCLR = 0; /* Clear all GPIO interrupts */
804
805 // H3800_ASIC2_KPIINTCLR = 0xffff; /* Clear all KPIO interrupts */
806 // H3800_ASIC2_GPIINTCLR = 0xffff; /* Clear all GPIO interrupts */
807
808 H3800_ASIC2_CLOCK_Enable |= ASIC2_CLOCK_EX0; /* 32 kHZ crystal on */
809 H3800_ASIC2_INTR_ClockPrescale |= ASIC2_INTCPS_SET;
810 H3800_ASIC2_INTR_ClockPrescale = ASIC2_INTCPS_CPS(0x0e) | ASIC2_INTCPS_SET;
811 H3800_ASIC2_INTR_TimerSet = 1;
812
813 #if 0
814 for (i = 0; i < H3800_KPIO_IRQ_COUNT; i++) {
815 int irq = i + H3800_KPIO_IRQ_START;
816 irq_desc[irq].valid = 1;
817 irq_desc[irq].probe_ok = 1;
818 set_irq_chip(irq, &h3800_kpio_irqchip);
819 }
820
821 for (i = 0; i < H3800_GPIO_IRQ_COUNT; i++) {
822 int irq = i + H3800_GPIO_IRQ_START;
823 irq_desc[irq].valid = 1;
824 irq_desc[irq].probe_ok = 1;
825 set_irq_chip(irq, &h3800_gpio_irqchip);
826 }
827 #endif
828 set_irq_type(IRQ_GPIO_H3800_ASIC, IRQT_RISING);
829 set_irq_chained_handler(IRQ_GPIO_H3800_ASIC, &h3800_IRQ_demux);
830 }
831
832
833 #define ASIC1_OUTPUTS 0x7fff /* First 15 bits are used */
834
835 static void __init h3800_map_io(void)
836 {
837 h3xxx_map_io();
838
839 /* Add wakeup on AC plug/unplug */
840 PWER |= PWER_GPIO12;
841
842 /* Initialize h3800-specific values here */
843 GPCR = 0x0fffffff; /* All outputs are set low by default */
844 GAFR = GPIO_H3800_CLK_OUT |
845 GPIO_LDD15 | GPIO_LDD14 | GPIO_LDD13 | GPIO_LDD12 |
846 GPIO_LDD11 | GPIO_LDD10 | GPIO_LDD9 | GPIO_LDD8;
847 GPDR = GPIO_H3800_CLK_OUT |
848 GPIO_H3600_COM_RTS | GPIO_H3600_L3_CLOCK |
849 GPIO_H3600_L3_MODE | GPIO_H3600_L3_DATA |
850 GPIO_LDD15 | GPIO_LDD14 | GPIO_LDD13 | GPIO_LDD12 |
851 GPIO_LDD11 | GPIO_LDD10 | GPIO_LDD9 | GPIO_LDD8;
852 TUCR = TUCR_3_6864MHz; /* Seems to be used only for the Bluetooth UART */
853
854 /* Fix the memory bus */
855 MSC2 = (MSC2 & 0x0000ffff) | 0xE4510000;
856
857 /* Set up ASIC #1 */
858 H3800_ASIC1_GPIO_DIR = ASIC1_OUTPUTS; /* All outputs */
859 H3800_ASIC1_GPIO_MASK = ASIC1_OUTPUTS; /* No interrupts */
860 H3800_ASIC1_GPIO_SLEEP_MASK = ASIC1_OUTPUTS;
861 H3800_ASIC1_GPIO_SLEEP_DIR = ASIC1_OUTPUTS;
862 H3800_ASIC1_GPIO_SLEEP_OUT = GPIO1_EAR_ON_N;
863 H3800_ASIC1_GPIO_BATT_FAULT_DIR = ASIC1_OUTPUTS;
864 H3800_ASIC1_GPIO_BATT_FAULT_OUT = GPIO1_EAR_ON_N;
865
866 H3800_ASIC1_GPIO_OUT = GPIO1_IR_ON_N
867 | GPIO1_RS232_ON
868 | GPIO1_EAR_ON_N;
869
870 /* Set up ASIC #2 */
871 H3800_ASIC2_GPIOPIOD = GPIO2_IN_Y1_N | GPIO2_IN_X1_N;
872 H3800_ASIC2_GPOBFSTAT = GPIO2_IN_Y1_N | GPIO2_IN_X1_N;
873
874 H3800_ASIC2_GPIODIR = GPIO2_PEN_IRQ
875 | GPIO2_SD_DETECT
876 | GPIO2_EAR_IN_N
877 | GPIO2_USB_DETECT_N
878 | GPIO2_SD_CON_SLT;
879
880 /* TODO : Set sleep states & battery fault states */
881
882 /* Clear VPP Enable */
883 H3800_ASIC2_FlashWP_VPP_ON = 0;
884 ipaq_model_ops = h3800_model_ops;
885 }
886
887 MACHINE_START(H3800, "Compaq iPAQ H3800")
888 .phys_ram = 0xc0000000,
889 .phys_io = 0x80000000,
890 .io_pg_offst = ((0xf8000000) >> 18) & 0xfffc,
891 .boot_params = 0xc0000100,
892 .map_io = h3800_map_io,
893 .init_irq = h3800_init_irq,
894 .timer = &sa1100_timer,
895 .init_machine = h3xxx_mach_init,
896 MACHINE_END
897
898 #endif /* CONFIG_SA1100_H3800 */
linux-next