arch/mips/alchemy/mtx-1/board_setup.c

   1 /*
   2  *
   3  * BRIEF MODULE DESCRIPTION
   4  *      4G Systems MTX-1 board setup.
   5  *
   6  * Copyright 2003, 2008 MontaVista Software Inc.
   7  * Author: MontaVista Software, Inc. <source@mvista.com>
   8  *         Bruno Randolf <bruno.randolf@4g-systems.biz>
   9  *
  10  *  This program is free software; you can redistribute  it and/or modify it
  11  *  under  the terms of  the GNU General  Public License as published by the
  12  *  Free Software Foundation;  either version 2 of the  License, or (at your
  13  *  option) any later version.
  14  *
  15  *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
  16  *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
  17  *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
  18  *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
  19  *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
  20  *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
  21  *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
  22  *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
  23  *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
  24  *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  25  *
  26  *  You should have received a copy of the  GNU General Public License along
  27  *  with this program; if not, write  to the Free Software Foundation, Inc.,
  28  *  675 Mass Ave, Cambridge, MA 02139, USA.
  29  */
  30
  31 #include <linux/gpio.h>
  32 #include <linux/init.h>
  33 #include <linux/interrupt.h>
  34 #include <linux/pm.h>
  35
  36 #include <asm/reboot.h>
  37 #include <asm/mach-au1x00/au1000.h>
  38
  39 #include <prom.h>
  40
  41 char irq_tab_alchemy[][5] __initdata = {
  42         [0] = { -1, AU1500_PCI_INTA, AU1500_PCI_INTA, 0xff, 0xff }, /* IDSEL 00 - AdapterA-Slot0 (top) */
  43         [1] = { -1, AU1500_PCI_INTB, AU1500_PCI_INTA, 0xff, 0xff }, /* IDSEL 01 - AdapterA-Slot1 (bottom) */
  44         [2] = { -1, AU1500_PCI_INTC, AU1500_PCI_INTD, 0xff, 0xff }, /* IDSEL 02 - AdapterB-Slot0 (top) */
  45         [3] = { -1, AU1500_PCI_INTD, AU1500_PCI_INTC, 0xff, 0xff }, /* IDSEL 03 - AdapterB-Slot1 (bottom) */
  46         [4] = { -1, AU1500_PCI_INTA, AU1500_PCI_INTB, 0xff, 0xff }, /* IDSEL 04 - AdapterC-Slot0 (top) */
  47         [5] = { -1, AU1500_PCI_INTB, AU1500_PCI_INTA, 0xff, 0xff }, /* IDSEL 05 - AdapterC-Slot1 (bottom) */
  48         [6] = { -1, AU1500_PCI_INTC, AU1500_PCI_INTD, 0xff, 0xff }, /* IDSEL 06 - AdapterD-Slot0 (top) */
  49         [7] = { -1, AU1500_PCI_INTD, AU1500_PCI_INTC, 0xff, 0xff }, /* IDSEL 07 - AdapterD-Slot1 (bottom) */
  50 };
  51
  52 extern int (*board_pci_idsel)(unsigned int devsel, int assert);
  53 int mtx1_pci_idsel(unsigned int devsel, int assert);
  54
  55 static void mtx1_reset(char *c)
  56 {
  57         /* Jump to the reset vector */
  58         __asm__ __volatile__("jr\t%0"::"r"(0xbfc00000));
  59 }
  60
  61 static void mtx1_power_off(void)
  62 {
  63         while (1)
  64                 asm volatile (
  65                 "       .set    mips32                                  \n"
  66                 "       wait                                            \n"
  67                 "       .set    mips0                                   \n");
  68 }
  69
  70 void __init board_setup(void)
  71 {
  72 #if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
  73         /* Enable USB power switch */
  74         alchemy_gpio_direction_output(204, 0);
  75 #endif /* defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) */
  76
  77 #ifdef CONFIG_PCI
  78 #if defined(__MIPSEB__)
  79         au_writel(0xf | (2 << 6) | (1 << 4), Au1500_PCI_CFG);
  80 #else
  81         au_writel(0xf, Au1500_PCI_CFG);
  82 #endif
  83         board_pci_idsel = mtx1_pci_idsel;
  84 #endif
  85
  86         /* Initialize sys_pinfunc */
  87         au_writel(SYS_PF_NI2, SYS_PINFUNC);
  88
  89         /* Initialize GPIO */
  90         au_writel(~0, KSEG1ADDR(AU1000_SYS_PHYS_ADDR) + SYS_TRIOUTCLR);
  91         alchemy_gpio_direction_output(0, 0);    /* Disable M66EN (PCI 66MHz) */
  92         alchemy_gpio_direction_output(3, 1);    /* Disable PCI CLKRUN# */
  93         alchemy_gpio_direction_output(1, 1);    /* Enable EXT_IO3 */
  94         alchemy_gpio_direction_output(5, 0);    /* Disable eth PHY TX_ER */
  95
  96         /* Enable LED and set it to green */
  97         alchemy_gpio_direction_output(211, 1);  /* green on */
  98         alchemy_gpio_direction_output(212, 0);  /* red off */
  99
 100         pm_power_off = mtx1_power_off;
 101         _machine_halt = mtx1_power_off;
 102         _machine_restart = mtx1_reset;
 103
 104         printk(KERN_INFO "4G Systems MTX-1 Board\n");
 105 }
 106
 107 int
 108 mtx1_pci_idsel(unsigned int devsel, int assert)
 109 {
 110         /* This function is only necessary to support a proprietary Cardbus
 111          * adapter on the mtx-1 "singleboard" variant. It triggers a custom
 112          * logic chip connected to EXT_IO3 (GPIO1) to suppress IDSEL signals.
 113          */
 114         if (assert && devsel != 0)
 115                 /* Suppress signal to Cardbus */
 116                 alchemy_gpio_set_value(1, 0);   /* set EXT_IO3 OFF */
 117         else
 118                 alchemy_gpio_set_value(1, 1);   /* set EXT_IO3 ON */
 119
 120         udelay(1);
 121         return 1;
 122 }
 123
 124 static int __init mtx1_init_irq(void)
 125 {
 126         irq_set_irq_type(AU1500_GPIO204_INT, IRQF_TRIGGER_HIGH);
 127         irq_set_irq_type(AU1500_GPIO201_INT, IRQF_TRIGGER_LOW);
 128         irq_set_irq_type(AU1500_GPIO202_INT, IRQF_TRIGGER_LOW);
 129         irq_set_irq_type(AU1500_GPIO203_INT, IRQF_TRIGGER_LOW);
 130         irq_set_irq_type(AU1500_GPIO205_INT, IRQF_TRIGGER_LOW);
 131
 132         return 0;
 133 }
 134 arch_initcall(mtx1_init_irq);