1 /* MN10300 on-board serial port module registers
3 * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
4 * Written by David Howells (dhowells@redhat.com)
6 * This program is free software; you can redistribute it and/or
7 * modify it under the terms of the GNU General Public Licence
8 * as published by the Free Software Foundation; either version
9 * 2 of the Licence, or (at your option) any later version.
12 #ifndef _ASM_SERIAL_REGS_H
13 #define _ASM_SERIAL_REGS_H
15 #include <asm/cpu-regs.h>
16 #include <asm/intctl-regs.h>
21 #define SC0CTR __SYSREG(0xd4002000, u16) /* control reg */
22 #define SC01CTR_CK 0x0007 /* clock source select */
23 #define SC01CTR_CK_IOCLK_8 0x0001 /* - 1/8 IOCLK */
24 #define SC01CTR_CK_IOCLK_32 0x0002 /* - 1/32 IOCLK */
25 #define SC01CTR_CK_EXTERN_8 0x0006 /* - 1/8 external closk */
26 #define SC01CTR_CK_EXTERN 0x0007 /* - external closk */
27 #if defined(CONFIG_AM33_2) || defined(CONFIG_AM33_3)
28 #define SC0CTR_CK_TM8UFLOW_8 0x0000 /* - 1/8 timer 8 underflow (serial port 0 only) */
29 #define SC0CTR_CK_TM2UFLOW_2 0x0003 /* - 1/2 timer 2 underflow (serial port 0 only) */
30 #define SC0CTR_CK_TM0UFLOW_8 0x0004 /* - 1/8 timer 0 underflow (serial port 0 only) */
31 #define SC0CTR_CK_TM2UFLOW_8 0x0005 /* - 1/8 timer 2 underflow (serial port 0 only) */
32 #define SC1CTR_CK_TM9UFLOW_8 0x0000 /* - 1/8 timer 9 underflow (serial port 1 only) */
33 #define SC1CTR_CK_TM3UFLOW_2 0x0003 /* - 1/2 timer 3 underflow (serial port 1 only) */
34 #define SC1CTR_CK_TM1UFLOW_8 0x0004 /* - 1/8 timer 1 underflow (serial port 1 only) */
35 #define SC1CTR_CK_TM3UFLOW_8 0x0005 /* - 1/8 timer 3 underflow (serial port 1 only) */
36 #else /* CONFIG_AM33_2 || CONFIG_AM33_3 */
37 #define SC0CTR_CK_TM8UFLOW_8 0x0000 /* - 1/8 timer 8 underflow (serial port 0 only) */
38 #define SC0CTR_CK_TM0UFLOW_8 0x0004 /* - 1/8 timer 0 underflow (serial port 0 only) */
39 #define SC0CTR_CK_TM2UFLOW_8 0x0005 /* - 1/8 timer 2 underflow (serial port 0 only) */
40 #define SC1CTR_CK_TM12UFLOW_8 0x0000 /* - 1/8 timer 12 underflow (serial port 1 only) */
41 #endif /* CONFIG_AM33_2 || CONFIG_AM33_3 */
42 #define SC01CTR_STB 0x0008 /* stop bit select */
43 #define SC01CTR_STB_1BIT 0x0000 /* - 1 stop bit */
44 #define SC01CTR_STB_2BIT 0x0008 /* - 2 stop bits */
45 #define SC01CTR_PB 0x0070 /* parity bit select */
46 #define SC01CTR_PB_NONE 0x0000 /* - no parity */
47 #define SC01CTR_PB_FIXED0 0x0040 /* - fixed at 0 */
48 #define SC01CTR_PB_FIXED1 0x0050 /* - fixed at 1 */
49 #define SC01CTR_PB_EVEN 0x0060 /* - even parity */
50 #define SC01CTR_PB_ODD 0x0070 /* - odd parity */
51 #define SC01CTR_CLN 0x0080 /* character length */
52 #define SC01CTR_CLN_7BIT 0x0000 /* - 7 bit chars */
53 #define SC01CTR_CLN_8BIT 0x0080 /* - 8 bit chars */
54 #define SC01CTR_TOE 0x0100 /* T input output enable */
55 #define SC01CTR_OD 0x0200 /* bit order select */
56 #define SC01CTR_OD_LSBFIRST 0x0000 /* - LSB first */
57 #define SC01CTR_OD_MSBFIRST 0x0200 /* - MSB first */
58 #define SC01CTR_MD 0x0c00 /* mode select */
59 #define SC01CTR_MD_STST_SYNC 0x0000 /* - start-stop synchronous */
60 #define SC01CTR_MD_CLOCK_SYNC1 0x0400 /* - clock synchronous 1 */
61 #define SC01CTR_MD_I2C 0x0800 /* - I2C mode */
62 #define SC01CTR_MD_CLOCK_SYNC2 0x0c00 /* - clock synchronous 2 */
63 #define SC01CTR_IIC 0x1000 /* I2C mode select */
64 #define SC01CTR_BKE 0x2000 /* break transmit enable */
65 #define SC01CTR_RXE 0x4000 /* receive enable */
66 #define SC01CTR_TXE 0x8000 /* transmit enable */
68 #define SC0ICR __SYSREG(0xd4002004, u8) /* interrupt control reg */
69 #define SC01ICR_DMD 0x80 /* output data mode */
70 #define SC01ICR_TD 0x20 /* transmit DMA trigger cause */
71 #define SC01ICR_TI 0x10 /* transmit interrupt cause */
72 #define SC01ICR_RES 0x04 /* receive error select */
73 #define SC01ICR_RI 0x01 /* receive interrupt cause */
75 #define SC0TXB __SYSREG(0xd4002008, u8) /* transmit buffer reg */
76 #define SC0RXB __SYSREG(0xd4002009, u8) /* receive buffer reg */
78 #define SC0STR __SYSREG(0xd400200c, u16) /* status reg */
79 #define SC01STR_OEF 0x0001 /* overrun error found */
80 #define SC01STR_PEF 0x0002 /* parity error found */
81 #define SC01STR_FEF 0x0004 /* framing error found */
82 #define SC01STR_RBF 0x0010 /* receive buffer status */
83 #define SC01STR_TBF 0x0020 /* transmit buffer status */
84 #define SC01STR_RXF 0x0040 /* receive status */
85 #define SC01STR_TXF 0x0080 /* transmit status */
86 #define SC01STR_STF 0x0100 /* I2C start sequence found */
87 #define SC01STR_SPF 0x0200 /* I2C stop sequence found */
89 #define SC0RXIRQ 20 /* timer 0 Receive IRQ */
90 #define SC0TXIRQ 21 /* timer 0 Transmit IRQ */
92 #define SC0RXICR GxICR(SC0RXIRQ) /* serial 0 receive intr ctrl reg */
93 #define SC0TXICR GxICR(SC0TXIRQ) /* serial 0 transmit intr ctrl reg */
96 #define SC1CTR __SYSREG(0xd4002010, u16) /* serial port 1 control */
97 #define SC1ICR __SYSREG(0xd4002014, u8) /* interrupt control reg */
98 #define SC1TXB __SYSREG(0xd4002018, u8) /* transmit buffer reg */
99 #define SC1RXB __SYSREG(0xd4002019, u8) /* receive buffer reg */
100 #define SC1STR __SYSREG(0xd400201c, u16) /* status reg */
102 #define SC1RXIRQ 22 /* timer 1 Receive IRQ */
103 #define SC1TXIRQ 23 /* timer 1 Transmit IRQ */
105 #define SC1RXICR GxICR(SC1RXIRQ) /* serial 1 receive intr ctrl reg */
106 #define SC1TXICR GxICR(SC1TXIRQ) /* serial 1 transmit intr ctrl reg */
109 #define SC2CTR __SYSREG(0xd4002020, u16) /* control reg */
111 #define SC2CTR_CK 0x0003 /* clock source select */
112 #define SC2CTR_CK_TM10UFLOW 0x0000 /* - timer 10 underflow */
113 #define SC2CTR_CK_TM2UFLOW 0x0001 /* - timer 2 underflow */
114 #define SC2CTR_CK_EXTERN 0x0002 /* - external closk */
115 #define SC2CTR_CK_TM3UFLOW 0x0003 /* - timer 3 underflow */
116 #else /* CONFIG_AM33_2 */
117 #define SC2CTR_CK 0x0007 /* clock source select */
118 #define SC2CTR_CK_TM9UFLOW_8 0x0000 /* - 1/8 timer 9 underflow */
119 #define SC2CTR_CK_IOCLK_8 0x0001 /* - 1/8 IOCLK */
120 #define SC2CTR_CK_IOCLK_32 0x0002 /* - 1/32 IOCLK */
121 #define SC2CTR_CK_TM3UFLOW_2 0x0003 /* - 1/2 timer 3 underflow */
122 #define SC2CTR_CK_TM1UFLOW_8 0x0004 /* - 1/8 timer 1 underflow */
123 #define SC2CTR_CK_TM3UFLOW_8 0x0005 /* - 1/8 timer 3 underflow */
124 #define SC2CTR_CK_EXTERN_8 0x0006 /* - 1/8 external closk */
125 #define SC2CTR_CK_EXTERN 0x0007 /* - external closk */
126 #endif /* CONFIG_AM33_2 */
127 #define SC2CTR_STB 0x0008 /* stop bit select */
128 #define SC2CTR_STB_1BIT 0x0000 /* - 1 stop bit */
129 #define SC2CTR_STB_2BIT 0x0008 /* - 2 stop bits */
130 #define SC2CTR_PB 0x0070 /* parity bit select */
131 #define SC2CTR_PB_NONE 0x0000 /* - no parity */
132 #define SC2CTR_PB_FIXED0 0x0040 /* - fixed at 0 */
133 #define SC2CTR_PB_FIXED1 0x0050 /* - fixed at 1 */
134 #define SC2CTR_PB_EVEN 0x0060 /* - even parity */
135 #define SC2CTR_PB_ODD 0x0070 /* - odd parity */
136 #define SC2CTR_CLN 0x0080 /* character length */
137 #define SC2CTR_CLN_7BIT 0x0000 /* - 7 bit chars */
138 #define SC2CTR_CLN_8BIT 0x0080 /* - 8 bit chars */
139 #define SC2CTR_TWE 0x0100 /* transmit wait enable (enable XCTS control) */
140 #define SC2CTR_OD 0x0200 /* bit order select */
141 #define SC2CTR_OD_LSBFIRST 0x0000 /* - LSB first */
142 #define SC2CTR_OD_MSBFIRST 0x0200 /* - MSB first */
143 #define SC2CTR_TWS 0x1000 /* transmit wait select */
144 #define SC2CTR_TWS_XCTS_HIGH 0x0000 /* - interrupt TX when XCTS high */
145 #define SC2CTR_TWS_XCTS_LOW 0x1000 /* - interrupt TX when XCTS low */
146 #define SC2CTR_BKE 0x2000 /* break transmit enable */
147 #define SC2CTR_RXE 0x4000 /* receive enable */
148 #define SC2CTR_TXE 0x8000 /* transmit enable */
150 #define SC2ICR __SYSREG(0xd4002024, u8) /* interrupt control reg */
151 #define SC2ICR_TD 0x20 /* transmit DMA trigger cause */
152 #define SC2ICR_TI 0x10 /* transmit interrupt cause */
153 #define SC2ICR_RES 0x04 /* receive error select */
154 #define SC2ICR_RI 0x01 /* receive interrupt cause */
156 #define SC2TXB __SYSREG(0xd4002028, u8) /* transmit buffer reg */
157 #define SC2RXB __SYSREG(0xd4002029, u8) /* receive buffer reg */
160 #define SC2STR __SYSREG(0xd400202c, u8) /* status reg */
161 #else /* CONFIG_AM33_2 */
162 #define SC2STR __SYSREG(0xd400202c, u16) /* status reg */
163 #endif /* CONFIG_AM33_2 */
164 #define SC2STR_OEF 0x0001 /* overrun error found */
165 #define SC2STR_PEF 0x0002 /* parity error found */
166 #define SC2STR_FEF 0x0004 /* framing error found */
167 #define SC2STR_CTS 0x0008 /* XCTS input pin status (0 means high) */
168 #define SC2STR_RBF 0x0010 /* receive buffer status */
169 #define SC2STR_TBF 0x0020 /* transmit buffer status */
170 #define SC2STR_RXF 0x0040 /* receive status */
171 #define SC2STR_TXF 0x0080 /* transmit status */
174 #define SC2TIM __SYSREG(0xd400202d, u8) /* status reg */
178 #define SC2RXIRQ 24 /* serial 2 Receive IRQ */
179 #define SC2TXIRQ 25 /* serial 2 Transmit IRQ */
180 #else /* CONFIG_AM33_2 */
181 #define SC2RXIRQ 68 /* serial 2 Receive IRQ */
182 #define SC2TXIRQ 69 /* serial 2 Transmit IRQ */
183 #endif /* CONFIG_AM33_2 */
185 #define SC2RXICR GxICR(SC2RXIRQ) /* serial 2 receive intr ctrl reg */
186 #define SC2TXICR GxICR(SC2TXIRQ) /* serial 2 transmit intr ctrl reg */
189 #endif /* __KERNEL__ */
191 #endif /* _ASM_SERIAL_REGS_H */
