Add linux-next specific files for 20110831
[linux-2.6/next.git] / arch / powerpc / platforms / iseries / exception.S
blobf519ee17ff7dd6f8d1c7509e6b400172cd79956f
1 /*
2  *  Low level routines for legacy iSeries support.
3  *
4  *  Extracted from head_64.S
5  *
6  *  PowerPC version
7  *    Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
8  *
9  *  Rewritten by Cort Dougan (cort@cs.nmt.edu) for PReP
10  *    Copyright (C) 1996 Cort Dougan <cort@cs.nmt.edu>
11  *  Adapted for Power Macintosh by Paul Mackerras.
12  *  Low-level exception handlers and MMU support
13  *  rewritten by Paul Mackerras.
14  *    Copyright (C) 1996 Paul Mackerras.
15  *
16  *  Adapted for 64bit PowerPC by Dave Engebretsen, Peter Bergner, and
17  *    Mike Corrigan {engebret|bergner|mikejc}@us.ibm.com
18  *
19  *  This file contains the low-level support and setup for the
20  *  PowerPC-64 platform, including trap and interrupt dispatch.
21  *
22  *  This program is free software; you can redistribute it and/or
23  *  modify it under the terms of the GNU General Public License
24  *  as published by the Free Software Foundation; either version
25  *  2 of the License, or (at your option) any later version.
26  */
28 #include <asm/reg.h>
29 #include <asm/ppc_asm.h>
30 #include <asm/asm-offsets.h>
31 #include <asm/thread_info.h>
32 #include <asm/ptrace.h>
33 #include <asm/cputable.h>
34 #include <asm/mmu.h>
36 #include "exception.h"
38         .text
40         .globl system_reset_iSeries
41 system_reset_iSeries:
42         bl      .relative_toc
43         mfspr   r13,SPRN_SPRG3          /* Get alpaca address */
44         LOAD_REG_ADDR(r23, alpaca)
45         li      r0,ALPACA_SIZE
46         sub     r23,r13,r23
47         divdu   r24,r23,r0              /* r24 has cpu number */
48         cmpwi   0,r24,0                 /* Are we processor 0? */
49         bne     1f
50         LOAD_REG_ADDR(r13, boot_paca)
51         mtspr   SPRN_SPRG_PACA,r13      /* Save it away for the future */
52         mfmsr   r23
53         ori     r23,r23,MSR_RI
54         mtmsrd  r23                     /* RI on */
55         b       .__start_initialization_iSeries /* Start up the first processor */
56 1:      mfspr   r4,SPRN_CTRLF
57         li      r5,CTRL_RUNLATCH        /* Turn off the run light */
58         andc    r4,r4,r5
59         mtspr   SPRN_CTRLT,r4
61 /* Spin on __secondary_hold_spinloop until it is updated by the boot cpu. */
62 /* In the UP case we'll yield() later, and we will not access the paca anyway */
63 #ifdef CONFIG_SMP
64 iSeries_secondary_wait_paca:
65         HMT_LOW
66         LOAD_REG_ADDR(r23, __secondary_hold_spinloop)
67         ld      r23,0(r23)
69         cmpdi   0,r23,0
70         bne     2f                      /* go on when the master is ready */
72         /* Keep poking the Hypervisor until we're released */
73         /* 8002 is a call to HvCallCfg::getLps, a harmless Hypervisor function */
74         lis     r3,0x8002
75         rldicr  r3,r3,32,15             /* r0 = (r3 << 32) & 0xffff000000000000 */
76         li      r0,-1                   /* r0=-1 indicates a Hypervisor call */
77         sc                              /* Invoke the hypervisor via a system call */
78         b       iSeries_secondary_wait_paca
81         HMT_MEDIUM
82         sync
84         LOAD_REG_ADDR(r3, nr_cpu_ids)   /* get number of pacas allocated */
85         lwz     r3,0(r3)                /* nr_cpus= or NR_CPUS can limit */
86         cmpld   0,r24,r3                /* is our cpu number allocated? */
87         bge     iSeries_secondary_yield /* no, yield forever */
89         /* Load our paca now that it's been allocated */
90         LOAD_REG_ADDR(r13, paca)
91         ld      r13,0(r13)
92         mulli   r0,r24,PACA_SIZE
93         add     r13,r13,r0
94         mtspr   SPRN_SPRG_PACA,r13      /* Save it away for the future */
95         mfmsr   r23
96         ori     r23,r23,MSR_RI
97         mtmsrd  r23                     /* RI on */
99 iSeries_secondary_smp_loop:
100         lbz     r23,PACAPROCSTART(r13)  /* Test if this processor
101                                          * should start */
102         cmpwi   0,r23,0
103         bne     3f                      /* go on when we are told */
105         HMT_LOW
106         /* Let the Hypervisor know we are alive */
107         /* 8002 is a call to HvCallCfg::getLps, a harmless Hypervisor function */
108         lis     r3,0x8002
109         rldicr  r3,r3,32,15             /* r0 = (r3 << 32) & 0xffff000000000000 */
110         li      r0,-1                   /* r0=-1 indicates a Hypervisor call */
111         sc                              /* Invoke the hypervisor via a system call */
112         mfspr   r13,SPRN_SPRG_PACA      /* Put r13 back ???? */
113         b       iSeries_secondary_smp_loop /* wait for signal to start */
116         HMT_MEDIUM
117         sync
118         LOAD_REG_ADDR(r3,current_set)
119         sldi    r28,r24,3               /* get current_set[cpu#] */
120         ldx     r3,r3,r28
121         addi    r1,r3,THREAD_SIZE
122         subi    r1,r1,STACK_FRAME_OVERHEAD
124         b       __secondary_start               /* Loop until told to go */
125 #endif /* CONFIG_SMP */
127 iSeries_secondary_yield:
128         /* Yield the processor.  This is required for non-SMP kernels
129                 which are running on multi-threaded machines. */
130         HMT_LOW
131         lis     r3,0x8000
132         rldicr  r3,r3,32,15             /* r3 = (r3 << 32) & 0xffff000000000000 */
133         addi    r3,r3,18                /* r3 = 0x8000000000000012 which is "yield" */
134         li      r4,0                    /* "yield timed" */
135         li      r5,-1                   /* "yield forever" */
136         li      r0,-1                   /* r0=-1 indicates a Hypervisor call */
137         sc                              /* Invoke the hypervisor via a system call */
138         mfspr   r13,SPRN_SPRG_PACA      /* Put r13 back ???? */
139         b       iSeries_secondary_yield /* If SMP not configured, secondaries
140                                          * loop forever */
142 /***  ISeries-LPAR interrupt handlers ***/
144         STD_EXCEPTION_ISERIES(machine_check, PACA_EXMC)
146         .globl data_access_iSeries
147 data_access_iSeries:
148         mtspr   SPRN_SPRG_SCRATCH0,r13
149 BEGIN_FTR_SECTION
150         mfspr   r13,SPRN_SPRG_PACA
151         std     r9,PACA_EXSLB+EX_R9(r13)
152         std     r10,PACA_EXSLB+EX_R10(r13)
153         mfspr   r10,SPRN_DAR
154         mfspr   r9,SPRN_DSISR
155         srdi    r10,r10,60
156         rlwimi  r10,r9,16,0x20
157         mfcr    r9
158         cmpwi   r10,0x2c
159         beq     .do_stab_bolted_iSeries
160         ld      r10,PACA_EXSLB+EX_R10(r13)
161         std     r11,PACA_EXGEN+EX_R11(r13)
162         ld      r11,PACA_EXSLB+EX_R9(r13)
163         std     r12,PACA_EXGEN+EX_R12(r13)
164         mfspr   r12,SPRN_SPRG_SCRATCH0
165         std     r10,PACA_EXGEN+EX_R10(r13)
166         std     r11,PACA_EXGEN+EX_R9(r13)
167         std     r12,PACA_EXGEN+EX_R13(r13)
168         EXCEPTION_PROLOG_ISERIES_1
169 FTR_SECTION_ELSE
170         EXCEPTION_PROLOG_1(PACA_EXGEN, NOTEST, 0)
171         EXCEPTION_PROLOG_ISERIES_1
172 ALT_MMU_FTR_SECTION_END_IFCLR(MMU_FTR_SLB)
173         b       data_access_common
175 .do_stab_bolted_iSeries:
176         std     r11,PACA_EXSLB+EX_R11(r13)
177         std     r12,PACA_EXSLB+EX_R12(r13)
178         mfspr   r10,SPRN_SPRG_SCRATCH0
179         std     r10,PACA_EXSLB+EX_R13(r13)
180         EXCEPTION_PROLOG_ISERIES_1
181         b       .do_stab_bolted
183         .globl  data_access_slb_iSeries
184 data_access_slb_iSeries:
185         mtspr   SPRN_SPRG_SCRATCH0,r13  /* save r13 */
186         mfspr   r13,SPRN_SPRG_PACA      /* get paca address into r13 */
187         std     r3,PACA_EXSLB+EX_R3(r13)
188         mfspr   r3,SPRN_DAR
189         std     r9,PACA_EXSLB+EX_R9(r13)
190         mfcr    r9
191 #ifdef __DISABLED__
192         cmpdi   r3,0
193         bge     slb_miss_user_iseries
194 #endif
195         std     r10,PACA_EXSLB+EX_R10(r13)
196         std     r11,PACA_EXSLB+EX_R11(r13)
197         std     r12,PACA_EXSLB+EX_R12(r13)
198         mfspr   r10,SPRN_SPRG_SCRATCH0
199         std     r10,PACA_EXSLB+EX_R13(r13)
200         ld      r12,PACALPPACAPTR(r13)
201         ld      r12,LPPACASRR1(r12)
202         b       .slb_miss_realmode
204         STD_EXCEPTION_ISERIES(instruction_access, PACA_EXGEN)
206         .globl  instruction_access_slb_iSeries
207 instruction_access_slb_iSeries:
208         mtspr   SPRN_SPRG_SCRATCH0,r13  /* save r13 */
209         mfspr   r13,SPRN_SPRG_PACA      /* get paca address into r13 */
210         std     r3,PACA_EXSLB+EX_R3(r13)
211         ld      r3,PACALPPACAPTR(r13)
212         ld      r3,LPPACASRR0(r3)       /* get SRR0 value */
213         std     r9,PACA_EXSLB+EX_R9(r13)
214         mfcr    r9
215 #ifdef __DISABLED__
216         cmpdi   r3,0
217         bge     slb_miss_user_iseries
218 #endif
219         std     r10,PACA_EXSLB+EX_R10(r13)
220         std     r11,PACA_EXSLB+EX_R11(r13)
221         std     r12,PACA_EXSLB+EX_R12(r13)
222         mfspr   r10,SPRN_SPRG_SCRATCH0
223         std     r10,PACA_EXSLB+EX_R13(r13)
224         ld      r12,PACALPPACAPTR(r13)
225         ld      r12,LPPACASRR1(r12)
226         b       .slb_miss_realmode
228 #ifdef __DISABLED__
229 slb_miss_user_iseries:
230         std     r10,PACA_EXGEN+EX_R10(r13)
231         std     r11,PACA_EXGEN+EX_R11(r13)
232         std     r12,PACA_EXGEN+EX_R12(r13)
233         mfspr   r10,SPRG_SCRATCH0
234         ld      r11,PACA_EXSLB+EX_R9(r13)
235         ld      r12,PACA_EXSLB+EX_R3(r13)
236         std     r10,PACA_EXGEN+EX_R13(r13)
237         std     r11,PACA_EXGEN+EX_R9(r13)
238         std     r12,PACA_EXGEN+EX_R3(r13)
239         EXCEPTION_PROLOG_ISERIES_1
240         b       slb_miss_user_common
241 #endif
243         MASKABLE_EXCEPTION_ISERIES(hardware_interrupt)
244         STD_EXCEPTION_ISERIES(alignment, PACA_EXGEN)
245         STD_EXCEPTION_ISERIES(program_check, PACA_EXGEN)
246         STD_EXCEPTION_ISERIES(fp_unavailable, PACA_EXGEN)
247         MASKABLE_EXCEPTION_ISERIES(decrementer)
248         STD_EXCEPTION_ISERIES(trap_0a, PACA_EXGEN)
249         STD_EXCEPTION_ISERIES(trap_0b, PACA_EXGEN)
251         .globl  system_call_iSeries
252 system_call_iSeries:
253         mr      r9,r13
254         mfspr   r13,SPRN_SPRG_PACA
255         EXCEPTION_PROLOG_ISERIES_1
256         b       system_call_common
258         STD_EXCEPTION_ISERIES(single_step, PACA_EXGEN)
259         STD_EXCEPTION_ISERIES(trap_0e, PACA_EXGEN)
260         STD_EXCEPTION_ISERIES(performance_monitor, PACA_EXGEN)
262 decrementer_iSeries_masked:
263         /* We may not have a valid TOC pointer in here. */
264         li      r11,1
265         ld      r12,PACALPPACAPTR(r13)
266         stb     r11,LPPACADECRINT(r12)
267         li      r12,-1
268         clrldi  r12,r12,33      /* set DEC to 0x7fffffff */
269         mtspr   SPRN_DEC,r12
270         /* fall through */
272 hardware_interrupt_iSeries_masked:
273         mtcrf   0x80,r9         /* Restore regs */
274         ld      r12,PACALPPACAPTR(r13)
275         ld      r11,LPPACASRR0(r12)
276         ld      r12,LPPACASRR1(r12)
277         mtspr   SPRN_SRR0,r11
278         mtspr   SPRN_SRR1,r12
279         ld      r9,PACA_EXGEN+EX_R9(r13)
280         ld      r10,PACA_EXGEN+EX_R10(r13)
281         ld      r11,PACA_EXGEN+EX_R11(r13)
282         ld      r12,PACA_EXGEN+EX_R12(r13)
283         ld      r13,PACA_EXGEN+EX_R13(r13)
284         rfid
285         b       .       /* prevent speculative execution */
287 _INIT_STATIC(__start_initialization_iSeries)
288         /* Clear out the BSS */
289         LOAD_REG_ADDR(r11,__bss_stop)
290         LOAD_REG_ADDR(r8,__bss_start)
291         sub     r11,r11,r8              /* bss size                     */
292         addi    r11,r11,7               /* round up to an even double word */
293         rldicl. r11,r11,61,3            /* shift right by 3             */
294         beq     4f
295         addi    r8,r8,-8
296         li      r0,0
297         mtctr   r11                     /* zero this many doublewords   */
298 3:      stdu    r0,8(r8)
299         bdnz    3b
301         LOAD_REG_ADDR(r1,init_thread_union)
302         addi    r1,r1,THREAD_SIZE
303         li      r0,0
304         stdu    r0,-STACK_FRAME_OVERHEAD(r1)
306         bl      .iSeries_early_setup
307         bl      .early_setup
309         /* relocation is on at this point */
311         b       .start_here_common