Add linux-next specific files for 20110831
[linux-2.6/next.git] / drivers / scsi / isci / init.c
blob29aa34efb0f5bd03e3165e0918f9fed9c72b4cd3
1 /*
2 * This file is provided under a dual BSD/GPLv2 license. When using or
3 * redistributing this file, you may do so under either license.
5 * GPL LICENSE SUMMARY
7 * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
9 * This program is free software; you can redistribute it and/or modify
10 * it under the terms of version 2 of the GNU General Public License as
11 * published by the Free Software Foundation.
13 * This program is distributed in the hope that it will be useful, but
14 * WITHOUT ANY WARRANTY; without even the implied warranty of
15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
16 * General Public License for more details.
18 * You should have received a copy of the GNU General Public License
19 * along with this program; if not, write to the Free Software
20 * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
21 * The full GNU General Public License is included in this distribution
22 * in the file called LICENSE.GPL.
24 * BSD LICENSE
26 * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
27 * All rights reserved.
29 * Redistribution and use in source and binary forms, with or without
30 * modification, are permitted provided that the following conditions
31 * are met:
33 * * Redistributions of source code must retain the above copyright
34 * notice, this list of conditions and the following disclaimer.
35 * * Redistributions in binary form must reproduce the above copyright
36 * notice, this list of conditions and the following disclaimer in
37 * the documentation and/or other materials provided with the
38 * distribution.
39 * * Neither the name of Intel Corporation nor the names of its
40 * contributors may be used to endorse or promote products derived
41 * from this software without specific prior written permission.
43 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
44 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
45 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
46 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
47 * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
48 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
49 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
50 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
51 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
52 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
53 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
56 #include <linux/kernel.h>
57 #include <linux/init.h>
58 #include <linux/module.h>
59 #include <linux/firmware.h>
60 #include <linux/efi.h>
61 #include <asm/string.h>
62 #include <scsi/scsi_host.h>
63 #include "isci.h"
64 #include "task.h"
65 #include "probe_roms.h"
67 #define MAJ 1
68 #define MIN 0
69 #define BUILD 0
70 #define DRV_VERSION __stringify(MAJ) "." __stringify(MIN) "." \
71 __stringify(BUILD)
73 MODULE_VERSION(DRV_VERSION);
75 static struct scsi_transport_template *isci_transport_template;
77 static DEFINE_PCI_DEVICE_TABLE(isci_id_table) = {
78 { PCI_VDEVICE(INTEL, 0x1D61),},
79 { PCI_VDEVICE(INTEL, 0x1D63),},
80 { PCI_VDEVICE(INTEL, 0x1D65),},
81 { PCI_VDEVICE(INTEL, 0x1D67),},
82 { PCI_VDEVICE(INTEL, 0x1D69),},
83 { PCI_VDEVICE(INTEL, 0x1D6B),},
84 { PCI_VDEVICE(INTEL, 0x1D60),},
85 { PCI_VDEVICE(INTEL, 0x1D62),},
86 { PCI_VDEVICE(INTEL, 0x1D64),},
87 { PCI_VDEVICE(INTEL, 0x1D66),},
88 { PCI_VDEVICE(INTEL, 0x1D68),},
89 { PCI_VDEVICE(INTEL, 0x1D6A),},
93 MODULE_DEVICE_TABLE(pci, isci_id_table);
95 /* linux isci specific settings */
97 unsigned char no_outbound_task_to = 20;
98 module_param(no_outbound_task_to, byte, 0);
99 MODULE_PARM_DESC(no_outbound_task_to, "No Outbound Task Timeout (1us incr)");
101 u16 ssp_max_occ_to = 20;
102 module_param(ssp_max_occ_to, ushort, 0);
103 MODULE_PARM_DESC(ssp_max_occ_to, "SSP Max occupancy timeout (100us incr)");
105 u16 stp_max_occ_to = 5;
106 module_param(stp_max_occ_to, ushort, 0);
107 MODULE_PARM_DESC(stp_max_occ_to, "STP Max occupancy timeout (100us incr)");
109 u16 ssp_inactive_to = 5;
110 module_param(ssp_inactive_to, ushort, 0);
111 MODULE_PARM_DESC(ssp_inactive_to, "SSP inactivity timeout (100us incr)");
113 u16 stp_inactive_to = 5;
114 module_param(stp_inactive_to, ushort, 0);
115 MODULE_PARM_DESC(stp_inactive_to, "STP inactivity timeout (100us incr)");
117 unsigned char phy_gen = 3;
118 module_param(phy_gen, byte, 0);
119 MODULE_PARM_DESC(phy_gen, "PHY generation (1: 1.5Gbps 2: 3.0Gbps 3: 6.0Gbps)");
121 unsigned char max_concurr_spinup = 1;
122 module_param(max_concurr_spinup, byte, 0);
123 MODULE_PARM_DESC(max_concurr_spinup, "Max concurrent device spinup");
125 static ssize_t isci_show_id(struct device *dev, struct device_attribute *attr, char *buf)
127 struct Scsi_Host *shost = container_of(dev, typeof(*shost), shost_dev);
128 struct sas_ha_struct *sas_ha = SHOST_TO_SAS_HA(shost);
129 struct isci_host *ihost = container_of(sas_ha, typeof(*ihost), sas_ha);
131 return snprintf(buf, PAGE_SIZE, "%d\n", ihost->id);
134 static DEVICE_ATTR(isci_id, S_IRUGO, isci_show_id, NULL);
136 struct device_attribute *isci_host_attrs[] = {
137 &dev_attr_isci_id,
138 NULL
141 static struct scsi_host_template isci_sht = {
143 .module = THIS_MODULE,
144 .name = DRV_NAME,
145 .proc_name = DRV_NAME,
146 .queuecommand = sas_queuecommand,
147 .target_alloc = sas_target_alloc,
148 .slave_configure = sas_slave_configure,
149 .slave_destroy = sas_slave_destroy,
150 .scan_finished = isci_host_scan_finished,
151 .scan_start = isci_host_scan_start,
152 .change_queue_depth = sas_change_queue_depth,
153 .change_queue_type = sas_change_queue_type,
154 .bios_param = sas_bios_param,
155 .can_queue = ISCI_CAN_QUEUE_VAL,
156 .cmd_per_lun = 1,
157 .this_id = -1,
158 .sg_tablesize = SG_ALL,
159 .max_sectors = SCSI_DEFAULT_MAX_SECTORS,
160 .use_clustering = ENABLE_CLUSTERING,
161 .eh_device_reset_handler = sas_eh_device_reset_handler,
162 .eh_bus_reset_handler = isci_bus_reset_handler,
163 .slave_alloc = sas_slave_alloc,
164 .target_destroy = sas_target_destroy,
165 .ioctl = sas_ioctl,
166 .shost_attrs = isci_host_attrs,
169 static struct sas_domain_function_template isci_transport_ops = {
171 /* The class calls these to notify the LLDD of an event. */
172 .lldd_port_formed = isci_port_formed,
173 .lldd_port_deformed = isci_port_deformed,
175 /* The class calls these when a device is found or gone. */
176 .lldd_dev_found = isci_remote_device_found,
177 .lldd_dev_gone = isci_remote_device_gone,
179 .lldd_execute_task = isci_task_execute_task,
180 /* Task Management Functions. Must be called from process context. */
181 .lldd_abort_task = isci_task_abort_task,
182 .lldd_abort_task_set = isci_task_abort_task_set,
183 .lldd_clear_aca = isci_task_clear_aca,
184 .lldd_clear_task_set = isci_task_clear_task_set,
185 .lldd_I_T_nexus_reset = isci_task_I_T_nexus_reset,
186 .lldd_lu_reset = isci_task_lu_reset,
187 .lldd_query_task = isci_task_query_task,
189 /* Port and Adapter management */
190 .lldd_clear_nexus_port = isci_task_clear_nexus_port,
191 .lldd_clear_nexus_ha = isci_task_clear_nexus_ha,
193 /* Phy management */
194 .lldd_control_phy = isci_phy_control,
198 /******************************************************************************
199 * P R O T E C T E D M E T H O D S
200 ******************************************************************************/
205 * isci_register_sas_ha() - This method initializes various lldd
206 * specific members of the sas_ha struct and calls the libsas
207 * sas_register_ha() function.
208 * @isci_host: This parameter specifies the lldd specific wrapper for the
209 * libsas sas_ha struct.
211 * This method returns an error code indicating sucess or failure. The user
212 * should check for possible memory allocation error return otherwise, a zero
213 * indicates success.
215 static int isci_register_sas_ha(struct isci_host *isci_host)
217 int i;
218 struct sas_ha_struct *sas_ha = &(isci_host->sas_ha);
219 struct asd_sas_phy **sas_phys;
220 struct asd_sas_port **sas_ports;
222 sas_phys = devm_kzalloc(&isci_host->pdev->dev,
223 SCI_MAX_PHYS * sizeof(void *),
224 GFP_KERNEL);
225 if (!sas_phys)
226 return -ENOMEM;
228 sas_ports = devm_kzalloc(&isci_host->pdev->dev,
229 SCI_MAX_PORTS * sizeof(void *),
230 GFP_KERNEL);
231 if (!sas_ports)
232 return -ENOMEM;
234 /*----------------- Libsas Initialization Stuff----------------------
235 * Set various fields in the sas_ha struct:
238 sas_ha->sas_ha_name = DRV_NAME;
239 sas_ha->lldd_module = THIS_MODULE;
240 sas_ha->sas_addr = &isci_host->phys[0].sas_addr[0];
242 /* set the array of phy and port structs. */
243 for (i = 0; i < SCI_MAX_PHYS; i++) {
244 sas_phys[i] = &isci_host->phys[i].sas_phy;
245 sas_ports[i] = &isci_host->ports[i].sas_port;
248 sas_ha->sas_phy = sas_phys;
249 sas_ha->sas_port = sas_ports;
250 sas_ha->num_phys = SCI_MAX_PHYS;
252 sas_ha->lldd_queue_size = ISCI_CAN_QUEUE_VAL;
253 sas_ha->lldd_max_execute_num = 1;
254 sas_ha->strict_wide_ports = 1;
256 sas_register_ha(sas_ha);
258 return 0;
261 static void isci_unregister(struct isci_host *isci_host)
263 struct Scsi_Host *shost;
265 if (!isci_host)
266 return;
268 shost = isci_host->shost;
270 sas_unregister_ha(&isci_host->sas_ha);
272 sas_remove_host(isci_host->shost);
273 scsi_remove_host(isci_host->shost);
274 scsi_host_put(isci_host->shost);
277 static int __devinit isci_pci_init(struct pci_dev *pdev)
279 int err, bar_num, bar_mask = 0;
280 void __iomem * const *iomap;
282 err = pcim_enable_device(pdev);
283 if (err) {
284 dev_err(&pdev->dev,
285 "failed enable PCI device %s!\n",
286 pci_name(pdev));
287 return err;
290 for (bar_num = 0; bar_num < SCI_PCI_BAR_COUNT; bar_num++)
291 bar_mask |= 1 << (bar_num * 2);
293 err = pcim_iomap_regions(pdev, bar_mask, DRV_NAME);
294 if (err)
295 return err;
297 iomap = pcim_iomap_table(pdev);
298 if (!iomap)
299 return -ENOMEM;
301 pci_set_master(pdev);
303 err = pci_set_dma_mask(pdev, DMA_BIT_MASK(64));
304 if (err) {
305 err = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
306 if (err)
307 return err;
310 err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64));
311 if (err) {
312 err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
313 if (err)
314 return err;
317 return 0;
320 static int num_controllers(struct pci_dev *pdev)
322 /* bar size alone can tell us if we are running with a dual controller
323 * part, no need to trust revision ids that might be under broken firmware
324 * control
326 resource_size_t scu_bar_size = pci_resource_len(pdev, SCI_SCU_BAR*2);
327 resource_size_t smu_bar_size = pci_resource_len(pdev, SCI_SMU_BAR*2);
329 if (scu_bar_size >= SCI_SCU_BAR_SIZE*SCI_MAX_CONTROLLERS &&
330 smu_bar_size >= SCI_SMU_BAR_SIZE*SCI_MAX_CONTROLLERS)
331 return SCI_MAX_CONTROLLERS;
332 else
333 return 1;
336 static int isci_setup_interrupts(struct pci_dev *pdev)
338 int err, i, num_msix;
339 struct isci_host *ihost;
340 struct isci_pci_info *pci_info = to_pci_info(pdev);
343 * Determine the number of vectors associated with this
344 * PCI function.
346 num_msix = num_controllers(pdev) * SCI_NUM_MSI_X_INT;
348 for (i = 0; i < num_msix; i++)
349 pci_info->msix_entries[i].entry = i;
351 err = pci_enable_msix(pdev, pci_info->msix_entries, num_msix);
352 if (err)
353 goto intx;
355 for (i = 0; i < num_msix; i++) {
356 int id = i / SCI_NUM_MSI_X_INT;
357 struct msix_entry *msix = &pci_info->msix_entries[i];
358 irq_handler_t isr;
360 ihost = pci_info->hosts[id];
361 /* odd numbered vectors are error interrupts */
362 if (i & 1)
363 isr = isci_error_isr;
364 else
365 isr = isci_msix_isr;
367 err = devm_request_irq(&pdev->dev, msix->vector, isr, 0,
368 DRV_NAME"-msix", ihost);
369 if (!err)
370 continue;
372 dev_info(&pdev->dev, "msix setup failed falling back to intx\n");
373 while (i--) {
374 id = i / SCI_NUM_MSI_X_INT;
375 ihost = pci_info->hosts[id];
376 msix = &pci_info->msix_entries[i];
377 devm_free_irq(&pdev->dev, msix->vector, ihost);
379 pci_disable_msix(pdev);
380 goto intx;
382 return 0;
384 intx:
385 for_each_isci_host(i, ihost, pdev) {
386 err = devm_request_irq(&pdev->dev, pdev->irq, isci_intx_isr,
387 IRQF_SHARED, DRV_NAME"-intx", ihost);
388 if (err)
389 break;
391 return err;
394 static struct isci_host *isci_host_alloc(struct pci_dev *pdev, int id)
396 struct isci_host *isci_host;
397 struct Scsi_Host *shost;
398 int err;
400 isci_host = devm_kzalloc(&pdev->dev, sizeof(*isci_host), GFP_KERNEL);
401 if (!isci_host)
402 return NULL;
404 isci_host->pdev = pdev;
405 isci_host->id = id;
407 shost = scsi_host_alloc(&isci_sht, sizeof(void *));
408 if (!shost)
409 return NULL;
410 isci_host->shost = shost;
412 err = isci_host_init(isci_host);
413 if (err)
414 goto err_shost;
416 SHOST_TO_SAS_HA(shost) = &isci_host->sas_ha;
417 isci_host->sas_ha.core.shost = shost;
418 shost->transportt = isci_transport_template;
420 shost->max_id = ~0;
421 shost->max_lun = ~0;
422 shost->max_cmd_len = MAX_COMMAND_SIZE;
424 err = scsi_add_host(shost, &pdev->dev);
425 if (err)
426 goto err_shost;
428 err = isci_register_sas_ha(isci_host);
429 if (err)
430 goto err_shost_remove;
432 return isci_host;
434 err_shost_remove:
435 scsi_remove_host(shost);
436 err_shost:
437 scsi_host_put(shost);
439 return NULL;
442 static int __devinit isci_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
444 struct isci_pci_info *pci_info;
445 int err, i;
446 struct isci_host *isci_host;
447 const struct firmware *fw = NULL;
448 struct isci_orom *orom = NULL;
449 char *source = "(platform)";
451 dev_info(&pdev->dev, "driver configured for rev: %d silicon\n",
452 pdev->revision);
454 pci_info = devm_kzalloc(&pdev->dev, sizeof(*pci_info), GFP_KERNEL);
455 if (!pci_info)
456 return -ENOMEM;
457 pci_set_drvdata(pdev, pci_info);
459 if (efi_enabled)
460 orom = isci_get_efi_var(pdev);
462 if (!orom)
463 orom = isci_request_oprom(pdev);
465 for (i = 0; orom && i < ARRAY_SIZE(orom->ctrl); i++) {
466 if (sci_oem_parameters_validate(&orom->ctrl[i])) {
467 dev_warn(&pdev->dev,
468 "[%d]: invalid oem parameters detected, falling back to firmware\n", i);
469 devm_kfree(&pdev->dev, orom);
470 orom = NULL;
471 break;
475 if (!orom) {
476 source = "(firmware)";
477 orom = isci_request_firmware(pdev, fw);
478 if (!orom) {
479 /* TODO convert this to WARN_TAINT_ONCE once the
480 * orom/efi parameter support is widely available
482 dev_warn(&pdev->dev,
483 "Loading user firmware failed, using default "
484 "values\n");
485 dev_warn(&pdev->dev,
486 "Default OEM configuration being used: 4 "
487 "narrow ports, and default SAS Addresses\n");
491 if (orom)
492 dev_info(&pdev->dev,
493 "OEM SAS parameters (version: %u.%u) loaded %s\n",
494 (orom->hdr.version & 0xf0) >> 4,
495 (orom->hdr.version & 0xf), source);
497 pci_info->orom = orom;
499 err = isci_pci_init(pdev);
500 if (err)
501 return err;
503 for (i = 0; i < num_controllers(pdev); i++) {
504 struct isci_host *h = isci_host_alloc(pdev, i);
506 if (!h) {
507 err = -ENOMEM;
508 goto err_host_alloc;
510 pci_info->hosts[i] = h;
513 err = isci_setup_interrupts(pdev);
514 if (err)
515 goto err_host_alloc;
517 for_each_isci_host(i, isci_host, pdev)
518 scsi_scan_host(isci_host->shost);
520 return 0;
522 err_host_alloc:
523 for_each_isci_host(i, isci_host, pdev)
524 isci_unregister(isci_host);
525 return err;
528 static void __devexit isci_pci_remove(struct pci_dev *pdev)
530 struct isci_host *ihost;
531 int i;
533 for_each_isci_host(i, ihost, pdev) {
534 isci_unregister(ihost);
535 isci_host_deinit(ihost);
536 sci_controller_disable_interrupts(ihost);
540 static struct pci_driver isci_pci_driver = {
541 .name = DRV_NAME,
542 .id_table = isci_id_table,
543 .probe = isci_pci_probe,
544 .remove = __devexit_p(isci_pci_remove),
547 static __init int isci_init(void)
549 int err;
551 pr_info("%s: Intel(R) C600 SAS Controller Driver - version %s\n",
552 DRV_NAME, DRV_VERSION);
554 isci_transport_template = sas_domain_attach_transport(&isci_transport_ops);
555 if (!isci_transport_template)
556 return -ENOMEM;
558 err = pci_register_driver(&isci_pci_driver);
559 if (err)
560 sas_release_transport(isci_transport_template);
562 return err;
565 static __exit void isci_exit(void)
567 pci_unregister_driver(&isci_pci_driver);
568 sas_release_transport(isci_transport_template);
571 MODULE_LICENSE("Dual BSD/GPL");
572 MODULE_FIRMWARE(ISCI_FW_NAME);
573 module_init(isci_init);
574 module_exit(isci_exit);