1 /*******************************************************************
2 * This file is part of the Emulex Linux Device Driver for *
3 * Fibre Channel Host Bus Adapters. *
4 * Copyright (C) 2004-2011 Emulex. All rights reserved. *
5 * EMULEX and SLI are trademarks of Emulex. *
7 * Portions Copyright (C) 2004-2005 Christoph Hellwig *
9 * This program is free software; you can redistribute it and/or *
10 * modify it under the terms of version 2 of the GNU General *
11 * Public License as published by the Free Software Foundation. *
12 * This program is distributed in the hope that it will be useful. *
13 * ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND *
14 * WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, *
15 * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT, ARE *
16 * DISCLAIMED, EXCEPT TO THE EXTENT THAT SUCH DISCLAIMERS ARE HELD *
17 * TO BE LEGALLY INVALID. See the GNU General Public License for *
18 * more details, a copy of which can be found in the file COPYING *
19 * included with this package. *
20 *******************************************************************/
22 #include <linux/blkdev.h>
23 #include <linux/delay.h>
24 #include <linux/slab.h>
25 #include <linux/pci.h>
26 #include <linux/kthread.h>
27 #include <linux/interrupt.h>
29 #include <scsi/scsi.h>
30 #include <scsi/scsi_device.h>
31 #include <scsi/scsi_host.h>
32 #include <scsi/scsi_transport_fc.h>
37 #include "lpfc_disc.h"
39 #include "lpfc_sli4.h"
40 #include "lpfc_scsi.h"
42 #include "lpfc_logmsg.h"
43 #include "lpfc_crtn.h"
44 #include "lpfc_vport.h"
45 #include "lpfc_debugfs.h"
47 /* AlpaArray for assignment of scsid for scan-down and bind_method */
48 static uint8_t lpfcAlpaArray
[] = {
49 0xEF, 0xE8, 0xE4, 0xE2, 0xE1, 0xE0, 0xDC, 0xDA, 0xD9, 0xD6,
50 0xD5, 0xD4, 0xD3, 0xD2, 0xD1, 0xCE, 0xCD, 0xCC, 0xCB, 0xCA,
51 0xC9, 0xC7, 0xC6, 0xC5, 0xC3, 0xBC, 0xBA, 0xB9, 0xB6, 0xB5,
52 0xB4, 0xB3, 0xB2, 0xB1, 0xAE, 0xAD, 0xAC, 0xAB, 0xAA, 0xA9,
53 0xA7, 0xA6, 0xA5, 0xA3, 0x9F, 0x9E, 0x9D, 0x9B, 0x98, 0x97,
54 0x90, 0x8F, 0x88, 0x84, 0x82, 0x81, 0x80, 0x7C, 0x7A, 0x79,
55 0x76, 0x75, 0x74, 0x73, 0x72, 0x71, 0x6E, 0x6D, 0x6C, 0x6B,
56 0x6A, 0x69, 0x67, 0x66, 0x65, 0x63, 0x5C, 0x5A, 0x59, 0x56,
57 0x55, 0x54, 0x53, 0x52, 0x51, 0x4E, 0x4D, 0x4C, 0x4B, 0x4A,
58 0x49, 0x47, 0x46, 0x45, 0x43, 0x3C, 0x3A, 0x39, 0x36, 0x35,
59 0x34, 0x33, 0x32, 0x31, 0x2E, 0x2D, 0x2C, 0x2B, 0x2A, 0x29,
60 0x27, 0x26, 0x25, 0x23, 0x1F, 0x1E, 0x1D, 0x1B, 0x18, 0x17,
61 0x10, 0x0F, 0x08, 0x04, 0x02, 0x01
64 static void lpfc_disc_timeout_handler(struct lpfc_vport
*);
65 static void lpfc_disc_flush_list(struct lpfc_vport
*vport
);
66 static void lpfc_unregister_fcfi_cmpl(struct lpfc_hba
*, LPFC_MBOXQ_t
*);
67 static int lpfc_fcf_inuse(struct lpfc_hba
*);
70 lpfc_terminate_rport_io(struct fc_rport
*rport
)
72 struct lpfc_rport_data
*rdata
;
73 struct lpfc_nodelist
* ndlp
;
74 struct lpfc_hba
*phba
;
76 rdata
= rport
->dd_data
;
79 if (!ndlp
|| !NLP_CHK_NODE_ACT(ndlp
)) {
80 if (rport
->roles
& FC_RPORT_ROLE_FCP_TARGET
)
81 printk(KERN_ERR
"Cannot find remote node"
82 " to terminate I/O Data x%x\n",
89 lpfc_debugfs_disc_trc(ndlp
->vport
, LPFC_DISC_TRC_RPORT
,
90 "rport terminate: sid:x%x did:x%x flg:x%x",
91 ndlp
->nlp_sid
, ndlp
->nlp_DID
, ndlp
->nlp_flag
);
93 if (ndlp
->nlp_sid
!= NLP_NO_SID
) {
94 lpfc_sli_abort_iocb(ndlp
->vport
,
95 &phba
->sli
.ring
[phba
->sli
.fcp_ring
],
96 ndlp
->nlp_sid
, 0, LPFC_CTX_TGT
);
101 * This function will be called when dev_loss_tmo fire.
104 lpfc_dev_loss_tmo_callbk(struct fc_rport
*rport
)
106 struct lpfc_rport_data
*rdata
;
107 struct lpfc_nodelist
* ndlp
;
108 struct lpfc_vport
*vport
;
109 struct lpfc_hba
*phba
;
110 struct lpfc_work_evt
*evtp
;
114 rdata
= rport
->dd_data
;
116 if (!ndlp
|| !NLP_CHK_NODE_ACT(ndlp
))
122 lpfc_debugfs_disc_trc(vport
, LPFC_DISC_TRC_RPORT
,
123 "rport devlosscb: sid:x%x did:x%x flg:x%x",
124 ndlp
->nlp_sid
, ndlp
->nlp_DID
, ndlp
->nlp_flag
);
126 /* Don't defer this if we are in the process of deleting the vport
127 * or unloading the driver. The unload will cleanup the node
128 * appropriately we just need to cleanup the ndlp rport info here.
130 if (vport
->load_flag
& FC_UNLOADING
) {
131 put_node
= rdata
->pnode
!= NULL
;
132 put_rport
= ndlp
->rport
!= NULL
;
138 put_device(&rport
->dev
);
142 if (ndlp
->nlp_state
== NLP_STE_MAPPED_NODE
)
145 evtp
= &ndlp
->dev_loss_evt
;
147 if (!list_empty(&evtp
->evt_listp
))
150 spin_lock_irq(&phba
->hbalock
);
151 /* We need to hold the node by incrementing the reference
152 * count until this queued work is done
154 evtp
->evt_arg1
= lpfc_nlp_get(ndlp
);
155 if (evtp
->evt_arg1
) {
156 evtp
->evt
= LPFC_EVT_DEV_LOSS
;
157 list_add_tail(&evtp
->evt_listp
, &phba
->work_list
);
158 lpfc_worker_wake_up(phba
);
160 spin_unlock_irq(&phba
->hbalock
);
166 * lpfc_dev_loss_tmo_handler - Remote node devloss timeout handler
167 * @ndlp: Pointer to remote node object.
169 * This function is called from the worker thread when devloss timeout timer
170 * expires. For SLI4 host, this routine shall return 1 when at lease one
171 * remote node, including this @ndlp, is still in use of FCF; otherwise, this
172 * routine shall return 0 when there is no remote node is still in use of FCF
173 * when devloss timeout happened to this @ndlp.
176 lpfc_dev_loss_tmo_handler(struct lpfc_nodelist
*ndlp
)
178 struct lpfc_rport_data
*rdata
;
179 struct fc_rport
*rport
;
180 struct lpfc_vport
*vport
;
181 struct lpfc_hba
*phba
;
193 rdata
= rport
->dd_data
;
194 name
= (uint8_t *) &ndlp
->nlp_portname
;
198 if (phba
->sli_rev
== LPFC_SLI_REV4
)
199 fcf_inuse
= lpfc_fcf_inuse(phba
);
201 lpfc_debugfs_disc_trc(vport
, LPFC_DISC_TRC_RPORT
,
202 "rport devlosstmo:did:x%x type:x%x id:x%x",
203 ndlp
->nlp_DID
, ndlp
->nlp_type
, rport
->scsi_target_id
);
205 /* Don't defer this if we are in the process of deleting the vport
206 * or unloading the driver. The unload will cleanup the node
207 * appropriately we just need to cleanup the ndlp rport info here.
209 if (vport
->load_flag
& FC_UNLOADING
) {
210 if (ndlp
->nlp_sid
!= NLP_NO_SID
) {
211 /* flush the target */
212 lpfc_sli_abort_iocb(vport
,
213 &phba
->sli
.ring
[phba
->sli
.fcp_ring
],
214 ndlp
->nlp_sid
, 0, LPFC_CTX_TGT
);
216 put_node
= rdata
->pnode
!= NULL
;
217 put_rport
= ndlp
->rport
!= NULL
;
223 put_device(&rport
->dev
);
227 if (ndlp
->nlp_state
== NLP_STE_MAPPED_NODE
) {
228 lpfc_printf_vlog(vport
, KERN_INFO
, LOG_DISCOVERY
,
229 "0284 Devloss timeout Ignored on "
230 "WWPN %x:%x:%x:%x:%x:%x:%x:%x "
232 *name
, *(name
+1), *(name
+2), *(name
+3),
233 *(name
+4), *(name
+5), *(name
+6), *(name
+7),
238 if (ndlp
->nlp_type
& NLP_FABRIC
) {
239 /* We will clean up these Nodes in linkup */
240 put_node
= rdata
->pnode
!= NULL
;
241 put_rport
= ndlp
->rport
!= NULL
;
247 put_device(&rport
->dev
);
251 if (ndlp
->nlp_sid
!= NLP_NO_SID
) {
253 /* flush the target */
254 lpfc_sli_abort_iocb(vport
, &phba
->sli
.ring
[phba
->sli
.fcp_ring
],
255 ndlp
->nlp_sid
, 0, LPFC_CTX_TGT
);
259 lpfc_printf_vlog(vport
, KERN_ERR
, LOG_DISCOVERY
,
260 "0203 Devloss timeout on "
261 "WWPN %02x:%02x:%02x:%02x:%02x:%02x:%02x:%02x "
262 "NPort x%06x Data: x%x x%x x%x\n",
263 *name
, *(name
+1), *(name
+2), *(name
+3),
264 *(name
+4), *(name
+5), *(name
+6), *(name
+7),
265 ndlp
->nlp_DID
, ndlp
->nlp_flag
,
266 ndlp
->nlp_state
, ndlp
->nlp_rpi
);
268 lpfc_printf_vlog(vport
, KERN_INFO
, LOG_DISCOVERY
,
269 "0204 Devloss timeout on "
270 "WWPN %02x:%02x:%02x:%02x:%02x:%02x:%02x:%02x "
271 "NPort x%06x Data: x%x x%x x%x\n",
272 *name
, *(name
+1), *(name
+2), *(name
+3),
273 *(name
+4), *(name
+5), *(name
+6), *(name
+7),
274 ndlp
->nlp_DID
, ndlp
->nlp_flag
,
275 ndlp
->nlp_state
, ndlp
->nlp_rpi
);
278 put_node
= rdata
->pnode
!= NULL
;
279 put_rport
= ndlp
->rport
!= NULL
;
285 put_device(&rport
->dev
);
287 if (!(vport
->load_flag
& FC_UNLOADING
) &&
288 !(ndlp
->nlp_flag
& NLP_DELAY_TMO
) &&
289 !(ndlp
->nlp_flag
& NLP_NPR_2B_DISC
) &&
290 (ndlp
->nlp_state
!= NLP_STE_UNMAPPED_NODE
) &&
291 (ndlp
->nlp_state
!= NLP_STE_REG_LOGIN_ISSUE
) &&
292 (ndlp
->nlp_state
!= NLP_STE_PRLI_ISSUE
))
293 lpfc_disc_state_machine(vport
, ndlp
, NULL
, NLP_EVT_DEVICE_RM
);
299 * lpfc_sli4_post_dev_loss_tmo_handler - SLI4 post devloss timeout handler
300 * @phba: Pointer to hba context object.
301 * @fcf_inuse: SLI4 FCF in-use state reported from devloss timeout handler.
302 * @nlp_did: remote node identifer with devloss timeout.
304 * This function is called from the worker thread after invoking devloss
305 * timeout handler and releasing the reference count for the ndlp with
306 * which the devloss timeout was handled for SLI4 host. For the devloss
307 * timeout of the last remote node which had been in use of FCF, when this
308 * routine is invoked, it shall be guaranteed that none of the remote are
309 * in-use of FCF. When devloss timeout to the last remote using the FCF,
310 * if the FIP engine is neither in FCF table scan process nor roundrobin
311 * failover process, the in-use FCF shall be unregistered. If the FIP
312 * engine is in FCF discovery process, the devloss timeout state shall
313 * be set for either the FCF table scan process or roundrobin failover
314 * process to unregister the in-use FCF.
317 lpfc_sli4_post_dev_loss_tmo_handler(struct lpfc_hba
*phba
, int fcf_inuse
,
320 /* If devloss timeout happened to a remote node when FCF had no
321 * longer been in-use, do nothing.
326 if ((phba
->hba_flag
& HBA_FIP_SUPPORT
) && !lpfc_fcf_inuse(phba
)) {
327 spin_lock_irq(&phba
->hbalock
);
328 if (phba
->fcf
.fcf_flag
& FCF_DISCOVERY
) {
329 if (phba
->hba_flag
& HBA_DEVLOSS_TMO
) {
330 spin_unlock_irq(&phba
->hbalock
);
333 phba
->hba_flag
|= HBA_DEVLOSS_TMO
;
334 lpfc_printf_log(phba
, KERN_INFO
, LOG_FIP
,
335 "2847 Last remote node (x%x) using "
336 "FCF devloss tmo\n", nlp_did
);
338 if (phba
->fcf
.fcf_flag
& FCF_REDISC_PROG
) {
339 spin_unlock_irq(&phba
->hbalock
);
340 lpfc_printf_log(phba
, KERN_INFO
, LOG_FIP
,
341 "2868 Devloss tmo to FCF rediscovery "
345 if (!(phba
->hba_flag
& (FCF_TS_INPROG
| FCF_RR_INPROG
))) {
346 spin_unlock_irq(&phba
->hbalock
);
347 lpfc_printf_log(phba
, KERN_INFO
, LOG_FIP
,
348 "2869 Devloss tmo to idle FIP engine, "
349 "unreg in-use FCF and rescan.\n");
350 /* Unregister in-use FCF and rescan */
351 lpfc_unregister_fcf_rescan(phba
);
354 spin_unlock_irq(&phba
->hbalock
);
355 if (phba
->hba_flag
& FCF_TS_INPROG
)
356 lpfc_printf_log(phba
, KERN_INFO
, LOG_FIP
,
357 "2870 FCF table scan in progress\n");
358 if (phba
->hba_flag
& FCF_RR_INPROG
)
359 lpfc_printf_log(phba
, KERN_INFO
, LOG_FIP
,
360 "2871 FLOGI roundrobin FCF failover "
363 lpfc_unregister_unused_fcf(phba
);
367 * lpfc_alloc_fast_evt - Allocates data structure for posting event
368 * @phba: Pointer to hba context object.
370 * This function is called from the functions which need to post
371 * events from interrupt context. This function allocates data
372 * structure required for posting event. It also keeps track of
373 * number of events pending and prevent event storm when there are
376 struct lpfc_fast_path_event
*
377 lpfc_alloc_fast_evt(struct lpfc_hba
*phba
) {
378 struct lpfc_fast_path_event
*ret
;
380 /* If there are lot of fast event do not exhaust memory due to this */
381 if (atomic_read(&phba
->fast_event_count
) > LPFC_MAX_EVT_COUNT
)
384 ret
= kzalloc(sizeof(struct lpfc_fast_path_event
),
387 atomic_inc(&phba
->fast_event_count
);
388 INIT_LIST_HEAD(&ret
->work_evt
.evt_listp
);
389 ret
->work_evt
.evt
= LPFC_EVT_FASTPATH_MGMT_EVT
;
395 * lpfc_free_fast_evt - Frees event data structure
396 * @phba: Pointer to hba context object.
397 * @evt: Event object which need to be freed.
399 * This function frees the data structure required for posting
403 lpfc_free_fast_evt(struct lpfc_hba
*phba
,
404 struct lpfc_fast_path_event
*evt
) {
406 atomic_dec(&phba
->fast_event_count
);
411 * lpfc_send_fastpath_evt - Posts events generated from fast path
412 * @phba: Pointer to hba context object.
413 * @evtp: Event data structure.
415 * This function is called from worker thread, when the interrupt
416 * context need to post an event. This function posts the event
417 * to fc transport netlink interface.
420 lpfc_send_fastpath_evt(struct lpfc_hba
*phba
,
421 struct lpfc_work_evt
*evtp
)
423 unsigned long evt_category
, evt_sub_category
;
424 struct lpfc_fast_path_event
*fast_evt_data
;
426 uint32_t evt_data_size
;
427 struct Scsi_Host
*shost
;
429 fast_evt_data
= container_of(evtp
, struct lpfc_fast_path_event
,
432 evt_category
= (unsigned long) fast_evt_data
->un
.fabric_evt
.event_type
;
433 evt_sub_category
= (unsigned long) fast_evt_data
->un
.
434 fabric_evt
.subcategory
;
435 shost
= lpfc_shost_from_vport(fast_evt_data
->vport
);
436 if (evt_category
== FC_REG_FABRIC_EVENT
) {
437 if (evt_sub_category
== LPFC_EVENT_FCPRDCHKERR
) {
438 evt_data
= (char *) &fast_evt_data
->un
.read_check_error
;
439 evt_data_size
= sizeof(fast_evt_data
->un
.
441 } else if ((evt_sub_category
== LPFC_EVENT_FABRIC_BUSY
) ||
442 (evt_sub_category
== LPFC_EVENT_PORT_BUSY
)) {
443 evt_data
= (char *) &fast_evt_data
->un
.fabric_evt
;
444 evt_data_size
= sizeof(fast_evt_data
->un
.fabric_evt
);
446 lpfc_free_fast_evt(phba
, fast_evt_data
);
449 } else if (evt_category
== FC_REG_SCSI_EVENT
) {
450 switch (evt_sub_category
) {
451 case LPFC_EVENT_QFULL
:
452 case LPFC_EVENT_DEVBSY
:
453 evt_data
= (char *) &fast_evt_data
->un
.scsi_evt
;
454 evt_data_size
= sizeof(fast_evt_data
->un
.scsi_evt
);
456 case LPFC_EVENT_CHECK_COND
:
457 evt_data
= (char *) &fast_evt_data
->un
.check_cond_evt
;
458 evt_data_size
= sizeof(fast_evt_data
->un
.
461 case LPFC_EVENT_VARQUEDEPTH
:
462 evt_data
= (char *) &fast_evt_data
->un
.queue_depth_evt
;
463 evt_data_size
= sizeof(fast_evt_data
->un
.
467 lpfc_free_fast_evt(phba
, fast_evt_data
);
471 lpfc_free_fast_evt(phba
, fast_evt_data
);
475 fc_host_post_vendor_event(shost
,
476 fc_get_event_number(),
481 lpfc_free_fast_evt(phba
, fast_evt_data
);
486 lpfc_work_list_done(struct lpfc_hba
*phba
)
488 struct lpfc_work_evt
*evtp
= NULL
;
489 struct lpfc_nodelist
*ndlp
;
494 spin_lock_irq(&phba
->hbalock
);
495 while (!list_empty(&phba
->work_list
)) {
496 list_remove_head((&phba
->work_list
), evtp
, typeof(*evtp
),
498 spin_unlock_irq(&phba
->hbalock
);
501 case LPFC_EVT_ELS_RETRY
:
502 ndlp
= (struct lpfc_nodelist
*) (evtp
->evt_arg1
);
503 lpfc_els_retry_delay_handler(ndlp
);
504 free_evt
= 0; /* evt is part of ndlp */
505 /* decrement the node reference count held
506 * for this queued work
510 case LPFC_EVT_DEV_LOSS
:
511 ndlp
= (struct lpfc_nodelist
*)(evtp
->evt_arg1
);
512 fcf_inuse
= lpfc_dev_loss_tmo_handler(ndlp
);
514 /* decrement the node reference count held for
517 nlp_did
= ndlp
->nlp_DID
;
519 if (phba
->sli_rev
== LPFC_SLI_REV4
)
520 lpfc_sli4_post_dev_loss_tmo_handler(phba
,
524 case LPFC_EVT_ONLINE
:
525 if (phba
->link_state
< LPFC_LINK_DOWN
)
526 *(int *) (evtp
->evt_arg1
) = lpfc_online(phba
);
528 *(int *) (evtp
->evt_arg1
) = 0;
529 complete((struct completion
*)(evtp
->evt_arg2
));
531 case LPFC_EVT_OFFLINE_PREP
:
532 if (phba
->link_state
>= LPFC_LINK_DOWN
)
533 lpfc_offline_prep(phba
);
534 *(int *)(evtp
->evt_arg1
) = 0;
535 complete((struct completion
*)(evtp
->evt_arg2
));
537 case LPFC_EVT_OFFLINE
:
539 lpfc_sli_brdrestart(phba
);
540 *(int *)(evtp
->evt_arg1
) =
541 lpfc_sli_brdready(phba
, HS_FFRDY
| HS_MBRDY
);
542 lpfc_unblock_mgmt_io(phba
);
543 complete((struct completion
*)(evtp
->evt_arg2
));
545 case LPFC_EVT_WARM_START
:
547 lpfc_reset_barrier(phba
);
548 lpfc_sli_brdreset(phba
);
549 lpfc_hba_down_post(phba
);
550 *(int *)(evtp
->evt_arg1
) =
551 lpfc_sli_brdready(phba
, HS_MBRDY
);
552 lpfc_unblock_mgmt_io(phba
);
553 complete((struct completion
*)(evtp
->evt_arg2
));
557 *(int *)(evtp
->evt_arg1
)
558 = (phba
->pport
->stopped
)
559 ? 0 : lpfc_sli_brdkill(phba
);
560 lpfc_unblock_mgmt_io(phba
);
561 complete((struct completion
*)(evtp
->evt_arg2
));
563 case LPFC_EVT_FASTPATH_MGMT_EVT
:
564 lpfc_send_fastpath_evt(phba
, evtp
);
567 case LPFC_EVT_RESET_HBA
:
568 if (!(phba
->pport
->load_flag
& FC_UNLOADING
))
569 lpfc_reset_hba(phba
);
574 spin_lock_irq(&phba
->hbalock
);
576 spin_unlock_irq(&phba
->hbalock
);
581 lpfc_work_done(struct lpfc_hba
*phba
)
583 struct lpfc_sli_ring
*pring
;
584 uint32_t ha_copy
, status
, control
, work_port_events
;
585 struct lpfc_vport
**vports
;
586 struct lpfc_vport
*vport
;
589 spin_lock_irq(&phba
->hbalock
);
590 ha_copy
= phba
->work_ha
;
592 spin_unlock_irq(&phba
->hbalock
);
594 /* First, try to post the next mailbox command to SLI4 device */
595 if (phba
->pci_dev_grp
== LPFC_PCI_DEV_OC
)
596 lpfc_sli4_post_async_mbox(phba
);
598 if (ha_copy
& HA_ERATT
)
599 /* Handle the error attention event */
600 lpfc_handle_eratt(phba
);
602 if (ha_copy
& HA_MBATT
)
603 lpfc_sli_handle_mb_event(phba
);
605 if (ha_copy
& HA_LATT
)
606 lpfc_handle_latt(phba
);
608 /* Process SLI4 events */
609 if (phba
->pci_dev_grp
== LPFC_PCI_DEV_OC
) {
610 if (phba
->hba_flag
& HBA_RRQ_ACTIVE
)
611 lpfc_handle_rrq_active(phba
);
612 if (phba
->hba_flag
& FCP_XRI_ABORT_EVENT
)
613 lpfc_sli4_fcp_xri_abort_event_proc(phba
);
614 if (phba
->hba_flag
& ELS_XRI_ABORT_EVENT
)
615 lpfc_sli4_els_xri_abort_event_proc(phba
);
616 if (phba
->hba_flag
& ASYNC_EVENT
)
617 lpfc_sli4_async_event_proc(phba
);
618 if (phba
->hba_flag
& HBA_POST_RECEIVE_BUFFER
) {
619 spin_lock_irq(&phba
->hbalock
);
620 phba
->hba_flag
&= ~HBA_POST_RECEIVE_BUFFER
;
621 spin_unlock_irq(&phba
->hbalock
);
622 lpfc_sli_hbqbuf_add_hbqs(phba
, LPFC_ELS_HBQ
);
624 if (phba
->fcf
.fcf_flag
& FCF_REDISC_EVT
)
625 lpfc_sli4_fcf_redisc_event_proc(phba
);
628 vports
= lpfc_create_vport_work_array(phba
);
630 for (i
= 0; i
<= phba
->max_vports
; i
++) {
632 * We could have no vports in array if unloading, so if
633 * this happens then just use the pport
635 if (vports
[i
] == NULL
&& i
== 0)
641 spin_lock_irq(&vport
->work_port_lock
);
642 work_port_events
= vport
->work_port_events
;
643 vport
->work_port_events
&= ~work_port_events
;
644 spin_unlock_irq(&vport
->work_port_lock
);
645 if (work_port_events
& WORKER_DISC_TMO
)
646 lpfc_disc_timeout_handler(vport
);
647 if (work_port_events
& WORKER_ELS_TMO
)
648 lpfc_els_timeout_handler(vport
);
649 if (work_port_events
& WORKER_HB_TMO
)
650 lpfc_hb_timeout_handler(phba
);
651 if (work_port_events
& WORKER_MBOX_TMO
)
652 lpfc_mbox_timeout_handler(phba
);
653 if (work_port_events
& WORKER_FABRIC_BLOCK_TMO
)
654 lpfc_unblock_fabric_iocbs(phba
);
655 if (work_port_events
& WORKER_FDMI_TMO
)
656 lpfc_fdmi_timeout_handler(vport
);
657 if (work_port_events
& WORKER_RAMP_DOWN_QUEUE
)
658 lpfc_ramp_down_queue_handler(phba
);
659 if (work_port_events
& WORKER_RAMP_UP_QUEUE
)
660 lpfc_ramp_up_queue_handler(phba
);
661 if (work_port_events
& WORKER_DELAYED_DISC_TMO
)
662 lpfc_delayed_disc_timeout_handler(vport
);
664 lpfc_destroy_vport_work_array(phba
, vports
);
666 pring
= &phba
->sli
.ring
[LPFC_ELS_RING
];
667 status
= (ha_copy
& (HA_RXMASK
<< (4*LPFC_ELS_RING
)));
668 status
>>= (4*LPFC_ELS_RING
);
669 if ((status
& HA_RXMASK
) ||
670 (pring
->flag
& LPFC_DEFERRED_RING_EVENT
) ||
671 (phba
->hba_flag
& HBA_SP_QUEUE_EVT
)) {
672 if (pring
->flag
& LPFC_STOP_IOCB_EVENT
) {
673 pring
->flag
|= LPFC_DEFERRED_RING_EVENT
;
674 /* Set the lpfc data pending flag */
675 set_bit(LPFC_DATA_READY
, &phba
->data_flags
);
677 pring
->flag
&= ~LPFC_DEFERRED_RING_EVENT
;
678 lpfc_sli_handle_slow_ring_event(phba
, pring
,
682 if ((phba
->sli_rev
== LPFC_SLI_REV4
) && pring
->txq_cnt
)
683 lpfc_drain_txq(phba
);
685 * Turn on Ring interrupts
687 if (phba
->sli_rev
<= LPFC_SLI_REV3
) {
688 spin_lock_irq(&phba
->hbalock
);
689 control
= readl(phba
->HCregaddr
);
690 if (!(control
& (HC_R0INT_ENA
<< LPFC_ELS_RING
))) {
691 lpfc_debugfs_slow_ring_trc(phba
,
692 "WRK Enable ring: cntl:x%x hacopy:x%x",
693 control
, ha_copy
, 0);
695 control
|= (HC_R0INT_ENA
<< LPFC_ELS_RING
);
696 writel(control
, phba
->HCregaddr
);
697 readl(phba
->HCregaddr
); /* flush */
699 lpfc_debugfs_slow_ring_trc(phba
,
700 "WRK Ring ok: cntl:x%x hacopy:x%x",
701 control
, ha_copy
, 0);
703 spin_unlock_irq(&phba
->hbalock
);
706 lpfc_work_list_done(phba
);
710 lpfc_do_work(void *p
)
712 struct lpfc_hba
*phba
= p
;
715 set_user_nice(current
, -20);
716 phba
->data_flags
= 0;
718 while (!kthread_should_stop()) {
719 /* wait and check worker queue activities */
720 rc
= wait_event_interruptible(phba
->work_waitq
,
721 (test_and_clear_bit(LPFC_DATA_READY
,
723 || kthread_should_stop()));
724 /* Signal wakeup shall terminate the worker thread */
726 lpfc_printf_log(phba
, KERN_ERR
, LOG_ELS
,
727 "0433 Wakeup on signal: rc=x%x\n", rc
);
731 /* Attend pending lpfc data processing */
732 lpfc_work_done(phba
);
734 phba
->worker_thread
= NULL
;
735 lpfc_printf_log(phba
, KERN_INFO
, LOG_ELS
,
736 "0432 Worker thread stopped.\n");
741 * This is only called to handle FC worker events. Since this a rare
742 * occurrence, we allocate a struct lpfc_work_evt structure here instead of
743 * embedding it in the IOCB.
746 lpfc_workq_post_event(struct lpfc_hba
*phba
, void *arg1
, void *arg2
,
749 struct lpfc_work_evt
*evtp
;
753 * All Mailbox completions and LPFC_ELS_RING rcv ring IOCB events will
754 * be queued to worker thread for processing
756 evtp
= kmalloc(sizeof(struct lpfc_work_evt
), GFP_ATOMIC
);
760 evtp
->evt_arg1
= arg1
;
761 evtp
->evt_arg2
= arg2
;
764 spin_lock_irqsave(&phba
->hbalock
, flags
);
765 list_add_tail(&evtp
->evt_listp
, &phba
->work_list
);
766 spin_unlock_irqrestore(&phba
->hbalock
, flags
);
768 lpfc_worker_wake_up(phba
);
774 lpfc_cleanup_rpis(struct lpfc_vport
*vport
, int remove
)
776 struct Scsi_Host
*shost
= lpfc_shost_from_vport(vport
);
777 struct lpfc_hba
*phba
= vport
->phba
;
778 struct lpfc_nodelist
*ndlp
, *next_ndlp
;
781 list_for_each_entry_safe(ndlp
, next_ndlp
, &vport
->fc_nodes
, nlp_listp
) {
782 if (!NLP_CHK_NODE_ACT(ndlp
))
784 if (ndlp
->nlp_state
== NLP_STE_UNUSED_NODE
)
786 if ((phba
->sli3_options
& LPFC_SLI3_VPORT_TEARDOWN
) ||
787 ((vport
->port_type
== LPFC_NPIV_PORT
) &&
788 (ndlp
->nlp_DID
== NameServer_DID
)))
789 lpfc_unreg_rpi(vport
, ndlp
);
791 /* Leave Fabric nodes alone on link down */
792 if ((phba
->sli_rev
< LPFC_SLI_REV4
) &&
793 (!remove
&& ndlp
->nlp_type
& NLP_FABRIC
))
795 rc
= lpfc_disc_state_machine(vport
, ndlp
, NULL
,
798 : NLP_EVT_DEVICE_RECOVERY
);
800 if (phba
->sli3_options
& LPFC_SLI3_VPORT_TEARDOWN
) {
801 if (phba
->sli_rev
== LPFC_SLI_REV4
)
802 lpfc_sli4_unreg_all_rpis(vport
);
803 lpfc_mbx_unreg_vpi(vport
);
804 spin_lock_irq(shost
->host_lock
);
805 vport
->fc_flag
|= FC_VPORT_NEEDS_REG_VPI
;
806 spin_unlock_irq(shost
->host_lock
);
811 lpfc_port_link_failure(struct lpfc_vport
*vport
)
813 lpfc_vport_set_state(vport
, FC_VPORT_LINKDOWN
);
815 /* Cleanup any outstanding received buffers */
816 lpfc_cleanup_rcv_buffers(vport
);
818 /* Cleanup any outstanding RSCN activity */
819 lpfc_els_flush_rscn(vport
);
821 /* Cleanup any outstanding ELS commands */
822 lpfc_els_flush_cmd(vport
);
824 lpfc_cleanup_rpis(vport
, 0);
826 /* Turn off discovery timer if its running */
827 lpfc_can_disctmo(vport
);
831 lpfc_linkdown_port(struct lpfc_vport
*vport
)
833 struct Scsi_Host
*shost
= lpfc_shost_from_vport(vport
);
835 fc_host_post_event(shost
, fc_get_event_number(), FCH_EVT_LINKDOWN
, 0);
837 lpfc_debugfs_disc_trc(vport
, LPFC_DISC_TRC_ELS_CMD
,
838 "Link Down: state:x%x rtry:x%x flg:x%x",
839 vport
->port_state
, vport
->fc_ns_retry
, vport
->fc_flag
);
841 lpfc_port_link_failure(vport
);
843 /* Stop delayed Nport discovery */
844 spin_lock_irq(shost
->host_lock
);
845 vport
->fc_flag
&= ~FC_DISC_DELAYED
;
846 spin_unlock_irq(shost
->host_lock
);
847 del_timer_sync(&vport
->delayed_disc_tmo
);
851 lpfc_linkdown(struct lpfc_hba
*phba
)
853 struct lpfc_vport
*vport
= phba
->pport
;
854 struct Scsi_Host
*shost
= lpfc_shost_from_vport(vport
);
855 struct lpfc_vport
**vports
;
859 if (phba
->link_state
== LPFC_LINK_DOWN
)
862 /* Block all SCSI stack I/Os */
863 lpfc_scsi_dev_block(phba
);
865 spin_lock_irq(&phba
->hbalock
);
866 phba
->fcf
.fcf_flag
&= ~(FCF_AVAILABLE
| FCF_SCAN_DONE
);
867 spin_unlock_irq(&phba
->hbalock
);
868 if (phba
->link_state
> LPFC_LINK_DOWN
) {
869 phba
->link_state
= LPFC_LINK_DOWN
;
870 spin_lock_irq(shost
->host_lock
);
871 phba
->pport
->fc_flag
&= ~FC_LBIT
;
872 spin_unlock_irq(shost
->host_lock
);
874 vports
= lpfc_create_vport_work_array(phba
);
876 for (i
= 0; i
<= phba
->max_vports
&& vports
[i
] != NULL
; i
++) {
877 /* Issue a LINK DOWN event to all nodes */
878 lpfc_linkdown_port(vports
[i
]);
880 lpfc_destroy_vport_work_array(phba
, vports
);
881 /* Clean up any firmware default rpi's */
882 mb
= mempool_alloc(phba
->mbox_mem_pool
, GFP_KERNEL
);
884 lpfc_unreg_did(phba
, 0xffff, LPFC_UNREG_ALL_DFLT_RPIS
, mb
);
886 mb
->mbox_cmpl
= lpfc_sli_def_mbox_cmpl
;
887 if (lpfc_sli_issue_mbox(phba
, mb
, MBX_NOWAIT
)
888 == MBX_NOT_FINISHED
) {
889 mempool_free(mb
, phba
->mbox_mem_pool
);
893 /* Setup myDID for link up if we are in pt2pt mode */
894 if (phba
->pport
->fc_flag
& FC_PT2PT
) {
895 phba
->pport
->fc_myDID
= 0;
896 mb
= mempool_alloc(phba
->mbox_mem_pool
, GFP_KERNEL
);
898 lpfc_config_link(phba
, mb
);
899 mb
->mbox_cmpl
= lpfc_sli_def_mbox_cmpl
;
901 if (lpfc_sli_issue_mbox(phba
, mb
, MBX_NOWAIT
)
902 == MBX_NOT_FINISHED
) {
903 mempool_free(mb
, phba
->mbox_mem_pool
);
906 spin_lock_irq(shost
->host_lock
);
907 phba
->pport
->fc_flag
&= ~(FC_PT2PT
| FC_PT2PT_PLOGI
);
908 spin_unlock_irq(shost
->host_lock
);
915 lpfc_linkup_cleanup_nodes(struct lpfc_vport
*vport
)
917 struct lpfc_nodelist
*ndlp
;
919 list_for_each_entry(ndlp
, &vport
->fc_nodes
, nlp_listp
) {
920 if (!NLP_CHK_NODE_ACT(ndlp
))
922 if (ndlp
->nlp_state
== NLP_STE_UNUSED_NODE
)
924 if (ndlp
->nlp_type
& NLP_FABRIC
) {
925 /* On Linkup its safe to clean up the ndlp
926 * from Fabric connections.
928 if (ndlp
->nlp_DID
!= Fabric_DID
)
929 lpfc_unreg_rpi(vport
, ndlp
);
930 lpfc_nlp_set_state(vport
, ndlp
, NLP_STE_NPR_NODE
);
931 } else if (!(ndlp
->nlp_flag
& NLP_NPR_ADISC
)) {
932 /* Fail outstanding IO now since device is
935 lpfc_unreg_rpi(vport
, ndlp
);
941 lpfc_linkup_port(struct lpfc_vport
*vport
)
943 struct Scsi_Host
*shost
= lpfc_shost_from_vport(vport
);
944 struct lpfc_hba
*phba
= vport
->phba
;
946 if ((vport
->load_flag
& FC_UNLOADING
) != 0)
949 lpfc_debugfs_disc_trc(vport
, LPFC_DISC_TRC_ELS_CMD
,
950 "Link Up: top:x%x speed:x%x flg:x%x",
951 phba
->fc_topology
, phba
->fc_linkspeed
, phba
->link_flag
);
953 /* If NPIV is not enabled, only bring the physical port up */
954 if (!(phba
->sli3_options
& LPFC_SLI3_NPIV_ENABLED
) &&
955 (vport
!= phba
->pport
))
958 fc_host_post_event(shost
, fc_get_event_number(), FCH_EVT_LINKUP
, 0);
960 spin_lock_irq(shost
->host_lock
);
961 vport
->fc_flag
&= ~(FC_PT2PT
| FC_PT2PT_PLOGI
| FC_ABORT_DISCOVERY
|
962 FC_RSCN_MODE
| FC_NLP_MORE
| FC_RSCN_DISCOVERY
);
963 vport
->fc_flag
|= FC_NDISC_ACTIVE
;
964 vport
->fc_ns_retry
= 0;
965 spin_unlock_irq(shost
->host_lock
);
967 if (vport
->fc_flag
& FC_LBIT
)
968 lpfc_linkup_cleanup_nodes(vport
);
973 lpfc_linkup(struct lpfc_hba
*phba
)
975 struct lpfc_vport
**vports
;
978 lpfc_cleanup_wt_rrqs(phba
);
979 phba
->link_state
= LPFC_LINK_UP
;
981 /* Unblock fabric iocbs if they are blocked */
982 clear_bit(FABRIC_COMANDS_BLOCKED
, &phba
->bit_flags
);
983 del_timer_sync(&phba
->fabric_block_timer
);
985 vports
= lpfc_create_vport_work_array(phba
);
987 for (i
= 0; i
<= phba
->max_vports
&& vports
[i
] != NULL
; i
++)
988 lpfc_linkup_port(vports
[i
]);
989 lpfc_destroy_vport_work_array(phba
, vports
);
990 if ((phba
->sli3_options
& LPFC_SLI3_NPIV_ENABLED
) &&
991 (phba
->sli_rev
< LPFC_SLI_REV4
))
992 lpfc_issue_clear_la(phba
, phba
->pport
);
998 * This routine handles processing a CLEAR_LA mailbox
999 * command upon completion. It is setup in the LPFC_MBOXQ
1000 * as the completion routine when the command is
1001 * handed off to the SLI layer.
1004 lpfc_mbx_cmpl_clear_la(struct lpfc_hba
*phba
, LPFC_MBOXQ_t
*pmb
)
1006 struct lpfc_vport
*vport
= pmb
->vport
;
1007 struct Scsi_Host
*shost
= lpfc_shost_from_vport(vport
);
1008 struct lpfc_sli
*psli
= &phba
->sli
;
1009 MAILBOX_t
*mb
= &pmb
->u
.mb
;
1012 /* Since we don't do discovery right now, turn these off here */
1013 psli
->ring
[psli
->extra_ring
].flag
&= ~LPFC_STOP_IOCB_EVENT
;
1014 psli
->ring
[psli
->fcp_ring
].flag
&= ~LPFC_STOP_IOCB_EVENT
;
1015 psli
->ring
[psli
->next_ring
].flag
&= ~LPFC_STOP_IOCB_EVENT
;
1017 /* Check for error */
1018 if ((mb
->mbxStatus
) && (mb
->mbxStatus
!= 0x1601)) {
1019 /* CLEAR_LA mbox error <mbxStatus> state <hba_state> */
1020 lpfc_printf_vlog(vport
, KERN_ERR
, LOG_MBOX
,
1021 "0320 CLEAR_LA mbxStatus error x%x hba "
1023 mb
->mbxStatus
, vport
->port_state
);
1024 phba
->link_state
= LPFC_HBA_ERROR
;
1028 if (vport
->port_type
== LPFC_PHYSICAL_PORT
)
1029 phba
->link_state
= LPFC_HBA_READY
;
1031 spin_lock_irq(&phba
->hbalock
);
1032 psli
->sli_flag
|= LPFC_PROCESS_LA
;
1033 control
= readl(phba
->HCregaddr
);
1034 control
|= HC_LAINT_ENA
;
1035 writel(control
, phba
->HCregaddr
);
1036 readl(phba
->HCregaddr
); /* flush */
1037 spin_unlock_irq(&phba
->hbalock
);
1038 mempool_free(pmb
, phba
->mbox_mem_pool
);
1042 /* Device Discovery completes */
1043 lpfc_printf_vlog(vport
, KERN_INFO
, LOG_DISCOVERY
,
1044 "0225 Device Discovery completes\n");
1045 mempool_free(pmb
, phba
->mbox_mem_pool
);
1047 spin_lock_irq(shost
->host_lock
);
1048 vport
->fc_flag
&= ~FC_ABORT_DISCOVERY
;
1049 spin_unlock_irq(shost
->host_lock
);
1051 lpfc_can_disctmo(vport
);
1053 /* turn on Link Attention interrupts */
1055 spin_lock_irq(&phba
->hbalock
);
1056 psli
->sli_flag
|= LPFC_PROCESS_LA
;
1057 control
= readl(phba
->HCregaddr
);
1058 control
|= HC_LAINT_ENA
;
1059 writel(control
, phba
->HCregaddr
);
1060 readl(phba
->HCregaddr
); /* flush */
1061 spin_unlock_irq(&phba
->hbalock
);
1068 lpfc_mbx_cmpl_local_config_link(struct lpfc_hba
*phba
, LPFC_MBOXQ_t
*pmb
)
1070 struct lpfc_vport
*vport
= pmb
->vport
;
1072 if (pmb
->u
.mb
.mbxStatus
)
1075 mempool_free(pmb
, phba
->mbox_mem_pool
);
1077 if (phba
->fc_topology
== LPFC_TOPOLOGY_LOOP
&&
1078 vport
->fc_flag
& FC_PUBLIC_LOOP
&&
1079 !(vport
->fc_flag
& FC_LBIT
)) {
1080 /* Need to wait for FAN - use discovery timer
1081 * for timeout. port_state is identically
1082 * LPFC_LOCAL_CFG_LINK while waiting for FAN
1084 lpfc_set_disctmo(vport
);
1088 /* Start discovery by sending a FLOGI. port_state is identically
1089 * LPFC_FLOGI while waiting for FLOGI cmpl
1091 if (vport
->port_state
!= LPFC_FLOGI
)
1092 lpfc_initial_flogi(vport
);
1096 lpfc_printf_vlog(vport
, KERN_ERR
, LOG_MBOX
,
1097 "0306 CONFIG_LINK mbxStatus error x%x "
1099 pmb
->u
.mb
.mbxStatus
, vport
->port_state
);
1100 mempool_free(pmb
, phba
->mbox_mem_pool
);
1102 lpfc_linkdown(phba
);
1104 lpfc_printf_vlog(vport
, KERN_ERR
, LOG_DISCOVERY
,
1105 "0200 CONFIG_LINK bad hba state x%x\n",
1108 lpfc_issue_clear_la(phba
, vport
);
1113 * lpfc_sli4_clear_fcf_rr_bmask
1114 * @phba pointer to the struct lpfc_hba for this port.
1115 * This fucnction resets the round robin bit mask and clears the
1116 * fcf priority list. The list deletions are done while holding the
1117 * hbalock. The ON_LIST flag and the FLOGI_FAILED flags are cleared
1118 * from the lpfc_fcf_pri record.
1121 lpfc_sli4_clear_fcf_rr_bmask(struct lpfc_hba
*phba
)
1123 struct lpfc_fcf_pri
*fcf_pri
;
1124 struct lpfc_fcf_pri
*next_fcf_pri
;
1125 memset(phba
->fcf
.fcf_rr_bmask
, 0, sizeof(*phba
->fcf
.fcf_rr_bmask
));
1126 spin_lock_irq(&phba
->hbalock
);
1127 list_for_each_entry_safe(fcf_pri
, next_fcf_pri
,
1128 &phba
->fcf
.fcf_pri_list
, list
) {
1129 list_del_init(&fcf_pri
->list
);
1130 fcf_pri
->fcf_rec
.flag
= 0;
1132 spin_unlock_irq(&phba
->hbalock
);
1135 lpfc_mbx_cmpl_reg_fcfi(struct lpfc_hba
*phba
, LPFC_MBOXQ_t
*mboxq
)
1137 struct lpfc_vport
*vport
= mboxq
->vport
;
1139 if (mboxq
->u
.mb
.mbxStatus
) {
1140 lpfc_printf_vlog(vport
, KERN_ERR
, LOG_MBOX
,
1141 "2017 REG_FCFI mbxStatus error x%x "
1143 mboxq
->u
.mb
.mbxStatus
, vport
->port_state
);
1147 /* Start FCoE discovery by sending a FLOGI. */
1148 phba
->fcf
.fcfi
= bf_get(lpfc_reg_fcfi_fcfi
, &mboxq
->u
.mqe
.un
.reg_fcfi
);
1149 /* Set the FCFI registered flag */
1150 spin_lock_irq(&phba
->hbalock
);
1151 phba
->fcf
.fcf_flag
|= FCF_REGISTERED
;
1152 spin_unlock_irq(&phba
->hbalock
);
1154 /* If there is a pending FCoE event, restart FCF table scan. */
1155 if ((!(phba
->hba_flag
& FCF_RR_INPROG
)) &&
1156 lpfc_check_pending_fcoe_event(phba
, LPFC_UNREG_FCF
))
1159 /* Mark successful completion of FCF table scan */
1160 spin_lock_irq(&phba
->hbalock
);
1161 phba
->fcf
.fcf_flag
|= (FCF_SCAN_DONE
| FCF_IN_USE
);
1162 phba
->hba_flag
&= ~FCF_TS_INPROG
;
1163 if (vport
->port_state
!= LPFC_FLOGI
) {
1164 phba
->hba_flag
|= FCF_RR_INPROG
;
1165 spin_unlock_irq(&phba
->hbalock
);
1166 lpfc_issue_init_vfi(vport
);
1169 spin_unlock_irq(&phba
->hbalock
);
1173 spin_lock_irq(&phba
->hbalock
);
1174 phba
->hba_flag
&= ~FCF_RR_INPROG
;
1175 spin_unlock_irq(&phba
->hbalock
);
1177 mempool_free(mboxq
, phba
->mbox_mem_pool
);
1181 * lpfc_fab_name_match - Check if the fcf fabric name match.
1182 * @fab_name: pointer to fabric name.
1183 * @new_fcf_record: pointer to fcf record.
1185 * This routine compare the fcf record's fabric name with provided
1186 * fabric name. If the fabric name are identical this function
1187 * returns 1 else return 0.
1190 lpfc_fab_name_match(uint8_t *fab_name
, struct fcf_record
*new_fcf_record
)
1192 if (fab_name
[0] != bf_get(lpfc_fcf_record_fab_name_0
, new_fcf_record
))
1194 if (fab_name
[1] != bf_get(lpfc_fcf_record_fab_name_1
, new_fcf_record
))
1196 if (fab_name
[2] != bf_get(lpfc_fcf_record_fab_name_2
, new_fcf_record
))
1198 if (fab_name
[3] != bf_get(lpfc_fcf_record_fab_name_3
, new_fcf_record
))
1200 if (fab_name
[4] != bf_get(lpfc_fcf_record_fab_name_4
, new_fcf_record
))
1202 if (fab_name
[5] != bf_get(lpfc_fcf_record_fab_name_5
, new_fcf_record
))
1204 if (fab_name
[6] != bf_get(lpfc_fcf_record_fab_name_6
, new_fcf_record
))
1206 if (fab_name
[7] != bf_get(lpfc_fcf_record_fab_name_7
, new_fcf_record
))
1212 * lpfc_sw_name_match - Check if the fcf switch name match.
1213 * @fab_name: pointer to fabric name.
1214 * @new_fcf_record: pointer to fcf record.
1216 * This routine compare the fcf record's switch name with provided
1217 * switch name. If the switch name are identical this function
1218 * returns 1 else return 0.
1221 lpfc_sw_name_match(uint8_t *sw_name
, struct fcf_record
*new_fcf_record
)
1223 if (sw_name
[0] != bf_get(lpfc_fcf_record_switch_name_0
, new_fcf_record
))
1225 if (sw_name
[1] != bf_get(lpfc_fcf_record_switch_name_1
, new_fcf_record
))
1227 if (sw_name
[2] != bf_get(lpfc_fcf_record_switch_name_2
, new_fcf_record
))
1229 if (sw_name
[3] != bf_get(lpfc_fcf_record_switch_name_3
, new_fcf_record
))
1231 if (sw_name
[4] != bf_get(lpfc_fcf_record_switch_name_4
, new_fcf_record
))
1233 if (sw_name
[5] != bf_get(lpfc_fcf_record_switch_name_5
, new_fcf_record
))
1235 if (sw_name
[6] != bf_get(lpfc_fcf_record_switch_name_6
, new_fcf_record
))
1237 if (sw_name
[7] != bf_get(lpfc_fcf_record_switch_name_7
, new_fcf_record
))
1243 * lpfc_mac_addr_match - Check if the fcf mac address match.
1244 * @mac_addr: pointer to mac address.
1245 * @new_fcf_record: pointer to fcf record.
1247 * This routine compare the fcf record's mac address with HBA's
1248 * FCF mac address. If the mac addresses are identical this function
1249 * returns 1 else return 0.
1252 lpfc_mac_addr_match(uint8_t *mac_addr
, struct fcf_record
*new_fcf_record
)
1254 if (mac_addr
[0] != bf_get(lpfc_fcf_record_mac_0
, new_fcf_record
))
1256 if (mac_addr
[1] != bf_get(lpfc_fcf_record_mac_1
, new_fcf_record
))
1258 if (mac_addr
[2] != bf_get(lpfc_fcf_record_mac_2
, new_fcf_record
))
1260 if (mac_addr
[3] != bf_get(lpfc_fcf_record_mac_3
, new_fcf_record
))
1262 if (mac_addr
[4] != bf_get(lpfc_fcf_record_mac_4
, new_fcf_record
))
1264 if (mac_addr
[5] != bf_get(lpfc_fcf_record_mac_5
, new_fcf_record
))
1270 lpfc_vlan_id_match(uint16_t curr_vlan_id
, uint16_t new_vlan_id
)
1272 return (curr_vlan_id
== new_vlan_id
);
1276 * lpfc_update_fcf_record - Update driver fcf record
1277 * __lpfc_update_fcf_record_pri - update the lpfc_fcf_pri record.
1278 * @phba: pointer to lpfc hba data structure.
1279 * @fcf_index: Index for the lpfc_fcf_record.
1280 * @new_fcf_record: pointer to hba fcf record.
1282 * This routine updates the driver FCF priority record from the new HBA FCF
1283 * record. This routine is called with the host lock held.
1286 __lpfc_update_fcf_record_pri(struct lpfc_hba
*phba
, uint16_t fcf_index
,
1287 struct fcf_record
*new_fcf_record
1290 struct lpfc_fcf_pri
*fcf_pri
;
1292 fcf_pri
= &phba
->fcf
.fcf_pri
[fcf_index
];
1293 fcf_pri
->fcf_rec
.fcf_index
= fcf_index
;
1294 /* FCF record priority */
1295 fcf_pri
->fcf_rec
.priority
= new_fcf_record
->fip_priority
;
1300 * lpfc_copy_fcf_record - Copy fcf information to lpfc_hba.
1301 * @fcf: pointer to driver fcf record.
1302 * @new_fcf_record: pointer to fcf record.
1304 * This routine copies the FCF information from the FCF
1305 * record to lpfc_hba data structure.
1308 lpfc_copy_fcf_record(struct lpfc_fcf_rec
*fcf_rec
,
1309 struct fcf_record
*new_fcf_record
)
1312 fcf_rec
->fabric_name
[0] =
1313 bf_get(lpfc_fcf_record_fab_name_0
, new_fcf_record
);
1314 fcf_rec
->fabric_name
[1] =
1315 bf_get(lpfc_fcf_record_fab_name_1
, new_fcf_record
);
1316 fcf_rec
->fabric_name
[2] =
1317 bf_get(lpfc_fcf_record_fab_name_2
, new_fcf_record
);
1318 fcf_rec
->fabric_name
[3] =
1319 bf_get(lpfc_fcf_record_fab_name_3
, new_fcf_record
);
1320 fcf_rec
->fabric_name
[4] =
1321 bf_get(lpfc_fcf_record_fab_name_4
, new_fcf_record
);
1322 fcf_rec
->fabric_name
[5] =
1323 bf_get(lpfc_fcf_record_fab_name_5
, new_fcf_record
);
1324 fcf_rec
->fabric_name
[6] =
1325 bf_get(lpfc_fcf_record_fab_name_6
, new_fcf_record
);
1326 fcf_rec
->fabric_name
[7] =
1327 bf_get(lpfc_fcf_record_fab_name_7
, new_fcf_record
);
1329 fcf_rec
->mac_addr
[0] = bf_get(lpfc_fcf_record_mac_0
, new_fcf_record
);
1330 fcf_rec
->mac_addr
[1] = bf_get(lpfc_fcf_record_mac_1
, new_fcf_record
);
1331 fcf_rec
->mac_addr
[2] = bf_get(lpfc_fcf_record_mac_2
, new_fcf_record
);
1332 fcf_rec
->mac_addr
[3] = bf_get(lpfc_fcf_record_mac_3
, new_fcf_record
);
1333 fcf_rec
->mac_addr
[4] = bf_get(lpfc_fcf_record_mac_4
, new_fcf_record
);
1334 fcf_rec
->mac_addr
[5] = bf_get(lpfc_fcf_record_mac_5
, new_fcf_record
);
1335 /* FCF record index */
1336 fcf_rec
->fcf_indx
= bf_get(lpfc_fcf_record_fcf_index
, new_fcf_record
);
1337 /* FCF record priority */
1338 fcf_rec
->priority
= new_fcf_record
->fip_priority
;
1340 fcf_rec
->switch_name
[0] =
1341 bf_get(lpfc_fcf_record_switch_name_0
, new_fcf_record
);
1342 fcf_rec
->switch_name
[1] =
1343 bf_get(lpfc_fcf_record_switch_name_1
, new_fcf_record
);
1344 fcf_rec
->switch_name
[2] =
1345 bf_get(lpfc_fcf_record_switch_name_2
, new_fcf_record
);
1346 fcf_rec
->switch_name
[3] =
1347 bf_get(lpfc_fcf_record_switch_name_3
, new_fcf_record
);
1348 fcf_rec
->switch_name
[4] =
1349 bf_get(lpfc_fcf_record_switch_name_4
, new_fcf_record
);
1350 fcf_rec
->switch_name
[5] =
1351 bf_get(lpfc_fcf_record_switch_name_5
, new_fcf_record
);
1352 fcf_rec
->switch_name
[6] =
1353 bf_get(lpfc_fcf_record_switch_name_6
, new_fcf_record
);
1354 fcf_rec
->switch_name
[7] =
1355 bf_get(lpfc_fcf_record_switch_name_7
, new_fcf_record
);
1359 * lpfc_update_fcf_record - Update driver fcf record
1360 * @phba: pointer to lpfc hba data structure.
1361 * @fcf_rec: pointer to driver fcf record.
1362 * @new_fcf_record: pointer to hba fcf record.
1363 * @addr_mode: address mode to be set to the driver fcf record.
1364 * @vlan_id: vlan tag to be set to the driver fcf record.
1365 * @flag: flag bits to be set to the driver fcf record.
1367 * This routine updates the driver FCF record from the new HBA FCF record
1368 * together with the address mode, vlan_id, and other informations. This
1369 * routine is called with the host lock held.
1372 __lpfc_update_fcf_record(struct lpfc_hba
*phba
, struct lpfc_fcf_rec
*fcf_rec
,
1373 struct fcf_record
*new_fcf_record
, uint32_t addr_mode
,
1374 uint16_t vlan_id
, uint32_t flag
)
1376 /* Copy the fields from the HBA's FCF record */
1377 lpfc_copy_fcf_record(fcf_rec
, new_fcf_record
);
1378 /* Update other fields of driver FCF record */
1379 fcf_rec
->addr_mode
= addr_mode
;
1380 fcf_rec
->vlan_id
= vlan_id
;
1381 fcf_rec
->flag
|= (flag
| RECORD_VALID
);
1382 __lpfc_update_fcf_record_pri(phba
,
1383 bf_get(lpfc_fcf_record_fcf_index
, new_fcf_record
),
1388 * lpfc_register_fcf - Register the FCF with hba.
1389 * @phba: pointer to lpfc hba data structure.
1391 * This routine issues a register fcfi mailbox command to register
1395 lpfc_register_fcf(struct lpfc_hba
*phba
)
1397 LPFC_MBOXQ_t
*fcf_mbxq
;
1400 spin_lock_irq(&phba
->hbalock
);
1401 /* If the FCF is not available do nothing. */
1402 if (!(phba
->fcf
.fcf_flag
& FCF_AVAILABLE
)) {
1403 phba
->hba_flag
&= ~(FCF_TS_INPROG
| FCF_RR_INPROG
);
1404 spin_unlock_irq(&phba
->hbalock
);
1408 /* The FCF is already registered, start discovery */
1409 if (phba
->fcf
.fcf_flag
& FCF_REGISTERED
) {
1410 phba
->fcf
.fcf_flag
|= (FCF_SCAN_DONE
| FCF_IN_USE
);
1411 phba
->hba_flag
&= ~FCF_TS_INPROG
;
1412 if (phba
->pport
->port_state
!= LPFC_FLOGI
) {
1413 phba
->hba_flag
|= FCF_RR_INPROG
;
1414 spin_unlock_irq(&phba
->hbalock
);
1415 lpfc_initial_flogi(phba
->pport
);
1418 spin_unlock_irq(&phba
->hbalock
);
1421 spin_unlock_irq(&phba
->hbalock
);
1423 fcf_mbxq
= mempool_alloc(phba
->mbox_mem_pool
, GFP_KERNEL
);
1425 spin_lock_irq(&phba
->hbalock
);
1426 phba
->hba_flag
&= ~(FCF_TS_INPROG
| FCF_RR_INPROG
);
1427 spin_unlock_irq(&phba
->hbalock
);
1431 lpfc_reg_fcfi(phba
, fcf_mbxq
);
1432 fcf_mbxq
->vport
= phba
->pport
;
1433 fcf_mbxq
->mbox_cmpl
= lpfc_mbx_cmpl_reg_fcfi
;
1434 rc
= lpfc_sli_issue_mbox(phba
, fcf_mbxq
, MBX_NOWAIT
);
1435 if (rc
== MBX_NOT_FINISHED
) {
1436 spin_lock_irq(&phba
->hbalock
);
1437 phba
->hba_flag
&= ~(FCF_TS_INPROG
| FCF_RR_INPROG
);
1438 spin_unlock_irq(&phba
->hbalock
);
1439 mempool_free(fcf_mbxq
, phba
->mbox_mem_pool
);
1446 * lpfc_match_fcf_conn_list - Check if the FCF record can be used for discovery.
1447 * @phba: pointer to lpfc hba data structure.
1448 * @new_fcf_record: pointer to fcf record.
1449 * @boot_flag: Indicates if this record used by boot bios.
1450 * @addr_mode: The address mode to be used by this FCF
1451 * @vlan_id: The vlan id to be used as vlan tagging by this FCF.
1453 * This routine compare the fcf record with connect list obtained from the
1454 * config region to decide if this FCF can be used for SAN discovery. It returns
1455 * 1 if this record can be used for SAN discovery else return zero. If this FCF
1456 * record can be used for SAN discovery, the boot_flag will indicate if this FCF
1457 * is used by boot bios and addr_mode will indicate the addressing mode to be
1458 * used for this FCF when the function returns.
1459 * If the FCF record need to be used with a particular vlan id, the vlan is
1460 * set in the vlan_id on return of the function. If not VLAN tagging need to
1461 * be used with the FCF vlan_id will be set to LPFC_FCOE_NULL_VID;
1464 lpfc_match_fcf_conn_list(struct lpfc_hba
*phba
,
1465 struct fcf_record
*new_fcf_record
,
1466 uint32_t *boot_flag
, uint32_t *addr_mode
,
1469 struct lpfc_fcf_conn_entry
*conn_entry
;
1470 int i
, j
, fcf_vlan_id
= 0;
1472 /* Find the lowest VLAN id in the FCF record */
1473 for (i
= 0; i
< 512; i
++) {
1474 if (new_fcf_record
->vlan_bitmap
[i
]) {
1475 fcf_vlan_id
= i
* 8;
1477 while (!((new_fcf_record
->vlan_bitmap
[i
] >> j
) & 1)) {
1485 /* If FCF not available return 0 */
1486 if (!bf_get(lpfc_fcf_record_fcf_avail
, new_fcf_record
) ||
1487 !bf_get(lpfc_fcf_record_fcf_valid
, new_fcf_record
))
1490 if (!(phba
->hba_flag
& HBA_FIP_SUPPORT
)) {
1492 *addr_mode
= bf_get(lpfc_fcf_record_mac_addr_prov
,
1494 if (phba
->valid_vlan
)
1495 *vlan_id
= phba
->vlan_id
;
1497 *vlan_id
= LPFC_FCOE_NULL_VID
;
1502 * If there are no FCF connection table entry, driver connect to all
1505 if (list_empty(&phba
->fcf_conn_rec_list
)) {
1507 *addr_mode
= bf_get(lpfc_fcf_record_mac_addr_prov
,
1511 * When there are no FCF connect entries, use driver's default
1512 * addressing mode - FPMA.
1514 if (*addr_mode
& LPFC_FCF_FPMA
)
1515 *addr_mode
= LPFC_FCF_FPMA
;
1517 /* If FCF record report a vlan id use that vlan id */
1519 *vlan_id
= fcf_vlan_id
;
1521 *vlan_id
= LPFC_FCOE_NULL_VID
;
1525 list_for_each_entry(conn_entry
,
1526 &phba
->fcf_conn_rec_list
, list
) {
1527 if (!(conn_entry
->conn_rec
.flags
& FCFCNCT_VALID
))
1530 if ((conn_entry
->conn_rec
.flags
& FCFCNCT_FBNM_VALID
) &&
1531 !lpfc_fab_name_match(conn_entry
->conn_rec
.fabric_name
,
1534 if ((conn_entry
->conn_rec
.flags
& FCFCNCT_SWNM_VALID
) &&
1535 !lpfc_sw_name_match(conn_entry
->conn_rec
.switch_name
,
1538 if (conn_entry
->conn_rec
.flags
& FCFCNCT_VLAN_VALID
) {
1540 * If the vlan bit map does not have the bit set for the
1541 * vlan id to be used, then it is not a match.
1543 if (!(new_fcf_record
->vlan_bitmap
1544 [conn_entry
->conn_rec
.vlan_tag
/ 8] &
1545 (1 << (conn_entry
->conn_rec
.vlan_tag
% 8))))
1550 * If connection record does not support any addressing mode,
1551 * skip the FCF record.
1553 if (!(bf_get(lpfc_fcf_record_mac_addr_prov
, new_fcf_record
)
1554 & (LPFC_FCF_FPMA
| LPFC_FCF_SPMA
)))
1558 * Check if the connection record specifies a required
1561 if ((conn_entry
->conn_rec
.flags
& FCFCNCT_AM_VALID
) &&
1562 !(conn_entry
->conn_rec
.flags
& FCFCNCT_AM_PREFERRED
)) {
1565 * If SPMA required but FCF not support this continue.
1567 if ((conn_entry
->conn_rec
.flags
& FCFCNCT_AM_SPMA
) &&
1568 !(bf_get(lpfc_fcf_record_mac_addr_prov
,
1569 new_fcf_record
) & LPFC_FCF_SPMA
))
1573 * If FPMA required but FCF not support this continue.
1575 if (!(conn_entry
->conn_rec
.flags
& FCFCNCT_AM_SPMA
) &&
1576 !(bf_get(lpfc_fcf_record_mac_addr_prov
,
1577 new_fcf_record
) & LPFC_FCF_FPMA
))
1582 * This fcf record matches filtering criteria.
1584 if (conn_entry
->conn_rec
.flags
& FCFCNCT_BOOT
)
1590 * If user did not specify any addressing mode, or if the
1591 * preferred addressing mode specified by user is not supported
1592 * by FCF, allow fabric to pick the addressing mode.
1594 *addr_mode
= bf_get(lpfc_fcf_record_mac_addr_prov
,
1597 * If the user specified a required address mode, assign that
1600 if ((conn_entry
->conn_rec
.flags
& FCFCNCT_AM_VALID
) &&
1601 (!(conn_entry
->conn_rec
.flags
& FCFCNCT_AM_PREFERRED
)))
1602 *addr_mode
= (conn_entry
->conn_rec
.flags
&
1604 LPFC_FCF_SPMA
: LPFC_FCF_FPMA
;
1606 * If the user specified a preferred address mode, use the
1607 * addr mode only if FCF support the addr_mode.
1609 else if ((conn_entry
->conn_rec
.flags
& FCFCNCT_AM_VALID
) &&
1610 (conn_entry
->conn_rec
.flags
& FCFCNCT_AM_PREFERRED
) &&
1611 (conn_entry
->conn_rec
.flags
& FCFCNCT_AM_SPMA
) &&
1612 (*addr_mode
& LPFC_FCF_SPMA
))
1613 *addr_mode
= LPFC_FCF_SPMA
;
1614 else if ((conn_entry
->conn_rec
.flags
& FCFCNCT_AM_VALID
) &&
1615 (conn_entry
->conn_rec
.flags
& FCFCNCT_AM_PREFERRED
) &&
1616 !(conn_entry
->conn_rec
.flags
& FCFCNCT_AM_SPMA
) &&
1617 (*addr_mode
& LPFC_FCF_FPMA
))
1618 *addr_mode
= LPFC_FCF_FPMA
;
1620 /* If matching connect list has a vlan id, use it */
1621 if (conn_entry
->conn_rec
.flags
& FCFCNCT_VLAN_VALID
)
1622 *vlan_id
= conn_entry
->conn_rec
.vlan_tag
;
1624 * If no vlan id is specified in connect list, use the vlan id
1627 else if (fcf_vlan_id
)
1628 *vlan_id
= fcf_vlan_id
;
1630 *vlan_id
= LPFC_FCOE_NULL_VID
;
1639 * lpfc_check_pending_fcoe_event - Check if there is pending fcoe event.
1640 * @phba: pointer to lpfc hba data structure.
1641 * @unreg_fcf: Unregister FCF if FCF table need to be re-scaned.
1643 * This function check if there is any fcoe event pending while driver
1644 * scan FCF entries. If there is any pending event, it will restart the
1645 * FCF saning and return 1 else return 0.
1648 lpfc_check_pending_fcoe_event(struct lpfc_hba
*phba
, uint8_t unreg_fcf
)
1651 * If the Link is up and no FCoE events while in the
1652 * FCF discovery, no need to restart FCF discovery.
1654 if ((phba
->link_state
>= LPFC_LINK_UP
) &&
1655 (phba
->fcoe_eventtag
== phba
->fcoe_eventtag_at_fcf_scan
))
1658 lpfc_printf_log(phba
, KERN_INFO
, LOG_FIP
,
1659 "2768 Pending link or FCF event during current "
1660 "handling of the previous event: link_state:x%x, "
1661 "evt_tag_at_scan:x%x, evt_tag_current:x%x\n",
1662 phba
->link_state
, phba
->fcoe_eventtag_at_fcf_scan
,
1663 phba
->fcoe_eventtag
);
1665 spin_lock_irq(&phba
->hbalock
);
1666 phba
->fcf
.fcf_flag
&= ~FCF_AVAILABLE
;
1667 spin_unlock_irq(&phba
->hbalock
);
1669 if (phba
->link_state
>= LPFC_LINK_UP
) {
1670 lpfc_printf_log(phba
, KERN_INFO
, LOG_FIP
| LOG_DISCOVERY
,
1671 "2780 Restart FCF table scan due to "
1672 "pending FCF event:evt_tag_at_scan:x%x, "
1673 "evt_tag_current:x%x\n",
1674 phba
->fcoe_eventtag_at_fcf_scan
,
1675 phba
->fcoe_eventtag
);
1676 lpfc_sli4_fcf_scan_read_fcf_rec(phba
, LPFC_FCOE_FCF_GET_FIRST
);
1679 * Do not continue FCF discovery and clear FCF_TS_INPROG
1682 lpfc_printf_log(phba
, KERN_INFO
, LOG_FIP
| LOG_DISCOVERY
,
1683 "2833 Stop FCF discovery process due to link "
1684 "state change (x%x)\n", phba
->link_state
);
1685 spin_lock_irq(&phba
->hbalock
);
1686 phba
->hba_flag
&= ~(FCF_TS_INPROG
| FCF_RR_INPROG
);
1687 phba
->fcf
.fcf_flag
&= ~(FCF_REDISC_FOV
| FCF_DISCOVERY
);
1688 spin_unlock_irq(&phba
->hbalock
);
1691 /* Unregister the currently registered FCF if required */
1693 spin_lock_irq(&phba
->hbalock
);
1694 phba
->fcf
.fcf_flag
&= ~FCF_REGISTERED
;
1695 spin_unlock_irq(&phba
->hbalock
);
1696 lpfc_sli4_unregister_fcf(phba
);
1702 * lpfc_sli4_new_fcf_random_select - Randomly select an eligible new fcf record
1703 * @phba: pointer to lpfc hba data structure.
1704 * @fcf_cnt: number of eligible fcf record seen so far.
1706 * This function makes an running random selection decision on FCF record to
1707 * use through a sequence of @fcf_cnt eligible FCF records with equal
1708 * probability. To perform integer manunipulation of random numbers with
1709 * size unit32_t, the lower 16 bits of the 32-bit random number returned
1710 * from random32() are taken as the random random number generated.
1712 * Returns true when outcome is for the newly read FCF record should be
1713 * chosen; otherwise, return false when outcome is for keeping the previously
1714 * chosen FCF record.
1717 lpfc_sli4_new_fcf_random_select(struct lpfc_hba
*phba
, uint32_t fcf_cnt
)
1721 /* Get 16-bit uniform random number */
1722 rand_num
= (0xFFFF & random32());
1724 /* Decision with probability 1/fcf_cnt */
1725 if ((fcf_cnt
* rand_num
) < 0xFFFF)
1732 * lpfc_sli4_fcf_rec_mbox_parse - Parse read_fcf mbox command.
1733 * @phba: pointer to lpfc hba data structure.
1734 * @mboxq: pointer to mailbox object.
1735 * @next_fcf_index: pointer to holder of next fcf index.
1737 * This routine parses the non-embedded fcf mailbox command by performing the
1738 * necessarily error checking, non-embedded read FCF record mailbox command
1739 * SGE parsing, and endianness swapping.
1741 * Returns the pointer to the new FCF record in the non-embedded mailbox
1742 * command DMA memory if successfully, other NULL.
1744 static struct fcf_record
*
1745 lpfc_sli4_fcf_rec_mbox_parse(struct lpfc_hba
*phba
, LPFC_MBOXQ_t
*mboxq
,
1746 uint16_t *next_fcf_index
)
1749 dma_addr_t phys_addr
;
1750 struct lpfc_mbx_sge sge
;
1751 struct lpfc_mbx_read_fcf_tbl
*read_fcf
;
1752 uint32_t shdr_status
, shdr_add_status
;
1753 union lpfc_sli4_cfg_shdr
*shdr
;
1754 struct fcf_record
*new_fcf_record
;
1756 /* Get the first SGE entry from the non-embedded DMA memory. This
1757 * routine only uses a single SGE.
1759 lpfc_sli4_mbx_sge_get(mboxq
, 0, &sge
);
1760 phys_addr
= getPaddr(sge
.pa_hi
, sge
.pa_lo
);
1761 if (unlikely(!mboxq
->sge_array
)) {
1762 lpfc_printf_log(phba
, KERN_ERR
, LOG_MBOX
,
1763 "2524 Failed to get the non-embedded SGE "
1764 "virtual address\n");
1767 virt_addr
= mboxq
->sge_array
->addr
[0];
1769 shdr
= (union lpfc_sli4_cfg_shdr
*)virt_addr
;
1770 shdr_status
= bf_get(lpfc_mbox_hdr_status
, &shdr
->response
);
1771 shdr_add_status
= bf_get(lpfc_mbox_hdr_add_status
, &shdr
->response
);
1772 if (shdr_status
|| shdr_add_status
) {
1773 if (shdr_status
== STATUS_FCF_TABLE_EMPTY
)
1774 lpfc_printf_log(phba
, KERN_ERR
, LOG_FIP
,
1775 "2726 READ_FCF_RECORD Indicates empty "
1778 lpfc_printf_log(phba
, KERN_ERR
, LOG_FIP
,
1779 "2521 READ_FCF_RECORD mailbox failed "
1780 "with status x%x add_status x%x, "
1781 "mbx\n", shdr_status
, shdr_add_status
);
1785 /* Interpreting the returned information of the FCF record */
1786 read_fcf
= (struct lpfc_mbx_read_fcf_tbl
*)virt_addr
;
1787 lpfc_sli_pcimem_bcopy(read_fcf
, read_fcf
,
1788 sizeof(struct lpfc_mbx_read_fcf_tbl
));
1789 *next_fcf_index
= bf_get(lpfc_mbx_read_fcf_tbl_nxt_vindx
, read_fcf
);
1790 new_fcf_record
= (struct fcf_record
*)(virt_addr
+
1791 sizeof(struct lpfc_mbx_read_fcf_tbl
));
1792 lpfc_sli_pcimem_bcopy(new_fcf_record
, new_fcf_record
,
1793 offsetof(struct fcf_record
, vlan_bitmap
));
1794 new_fcf_record
->word137
= le32_to_cpu(new_fcf_record
->word137
);
1795 new_fcf_record
->word138
= le32_to_cpu(new_fcf_record
->word138
);
1797 return new_fcf_record
;
1801 * lpfc_sli4_log_fcf_record_info - Log the information of a fcf record
1802 * @phba: pointer to lpfc hba data structure.
1803 * @fcf_record: pointer to the fcf record.
1804 * @vlan_id: the lowest vlan identifier associated to this fcf record.
1805 * @next_fcf_index: the index to the next fcf record in hba's fcf table.
1807 * This routine logs the detailed FCF record if the LOG_FIP loggin is
1811 lpfc_sli4_log_fcf_record_info(struct lpfc_hba
*phba
,
1812 struct fcf_record
*fcf_record
,
1814 uint16_t next_fcf_index
)
1816 lpfc_printf_log(phba
, KERN_INFO
, LOG_FIP
,
1817 "2764 READ_FCF_RECORD:\n"
1818 "\tFCF_Index : x%x\n"
1819 "\tFCF_Avail : x%x\n"
1820 "\tFCF_Valid : x%x\n"
1821 "\tFIP_Priority : x%x\n"
1822 "\tMAC_Provider : x%x\n"
1823 "\tLowest VLANID : x%x\n"
1824 "\tFCF_MAC Addr : x%x:%x:%x:%x:%x:%x\n"
1825 "\tFabric_Name : x%x:%x:%x:%x:%x:%x:%x:%x\n"
1826 "\tSwitch_Name : x%x:%x:%x:%x:%x:%x:%x:%x\n"
1827 "\tNext_FCF_Index: x%x\n",
1828 bf_get(lpfc_fcf_record_fcf_index
, fcf_record
),
1829 bf_get(lpfc_fcf_record_fcf_avail
, fcf_record
),
1830 bf_get(lpfc_fcf_record_fcf_valid
, fcf_record
),
1831 fcf_record
->fip_priority
,
1832 bf_get(lpfc_fcf_record_mac_addr_prov
, fcf_record
),
1834 bf_get(lpfc_fcf_record_mac_0
, fcf_record
),
1835 bf_get(lpfc_fcf_record_mac_1
, fcf_record
),
1836 bf_get(lpfc_fcf_record_mac_2
, fcf_record
),
1837 bf_get(lpfc_fcf_record_mac_3
, fcf_record
),
1838 bf_get(lpfc_fcf_record_mac_4
, fcf_record
),
1839 bf_get(lpfc_fcf_record_mac_5
, fcf_record
),
1840 bf_get(lpfc_fcf_record_fab_name_0
, fcf_record
),
1841 bf_get(lpfc_fcf_record_fab_name_1
, fcf_record
),
1842 bf_get(lpfc_fcf_record_fab_name_2
, fcf_record
),
1843 bf_get(lpfc_fcf_record_fab_name_3
, fcf_record
),
1844 bf_get(lpfc_fcf_record_fab_name_4
, fcf_record
),
1845 bf_get(lpfc_fcf_record_fab_name_5
, fcf_record
),
1846 bf_get(lpfc_fcf_record_fab_name_6
, fcf_record
),
1847 bf_get(lpfc_fcf_record_fab_name_7
, fcf_record
),
1848 bf_get(lpfc_fcf_record_switch_name_0
, fcf_record
),
1849 bf_get(lpfc_fcf_record_switch_name_1
, fcf_record
),
1850 bf_get(lpfc_fcf_record_switch_name_2
, fcf_record
),
1851 bf_get(lpfc_fcf_record_switch_name_3
, fcf_record
),
1852 bf_get(lpfc_fcf_record_switch_name_4
, fcf_record
),
1853 bf_get(lpfc_fcf_record_switch_name_5
, fcf_record
),
1854 bf_get(lpfc_fcf_record_switch_name_6
, fcf_record
),
1855 bf_get(lpfc_fcf_record_switch_name_7
, fcf_record
),
1860 lpfc_sli4_fcf_record_match - testing new FCF record for matching existing FCF
1861 * @phba: pointer to lpfc hba data structure.
1862 * @fcf_rec: pointer to an existing FCF record.
1863 * @new_fcf_record: pointer to a new FCF record.
1864 * @new_vlan_id: vlan id from the new FCF record.
1866 * This function performs matching test of a new FCF record against an existing
1867 * FCF record. If the new_vlan_id passed in is LPFC_FCOE_IGNORE_VID, vlan id
1868 * will not be used as part of the FCF record matching criteria.
1870 * Returns true if all the fields matching, otherwise returns false.
1873 lpfc_sli4_fcf_record_match(struct lpfc_hba
*phba
,
1874 struct lpfc_fcf_rec
*fcf_rec
,
1875 struct fcf_record
*new_fcf_record
,
1876 uint16_t new_vlan_id
)
1878 if (new_vlan_id
!= LPFC_FCOE_IGNORE_VID
)
1879 if (!lpfc_vlan_id_match(fcf_rec
->vlan_id
, new_vlan_id
))
1881 if (!lpfc_mac_addr_match(fcf_rec
->mac_addr
, new_fcf_record
))
1883 if (!lpfc_sw_name_match(fcf_rec
->switch_name
, new_fcf_record
))
1885 if (!lpfc_fab_name_match(fcf_rec
->fabric_name
, new_fcf_record
))
1887 if (fcf_rec
->priority
!= new_fcf_record
->fip_priority
)
1893 * lpfc_sli4_fcf_rr_next_proc - processing next roundrobin fcf
1894 * @vport: Pointer to vport object.
1895 * @fcf_index: index to next fcf.
1897 * This function processing the roundrobin fcf failover to next fcf index.
1898 * When this function is invoked, there will be a current fcf registered
1900 * Return: 0 for continue retrying flogi on currently registered fcf;
1901 * 1 for stop flogi on currently registered fcf;
1903 int lpfc_sli4_fcf_rr_next_proc(struct lpfc_vport
*vport
, uint16_t fcf_index
)
1905 struct lpfc_hba
*phba
= vport
->phba
;
1908 if (fcf_index
== LPFC_FCOE_FCF_NEXT_NONE
) {
1909 spin_lock_irq(&phba
->hbalock
);
1910 if (phba
->hba_flag
& HBA_DEVLOSS_TMO
) {
1911 spin_unlock_irq(&phba
->hbalock
);
1912 lpfc_printf_log(phba
, KERN_INFO
, LOG_FIP
,
1913 "2872 Devloss tmo with no eligible "
1914 "FCF, unregister in-use FCF (x%x) "
1915 "and rescan FCF table\n",
1916 phba
->fcf
.current_rec
.fcf_indx
);
1917 lpfc_unregister_fcf_rescan(phba
);
1918 goto stop_flogi_current_fcf
;
1920 /* Mark the end to FLOGI roundrobin failover */
1921 phba
->hba_flag
&= ~FCF_RR_INPROG
;
1922 /* Allow action to new fcf asynchronous event */
1923 phba
->fcf
.fcf_flag
&= ~(FCF_AVAILABLE
| FCF_SCAN_DONE
);
1924 spin_unlock_irq(&phba
->hbalock
);
1925 lpfc_printf_log(phba
, KERN_INFO
, LOG_FIP
,
1926 "2865 No FCF available, stop roundrobin FCF "
1927 "failover and change port state:x%x/x%x\n",
1928 phba
->pport
->port_state
, LPFC_VPORT_UNKNOWN
);
1929 phba
->pport
->port_state
= LPFC_VPORT_UNKNOWN
;
1930 goto stop_flogi_current_fcf
;
1932 lpfc_printf_log(phba
, KERN_INFO
, LOG_FIP
| LOG_ELS
,
1933 "2794 Try FLOGI roundrobin FCF failover to "
1934 "(x%x)\n", fcf_index
);
1935 rc
= lpfc_sli4_fcf_rr_read_fcf_rec(phba
, fcf_index
);
1937 lpfc_printf_log(phba
, KERN_WARNING
, LOG_FIP
| LOG_ELS
,
1938 "2761 FLOGI roundrobin FCF failover "
1939 "failed (rc:x%x) to read FCF (x%x)\n",
1940 rc
, phba
->fcf
.current_rec
.fcf_indx
);
1942 goto stop_flogi_current_fcf
;
1946 stop_flogi_current_fcf
:
1947 lpfc_can_disctmo(vport
);
1952 * lpfc_sli4_fcf_pri_list_del
1953 * @phba: pointer to lpfc hba data structure.
1954 * @fcf_index the index of the fcf record to delete
1955 * This routine checks the on list flag of the fcf_index to be deleted.
1956 * If it is one the list then it is removed from the list, and the flag
1957 * is cleared. This routine grab the hbalock before removing the fcf
1958 * record from the list.
1960 static void lpfc_sli4_fcf_pri_list_del(struct lpfc_hba
*phba
,
1963 struct lpfc_fcf_pri
*new_fcf_pri
;
1965 new_fcf_pri
= &phba
->fcf
.fcf_pri
[fcf_index
];
1966 lpfc_printf_log(phba
, KERN_INFO
, LOG_FIP
,
1967 "3058 deleting idx x%x pri x%x flg x%x\n",
1968 fcf_index
, new_fcf_pri
->fcf_rec
.priority
,
1969 new_fcf_pri
->fcf_rec
.flag
);
1970 spin_lock_irq(&phba
->hbalock
);
1971 if (new_fcf_pri
->fcf_rec
.flag
& LPFC_FCF_ON_PRI_LIST
) {
1972 if (phba
->fcf
.current_rec
.priority
==
1973 new_fcf_pri
->fcf_rec
.priority
)
1974 phba
->fcf
.eligible_fcf_cnt
--;
1975 list_del_init(&new_fcf_pri
->list
);
1976 new_fcf_pri
->fcf_rec
.flag
&= ~LPFC_FCF_ON_PRI_LIST
;
1978 spin_unlock_irq(&phba
->hbalock
);
1982 * lpfc_sli4_set_fcf_flogi_fail
1983 * @phba: pointer to lpfc hba data structure.
1984 * @fcf_index the index of the fcf record to update
1985 * This routine acquires the hbalock and then set the LPFC_FCF_FLOGI_FAILED
1986 * flag so the the round robin slection for the particular priority level
1987 * will try a different fcf record that does not have this bit set.
1988 * If the fcf record is re-read for any reason this flag is cleared brfore
1989 * adding it to the priority list.
1992 lpfc_sli4_set_fcf_flogi_fail(struct lpfc_hba
*phba
, uint16_t fcf_index
)
1994 struct lpfc_fcf_pri
*new_fcf_pri
;
1995 new_fcf_pri
= &phba
->fcf
.fcf_pri
[fcf_index
];
1996 spin_lock_irq(&phba
->hbalock
);
1997 new_fcf_pri
->fcf_rec
.flag
|= LPFC_FCF_FLOGI_FAILED
;
1998 spin_unlock_irq(&phba
->hbalock
);
2002 * lpfc_sli4_fcf_pri_list_add
2003 * @phba: pointer to lpfc hba data structure.
2004 * @fcf_index the index of the fcf record to add
2005 * This routine checks the priority of the fcf_index to be added.
2006 * If it is a lower priority than the current head of the fcf_pri list
2007 * then it is added to the list in the right order.
2008 * If it is the same priority as the current head of the list then it
2009 * is added to the head of the list and its bit in the rr_bmask is set.
2010 * If the fcf_index to be added is of a higher priority than the current
2011 * head of the list then the rr_bmask is cleared, its bit is set in the
2012 * rr_bmask and it is added to the head of the list.
2014 * 0=success 1=failure
2016 int lpfc_sli4_fcf_pri_list_add(struct lpfc_hba
*phba
, uint16_t fcf_index
,
2017 struct fcf_record
*new_fcf_record
)
2019 uint16_t current_fcf_pri
;
2020 uint16_t last_index
;
2021 struct lpfc_fcf_pri
*fcf_pri
;
2022 struct lpfc_fcf_pri
*next_fcf_pri
;
2023 struct lpfc_fcf_pri
*new_fcf_pri
;
2026 new_fcf_pri
= &phba
->fcf
.fcf_pri
[fcf_index
];
2027 lpfc_printf_log(phba
, KERN_INFO
, LOG_FIP
,
2028 "3059 adding idx x%x pri x%x flg x%x\n",
2029 fcf_index
, new_fcf_record
->fip_priority
,
2030 new_fcf_pri
->fcf_rec
.flag
);
2031 spin_lock_irq(&phba
->hbalock
);
2032 if (new_fcf_pri
->fcf_rec
.flag
& LPFC_FCF_ON_PRI_LIST
)
2033 list_del_init(&new_fcf_pri
->list
);
2034 new_fcf_pri
->fcf_rec
.fcf_index
= fcf_index
;
2035 new_fcf_pri
->fcf_rec
.priority
= new_fcf_record
->fip_priority
;
2036 if (list_empty(&phba
->fcf
.fcf_pri_list
)) {
2037 list_add(&new_fcf_pri
->list
, &phba
->fcf
.fcf_pri_list
);
2038 ret
= lpfc_sli4_fcf_rr_index_set(phba
,
2039 new_fcf_pri
->fcf_rec
.fcf_index
);
2043 last_index
= find_first_bit(phba
->fcf
.fcf_rr_bmask
,
2044 LPFC_SLI4_FCF_TBL_INDX_MAX
);
2045 if (last_index
>= LPFC_SLI4_FCF_TBL_INDX_MAX
) {
2046 ret
= 0; /* Empty rr list */
2049 current_fcf_pri
= phba
->fcf
.fcf_pri
[last_index
].fcf_rec
.priority
;
2050 if (new_fcf_pri
->fcf_rec
.priority
<= current_fcf_pri
) {
2051 list_add(&new_fcf_pri
->list
, &phba
->fcf
.fcf_pri_list
);
2052 if (new_fcf_pri
->fcf_rec
.priority
< current_fcf_pri
) {
2053 memset(phba
->fcf
.fcf_rr_bmask
, 0,
2054 sizeof(*phba
->fcf
.fcf_rr_bmask
));
2055 /* fcfs_at_this_priority_level = 1; */
2056 phba
->fcf
.eligible_fcf_cnt
= 1;
2058 /* fcfs_at_this_priority_level++; */
2059 phba
->fcf
.eligible_fcf_cnt
++;
2060 ret
= lpfc_sli4_fcf_rr_index_set(phba
,
2061 new_fcf_pri
->fcf_rec
.fcf_index
);
2065 list_for_each_entry_safe(fcf_pri
, next_fcf_pri
,
2066 &phba
->fcf
.fcf_pri_list
, list
) {
2067 if (new_fcf_pri
->fcf_rec
.priority
<=
2068 fcf_pri
->fcf_rec
.priority
) {
2069 if (fcf_pri
->list
.prev
== &phba
->fcf
.fcf_pri_list
)
2070 list_add(&new_fcf_pri
->list
,
2071 &phba
->fcf
.fcf_pri_list
);
2073 list_add(&new_fcf_pri
->list
,
2074 &((struct lpfc_fcf_pri
*)
2075 fcf_pri
->list
.prev
)->list
);
2078 } else if (fcf_pri
->list
.next
== &phba
->fcf
.fcf_pri_list
2079 || new_fcf_pri
->fcf_rec
.priority
<
2080 next_fcf_pri
->fcf_rec
.priority
) {
2081 list_add(&new_fcf_pri
->list
, &fcf_pri
->list
);
2085 if (new_fcf_pri
->fcf_rec
.priority
> fcf_pri
->fcf_rec
.priority
)
2091 /* we use = instead of |= to clear the FLOGI_FAILED flag. */
2092 new_fcf_pri
->fcf_rec
.flag
= LPFC_FCF_ON_PRI_LIST
;
2093 spin_unlock_irq(&phba
->hbalock
);
2098 * lpfc_mbx_cmpl_fcf_scan_read_fcf_rec - fcf scan read_fcf mbox cmpl handler.
2099 * @phba: pointer to lpfc hba data structure.
2100 * @mboxq: pointer to mailbox object.
2102 * This function iterates through all the fcf records available in
2103 * HBA and chooses the optimal FCF record for discovery. After finding
2104 * the FCF for discovery it registers the FCF record and kicks start
2106 * If FCF_IN_USE flag is set in currently used FCF, the routine tries to
2107 * use an FCF record which matches fabric name and mac address of the
2108 * currently used FCF record.
2109 * If the driver supports only one FCF, it will try to use the FCF record
2110 * used by BOOT_BIOS.
2113 lpfc_mbx_cmpl_fcf_scan_read_fcf_rec(struct lpfc_hba
*phba
, LPFC_MBOXQ_t
*mboxq
)
2115 struct fcf_record
*new_fcf_record
;
2116 uint32_t boot_flag
, addr_mode
;
2117 uint16_t fcf_index
, next_fcf_index
;
2118 struct lpfc_fcf_rec
*fcf_rec
= NULL
;
2121 bool select_new_fcf
;
2124 /* If there is pending FCoE event restart FCF table scan */
2125 if (lpfc_check_pending_fcoe_event(phba
, LPFC_SKIP_UNREG_FCF
)) {
2126 lpfc_sli4_mbox_cmd_free(phba
, mboxq
);
2130 /* Parse the FCF record from the non-embedded mailbox command */
2131 new_fcf_record
= lpfc_sli4_fcf_rec_mbox_parse(phba
, mboxq
,
2133 if (!new_fcf_record
) {
2134 lpfc_printf_log(phba
, KERN_ERR
, LOG_FIP
,
2135 "2765 Mailbox command READ_FCF_RECORD "
2136 "failed to retrieve a FCF record.\n");
2137 /* Let next new FCF event trigger fast failover */
2138 spin_lock_irq(&phba
->hbalock
);
2139 phba
->hba_flag
&= ~FCF_TS_INPROG
;
2140 spin_unlock_irq(&phba
->hbalock
);
2141 lpfc_sli4_mbox_cmd_free(phba
, mboxq
);
2145 /* Check the FCF record against the connection list */
2146 rc
= lpfc_match_fcf_conn_list(phba
, new_fcf_record
, &boot_flag
,
2147 &addr_mode
, &vlan_id
);
2149 /* Log the FCF record information if turned on */
2150 lpfc_sli4_log_fcf_record_info(phba
, new_fcf_record
, vlan_id
,
2154 * If the fcf record does not match with connect list entries
2155 * read the next entry; otherwise, this is an eligible FCF
2156 * record for roundrobin FCF failover.
2159 lpfc_sli4_fcf_pri_list_del(phba
,
2160 bf_get(lpfc_fcf_record_fcf_index
,
2162 lpfc_printf_log(phba
, KERN_WARNING
, LOG_FIP
,
2163 "2781 FCF (x%x) failed connection "
2164 "list check: (x%x/x%x)\n",
2165 bf_get(lpfc_fcf_record_fcf_index
,
2167 bf_get(lpfc_fcf_record_fcf_avail
,
2169 bf_get(lpfc_fcf_record_fcf_valid
,
2171 if ((phba
->fcf
.fcf_flag
& FCF_IN_USE
) &&
2172 lpfc_sli4_fcf_record_match(phba
, &phba
->fcf
.current_rec
,
2173 new_fcf_record
, LPFC_FCOE_IGNORE_VID
)) {
2174 if (bf_get(lpfc_fcf_record_fcf_index
, new_fcf_record
) !=
2175 phba
->fcf
.current_rec
.fcf_indx
) {
2176 lpfc_printf_log(phba
, KERN_ERR
, LOG_FIP
,
2177 "2862 FCF (x%x) matches property "
2178 "of in-use FCF (x%x)\n",
2179 bf_get(lpfc_fcf_record_fcf_index
,
2181 phba
->fcf
.current_rec
.fcf_indx
);
2185 * In case the current in-use FCF record becomes
2186 * invalid/unavailable during FCF discovery that
2187 * was not triggered by fast FCF failover process,
2188 * treat it as fast FCF failover.
2190 if (!(phba
->fcf
.fcf_flag
& FCF_REDISC_PEND
) &&
2191 !(phba
->fcf
.fcf_flag
& FCF_REDISC_FOV
)) {
2192 lpfc_printf_log(phba
, KERN_WARNING
, LOG_FIP
,
2193 "2835 Invalid in-use FCF "
2194 "(x%x), enter FCF failover "
2196 phba
->fcf
.current_rec
.fcf_indx
);
2197 spin_lock_irq(&phba
->hbalock
);
2198 phba
->fcf
.fcf_flag
|= FCF_REDISC_FOV
;
2199 spin_unlock_irq(&phba
->hbalock
);
2200 lpfc_sli4_mbox_cmd_free(phba
, mboxq
);
2201 lpfc_sli4_fcf_scan_read_fcf_rec(phba
,
2202 LPFC_FCOE_FCF_GET_FIRST
);
2208 fcf_index
= bf_get(lpfc_fcf_record_fcf_index
, new_fcf_record
);
2209 rc
= lpfc_sli4_fcf_pri_list_add(phba
, fcf_index
,
2216 * If this is not the first FCF discovery of the HBA, use last
2217 * FCF record for the discovery. The condition that a rescan
2218 * matches the in-use FCF record: fabric name, switch name, mac
2219 * address, and vlan_id.
2221 spin_lock_irq(&phba
->hbalock
);
2222 if (phba
->fcf
.fcf_flag
& FCF_IN_USE
) {
2223 if (phba
->cfg_fcf_failover_policy
== LPFC_FCF_FOV
&&
2224 lpfc_sli4_fcf_record_match(phba
, &phba
->fcf
.current_rec
,
2225 new_fcf_record
, vlan_id
)) {
2226 if (bf_get(lpfc_fcf_record_fcf_index
, new_fcf_record
) ==
2227 phba
->fcf
.current_rec
.fcf_indx
) {
2228 phba
->fcf
.fcf_flag
|= FCF_AVAILABLE
;
2229 if (phba
->fcf
.fcf_flag
& FCF_REDISC_PEND
)
2230 /* Stop FCF redisc wait timer */
2231 __lpfc_sli4_stop_fcf_redisc_wait_timer(
2233 else if (phba
->fcf
.fcf_flag
& FCF_REDISC_FOV
)
2234 /* Fast failover, mark completed */
2235 phba
->fcf
.fcf_flag
&= ~FCF_REDISC_FOV
;
2236 spin_unlock_irq(&phba
->hbalock
);
2237 lpfc_printf_log(phba
, KERN_INFO
, LOG_FIP
,
2238 "2836 New FCF matches in-use "
2240 phba
->fcf
.current_rec
.fcf_indx
);
2243 lpfc_printf_log(phba
, KERN_ERR
, LOG_FIP
,
2244 "2863 New FCF (x%x) matches "
2245 "property of in-use FCF (x%x)\n",
2246 bf_get(lpfc_fcf_record_fcf_index
,
2248 phba
->fcf
.current_rec
.fcf_indx
);
2251 * Read next FCF record from HBA searching for the matching
2252 * with in-use record only if not during the fast failover
2253 * period. In case of fast failover period, it shall try to
2254 * determine whether the FCF record just read should be the
2257 if (!(phba
->fcf
.fcf_flag
& FCF_REDISC_FOV
)) {
2258 spin_unlock_irq(&phba
->hbalock
);
2263 * Update on failover FCF record only if it's in FCF fast-failover
2264 * period; otherwise, update on current FCF record.
2266 if (phba
->fcf
.fcf_flag
& FCF_REDISC_FOV
)
2267 fcf_rec
= &phba
->fcf
.failover_rec
;
2269 fcf_rec
= &phba
->fcf
.current_rec
;
2271 if (phba
->fcf
.fcf_flag
& FCF_AVAILABLE
) {
2273 * If the driver FCF record does not have boot flag
2274 * set and new hba fcf record has boot flag set, use
2275 * the new hba fcf record.
2277 if (boot_flag
&& !(fcf_rec
->flag
& BOOT_ENABLE
)) {
2278 /* Choose this FCF record */
2279 lpfc_printf_log(phba
, KERN_INFO
, LOG_FIP
,
2280 "2837 Update current FCF record "
2281 "(x%x) with new FCF record (x%x)\n",
2283 bf_get(lpfc_fcf_record_fcf_index
,
2285 __lpfc_update_fcf_record(phba
, fcf_rec
, new_fcf_record
,
2286 addr_mode
, vlan_id
, BOOT_ENABLE
);
2287 spin_unlock_irq(&phba
->hbalock
);
2291 * If the driver FCF record has boot flag set and the
2292 * new hba FCF record does not have boot flag, read
2293 * the next FCF record.
2295 if (!boot_flag
&& (fcf_rec
->flag
& BOOT_ENABLE
)) {
2296 spin_unlock_irq(&phba
->hbalock
);
2300 * If the new hba FCF record has lower priority value
2301 * than the driver FCF record, use the new record.
2303 if (new_fcf_record
->fip_priority
< fcf_rec
->priority
) {
2304 /* Choose the new FCF record with lower priority */
2305 lpfc_printf_log(phba
, KERN_INFO
, LOG_FIP
,
2306 "2838 Update current FCF record "
2307 "(x%x) with new FCF record (x%x)\n",
2309 bf_get(lpfc_fcf_record_fcf_index
,
2311 __lpfc_update_fcf_record(phba
, fcf_rec
, new_fcf_record
,
2312 addr_mode
, vlan_id
, 0);
2313 /* Reset running random FCF selection count */
2314 phba
->fcf
.eligible_fcf_cnt
= 1;
2315 } else if (new_fcf_record
->fip_priority
== fcf_rec
->priority
) {
2316 /* Update running random FCF selection count */
2317 phba
->fcf
.eligible_fcf_cnt
++;
2318 select_new_fcf
= lpfc_sli4_new_fcf_random_select(phba
,
2319 phba
->fcf
.eligible_fcf_cnt
);
2320 if (select_new_fcf
) {
2321 lpfc_printf_log(phba
, KERN_INFO
, LOG_FIP
,
2322 "2839 Update current FCF record "
2323 "(x%x) with new FCF record (x%x)\n",
2325 bf_get(lpfc_fcf_record_fcf_index
,
2327 /* Choose the new FCF by random selection */
2328 __lpfc_update_fcf_record(phba
, fcf_rec
,
2330 addr_mode
, vlan_id
, 0);
2333 spin_unlock_irq(&phba
->hbalock
);
2337 * This is the first suitable FCF record, choose this record for
2338 * initial best-fit FCF.
2341 lpfc_printf_log(phba
, KERN_INFO
, LOG_FIP
,
2342 "2840 Update initial FCF candidate "
2344 bf_get(lpfc_fcf_record_fcf_index
,
2346 __lpfc_update_fcf_record(phba
, fcf_rec
, new_fcf_record
,
2347 addr_mode
, vlan_id
, (boot_flag
?
2349 phba
->fcf
.fcf_flag
|= FCF_AVAILABLE
;
2350 /* Setup initial running random FCF selection count */
2351 phba
->fcf
.eligible_fcf_cnt
= 1;
2352 /* Seeding the random number generator for random selection */
2353 seed
= (uint32_t)(0xFFFFFFFF & jiffies
);
2356 spin_unlock_irq(&phba
->hbalock
);
2360 lpfc_sli4_mbox_cmd_free(phba
, mboxq
);
2361 if (next_fcf_index
== LPFC_FCOE_FCF_NEXT_NONE
|| next_fcf_index
== 0) {
2362 if (phba
->fcf
.fcf_flag
& FCF_REDISC_FOV
) {
2364 * Case of FCF fast failover scan
2368 * It has not found any suitable FCF record, cancel
2369 * FCF scan inprogress, and do nothing
2371 if (!(phba
->fcf
.failover_rec
.flag
& RECORD_VALID
)) {
2372 lpfc_printf_log(phba
, KERN_WARNING
, LOG_FIP
,
2373 "2782 No suitable FCF found: "
2375 phba
->fcoe_eventtag_at_fcf_scan
,
2376 bf_get(lpfc_fcf_record_fcf_index
,
2378 spin_lock_irq(&phba
->hbalock
);
2379 if (phba
->hba_flag
& HBA_DEVLOSS_TMO
) {
2380 phba
->hba_flag
&= ~FCF_TS_INPROG
;
2381 spin_unlock_irq(&phba
->hbalock
);
2382 /* Unregister in-use FCF and rescan */
2383 lpfc_printf_log(phba
, KERN_INFO
,
2385 "2864 On devloss tmo "
2386 "unreg in-use FCF and "
2387 "rescan FCF table\n");
2388 lpfc_unregister_fcf_rescan(phba
);
2392 * Let next new FCF event trigger fast failover
2394 phba
->hba_flag
&= ~FCF_TS_INPROG
;
2395 spin_unlock_irq(&phba
->hbalock
);
2399 * It has found a suitable FCF record that is not
2400 * the same as in-use FCF record, unregister the
2401 * in-use FCF record, replace the in-use FCF record
2402 * with the new FCF record, mark FCF fast failover
2403 * completed, and then start register the new FCF
2407 /* Unregister the current in-use FCF record */
2408 lpfc_unregister_fcf(phba
);
2410 /* Replace in-use record with the new record */
2411 lpfc_printf_log(phba
, KERN_INFO
, LOG_FIP
,
2412 "2842 Replace in-use FCF (x%x) "
2413 "with failover FCF (x%x)\n",
2414 phba
->fcf
.current_rec
.fcf_indx
,
2415 phba
->fcf
.failover_rec
.fcf_indx
);
2416 memcpy(&phba
->fcf
.current_rec
,
2417 &phba
->fcf
.failover_rec
,
2418 sizeof(struct lpfc_fcf_rec
));
2420 * Mark the fast FCF failover rediscovery completed
2421 * and the start of the first round of the roundrobin
2424 spin_lock_irq(&phba
->hbalock
);
2425 phba
->fcf
.fcf_flag
&= ~FCF_REDISC_FOV
;
2426 spin_unlock_irq(&phba
->hbalock
);
2427 /* Register to the new FCF record */
2428 lpfc_register_fcf(phba
);
2431 * In case of transaction period to fast FCF failover,
2432 * do nothing when search to the end of the FCF table.
2434 if ((phba
->fcf
.fcf_flag
& FCF_REDISC_EVT
) ||
2435 (phba
->fcf
.fcf_flag
& FCF_REDISC_PEND
))
2438 if (phba
->cfg_fcf_failover_policy
== LPFC_FCF_FOV
&&
2439 phba
->fcf
.fcf_flag
& FCF_IN_USE
) {
2441 * In case the current in-use FCF record no
2442 * longer existed during FCF discovery that
2443 * was not triggered by fast FCF failover
2444 * process, treat it as fast FCF failover.
2446 lpfc_printf_log(phba
, KERN_INFO
, LOG_FIP
,
2447 "2841 In-use FCF record (x%x) "
2448 "not reported, entering fast "
2449 "FCF failover mode scanning.\n",
2450 phba
->fcf
.current_rec
.fcf_indx
);
2451 spin_lock_irq(&phba
->hbalock
);
2452 phba
->fcf
.fcf_flag
|= FCF_REDISC_FOV
;
2453 spin_unlock_irq(&phba
->hbalock
);
2454 lpfc_sli4_fcf_scan_read_fcf_rec(phba
,
2455 LPFC_FCOE_FCF_GET_FIRST
);
2458 /* Register to the new FCF record */
2459 lpfc_register_fcf(phba
);
2462 lpfc_sli4_fcf_scan_read_fcf_rec(phba
, next_fcf_index
);
2466 lpfc_sli4_mbox_cmd_free(phba
, mboxq
);
2467 lpfc_register_fcf(phba
);
2473 * lpfc_mbx_cmpl_fcf_rr_read_fcf_rec - fcf roundrobin read_fcf mbox cmpl hdler
2474 * @phba: pointer to lpfc hba data structure.
2475 * @mboxq: pointer to mailbox object.
2477 * This is the callback function for FLOGI failure roundrobin FCF failover
2478 * read FCF record mailbox command from the eligible FCF record bmask for
2479 * performing the failover. If the FCF read back is not valid/available, it
2480 * fails through to retrying FLOGI to the currently registered FCF again.
2481 * Otherwise, if the FCF read back is valid and available, it will set the
2482 * newly read FCF record to the failover FCF record, unregister currently
2483 * registered FCF record, copy the failover FCF record to the current
2484 * FCF record, and then register the current FCF record before proceeding
2485 * to trying FLOGI on the new failover FCF.
2488 lpfc_mbx_cmpl_fcf_rr_read_fcf_rec(struct lpfc_hba
*phba
, LPFC_MBOXQ_t
*mboxq
)
2490 struct fcf_record
*new_fcf_record
;
2491 uint32_t boot_flag
, addr_mode
;
2492 uint16_t next_fcf_index
, fcf_index
;
2493 uint16_t current_fcf_index
;
2497 /* If link state is not up, stop the roundrobin failover process */
2498 if (phba
->link_state
< LPFC_LINK_UP
) {
2499 spin_lock_irq(&phba
->hbalock
);
2500 phba
->fcf
.fcf_flag
&= ~FCF_DISCOVERY
;
2501 phba
->hba_flag
&= ~FCF_RR_INPROG
;
2502 spin_unlock_irq(&phba
->hbalock
);
2506 /* Parse the FCF record from the non-embedded mailbox command */
2507 new_fcf_record
= lpfc_sli4_fcf_rec_mbox_parse(phba
, mboxq
,
2509 if (!new_fcf_record
) {
2510 lpfc_printf_log(phba
, KERN_WARNING
, LOG_FIP
,
2511 "2766 Mailbox command READ_FCF_RECORD "
2512 "failed to retrieve a FCF record.\n");
2516 /* Get the needed parameters from FCF record */
2517 rc
= lpfc_match_fcf_conn_list(phba
, new_fcf_record
, &boot_flag
,
2518 &addr_mode
, &vlan_id
);
2520 /* Log the FCF record information if turned on */
2521 lpfc_sli4_log_fcf_record_info(phba
, new_fcf_record
, vlan_id
,
2524 fcf_index
= bf_get(lpfc_fcf_record_fcf_index
, new_fcf_record
);
2526 lpfc_printf_log(phba
, KERN_INFO
, LOG_FIP
,
2527 "2848 Remove ineligible FCF (x%x) from "
2528 "from roundrobin bmask\n", fcf_index
);
2529 /* Clear roundrobin bmask bit for ineligible FCF */
2530 lpfc_sli4_fcf_rr_index_clear(phba
, fcf_index
);
2531 /* Perform next round of roundrobin FCF failover */
2532 fcf_index
= lpfc_sli4_fcf_rr_next_index_get(phba
);
2533 rc
= lpfc_sli4_fcf_rr_next_proc(phba
->pport
, fcf_index
);
2539 if (fcf_index
== phba
->fcf
.current_rec
.fcf_indx
) {
2540 lpfc_printf_log(phba
, KERN_INFO
, LOG_FIP
,
2541 "2760 Perform FLOGI roundrobin FCF failover: "
2542 "FCF (x%x) back to FCF (x%x)\n",
2543 phba
->fcf
.current_rec
.fcf_indx
, fcf_index
);
2544 /* Wait 500 ms before retrying FLOGI to current FCF */
2546 lpfc_issue_init_vfi(phba
->pport
);
2550 /* Upload new FCF record to the failover FCF record */
2551 lpfc_printf_log(phba
, KERN_INFO
, LOG_FIP
,
2552 "2834 Update current FCF (x%x) with new FCF (x%x)\n",
2553 phba
->fcf
.failover_rec
.fcf_indx
, fcf_index
);
2554 spin_lock_irq(&phba
->hbalock
);
2555 __lpfc_update_fcf_record(phba
, &phba
->fcf
.failover_rec
,
2556 new_fcf_record
, addr_mode
, vlan_id
,
2557 (boot_flag
? BOOT_ENABLE
: 0));
2558 spin_unlock_irq(&phba
->hbalock
);
2560 current_fcf_index
= phba
->fcf
.current_rec
.fcf_indx
;
2562 /* Unregister the current in-use FCF record */
2563 lpfc_unregister_fcf(phba
);
2565 /* Replace in-use record with the new record */
2566 memcpy(&phba
->fcf
.current_rec
, &phba
->fcf
.failover_rec
,
2567 sizeof(struct lpfc_fcf_rec
));
2569 lpfc_printf_log(phba
, KERN_INFO
, LOG_FIP
,
2570 "2783 Perform FLOGI roundrobin FCF failover: FCF "
2571 "(x%x) to FCF (x%x)\n", current_fcf_index
, fcf_index
);
2574 lpfc_register_fcf(phba
);
2576 lpfc_sli4_mbox_cmd_free(phba
, mboxq
);
2580 * lpfc_mbx_cmpl_read_fcf_rec - read fcf completion handler.
2581 * @phba: pointer to lpfc hba data structure.
2582 * @mboxq: pointer to mailbox object.
2584 * This is the callback function of read FCF record mailbox command for
2585 * updating the eligible FCF bmask for FLOGI failure roundrobin FCF
2586 * failover when a new FCF event happened. If the FCF read back is
2587 * valid/available and it passes the connection list check, it updates
2588 * the bmask for the eligible FCF record for roundrobin failover.
2591 lpfc_mbx_cmpl_read_fcf_rec(struct lpfc_hba
*phba
, LPFC_MBOXQ_t
*mboxq
)
2593 struct fcf_record
*new_fcf_record
;
2594 uint32_t boot_flag
, addr_mode
;
2595 uint16_t fcf_index
, next_fcf_index
;
2599 /* If link state is not up, no need to proceed */
2600 if (phba
->link_state
< LPFC_LINK_UP
)
2603 /* If FCF discovery period is over, no need to proceed */
2604 if (!(phba
->fcf
.fcf_flag
& FCF_DISCOVERY
))
2607 /* Parse the FCF record from the non-embedded mailbox command */
2608 new_fcf_record
= lpfc_sli4_fcf_rec_mbox_parse(phba
, mboxq
,
2610 if (!new_fcf_record
) {
2611 lpfc_printf_log(phba
, KERN_INFO
, LOG_FIP
,
2612 "2767 Mailbox command READ_FCF_RECORD "
2613 "failed to retrieve a FCF record.\n");
2617 /* Check the connection list for eligibility */
2618 rc
= lpfc_match_fcf_conn_list(phba
, new_fcf_record
, &boot_flag
,
2619 &addr_mode
, &vlan_id
);
2621 /* Log the FCF record information if turned on */
2622 lpfc_sli4_log_fcf_record_info(phba
, new_fcf_record
, vlan_id
,
2628 /* Update the eligible FCF record index bmask */
2629 fcf_index
= bf_get(lpfc_fcf_record_fcf_index
, new_fcf_record
);
2631 rc
= lpfc_sli4_fcf_pri_list_add(phba
, fcf_index
, new_fcf_record
);
2634 lpfc_sli4_mbox_cmd_free(phba
, mboxq
);
2638 * lpfc_init_vfi_cmpl - Completion handler for init_vfi mbox command.
2639 * @phba: pointer to lpfc hba data structure.
2640 * @mboxq: pointer to mailbox data structure.
2642 * This function handles completion of init vfi mailbox command.
2645 lpfc_init_vfi_cmpl(struct lpfc_hba
*phba
, LPFC_MBOXQ_t
*mboxq
)
2647 struct lpfc_vport
*vport
= mboxq
->vport
;
2649 if (mboxq
->u
.mb
.mbxStatus
&& (mboxq
->u
.mb
.mbxStatus
!= 0x4002)) {
2650 lpfc_printf_vlog(vport
, KERN_ERR
,
2652 "2891 Init VFI mailbox failed 0x%x\n",
2653 mboxq
->u
.mb
.mbxStatus
);
2654 mempool_free(mboxq
, phba
->mbox_mem_pool
);
2655 lpfc_vport_set_state(vport
, FC_VPORT_FAILED
);
2658 lpfc_initial_flogi(vport
);
2659 mempool_free(mboxq
, phba
->mbox_mem_pool
);
2664 * lpfc_issue_init_vfi - Issue init_vfi mailbox command.
2665 * @vport: pointer to lpfc_vport data structure.
2667 * This function issue a init_vfi mailbox command to initialize the VFI and
2668 * VPI for the physical port.
2671 lpfc_issue_init_vfi(struct lpfc_vport
*vport
)
2673 LPFC_MBOXQ_t
*mboxq
;
2675 struct lpfc_hba
*phba
= vport
->phba
;
2677 mboxq
= mempool_alloc(phba
->mbox_mem_pool
, GFP_KERNEL
);
2679 lpfc_printf_vlog(vport
, KERN_ERR
,
2680 LOG_MBOX
, "2892 Failed to allocate "
2681 "init_vfi mailbox\n");
2684 lpfc_init_vfi(mboxq
, vport
);
2685 mboxq
->mbox_cmpl
= lpfc_init_vfi_cmpl
;
2686 rc
= lpfc_sli_issue_mbox(phba
, mboxq
, MBX_NOWAIT
);
2687 if (rc
== MBX_NOT_FINISHED
) {
2688 lpfc_printf_vlog(vport
, KERN_ERR
,
2689 LOG_MBOX
, "2893 Failed to issue init_vfi mailbox\n");
2690 mempool_free(mboxq
, vport
->phba
->mbox_mem_pool
);
2695 * lpfc_init_vpi_cmpl - Completion handler for init_vpi mbox command.
2696 * @phba: pointer to lpfc hba data structure.
2697 * @mboxq: pointer to mailbox data structure.
2699 * This function handles completion of init vpi mailbox command.
2702 lpfc_init_vpi_cmpl(struct lpfc_hba
*phba
, LPFC_MBOXQ_t
*mboxq
)
2704 struct lpfc_vport
*vport
= mboxq
->vport
;
2705 struct lpfc_nodelist
*ndlp
;
2706 struct Scsi_Host
*shost
= lpfc_shost_from_vport(vport
);
2708 if (mboxq
->u
.mb
.mbxStatus
) {
2709 lpfc_printf_vlog(vport
, KERN_ERR
,
2711 "2609 Init VPI mailbox failed 0x%x\n",
2712 mboxq
->u
.mb
.mbxStatus
);
2713 mempool_free(mboxq
, phba
->mbox_mem_pool
);
2714 lpfc_vport_set_state(vport
, FC_VPORT_FAILED
);
2717 spin_lock_irq(shost
->host_lock
);
2718 vport
->fc_flag
&= ~FC_VPORT_NEEDS_INIT_VPI
;
2719 spin_unlock_irq(shost
->host_lock
);
2721 /* If this port is physical port or FDISC is done, do reg_vpi */
2722 if ((phba
->pport
== vport
) || (vport
->port_state
== LPFC_FDISC
)) {
2723 ndlp
= lpfc_findnode_did(vport
, Fabric_DID
);
2725 lpfc_printf_vlog(vport
, KERN_ERR
,
2727 "2731 Cannot find fabric "
2728 "controller node\n");
2730 lpfc_register_new_vport(phba
, vport
, ndlp
);
2731 mempool_free(mboxq
, phba
->mbox_mem_pool
);
2735 if (phba
->link_flag
& LS_NPIV_FAB_SUPPORTED
)
2736 lpfc_initial_fdisc(vport
);
2738 lpfc_vport_set_state(vport
, FC_VPORT_NO_FABRIC_SUPP
);
2739 lpfc_printf_vlog(vport
, KERN_ERR
, LOG_ELS
,
2740 "2606 No NPIV Fabric support\n");
2742 mempool_free(mboxq
, phba
->mbox_mem_pool
);
2747 * lpfc_issue_init_vpi - Issue init_vpi mailbox command.
2748 * @vport: pointer to lpfc_vport data structure.
2750 * This function issue a init_vpi mailbox command to initialize
2751 * VPI for the vport.
2754 lpfc_issue_init_vpi(struct lpfc_vport
*vport
)
2756 LPFC_MBOXQ_t
*mboxq
;
2759 mboxq
= mempool_alloc(vport
->phba
->mbox_mem_pool
, GFP_KERNEL
);
2761 lpfc_printf_vlog(vport
, KERN_ERR
,
2762 LOG_MBOX
, "2607 Failed to allocate "
2763 "init_vpi mailbox\n");
2766 lpfc_init_vpi(vport
->phba
, mboxq
, vport
->vpi
);
2767 mboxq
->vport
= vport
;
2768 mboxq
->mbox_cmpl
= lpfc_init_vpi_cmpl
;
2769 rc
= lpfc_sli_issue_mbox(vport
->phba
, mboxq
, MBX_NOWAIT
);
2770 if (rc
== MBX_NOT_FINISHED
) {
2771 lpfc_printf_vlog(vport
, KERN_ERR
,
2772 LOG_MBOX
, "2608 Failed to issue init_vpi mailbox\n");
2773 mempool_free(mboxq
, vport
->phba
->mbox_mem_pool
);
2778 * lpfc_start_fdiscs - send fdiscs for each vports on this port.
2779 * @phba: pointer to lpfc hba data structure.
2781 * This function loops through the list of vports on the @phba and issues an
2782 * FDISC if possible.
2785 lpfc_start_fdiscs(struct lpfc_hba
*phba
)
2787 struct lpfc_vport
**vports
;
2790 vports
= lpfc_create_vport_work_array(phba
);
2791 if (vports
!= NULL
) {
2792 for (i
= 0; i
<= phba
->max_vports
&& vports
[i
] != NULL
; i
++) {
2793 if (vports
[i
]->port_type
== LPFC_PHYSICAL_PORT
)
2795 /* There are no vpi for this vport */
2796 if (vports
[i
]->vpi
> phba
->max_vpi
) {
2797 lpfc_vport_set_state(vports
[i
],
2801 if (phba
->fc_topology
== LPFC_TOPOLOGY_LOOP
) {
2802 lpfc_vport_set_state(vports
[i
],
2806 if (vports
[i
]->fc_flag
& FC_VPORT_NEEDS_INIT_VPI
) {
2807 lpfc_issue_init_vpi(vports
[i
]);
2810 if (phba
->link_flag
& LS_NPIV_FAB_SUPPORTED
)
2811 lpfc_initial_fdisc(vports
[i
]);
2813 lpfc_vport_set_state(vports
[i
],
2814 FC_VPORT_NO_FABRIC_SUPP
);
2815 lpfc_printf_vlog(vports
[i
], KERN_ERR
,
2818 "Fabric support\n");
2822 lpfc_destroy_vport_work_array(phba
, vports
);
2826 lpfc_mbx_cmpl_reg_vfi(struct lpfc_hba
*phba
, LPFC_MBOXQ_t
*mboxq
)
2828 struct lpfc_dmabuf
*dmabuf
= mboxq
->context1
;
2829 struct lpfc_vport
*vport
= mboxq
->vport
;
2830 struct Scsi_Host
*shost
= lpfc_shost_from_vport(vport
);
2832 if (mboxq
->u
.mb
.mbxStatus
) {
2833 lpfc_printf_vlog(vport
, KERN_ERR
, LOG_MBOX
,
2834 "2018 REG_VFI mbxStatus error x%x "
2836 mboxq
->u
.mb
.mbxStatus
, vport
->port_state
);
2837 if (phba
->fc_topology
== LPFC_TOPOLOGY_LOOP
) {
2838 /* FLOGI failed, use loop map to make discovery list */
2839 lpfc_disc_list_loopmap(vport
);
2840 /* Start discovery */
2841 lpfc_disc_start(vport
);
2844 lpfc_vport_set_state(vport
, FC_VPORT_FAILED
);
2847 /* The VPI is implicitly registered when the VFI is registered */
2848 spin_lock_irq(shost
->host_lock
);
2849 vport
->vpi_state
|= LPFC_VPI_REGISTERED
;
2850 vport
->fc_flag
|= FC_VFI_REGISTERED
;
2851 vport
->fc_flag
&= ~FC_VPORT_NEEDS_REG_VPI
;
2852 vport
->fc_flag
&= ~FC_VPORT_NEEDS_INIT_VPI
;
2853 spin_unlock_irq(shost
->host_lock
);
2855 if (vport
->port_state
== LPFC_FABRIC_CFG_LINK
) {
2856 /* For private loop just start discovery and we are done. */
2857 if ((phba
->fc_topology
== LPFC_TOPOLOGY_LOOP
) &&
2858 (phba
->alpa_map
[0] == 0) &&
2859 !(vport
->fc_flag
& FC_PUBLIC_LOOP
)) {
2860 /* Use loop map to make discovery list */
2861 lpfc_disc_list_loopmap(vport
);
2862 /* Start discovery */
2863 lpfc_disc_start(vport
);
2865 lpfc_start_fdiscs(phba
);
2866 lpfc_do_scr_ns_plogi(phba
, vport
);
2871 mempool_free(mboxq
, phba
->mbox_mem_pool
);
2872 lpfc_mbuf_free(phba
, dmabuf
->virt
, dmabuf
->phys
);
2878 lpfc_mbx_cmpl_read_sparam(struct lpfc_hba
*phba
, LPFC_MBOXQ_t
*pmb
)
2880 MAILBOX_t
*mb
= &pmb
->u
.mb
;
2881 struct lpfc_dmabuf
*mp
= (struct lpfc_dmabuf
*) pmb
->context1
;
2882 struct lpfc_vport
*vport
= pmb
->vport
;
2885 /* Check for error */
2886 if (mb
->mbxStatus
) {
2887 /* READ_SPARAM mbox error <mbxStatus> state <hba_state> */
2888 lpfc_printf_vlog(vport
, KERN_ERR
, LOG_MBOX
,
2889 "0319 READ_SPARAM mbxStatus error x%x "
2891 mb
->mbxStatus
, vport
->port_state
);
2892 lpfc_linkdown(phba
);
2896 memcpy((uint8_t *) &vport
->fc_sparam
, (uint8_t *) mp
->virt
,
2897 sizeof (struct serv_parm
));
2898 lpfc_update_vport_wwn(vport
);
2899 if (vport
->port_type
== LPFC_PHYSICAL_PORT
) {
2900 memcpy(&phba
->wwnn
, &vport
->fc_nodename
, sizeof(phba
->wwnn
));
2901 memcpy(&phba
->wwpn
, &vport
->fc_portname
, sizeof(phba
->wwnn
));
2904 lpfc_mbuf_free(phba
, mp
->virt
, mp
->phys
);
2906 mempool_free(pmb
, phba
->mbox_mem_pool
);
2910 pmb
->context1
= NULL
;
2911 lpfc_mbuf_free(phba
, mp
->virt
, mp
->phys
);
2913 lpfc_issue_clear_la(phba
, vport
);
2914 mempool_free(pmb
, phba
->mbox_mem_pool
);
2919 lpfc_mbx_process_link_up(struct lpfc_hba
*phba
, struct lpfc_mbx_read_top
*la
)
2921 struct lpfc_vport
*vport
= phba
->pport
;
2922 LPFC_MBOXQ_t
*sparam_mbox
, *cfglink_mbox
= NULL
;
2924 struct lpfc_dmabuf
*mp
;
2926 struct fcf_record
*fcf_record
;
2928 spin_lock_irq(&phba
->hbalock
);
2929 switch (bf_get(lpfc_mbx_read_top_link_spd
, la
)) {
2930 case LPFC_LINK_SPEED_1GHZ
:
2931 case LPFC_LINK_SPEED_2GHZ
:
2932 case LPFC_LINK_SPEED_4GHZ
:
2933 case LPFC_LINK_SPEED_8GHZ
:
2934 case LPFC_LINK_SPEED_10GHZ
:
2935 case LPFC_LINK_SPEED_16GHZ
:
2936 phba
->fc_linkspeed
= bf_get(lpfc_mbx_read_top_link_spd
, la
);
2939 phba
->fc_linkspeed
= LPFC_LINK_SPEED_UNKNOWN
;
2943 phba
->fc_topology
= bf_get(lpfc_mbx_read_top_topology
, la
);
2944 phba
->link_flag
&= ~LS_NPIV_FAB_SUPPORTED
;
2946 if (phba
->fc_topology
== LPFC_TOPOLOGY_LOOP
) {
2947 phba
->sli3_options
&= ~LPFC_SLI3_NPIV_ENABLED
;
2949 /* if npiv is enabled and this adapter supports npiv log
2950 * a message that npiv is not supported in this topology
2952 if (phba
->cfg_enable_npiv
&& phba
->max_vpi
)
2953 lpfc_printf_log(phba
, KERN_ERR
, LOG_LINK_EVENT
,
2954 "1309 Link Up Event npiv not supported in loop "
2956 /* Get Loop Map information */
2957 if (bf_get(lpfc_mbx_read_top_il
, la
))
2958 vport
->fc_flag
|= FC_LBIT
;
2960 vport
->fc_myDID
= bf_get(lpfc_mbx_read_top_alpa_granted
, la
);
2961 i
= la
->lilpBde64
.tus
.f
.bdeSize
;
2964 phba
->alpa_map
[0] = 0;
2966 if (vport
->cfg_log_verbose
& LOG_LINK_EVENT
) {
2977 numalpa
= phba
->alpa_map
[0];
2979 while (j
< numalpa
) {
2980 memset(un
.pamap
, 0, 16);
2981 for (k
= 1; j
< numalpa
; k
++) {
2983 phba
->alpa_map
[j
+ 1];
2988 /* Link Up Event ALPA map */
2989 lpfc_printf_log(phba
,
2992 "1304 Link Up Event "
2993 "ALPA map Data: x%x "
2995 un
.pa
.wd1
, un
.pa
.wd2
,
2996 un
.pa
.wd3
, un
.pa
.wd4
);
3001 if (!(phba
->sli3_options
& LPFC_SLI3_NPIV_ENABLED
)) {
3002 if (phba
->max_vpi
&& phba
->cfg_enable_npiv
&&
3003 (phba
->sli_rev
== 3))
3004 phba
->sli3_options
|= LPFC_SLI3_NPIV_ENABLED
;
3006 vport
->fc_myDID
= phba
->fc_pref_DID
;
3007 vport
->fc_flag
|= FC_LBIT
;
3009 spin_unlock_irq(&phba
->hbalock
);
3012 sparam_mbox
= mempool_alloc(phba
->mbox_mem_pool
, GFP_KERNEL
);
3016 rc
= lpfc_read_sparam(phba
, sparam_mbox
, 0);
3018 mempool_free(sparam_mbox
, phba
->mbox_mem_pool
);
3021 sparam_mbox
->vport
= vport
;
3022 sparam_mbox
->mbox_cmpl
= lpfc_mbx_cmpl_read_sparam
;
3023 rc
= lpfc_sli_issue_mbox(phba
, sparam_mbox
, MBX_NOWAIT
);
3024 if (rc
== MBX_NOT_FINISHED
) {
3025 mp
= (struct lpfc_dmabuf
*) sparam_mbox
->context1
;
3026 lpfc_mbuf_free(phba
, mp
->virt
, mp
->phys
);
3028 mempool_free(sparam_mbox
, phba
->mbox_mem_pool
);
3032 if (!(phba
->hba_flag
& HBA_FCOE_MODE
)) {
3033 cfglink_mbox
= mempool_alloc(phba
->mbox_mem_pool
, GFP_KERNEL
);
3036 vport
->port_state
= LPFC_LOCAL_CFG_LINK
;
3037 lpfc_config_link(phba
, cfglink_mbox
);
3038 cfglink_mbox
->vport
= vport
;
3039 cfglink_mbox
->mbox_cmpl
= lpfc_mbx_cmpl_local_config_link
;
3040 rc
= lpfc_sli_issue_mbox(phba
, cfglink_mbox
, MBX_NOWAIT
);
3041 if (rc
== MBX_NOT_FINISHED
) {
3042 mempool_free(cfglink_mbox
, phba
->mbox_mem_pool
);
3046 vport
->port_state
= LPFC_VPORT_UNKNOWN
;
3048 * Add the driver's default FCF record at FCF index 0 now. This
3049 * is phase 1 implementation that support FCF index 0 and driver
3052 if (!(phba
->hba_flag
& HBA_FIP_SUPPORT
)) {
3053 fcf_record
= kzalloc(sizeof(struct fcf_record
),
3055 if (unlikely(!fcf_record
)) {
3056 lpfc_printf_log(phba
, KERN_ERR
,
3058 "2554 Could not allocate memory for "
3064 lpfc_sli4_build_dflt_fcf_record(phba
, fcf_record
,
3065 LPFC_FCOE_FCF_DEF_INDEX
);
3066 rc
= lpfc_sli4_add_fcf_record(phba
, fcf_record
);
3068 lpfc_printf_log(phba
, KERN_ERR
,
3070 "2013 Could not manually add FCF "
3071 "record 0, status %d\n", rc
);
3079 * The driver is expected to do FIP/FCF. Call the port
3080 * and get the FCF Table.
3082 spin_lock_irq(&phba
->hbalock
);
3083 if (phba
->hba_flag
& FCF_TS_INPROG
) {
3084 spin_unlock_irq(&phba
->hbalock
);
3087 /* This is the initial FCF discovery scan */
3088 phba
->fcf
.fcf_flag
|= FCF_INIT_DISC
;
3089 spin_unlock_irq(&phba
->hbalock
);
3090 lpfc_printf_log(phba
, KERN_INFO
, LOG_FIP
| LOG_DISCOVERY
,
3091 "2778 Start FCF table scan at linkup\n");
3092 rc
= lpfc_sli4_fcf_scan_read_fcf_rec(phba
,
3093 LPFC_FCOE_FCF_GET_FIRST
);
3095 spin_lock_irq(&phba
->hbalock
);
3096 phba
->fcf
.fcf_flag
&= ~FCF_INIT_DISC
;
3097 spin_unlock_irq(&phba
->hbalock
);
3100 /* Reset FCF roundrobin bmask for new discovery */
3101 lpfc_sli4_clear_fcf_rr_bmask(phba
);
3106 lpfc_vport_set_state(vport
, FC_VPORT_FAILED
);
3107 lpfc_printf_vlog(vport
, KERN_ERR
, LOG_MBOX
,
3108 "0263 Discovery Mailbox error: state: 0x%x : %p %p\n",
3109 vport
->port_state
, sparam_mbox
, cfglink_mbox
);
3110 lpfc_issue_clear_la(phba
, vport
);
3115 lpfc_enable_la(struct lpfc_hba
*phba
)
3118 struct lpfc_sli
*psli
= &phba
->sli
;
3119 spin_lock_irq(&phba
->hbalock
);
3120 psli
->sli_flag
|= LPFC_PROCESS_LA
;
3121 if (phba
->sli_rev
<= LPFC_SLI_REV3
) {
3122 control
= readl(phba
->HCregaddr
);
3123 control
|= HC_LAINT_ENA
;
3124 writel(control
, phba
->HCregaddr
);
3125 readl(phba
->HCregaddr
); /* flush */
3127 spin_unlock_irq(&phba
->hbalock
);
3131 lpfc_mbx_issue_link_down(struct lpfc_hba
*phba
)
3133 lpfc_linkdown(phba
);
3134 lpfc_enable_la(phba
);
3135 lpfc_unregister_unused_fcf(phba
);
3136 /* turn on Link Attention interrupts - no CLEAR_LA needed */
3141 * This routine handles processing a READ_TOPOLOGY mailbox
3142 * command upon completion. It is setup in the LPFC_MBOXQ
3143 * as the completion routine when the command is
3144 * handed off to the SLI layer.
3147 lpfc_mbx_cmpl_read_topology(struct lpfc_hba
*phba
, LPFC_MBOXQ_t
*pmb
)
3149 struct lpfc_vport
*vport
= pmb
->vport
;
3150 struct Scsi_Host
*shost
= lpfc_shost_from_vport(vport
);
3151 struct lpfc_mbx_read_top
*la
;
3152 MAILBOX_t
*mb
= &pmb
->u
.mb
;
3153 struct lpfc_dmabuf
*mp
= (struct lpfc_dmabuf
*) (pmb
->context1
);
3155 /* Unblock ELS traffic */
3156 phba
->sli
.ring
[LPFC_ELS_RING
].flag
&= ~LPFC_STOP_IOCB_EVENT
;
3157 /* Check for error */
3158 if (mb
->mbxStatus
) {
3159 lpfc_printf_log(phba
, KERN_INFO
, LOG_LINK_EVENT
,
3160 "1307 READ_LA mbox error x%x state x%x\n",
3161 mb
->mbxStatus
, vport
->port_state
);
3162 lpfc_mbx_issue_link_down(phba
);
3163 phba
->link_state
= LPFC_HBA_ERROR
;
3164 goto lpfc_mbx_cmpl_read_topology_free_mbuf
;
3167 la
= (struct lpfc_mbx_read_top
*) &pmb
->u
.mb
.un
.varReadTop
;
3169 memcpy(&phba
->alpa_map
[0], mp
->virt
, 128);
3171 spin_lock_irq(shost
->host_lock
);
3172 if (bf_get(lpfc_mbx_read_top_pb
, la
))
3173 vport
->fc_flag
|= FC_BYPASSED_MODE
;
3175 vport
->fc_flag
&= ~FC_BYPASSED_MODE
;
3176 spin_unlock_irq(shost
->host_lock
);
3178 if ((phba
->fc_eventTag
< la
->eventTag
) ||
3179 (phba
->fc_eventTag
== la
->eventTag
)) {
3180 phba
->fc_stat
.LinkMultiEvent
++;
3181 if (bf_get(lpfc_mbx_read_top_att_type
, la
) == LPFC_ATT_LINK_UP
)
3182 if (phba
->fc_eventTag
!= 0)
3183 lpfc_linkdown(phba
);
3186 phba
->fc_eventTag
= la
->eventTag
;
3187 spin_lock_irq(&phba
->hbalock
);
3188 if (bf_get(lpfc_mbx_read_top_mm
, la
))
3189 phba
->sli
.sli_flag
|= LPFC_MENLO_MAINT
;
3191 phba
->sli
.sli_flag
&= ~LPFC_MENLO_MAINT
;
3192 spin_unlock_irq(&phba
->hbalock
);
3194 phba
->link_events
++;
3195 if ((bf_get(lpfc_mbx_read_top_att_type
, la
) == LPFC_ATT_LINK_UP
) &&
3196 (!bf_get(lpfc_mbx_read_top_mm
, la
))) {
3197 phba
->fc_stat
.LinkUp
++;
3198 if (phba
->link_flag
& LS_LOOPBACK_MODE
) {
3199 lpfc_printf_log(phba
, KERN_ERR
, LOG_LINK_EVENT
,
3200 "1306 Link Up Event in loop back mode "
3201 "x%x received Data: x%x x%x x%x x%x\n",
3202 la
->eventTag
, phba
->fc_eventTag
,
3203 bf_get(lpfc_mbx_read_top_alpa_granted
,
3205 bf_get(lpfc_mbx_read_top_link_spd
, la
),
3208 lpfc_printf_log(phba
, KERN_ERR
, LOG_LINK_EVENT
,
3209 "1303 Link Up Event x%x received "
3210 "Data: x%x x%x x%x x%x x%x x%x %d\n",
3211 la
->eventTag
, phba
->fc_eventTag
,
3212 bf_get(lpfc_mbx_read_top_alpa_granted
,
3214 bf_get(lpfc_mbx_read_top_link_spd
, la
),
3216 bf_get(lpfc_mbx_read_top_mm
, la
),
3217 bf_get(lpfc_mbx_read_top_fa
, la
),
3218 phba
->wait_4_mlo_maint_flg
);
3220 lpfc_mbx_process_link_up(phba
, la
);
3221 } else if (bf_get(lpfc_mbx_read_top_att_type
, la
) ==
3222 LPFC_ATT_LINK_DOWN
) {
3223 phba
->fc_stat
.LinkDown
++;
3224 if (phba
->link_flag
& LS_LOOPBACK_MODE
) {
3225 lpfc_printf_log(phba
, KERN_ERR
, LOG_LINK_EVENT
,
3226 "1308 Link Down Event in loop back mode "
3228 "Data: x%x x%x x%x\n",
3229 la
->eventTag
, phba
->fc_eventTag
,
3230 phba
->pport
->port_state
, vport
->fc_flag
);
3233 lpfc_printf_log(phba
, KERN_ERR
, LOG_LINK_EVENT
,
3234 "1305 Link Down Event x%x received "
3235 "Data: x%x x%x x%x x%x x%x\n",
3236 la
->eventTag
, phba
->fc_eventTag
,
3237 phba
->pport
->port_state
, vport
->fc_flag
,
3238 bf_get(lpfc_mbx_read_top_mm
, la
),
3239 bf_get(lpfc_mbx_read_top_fa
, la
));
3241 lpfc_mbx_issue_link_down(phba
);
3243 if ((bf_get(lpfc_mbx_read_top_mm
, la
)) &&
3244 (bf_get(lpfc_mbx_read_top_att_type
, la
) == LPFC_ATT_LINK_UP
)) {
3245 if (phba
->link_state
!= LPFC_LINK_DOWN
) {
3246 phba
->fc_stat
.LinkDown
++;
3247 lpfc_printf_log(phba
, KERN_ERR
, LOG_LINK_EVENT
,
3248 "1312 Link Down Event x%x received "
3249 "Data: x%x x%x x%x\n",
3250 la
->eventTag
, phba
->fc_eventTag
,
3251 phba
->pport
->port_state
, vport
->fc_flag
);
3252 lpfc_mbx_issue_link_down(phba
);
3254 lpfc_enable_la(phba
);
3256 lpfc_printf_log(phba
, KERN_ERR
, LOG_LINK_EVENT
,
3257 "1310 Menlo Maint Mode Link up Event x%x rcvd "
3258 "Data: x%x x%x x%x\n",
3259 la
->eventTag
, phba
->fc_eventTag
,
3260 phba
->pport
->port_state
, vport
->fc_flag
);
3262 * The cmnd that triggered this will be waiting for this
3265 /* WAKEUP for MENLO_SET_MODE or MENLO_RESET command. */
3266 if (phba
->wait_4_mlo_maint_flg
) {
3267 phba
->wait_4_mlo_maint_flg
= 0;
3268 wake_up_interruptible(&phba
->wait_4_mlo_m_q
);
3272 if (bf_get(lpfc_mbx_read_top_fa
, la
)) {
3273 if (bf_get(lpfc_mbx_read_top_mm
, la
))
3274 lpfc_issue_clear_la(phba
, vport
);
3275 lpfc_printf_log(phba
, KERN_INFO
, LOG_LINK_EVENT
,
3277 bf_get(lpfc_mbx_read_top_fa
, la
));
3280 lpfc_mbx_cmpl_read_topology_free_mbuf
:
3281 lpfc_mbuf_free(phba
, mp
->virt
, mp
->phys
);
3283 mempool_free(pmb
, phba
->mbox_mem_pool
);
3288 * This routine handles processing a REG_LOGIN mailbox
3289 * command upon completion. It is setup in the LPFC_MBOXQ
3290 * as the completion routine when the command is
3291 * handed off to the SLI layer.
3294 lpfc_mbx_cmpl_reg_login(struct lpfc_hba
*phba
, LPFC_MBOXQ_t
*pmb
)
3296 struct lpfc_vport
*vport
= pmb
->vport
;
3297 struct lpfc_dmabuf
*mp
= (struct lpfc_dmabuf
*) (pmb
->context1
);
3298 struct lpfc_nodelist
*ndlp
= (struct lpfc_nodelist
*) pmb
->context2
;
3299 struct Scsi_Host
*shost
= lpfc_shost_from_vport(vport
);
3301 pmb
->context1
= NULL
;
3302 pmb
->context2
= NULL
;
3304 if (ndlp
->nlp_flag
& NLP_REG_LOGIN_SEND
)
3305 ndlp
->nlp_flag
&= ~NLP_REG_LOGIN_SEND
;
3307 if (ndlp
->nlp_flag
& NLP_IGNR_REG_CMPL
||
3308 ndlp
->nlp_state
!= NLP_STE_REG_LOGIN_ISSUE
) {
3309 /* We rcvd a rscn after issuing this
3310 * mbox reg login, we may have cycled
3311 * back through the state and be
3312 * back at reg login state so this
3313 * mbox needs to be ignored becase
3314 * there is another reg login in
3317 spin_lock_irq(shost
->host_lock
);
3318 ndlp
->nlp_flag
&= ~NLP_IGNR_REG_CMPL
;
3319 spin_unlock_irq(shost
->host_lock
);
3321 /* Good status, call state machine */
3322 lpfc_disc_state_machine(vport
, ndlp
, pmb
,
3323 NLP_EVT_CMPL_REG_LOGIN
);
3325 lpfc_mbuf_free(phba
, mp
->virt
, mp
->phys
);
3327 mempool_free(pmb
, phba
->mbox_mem_pool
);
3328 /* decrement the node reference count held for this callback
3337 lpfc_mbx_cmpl_unreg_vpi(struct lpfc_hba
*phba
, LPFC_MBOXQ_t
*pmb
)
3339 MAILBOX_t
*mb
= &pmb
->u
.mb
;
3340 struct lpfc_vport
*vport
= pmb
->vport
;
3341 struct Scsi_Host
*shost
= lpfc_shost_from_vport(vport
);
3343 switch (mb
->mbxStatus
) {
3346 lpfc_printf_vlog(vport
, KERN_INFO
, LOG_NODE
,
3347 "0911 cmpl_unreg_vpi, mb status = 0x%x\n",
3350 /* If VPI is busy, reset the HBA */
3352 lpfc_printf_vlog(vport
, KERN_ERR
, LOG_NODE
,
3353 "2798 Unreg_vpi failed vpi 0x%x, mb status = 0x%x\n",
3354 vport
->vpi
, mb
->mbxStatus
);
3355 if (!(phba
->pport
->load_flag
& FC_UNLOADING
))
3356 lpfc_workq_post_event(phba
, NULL
, NULL
,
3357 LPFC_EVT_RESET_HBA
);
3359 spin_lock_irq(shost
->host_lock
);
3360 vport
->vpi_state
&= ~LPFC_VPI_REGISTERED
;
3361 vport
->fc_flag
|= FC_VPORT_NEEDS_REG_VPI
;
3362 spin_unlock_irq(shost
->host_lock
);
3363 vport
->unreg_vpi_cmpl
= VPORT_OK
;
3364 mempool_free(pmb
, phba
->mbox_mem_pool
);
3365 lpfc_cleanup_vports_rrqs(vport
, NULL
);
3367 * This shost reference might have been taken at the beginning of
3368 * lpfc_vport_delete()
3370 if ((vport
->load_flag
& FC_UNLOADING
) && (vport
!= phba
->pport
))
3371 scsi_host_put(shost
);
3375 lpfc_mbx_unreg_vpi(struct lpfc_vport
*vport
)
3377 struct lpfc_hba
*phba
= vport
->phba
;
3381 mbox
= mempool_alloc(phba
->mbox_mem_pool
, GFP_KERNEL
);
3385 lpfc_unreg_vpi(phba
, vport
->vpi
, mbox
);
3386 mbox
->vport
= vport
;
3387 mbox
->mbox_cmpl
= lpfc_mbx_cmpl_unreg_vpi
;
3388 rc
= lpfc_sli_issue_mbox(phba
, mbox
, MBX_NOWAIT
);
3389 if (rc
== MBX_NOT_FINISHED
) {
3390 lpfc_printf_vlog(vport
, KERN_ERR
, LOG_MBOX
| LOG_VPORT
,
3391 "1800 Could not issue unreg_vpi\n");
3392 mempool_free(mbox
, phba
->mbox_mem_pool
);
3393 vport
->unreg_vpi_cmpl
= VPORT_ERROR
;
3400 lpfc_mbx_cmpl_reg_vpi(struct lpfc_hba
*phba
, LPFC_MBOXQ_t
*pmb
)
3402 struct lpfc_vport
*vport
= pmb
->vport
;
3403 struct Scsi_Host
*shost
= lpfc_shost_from_vport(vport
);
3404 MAILBOX_t
*mb
= &pmb
->u
.mb
;
3406 switch (mb
->mbxStatus
) {
3410 lpfc_printf_vlog(vport
, KERN_INFO
, LOG_NODE
,
3411 "0912 cmpl_reg_vpi, mb status = 0x%x\n",
3413 lpfc_vport_set_state(vport
, FC_VPORT_FAILED
);
3414 spin_lock_irq(shost
->host_lock
);
3415 vport
->fc_flag
&= ~(FC_FABRIC
| FC_PUBLIC_LOOP
);
3416 spin_unlock_irq(shost
->host_lock
);
3417 vport
->fc_myDID
= 0;
3421 spin_lock_irq(shost
->host_lock
);
3422 vport
->vpi_state
|= LPFC_VPI_REGISTERED
;
3423 vport
->fc_flag
&= ~FC_VPORT_NEEDS_REG_VPI
;
3424 spin_unlock_irq(shost
->host_lock
);
3425 vport
->num_disc_nodes
= 0;
3426 /* go thru NPR list and issue ELS PLOGIs */
3427 if (vport
->fc_npr_cnt
)
3428 lpfc_els_disc_plogi(vport
);
3430 if (!vport
->num_disc_nodes
) {
3431 spin_lock_irq(shost
->host_lock
);
3432 vport
->fc_flag
&= ~FC_NDISC_ACTIVE
;
3433 spin_unlock_irq(shost
->host_lock
);
3434 lpfc_can_disctmo(vport
);
3436 vport
->port_state
= LPFC_VPORT_READY
;
3439 mempool_free(pmb
, phba
->mbox_mem_pool
);
3444 * lpfc_create_static_vport - Read HBA config region to create static vports.
3445 * @phba: pointer to lpfc hba data structure.
3447 * This routine issue a DUMP mailbox command for config region 22 to get
3448 * the list of static vports to be created. The function create vports
3449 * based on the information returned from the HBA.
3452 lpfc_create_static_vport(struct lpfc_hba
*phba
)
3454 LPFC_MBOXQ_t
*pmb
= NULL
;
3456 struct static_vport_info
*vport_info
;
3458 struct fc_vport_identifiers vport_id
;
3459 struct fc_vport
*new_fc_vport
;
3460 struct Scsi_Host
*shost
;
3461 struct lpfc_vport
*vport
;
3462 uint16_t offset
= 0;
3463 uint8_t *vport_buff
;
3464 struct lpfc_dmabuf
*mp
;
3465 uint32_t byte_count
= 0;
3467 pmb
= mempool_alloc(phba
->mbox_mem_pool
, GFP_KERNEL
);
3469 lpfc_printf_log(phba
, KERN_ERR
, LOG_INIT
,
3470 "0542 lpfc_create_static_vport failed to"
3471 " allocate mailbox memory\n");
3477 vport_info
= kzalloc(sizeof(struct static_vport_info
), GFP_KERNEL
);
3479 lpfc_printf_log(phba
, KERN_ERR
, LOG_INIT
,
3480 "0543 lpfc_create_static_vport failed to"
3481 " allocate vport_info\n");
3482 mempool_free(pmb
, phba
->mbox_mem_pool
);
3486 vport_buff
= (uint8_t *) vport_info
;
3488 if (lpfc_dump_static_vport(phba
, pmb
, offset
))
3491 pmb
->vport
= phba
->pport
;
3492 rc
= lpfc_sli_issue_mbox_wait(phba
, pmb
, LPFC_MBOX_TMO
);
3494 if ((rc
!= MBX_SUCCESS
) || mb
->mbxStatus
) {
3495 lpfc_printf_log(phba
, KERN_WARNING
, LOG_INIT
,
3496 "0544 lpfc_create_static_vport failed to"
3497 " issue dump mailbox command ret 0x%x "
3503 if (phba
->sli_rev
== LPFC_SLI_REV4
) {
3504 byte_count
= pmb
->u
.mqe
.un
.mb_words
[5];
3505 mp
= (struct lpfc_dmabuf
*) pmb
->context2
;
3506 if (byte_count
> sizeof(struct static_vport_info
) -
3508 byte_count
= sizeof(struct static_vport_info
)
3510 memcpy(vport_buff
+ offset
, mp
->virt
, byte_count
);
3511 offset
+= byte_count
;
3513 if (mb
->un
.varDmp
.word_cnt
>
3514 sizeof(struct static_vport_info
) - offset
)
3515 mb
->un
.varDmp
.word_cnt
=
3516 sizeof(struct static_vport_info
)
3518 byte_count
= mb
->un
.varDmp
.word_cnt
;
3519 lpfc_sli_pcimem_bcopy(((uint8_t *)mb
) + DMP_RSP_OFFSET
,
3520 vport_buff
+ offset
,
3523 offset
+= byte_count
;
3526 } while (byte_count
&&
3527 offset
< sizeof(struct static_vport_info
));
3530 if ((le32_to_cpu(vport_info
->signature
) != VPORT_INFO_SIG
) ||
3531 ((le32_to_cpu(vport_info
->rev
) & VPORT_INFO_REV_MASK
)
3532 != VPORT_INFO_REV
)) {
3533 lpfc_printf_log(phba
, KERN_ERR
, LOG_INIT
,
3534 "0545 lpfc_create_static_vport bad"
3535 " information header 0x%x 0x%x\n",
3536 le32_to_cpu(vport_info
->signature
),
3537 le32_to_cpu(vport_info
->rev
) & VPORT_INFO_REV_MASK
);
3542 shost
= lpfc_shost_from_vport(phba
->pport
);
3544 for (i
= 0; i
< MAX_STATIC_VPORT_COUNT
; i
++) {
3545 memset(&vport_id
, 0, sizeof(vport_id
));
3546 vport_id
.port_name
= wwn_to_u64(vport_info
->vport_list
[i
].wwpn
);
3547 vport_id
.node_name
= wwn_to_u64(vport_info
->vport_list
[i
].wwnn
);
3548 if (!vport_id
.port_name
|| !vport_id
.node_name
)
3551 vport_id
.roles
= FC_PORT_ROLE_FCP_INITIATOR
;
3552 vport_id
.vport_type
= FC_PORTTYPE_NPIV
;
3553 vport_id
.disable
= false;
3554 new_fc_vport
= fc_vport_create(shost
, 0, &vport_id
);
3556 if (!new_fc_vport
) {
3557 lpfc_printf_log(phba
, KERN_WARNING
, LOG_INIT
,
3558 "0546 lpfc_create_static_vport failed to"
3563 vport
= *(struct lpfc_vport
**)new_fc_vport
->dd_data
;
3564 vport
->vport_flag
|= STATIC_VPORT
;
3569 if (rc
!= MBX_TIMEOUT
) {
3570 if (pmb
->context2
) {
3571 mp
= (struct lpfc_dmabuf
*) pmb
->context2
;
3572 lpfc_mbuf_free(phba
, mp
->virt
, mp
->phys
);
3575 mempool_free(pmb
, phba
->mbox_mem_pool
);
3582 * This routine handles processing a Fabric REG_LOGIN mailbox
3583 * command upon completion. It is setup in the LPFC_MBOXQ
3584 * as the completion routine when the command is
3585 * handed off to the SLI layer.
3588 lpfc_mbx_cmpl_fabric_reg_login(struct lpfc_hba
*phba
, LPFC_MBOXQ_t
*pmb
)
3590 struct lpfc_vport
*vport
= pmb
->vport
;
3591 MAILBOX_t
*mb
= &pmb
->u
.mb
;
3592 struct lpfc_dmabuf
*mp
= (struct lpfc_dmabuf
*) (pmb
->context1
);
3593 struct lpfc_nodelist
*ndlp
;
3595 ndlp
= (struct lpfc_nodelist
*) pmb
->context2
;
3596 pmb
->context1
= NULL
;
3597 pmb
->context2
= NULL
;
3599 if (mb
->mbxStatus
) {
3600 lpfc_printf_vlog(vport
, KERN_ERR
, LOG_MBOX
,
3601 "0258 Register Fabric login error: 0x%x\n",
3603 lpfc_mbuf_free(phba
, mp
->virt
, mp
->phys
);
3605 mempool_free(pmb
, phba
->mbox_mem_pool
);
3607 if (phba
->fc_topology
== LPFC_TOPOLOGY_LOOP
) {
3608 /* FLOGI failed, use loop map to make discovery list */
3609 lpfc_disc_list_loopmap(vport
);
3611 /* Start discovery */
3612 lpfc_disc_start(vport
);
3613 /* Decrement the reference count to ndlp after the
3614 * reference to the ndlp are done.
3620 lpfc_vport_set_state(vport
, FC_VPORT_FAILED
);
3621 /* Decrement the reference count to ndlp after the reference
3622 * to the ndlp are done.
3628 if (phba
->sli_rev
< LPFC_SLI_REV4
)
3629 ndlp
->nlp_rpi
= mb
->un
.varWords
[0];
3630 ndlp
->nlp_flag
|= NLP_RPI_REGISTERED
;
3631 ndlp
->nlp_type
|= NLP_FABRIC
;
3632 lpfc_nlp_set_state(vport
, ndlp
, NLP_STE_UNMAPPED_NODE
);
3634 if (vport
->port_state
== LPFC_FABRIC_CFG_LINK
) {
3635 /* when physical port receive logo donot start
3636 * vport discovery */
3637 if (!(vport
->fc_flag
& FC_LOGO_RCVD_DID_CHNG
))
3638 lpfc_start_fdiscs(phba
);
3640 vport
->fc_flag
&= ~FC_LOGO_RCVD_DID_CHNG
;
3641 lpfc_do_scr_ns_plogi(phba
, vport
);
3644 lpfc_mbuf_free(phba
, mp
->virt
, mp
->phys
);
3646 mempool_free(pmb
, phba
->mbox_mem_pool
);
3648 /* Drop the reference count from the mbox at the end after
3649 * all the current reference to the ndlp have been done.
3656 * This routine handles processing a NameServer REG_LOGIN mailbox
3657 * command upon completion. It is setup in the LPFC_MBOXQ
3658 * as the completion routine when the command is
3659 * handed off to the SLI layer.
3662 lpfc_mbx_cmpl_ns_reg_login(struct lpfc_hba
*phba
, LPFC_MBOXQ_t
*pmb
)
3664 MAILBOX_t
*mb
= &pmb
->u
.mb
;
3665 struct lpfc_dmabuf
*mp
= (struct lpfc_dmabuf
*) (pmb
->context1
);
3666 struct lpfc_nodelist
*ndlp
= (struct lpfc_nodelist
*) pmb
->context2
;
3667 struct lpfc_vport
*vport
= pmb
->vport
;
3669 pmb
->context1
= NULL
;
3670 pmb
->context2
= NULL
;
3672 if (mb
->mbxStatus
) {
3674 lpfc_printf_vlog(vport
, KERN_ERR
, LOG_ELS
,
3675 "0260 Register NameServer error: 0x%x\n",
3677 /* decrement the node reference count held for this
3678 * callback function.
3681 lpfc_mbuf_free(phba
, mp
->virt
, mp
->phys
);
3683 mempool_free(pmb
, phba
->mbox_mem_pool
);
3685 /* If no other thread is using the ndlp, free it */
3686 lpfc_nlp_not_used(ndlp
);
3688 if (phba
->fc_topology
== LPFC_TOPOLOGY_LOOP
) {
3690 * RegLogin failed, use loop map to make discovery
3693 lpfc_disc_list_loopmap(vport
);
3695 /* Start discovery */
3696 lpfc_disc_start(vport
);
3699 lpfc_vport_set_state(vport
, FC_VPORT_FAILED
);
3703 if (phba
->sli_rev
< LPFC_SLI_REV4
)
3704 ndlp
->nlp_rpi
= mb
->un
.varWords
[0];
3705 ndlp
->nlp_flag
|= NLP_RPI_REGISTERED
;
3706 ndlp
->nlp_type
|= NLP_FABRIC
;
3707 lpfc_nlp_set_state(vport
, ndlp
, NLP_STE_UNMAPPED_NODE
);
3709 if (vport
->port_state
< LPFC_VPORT_READY
) {
3710 /* Link up discovery requires Fabric registration. */
3711 lpfc_ns_cmd(vport
, SLI_CTNS_RFF_ID
, 0, 0); /* Do this first! */
3712 lpfc_ns_cmd(vport
, SLI_CTNS_RNN_ID
, 0, 0);
3713 lpfc_ns_cmd(vport
, SLI_CTNS_RSNN_NN
, 0, 0);
3714 lpfc_ns_cmd(vport
, SLI_CTNS_RSPN_ID
, 0, 0);
3715 lpfc_ns_cmd(vport
, SLI_CTNS_RFT_ID
, 0, 0);
3717 /* Issue SCR just before NameServer GID_FT Query */
3718 lpfc_issue_els_scr(vport
, SCR_DID
, 0);
3721 vport
->fc_ns_retry
= 0;
3722 /* Good status, issue CT Request to NameServer */
3723 if (lpfc_ns_cmd(vport
, SLI_CTNS_GID_FT
, 0, 0)) {
3724 /* Cannot issue NameServer Query, so finish up discovery */
3728 /* decrement the node reference count held for this
3729 * callback function.
3732 lpfc_mbuf_free(phba
, mp
->virt
, mp
->phys
);
3734 mempool_free(pmb
, phba
->mbox_mem_pool
);
3740 lpfc_register_remote_port(struct lpfc_vport
*vport
, struct lpfc_nodelist
*ndlp
)
3742 struct Scsi_Host
*shost
= lpfc_shost_from_vport(vport
);
3743 struct fc_rport
*rport
;
3744 struct lpfc_rport_data
*rdata
;
3745 struct fc_rport_identifiers rport_ids
;
3746 struct lpfc_hba
*phba
= vport
->phba
;
3748 /* Remote port has reappeared. Re-register w/ FC transport */
3749 rport_ids
.node_name
= wwn_to_u64(ndlp
->nlp_nodename
.u
.wwn
);
3750 rport_ids
.port_name
= wwn_to_u64(ndlp
->nlp_portname
.u
.wwn
);
3751 rport_ids
.port_id
= ndlp
->nlp_DID
;
3752 rport_ids
.roles
= FC_RPORT_ROLE_UNKNOWN
;
3755 * We leave our node pointer in rport->dd_data when we unregister a
3756 * FCP target port. But fc_remote_port_add zeros the space to which
3757 * rport->dd_data points. So, if we're reusing a previously
3758 * registered port, drop the reference that we took the last time we
3759 * registered the port.
3761 if (ndlp
->rport
&& ndlp
->rport
->dd_data
&&
3762 ((struct lpfc_rport_data
*) ndlp
->rport
->dd_data
)->pnode
== ndlp
)
3765 lpfc_debugfs_disc_trc(vport
, LPFC_DISC_TRC_RPORT
,
3766 "rport add: did:x%x flg:x%x type x%x",
3767 ndlp
->nlp_DID
, ndlp
->nlp_flag
, ndlp
->nlp_type
);
3769 /* Don't add the remote port if unloading. */
3770 if (vport
->load_flag
& FC_UNLOADING
)
3773 ndlp
->rport
= rport
= fc_remote_port_add(shost
, 0, &rport_ids
);
3774 if (!rport
|| !get_device(&rport
->dev
)) {
3775 dev_printk(KERN_WARNING
, &phba
->pcidev
->dev
,
3776 "Warning: fc_remote_port_add failed\n");
3780 /* initialize static port data */
3781 rport
->maxframe_size
= ndlp
->nlp_maxframe
;
3782 rport
->supported_classes
= ndlp
->nlp_class_sup
;
3783 rdata
= rport
->dd_data
;
3784 rdata
->pnode
= lpfc_nlp_get(ndlp
);
3786 if (ndlp
->nlp_type
& NLP_FCP_TARGET
)
3787 rport_ids
.roles
|= FC_RPORT_ROLE_FCP_TARGET
;
3788 if (ndlp
->nlp_type
& NLP_FCP_INITIATOR
)
3789 rport_ids
.roles
|= FC_RPORT_ROLE_FCP_INITIATOR
;
3791 if (rport_ids
.roles
!= FC_RPORT_ROLE_UNKNOWN
)
3792 fc_remote_port_rolechg(rport
, rport_ids
.roles
);
3794 if ((rport
->scsi_target_id
!= -1) &&
3795 (rport
->scsi_target_id
< LPFC_MAX_TARGET
)) {
3796 ndlp
->nlp_sid
= rport
->scsi_target_id
;
3802 lpfc_unregister_remote_port(struct lpfc_nodelist
*ndlp
)
3804 struct fc_rport
*rport
= ndlp
->rport
;
3806 lpfc_debugfs_disc_trc(ndlp
->vport
, LPFC_DISC_TRC_RPORT
,
3807 "rport delete: did:x%x flg:x%x type x%x",
3808 ndlp
->nlp_DID
, ndlp
->nlp_flag
, ndlp
->nlp_type
);
3810 fc_remote_port_delete(rport
);
3816 lpfc_nlp_counters(struct lpfc_vport
*vport
, int state
, int count
)
3818 struct Scsi_Host
*shost
= lpfc_shost_from_vport(vport
);
3820 spin_lock_irq(shost
->host_lock
);
3822 case NLP_STE_UNUSED_NODE
:
3823 vport
->fc_unused_cnt
+= count
;
3825 case NLP_STE_PLOGI_ISSUE
:
3826 vport
->fc_plogi_cnt
+= count
;
3828 case NLP_STE_ADISC_ISSUE
:
3829 vport
->fc_adisc_cnt
+= count
;
3831 case NLP_STE_REG_LOGIN_ISSUE
:
3832 vport
->fc_reglogin_cnt
+= count
;
3834 case NLP_STE_PRLI_ISSUE
:
3835 vport
->fc_prli_cnt
+= count
;
3837 case NLP_STE_UNMAPPED_NODE
:
3838 vport
->fc_unmap_cnt
+= count
;
3840 case NLP_STE_MAPPED_NODE
:
3841 vport
->fc_map_cnt
+= count
;
3843 case NLP_STE_NPR_NODE
:
3844 vport
->fc_npr_cnt
+= count
;
3847 spin_unlock_irq(shost
->host_lock
);
3851 lpfc_nlp_state_cleanup(struct lpfc_vport
*vport
, struct lpfc_nodelist
*ndlp
,
3852 int old_state
, int new_state
)
3854 struct Scsi_Host
*shost
= lpfc_shost_from_vport(vport
);
3856 if (new_state
== NLP_STE_UNMAPPED_NODE
) {
3857 ndlp
->nlp_flag
&= ~NLP_NODEV_REMOVE
;
3858 ndlp
->nlp_type
|= NLP_FC_NODE
;
3860 if (new_state
== NLP_STE_MAPPED_NODE
)
3861 ndlp
->nlp_flag
&= ~NLP_NODEV_REMOVE
;
3862 if (new_state
== NLP_STE_NPR_NODE
)
3863 ndlp
->nlp_flag
&= ~NLP_RCV_PLOGI
;
3865 /* Transport interface */
3866 if (ndlp
->rport
&& (old_state
== NLP_STE_MAPPED_NODE
||
3867 old_state
== NLP_STE_UNMAPPED_NODE
)) {
3868 vport
->phba
->nport_event_cnt
++;
3869 lpfc_unregister_remote_port(ndlp
);
3872 if (new_state
== NLP_STE_MAPPED_NODE
||
3873 new_state
== NLP_STE_UNMAPPED_NODE
) {
3874 vport
->phba
->nport_event_cnt
++;
3876 * Tell the fc transport about the port, if we haven't
3877 * already. If we have, and it's a scsi entity, be
3878 * sure to unblock any attached scsi devices
3880 lpfc_register_remote_port(vport
, ndlp
);
3882 if ((new_state
== NLP_STE_MAPPED_NODE
) &&
3883 (vport
->stat_data_enabled
)) {
3885 * A new target is discovered, if there is no buffer for
3886 * statistical data collection allocate buffer.
3888 ndlp
->lat_data
= kcalloc(LPFC_MAX_BUCKET_COUNT
,
3889 sizeof(struct lpfc_scsicmd_bkt
),
3892 if (!ndlp
->lat_data
)
3893 lpfc_printf_vlog(vport
, KERN_ERR
, LOG_NODE
,
3894 "0286 lpfc_nlp_state_cleanup failed to "
3895 "allocate statistical data buffer DID "
3896 "0x%x\n", ndlp
->nlp_DID
);
3899 * if we added to Mapped list, but the remote port
3900 * registration failed or assigned a target id outside
3901 * our presentable range - move the node to the
3904 if (new_state
== NLP_STE_MAPPED_NODE
&&
3906 ndlp
->rport
->scsi_target_id
== -1 ||
3907 ndlp
->rport
->scsi_target_id
>= LPFC_MAX_TARGET
)) {
3908 spin_lock_irq(shost
->host_lock
);
3909 ndlp
->nlp_flag
|= NLP_TGT_NO_SCSIID
;
3910 spin_unlock_irq(shost
->host_lock
);
3911 lpfc_nlp_set_state(vport
, ndlp
, NLP_STE_UNMAPPED_NODE
);
3916 lpfc_nlp_state_name(char *buffer
, size_t size
, int state
)
3918 static char *states
[] = {
3919 [NLP_STE_UNUSED_NODE
] = "UNUSED",
3920 [NLP_STE_PLOGI_ISSUE
] = "PLOGI",
3921 [NLP_STE_ADISC_ISSUE
] = "ADISC",
3922 [NLP_STE_REG_LOGIN_ISSUE
] = "REGLOGIN",
3923 [NLP_STE_PRLI_ISSUE
] = "PRLI",
3924 [NLP_STE_UNMAPPED_NODE
] = "UNMAPPED",
3925 [NLP_STE_MAPPED_NODE
] = "MAPPED",
3926 [NLP_STE_NPR_NODE
] = "NPR",
3929 if (state
< NLP_STE_MAX_STATE
&& states
[state
])
3930 strlcpy(buffer
, states
[state
], size
);
3932 snprintf(buffer
, size
, "unknown (%d)", state
);
3937 lpfc_nlp_set_state(struct lpfc_vport
*vport
, struct lpfc_nodelist
*ndlp
,
3940 struct Scsi_Host
*shost
= lpfc_shost_from_vport(vport
);
3941 int old_state
= ndlp
->nlp_state
;
3942 char name1
[16], name2
[16];
3944 lpfc_printf_vlog(vport
, KERN_INFO
, LOG_NODE
,
3945 "0904 NPort state transition x%06x, %s -> %s\n",
3947 lpfc_nlp_state_name(name1
, sizeof(name1
), old_state
),
3948 lpfc_nlp_state_name(name2
, sizeof(name2
), state
));
3950 lpfc_debugfs_disc_trc(vport
, LPFC_DISC_TRC_NODE
,
3951 "node statechg did:x%x old:%d ste:%d",
3952 ndlp
->nlp_DID
, old_state
, state
);
3954 if (old_state
== NLP_STE_NPR_NODE
&&
3955 state
!= NLP_STE_NPR_NODE
)
3956 lpfc_cancel_retry_delay_tmo(vport
, ndlp
);
3957 if (old_state
== NLP_STE_UNMAPPED_NODE
) {
3958 ndlp
->nlp_flag
&= ~NLP_TGT_NO_SCSIID
;
3959 ndlp
->nlp_type
&= ~NLP_FC_NODE
;
3962 if (list_empty(&ndlp
->nlp_listp
)) {
3963 spin_lock_irq(shost
->host_lock
);
3964 list_add_tail(&ndlp
->nlp_listp
, &vport
->fc_nodes
);
3965 spin_unlock_irq(shost
->host_lock
);
3966 } else if (old_state
)
3967 lpfc_nlp_counters(vport
, old_state
, -1);
3969 ndlp
->nlp_state
= state
;
3970 lpfc_nlp_counters(vport
, state
, 1);
3971 lpfc_nlp_state_cleanup(vport
, ndlp
, old_state
, state
);
3975 lpfc_enqueue_node(struct lpfc_vport
*vport
, struct lpfc_nodelist
*ndlp
)
3977 struct Scsi_Host
*shost
= lpfc_shost_from_vport(vport
);
3979 if (list_empty(&ndlp
->nlp_listp
)) {
3980 spin_lock_irq(shost
->host_lock
);
3981 list_add_tail(&ndlp
->nlp_listp
, &vport
->fc_nodes
);
3982 spin_unlock_irq(shost
->host_lock
);
3987 lpfc_dequeue_node(struct lpfc_vport
*vport
, struct lpfc_nodelist
*ndlp
)
3989 struct Scsi_Host
*shost
= lpfc_shost_from_vport(vport
);
3991 lpfc_cancel_retry_delay_tmo(vport
, ndlp
);
3992 if (ndlp
->nlp_state
&& !list_empty(&ndlp
->nlp_listp
))
3993 lpfc_nlp_counters(vport
, ndlp
->nlp_state
, -1);
3994 spin_lock_irq(shost
->host_lock
);
3995 list_del_init(&ndlp
->nlp_listp
);
3996 spin_unlock_irq(shost
->host_lock
);
3997 lpfc_nlp_state_cleanup(vport
, ndlp
, ndlp
->nlp_state
,
3998 NLP_STE_UNUSED_NODE
);
4002 lpfc_disable_node(struct lpfc_vport
*vport
, struct lpfc_nodelist
*ndlp
)
4004 lpfc_cancel_retry_delay_tmo(vport
, ndlp
);
4005 if (ndlp
->nlp_state
&& !list_empty(&ndlp
->nlp_listp
))
4006 lpfc_nlp_counters(vport
, ndlp
->nlp_state
, -1);
4007 lpfc_nlp_state_cleanup(vport
, ndlp
, ndlp
->nlp_state
,
4008 NLP_STE_UNUSED_NODE
);
4011 * lpfc_initialize_node - Initialize all fields of node object
4012 * @vport: Pointer to Virtual Port object.
4013 * @ndlp: Pointer to FC node object.
4014 * @did: FC_ID of the node.
4016 * This function is always called when node object need to be initialized.
4017 * It initializes all the fields of the node object. Although the reference
4018 * to phba from @ndlp can be obtained indirectly through it's reference to
4019 * @vport, a direct reference to phba is taken here by @ndlp. This is due
4020 * to the life-span of the @ndlp might go beyond the existence of @vport as
4021 * the final release of ndlp is determined by its reference count. And, the
4022 * operation on @ndlp needs the reference to phba.
4025 lpfc_initialize_node(struct lpfc_vport
*vport
, struct lpfc_nodelist
*ndlp
,
4028 INIT_LIST_HEAD(&ndlp
->els_retry_evt
.evt_listp
);
4029 INIT_LIST_HEAD(&ndlp
->dev_loss_evt
.evt_listp
);
4030 init_timer(&ndlp
->nlp_delayfunc
);
4031 ndlp
->nlp_delayfunc
.function
= lpfc_els_retry_delay
;
4032 ndlp
->nlp_delayfunc
.data
= (unsigned long)ndlp
;
4033 ndlp
->nlp_DID
= did
;
4034 ndlp
->vport
= vport
;
4035 ndlp
->phba
= vport
->phba
;
4036 ndlp
->nlp_sid
= NLP_NO_SID
;
4037 kref_init(&ndlp
->kref
);
4038 NLP_INT_NODE_ACT(ndlp
);
4039 atomic_set(&ndlp
->cmd_pending
, 0);
4040 ndlp
->cmd_qdepth
= vport
->cfg_tgt_queue_depth
;
4041 if (vport
->phba
->sli_rev
== LPFC_SLI_REV4
)
4042 ndlp
->nlp_rpi
= lpfc_sli4_alloc_rpi(vport
->phba
);
4045 struct lpfc_nodelist
*
4046 lpfc_enable_node(struct lpfc_vport
*vport
, struct lpfc_nodelist
*ndlp
,
4049 struct lpfc_hba
*phba
= vport
->phba
;
4051 unsigned long flags
;
4056 spin_lock_irqsave(&phba
->ndlp_lock
, flags
);
4057 /* The ndlp should not be in memory free mode */
4058 if (NLP_CHK_FREE_REQ(ndlp
)) {
4059 spin_unlock_irqrestore(&phba
->ndlp_lock
, flags
);
4060 lpfc_printf_vlog(vport
, KERN_WARNING
, LOG_NODE
,
4061 "0277 lpfc_enable_node: ndlp:x%p "
4062 "usgmap:x%x refcnt:%d\n",
4063 (void *)ndlp
, ndlp
->nlp_usg_map
,
4064 atomic_read(&ndlp
->kref
.refcount
));
4067 /* The ndlp should not already be in active mode */
4068 if (NLP_CHK_NODE_ACT(ndlp
)) {
4069 spin_unlock_irqrestore(&phba
->ndlp_lock
, flags
);
4070 lpfc_printf_vlog(vport
, KERN_WARNING
, LOG_NODE
,
4071 "0278 lpfc_enable_node: ndlp:x%p "
4072 "usgmap:x%x refcnt:%d\n",
4073 (void *)ndlp
, ndlp
->nlp_usg_map
,
4074 atomic_read(&ndlp
->kref
.refcount
));
4078 /* Keep the original DID */
4079 did
= ndlp
->nlp_DID
;
4081 /* re-initialize ndlp except of ndlp linked list pointer */
4082 memset((((char *)ndlp
) + sizeof (struct list_head
)), 0,
4083 sizeof (struct lpfc_nodelist
) - sizeof (struct list_head
));
4084 lpfc_initialize_node(vport
, ndlp
, did
);
4086 spin_unlock_irqrestore(&phba
->ndlp_lock
, flags
);
4088 if (state
!= NLP_STE_UNUSED_NODE
)
4089 lpfc_nlp_set_state(vport
, ndlp
, state
);
4091 lpfc_debugfs_disc_trc(vport
, LPFC_DISC_TRC_NODE
,
4092 "node enable: did:x%x",
4093 ndlp
->nlp_DID
, 0, 0);
4098 lpfc_drop_node(struct lpfc_vport
*vport
, struct lpfc_nodelist
*ndlp
)
4101 * Use of lpfc_drop_node and UNUSED list: lpfc_drop_node should
4102 * be used if we wish to issue the "last" lpfc_nlp_put() to remove
4103 * the ndlp from the vport. The ndlp marked as UNUSED on the list
4104 * until ALL other outstanding threads have completed. We check
4105 * that the ndlp not already in the UNUSED state before we proceed.
4107 if (ndlp
->nlp_state
== NLP_STE_UNUSED_NODE
)
4109 lpfc_nlp_set_state(vport
, ndlp
, NLP_STE_UNUSED_NODE
);
4110 if (vport
->phba
->sli_rev
== LPFC_SLI_REV4
)
4111 lpfc_cleanup_vports_rrqs(vport
, ndlp
);
4117 * Start / ReStart rescue timer for Discovery / RSCN handling
4120 lpfc_set_disctmo(struct lpfc_vport
*vport
)
4122 struct Scsi_Host
*shost
= lpfc_shost_from_vport(vport
);
4123 struct lpfc_hba
*phba
= vport
->phba
;
4126 if (vport
->port_state
== LPFC_LOCAL_CFG_LINK
) {
4127 /* For FAN, timeout should be greater than edtov */
4128 tmo
= (((phba
->fc_edtov
+ 999) / 1000) + 1);
4130 /* Normal discovery timeout should be > than ELS/CT timeout
4131 * FC spec states we need 3 * ratov for CT requests
4133 tmo
= ((phba
->fc_ratov
* 3) + 3);
4137 if (!timer_pending(&vport
->fc_disctmo
)) {
4138 lpfc_debugfs_disc_trc(vport
, LPFC_DISC_TRC_ELS_CMD
,
4139 "set disc timer: tmo:x%x state:x%x flg:x%x",
4140 tmo
, vport
->port_state
, vport
->fc_flag
);
4143 mod_timer(&vport
->fc_disctmo
, jiffies
+ HZ
* tmo
);
4144 spin_lock_irq(shost
->host_lock
);
4145 vport
->fc_flag
|= FC_DISC_TMO
;
4146 spin_unlock_irq(shost
->host_lock
);
4148 /* Start Discovery Timer state <hba_state> */
4149 lpfc_printf_vlog(vport
, KERN_INFO
, LOG_DISCOVERY
,
4150 "0247 Start Discovery Timer state x%x "
4151 "Data: x%x x%lx x%x x%x\n",
4152 vport
->port_state
, tmo
,
4153 (unsigned long)&vport
->fc_disctmo
, vport
->fc_plogi_cnt
,
4154 vport
->fc_adisc_cnt
);
4160 * Cancel rescue timer for Discovery / RSCN handling
4163 lpfc_can_disctmo(struct lpfc_vport
*vport
)
4165 struct Scsi_Host
*shost
= lpfc_shost_from_vport(vport
);
4166 unsigned long iflags
;
4168 lpfc_debugfs_disc_trc(vport
, LPFC_DISC_TRC_ELS_CMD
,
4169 "can disc timer: state:x%x rtry:x%x flg:x%x",
4170 vport
->port_state
, vport
->fc_ns_retry
, vport
->fc_flag
);
4172 /* Turn off discovery timer if its running */
4173 if (vport
->fc_flag
& FC_DISC_TMO
) {
4174 spin_lock_irqsave(shost
->host_lock
, iflags
);
4175 vport
->fc_flag
&= ~FC_DISC_TMO
;
4176 spin_unlock_irqrestore(shost
->host_lock
, iflags
);
4177 del_timer_sync(&vport
->fc_disctmo
);
4178 spin_lock_irqsave(&vport
->work_port_lock
, iflags
);
4179 vport
->work_port_events
&= ~WORKER_DISC_TMO
;
4180 spin_unlock_irqrestore(&vport
->work_port_lock
, iflags
);
4183 /* Cancel Discovery Timer state <hba_state> */
4184 lpfc_printf_vlog(vport
, KERN_INFO
, LOG_DISCOVERY
,
4185 "0248 Cancel Discovery Timer state x%x "
4186 "Data: x%x x%x x%x\n",
4187 vport
->port_state
, vport
->fc_flag
,
4188 vport
->fc_plogi_cnt
, vport
->fc_adisc_cnt
);
4193 * Check specified ring for outstanding IOCB on the SLI queue
4194 * Return true if iocb matches the specified nport
4197 lpfc_check_sli_ndlp(struct lpfc_hba
*phba
,
4198 struct lpfc_sli_ring
*pring
,
4199 struct lpfc_iocbq
*iocb
,
4200 struct lpfc_nodelist
*ndlp
)
4202 struct lpfc_sli
*psli
= &phba
->sli
;
4203 IOCB_t
*icmd
= &iocb
->iocb
;
4204 struct lpfc_vport
*vport
= ndlp
->vport
;
4206 if (iocb
->vport
!= vport
)
4209 if (pring
->ringno
== LPFC_ELS_RING
) {
4210 switch (icmd
->ulpCommand
) {
4211 case CMD_GEN_REQUEST64_CR
:
4212 if (iocb
->context_un
.ndlp
== ndlp
)
4214 case CMD_ELS_REQUEST64_CR
:
4215 if (icmd
->un
.elsreq64
.remoteID
== ndlp
->nlp_DID
)
4217 case CMD_XMIT_ELS_RSP64_CX
:
4218 if (iocb
->context1
== (uint8_t *) ndlp
)
4221 } else if (pring
->ringno
== psli
->extra_ring
) {
4223 } else if (pring
->ringno
== psli
->fcp_ring
) {
4224 /* Skip match check if waiting to relogin to FCP target */
4225 if ((ndlp
->nlp_type
& NLP_FCP_TARGET
) &&
4226 (ndlp
->nlp_flag
& NLP_DELAY_TMO
)) {
4229 if (icmd
->ulpContext
== (volatile ushort
)ndlp
->nlp_rpi
) {
4232 } else if (pring
->ringno
== psli
->next_ring
) {
4239 * Free resources / clean up outstanding I/Os
4240 * associated with nlp_rpi in the LPFC_NODELIST entry.
4243 lpfc_no_rpi(struct lpfc_hba
*phba
, struct lpfc_nodelist
*ndlp
)
4245 LIST_HEAD(completions
);
4246 struct lpfc_sli
*psli
;
4247 struct lpfc_sli_ring
*pring
;
4248 struct lpfc_iocbq
*iocb
, *next_iocb
;
4251 lpfc_fabric_abort_nport(ndlp
);
4254 * Everything that matches on txcmplq will be returned
4255 * by firmware with a no rpi error.
4258 if (ndlp
->nlp_flag
& NLP_RPI_REGISTERED
) {
4259 /* Now process each ring */
4260 for (i
= 0; i
< psli
->num_rings
; i
++) {
4261 pring
= &psli
->ring
[i
];
4263 spin_lock_irq(&phba
->hbalock
);
4264 list_for_each_entry_safe(iocb
, next_iocb
, &pring
->txq
,
4267 * Check to see if iocb matches the nport we are
4270 if ((lpfc_check_sli_ndlp(phba
, pring
, iocb
,
4272 /* It matches, so deque and call compl
4274 list_move_tail(&iocb
->list
,
4279 spin_unlock_irq(&phba
->hbalock
);
4283 /* Cancel all the IOCBs from the completions list */
4284 lpfc_sli_cancel_iocbs(phba
, &completions
, IOSTAT_LOCAL_REJECT
,
4291 * Free rpi associated with LPFC_NODELIST entry.
4292 * This routine is called from lpfc_freenode(), when we are removing
4293 * a LPFC_NODELIST entry. It is also called if the driver initiates a
4294 * LOGO that completes successfully, and we are waiting to PLOGI back
4295 * to the remote NPort. In addition, it is called after we receive
4296 * and unsolicated ELS cmd, send back a rsp, the rsp completes and
4297 * we are waiting to PLOGI back to the remote NPort.
4300 lpfc_unreg_rpi(struct lpfc_vport
*vport
, struct lpfc_nodelist
*ndlp
)
4302 struct lpfc_hba
*phba
= vport
->phba
;
4307 if (ndlp
->nlp_flag
& NLP_RPI_REGISTERED
) {
4308 mbox
= mempool_alloc(phba
->mbox_mem_pool
, GFP_KERNEL
);
4310 /* SLI4 ports require the physical rpi value. */
4311 rpi
= ndlp
->nlp_rpi
;
4312 if (phba
->sli_rev
== LPFC_SLI_REV4
)
4313 rpi
= phba
->sli4_hba
.rpi_ids
[ndlp
->nlp_rpi
];
4314 lpfc_unreg_login(phba
, vport
->vpi
, rpi
, mbox
);
4315 mbox
->vport
= vport
;
4316 mbox
->mbox_cmpl
= lpfc_sli_def_mbox_cmpl
;
4317 rc
= lpfc_sli_issue_mbox(phba
, mbox
, MBX_NOWAIT
);
4318 if (rc
== MBX_NOT_FINISHED
)
4319 mempool_free(mbox
, phba
->mbox_mem_pool
);
4321 lpfc_no_rpi(phba
, ndlp
);
4323 if (phba
->sli_rev
!= LPFC_SLI_REV4
)
4325 ndlp
->nlp_flag
&= ~NLP_RPI_REGISTERED
;
4326 ndlp
->nlp_flag
&= ~NLP_NPR_ADISC
;
4333 * lpfc_unreg_hba_rpis - Unregister rpis registered to the hba.
4334 * @phba: pointer to lpfc hba data structure.
4336 * This routine is invoked to unregister all the currently registered RPIs
4340 lpfc_unreg_hba_rpis(struct lpfc_hba
*phba
)
4342 struct lpfc_vport
**vports
;
4343 struct lpfc_nodelist
*ndlp
;
4344 struct Scsi_Host
*shost
;
4347 vports
= lpfc_create_vport_work_array(phba
);
4349 lpfc_printf_log(phba
, KERN_ERR
, LOG_DISCOVERY
,
4350 "2884 Vport array allocation failed \n");
4353 for (i
= 0; i
<= phba
->max_vports
&& vports
[i
] != NULL
; i
++) {
4354 shost
= lpfc_shost_from_vport(vports
[i
]);
4355 spin_lock_irq(shost
->host_lock
);
4356 list_for_each_entry(ndlp
, &vports
[i
]->fc_nodes
, nlp_listp
) {
4357 if (ndlp
->nlp_flag
& NLP_RPI_REGISTERED
) {
4358 /* The mempool_alloc might sleep */
4359 spin_unlock_irq(shost
->host_lock
);
4360 lpfc_unreg_rpi(vports
[i
], ndlp
);
4361 spin_lock_irq(shost
->host_lock
);
4364 spin_unlock_irq(shost
->host_lock
);
4366 lpfc_destroy_vport_work_array(phba
, vports
);
4370 lpfc_unreg_all_rpis(struct lpfc_vport
*vport
)
4372 struct lpfc_hba
*phba
= vport
->phba
;
4376 if (phba
->sli_rev
== LPFC_SLI_REV4
) {
4377 lpfc_sli4_unreg_all_rpis(vport
);
4381 mbox
= mempool_alloc(phba
->mbox_mem_pool
, GFP_KERNEL
);
4383 lpfc_unreg_login(phba
, vport
->vpi
, LPFC_UNREG_ALL_RPIS_VPORT
,
4385 mbox
->vport
= vport
;
4386 mbox
->mbox_cmpl
= lpfc_sli_def_mbox_cmpl
;
4387 mbox
->context1
= NULL
;
4388 rc
= lpfc_sli_issue_mbox_wait(phba
, mbox
, LPFC_MBOX_TMO
);
4389 if (rc
!= MBX_TIMEOUT
)
4390 mempool_free(mbox
, phba
->mbox_mem_pool
);
4392 if ((rc
== MBX_TIMEOUT
) || (rc
== MBX_NOT_FINISHED
))
4393 lpfc_printf_vlog(vport
, KERN_ERR
, LOG_MBOX
| LOG_VPORT
,
4394 "1836 Could not issue "
4395 "unreg_login(all_rpis) status %d\n", rc
);
4400 lpfc_unreg_default_rpis(struct lpfc_vport
*vport
)
4402 struct lpfc_hba
*phba
= vport
->phba
;
4406 mbox
= mempool_alloc(phba
->mbox_mem_pool
, GFP_KERNEL
);
4408 lpfc_unreg_did(phba
, vport
->vpi
, LPFC_UNREG_ALL_DFLT_RPIS
,
4410 mbox
->vport
= vport
;
4411 mbox
->mbox_cmpl
= lpfc_sli_def_mbox_cmpl
;
4412 mbox
->context1
= NULL
;
4413 rc
= lpfc_sli_issue_mbox_wait(phba
, mbox
, LPFC_MBOX_TMO
);
4414 if (rc
!= MBX_TIMEOUT
)
4415 mempool_free(mbox
, phba
->mbox_mem_pool
);
4417 if ((rc
== MBX_TIMEOUT
) || (rc
== MBX_NOT_FINISHED
))
4418 lpfc_printf_vlog(vport
, KERN_ERR
, LOG_MBOX
| LOG_VPORT
,
4419 "1815 Could not issue "
4420 "unreg_did (default rpis) status %d\n",
4426 * Free resources associated with LPFC_NODELIST entry
4427 * so it can be freed.
4430 lpfc_cleanup_node(struct lpfc_vport
*vport
, struct lpfc_nodelist
*ndlp
)
4432 struct Scsi_Host
*shost
= lpfc_shost_from_vport(vport
);
4433 struct lpfc_hba
*phba
= vport
->phba
;
4434 LPFC_MBOXQ_t
*mb
, *nextmb
;
4435 struct lpfc_dmabuf
*mp
;
4437 /* Cleanup node for NPort <nlp_DID> */
4438 lpfc_printf_vlog(vport
, KERN_INFO
, LOG_NODE
,
4439 "0900 Cleanup node for NPort x%x "
4440 "Data: x%x x%x x%x\n",
4441 ndlp
->nlp_DID
, ndlp
->nlp_flag
,
4442 ndlp
->nlp_state
, ndlp
->nlp_rpi
);
4443 if (NLP_CHK_FREE_REQ(ndlp
)) {
4444 lpfc_printf_vlog(vport
, KERN_WARNING
, LOG_NODE
,
4445 "0280 lpfc_cleanup_node: ndlp:x%p "
4446 "usgmap:x%x refcnt:%d\n",
4447 (void *)ndlp
, ndlp
->nlp_usg_map
,
4448 atomic_read(&ndlp
->kref
.refcount
));
4449 lpfc_dequeue_node(vport
, ndlp
);
4451 lpfc_printf_vlog(vport
, KERN_WARNING
, LOG_NODE
,
4452 "0281 lpfc_cleanup_node: ndlp:x%p "
4453 "usgmap:x%x refcnt:%d\n",
4454 (void *)ndlp
, ndlp
->nlp_usg_map
,
4455 atomic_read(&ndlp
->kref
.refcount
));
4456 lpfc_disable_node(vport
, ndlp
);
4459 /* cleanup any ndlp on mbox q waiting for reglogin cmpl */
4460 if ((mb
= phba
->sli
.mbox_active
)) {
4461 if ((mb
->u
.mb
.mbxCommand
== MBX_REG_LOGIN64
) &&
4462 (ndlp
== (struct lpfc_nodelist
*) mb
->context2
)) {
4463 mb
->context2
= NULL
;
4464 mb
->mbox_cmpl
= lpfc_sli_def_mbox_cmpl
;
4468 spin_lock_irq(&phba
->hbalock
);
4469 /* Cleanup REG_LOGIN completions which are not yet processed */
4470 list_for_each_entry(mb
, &phba
->sli
.mboxq_cmpl
, list
) {
4471 if ((mb
->u
.mb
.mbxCommand
!= MBX_REG_LOGIN64
) ||
4472 (ndlp
!= (struct lpfc_nodelist
*) mb
->context2
))
4475 mb
->context2
= NULL
;
4476 mb
->mbox_cmpl
= lpfc_sli_def_mbox_cmpl
;
4479 list_for_each_entry_safe(mb
, nextmb
, &phba
->sli
.mboxq
, list
) {
4480 if ((mb
->u
.mb
.mbxCommand
== MBX_REG_LOGIN64
) &&
4481 (ndlp
== (struct lpfc_nodelist
*) mb
->context2
)) {
4482 mp
= (struct lpfc_dmabuf
*) (mb
->context1
);
4484 __lpfc_mbuf_free(phba
, mp
->virt
, mp
->phys
);
4487 list_del(&mb
->list
);
4488 mempool_free(mb
, phba
->mbox_mem_pool
);
4489 /* We shall not invoke the lpfc_nlp_put to decrement
4490 * the ndlp reference count as we are in the process
4491 * of lpfc_nlp_release.
4495 spin_unlock_irq(&phba
->hbalock
);
4497 lpfc_els_abort(phba
, ndlp
);
4499 spin_lock_irq(shost
->host_lock
);
4500 ndlp
->nlp_flag
&= ~NLP_DELAY_TMO
;
4501 spin_unlock_irq(shost
->host_lock
);
4503 ndlp
->nlp_last_elscmd
= 0;
4504 del_timer_sync(&ndlp
->nlp_delayfunc
);
4506 list_del_init(&ndlp
->els_retry_evt
.evt_listp
);
4507 list_del_init(&ndlp
->dev_loss_evt
.evt_listp
);
4508 lpfc_cleanup_vports_rrqs(vport
, ndlp
);
4509 lpfc_unreg_rpi(vport
, ndlp
);
4515 * Check to see if we can free the nlp back to the freelist.
4516 * If we are in the middle of using the nlp in the discovery state
4517 * machine, defer the free till we reach the end of the state machine.
4520 lpfc_nlp_remove(struct lpfc_vport
*vport
, struct lpfc_nodelist
*ndlp
)
4522 struct lpfc_hba
*phba
= vport
->phba
;
4523 struct lpfc_rport_data
*rdata
;
4527 lpfc_cancel_retry_delay_tmo(vport
, ndlp
);
4528 if ((ndlp
->nlp_flag
& NLP_DEFER_RM
) &&
4529 !(ndlp
->nlp_flag
& NLP_REG_LOGIN_SEND
) &&
4530 !(ndlp
->nlp_flag
& NLP_RPI_REGISTERED
)) {
4531 /* For this case we need to cleanup the default rpi
4532 * allocated by the firmware.
4534 if ((mbox
= mempool_alloc(phba
->mbox_mem_pool
, GFP_KERNEL
))
4536 rc
= lpfc_reg_rpi(phba
, vport
->vpi
, ndlp
->nlp_DID
,
4537 (uint8_t *) &vport
->fc_sparam
, mbox
, ndlp
->nlp_rpi
);
4539 mempool_free(mbox
, phba
->mbox_mem_pool
);
4542 mbox
->mbox_flag
|= LPFC_MBX_IMED_UNREG
;
4543 mbox
->mbox_cmpl
= lpfc_mbx_cmpl_dflt_rpi
;
4544 mbox
->vport
= vport
;
4545 mbox
->context2
= NULL
;
4546 rc
=lpfc_sli_issue_mbox(phba
, mbox
, MBX_NOWAIT
);
4547 if (rc
== MBX_NOT_FINISHED
) {
4548 mempool_free(mbox
, phba
->mbox_mem_pool
);
4553 lpfc_cleanup_node(vport
, ndlp
);
4556 * We can get here with a non-NULL ndlp->rport because when we
4557 * unregister a rport we don't break the rport/node linkage. So if we
4558 * do, make sure we don't leaving any dangling pointers behind.
4561 rdata
= ndlp
->rport
->dd_data
;
4562 rdata
->pnode
= NULL
;
4568 lpfc_matchdid(struct lpfc_vport
*vport
, struct lpfc_nodelist
*ndlp
,
4571 D_ID mydid
, ndlpdid
, matchdid
;
4573 if (did
== Bcast_DID
)
4576 /* First check for Direct match */
4577 if (ndlp
->nlp_DID
== did
)
4580 /* Next check for area/domain identically equals 0 match */
4581 mydid
.un
.word
= vport
->fc_myDID
;
4582 if ((mydid
.un
.b
.domain
== 0) && (mydid
.un
.b
.area
== 0)) {
4586 matchdid
.un
.word
= did
;
4587 ndlpdid
.un
.word
= ndlp
->nlp_DID
;
4588 if (matchdid
.un
.b
.id
== ndlpdid
.un
.b
.id
) {
4589 if ((mydid
.un
.b
.domain
== matchdid
.un
.b
.domain
) &&
4590 (mydid
.un
.b
.area
== matchdid
.un
.b
.area
)) {
4591 if ((ndlpdid
.un
.b
.domain
== 0) &&
4592 (ndlpdid
.un
.b
.area
== 0)) {
4593 if (ndlpdid
.un
.b
.id
)
4599 matchdid
.un
.word
= ndlp
->nlp_DID
;
4600 if ((mydid
.un
.b
.domain
== ndlpdid
.un
.b
.domain
) &&
4601 (mydid
.un
.b
.area
== ndlpdid
.un
.b
.area
)) {
4602 if ((matchdid
.un
.b
.domain
== 0) &&
4603 (matchdid
.un
.b
.area
== 0)) {
4604 if (matchdid
.un
.b
.id
)
4612 /* Search for a nodelist entry */
4613 static struct lpfc_nodelist
*
4614 __lpfc_findnode_did(struct lpfc_vport
*vport
, uint32_t did
)
4616 struct lpfc_nodelist
*ndlp
;
4619 list_for_each_entry(ndlp
, &vport
->fc_nodes
, nlp_listp
) {
4620 if (lpfc_matchdid(vport
, ndlp
, did
)) {
4621 data1
= (((uint32_t) ndlp
->nlp_state
<< 24) |
4622 ((uint32_t) ndlp
->nlp_xri
<< 16) |
4623 ((uint32_t) ndlp
->nlp_type
<< 8) |
4624 ((uint32_t) ndlp
->nlp_rpi
& 0xff));
4625 lpfc_printf_vlog(vport
, KERN_INFO
, LOG_NODE
,
4626 "0929 FIND node DID "
4627 "Data: x%p x%x x%x x%x\n",
4628 ndlp
, ndlp
->nlp_DID
,
4629 ndlp
->nlp_flag
, data1
);
4634 /* FIND node did <did> NOT FOUND */
4635 lpfc_printf_vlog(vport
, KERN_INFO
, LOG_NODE
,
4636 "0932 FIND node did x%x NOT FOUND.\n", did
);
4640 struct lpfc_nodelist
*
4641 lpfc_findnode_did(struct lpfc_vport
*vport
, uint32_t did
)
4643 struct Scsi_Host
*shost
= lpfc_shost_from_vport(vport
);
4644 struct lpfc_nodelist
*ndlp
;
4645 unsigned long iflags
;
4647 spin_lock_irqsave(shost
->host_lock
, iflags
);
4648 ndlp
= __lpfc_findnode_did(vport
, did
);
4649 spin_unlock_irqrestore(shost
->host_lock
, iflags
);
4653 struct lpfc_nodelist
*
4654 lpfc_setup_disc_node(struct lpfc_vport
*vport
, uint32_t did
)
4656 struct Scsi_Host
*shost
= lpfc_shost_from_vport(vport
);
4657 struct lpfc_nodelist
*ndlp
;
4659 ndlp
= lpfc_findnode_did(vport
, did
);
4661 if ((vport
->fc_flag
& FC_RSCN_MODE
) != 0 &&
4662 lpfc_rscn_payload_check(vport
, did
) == 0)
4664 ndlp
= (struct lpfc_nodelist
*)
4665 mempool_alloc(vport
->phba
->nlp_mem_pool
, GFP_KERNEL
);
4668 lpfc_nlp_init(vport
, ndlp
, did
);
4669 lpfc_nlp_set_state(vport
, ndlp
, NLP_STE_NPR_NODE
);
4670 spin_lock_irq(shost
->host_lock
);
4671 ndlp
->nlp_flag
|= NLP_NPR_2B_DISC
;
4672 spin_unlock_irq(shost
->host_lock
);
4674 } else if (!NLP_CHK_NODE_ACT(ndlp
)) {
4675 ndlp
= lpfc_enable_node(vport
, ndlp
, NLP_STE_NPR_NODE
);
4678 spin_lock_irq(shost
->host_lock
);
4679 ndlp
->nlp_flag
|= NLP_NPR_2B_DISC
;
4680 spin_unlock_irq(shost
->host_lock
);
4684 if ((vport
->fc_flag
& FC_RSCN_MODE
) &&
4685 !(vport
->fc_flag
& FC_NDISC_ACTIVE
)) {
4686 if (lpfc_rscn_payload_check(vport
, did
)) {
4687 /* If we've already received a PLOGI from this NPort
4688 * we don't need to try to discover it again.
4690 if (ndlp
->nlp_flag
& NLP_RCV_PLOGI
)
4693 /* Since this node is marked for discovery,
4694 * delay timeout is not needed.
4696 lpfc_cancel_retry_delay_tmo(vport
, ndlp
);
4697 spin_lock_irq(shost
->host_lock
);
4698 ndlp
->nlp_flag
|= NLP_NPR_2B_DISC
;
4699 spin_unlock_irq(shost
->host_lock
);
4703 /* If we've already received a PLOGI from this NPort,
4704 * or we are already in the process of discovery on it,
4705 * we don't need to try to discover it again.
4707 if (ndlp
->nlp_state
== NLP_STE_ADISC_ISSUE
||
4708 ndlp
->nlp_state
== NLP_STE_PLOGI_ISSUE
||
4709 ndlp
->nlp_flag
& NLP_RCV_PLOGI
)
4711 lpfc_nlp_set_state(vport
, ndlp
, NLP_STE_NPR_NODE
);
4712 spin_lock_irq(shost
->host_lock
);
4713 ndlp
->nlp_flag
|= NLP_NPR_2B_DISC
;
4714 spin_unlock_irq(shost
->host_lock
);
4719 /* Build a list of nodes to discover based on the loopmap */
4721 lpfc_disc_list_loopmap(struct lpfc_vport
*vport
)
4723 struct lpfc_hba
*phba
= vport
->phba
;
4725 uint32_t alpa
, index
;
4727 if (!lpfc_is_link_up(phba
))
4730 if (phba
->fc_topology
!= LPFC_TOPOLOGY_LOOP
)
4733 /* Check for loop map present or not */
4734 if (phba
->alpa_map
[0]) {
4735 for (j
= 1; j
<= phba
->alpa_map
[0]; j
++) {
4736 alpa
= phba
->alpa_map
[j
];
4737 if (((vport
->fc_myDID
& 0xff) == alpa
) || (alpa
== 0))
4739 lpfc_setup_disc_node(vport
, alpa
);
4742 /* No alpamap, so try all alpa's */
4743 for (j
= 0; j
< FC_MAXLOOP
; j
++) {
4744 /* If cfg_scan_down is set, start from highest
4745 * ALPA (0xef) to lowest (0x1).
4747 if (vport
->cfg_scan_down
)
4750 index
= FC_MAXLOOP
- j
- 1;
4751 alpa
= lpfcAlpaArray
[index
];
4752 if ((vport
->fc_myDID
& 0xff) == alpa
)
4754 lpfc_setup_disc_node(vport
, alpa
);
4761 lpfc_issue_clear_la(struct lpfc_hba
*phba
, struct lpfc_vport
*vport
)
4764 struct lpfc_sli
*psli
= &phba
->sli
;
4765 struct lpfc_sli_ring
*extra_ring
= &psli
->ring
[psli
->extra_ring
];
4766 struct lpfc_sli_ring
*fcp_ring
= &psli
->ring
[psli
->fcp_ring
];
4767 struct lpfc_sli_ring
*next_ring
= &psli
->ring
[psli
->next_ring
];
4771 * if it's not a physical port or if we already send
4772 * clear_la then don't send it.
4774 if ((phba
->link_state
>= LPFC_CLEAR_LA
) ||
4775 (vport
->port_type
!= LPFC_PHYSICAL_PORT
) ||
4776 (phba
->sli_rev
== LPFC_SLI_REV4
))
4779 /* Link up discovery */
4780 if ((mbox
= mempool_alloc(phba
->mbox_mem_pool
, GFP_KERNEL
)) != NULL
) {
4781 phba
->link_state
= LPFC_CLEAR_LA
;
4782 lpfc_clear_la(phba
, mbox
);
4783 mbox
->mbox_cmpl
= lpfc_mbx_cmpl_clear_la
;
4784 mbox
->vport
= vport
;
4785 rc
= lpfc_sli_issue_mbox(phba
, mbox
, MBX_NOWAIT
);
4786 if (rc
== MBX_NOT_FINISHED
) {
4787 mempool_free(mbox
, phba
->mbox_mem_pool
);
4788 lpfc_disc_flush_list(vport
);
4789 extra_ring
->flag
&= ~LPFC_STOP_IOCB_EVENT
;
4790 fcp_ring
->flag
&= ~LPFC_STOP_IOCB_EVENT
;
4791 next_ring
->flag
&= ~LPFC_STOP_IOCB_EVENT
;
4792 phba
->link_state
= LPFC_HBA_ERROR
;
4797 /* Reg_vpi to tell firmware to resume normal operations */
4799 lpfc_issue_reg_vpi(struct lpfc_hba
*phba
, struct lpfc_vport
*vport
)
4801 LPFC_MBOXQ_t
*regvpimbox
;
4803 regvpimbox
= mempool_alloc(phba
->mbox_mem_pool
, GFP_KERNEL
);
4805 lpfc_reg_vpi(vport
, regvpimbox
);
4806 regvpimbox
->mbox_cmpl
= lpfc_mbx_cmpl_reg_vpi
;
4807 regvpimbox
->vport
= vport
;
4808 if (lpfc_sli_issue_mbox(phba
, regvpimbox
, MBX_NOWAIT
)
4809 == MBX_NOT_FINISHED
) {
4810 mempool_free(regvpimbox
, phba
->mbox_mem_pool
);
4815 /* Start Link up / RSCN discovery on NPR nodes */
4817 lpfc_disc_start(struct lpfc_vport
*vport
)
4819 struct Scsi_Host
*shost
= lpfc_shost_from_vport(vport
);
4820 struct lpfc_hba
*phba
= vport
->phba
;
4822 uint32_t clear_la_pending
;
4825 if (!lpfc_is_link_up(phba
))
4828 if (phba
->link_state
== LPFC_CLEAR_LA
)
4829 clear_la_pending
= 1;
4831 clear_la_pending
= 0;
4833 if (vport
->port_state
< LPFC_VPORT_READY
)
4834 vport
->port_state
= LPFC_DISC_AUTH
;
4836 lpfc_set_disctmo(vport
);
4838 if (vport
->fc_prevDID
== vport
->fc_myDID
)
4843 vport
->fc_prevDID
= vport
->fc_myDID
;
4844 vport
->num_disc_nodes
= 0;
4846 /* Start Discovery state <hba_state> */
4847 lpfc_printf_vlog(vport
, KERN_INFO
, LOG_DISCOVERY
,
4848 "0202 Start Discovery hba state x%x "
4849 "Data: x%x x%x x%x\n",
4850 vport
->port_state
, vport
->fc_flag
, vport
->fc_plogi_cnt
,
4851 vport
->fc_adisc_cnt
);
4853 /* First do ADISCs - if any */
4854 num_sent
= lpfc_els_disc_adisc(vport
);
4859 /* Register the VPI for SLI3, NON-NPIV only. */
4860 if ((phba
->sli3_options
& LPFC_SLI3_NPIV_ENABLED
) &&
4861 !(vport
->fc_flag
& FC_PT2PT
) &&
4862 !(vport
->fc_flag
& FC_RSCN_MODE
) &&
4863 (phba
->sli_rev
< LPFC_SLI_REV4
)) {
4864 lpfc_issue_reg_vpi(phba
, vport
);
4869 * For SLI2, we need to set port_state to READY and continue
4872 if (vport
->port_state
< LPFC_VPORT_READY
&& !clear_la_pending
) {
4873 /* If we get here, there is nothing to ADISC */
4874 if (vport
->port_type
== LPFC_PHYSICAL_PORT
)
4875 lpfc_issue_clear_la(phba
, vport
);
4877 if (!(vport
->fc_flag
& FC_ABORT_DISCOVERY
)) {
4878 vport
->num_disc_nodes
= 0;
4879 /* go thru NPR nodes and issue ELS PLOGIs */
4880 if (vport
->fc_npr_cnt
)
4881 lpfc_els_disc_plogi(vport
);
4883 if (!vport
->num_disc_nodes
) {
4884 spin_lock_irq(shost
->host_lock
);
4885 vport
->fc_flag
&= ~FC_NDISC_ACTIVE
;
4886 spin_unlock_irq(shost
->host_lock
);
4887 lpfc_can_disctmo(vport
);
4890 vport
->port_state
= LPFC_VPORT_READY
;
4892 /* Next do PLOGIs - if any */
4893 num_sent
= lpfc_els_disc_plogi(vport
);
4898 if (vport
->fc_flag
& FC_RSCN_MODE
) {
4899 /* Check to see if more RSCNs came in while we
4900 * were processing this one.
4902 if ((vport
->fc_rscn_id_cnt
== 0) &&
4903 (!(vport
->fc_flag
& FC_RSCN_DISCOVERY
))) {
4904 spin_lock_irq(shost
->host_lock
);
4905 vport
->fc_flag
&= ~FC_RSCN_MODE
;
4906 spin_unlock_irq(shost
->host_lock
);
4907 lpfc_can_disctmo(vport
);
4909 lpfc_els_handle_rscn(vport
);
4916 * Ignore completion for all IOCBs on tx and txcmpl queue for ELS
4917 * ring the match the sppecified nodelist.
4920 lpfc_free_tx(struct lpfc_hba
*phba
, struct lpfc_nodelist
*ndlp
)
4922 LIST_HEAD(completions
);
4923 struct lpfc_sli
*psli
;
4925 struct lpfc_iocbq
*iocb
, *next_iocb
;
4926 struct lpfc_sli_ring
*pring
;
4929 pring
= &psli
->ring
[LPFC_ELS_RING
];
4931 /* Error matching iocb on txq or txcmplq
4932 * First check the txq.
4934 spin_lock_irq(&phba
->hbalock
);
4935 list_for_each_entry_safe(iocb
, next_iocb
, &pring
->txq
, list
) {
4936 if (iocb
->context1
!= ndlp
) {
4940 if ((icmd
->ulpCommand
== CMD_ELS_REQUEST64_CR
) ||
4941 (icmd
->ulpCommand
== CMD_XMIT_ELS_RSP64_CX
)) {
4943 list_move_tail(&iocb
->list
, &completions
);
4948 /* Next check the txcmplq */
4949 list_for_each_entry_safe(iocb
, next_iocb
, &pring
->txcmplq
, list
) {
4950 if (iocb
->context1
!= ndlp
) {
4954 if (icmd
->ulpCommand
== CMD_ELS_REQUEST64_CR
||
4955 icmd
->ulpCommand
== CMD_XMIT_ELS_RSP64_CX
) {
4956 lpfc_sli_issue_abort_iotag(phba
, pring
, iocb
);
4959 spin_unlock_irq(&phba
->hbalock
);
4961 /* Cancel all the IOCBs from the completions list */
4962 lpfc_sli_cancel_iocbs(phba
, &completions
, IOSTAT_LOCAL_REJECT
,
4967 lpfc_disc_flush_list(struct lpfc_vport
*vport
)
4969 struct lpfc_nodelist
*ndlp
, *next_ndlp
;
4970 struct lpfc_hba
*phba
= vport
->phba
;
4972 if (vport
->fc_plogi_cnt
|| vport
->fc_adisc_cnt
) {
4973 list_for_each_entry_safe(ndlp
, next_ndlp
, &vport
->fc_nodes
,
4975 if (!NLP_CHK_NODE_ACT(ndlp
))
4977 if (ndlp
->nlp_state
== NLP_STE_PLOGI_ISSUE
||
4978 ndlp
->nlp_state
== NLP_STE_ADISC_ISSUE
) {
4979 lpfc_free_tx(phba
, ndlp
);
4986 lpfc_cleanup_discovery_resources(struct lpfc_vport
*vport
)
4988 lpfc_els_flush_rscn(vport
);
4989 lpfc_els_flush_cmd(vport
);
4990 lpfc_disc_flush_list(vport
);
4993 /*****************************************************************************/
4995 * NAME: lpfc_disc_timeout
4997 * FUNCTION: Fibre Channel driver discovery timeout routine.
4999 * EXECUTION ENVIRONMENT: interrupt only
5007 /*****************************************************************************/
5009 lpfc_disc_timeout(unsigned long ptr
)
5011 struct lpfc_vport
*vport
= (struct lpfc_vport
*) ptr
;
5012 struct lpfc_hba
*phba
= vport
->phba
;
5013 uint32_t tmo_posted
;
5014 unsigned long flags
= 0;
5016 if (unlikely(!phba
))
5019 spin_lock_irqsave(&vport
->work_port_lock
, flags
);
5020 tmo_posted
= vport
->work_port_events
& WORKER_DISC_TMO
;
5022 vport
->work_port_events
|= WORKER_DISC_TMO
;
5023 spin_unlock_irqrestore(&vport
->work_port_lock
, flags
);
5026 lpfc_worker_wake_up(phba
);
5031 lpfc_disc_timeout_handler(struct lpfc_vport
*vport
)
5033 struct Scsi_Host
*shost
= lpfc_shost_from_vport(vport
);
5034 struct lpfc_hba
*phba
= vport
->phba
;
5035 struct lpfc_sli
*psli
= &phba
->sli
;
5036 struct lpfc_nodelist
*ndlp
, *next_ndlp
;
5037 LPFC_MBOXQ_t
*initlinkmbox
;
5038 int rc
, clrlaerr
= 0;
5040 if (!(vport
->fc_flag
& FC_DISC_TMO
))
5043 spin_lock_irq(shost
->host_lock
);
5044 vport
->fc_flag
&= ~FC_DISC_TMO
;
5045 spin_unlock_irq(shost
->host_lock
);
5047 lpfc_debugfs_disc_trc(vport
, LPFC_DISC_TRC_ELS_CMD
,
5048 "disc timeout: state:x%x rtry:x%x flg:x%x",
5049 vport
->port_state
, vport
->fc_ns_retry
, vport
->fc_flag
);
5051 switch (vport
->port_state
) {
5053 case LPFC_LOCAL_CFG_LINK
:
5054 /* port_state is identically LPFC_LOCAL_CFG_LINK while waiting for
5058 lpfc_printf_vlog(vport
, KERN_WARNING
, LOG_DISCOVERY
,
5059 "0221 FAN timeout\n");
5060 /* Start discovery by sending FLOGI, clean up old rpis */
5061 list_for_each_entry_safe(ndlp
, next_ndlp
, &vport
->fc_nodes
,
5063 if (!NLP_CHK_NODE_ACT(ndlp
))
5065 if (ndlp
->nlp_state
!= NLP_STE_NPR_NODE
)
5067 if (ndlp
->nlp_type
& NLP_FABRIC
) {
5068 /* Clean up the ndlp on Fabric connections */
5069 lpfc_drop_node(vport
, ndlp
);
5071 } else if (!(ndlp
->nlp_flag
& NLP_NPR_ADISC
)) {
5072 /* Fail outstanding IO now since device
5073 * is marked for PLOGI.
5075 lpfc_unreg_rpi(vport
, ndlp
);
5078 if (vport
->port_state
!= LPFC_FLOGI
) {
5079 if (phba
->sli_rev
<= LPFC_SLI_REV3
)
5080 lpfc_initial_flogi(vport
);
5082 lpfc_issue_init_vfi(vport
);
5089 /* port_state is identically LPFC_FLOGI while waiting for FLOGI cmpl */
5090 /* Initial FLOGI timeout */
5091 lpfc_printf_vlog(vport
, KERN_ERR
, LOG_DISCOVERY
,
5092 "0222 Initial %s timeout\n",
5093 vport
->vpi
? "FDISC" : "FLOGI");
5095 /* Assume no Fabric and go on with discovery.
5096 * Check for outstanding ELS FLOGI to abort.
5099 /* FLOGI failed, so just use loop map to make discovery list */
5100 lpfc_disc_list_loopmap(vport
);
5102 /* Start discovery */
5103 lpfc_disc_start(vport
);
5106 case LPFC_FABRIC_CFG_LINK
:
5107 /* hba_state is identically LPFC_FABRIC_CFG_LINK while waiting for
5109 lpfc_printf_vlog(vport
, KERN_ERR
, LOG_DISCOVERY
,
5110 "0223 Timeout while waiting for "
5111 "NameServer login\n");
5112 /* Next look for NameServer ndlp */
5113 ndlp
= lpfc_findnode_did(vport
, NameServer_DID
);
5114 if (ndlp
&& NLP_CHK_NODE_ACT(ndlp
))
5115 lpfc_els_abort(phba
, ndlp
);
5117 /* ReStart discovery */
5121 /* Check for wait for NameServer Rsp timeout */
5122 lpfc_printf_vlog(vport
, KERN_ERR
, LOG_DISCOVERY
,
5123 "0224 NameServer Query timeout "
5125 vport
->fc_ns_retry
, LPFC_MAX_NS_RETRY
);
5127 if (vport
->fc_ns_retry
< LPFC_MAX_NS_RETRY
) {
5128 /* Try it one more time */
5129 vport
->fc_ns_retry
++;
5130 rc
= lpfc_ns_cmd(vport
, SLI_CTNS_GID_FT
,
5131 vport
->fc_ns_retry
, 0);
5135 vport
->fc_ns_retry
= 0;
5139 * Discovery is over.
5140 * set port_state to PORT_READY if SLI2.
5141 * cmpl_reg_vpi will set port_state to READY for SLI3.
5143 if (phba
->sli_rev
< LPFC_SLI_REV4
) {
5144 if (phba
->sli3_options
& LPFC_SLI3_NPIV_ENABLED
)
5145 lpfc_issue_reg_vpi(phba
, vport
);
5147 lpfc_issue_clear_la(phba
, vport
);
5148 vport
->port_state
= LPFC_VPORT_READY
;
5152 /* Setup and issue mailbox INITIALIZE LINK command */
5153 initlinkmbox
= mempool_alloc(phba
->mbox_mem_pool
, GFP_KERNEL
);
5154 if (!initlinkmbox
) {
5155 lpfc_printf_vlog(vport
, KERN_ERR
, LOG_DISCOVERY
,
5156 "0206 Device Discovery "
5157 "completion error\n");
5158 phba
->link_state
= LPFC_HBA_ERROR
;
5162 lpfc_linkdown(phba
);
5163 lpfc_init_link(phba
, initlinkmbox
, phba
->cfg_topology
,
5164 phba
->cfg_link_speed
);
5165 initlinkmbox
->u
.mb
.un
.varInitLnk
.lipsr_AL_PA
= 0;
5166 initlinkmbox
->vport
= vport
;
5167 initlinkmbox
->mbox_cmpl
= lpfc_sli_def_mbox_cmpl
;
5168 rc
= lpfc_sli_issue_mbox(phba
, initlinkmbox
, MBX_NOWAIT
);
5169 lpfc_set_loopback_flag(phba
);
5170 if (rc
== MBX_NOT_FINISHED
)
5171 mempool_free(initlinkmbox
, phba
->mbox_mem_pool
);
5175 case LPFC_DISC_AUTH
:
5176 /* Node Authentication timeout */
5177 lpfc_printf_vlog(vport
, KERN_ERR
, LOG_DISCOVERY
,
5178 "0227 Node Authentication timeout\n");
5179 lpfc_disc_flush_list(vport
);
5182 * set port_state to PORT_READY if SLI2.
5183 * cmpl_reg_vpi will set port_state to READY for SLI3.
5185 if (phba
->sli_rev
< LPFC_SLI_REV4
) {
5186 if (phba
->sli3_options
& LPFC_SLI3_NPIV_ENABLED
)
5187 lpfc_issue_reg_vpi(phba
, vport
);
5188 else { /* NPIV Not enabled */
5189 lpfc_issue_clear_la(phba
, vport
);
5190 vport
->port_state
= LPFC_VPORT_READY
;
5195 case LPFC_VPORT_READY
:
5196 if (vport
->fc_flag
& FC_RSCN_MODE
) {
5197 lpfc_printf_vlog(vport
, KERN_ERR
, LOG_DISCOVERY
,
5198 "0231 RSCN timeout Data: x%x "
5200 vport
->fc_ns_retry
, LPFC_MAX_NS_RETRY
);
5202 /* Cleanup any outstanding ELS commands */
5203 lpfc_els_flush_cmd(vport
);
5205 lpfc_els_flush_rscn(vport
);
5206 lpfc_disc_flush_list(vport
);
5211 lpfc_printf_vlog(vport
, KERN_ERR
, LOG_DISCOVERY
,
5212 "0273 Unexpected discovery timeout, "
5213 "vport State x%x\n", vport
->port_state
);
5217 switch (phba
->link_state
) {
5219 /* CLEAR LA timeout */
5220 lpfc_printf_vlog(vport
, KERN_ERR
, LOG_DISCOVERY
,
5221 "0228 CLEAR LA timeout\n");
5226 lpfc_issue_clear_la(phba
, vport
);
5228 case LPFC_LINK_UNKNOWN
:
5229 case LPFC_WARM_START
:
5230 case LPFC_INIT_START
:
5231 case LPFC_INIT_MBX_CMDS
:
5232 case LPFC_LINK_DOWN
:
5233 case LPFC_HBA_ERROR
:
5234 lpfc_printf_vlog(vport
, KERN_ERR
, LOG_DISCOVERY
,
5235 "0230 Unexpected timeout, hba link "
5236 "state x%x\n", phba
->link_state
);
5240 case LPFC_HBA_READY
:
5245 lpfc_disc_flush_list(vport
);
5246 psli
->ring
[(psli
->extra_ring
)].flag
&= ~LPFC_STOP_IOCB_EVENT
;
5247 psli
->ring
[(psli
->fcp_ring
)].flag
&= ~LPFC_STOP_IOCB_EVENT
;
5248 psli
->ring
[(psli
->next_ring
)].flag
&= ~LPFC_STOP_IOCB_EVENT
;
5249 vport
->port_state
= LPFC_VPORT_READY
;
5256 * This routine handles processing a NameServer REG_LOGIN mailbox
5257 * command upon completion. It is setup in the LPFC_MBOXQ
5258 * as the completion routine when the command is
5259 * handed off to the SLI layer.
5262 lpfc_mbx_cmpl_fdmi_reg_login(struct lpfc_hba
*phba
, LPFC_MBOXQ_t
*pmb
)
5264 MAILBOX_t
*mb
= &pmb
->u
.mb
;
5265 struct lpfc_dmabuf
*mp
= (struct lpfc_dmabuf
*) (pmb
->context1
);
5266 struct lpfc_nodelist
*ndlp
= (struct lpfc_nodelist
*) pmb
->context2
;
5267 struct lpfc_vport
*vport
= pmb
->vport
;
5269 pmb
->context1
= NULL
;
5270 pmb
->context2
= NULL
;
5272 if (phba
->sli_rev
< LPFC_SLI_REV4
)
5273 ndlp
->nlp_rpi
= mb
->un
.varWords
[0];
5274 ndlp
->nlp_flag
|= NLP_RPI_REGISTERED
;
5275 ndlp
->nlp_type
|= NLP_FABRIC
;
5276 lpfc_nlp_set_state(vport
, ndlp
, NLP_STE_UNMAPPED_NODE
);
5279 * Start issuing Fabric-Device Management Interface (FDMI) command to
5280 * 0xfffffa (FDMI well known port) or Delay issuing FDMI command if
5281 * fdmi-on=2 (supporting RPA/hostnmae)
5284 if (vport
->cfg_fdmi_on
== 1)
5285 lpfc_fdmi_cmd(vport
, ndlp
, SLI_MGMT_DHBA
);
5287 mod_timer(&vport
->fc_fdmitmo
, jiffies
+ HZ
* 60);
5289 /* decrement the node reference count held for this callback
5293 lpfc_mbuf_free(phba
, mp
->virt
, mp
->phys
);
5295 mempool_free(pmb
, phba
->mbox_mem_pool
);
5301 lpfc_filter_by_rpi(struct lpfc_nodelist
*ndlp
, void *param
)
5303 uint16_t *rpi
= param
;
5305 return ndlp
->nlp_rpi
== *rpi
;
5309 lpfc_filter_by_wwpn(struct lpfc_nodelist
*ndlp
, void *param
)
5311 return memcmp(&ndlp
->nlp_portname
, param
,
5312 sizeof(ndlp
->nlp_portname
)) == 0;
5315 static struct lpfc_nodelist
*
5316 __lpfc_find_node(struct lpfc_vport
*vport
, node_filter filter
, void *param
)
5318 struct lpfc_nodelist
*ndlp
;
5320 list_for_each_entry(ndlp
, &vport
->fc_nodes
, nlp_listp
) {
5321 if (filter(ndlp
, param
))
5328 * This routine looks up the ndlp lists for the given RPI. If rpi found it
5329 * returns the node list element pointer else return NULL.
5331 struct lpfc_nodelist
*
5332 __lpfc_findnode_rpi(struct lpfc_vport
*vport
, uint16_t rpi
)
5334 return __lpfc_find_node(vport
, lpfc_filter_by_rpi
, &rpi
);
5338 * This routine looks up the ndlp lists for the given WWPN. If WWPN found it
5339 * returns the node element list pointer else return NULL.
5341 struct lpfc_nodelist
*
5342 lpfc_findnode_wwpn(struct lpfc_vport
*vport
, struct lpfc_name
*wwpn
)
5344 struct Scsi_Host
*shost
= lpfc_shost_from_vport(vport
);
5345 struct lpfc_nodelist
*ndlp
;
5347 spin_lock_irq(shost
->host_lock
);
5348 ndlp
= __lpfc_find_node(vport
, lpfc_filter_by_wwpn
, wwpn
);
5349 spin_unlock_irq(shost
->host_lock
);
5354 lpfc_nlp_init(struct lpfc_vport
*vport
, struct lpfc_nodelist
*ndlp
,
5357 memset(ndlp
, 0, sizeof (struct lpfc_nodelist
));
5359 lpfc_initialize_node(vport
, ndlp
, did
);
5360 INIT_LIST_HEAD(&ndlp
->nlp_listp
);
5362 lpfc_debugfs_disc_trc(vport
, LPFC_DISC_TRC_NODE
,
5363 "node init: did:x%x",
5364 ndlp
->nlp_DID
, 0, 0);
5369 /* This routine releases all resources associated with a specifc NPort's ndlp
5370 * and mempool_free's the nodelist.
5373 lpfc_nlp_release(struct kref
*kref
)
5375 struct lpfc_hba
*phba
;
5376 unsigned long flags
;
5377 struct lpfc_nodelist
*ndlp
= container_of(kref
, struct lpfc_nodelist
,
5380 lpfc_debugfs_disc_trc(ndlp
->vport
, LPFC_DISC_TRC_NODE
,
5381 "node release: did:x%x flg:x%x type:x%x",
5382 ndlp
->nlp_DID
, ndlp
->nlp_flag
, ndlp
->nlp_type
);
5384 lpfc_printf_vlog(ndlp
->vport
, KERN_INFO
, LOG_NODE
,
5385 "0279 lpfc_nlp_release: ndlp:x%p "
5386 "usgmap:x%x refcnt:%d\n",
5387 (void *)ndlp
, ndlp
->nlp_usg_map
,
5388 atomic_read(&ndlp
->kref
.refcount
));
5390 /* remove ndlp from action. */
5391 lpfc_nlp_remove(ndlp
->vport
, ndlp
);
5393 /* clear the ndlp active flag for all release cases */
5395 spin_lock_irqsave(&phba
->ndlp_lock
, flags
);
5396 NLP_CLR_NODE_ACT(ndlp
);
5397 spin_unlock_irqrestore(&phba
->ndlp_lock
, flags
);
5398 if (phba
->sli_rev
== LPFC_SLI_REV4
)
5399 lpfc_sli4_free_rpi(phba
, ndlp
->nlp_rpi
);
5401 /* free ndlp memory for final ndlp release */
5402 if (NLP_CHK_FREE_REQ(ndlp
)) {
5403 kfree(ndlp
->lat_data
);
5404 mempool_free(ndlp
, ndlp
->phba
->nlp_mem_pool
);
5408 /* This routine bumps the reference count for a ndlp structure to ensure
5409 * that one discovery thread won't free a ndlp while another discovery thread
5412 struct lpfc_nodelist
*
5413 lpfc_nlp_get(struct lpfc_nodelist
*ndlp
)
5415 struct lpfc_hba
*phba
;
5416 unsigned long flags
;
5419 lpfc_debugfs_disc_trc(ndlp
->vport
, LPFC_DISC_TRC_NODE
,
5420 "node get: did:x%x flg:x%x refcnt:x%x",
5421 ndlp
->nlp_DID
, ndlp
->nlp_flag
,
5422 atomic_read(&ndlp
->kref
.refcount
));
5423 /* The check of ndlp usage to prevent incrementing the
5424 * ndlp reference count that is in the process of being
5428 spin_lock_irqsave(&phba
->ndlp_lock
, flags
);
5429 if (!NLP_CHK_NODE_ACT(ndlp
) || NLP_CHK_FREE_ACK(ndlp
)) {
5430 spin_unlock_irqrestore(&phba
->ndlp_lock
, flags
);
5431 lpfc_printf_vlog(ndlp
->vport
, KERN_WARNING
, LOG_NODE
,
5432 "0276 lpfc_nlp_get: ndlp:x%p "
5433 "usgmap:x%x refcnt:%d\n",
5434 (void *)ndlp
, ndlp
->nlp_usg_map
,
5435 atomic_read(&ndlp
->kref
.refcount
));
5438 kref_get(&ndlp
->kref
);
5439 spin_unlock_irqrestore(&phba
->ndlp_lock
, flags
);
5444 /* This routine decrements the reference count for a ndlp structure. If the
5445 * count goes to 0, this indicates the the associated nodelist should be
5446 * freed. Returning 1 indicates the ndlp resource has been released; on the
5447 * other hand, returning 0 indicates the ndlp resource has not been released
5451 lpfc_nlp_put(struct lpfc_nodelist
*ndlp
)
5453 struct lpfc_hba
*phba
;
5454 unsigned long flags
;
5459 lpfc_debugfs_disc_trc(ndlp
->vport
, LPFC_DISC_TRC_NODE
,
5460 "node put: did:x%x flg:x%x refcnt:x%x",
5461 ndlp
->nlp_DID
, ndlp
->nlp_flag
,
5462 atomic_read(&ndlp
->kref
.refcount
));
5464 spin_lock_irqsave(&phba
->ndlp_lock
, flags
);
5465 /* Check the ndlp memory free acknowledge flag to avoid the
5466 * possible race condition that kref_put got invoked again
5467 * after previous one has done ndlp memory free.
5469 if (NLP_CHK_FREE_ACK(ndlp
)) {
5470 spin_unlock_irqrestore(&phba
->ndlp_lock
, flags
);
5471 lpfc_printf_vlog(ndlp
->vport
, KERN_WARNING
, LOG_NODE
,
5472 "0274 lpfc_nlp_put: ndlp:x%p "
5473 "usgmap:x%x refcnt:%d\n",
5474 (void *)ndlp
, ndlp
->nlp_usg_map
,
5475 atomic_read(&ndlp
->kref
.refcount
));
5478 /* Check the ndlp inactivate log flag to avoid the possible
5479 * race condition that kref_put got invoked again after ndlp
5480 * is already in inactivating state.
5482 if (NLP_CHK_IACT_REQ(ndlp
)) {
5483 spin_unlock_irqrestore(&phba
->ndlp_lock
, flags
);
5484 lpfc_printf_vlog(ndlp
->vport
, KERN_WARNING
, LOG_NODE
,
5485 "0275 lpfc_nlp_put: ndlp:x%p "
5486 "usgmap:x%x refcnt:%d\n",
5487 (void *)ndlp
, ndlp
->nlp_usg_map
,
5488 atomic_read(&ndlp
->kref
.refcount
));
5491 /* For last put, mark the ndlp usage flags to make sure no
5492 * other kref_get and kref_put on the same ndlp shall get
5493 * in between the process when the final kref_put has been
5494 * invoked on this ndlp.
5496 if (atomic_read(&ndlp
->kref
.refcount
) == 1) {
5497 /* Indicate ndlp is put to inactive state. */
5498 NLP_SET_IACT_REQ(ndlp
);
5499 /* Acknowledge ndlp memory free has been seen. */
5500 if (NLP_CHK_FREE_REQ(ndlp
))
5501 NLP_SET_FREE_ACK(ndlp
);
5503 spin_unlock_irqrestore(&phba
->ndlp_lock
, flags
);
5504 /* Note, the kref_put returns 1 when decrementing a reference
5505 * count that was 1, it invokes the release callback function,
5506 * but it still left the reference count as 1 (not actually
5507 * performs the last decrementation). Otherwise, it actually
5508 * decrements the reference count and returns 0.
5510 return kref_put(&ndlp
->kref
, lpfc_nlp_release
);
5513 /* This routine free's the specified nodelist if it is not in use
5514 * by any other discovery thread. This routine returns 1 if the
5515 * ndlp has been freed. A return value of 0 indicates the ndlp is
5516 * not yet been released.
5519 lpfc_nlp_not_used(struct lpfc_nodelist
*ndlp
)
5521 lpfc_debugfs_disc_trc(ndlp
->vport
, LPFC_DISC_TRC_NODE
,
5522 "node not used: did:x%x flg:x%x refcnt:x%x",
5523 ndlp
->nlp_DID
, ndlp
->nlp_flag
,
5524 atomic_read(&ndlp
->kref
.refcount
));
5525 if (atomic_read(&ndlp
->kref
.refcount
) == 1)
5526 if (lpfc_nlp_put(ndlp
))
5532 * lpfc_fcf_inuse - Check if FCF can be unregistered.
5533 * @phba: Pointer to hba context object.
5535 * This function iterate through all FC nodes associated
5536 * will all vports to check if there is any node with
5537 * fc_rports associated with it. If there is an fc_rport
5538 * associated with the node, then the node is either in
5539 * discovered state or its devloss_timer is pending.
5542 lpfc_fcf_inuse(struct lpfc_hba
*phba
)
5544 struct lpfc_vport
**vports
;
5546 struct lpfc_nodelist
*ndlp
;
5547 struct Scsi_Host
*shost
;
5549 vports
= lpfc_create_vport_work_array(phba
);
5551 /* If driver cannot allocate memory, indicate fcf is in use */
5555 for (i
= 0; i
<= phba
->max_vports
&& vports
[i
] != NULL
; i
++) {
5556 shost
= lpfc_shost_from_vport(vports
[i
]);
5557 spin_lock_irq(shost
->host_lock
);
5559 * IF the CVL_RCVD bit is not set then we have sent the
5561 * If dev_loss fires while we are waiting we do not want to
5564 if (!(vports
[i
]->fc_flag
& FC_VPORT_CVL_RCVD
)) {
5565 spin_unlock_irq(shost
->host_lock
);
5569 list_for_each_entry(ndlp
, &vports
[i
]->fc_nodes
, nlp_listp
) {
5570 if (NLP_CHK_NODE_ACT(ndlp
) && ndlp
->rport
&&
5571 (ndlp
->rport
->roles
& FC_RPORT_ROLE_FCP_TARGET
)) {
5573 spin_unlock_irq(shost
->host_lock
);
5576 lpfc_printf_log(phba
, KERN_INFO
, LOG_ELS
,
5577 "2624 RPI %x DID %x flg %x still "
5579 ndlp
->nlp_rpi
, ndlp
->nlp_DID
,
5581 if (ndlp
->nlp_flag
& NLP_RPI_REGISTERED
)
5585 spin_unlock_irq(shost
->host_lock
);
5588 lpfc_destroy_vport_work_array(phba
, vports
);
5593 * lpfc_unregister_vfi_cmpl - Completion handler for unreg vfi.
5594 * @phba: Pointer to hba context object.
5595 * @mboxq: Pointer to mailbox object.
5597 * This function frees memory associated with the mailbox command.
5600 lpfc_unregister_vfi_cmpl(struct lpfc_hba
*phba
, LPFC_MBOXQ_t
*mboxq
)
5602 struct lpfc_vport
*vport
= mboxq
->vport
;
5603 struct Scsi_Host
*shost
= lpfc_shost_from_vport(vport
);
5605 if (mboxq
->u
.mb
.mbxStatus
) {
5606 lpfc_printf_log(phba
, KERN_ERR
, LOG_DISCOVERY
|LOG_MBOX
,
5607 "2555 UNREG_VFI mbxStatus error x%x "
5609 mboxq
->u
.mb
.mbxStatus
, vport
->port_state
);
5611 spin_lock_irq(shost
->host_lock
);
5612 phba
->pport
->fc_flag
&= ~FC_VFI_REGISTERED
;
5613 spin_unlock_irq(shost
->host_lock
);
5614 mempool_free(mboxq
, phba
->mbox_mem_pool
);
5619 * lpfc_unregister_fcfi_cmpl - Completion handler for unreg fcfi.
5620 * @phba: Pointer to hba context object.
5621 * @mboxq: Pointer to mailbox object.
5623 * This function frees memory associated with the mailbox command.
5626 lpfc_unregister_fcfi_cmpl(struct lpfc_hba
*phba
, LPFC_MBOXQ_t
*mboxq
)
5628 struct lpfc_vport
*vport
= mboxq
->vport
;
5630 if (mboxq
->u
.mb
.mbxStatus
) {
5631 lpfc_printf_log(phba
, KERN_ERR
, LOG_DISCOVERY
|LOG_MBOX
,
5632 "2550 UNREG_FCFI mbxStatus error x%x "
5634 mboxq
->u
.mb
.mbxStatus
, vport
->port_state
);
5636 mempool_free(mboxq
, phba
->mbox_mem_pool
);
5641 * lpfc_unregister_fcf_prep - Unregister fcf record preparation
5642 * @phba: Pointer to hba context object.
5644 * This function prepare the HBA for unregistering the currently registered
5645 * FCF from the HBA. It performs unregistering, in order, RPIs, VPIs, and
5649 lpfc_unregister_fcf_prep(struct lpfc_hba
*phba
)
5652 struct lpfc_vport
**vports
;
5653 struct lpfc_nodelist
*ndlp
;
5654 struct Scsi_Host
*shost
;
5657 /* Unregister RPIs */
5658 if (lpfc_fcf_inuse(phba
))
5659 lpfc_unreg_hba_rpis(phba
);
5661 /* At this point, all discovery is aborted */
5662 phba
->pport
->port_state
= LPFC_VPORT_UNKNOWN
;
5664 /* Unregister VPIs */
5665 vports
= lpfc_create_vport_work_array(phba
);
5666 if (vports
&& (phba
->sli3_options
& LPFC_SLI3_NPIV_ENABLED
))
5667 for (i
= 0; i
<= phba
->max_vports
&& vports
[i
] != NULL
; i
++) {
5668 /* Stop FLOGI/FDISC retries */
5669 ndlp
= lpfc_findnode_did(vports
[i
], Fabric_DID
);
5671 lpfc_cancel_retry_delay_tmo(vports
[i
], ndlp
);
5672 lpfc_cleanup_pending_mbox(vports
[i
]);
5673 if (phba
->sli_rev
== LPFC_SLI_REV4
)
5674 lpfc_sli4_unreg_all_rpis(vports
[i
]);
5675 lpfc_mbx_unreg_vpi(vports
[i
]);
5676 shost
= lpfc_shost_from_vport(vports
[i
]);
5677 spin_lock_irq(shost
->host_lock
);
5678 vports
[i
]->fc_flag
|= FC_VPORT_NEEDS_INIT_VPI
;
5679 vports
[i
]->vpi_state
&= ~LPFC_VPI_REGISTERED
;
5680 spin_unlock_irq(shost
->host_lock
);
5682 lpfc_destroy_vport_work_array(phba
, vports
);
5684 /* Cleanup any outstanding ELS commands */
5685 lpfc_els_flush_all_cmd(phba
);
5687 /* Unregister VFI */
5688 mbox
= mempool_alloc(phba
->mbox_mem_pool
, GFP_KERNEL
);
5690 lpfc_printf_log(phba
, KERN_ERR
, LOG_DISCOVERY
|LOG_MBOX
,
5691 "2556 UNREG_VFI mbox allocation failed"
5692 "HBA state x%x\n", phba
->pport
->port_state
);
5696 lpfc_unreg_vfi(mbox
, phba
->pport
);
5697 mbox
->vport
= phba
->pport
;
5698 mbox
->mbox_cmpl
= lpfc_unregister_vfi_cmpl
;
5700 rc
= lpfc_sli_issue_mbox(phba
, mbox
, MBX_NOWAIT
);
5701 if (rc
== MBX_NOT_FINISHED
) {
5702 lpfc_printf_log(phba
, KERN_ERR
, LOG_DISCOVERY
|LOG_MBOX
,
5703 "2557 UNREG_VFI issue mbox failed rc x%x "
5705 rc
, phba
->pport
->port_state
);
5706 mempool_free(mbox
, phba
->mbox_mem_pool
);
5710 shost
= lpfc_shost_from_vport(phba
->pport
);
5711 spin_lock_irq(shost
->host_lock
);
5712 phba
->pport
->fc_flag
&= ~FC_VFI_REGISTERED
;
5713 spin_unlock_irq(shost
->host_lock
);
5719 * lpfc_sli4_unregister_fcf - Unregister currently registered FCF record
5720 * @phba: Pointer to hba context object.
5722 * This function issues synchronous unregister FCF mailbox command to HBA to
5723 * unregister the currently registered FCF record. The driver does not reset
5724 * the driver FCF usage state flags.
5726 * Return 0 if successfully issued, none-zero otherwise.
5729 lpfc_sli4_unregister_fcf(struct lpfc_hba
*phba
)
5734 mbox
= mempool_alloc(phba
->mbox_mem_pool
, GFP_KERNEL
);
5736 lpfc_printf_log(phba
, KERN_ERR
, LOG_DISCOVERY
|LOG_MBOX
,
5737 "2551 UNREG_FCFI mbox allocation failed"
5738 "HBA state x%x\n", phba
->pport
->port_state
);
5741 lpfc_unreg_fcfi(mbox
, phba
->fcf
.fcfi
);
5742 mbox
->vport
= phba
->pport
;
5743 mbox
->mbox_cmpl
= lpfc_unregister_fcfi_cmpl
;
5744 rc
= lpfc_sli_issue_mbox(phba
, mbox
, MBX_NOWAIT
);
5746 if (rc
== MBX_NOT_FINISHED
) {
5747 lpfc_printf_log(phba
, KERN_ERR
, LOG_SLI
,
5748 "2552 Unregister FCFI command failed rc x%x "
5750 rc
, phba
->pport
->port_state
);
5757 * lpfc_unregister_fcf_rescan - Unregister currently registered fcf and rescan
5758 * @phba: Pointer to hba context object.
5760 * This function unregisters the currently reigstered FCF. This function
5761 * also tries to find another FCF for discovery by rescan the HBA FCF table.
5764 lpfc_unregister_fcf_rescan(struct lpfc_hba
*phba
)
5768 /* Preparation for unregistering fcf */
5769 rc
= lpfc_unregister_fcf_prep(phba
);
5771 lpfc_printf_log(phba
, KERN_ERR
, LOG_DISCOVERY
,
5772 "2748 Failed to prepare for unregistering "
5773 "HBA's FCF record: rc=%d\n", rc
);
5777 /* Now, unregister FCF record and reset HBA FCF state */
5778 rc
= lpfc_sli4_unregister_fcf(phba
);
5781 /* Reset HBA FCF states after successful unregister FCF */
5782 phba
->fcf
.fcf_flag
= 0;
5783 phba
->fcf
.current_rec
.flag
= 0;
5786 * If driver is not unloading, check if there is any other
5787 * FCF record that can be used for discovery.
5789 if ((phba
->pport
->load_flag
& FC_UNLOADING
) ||
5790 (phba
->link_state
< LPFC_LINK_UP
))
5793 /* This is considered as the initial FCF discovery scan */
5794 spin_lock_irq(&phba
->hbalock
);
5795 phba
->fcf
.fcf_flag
|= FCF_INIT_DISC
;
5796 spin_unlock_irq(&phba
->hbalock
);
5798 /* Reset FCF roundrobin bmask for new discovery */
5799 lpfc_sli4_clear_fcf_rr_bmask(phba
);
5801 rc
= lpfc_sli4_fcf_scan_read_fcf_rec(phba
, LPFC_FCOE_FCF_GET_FIRST
);
5804 spin_lock_irq(&phba
->hbalock
);
5805 phba
->fcf
.fcf_flag
&= ~FCF_INIT_DISC
;
5806 spin_unlock_irq(&phba
->hbalock
);
5807 lpfc_printf_log(phba
, KERN_ERR
, LOG_DISCOVERY
|LOG_MBOX
,
5808 "2553 lpfc_unregister_unused_fcf failed "
5809 "to read FCF record HBA state x%x\n",
5810 phba
->pport
->port_state
);
5815 * lpfc_unregister_fcf - Unregister the currently registered fcf record
5816 * @phba: Pointer to hba context object.
5818 * This function just unregisters the currently reigstered FCF. It does not
5819 * try to find another FCF for discovery.
5822 lpfc_unregister_fcf(struct lpfc_hba
*phba
)
5826 /* Preparation for unregistering fcf */
5827 rc
= lpfc_unregister_fcf_prep(phba
);
5829 lpfc_printf_log(phba
, KERN_ERR
, LOG_DISCOVERY
,
5830 "2749 Failed to prepare for unregistering "
5831 "HBA's FCF record: rc=%d\n", rc
);
5835 /* Now, unregister FCF record and reset HBA FCF state */
5836 rc
= lpfc_sli4_unregister_fcf(phba
);
5839 /* Set proper HBA FCF states after successful unregister FCF */
5840 spin_lock_irq(&phba
->hbalock
);
5841 phba
->fcf
.fcf_flag
&= ~FCF_REGISTERED
;
5842 spin_unlock_irq(&phba
->hbalock
);
5846 * lpfc_unregister_unused_fcf - Unregister FCF if all devices are disconnected.
5847 * @phba: Pointer to hba context object.
5849 * This function check if there are any connected remote port for the FCF and
5850 * if all the devices are disconnected, this function unregister FCFI.
5851 * This function also tries to use another FCF for discovery.
5854 lpfc_unregister_unused_fcf(struct lpfc_hba
*phba
)
5857 * If HBA is not running in FIP mode, if HBA does not support
5858 * FCoE, if FCF discovery is ongoing, or if FCF has not been
5859 * registered, do nothing.
5861 spin_lock_irq(&phba
->hbalock
);
5862 if (!(phba
->hba_flag
& HBA_FCOE_MODE
) ||
5863 !(phba
->fcf
.fcf_flag
& FCF_REGISTERED
) ||
5864 !(phba
->hba_flag
& HBA_FIP_SUPPORT
) ||
5865 (phba
->fcf
.fcf_flag
& FCF_DISCOVERY
) ||
5866 (phba
->pport
->port_state
== LPFC_FLOGI
)) {
5867 spin_unlock_irq(&phba
->hbalock
);
5870 spin_unlock_irq(&phba
->hbalock
);
5872 if (lpfc_fcf_inuse(phba
))
5875 lpfc_unregister_fcf_rescan(phba
);
5879 * lpfc_read_fcf_conn_tbl - Create driver FCF connection table.
5880 * @phba: Pointer to hba context object.
5881 * @buff: Buffer containing the FCF connection table as in the config
5883 * This function create driver data structure for the FCF connection
5884 * record table read from config region 23.
5887 lpfc_read_fcf_conn_tbl(struct lpfc_hba
*phba
,
5890 struct lpfc_fcf_conn_entry
*conn_entry
, *next_conn_entry
;
5891 struct lpfc_fcf_conn_hdr
*conn_hdr
;
5892 struct lpfc_fcf_conn_rec
*conn_rec
;
5893 uint32_t record_count
;
5896 /* Free the current connect table */
5897 list_for_each_entry_safe(conn_entry
, next_conn_entry
,
5898 &phba
->fcf_conn_rec_list
, list
) {
5899 list_del_init(&conn_entry
->list
);
5903 conn_hdr
= (struct lpfc_fcf_conn_hdr
*) buff
;
5904 record_count
= conn_hdr
->length
* sizeof(uint32_t)/
5905 sizeof(struct lpfc_fcf_conn_rec
);
5907 conn_rec
= (struct lpfc_fcf_conn_rec
*)
5908 (buff
+ sizeof(struct lpfc_fcf_conn_hdr
));
5910 for (i
= 0; i
< record_count
; i
++) {
5911 if (!(conn_rec
[i
].flags
& FCFCNCT_VALID
))
5913 conn_entry
= kzalloc(sizeof(struct lpfc_fcf_conn_entry
),
5916 lpfc_printf_log(phba
, KERN_ERR
, LOG_INIT
,
5917 "2566 Failed to allocate connection"
5922 memcpy(&conn_entry
->conn_rec
, &conn_rec
[i
],
5923 sizeof(struct lpfc_fcf_conn_rec
));
5924 conn_entry
->conn_rec
.vlan_tag
=
5925 le16_to_cpu(conn_entry
->conn_rec
.vlan_tag
) & 0xFFF;
5926 conn_entry
->conn_rec
.flags
=
5927 le16_to_cpu(conn_entry
->conn_rec
.flags
);
5928 list_add_tail(&conn_entry
->list
,
5929 &phba
->fcf_conn_rec_list
);
5934 * lpfc_read_fcoe_param - Read FCoe parameters from conf region..
5935 * @phba: Pointer to hba context object.
5936 * @buff: Buffer containing the FCoE parameter data structure.
5938 * This function update driver data structure with config
5939 * parameters read from config region 23.
5942 lpfc_read_fcoe_param(struct lpfc_hba
*phba
,
5945 struct lpfc_fip_param_hdr
*fcoe_param_hdr
;
5946 struct lpfc_fcoe_params
*fcoe_param
;
5948 fcoe_param_hdr
= (struct lpfc_fip_param_hdr
*)
5950 fcoe_param
= (struct lpfc_fcoe_params
*)
5951 (buff
+ sizeof(struct lpfc_fip_param_hdr
));
5953 if ((fcoe_param_hdr
->parm_version
!= FIPP_VERSION
) ||
5954 (fcoe_param_hdr
->length
!= FCOE_PARAM_LENGTH
))
5957 if (fcoe_param_hdr
->parm_flags
& FIPP_VLAN_VALID
) {
5958 phba
->valid_vlan
= 1;
5959 phba
->vlan_id
= le16_to_cpu(fcoe_param
->vlan_tag
) &
5963 phba
->fc_map
[0] = fcoe_param
->fc_map
[0];
5964 phba
->fc_map
[1] = fcoe_param
->fc_map
[1];
5965 phba
->fc_map
[2] = fcoe_param
->fc_map
[2];
5970 * lpfc_get_rec_conf23 - Get a record type in config region data.
5971 * @buff: Buffer containing config region 23 data.
5972 * @size: Size of the data buffer.
5973 * @rec_type: Record type to be searched.
5975 * This function searches config region data to find the beginning
5976 * of the record specified by record_type. If record found, this
5977 * function return pointer to the record else return NULL.
5980 lpfc_get_rec_conf23(uint8_t *buff
, uint32_t size
, uint8_t rec_type
)
5982 uint32_t offset
= 0, rec_length
;
5984 if ((buff
[0] == LPFC_REGION23_LAST_REC
) ||
5985 (size
< sizeof(uint32_t)))
5988 rec_length
= buff
[offset
+ 1];
5991 * One TLV record has one word header and number of data words
5992 * specified in the rec_length field of the record header.
5994 while ((offset
+ rec_length
* sizeof(uint32_t) + sizeof(uint32_t))
5996 if (buff
[offset
] == rec_type
)
5997 return &buff
[offset
];
5999 if (buff
[offset
] == LPFC_REGION23_LAST_REC
)
6002 offset
+= rec_length
* sizeof(uint32_t) + sizeof(uint32_t);
6003 rec_length
= buff
[offset
+ 1];
6009 * lpfc_parse_fcoe_conf - Parse FCoE config data read from config region 23.
6010 * @phba: Pointer to lpfc_hba data structure.
6011 * @buff: Buffer containing config region 23 data.
6012 * @size: Size of the data buffer.
6014 * This function parses the FCoE config parameters in config region 23 and
6015 * populate driver data structure with the parameters.
6018 lpfc_parse_fcoe_conf(struct lpfc_hba
*phba
,
6022 uint32_t offset
= 0, rec_length
;
6026 * If data size is less than 2 words signature and version cannot be
6029 if (size
< 2*sizeof(uint32_t))
6032 /* Check the region signature first */
6033 if (memcmp(buff
, LPFC_REGION23_SIGNATURE
, 4)) {
6034 lpfc_printf_log(phba
, KERN_ERR
, LOG_INIT
,
6035 "2567 Config region 23 has bad signature\n");
6041 /* Check the data structure version */
6042 if (buff
[offset
] != LPFC_REGION23_VERSION
) {
6043 lpfc_printf_log(phba
, KERN_ERR
, LOG_INIT
,
6044 "2568 Config region 23 has bad version\n");
6049 rec_length
= buff
[offset
+ 1];
6051 /* Read FCoE param record */
6052 rec_ptr
= lpfc_get_rec_conf23(&buff
[offset
],
6053 size
- offset
, FCOE_PARAM_TYPE
);
6055 lpfc_read_fcoe_param(phba
, rec_ptr
);
6057 /* Read FCF connection table */
6058 rec_ptr
= lpfc_get_rec_conf23(&buff
[offset
],
6059 size
- offset
, FCOE_CONN_TBL_TYPE
);
6061 lpfc_read_fcf_conn_tbl(phba
, rec_ptr
);