?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
[SCSI] Deprecate SCSI_PROT_*_CONVERT operations
[linux-2.6/next.git] / arch / arm / mach-integrator / impd1.c
blob0058c937719ed7f7400fe8a1388e9c9e8f73e777
1 /*
2 * linux/arch/arm/mach-integrator/impd1.c
3 *
4 * Copyright (C) 2003 Deep Blue Solutions Ltd, All Rights Reserved.
5 *
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License version 2 as
8 * published by the Free Software Foundation.
9 *
10 * This file provides the core support for the IM-PD1 module.
11 *
12 * Module / boot parameters.
13 * lmid=n impd1.lmid=n - set the logic module position in stack to 'n'
14 */
15 #include <linux/module.h>
16 #include <linux/moduleparam.h>
17 #include <linux/init.h>
18 #include <linux/device.h>
19 #include <linux/errno.h>
20 #include <linux/mm.h>
21 #include <linux/amba/bus.h>
22 #include <linux/amba/clcd.h>
23 #include <linux/io.h>
24
25 #include <asm/clkdev.h>
26 #include <mach/clkdev.h>
27 #include <asm/hardware/icst525.h>
28 #include <mach/lm.h>
29 #include <mach/impd1.h>
30 #include <asm/sizes.h>
31
32 static int module_id;
33
34 module_param_named(lmid, module_id, int, 0444);
35 MODULE_PARM_DESC(lmid, "logic module stack position");
36
37 struct impd1_module {
38 void __iomem *base;
39 struct clk vcos[2];
40 struct clk_lookup *clks[3];
41 };
42
43 static const struct icst525_params impd1_vco_params = {
44 .ref = 24000, /* 24 MHz */
45 .vco_max = 200000, /* 200 MHz */
46 .vd_min = 12,
47 .vd_max = 519,
48 .rd_min = 3,
49 .rd_max = 120,
50 };
51
52 static void impd1_setvco(struct clk *clk, struct icst525_vco vco)
53 {
54 struct impd1_module *impd1 = clk->data;
55 int vconr = clk - impd1->vcos;
56 u32 val;
57
58 val = vco.v | (vco.r << 9) | (vco.s << 16);
59
60 writel(0xa05f, impd1->base + IMPD1_LOCK);
61 switch (vconr) {
62 case 0:
63 writel(val, impd1->base + IMPD1_OSC1);
64 break;
65 case 1:
66 writel(val, impd1->base + IMPD1_OSC2);
67 break;
68 }
69 writel(0, impd1->base + IMPD1_LOCK);
70
71 #ifdef DEBUG
72 vco.v = val & 0x1ff;
73 vco.r = (val >> 9) & 0x7f;
74 vco.s = (val >> 16) & 7;
75
76 pr_debug("IM-PD1: VCO%d clock is %ld kHz\n",
77 vconr, icst525_khz(&impd1_vco_params, vco));
78 #endif
79 }
80
81 void impd1_tweak_control(struct device *dev, u32 mask, u32 val)
82 {
83 struct impd1_module *impd1 = dev_get_drvdata(dev);
84 u32 cur;
85
86 val &= mask;
87 cur = readl(impd1->base + IMPD1_CTRL) & ~mask;
88 writel(cur | val, impd1->base + IMPD1_CTRL);
89 }
90
91 EXPORT_SYMBOL(impd1_tweak_control);
92
93 /*
94 * CLCD support
95 */
96 #define PANEL PROSPECTOR
97
98 #define LTM10C209 1
99 #define PROSPECTOR 2
100 #define SVGA 3
101 #define VGA 4
102
103 #if PANEL == VGA
104 #define PANELTYPE vga
105 static struct clcd_panel vga = {
106 .mode = {
107 .name = "VGA",
108 .refresh = 60,
109 .xres = 640,
110 .yres = 480,
111 .pixclock = 39721,
112 .left_margin = 40,
113 .right_margin = 24,
114 .upper_margin = 32,
115 .lower_margin = 11,
116 .hsync_len = 96,
117 .vsync_len = 2,
118 .sync = 0,
119 .vmode = FB_VMODE_NONINTERLACED,
120 },
121 .width = -1,
122 .height = -1,
123 .tim2 = TIM2_BCD | TIM2_IPC,
124 .cntl = CNTL_LCDTFT | CNTL_LCDVCOMP(1),
125 .connector = IMPD1_CTRL_DISP_VGA,
126 .bpp = 16,
127 .grayscale = 0,
128 };
129
130 #elif PANEL == SVGA
131 #define PANELTYPE svga
132 static struct clcd_panel svga = {
133 .mode = {
134 .name = "SVGA",
135 .refresh = 0,
136 .xres = 800,
137 .yres = 600,
138 .pixclock = 27778,
139 .left_margin = 20,
140 .right_margin = 20,
141 .upper_margin = 5,
142 .lower_margin = 5,
143 .hsync_len = 164,
144 .vsync_len = 62,
145 .sync = 0,
146 .vmode = FB_VMODE_NONINTERLACED,
147 },
148 .width = -1,
149 .height = -1,
150 .tim2 = TIM2_BCD,
151 .cntl = CNTL_LCDTFT | CNTL_LCDVCOMP(1),
152 .connector = IMPD1_CTRL_DISP_VGA,
153 .bpp = 16,
154 .grayscale = 0,
155 };
156
157 #elif PANEL == PROSPECTOR
158 #define PANELTYPE prospector
159 static struct clcd_panel prospector = {
160 .mode = {
161 .name = "PROSPECTOR",
162 .refresh = 0,
163 .xres = 640,
164 .yres = 480,
165 .pixclock = 40000,
166 .left_margin = 33,
167 .right_margin = 64,
168 .upper_margin = 36,
169 .lower_margin = 7,
170 .hsync_len = 64,
171 .vsync_len = 25,
172 .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
173 .vmode = FB_VMODE_NONINTERLACED,
174 },
175 .width = -1,
176 .height = -1,
177 .tim2 = TIM2_BCD,
178 .cntl = CNTL_LCDTFT | CNTL_LCDVCOMP(1),
179 .fixedtimings = 1,
180 .connector = IMPD1_CTRL_DISP_LCD,
181 .bpp = 16,
182 .grayscale = 0,
183 };
184
185 #elif PANEL == LTM10C209
186 #define PANELTYPE ltm10c209
187 /*
188 * Untested.
189 */
190 static struct clcd_panel ltm10c209 = {
191 .mode = {
192 .name = "LTM10C209",
193 .refresh = 0,
194 .xres = 640,
195 .yres = 480,
196 .pixclock = 40000,
197 .left_margin = 20,
198 .right_margin = 20,
199 .upper_margin = 19,
200 .lower_margin = 19,
201 .hsync_len = 20,
202 .vsync_len = 10,
203 .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
204 .vmode = FB_VMODE_NONINTERLACED,
205 },
206 .width = -1,
207 .height = -1,
208 .tim2 = TIM2_BCD,
209 .cntl = CNTL_LCDTFT | CNTL_LCDVCOMP(1),
210 .fixedtimings = 1,
211 .connector = IMPD1_CTRL_DISP_LCD,
212 .bpp = 16,
213 .grayscale = 0,
214 };
215 #endif
216
217 /*
218 * Disable all display connectors on the interface module.
219 */
220 static void impd1fb_clcd_disable(struct clcd_fb *fb)
221 {
222 impd1_tweak_control(fb->dev->dev.parent, IMPD1_CTRL_DISP_MASK, 0);
223 }
224
225 /*
226 * Enable the relevant connector on the interface module.
227 */
228 static void impd1fb_clcd_enable(struct clcd_fb *fb)
229 {
230 impd1_tweak_control(fb->dev->dev.parent, IMPD1_CTRL_DISP_MASK,
231 fb->panel->connector | IMPD1_CTRL_DISP_ENABLE);
232 }
233
234 static int impd1fb_clcd_setup(struct clcd_fb *fb)
235 {
236 unsigned long framebase = fb->dev->res.start + 0x01000000;
237 unsigned long framesize = SZ_1M;
238 int ret = 0;
239
240 fb->panel = &PANELTYPE;
241
242 if (!request_mem_region(framebase, framesize, "clcd framebuffer")) {
243 printk(KERN_ERR "IM-PD1: unable to reserve framebuffer\n");
244 return -EBUSY;
245 }
246
247 fb->fb.screen_base = ioremap(framebase, framesize);
248 if (!fb->fb.screen_base) {
249 printk(KERN_ERR "IM-PD1: unable to map framebuffer\n");
250 ret = -ENOMEM;
251 goto free_buffer;
252 }
253
254 fb->fb.fix.smem_start = framebase;
255 fb->fb.fix.smem_len = framesize;
256
257 return 0;
258
259 free_buffer:
260 release_mem_region(framebase, framesize);
261 return ret;
262 }
263
264 static int impd1fb_clcd_mmap(struct clcd_fb *fb, struct vm_area_struct *vma)
265 {
266 unsigned long start, size;
267
268 start = vma->vm_pgoff + (fb->fb.fix.smem_start >> PAGE_SHIFT);
269 size = vma->vm_end - vma->vm_start;
270
271 return remap_pfn_range(vma, vma->vm_start, start, size,
272 vma->vm_page_prot);
273 }
274
275 static void impd1fb_clcd_remove(struct clcd_fb *fb)
276 {
277 iounmap(fb->fb.screen_base);
278 release_mem_region(fb->fb.fix.smem_start, fb->fb.fix.smem_len);
279 }
280
281 static struct clcd_board impd1_clcd_data = {
282 .name = "IM-PD/1",
283 .check = clcdfb_check,
284 .decode = clcdfb_decode,
285 .disable = impd1fb_clcd_disable,
286 .enable = impd1fb_clcd_enable,
287 .setup = impd1fb_clcd_setup,
288 .mmap = impd1fb_clcd_mmap,
289 .remove = impd1fb_clcd_remove,
290 };
291
292 struct impd1_device {
293 unsigned long offset;
294 unsigned int irq[2];
295 unsigned int id;
296 void *platform_data;
297 };
298
299 static struct impd1_device impd1_devs[] = {
300 {
301 .offset = 0x03000000,
302 .id = 0x00041190,
303 }, {
304 .offset = 0x00100000,
305 .irq = { 1 },
306 .id = 0x00141011,
307 }, {
308 .offset = 0x00200000,
309 .irq = { 2 },
310 .id = 0x00141011,
311 }, {
312 .offset = 0x00300000,
313 .irq = { 3 },
314 .id = 0x00041022,
315 }, {
316 .offset = 0x00400000,
317 .irq = { 4 },
318 .id = 0x00041061,
319 }, {
320 .offset = 0x00500000,
321 .irq = { 5 },
322 .id = 0x00041061,
323 }, {
324 .offset = 0x00600000,
325 .irq = { 6 },
326 .id = 0x00041130,
327 }, {
328 .offset = 0x00700000,
329 .irq = { 7, 8 },
330 .id = 0x00041181,
331 }, {
332 .offset = 0x00800000,
333 .irq = { 9 },
334 .id = 0x00041041,
335 }, {
336 .offset = 0x01000000,
337 .irq = { 11 },
338 .id = 0x00041110,
339 .platform_data = &impd1_clcd_data,
340 }
341 };
342
343 static struct clk fixed_14745600 = {
344 .rate = 14745600,
345 };
346
347 static int impd1_probe(struct lm_device *dev)
348 {
349 struct impd1_module *impd1;
350 int i, ret;
351
352 if (dev->id != module_id)
353 return -EINVAL;
354
355 if (!request_mem_region(dev->resource.start, SZ_4K, "LM registers"))
356 return -EBUSY;
357
358 impd1 = kzalloc(sizeof(struct impd1_module), GFP_KERNEL);
359 if (!impd1) {
360 ret = -ENOMEM;
361 goto release_lm;
362 }
363
364 impd1->base = ioremap(dev->resource.start, SZ_4K);
365 if (!impd1->base) {
366 ret = -ENOMEM;
367 goto free_impd1;
368 }
369
370 lm_set_drvdata(dev, impd1);
371
372 printk("IM-PD1 found at 0x%08lx\n",
373 (unsigned long)dev->resource.start);
374
375 for (i = 0; i < ARRAY_SIZE(impd1->vcos); i++) {
376 impd1->vcos[i].owner = THIS_MODULE,
377 impd1->vcos[i].params = &impd1_vco_params,
378 impd1->vcos[i].data = impd1,
379 impd1->vcos[i].setvco = impd1_setvco;
380 }
381
382 impd1->clks[0] = clkdev_alloc(&impd1->vcos[0], NULL, "lm%x:01000",
383 dev->id);
384 impd1->clks[1] = clkdev_alloc(&fixed_14745600, NULL, "lm%x:00100",
385 dev->id);
386 impd1->clks[2] = clkdev_alloc(&fixed_14745600, NULL, "lm%x:00200",
387 dev->id);
388 for (i = 0; i < ARRAY_SIZE(impd1->clks); i++)
389 clkdev_add(impd1->clks[i]);
390
391 for (i = 0; i < ARRAY_SIZE(impd1_devs); i++) {
392 struct impd1_device *idev = impd1_devs + i;
393 struct amba_device *d;
394 unsigned long pc_base;
395
396 pc_base = dev->resource.start + idev->offset;
397
398 d = kzalloc(sizeof(struct amba_device), GFP_KERNEL);
399 if (!d)
400 continue;
401
402 dev_set_name(&d->dev, "lm%x:%5.5lx", dev->id, idev->offset >> 12);
403 d->dev.parent = &dev->dev;
404 d->res.start = dev->resource.start + idev->offset;
405 d->res.end = d->res.start + SZ_4K - 1;
406 d->res.flags = IORESOURCE_MEM;
407 d->irq[0] = dev->irq;
408 d->irq[1] = dev->irq;
409 d->periphid = idev->id;
410 d->dev.platform_data = idev->platform_data;
411
412 ret = amba_device_register(d, &dev->resource);
413 if (ret) {
414 dev_err(&d->dev, "unable to register device: %d\n", ret);
415 kfree(d);
416 }
417 }
418
419 return 0;
420
421 free_impd1:
422 if (impd1 && impd1->base)
423 iounmap(impd1->base);
424 kfree(impd1);
425 release_lm:
426 release_mem_region(dev->resource.start, SZ_4K);
427 return ret;
428 }
429
430 static int impd1_remove_one(struct device *dev, void *data)
431 {
432 device_unregister(dev);
433 return 0;
434 }
435
436 static void impd1_remove(struct lm_device *dev)
437 {
438 struct impd1_module *impd1 = lm_get_drvdata(dev);
439 int i;
440
441 device_for_each_child(&dev->dev, NULL, impd1_remove_one);
442
443 for (i = 0; i < ARRAY_SIZE(impd1->clks); i++)
444 clkdev_drop(impd1->clks[i]);
445
446 lm_set_drvdata(dev, NULL);
447
448 iounmap(impd1->base);
449 kfree(impd1);
450 release_mem_region(dev->resource.start, SZ_4K);
451 }
452
453 static struct lm_driver impd1_driver = {
454 .drv = {
455 .name = "impd1",
456 },
457 .probe = impd1_probe,
458 .remove = impd1_remove,
459 };
460
461 static int __init impd1_init(void)
462 {
463 return lm_driver_register(&impd1_driver);
464 }
465
466 static void __exit impd1_exit(void)
467 {
468 lm_driver_unregister(&impd1_driver);
469 }
470
471 module_init(impd1_init);
472 module_exit(impd1_exit);
473
474 MODULE_LICENSE("GPL");
475 MODULE_DESCRIPTION("Integrator/IM-PD1 logic module core driver");
476 MODULE_AUTHOR("Deep Blue Solutions Ltd");
linux-next