sound/arm/pxa2xx-ac97-lib.c

   1 /*
   2  * Based on sound/arm/pxa2xx-ac97.c and sound/soc/pxa/pxa2xx-ac97.c
   3  * which contain:
   4  *
   5  * Author:      Nicolas Pitre
   6  * Created:     Dec 02, 2004
   7  * Copyright:   MontaVista Software Inc.
   8  *
   9  * This program is free software; you can redistribute it and/or modify
  10  * it under the terms of the GNU General Public License version 2 as
  11  * published by the Free Software Foundation.
  12  */
  13
  14 #include <linux/kernel.h>
  15 #include <linux/platform_device.h>
  16 #include <linux/interrupt.h>
  17 #include <linux/clk.h>
  18 #include <linux/delay.h>
  19
  20 #include <sound/ac97_codec.h>
  21 #include <sound/pxa2xx-lib.h>
  22
  23 #include <asm/irq.h>
  24 #include <mach/regs-ac97.h>
  25 #include <mach/pxa2xx-gpio.h>
  26 #include <mach/audio.h>
  27
  28 static DEFINE_MUTEX(car_mutex);
  29 static DECLARE_WAIT_QUEUE_HEAD(gsr_wq);
  30 static volatile long gsr_bits;
  31 static struct clk *ac97_clk;
  32 static struct clk *ac97conf_clk;
  33 static int reset_gpio;
  34
  35 /*
  36  * Beware PXA27x bugs:
  37  *
  38  *   o Slot 12 read from modem space will hang controller.
  39  *   o CDONE, SDONE interrupt fails after any slot 12 IO.
  40  *
  41  * We therefore have an hybrid approach for waiting on SDONE (interrupt or
  42  * 1 jiffy timeout if interrupt never comes).
  43  */
  44
  45 enum {
  46         RESETGPIO_FORCE_HIGH,
  47         RESETGPIO_FORCE_LOW,
  48         RESETGPIO_NORMAL_ALTFUNC
  49 };
  50
  51 /**
  52  * set_resetgpio_mode - computes and sets the AC97_RESET gpio mode on PXA
  53  * @mode: chosen action
  54  *
  55  * As the PXA27x CPUs suffer from a AC97 bug, a manual control of the reset line
  56  * must be done to insure proper work of AC97 reset line.  This function
  57  * computes the correct gpio_mode for further use by reset functions, and
  58  * applied the change through pxa_gpio_mode.
  59  */
  60 static void set_resetgpio_mode(int resetgpio_action)
  61 {
  62         int mode = 0;
  63
  64         if (reset_gpio)
  65                 switch (resetgpio_action) {
  66                 case RESETGPIO_NORMAL_ALTFUNC:
  67                         if (reset_gpio == 113)
  68                                 mode = 113 | GPIO_ALT_FN_2_OUT;
  69                         if (reset_gpio == 95)
  70                                 mode = 95 | GPIO_ALT_FN_1_OUT;
  71                         break;
  72                 case RESETGPIO_FORCE_LOW:
  73                         mode = reset_gpio | GPIO_OUT | GPIO_DFLT_LOW;
  74                         break;
  75                 case RESETGPIO_FORCE_HIGH:
  76                         mode = reset_gpio | GPIO_OUT | GPIO_DFLT_HIGH;
  77                         break;
  78                 };
  79
  80         if (mode)
  81                 pxa_gpio_mode(mode);
  82 }
  83
  84 unsigned short pxa2xx_ac97_read(struct snd_ac97 *ac97, unsigned short reg)
  85 {
  86         unsigned short val = -1;
  87         volatile u32 *reg_addr;
  88
  89         mutex_lock(&car_mutex);
  90
  91         /* set up primary or secondary codec space */
  92         if (cpu_is_pxa25x() && reg == AC97_GPIO_STATUS)
  93                 reg_addr = ac97->num ? &SMC_REG_BASE : &PMC_REG_BASE;
  94         else
  95                 reg_addr = ac97->num ? &SAC_REG_BASE : &PAC_REG_BASE;
  96         reg_addr += (reg >> 1);
  97
  98         /* start read access across the ac97 link */
  99         GSR = GSR_CDONE | GSR_SDONE;
 100         gsr_bits = 0;
 101         val = *reg_addr;
 102         if (reg == AC97_GPIO_STATUS)
 103                 goto out;
 104         if (wait_event_timeout(gsr_wq, (GSR | gsr_bits) & GSR_SDONE, 1) <= 0 &&
 105             !((GSR | gsr_bits) & GSR_SDONE)) {
 106                 printk(KERN_ERR "%s: read error (ac97_reg=%d GSR=%#lx)\n",
 107                                 __func__, reg, GSR | gsr_bits);
 108                 val = -1;
 109                 goto out;
 110         }
 111
 112         /* valid data now */
 113         GSR = GSR_CDONE | GSR_SDONE;
 114         gsr_bits = 0;
 115         val = *reg_addr;
 116         /* but we've just started another cycle... */
 117         wait_event_timeout(gsr_wq, (GSR | gsr_bits) & GSR_SDONE, 1);
 118
 119 out:    mutex_unlock(&car_mutex);
 120         return val;
 121 }
 122 EXPORT_SYMBOL_GPL(pxa2xx_ac97_read);
 123
 124 void pxa2xx_ac97_write(struct snd_ac97 *ac97, unsigned short reg,
 125                         unsigned short val)
 126 {
 127         volatile u32 *reg_addr;
 128
 129         mutex_lock(&car_mutex);
 130
 131         /* set up primary or secondary codec space */
 132         if (cpu_is_pxa25x() && reg == AC97_GPIO_STATUS)
 133                 reg_addr = ac97->num ? &SMC_REG_BASE : &PMC_REG_BASE;
 134         else
 135                 reg_addr = ac97->num ? &SAC_REG_BASE : &PAC_REG_BASE;
 136         reg_addr += (reg >> 1);
 137
 138         GSR = GSR_CDONE | GSR_SDONE;
 139         gsr_bits = 0;
 140         *reg_addr = val;
 141         if (wait_event_timeout(gsr_wq, (GSR | gsr_bits) & GSR_CDONE, 1) <= 0 &&
 142             !((GSR | gsr_bits) & GSR_CDONE))
 143                 printk(KERN_ERR "%s: write error (ac97_reg=%d GSR=%#lx)\n",
 144                                 __func__, reg, GSR | gsr_bits);
 145
 146         mutex_unlock(&car_mutex);
 147 }
 148 EXPORT_SYMBOL_GPL(pxa2xx_ac97_write);
 149
 150 #ifdef CONFIG_PXA25x
 151 static inline void pxa_ac97_warm_pxa25x(void)
 152 {
 153         gsr_bits = 0;
 154
 155         GCR |= GCR_WARM_RST | GCR_PRIRDY_IEN | GCR_SECRDY_IEN;
 156         wait_event_timeout(gsr_wq, gsr_bits & (GSR_PCR | GSR_SCR), 1);
 157 }
 158
 159 static inline void pxa_ac97_cold_pxa25x(void)
 160 {
 161         GCR &=  GCR_COLD_RST;  /* clear everything but nCRST */
 162         GCR &= ~GCR_COLD_RST;  /* then assert nCRST */
 163
 164         gsr_bits = 0;
 165
 166         GCR = GCR_COLD_RST;
 167         GCR |= GCR_CDONE_IE|GCR_SDONE_IE;
 168         wait_event_timeout(gsr_wq, gsr_bits & (GSR_PCR | GSR_SCR), 1);
 169 }
 170 #endif
 171
 172 #ifdef CONFIG_PXA27x
 173 static inline void pxa_ac97_warm_pxa27x(void)
 174 {
 175         gsr_bits = 0;
 176
 177         /* warm reset broken on Bulverde,
 178            so manually keep AC97 reset high */
 179         set_resetgpio_mode(RESETGPIO_FORCE_HIGH);
 180         udelay(10);
 181         GCR |= GCR_WARM_RST;
 182         set_resetgpio_mode(RESETGPIO_NORMAL_ALTFUNC);
 183         udelay(500);
 184 }
 185
 186 static inline void pxa_ac97_cold_pxa27x(void)
 187 {
 188         GCR &=  GCR_COLD_RST;  /* clear everything but nCRST */
 189         GCR &= ~GCR_COLD_RST;  /* then assert nCRST */
 190
 191         gsr_bits = 0;
 192
 193         /* PXA27x Developers Manual section 13.5.2.2.1 */
 194         clk_enable(ac97conf_clk);
 195         udelay(5);
 196         clk_disable(ac97conf_clk);
 197         GCR = GCR_COLD_RST;
 198         udelay(50);
 199 }
 200 #endif
 201
 202 #ifdef CONFIG_PXA3xx
 203 static inline void pxa_ac97_warm_pxa3xx(void)
 204 {
 205         int timeout = 100;
 206
 207         gsr_bits = 0;
 208
 209         /* Can't use interrupts */
 210         GCR |= GCR_WARM_RST;
 211         while (!((GSR | gsr_bits) & (GSR_PCR | GSR_SCR)) && timeout--)
 212                 mdelay(1);
 213 }
 214
 215 static inline void pxa_ac97_cold_pxa3xx(void)
 216 {
 217         int timeout = 1000;
 218
 219         /* Hold CLKBPB for 100us */
 220         GCR = 0;
 221         GCR = GCR_CLKBPB;
 222         udelay(100);
 223         GCR = 0;
 224
 225         GCR &=  GCR_COLD_RST;  /* clear everything but nCRST */
 226         GCR &= ~GCR_COLD_RST;  /* then assert nCRST */
 227
 228         gsr_bits = 0;
 229
 230         /* Can't use interrupts on PXA3xx */
 231         GCR &= ~(GCR_PRIRDY_IEN|GCR_SECRDY_IEN);
 232
 233         GCR = GCR_WARM_RST | GCR_COLD_RST;
 234         while (!(GSR & (GSR_PCR | GSR_SCR)) && timeout--)
 235                 mdelay(10);
 236 }
 237 #endif
 238
 239 bool pxa2xx_ac97_try_warm_reset(struct snd_ac97 *ac97)
 240 {
 241         unsigned long gsr;
 242
 243 #ifdef CONFIG_PXA25x
 244         if (cpu_is_pxa25x())
 245                 pxa_ac97_warm_pxa25x();
 246         else
 247 #endif
 248 #ifdef CONFIG_PXA27x
 249         if (cpu_is_pxa27x())
 250                 pxa_ac97_warm_pxa27x();
 251         else
 252 #endif
 253 #ifdef CONFIG_PXA3xx
 254         if (cpu_is_pxa3xx())
 255                 pxa_ac97_warm_pxa3xx();
 256         else
 257 #endif
 258                 BUG();
 259         gsr = GSR | gsr_bits;
 260         if (!(gsr & (GSR_PCR | GSR_SCR))) {
 261                 printk(KERN_INFO "%s: warm reset timeout (GSR=%#lx)\n",
 262                                  __func__, gsr);
 263
 264                 return false;
 265         }
 266
 267         return true;
 268 }
 269 EXPORT_SYMBOL_GPL(pxa2xx_ac97_try_warm_reset);
 270
 271 bool pxa2xx_ac97_try_cold_reset(struct snd_ac97 *ac97)
 272 {
 273         unsigned long gsr;
 274
 275 #ifdef CONFIG_PXA25x
 276         if (cpu_is_pxa25x())
 277                 pxa_ac97_cold_pxa25x();
 278         else
 279 #endif
 280 #ifdef CONFIG_PXA27x
 281         if (cpu_is_pxa27x())
 282                 pxa_ac97_cold_pxa27x();
 283         else
 284 #endif
 285 #ifdef CONFIG_PXA3xx
 286         if (cpu_is_pxa3xx())
 287                 pxa_ac97_cold_pxa3xx();
 288         else
 289 #endif
 290                 BUG();
 291
 292         gsr = GSR | gsr_bits;
 293         if (!(gsr & (GSR_PCR | GSR_SCR))) {
 294                 printk(KERN_INFO "%s: cold reset timeout (GSR=%#lx)\n",
 295                                  __func__, gsr);
 296
 297                 return false;
 298         }
 299
 300         return true;
 301 }
 302 EXPORT_SYMBOL_GPL(pxa2xx_ac97_try_cold_reset);
 303
 304
 305 void pxa2xx_ac97_finish_reset(struct snd_ac97 *ac97)
 306 {
 307         GCR &= ~(GCR_PRIRDY_IEN|GCR_SECRDY_IEN);
 308         GCR |= GCR_SDONE_IE|GCR_CDONE_IE;
 309 }
 310 EXPORT_SYMBOL_GPL(pxa2xx_ac97_finish_reset);
 311
 312 static irqreturn_t pxa2xx_ac97_irq(int irq, void *dev_id)
 313 {
 314         long status;
 315
 316         status = GSR;
 317         if (status) {
 318                 GSR = status;
 319                 gsr_bits |= status;
 320                 wake_up(&gsr_wq);
 321
 322                 /* Although we don't use those we still need to clear them
 323                    since they tend to spuriously trigger when MMC is used
 324                    (hardware bug? go figure)... */
 325                 if (cpu_is_pxa27x()) {
 326                         MISR = MISR_EOC;
 327                         PISR = PISR_EOC;
 328                         MCSR = MCSR_EOC;
 329                 }
 330
 331                 return IRQ_HANDLED;
 332         }
 333
 334         return IRQ_NONE;
 335 }
 336
 337 #ifdef CONFIG_PM
 338 int pxa2xx_ac97_hw_suspend(void)
 339 {
 340         GCR |= GCR_ACLINK_OFF;
 341         clk_disable(ac97_clk);
 342         return 0;
 343 }
 344 EXPORT_SYMBOL_GPL(pxa2xx_ac97_hw_suspend);
 345
 346 int pxa2xx_ac97_hw_resume(void)
 347 {
 348         if (cpu_is_pxa25x() || cpu_is_pxa27x()) {
 349                 pxa_gpio_mode(GPIO31_SYNC_AC97_MD);
 350                 pxa_gpio_mode(GPIO30_SDATA_OUT_AC97_MD);
 351                 pxa_gpio_mode(GPIO28_BITCLK_AC97_MD);
 352                 pxa_gpio_mode(GPIO29_SDATA_IN_AC97_MD);
 353         }
 354         if (cpu_is_pxa27x()) {
 355                 /* Use GPIO 113 or 95 as AC97 Reset on Bulverde */
 356                 set_resetgpio_mode(RESETGPIO_NORMAL_ALTFUNC);
 357         }
 358         clk_enable(ac97_clk);
 359         return 0;
 360 }
 361 EXPORT_SYMBOL_GPL(pxa2xx_ac97_hw_resume);
 362 #endif
 363
 364 int __devinit pxa2xx_ac97_hw_probe(struct platform_device *dev)
 365 {
 366         int ret;
 367         pxa2xx_audio_ops_t *pdata = dev->dev.platform_data;
 368
 369         if (pdata) {
 370                 switch (pdata->reset_gpio) {
 371                 case 95:
 372                 case 113:
 373                         reset_gpio = pdata->reset_gpio;
 374                         break;
 375                 case 0:
 376                         reset_gpio = 113;
 377                         break;
 378                 case -1:
 379                         break;
 380                 default:
 381                         dev_err(&dev->dev, "Invalid reset GPIO %d\n",
 382                                 pdata->reset_gpio);
 383                 }
 384         } else {
 385                 if (cpu_is_pxa27x())
 386                         reset_gpio = 113;
 387         }
 388
 389         if (cpu_is_pxa25x() || cpu_is_pxa27x()) {
 390                 pxa_gpio_mode(GPIO31_SYNC_AC97_MD);
 391                 pxa_gpio_mode(GPIO30_SDATA_OUT_AC97_MD);
 392                 pxa_gpio_mode(GPIO28_BITCLK_AC97_MD);
 393                 pxa_gpio_mode(GPIO29_SDATA_IN_AC97_MD);
 394         }
 395
 396         if (cpu_is_pxa27x()) {
 397                 /* Use GPIO 113 as AC97 Reset on Bulverde */
 398                 set_resetgpio_mode(RESETGPIO_NORMAL_ALTFUNC);
 399                 ac97conf_clk = clk_get(&dev->dev, "AC97CONFCLK");
 400                 if (IS_ERR(ac97conf_clk)) {
 401                         ret = PTR_ERR(ac97conf_clk);
 402                         ac97conf_clk = NULL;
 403                         goto err_conf;
 404                 }
 405         }
 406
 407         ac97_clk = clk_get(&dev->dev, "AC97CLK");
 408         if (IS_ERR(ac97_clk)) {
 409                 ret = PTR_ERR(ac97_clk);
 410                 ac97_clk = NULL;
 411                 goto err_clk;
 412         }
 413
 414         ret = clk_enable(ac97_clk);
 415         if (ret)
 416                 goto err_clk2;
 417
 418         ret = request_irq(IRQ_AC97, pxa2xx_ac97_irq, IRQF_DISABLED, "AC97", NULL);
 419         if (ret < 0)
 420                 goto err_irq;
 421
 422         return 0;
 423
 424 err_irq:
 425         GCR |= GCR_ACLINK_OFF;
 426 err_clk2:
 427         clk_put(ac97_clk);
 428         ac97_clk = NULL;
 429 err_clk:
 430         if (ac97conf_clk) {
 431                 clk_put(ac97conf_clk);
 432                 ac97conf_clk = NULL;
 433         }
 434 err_conf:
 435         return ret;
 436 }
 437 EXPORT_SYMBOL_GPL(pxa2xx_ac97_hw_probe);
 438
 439 void pxa2xx_ac97_hw_remove(struct platform_device *dev)
 440 {
 441         GCR |= GCR_ACLINK_OFF;
 442         free_irq(IRQ_AC97, NULL);
 443         if (ac97conf_clk) {
 444                 clk_put(ac97conf_clk);
 445                 ac97conf_clk = NULL;
 446         }
 447         clk_disable(ac97_clk);
 448         clk_put(ac97_clk);
 449         ac97_clk = NULL;
 450 }
 451 EXPORT_SYMBOL_GPL(pxa2xx_ac97_hw_remove);
 452
 453 MODULE_AUTHOR("Nicolas Pitre");
 454 MODULE_DESCRIPTION("Intel/Marvell PXA sound library");
 455 MODULE_LICENSE("GPL");
 456