Merge remote-tracking branch 's5p/for-next'
[linux-2.6/next.git] / arch / mips / sibyte / bcm1480 / irq.c
blob09740d60e18722c9e5de6d565a62aa1dfded4ce3
1 /*
2 * Copyright (C) 2000,2001,2002,2003,2004 Broadcom Corporation
4 * This program is free software; you can redistribute it and/or
5 * modify it under the terms of the GNU General Public License
6 * as published by the Free Software Foundation; either version 2
7 * of the License, or (at your option) any later version.
9 * This program is distributed in the hope that it will be useful,
10 * but WITHOUT ANY WARRANTY; without even the implied warranty of
11 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
12 * GNU General Public License for more details.
14 * You should have received a copy of the GNU General Public License
15 * along with this program; if not, write to the Free Software
16 * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
18 #include <linux/kernel.h>
19 #include <linux/init.h>
20 #include <linux/linkage.h>
21 #include <linux/interrupt.h>
22 #include <linux/smp.h>
23 #include <linux/spinlock.h>
24 #include <linux/mm.h>
25 #include <linux/kernel_stat.h>
27 #include <asm/errno.h>
28 #include <asm/irq_regs.h>
29 #include <asm/signal.h>
30 #include <asm/system.h>
31 #include <asm/io.h>
33 #include <asm/sibyte/bcm1480_regs.h>
34 #include <asm/sibyte/bcm1480_int.h>
35 #include <asm/sibyte/bcm1480_scd.h>
37 #include <asm/sibyte/sb1250_uart.h>
38 #include <asm/sibyte/sb1250.h>
41 * These are the routines that handle all the low level interrupt stuff.
42 * Actions handled here are: initialization of the interrupt map, requesting of
43 * interrupt lines by handlers, dispatching if interrupts to handlers, probing
44 * for interrupt lines
47 #ifdef CONFIG_PCI
48 extern unsigned long ht_eoi_space;
49 #endif
51 /* Store the CPU id (not the logical number) */
52 int bcm1480_irq_owner[BCM1480_NR_IRQS];
54 static DEFINE_RAW_SPINLOCK(bcm1480_imr_lock);
56 void bcm1480_mask_irq(int cpu, int irq)
58 unsigned long flags, hl_spacing;
59 u64 cur_ints;
61 raw_spin_lock_irqsave(&bcm1480_imr_lock, flags);
62 hl_spacing = 0;
63 if ((irq >= BCM1480_NR_IRQS_HALF) && (irq <= BCM1480_NR_IRQS)) {
64 hl_spacing = BCM1480_IMR_HL_SPACING;
65 irq -= BCM1480_NR_IRQS_HALF;
67 cur_ints = ____raw_readq(IOADDR(A_BCM1480_IMR_MAPPER(cpu) + R_BCM1480_IMR_INTERRUPT_MASK_H + hl_spacing));
68 cur_ints |= (((u64) 1) << irq);
69 ____raw_writeq(cur_ints, IOADDR(A_BCM1480_IMR_MAPPER(cpu) + R_BCM1480_IMR_INTERRUPT_MASK_H + hl_spacing));
70 raw_spin_unlock_irqrestore(&bcm1480_imr_lock, flags);
73 void bcm1480_unmask_irq(int cpu, int irq)
75 unsigned long flags, hl_spacing;
76 u64 cur_ints;
78 raw_spin_lock_irqsave(&bcm1480_imr_lock, flags);
79 hl_spacing = 0;
80 if ((irq >= BCM1480_NR_IRQS_HALF) && (irq <= BCM1480_NR_IRQS)) {
81 hl_spacing = BCM1480_IMR_HL_SPACING;
82 irq -= BCM1480_NR_IRQS_HALF;
84 cur_ints = ____raw_readq(IOADDR(A_BCM1480_IMR_MAPPER(cpu) + R_BCM1480_IMR_INTERRUPT_MASK_H + hl_spacing));
85 cur_ints &= ~(((u64) 1) << irq);
86 ____raw_writeq(cur_ints, IOADDR(A_BCM1480_IMR_MAPPER(cpu) + R_BCM1480_IMR_INTERRUPT_MASK_H + hl_spacing));
87 raw_spin_unlock_irqrestore(&bcm1480_imr_lock, flags);
90 #ifdef CONFIG_SMP
91 static int bcm1480_set_affinity(struct irq_data *d, const struct cpumask *mask,
92 bool force)
94 unsigned int irq_dirty, irq = d->irq;
95 int i = 0, old_cpu, cpu, int_on, k;
96 u64 cur_ints;
97 unsigned long flags;
99 i = cpumask_first(mask);
101 /* Convert logical CPU to physical CPU */
102 cpu = cpu_logical_map(i);
104 /* Protect against other affinity changers and IMR manipulation */
105 raw_spin_lock_irqsave(&bcm1480_imr_lock, flags);
107 /* Swizzle each CPU's IMR (but leave the IP selection alone) */
108 old_cpu = bcm1480_irq_owner[irq];
109 irq_dirty = irq;
110 if ((irq_dirty >= BCM1480_NR_IRQS_HALF) && (irq_dirty <= BCM1480_NR_IRQS)) {
111 irq_dirty -= BCM1480_NR_IRQS_HALF;
114 for (k=0; k<2; k++) { /* Loop through high and low interrupt mask register */
115 cur_ints = ____raw_readq(IOADDR(A_BCM1480_IMR_MAPPER(old_cpu) + R_BCM1480_IMR_INTERRUPT_MASK_H + (k*BCM1480_IMR_HL_SPACING)));
116 int_on = !(cur_ints & (((u64) 1) << irq_dirty));
117 if (int_on) {
118 /* If it was on, mask it */
119 cur_ints |= (((u64) 1) << irq_dirty);
120 ____raw_writeq(cur_ints, IOADDR(A_BCM1480_IMR_MAPPER(old_cpu) + R_BCM1480_IMR_INTERRUPT_MASK_H + (k*BCM1480_IMR_HL_SPACING)));
122 bcm1480_irq_owner[irq] = cpu;
123 if (int_on) {
124 /* unmask for the new CPU */
125 cur_ints = ____raw_readq(IOADDR(A_BCM1480_IMR_MAPPER(cpu) + R_BCM1480_IMR_INTERRUPT_MASK_H + (k*BCM1480_IMR_HL_SPACING)));
126 cur_ints &= ~(((u64) 1) << irq_dirty);
127 ____raw_writeq(cur_ints, IOADDR(A_BCM1480_IMR_MAPPER(cpu) + R_BCM1480_IMR_INTERRUPT_MASK_H + (k*BCM1480_IMR_HL_SPACING)));
130 raw_spin_unlock_irqrestore(&bcm1480_imr_lock, flags);
132 return 0;
134 #endif
137 /*****************************************************************************/
139 static void disable_bcm1480_irq(struct irq_data *d)
141 unsigned int irq = d->irq;
143 bcm1480_mask_irq(bcm1480_irq_owner[irq], irq);
146 static void enable_bcm1480_irq(struct irq_data *d)
148 unsigned int irq = d->irq;
150 bcm1480_unmask_irq(bcm1480_irq_owner[irq], irq);
154 static void ack_bcm1480_irq(struct irq_data *d)
156 unsigned int irq_dirty, irq = d->irq;
157 u64 pending;
158 int k;
161 * If the interrupt was an HT interrupt, now is the time to
162 * clear it. NOTE: we assume the HT bridge was set up to
163 * deliver the interrupts to all CPUs (which makes affinity
164 * changing easier for us)
166 irq_dirty = irq;
167 if ((irq_dirty >= BCM1480_NR_IRQS_HALF) && (irq_dirty <= BCM1480_NR_IRQS)) {
168 irq_dirty -= BCM1480_NR_IRQS_HALF;
170 for (k=0; k<2; k++) { /* Loop through high and low LDT interrupts */
171 pending = __raw_readq(IOADDR(A_BCM1480_IMR_REGISTER(bcm1480_irq_owner[irq],
172 R_BCM1480_IMR_LDT_INTERRUPT_H + (k*BCM1480_IMR_HL_SPACING))));
173 pending &= ((u64)1 << (irq_dirty));
174 if (pending) {
175 #ifdef CONFIG_SMP
176 int i;
177 for (i=0; i<NR_CPUS; i++) {
179 * Clear for all CPUs so an affinity switch
180 * doesn't find an old status
182 __raw_writeq(pending, IOADDR(A_BCM1480_IMR_REGISTER(cpu_logical_map(i),
183 R_BCM1480_IMR_LDT_INTERRUPT_CLR_H + (k*BCM1480_IMR_HL_SPACING))));
185 #else
186 __raw_writeq(pending, IOADDR(A_BCM1480_IMR_REGISTER(0, R_BCM1480_IMR_LDT_INTERRUPT_CLR_H + (k*BCM1480_IMR_HL_SPACING))));
187 #endif
190 * Generate EOI. For Pass 1 parts, EOI is a nop. For
191 * Pass 2, the LDT world may be edge-triggered, but
192 * this EOI shouldn't hurt. If they are
193 * level-sensitive, the EOI is required.
195 #ifdef CONFIG_PCI
196 if (ht_eoi_space)
197 *(uint32_t *)(ht_eoi_space+(irq<<16)+(7<<2)) = 0;
198 #endif
201 bcm1480_mask_irq(bcm1480_irq_owner[irq], irq);
204 static struct irq_chip bcm1480_irq_type = {
205 .name = "BCM1480-IMR",
206 .irq_mask_ack = ack_bcm1480_irq,
207 .irq_mask = disable_bcm1480_irq,
208 .irq_unmask = enable_bcm1480_irq,
209 #ifdef CONFIG_SMP
210 .irq_set_affinity = bcm1480_set_affinity
211 #endif
214 void __init init_bcm1480_irqs(void)
216 int i;
218 for (i = 0; i < BCM1480_NR_IRQS; i++) {
219 irq_set_chip_and_handler(i, &bcm1480_irq_type,
220 handle_level_irq);
221 bcm1480_irq_owner[i] = 0;
226 * init_IRQ is called early in the boot sequence from init/main.c. It
227 * is responsible for setting up the interrupt mapper and installing the
228 * handler that will be responsible for dispatching interrupts to the
229 * "right" place.
232 * For now, map all interrupts to IP[2]. We could save
233 * some cycles by parceling out system interrupts to different
234 * IP lines, but keep it simple for bringup. We'll also direct
235 * all interrupts to a single CPU; we should probably route
236 * PCI and LDT to one cpu and everything else to the other
237 * to balance the load a bit.
239 * On the second cpu, everything is set to IP5, which is
240 * ignored, EXCEPT the mailbox interrupt. That one is
241 * set to IP[2] so it is handled. This is needed so we
242 * can do cross-cpu function calls, as required by SMP
245 #define IMR_IP2_VAL K_BCM1480_INT_MAP_I0
246 #define IMR_IP3_VAL K_BCM1480_INT_MAP_I1
247 #define IMR_IP4_VAL K_BCM1480_INT_MAP_I2
248 #define IMR_IP5_VAL K_BCM1480_INT_MAP_I3
249 #define IMR_IP6_VAL K_BCM1480_INT_MAP_I4
251 void __init arch_init_irq(void)
253 unsigned int i, cpu;
254 u64 tmp;
255 unsigned int imask = STATUSF_IP4 | STATUSF_IP3 | STATUSF_IP2 |
256 STATUSF_IP1 | STATUSF_IP0;
258 /* Default everything to IP2 */
259 /* Start with _high registers which has no bit 0 interrupt source */
260 for (i = 1; i < BCM1480_NR_IRQS_HALF; i++) { /* was I0 */
261 for (cpu = 0; cpu < 4; cpu++) {
262 __raw_writeq(IMR_IP2_VAL,
263 IOADDR(A_BCM1480_IMR_REGISTER(cpu,
264 R_BCM1480_IMR_INTERRUPT_MAP_BASE_H) + (i << 3)));
268 /* Now do _low registers */
269 for (i = 0; i < BCM1480_NR_IRQS_HALF; i++) {
270 for (cpu = 0; cpu < 4; cpu++) {
271 __raw_writeq(IMR_IP2_VAL,
272 IOADDR(A_BCM1480_IMR_REGISTER(cpu,
273 R_BCM1480_IMR_INTERRUPT_MAP_BASE_L) + (i << 3)));
277 init_bcm1480_irqs();
280 * Map the high 16 bits of mailbox_0 registers to IP[3], for
281 * inter-cpu messages
283 /* Was I1 */
284 for (cpu = 0; cpu < 4; cpu++) {
285 __raw_writeq(IMR_IP3_VAL, IOADDR(A_BCM1480_IMR_REGISTER(cpu, R_BCM1480_IMR_INTERRUPT_MAP_BASE_H) +
286 (K_BCM1480_INT_MBOX_0_0 << 3)));
290 /* Clear the mailboxes. The firmware may leave them dirty */
291 for (cpu = 0; cpu < 4; cpu++) {
292 __raw_writeq(0xffffffffffffffffULL,
293 IOADDR(A_BCM1480_IMR_REGISTER(cpu, R_BCM1480_IMR_MAILBOX_0_CLR_CPU)));
294 __raw_writeq(0xffffffffffffffffULL,
295 IOADDR(A_BCM1480_IMR_REGISTER(cpu, R_BCM1480_IMR_MAILBOX_1_CLR_CPU)));
299 /* Mask everything except the high 16 bit of mailbox_0 registers for all cpus */
300 tmp = ~((u64) 0) ^ ( (((u64) 1) << K_BCM1480_INT_MBOX_0_0));
301 for (cpu = 0; cpu < 4; cpu++) {
302 __raw_writeq(tmp, IOADDR(A_BCM1480_IMR_REGISTER(cpu, R_BCM1480_IMR_INTERRUPT_MASK_H)));
304 tmp = ~((u64) 0);
305 for (cpu = 0; cpu < 4; cpu++) {
306 __raw_writeq(tmp, IOADDR(A_BCM1480_IMR_REGISTER(cpu, R_BCM1480_IMR_INTERRUPT_MASK_L)));
310 * Note that the timer interrupts are also mapped, but this is
311 * done in bcm1480_time_init(). Also, the profiling driver
312 * does its own management of IP7.
315 /* Enable necessary IPs, disable the rest */
316 change_c0_status(ST0_IM, imask);
319 extern void bcm1480_mailbox_interrupt(void);
321 static inline void dispatch_ip2(void)
323 unsigned long long mask_h, mask_l;
324 unsigned int cpu = smp_processor_id();
325 unsigned long base;
328 * Default...we've hit an IP[2] interrupt, which means we've got to
329 * check the 1480 interrupt registers to figure out what to do. Need
330 * to detect which CPU we're on, now that smp_affinity is supported.
332 base = A_BCM1480_IMR_MAPPER(cpu);
333 mask_h = __raw_readq(
334 IOADDR(base + R_BCM1480_IMR_INTERRUPT_STATUS_BASE_H));
335 mask_l = __raw_readq(
336 IOADDR(base + R_BCM1480_IMR_INTERRUPT_STATUS_BASE_L));
338 if (mask_h) {
339 if (mask_h ^ 1)
340 do_IRQ(fls64(mask_h) - 1);
341 else if (mask_l)
342 do_IRQ(63 + fls64(mask_l));
346 asmlinkage void plat_irq_dispatch(void)
348 unsigned int cpu = smp_processor_id();
349 unsigned int pending;
351 #ifdef CONFIG_SIBYTE_BCM1480_PROF
352 /* Set compare to count to silence count/compare timer interrupts */
353 write_c0_compare(read_c0_count());
354 #endif
356 pending = read_c0_cause() & read_c0_status();
358 #ifdef CONFIG_SIBYTE_BCM1480_PROF
359 if (pending & CAUSEF_IP7) /* Cpu performance counter interrupt */
360 sbprof_cpu_intr();
361 else
362 #endif
364 if (pending & CAUSEF_IP4)
365 do_IRQ(K_BCM1480_INT_TIMER_0 + cpu);
366 #ifdef CONFIG_SMP
367 else if (pending & CAUSEF_IP3)
368 bcm1480_mailbox_interrupt();
369 #endif
371 else if (pending & CAUSEF_IP2)
372 dispatch_ip2();