arch/mips/sibyte/sb1250/irq.c

   1 /*
   2  * Copyright (C) 2000, 2001, 2002, 2003 Broadcom Corporation
   3  *
   4  * This program is free software; you can redistribute it and/or
   5  * modify it under the terms of the GNU General Public License
   6  * as published by the Free Software Foundation; either version 2
   7  * of the License, or (at your option) any later version.
   8  *
   9  * This program is distributed in the hope that it will be useful,
  10  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  11  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  12  * GNU General Public License for more details.
  13  *
  14  * You should have received a copy of the GNU General Public License
  15  * along with this program; if not, write to the Free Software
  16  * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
  17  */
  18 #include <linux/kernel.h>
  19 #include <linux/init.h>
  20 #include <linux/linkage.h>
  21 #include <linux/interrupt.h>
  22 #include <linux/spinlock.h>
  23 #include <linux/smp.h>
  24 #include <linux/mm.h>
  25 #include <linux/kernel_stat.h>
  26
  27 #include <asm/errno.h>
  28 #include <asm/signal.h>
  29 #include <asm/system.h>
  30 #include <asm/time.h>
  31 #include <asm/io.h>
  32
  33 #include <asm/sibyte/sb1250_regs.h>
  34 #include <asm/sibyte/sb1250_int.h>
  35 #include <asm/sibyte/sb1250_uart.h>
  36 #include <asm/sibyte/sb1250_scd.h>
  37 #include <asm/sibyte/sb1250.h>
  38
  39 /*
  40  * These are the routines that handle all the low level interrupt stuff.
  41  * Actions handled here are: initialization of the interrupt map, requesting of
  42  * interrupt lines by handlers, dispatching if interrupts to handlers, probing
  43  * for interrupt lines
  44  */
  45
  46 #ifdef CONFIG_SIBYTE_HAS_LDT
  47 extern unsigned long ldt_eoi_space;
  48 #endif
  49
  50 /* Store the CPU id (not the logical number) */
  51 int sb1250_irq_owner[SB1250_NR_IRQS];
  52
  53 static DEFINE_RAW_SPINLOCK(sb1250_imr_lock);
  54
  55 void sb1250_mask_irq(int cpu, int irq)
  56 {
  57         unsigned long flags;
  58         u64 cur_ints;
  59
  60         raw_spin_lock_irqsave(&sb1250_imr_lock, flags);
  61         cur_ints = ____raw_readq(IOADDR(A_IMR_MAPPER(cpu) +
  62                                         R_IMR_INTERRUPT_MASK));
  63         cur_ints |= (((u64) 1) << irq);
  64         ____raw_writeq(cur_ints, IOADDR(A_IMR_MAPPER(cpu) +
  65                                         R_IMR_INTERRUPT_MASK));
  66         raw_spin_unlock_irqrestore(&sb1250_imr_lock, flags);
  67 }
  68
  69 void sb1250_unmask_irq(int cpu, int irq)
  70 {
  71         unsigned long flags;
  72         u64 cur_ints;
  73
  74         raw_spin_lock_irqsave(&sb1250_imr_lock, flags);
  75         cur_ints = ____raw_readq(IOADDR(A_IMR_MAPPER(cpu) +
  76                                         R_IMR_INTERRUPT_MASK));
  77         cur_ints &= ~(((u64) 1) << irq);
  78         ____raw_writeq(cur_ints, IOADDR(A_IMR_MAPPER(cpu) +
  79                                         R_IMR_INTERRUPT_MASK));
  80         raw_spin_unlock_irqrestore(&sb1250_imr_lock, flags);
  81 }
  82
  83 #ifdef CONFIG_SMP
  84 static int sb1250_set_affinity(struct irq_data *d, const struct cpumask *mask,
  85                                bool force)
  86 {
  87         int i = 0, old_cpu, cpu, int_on;
  88         unsigned int irq = d->irq;
  89         u64 cur_ints;
  90         unsigned long flags;
  91
  92         i = cpumask_first(mask);
  93
  94         /* Convert logical CPU to physical CPU */
  95         cpu = cpu_logical_map(i);
  96
  97         /* Protect against other affinity changers and IMR manipulation */
  98         raw_spin_lock_irqsave(&sb1250_imr_lock, flags);
  99
 100         /* Swizzle each CPU's IMR (but leave the IP selection alone) */
 101         old_cpu = sb1250_irq_owner[irq];
 102         cur_ints = ____raw_readq(IOADDR(A_IMR_MAPPER(old_cpu) +
 103                                         R_IMR_INTERRUPT_MASK));
 104         int_on = !(cur_ints & (((u64) 1) << irq));
 105         if (int_on) {
 106                 /* If it was on, mask it */
 107                 cur_ints |= (((u64) 1) << irq);
 108                 ____raw_writeq(cur_ints, IOADDR(A_IMR_MAPPER(old_cpu) +
 109                                         R_IMR_INTERRUPT_MASK));
 110         }
 111         sb1250_irq_owner[irq] = cpu;
 112         if (int_on) {
 113                 /* unmask for the new CPU */
 114                 cur_ints = ____raw_readq(IOADDR(A_IMR_MAPPER(cpu) +
 115                                         R_IMR_INTERRUPT_MASK));
 116                 cur_ints &= ~(((u64) 1) << irq);
 117                 ____raw_writeq(cur_ints, IOADDR(A_IMR_MAPPER(cpu) +
 118                                         R_IMR_INTERRUPT_MASK));
 119         }
 120         raw_spin_unlock_irqrestore(&sb1250_imr_lock, flags);
 121
 122         return 0;
 123 }
 124 #endif
 125
 126 static void disable_sb1250_irq(struct irq_data *d)
 127 {
 128         unsigned int irq = d->irq;
 129
 130         sb1250_mask_irq(sb1250_irq_owner[irq], irq);
 131 }
 132
 133 static void enable_sb1250_irq(struct irq_data *d)
 134 {
 135         unsigned int irq = d->irq;
 136
 137         sb1250_unmask_irq(sb1250_irq_owner[irq], irq);
 138 }
 139
 140
 141 static void ack_sb1250_irq(struct irq_data *d)
 142 {
 143         unsigned int irq = d->irq;
 144 #ifdef CONFIG_SIBYTE_HAS_LDT
 145         u64 pending;
 146
 147         /*
 148          * If the interrupt was an HT interrupt, now is the time to
 149          * clear it.  NOTE: we assume the HT bridge was set up to
 150          * deliver the interrupts to all CPUs (which makes affinity
 151          * changing easier for us)
 152          */
 153         pending = __raw_readq(IOADDR(A_IMR_REGISTER(sb1250_irq_owner[irq],
 154                                                     R_IMR_LDT_INTERRUPT)));
 155         pending &= ((u64)1 << (irq));
 156         if (pending) {
 157                 int i;
 158                 for (i=0; i<NR_CPUS; i++) {
 159                         int cpu;
 160 #ifdef CONFIG_SMP
 161                         cpu = cpu_logical_map(i);
 162 #else
 163                         cpu = i;
 164 #endif
 165                         /*
 166                          * Clear for all CPUs so an affinity switch
 167                          * doesn't find an old status
 168                          */
 169                         __raw_writeq(pending,
 170                                      IOADDR(A_IMR_REGISTER(cpu,
 171                                                 R_IMR_LDT_INTERRUPT_CLR)));
 172                 }
 173
 174                 /*
 175                  * Generate EOI.  For Pass 1 parts, EOI is a nop.  For
 176                  * Pass 2, the LDT world may be edge-triggered, but
 177                  * this EOI shouldn't hurt.  If they are
 178                  * level-sensitive, the EOI is required.
 179                  */
 180                 *(uint32_t *)(ldt_eoi_space+(irq<<16)+(7<<2)) = 0;
 181         }
 182 #endif
 183         sb1250_mask_irq(sb1250_irq_owner[irq], irq);
 184 }
 185
 186 static struct irq_chip sb1250_irq_type = {
 187         .name = "SB1250-IMR",
 188         .irq_mask_ack = ack_sb1250_irq,
 189         .irq_unmask = enable_sb1250_irq,
 190         .irq_mask = disable_sb1250_irq,
 191 #ifdef CONFIG_SMP
 192         .irq_set_affinity = sb1250_set_affinity
 193 #endif
 194 };
 195
 196 void __init init_sb1250_irqs(void)
 197 {
 198         int i;
 199
 200         for (i = 0; i < SB1250_NR_IRQS; i++) {
 201                 irq_set_chip_and_handler(i, &sb1250_irq_type,
 202                                          handle_level_irq);
 203                 sb1250_irq_owner[i] = 0;
 204         }
 205 }
 206
 207
 208 /*
 209  *  arch_init_irq is called early in the boot sequence from init/main.c via
 210  *  init_IRQ.  It is responsible for setting up the interrupt mapper and
 211  *  installing the handler that will be responsible for dispatching interrupts
 212  *  to the "right" place.
 213  */
 214 /*
 215  * For now, map all interrupts to IP[2].  We could save
 216  * some cycles by parceling out system interrupts to different
 217  * IP lines, but keep it simple for bringup.  We'll also direct
 218  * all interrupts to a single CPU; we should probably route
 219  * PCI and LDT to one cpu and everything else to the other
 220  * to balance the load a bit.
 221  *
 222  * On the second cpu, everything is set to IP5, which is
 223  * ignored, EXCEPT the mailbox interrupt.  That one is
 224  * set to IP[2] so it is handled.  This is needed so we
 225  * can do cross-cpu function calls, as required by SMP
 226  */
 227
 228 #define IMR_IP2_VAL     K_INT_MAP_I0
 229 #define IMR_IP3_VAL     K_INT_MAP_I1
 230 #define IMR_IP4_VAL     K_INT_MAP_I2
 231 #define IMR_IP5_VAL     K_INT_MAP_I3
 232 #define IMR_IP6_VAL     K_INT_MAP_I4
 233
 234 void __init arch_init_irq(void)
 235 {
 236
 237         unsigned int i;
 238         u64 tmp;
 239         unsigned int imask = STATUSF_IP4 | STATUSF_IP3 | STATUSF_IP2 |
 240                 STATUSF_IP1 | STATUSF_IP0;
 241
 242         /* Default everything to IP2 */
 243         for (i = 0; i < SB1250_NR_IRQS; i++) {  /* was I0 */
 244                 __raw_writeq(IMR_IP2_VAL,
 245                              IOADDR(A_IMR_REGISTER(0,
 246                                                    R_IMR_INTERRUPT_MAP_BASE) +
 247                                     (i << 3)));
 248                 __raw_writeq(IMR_IP2_VAL,
 249                              IOADDR(A_IMR_REGISTER(1,
 250                                                    R_IMR_INTERRUPT_MAP_BASE) +
 251                                     (i << 3)));
 252         }
 253
 254         init_sb1250_irqs();
 255
 256         /*
 257          * Map the high 16 bits of the mailbox registers to IP[3], for
 258          * inter-cpu messages
 259          */
 260         /* Was I1 */
 261         __raw_writeq(IMR_IP3_VAL,
 262                      IOADDR(A_IMR_REGISTER(0, R_IMR_INTERRUPT_MAP_BASE) +
 263                             (K_INT_MBOX_0 << 3)));
 264         __raw_writeq(IMR_IP3_VAL,
 265                      IOADDR(A_IMR_REGISTER(1, R_IMR_INTERRUPT_MAP_BASE) +
 266                             (K_INT_MBOX_0 << 3)));
 267
 268         /* Clear the mailboxes.  The firmware may leave them dirty */
 269         __raw_writeq(0xffffffffffffffffULL,
 270                      IOADDR(A_IMR_REGISTER(0, R_IMR_MAILBOX_CLR_CPU)));
 271         __raw_writeq(0xffffffffffffffffULL,
 272                      IOADDR(A_IMR_REGISTER(1, R_IMR_MAILBOX_CLR_CPU)));
 273
 274         /* Mask everything except the mailbox registers for both cpus */
 275         tmp = ~((u64) 0) ^ (((u64) 1) << K_INT_MBOX_0);
 276         __raw_writeq(tmp, IOADDR(A_IMR_REGISTER(0, R_IMR_INTERRUPT_MASK)));
 277         __raw_writeq(tmp, IOADDR(A_IMR_REGISTER(1, R_IMR_INTERRUPT_MASK)));
 278
 279         /*
 280          * Note that the timer interrupts are also mapped, but this is
 281          * done in sb1250_time_init().  Also, the profiling driver
 282          * does its own management of IP7.
 283          */
 284
 285         /* Enable necessary IPs, disable the rest */
 286         change_c0_status(ST0_IM, imask);
 287 }
 288
 289 extern void sb1250_mailbox_interrupt(void);
 290
 291 static inline void dispatch_ip2(void)
 292 {
 293         unsigned int cpu = smp_processor_id();
 294         unsigned long long mask;
 295
 296         /*
 297          * Default...we've hit an IP[2] interrupt, which means we've got to
 298          * check the 1250 interrupt registers to figure out what to do.  Need
 299          * to detect which CPU we're on, now that smp_affinity is supported.
 300          */
 301         mask = __raw_readq(IOADDR(A_IMR_REGISTER(cpu,
 302                                   R_IMR_INTERRUPT_STATUS_BASE)));
 303         if (mask)
 304                 do_IRQ(fls64(mask) - 1);
 305 }
 306
 307 asmlinkage void plat_irq_dispatch(void)
 308 {
 309         unsigned int cpu = smp_processor_id();
 310         unsigned int pending;
 311
 312         /*
 313          * What a pain. We have to be really careful saving the upper 32 bits
 314          * of any * register across function calls if we don't want them
 315          * trashed--since were running in -o32, the calling routing never saves
 316          * the full 64 bits of a register across a function call.  Being the
 317          * interrupt handler, we're guaranteed that interrupts are disabled
 318          * during this code so we don't have to worry about random interrupts
 319          * blasting the high 32 bits.
 320          */
 321
 322         pending = read_c0_cause() & read_c0_status() & ST0_IM;
 323
 324         if (pending & CAUSEF_IP7) /* CPU performance counter interrupt */
 325                 do_IRQ(MIPS_CPU_IRQ_BASE + 7);
 326         else if (pending & CAUSEF_IP4)
 327                 do_IRQ(K_INT_TIMER_0 + cpu);    /* sb1250_timer_interrupt() */
 328
 329 #ifdef CONFIG_SMP
 330         else if (pending & CAUSEF_IP3)
 331                 sb1250_mailbox_interrupt();
 332 #endif
 333
 334         else if (pending & CAUSEF_IP2)
 335                 dispatch_ip2();
 336         else
 337                 spurious_interrupt();
 338 }