arch/arm/mach-pxa/corgi_lcd.c

   1 /*
   2  * linux/arch/arm/mach-pxa/corgi_lcd.c
   3  *
   4  * Corgi/Spitz LCD Specific Code
   5  *
   6  * Copyright (C) 2005 Richard Purdie
   7  *
   8  * Connectivity:
   9  *   Corgi - LCD to ATI Imageon w100 (Wallaby)
  10  *   Spitz - LCD to PXA Framebuffer
  11  *
  12  * This program is free software; you can redistribute it and/or modify
  13  * it under the terms of the GNU General Public License version 2 as
  14  * published by the Free Software Foundation.
  15  *
  16  */
  17
  18 #include <linux/delay.h>
  19 #include <linux/kernel.h>
  20 #include <linux/platform_device.h>
  21 #include <linux/module.h>
  22 #include <linux/string.h>
  23 #include <mach/corgi.h>
  24 #include <mach/hardware.h>
  25 #include <mach/pxa-regs.h>
  26 #include <mach/sharpsl.h>
  27 #include <mach/spitz.h>
  28 #include <asm/hardware/scoop.h>
  29 #include <asm/mach/sharpsl_param.h>
  30 #include "generic.h"
  31
  32 /* Register Addresses */
  33 #define RESCTL_ADRS     0x00
  34 #define PHACTRL_ADRS    0x01
  35 #define DUTYCTRL_ADRS   0x02
  36 #define POWERREG0_ADRS  0x03
  37 #define POWERREG1_ADRS  0x04
  38 #define GPOR3_ADRS      0x05
  39 #define PICTRL_ADRS     0x06
  40 #define POLCTRL_ADRS    0x07
  41
  42 /* Register Bit Definitions */
  43 #define RESCTL_QVGA     0x01
  44 #define RESCTL_VGA      0x00
  45
  46 #define POWER1_VW_ON    0x01  /* VW Supply FET ON */
  47 #define POWER1_GVSS_ON  0x02  /* GVSS(-8V) Power Supply ON */
  48 #define POWER1_VDD_ON   0x04  /* VDD(8V),SVSS(-4V) Power Supply ON */
  49
  50 #define POWER1_VW_OFF   0x00  /* VW Supply FET OFF */
  51 #define POWER1_GVSS_OFF 0x00  /* GVSS(-8V) Power Supply OFF */
  52 #define POWER1_VDD_OFF  0x00  /* VDD(8V),SVSS(-4V) Power Supply OFF */
  53
  54 #define POWER0_COM_DCLK 0x01  /* COM Voltage DC Bias DAC Serial Data Clock */
  55 #define POWER0_COM_DOUT 0x02  /* COM Voltage DC Bias DAC Serial Data Out */
  56 #define POWER0_DAC_ON   0x04  /* DAC Power Supply ON */
  57 #define POWER0_COM_ON   0x08  /* COM Power Supply ON */
  58 #define POWER0_VCC5_ON  0x10  /* VCC5 Power Supply ON */
  59
  60 #define POWER0_DAC_OFF  0x00  /* DAC Power Supply OFF */
  61 #define POWER0_COM_OFF  0x00  /* COM Power Supply OFF */
  62 #define POWER0_VCC5_OFF 0x00  /* VCC5 Power Supply OFF */
  63
  64 #define PICTRL_INIT_STATE      0x01
  65 #define PICTRL_INIOFF          0x02
  66 #define PICTRL_POWER_DOWN      0x04
  67 #define PICTRL_COM_SIGNAL_OFF  0x08
  68 #define PICTRL_DAC_SIGNAL_OFF  0x10
  69
  70 #define POLCTRL_SYNC_POL_FALL  0x01
  71 #define POLCTRL_EN_POL_FALL    0x02
  72 #define POLCTRL_DATA_POL_FALL  0x04
  73 #define POLCTRL_SYNC_ACT_H     0x08
  74 #define POLCTRL_EN_ACT_L       0x10
  75
  76 #define POLCTRL_SYNC_POL_RISE  0x00
  77 #define POLCTRL_EN_POL_RISE    0x00
  78 #define POLCTRL_DATA_POL_RISE  0x00
  79 #define POLCTRL_SYNC_ACT_L     0x00
  80 #define POLCTRL_EN_ACT_H       0x00
  81
  82 #define PHACTRL_PHASE_MANUAL   0x01
  83 #define DEFAULT_PHAD_QVGA     (9)
  84 #define DEFAULT_COMADJ        (125)
  85
  86 /*
  87  * This is only a psuedo I2C interface. We can't use the standard kernel
  88  * routines as the interface is write only. We just assume the data is acked...
  89  */
  90 static void lcdtg_ssp_i2c_send(u8 data)
  91 {
  92         corgi_ssp_lcdtg_send(POWERREG0_ADRS, data);
  93         udelay(10);
  94 }
  95
  96 static void lcdtg_i2c_send_bit(u8 data)
  97 {
  98         lcdtg_ssp_i2c_send(data);
  99         lcdtg_ssp_i2c_send(data | POWER0_COM_DCLK);
 100         lcdtg_ssp_i2c_send(data);
 101 }
 102
 103 static void lcdtg_i2c_send_start(u8 base)
 104 {
 105         lcdtg_ssp_i2c_send(base | POWER0_COM_DCLK | POWER0_COM_DOUT);
 106         lcdtg_ssp_i2c_send(base | POWER0_COM_DCLK);
 107         lcdtg_ssp_i2c_send(base);
 108 }
 109
 110 static void lcdtg_i2c_send_stop(u8 base)
 111 {
 112         lcdtg_ssp_i2c_send(base);
 113         lcdtg_ssp_i2c_send(base | POWER0_COM_DCLK);
 114         lcdtg_ssp_i2c_send(base | POWER0_COM_DCLK | POWER0_COM_DOUT);
 115 }
 116
 117 static void lcdtg_i2c_send_byte(u8 base, u8 data)
 118 {
 119         int i;
 120         for (i = 0; i < 8; i++) {
 121                 if (data & 0x80)
 122                         lcdtg_i2c_send_bit(base | POWER0_COM_DOUT);
 123                 else
 124                         lcdtg_i2c_send_bit(base);
 125                 data <<= 1;
 126         }
 127 }
 128
 129 static void lcdtg_i2c_wait_ack(u8 base)
 130 {
 131         lcdtg_i2c_send_bit(base);
 132 }
 133
 134 static void lcdtg_set_common_voltage(u8 base_data, u8 data)
 135 {
 136         /* Set Common Voltage to M62332FP via I2C */
 137         lcdtg_i2c_send_start(base_data);
 138         lcdtg_i2c_send_byte(base_data, 0x9c);
 139         lcdtg_i2c_wait_ack(base_data);
 140         lcdtg_i2c_send_byte(base_data, 0x00);
 141         lcdtg_i2c_wait_ack(base_data);
 142         lcdtg_i2c_send_byte(base_data, data);
 143         lcdtg_i2c_wait_ack(base_data);
 144         lcdtg_i2c_send_stop(base_data);
 145 }
 146
 147 /* Set Phase Adjust */
 148 static void lcdtg_set_phadadj(int mode)
 149 {
 150         int adj;
 151         switch(mode) {
 152                 case 480:
 153                 case 640:
 154                         /* Setting for VGA */
 155                         adj = sharpsl_param.phadadj;
 156                         if (adj < 0) {
 157                                 adj = PHACTRL_PHASE_MANUAL;
 158                         } else {
 159                                 adj = ((adj & 0x0f) << 1) | PHACTRL_PHASE_MANUAL;
 160                         }
 161                         break;
 162                 case 240:
 163                 case 320:
 164                 default:
 165                         /* Setting for QVGA */
 166                         adj = (DEFAULT_PHAD_QVGA << 1) | PHACTRL_PHASE_MANUAL;
 167                         break;
 168         }
 169
 170         corgi_ssp_lcdtg_send(PHACTRL_ADRS, adj);
 171 }
 172
 173 static int lcd_inited;
 174
 175 void corgi_lcdtg_hw_init(int mode)
 176 {
 177         if (!lcd_inited) {
 178                 int comadj;
 179
 180                 /* Initialize Internal Logic & Port */
 181                 corgi_ssp_lcdtg_send(PICTRL_ADRS, PICTRL_POWER_DOWN | PICTRL_INIOFF | PICTRL_INIT_STATE
 182                                 | PICTRL_COM_SIGNAL_OFF | PICTRL_DAC_SIGNAL_OFF);
 183
 184                 corgi_ssp_lcdtg_send(POWERREG0_ADRS, POWER0_COM_DCLK | POWER0_COM_DOUT | POWER0_DAC_OFF
 185                                 | POWER0_COM_OFF | POWER0_VCC5_OFF);
 186
 187                 corgi_ssp_lcdtg_send(POWERREG1_ADRS, POWER1_VW_OFF | POWER1_GVSS_OFF | POWER1_VDD_OFF);
 188
 189                 /* VDD(+8V), SVSS(-4V) ON */
 190                 corgi_ssp_lcdtg_send(POWERREG1_ADRS, POWER1_VW_OFF | POWER1_GVSS_OFF | POWER1_VDD_ON);
 191                 mdelay(3);
 192
 193                 /* DAC ON */
 194                 corgi_ssp_lcdtg_send(POWERREG0_ADRS, POWER0_COM_DCLK | POWER0_COM_DOUT | POWER0_DAC_ON
 195                                 | POWER0_COM_OFF | POWER0_VCC5_OFF);
 196
 197                 /* INIB = H, INI = L  */
 198                 /* PICTL[0] = H , PICTL[1] = PICTL[2] = PICTL[4] = L */
 199                 corgi_ssp_lcdtg_send(PICTRL_ADRS, PICTRL_INIT_STATE | PICTRL_COM_SIGNAL_OFF);
 200
 201                 /* Set Common Voltage */
 202                 comadj = sharpsl_param.comadj;
 203                 if (comadj < 0)
 204                         comadj = DEFAULT_COMADJ;
 205                 lcdtg_set_common_voltage((POWER0_DAC_ON | POWER0_COM_OFF | POWER0_VCC5_OFF), comadj);
 206
 207                 /* VCC5 ON, DAC ON */
 208                 corgi_ssp_lcdtg_send(POWERREG0_ADRS, POWER0_COM_DCLK | POWER0_COM_DOUT | POWER0_DAC_ON |
 209                                 POWER0_COM_OFF | POWER0_VCC5_ON);
 210
 211                 /* GVSS(-8V) ON, VDD ON */
 212                 corgi_ssp_lcdtg_send(POWERREG1_ADRS, POWER1_VW_OFF | POWER1_GVSS_ON | POWER1_VDD_ON);
 213                 mdelay(2);
 214
 215                 /* COM SIGNAL ON (PICTL[3] = L) */
 216                 corgi_ssp_lcdtg_send(PICTRL_ADRS, PICTRL_INIT_STATE);
 217
 218                 /* COM ON, DAC ON, VCC5_ON */
 219                 corgi_ssp_lcdtg_send(POWERREG0_ADRS, POWER0_COM_DCLK | POWER0_COM_DOUT | POWER0_DAC_ON
 220                                 | POWER0_COM_ON | POWER0_VCC5_ON);
 221
 222                 /* VW ON, GVSS ON, VDD ON */
 223                 corgi_ssp_lcdtg_send(POWERREG1_ADRS, POWER1_VW_ON | POWER1_GVSS_ON | POWER1_VDD_ON);
 224
 225                 /* Signals output enable */
 226                 corgi_ssp_lcdtg_send(PICTRL_ADRS, 0);
 227
 228                 /* Set Phase Adjust */
 229                 lcdtg_set_phadadj(mode);
 230
 231                 /* Initialize for Input Signals from ATI */
 232                 corgi_ssp_lcdtg_send(POLCTRL_ADRS, POLCTRL_SYNC_POL_RISE | POLCTRL_EN_POL_RISE
 233                                 | POLCTRL_DATA_POL_RISE | POLCTRL_SYNC_ACT_L | POLCTRL_EN_ACT_H);
 234                 udelay(1000);
 235
 236                 lcd_inited=1;
 237         } else {
 238                 lcdtg_set_phadadj(mode);
 239         }
 240
 241         switch(mode) {
 242                 case 480:
 243                 case 640:
 244                         /* Set Lcd Resolution (VGA) */
 245                         corgi_ssp_lcdtg_send(RESCTL_ADRS, RESCTL_VGA);
 246                         break;
 247                 case 240:
 248                 case 320:
 249                 default:
 250                         /* Set Lcd Resolution (QVGA) */
 251                         corgi_ssp_lcdtg_send(RESCTL_ADRS, RESCTL_QVGA);
 252                         break;
 253         }
 254 }
 255
 256 void corgi_lcdtg_suspend(void)
 257 {
 258         /* 60Hz x 2 frame = 16.7msec x 2 = 33.4 msec */
 259         mdelay(34);
 260
 261         /* (1)VW OFF */
 262         corgi_ssp_lcdtg_send(POWERREG1_ADRS, POWER1_VW_OFF | POWER1_GVSS_ON | POWER1_VDD_ON);
 263
 264         /* (2)COM OFF */
 265         corgi_ssp_lcdtg_send(PICTRL_ADRS, PICTRL_COM_SIGNAL_OFF);
 266         corgi_ssp_lcdtg_send(POWERREG0_ADRS, POWER0_DAC_ON | POWER0_COM_OFF | POWER0_VCC5_ON);
 267
 268         /* (3)Set Common Voltage Bias 0V */
 269         lcdtg_set_common_voltage(POWER0_DAC_ON | POWER0_COM_OFF | POWER0_VCC5_ON, 0);
 270
 271         /* (4)GVSS OFF */
 272         corgi_ssp_lcdtg_send(POWERREG1_ADRS, POWER1_VW_OFF | POWER1_GVSS_OFF | POWER1_VDD_ON);
 273
 274         /* (5)VCC5 OFF */
 275         corgi_ssp_lcdtg_send(POWERREG0_ADRS, POWER0_DAC_ON | POWER0_COM_OFF | POWER0_VCC5_OFF);
 276
 277         /* (6)Set PDWN, INIOFF, DACOFF */
 278         corgi_ssp_lcdtg_send(PICTRL_ADRS, PICTRL_INIOFF | PICTRL_DAC_SIGNAL_OFF |
 279                         PICTRL_POWER_DOWN | PICTRL_COM_SIGNAL_OFF);
 280
 281         /* (7)DAC OFF */
 282         corgi_ssp_lcdtg_send(POWERREG0_ADRS, POWER0_DAC_OFF | POWER0_COM_OFF | POWER0_VCC5_OFF);
 283
 284         /* (8)VDD OFF */
 285         corgi_ssp_lcdtg_send(POWERREG1_ADRS, POWER1_VW_OFF | POWER1_GVSS_OFF | POWER1_VDD_OFF);
 286
 287         lcd_inited = 0;
 288 }
 289