Bias the placement of kernel pages at lower PFNs
[linux-2.6/openmoko-kernel/knife-kernel.git] / include / asm-v850 / sim85e2.h
blob17dd4fa318e65d4eb17ecbfb0f824b525f139eeb
1 /*
2 * include/asm-v850/sim85e2.h -- Machine-dependent defs for
3 * V850E2 RTL simulator
5 * Copyright (C) 2002,03 NEC Electronics Corporation
6 * Copyright (C) 2002,03 Miles Bader <miles@gnu.org>
8 * This file is subject to the terms and conditions of the GNU General
9 * Public License. See the file COPYING in the main directory of this
10 * archive for more details.
12 * Written by Miles Bader <miles@gnu.org>
15 #ifndef __V850_SIM85E2_H__
16 #define __V850_SIM85E2_H__
19 #include <asm/v850e2.h> /* Based on V850E2 core. */
22 /* Various memory areas supported by the simulator.
23 These should match the corresponding definitions in the linker script. */
25 /* `instruction RAM'; instruction fetches are much faster from IRAM than
26 from DRAM. */
27 #define IRAM_ADDR 0
28 #define IRAM_SIZE 0x00100000 /* 1MB */
29 /* `data RAM', below and contiguous with the I/O space.
30 Data fetches are much faster from DRAM than from IRAM. */
31 #define DRAM_ADDR 0xfff00000
32 #define DRAM_SIZE 0x000ff000 /* 1020KB */
33 /* `external ram'. Unlike the above RAM areas, this memory is cached,
34 so both instruction and data fetches should be (mostly) fast --
35 however, currently only write-through caching is supported, so writes
36 to ERAM will be slow. */
37 #define ERAM_ADDR 0x00100000
38 #define ERAM_SIZE 0x07f00000 /* 127MB (max) */
39 /* Dynamic RAM; uses memory controller. */
40 #define SDRAM_ADDR 0x10000000
41 #define SDRAM_SIZE 0x01000000 /* 16MB */
44 /* Simulator specific control registers. */
45 /* NOTHAL controls whether the simulator will stop at a `halt' insn. */
46 #define SIM85E2_NOTHAL_ADDR 0xffffff22
47 #define SIM85E2_NOTHAL (*(volatile u8 *)SIM85E2_NOTHAL_ADDR)
48 /* The simulator will stop N cycles after N is written to SIMFIN. */
49 #define SIM85E2_SIMFIN_ADDR 0xffffff24
50 #define SIM85E2_SIMFIN (*(volatile u16 *)SIM85E2_SIMFIN_ADDR)
53 /* For <asm/irq.h> */
54 #define NUM_CPU_IRQS 64
57 /* For <asm/page.h> */
58 #define PAGE_OFFSET SDRAM_ADDR
61 /* For <asm/entry.h> */
62 /* `R0 RAM', used for a few miscellaneous variables that must be accessible
63 using a load instruction relative to R0. The sim85e2 simulator
64 actually puts 1020K of RAM from FFF00000 to FFFFF000, so we arbitarily
65 choose a small portion at the end of that. */
66 #define R0_RAM_ADDR 0xFFFFE000
69 /* For <asm/param.h> */
70 #ifndef HZ
71 #define HZ 24 /* Minimum supported frequency. */
72 #endif
75 #endif /* __V850_SIM85E2_H__ */