[PATCH] PM: use kobject_name() to access kobject names
[linux-2.6/openmoko-kernel/knife-kernel.git] / include / asm-i386 / tlbflush.h
blob4dd82840d53bafd18d3538f0a1a52ec1d1f204a5
1 #ifndef _I386_TLBFLUSH_H
2 #define _I386_TLBFLUSH_H
4 #include <linux/mm.h>
5 #include <asm/processor.h>
7 #ifdef CONFIG_PARAVIRT
8 #include <asm/paravirt.h>
9 #else
10 #define __flush_tlb() __native_flush_tlb()
11 #define __flush_tlb_global() __native_flush_tlb_global()
12 #define __flush_tlb_single(addr) __native_flush_tlb_single(addr)
13 #endif
15 #define __native_flush_tlb() \
16 do { \
17 unsigned int tmpreg; \
19 __asm__ __volatile__( \
20 "movl %%cr3, %0; \n" \
21 "movl %0, %%cr3; # flush TLB \n" \
22 : "=r" (tmpreg) \
23 :: "memory"); \
24 } while (0)
27 * Global pages have to be flushed a bit differently. Not a real
28 * performance problem because this does not happen often.
30 #define __native_flush_tlb_global() \
31 do { \
32 unsigned int tmpreg, cr4, cr4_orig; \
34 __asm__ __volatile__( \
35 "movl %%cr4, %2; # turn off PGE \n" \
36 "movl %2, %1; \n" \
37 "andl %3, %1; \n" \
38 "movl %1, %%cr4; \n" \
39 "movl %%cr3, %0; \n" \
40 "movl %0, %%cr3; # flush TLB \n" \
41 "movl %2, %%cr4; # turn PGE back on \n" \
42 : "=&r" (tmpreg), "=&r" (cr4), "=&r" (cr4_orig) \
43 : "i" (~X86_CR4_PGE) \
44 : "memory"); \
45 } while (0)
47 #define __native_flush_tlb_single(addr) \
48 __asm__ __volatile__("invlpg (%0)" ::"r" (addr) : "memory")
50 # define __flush_tlb_all() \
51 do { \
52 if (cpu_has_pge) \
53 __flush_tlb_global(); \
54 else \
55 __flush_tlb(); \
56 } while (0)
58 #define cpu_has_invlpg (boot_cpu_data.x86 > 3)
60 #ifdef CONFIG_X86_INVLPG
61 # define __flush_tlb_one(addr) __flush_tlb_single(addr)
62 #else
63 # define __flush_tlb_one(addr) \
64 do { \
65 if (cpu_has_invlpg) \
66 __flush_tlb_single(addr); \
67 else \
68 __flush_tlb(); \
69 } while (0)
70 #endif
73 * TLB flushing:
75 * - flush_tlb() flushes the current mm struct TLBs
76 * - flush_tlb_all() flushes all processes TLBs
77 * - flush_tlb_mm(mm) flushes the specified mm context TLB's
78 * - flush_tlb_page(vma, vmaddr) flushes one page
79 * - flush_tlb_range(vma, start, end) flushes a range of pages
80 * - flush_tlb_kernel_range(start, end) flushes a range of kernel pages
81 * - flush_tlb_pgtables(mm, start, end) flushes a range of page tables
83 * ..but the i386 has somewhat limited tlb flushing capabilities,
84 * and page-granular flushes are available only on i486 and up.
87 #ifndef CONFIG_SMP
89 #define flush_tlb() __flush_tlb()
90 #define flush_tlb_all() __flush_tlb_all()
91 #define local_flush_tlb() __flush_tlb()
93 static inline void flush_tlb_mm(struct mm_struct *mm)
95 if (mm == current->active_mm)
96 __flush_tlb();
99 static inline void flush_tlb_page(struct vm_area_struct *vma,
100 unsigned long addr)
102 if (vma->vm_mm == current->active_mm)
103 __flush_tlb_one(addr);
106 static inline void flush_tlb_range(struct vm_area_struct *vma,
107 unsigned long start, unsigned long end)
109 if (vma->vm_mm == current->active_mm)
110 __flush_tlb();
113 #else
115 #include <asm/smp.h>
117 #define local_flush_tlb() \
118 __flush_tlb()
120 extern void flush_tlb_all(void);
121 extern void flush_tlb_current_task(void);
122 extern void flush_tlb_mm(struct mm_struct *);
123 extern void flush_tlb_page(struct vm_area_struct *, unsigned long);
125 #define flush_tlb() flush_tlb_current_task()
127 static inline void flush_tlb_range(struct vm_area_struct * vma, unsigned long start, unsigned long end)
129 flush_tlb_mm(vma->vm_mm);
132 #define TLBSTATE_OK 1
133 #define TLBSTATE_LAZY 2
135 struct tlb_state
137 struct mm_struct *active_mm;
138 int state;
139 char __cacheline_padding[L1_CACHE_BYTES-8];
141 DECLARE_PER_CPU(struct tlb_state, cpu_tlbstate);
144 #endif
146 #define flush_tlb_kernel_range(start, end) flush_tlb_all()
148 static inline void flush_tlb_pgtables(struct mm_struct *mm,
149 unsigned long start, unsigned long end)
151 /* i386 does not keep any page table caches in TLB */
154 #endif /* _I386_TLBFLUSH_H */