[PATCH] x86_64 early quirks: fix early_qrk[] section tag
[linux-2.6/openmoko-kernel/knife-kernel.git] / drivers / char / apm-emulation.c
blob179c7a3b6e750390d1fad74211d3b5e8d42fec1d
1 /*
2 * bios-less APM driver for ARM Linux
3 * Jamey Hicks <jamey@crl.dec.com>
4 * adapted from the APM BIOS driver for Linux by Stephen Rothwell (sfr@linuxcare.com)
6 * APM 1.2 Reference:
7 * Intel Corporation, Microsoft Corporation. Advanced Power Management
8 * (APM) BIOS Interface Specification, Revision 1.2, February 1996.
10 * [This document is available from Microsoft at:
11 * http://www.microsoft.com/hwdev/busbios/amp_12.htm]
13 #include <linux/module.h>
14 #include <linux/poll.h>
15 #include <linux/slab.h>
16 #include <linux/proc_fs.h>
17 #include <linux/miscdevice.h>
18 #include <linux/apm_bios.h>
19 #include <linux/capability.h>
20 #include <linux/sched.h>
21 #include <linux/pm.h>
22 #include <linux/apm-emulation.h>
23 #include <linux/device.h>
24 #include <linux/kernel.h>
25 #include <linux/list.h>
26 #include <linux/init.h>
27 #include <linux/completion.h>
28 #include <linux/kthread.h>
29 #include <linux/delay.h>
31 #include <asm/system.h>
34 * The apm_bios device is one of the misc char devices.
35 * This is its minor number.
37 #define APM_MINOR_DEV 134
40 * See Documentation/Config.help for the configuration options.
42 * Various options can be changed at boot time as follows:
43 * (We allow underscores for compatibility with the modules code)
44 * apm=on/off enable/disable APM
48 * Maximum number of events stored
50 #define APM_MAX_EVENTS 16
52 struct apm_queue {
53 unsigned int event_head;
54 unsigned int event_tail;
55 apm_event_t events[APM_MAX_EVENTS];
59 * The per-file APM data
61 struct apm_user {
62 struct list_head list;
64 unsigned int suser: 1;
65 unsigned int writer: 1;
66 unsigned int reader: 1;
68 int suspend_result;
69 unsigned int suspend_state;
70 #define SUSPEND_NONE 0 /* no suspend pending */
71 #define SUSPEND_PENDING 1 /* suspend pending read */
72 #define SUSPEND_READ 2 /* suspend read, pending ack */
73 #define SUSPEND_ACKED 3 /* suspend acked */
74 #define SUSPEND_WAIT 4 /* waiting for suspend */
75 #define SUSPEND_DONE 5 /* suspend completed */
77 struct apm_queue queue;
81 * Local variables
83 static int suspends_pending;
84 static int apm_disabled;
85 static struct task_struct *kapmd_tsk;
87 static DECLARE_WAIT_QUEUE_HEAD(apm_waitqueue);
88 static DECLARE_WAIT_QUEUE_HEAD(apm_suspend_waitqueue);
91 * This is a list of everyone who has opened /dev/apm_bios
93 static DECLARE_RWSEM(user_list_lock);
94 static LIST_HEAD(apm_user_list);
97 * kapmd info. kapmd provides us a process context to handle
98 * "APM" events within - specifically necessary if we're going
99 * to be suspending the system.
101 static DECLARE_WAIT_QUEUE_HEAD(kapmd_wait);
102 static DEFINE_SPINLOCK(kapmd_queue_lock);
103 static struct apm_queue kapmd_queue;
105 static DEFINE_MUTEX(state_lock);
107 static const char driver_version[] = "1.13"; /* no spaces */
112 * Compatibility cruft until the IPAQ people move over to the new
113 * interface.
115 static void __apm_get_power_status(struct apm_power_info *info)
120 * This allows machines to provide their own "apm get power status" function.
122 void (*apm_get_power_status)(struct apm_power_info *) = __apm_get_power_status;
123 EXPORT_SYMBOL(apm_get_power_status);
127 * APM event queue management.
129 static inline int queue_empty(struct apm_queue *q)
131 return q->event_head == q->event_tail;
134 static inline apm_event_t queue_get_event(struct apm_queue *q)
136 q->event_tail = (q->event_tail + 1) % APM_MAX_EVENTS;
137 return q->events[q->event_tail];
140 static void queue_add_event(struct apm_queue *q, apm_event_t event)
142 q->event_head = (q->event_head + 1) % APM_MAX_EVENTS;
143 if (q->event_head == q->event_tail) {
144 static int notified;
146 if (notified++ == 0)
147 printk(KERN_ERR "apm: an event queue overflowed\n");
148 q->event_tail = (q->event_tail + 1) % APM_MAX_EVENTS;
150 q->events[q->event_head] = event;
153 static void queue_event(apm_event_t event)
155 struct apm_user *as;
157 down_read(&user_list_lock);
158 list_for_each_entry(as, &apm_user_list, list) {
159 if (as->reader)
160 queue_add_event(&as->queue, event);
162 up_read(&user_list_lock);
163 wake_up_interruptible(&apm_waitqueue);
167 * queue_suspend_event - queue an APM suspend event.
169 * Check that we're in a state where we can suspend. If not,
170 * return -EBUSY. Otherwise, queue an event to all "writer"
171 * users. If there are no "writer" users, return '1' to
172 * indicate that we can immediately suspend.
174 static int queue_suspend_event(apm_event_t event, struct apm_user *sender)
176 struct apm_user *as;
177 int ret = 1;
179 mutex_lock(&state_lock);
180 down_read(&user_list_lock);
183 * If a thread is still processing, we can't suspend, so reject
184 * the request.
186 list_for_each_entry(as, &apm_user_list, list) {
187 if (as != sender && as->reader && as->writer && as->suser &&
188 as->suspend_state != SUSPEND_NONE) {
189 ret = -EBUSY;
190 goto out;
194 list_for_each_entry(as, &apm_user_list, list) {
195 if (as != sender && as->reader && as->writer && as->suser) {
196 as->suspend_state = SUSPEND_PENDING;
197 suspends_pending++;
198 queue_add_event(&as->queue, event);
199 ret = 0;
202 out:
203 up_read(&user_list_lock);
204 mutex_unlock(&state_lock);
205 wake_up_interruptible(&apm_waitqueue);
206 return ret;
209 static void apm_suspend(void)
211 struct apm_user *as;
212 int err = pm_suspend(PM_SUSPEND_MEM);
215 * Anyone on the APM queues will think we're still suspended.
216 * Send a message so everyone knows we're now awake again.
218 queue_event(APM_NORMAL_RESUME);
221 * Finally, wake up anyone who is sleeping on the suspend.
223 mutex_lock(&state_lock);
224 down_read(&user_list_lock);
225 list_for_each_entry(as, &apm_user_list, list) {
226 if (as->suspend_state == SUSPEND_WAIT ||
227 as->suspend_state == SUSPEND_ACKED) {
228 as->suspend_result = err;
229 as->suspend_state = SUSPEND_DONE;
232 up_read(&user_list_lock);
233 mutex_unlock(&state_lock);
235 wake_up(&apm_suspend_waitqueue);
238 static ssize_t apm_read(struct file *fp, char __user *buf, size_t count, loff_t *ppos)
240 struct apm_user *as = fp->private_data;
241 apm_event_t event;
242 int i = count, ret = 0;
244 if (count < sizeof(apm_event_t))
245 return -EINVAL;
247 if (queue_empty(&as->queue) && fp->f_flags & O_NONBLOCK)
248 return -EAGAIN;
250 wait_event_interruptible(apm_waitqueue, !queue_empty(&as->queue));
252 while ((i >= sizeof(event)) && !queue_empty(&as->queue)) {
253 event = queue_get_event(&as->queue);
255 ret = -EFAULT;
256 if (copy_to_user(buf, &event, sizeof(event)))
257 break;
259 mutex_lock(&state_lock);
260 if (as->suspend_state == SUSPEND_PENDING &&
261 (event == APM_SYS_SUSPEND || event == APM_USER_SUSPEND))
262 as->suspend_state = SUSPEND_READ;
263 mutex_unlock(&state_lock);
265 buf += sizeof(event);
266 i -= sizeof(event);
269 if (i < count)
270 ret = count - i;
272 return ret;
275 static unsigned int apm_poll(struct file *fp, poll_table * wait)
277 struct apm_user *as = fp->private_data;
279 poll_wait(fp, &apm_waitqueue, wait);
280 return queue_empty(&as->queue) ? 0 : POLLIN | POLLRDNORM;
284 * apm_ioctl - handle APM ioctl
286 * APM_IOC_SUSPEND
287 * This IOCTL is overloaded, and performs two functions. It is used to:
288 * - initiate a suspend
289 * - acknowledge a suspend read from /dev/apm_bios.
290 * Only when everyone who has opened /dev/apm_bios with write permission
291 * has acknowledge does the actual suspend happen.
293 static int
294 apm_ioctl(struct inode * inode, struct file *filp, u_int cmd, u_long arg)
296 struct apm_user *as = filp->private_data;
297 unsigned long flags;
298 int err = -EINVAL;
300 if (!as->suser || !as->writer)
301 return -EPERM;
303 switch (cmd) {
304 case APM_IOC_SUSPEND:
305 mutex_lock(&state_lock);
307 as->suspend_result = -EINTR;
309 if (as->suspend_state == SUSPEND_READ) {
310 int pending;
313 * If we read a suspend command from /dev/apm_bios,
314 * then the corresponding APM_IOC_SUSPEND ioctl is
315 * interpreted as an acknowledge.
317 as->suspend_state = SUSPEND_ACKED;
318 suspends_pending--;
319 pending = suspends_pending == 0;
320 mutex_unlock(&state_lock);
323 * If there are no further acknowledges required,
324 * suspend the system.
326 if (pending)
327 apm_suspend();
330 * Wait for the suspend/resume to complete. If there
331 * are pending acknowledges, we wait here for them.
333 * Note: we need to ensure that the PM subsystem does
334 * not kick us out of the wait when it suspends the
335 * threads.
337 flags = current->flags;
338 current->flags |= PF_NOFREEZE;
340 wait_event(apm_suspend_waitqueue,
341 as->suspend_state == SUSPEND_DONE);
342 } else {
343 as->suspend_state = SUSPEND_WAIT;
344 mutex_unlock(&state_lock);
347 * Otherwise it is a request to suspend the system.
348 * Queue an event for all readers, and expect an
349 * acknowledge from all writers who haven't already
350 * acknowledged.
352 err = queue_suspend_event(APM_USER_SUSPEND, as);
353 if (err < 0) {
355 * Avoid taking the lock here - this
356 * should be fine.
358 as->suspend_state = SUSPEND_NONE;
359 break;
362 if (err > 0)
363 apm_suspend();
366 * Wait for the suspend/resume to complete. If there
367 * are pending acknowledges, we wait here for them.
369 * Note: we need to ensure that the PM subsystem does
370 * not kick us out of the wait when it suspends the
371 * threads.
373 flags = current->flags;
374 current->flags |= PF_NOFREEZE;
376 wait_event_interruptible(apm_suspend_waitqueue,
377 as->suspend_state == SUSPEND_DONE);
380 current->flags = flags;
382 mutex_lock(&state_lock);
383 err = as->suspend_result;
384 as->suspend_state = SUSPEND_NONE;
385 mutex_unlock(&state_lock);
386 break;
389 return err;
392 static int apm_release(struct inode * inode, struct file * filp)
394 struct apm_user *as = filp->private_data;
395 int pending = 0;
397 filp->private_data = NULL;
399 down_write(&user_list_lock);
400 list_del(&as->list);
401 up_write(&user_list_lock);
404 * We are now unhooked from the chain. As far as new
405 * events are concerned, we no longer exist. However, we
406 * need to balance suspends_pending, which means the
407 * possibility of sleeping.
409 mutex_lock(&state_lock);
410 if (as->suspend_state != SUSPEND_NONE) {
411 suspends_pending -= 1;
412 pending = suspends_pending == 0;
414 mutex_unlock(&state_lock);
415 if (pending)
416 apm_suspend();
418 kfree(as);
419 return 0;
422 static int apm_open(struct inode * inode, struct file * filp)
424 struct apm_user *as;
426 as = kzalloc(sizeof(*as), GFP_KERNEL);
427 if (as) {
429 * XXX - this is a tiny bit broken, when we consider BSD
430 * process accounting. If the device is opened by root, we
431 * instantly flag that we used superuser privs. Who knows,
432 * we might close the device immediately without doing a
433 * privileged operation -- cevans
435 as->suser = capable(CAP_SYS_ADMIN);
436 as->writer = (filp->f_mode & FMODE_WRITE) == FMODE_WRITE;
437 as->reader = (filp->f_mode & FMODE_READ) == FMODE_READ;
439 down_write(&user_list_lock);
440 list_add(&as->list, &apm_user_list);
441 up_write(&user_list_lock);
443 filp->private_data = as;
446 return as ? 0 : -ENOMEM;
449 static struct file_operations apm_bios_fops = {
450 .owner = THIS_MODULE,
451 .read = apm_read,
452 .poll = apm_poll,
453 .ioctl = apm_ioctl,
454 .open = apm_open,
455 .release = apm_release,
458 static struct miscdevice apm_device = {
459 .minor = APM_MINOR_DEV,
460 .name = "apm_bios",
461 .fops = &apm_bios_fops
465 #ifdef CONFIG_PROC_FS
467 * Arguments, with symbols from linux/apm_bios.h.
469 * 0) Linux driver version (this will change if format changes)
470 * 1) APM BIOS Version. Usually 1.0, 1.1 or 1.2.
471 * 2) APM flags from APM Installation Check (0x00):
472 * bit 0: APM_16_BIT_SUPPORT
473 * bit 1: APM_32_BIT_SUPPORT
474 * bit 2: APM_IDLE_SLOWS_CLOCK
475 * bit 3: APM_BIOS_DISABLED
476 * bit 4: APM_BIOS_DISENGAGED
477 * 3) AC line status
478 * 0x00: Off-line
479 * 0x01: On-line
480 * 0x02: On backup power (BIOS >= 1.1 only)
481 * 0xff: Unknown
482 * 4) Battery status
483 * 0x00: High
484 * 0x01: Low
485 * 0x02: Critical
486 * 0x03: Charging
487 * 0x04: Selected battery not present (BIOS >= 1.2 only)
488 * 0xff: Unknown
489 * 5) Battery flag
490 * bit 0: High
491 * bit 1: Low
492 * bit 2: Critical
493 * bit 3: Charging
494 * bit 7: No system battery
495 * 0xff: Unknown
496 * 6) Remaining battery life (percentage of charge):
497 * 0-100: valid
498 * -1: Unknown
499 * 7) Remaining battery life (time units):
500 * Number of remaining minutes or seconds
501 * -1: Unknown
502 * 8) min = minutes; sec = seconds
504 static int apm_get_info(char *buf, char **start, off_t fpos, int length)
506 struct apm_power_info info;
507 char *units;
508 int ret;
510 info.ac_line_status = 0xff;
511 info.battery_status = 0xff;
512 info.battery_flag = 0xff;
513 info.battery_life = -1;
514 info.time = -1;
515 info.units = -1;
517 if (apm_get_power_status)
518 apm_get_power_status(&info);
520 switch (info.units) {
521 default: units = "?"; break;
522 case 0: units = "min"; break;
523 case 1: units = "sec"; break;
526 ret = sprintf(buf, "%s 1.2 0x%02x 0x%02x 0x%02x 0x%02x %d%% %d %s\n",
527 driver_version, APM_32_BIT_SUPPORT,
528 info.ac_line_status, info.battery_status,
529 info.battery_flag, info.battery_life,
530 info.time, units);
532 return ret;
534 #endif
536 static int kapmd(void *arg)
538 do {
539 apm_event_t event;
540 int ret;
542 wait_event_interruptible(kapmd_wait,
543 !queue_empty(&kapmd_queue) || kthread_should_stop());
545 if (kthread_should_stop())
546 break;
548 spin_lock_irq(&kapmd_queue_lock);
549 event = 0;
550 if (!queue_empty(&kapmd_queue))
551 event = queue_get_event(&kapmd_queue);
552 spin_unlock_irq(&kapmd_queue_lock);
554 switch (event) {
555 case 0:
556 break;
558 case APM_LOW_BATTERY:
559 case APM_POWER_STATUS_CHANGE:
560 queue_event(event);
561 break;
563 case APM_USER_SUSPEND:
564 case APM_SYS_SUSPEND:
565 ret = queue_suspend_event(event, NULL);
566 if (ret < 0) {
568 * We were busy. Try again in 50ms.
570 queue_add_event(&kapmd_queue, event);
571 msleep(50);
573 if (ret > 0)
574 apm_suspend();
575 break;
577 case APM_CRITICAL_SUSPEND:
578 apm_suspend();
579 break;
581 } while (1);
583 return 0;
586 static int __init apm_init(void)
588 int ret;
590 if (apm_disabled) {
591 printk(KERN_NOTICE "apm: disabled on user request.\n");
592 return -ENODEV;
595 kapmd_tsk = kthread_create(kapmd, NULL, "kapmd");
596 if (IS_ERR(kapmd_tsk)) {
597 ret = PTR_ERR(kapmd_tsk);
598 kapmd_tsk = NULL;
599 return ret;
601 kapmd_tsk->flags |= PF_NOFREEZE;
602 wake_up_process(kapmd_tsk);
604 #ifdef CONFIG_PROC_FS
605 create_proc_info_entry("apm", 0, NULL, apm_get_info);
606 #endif
608 ret = misc_register(&apm_device);
609 if (ret != 0) {
610 remove_proc_entry("apm", NULL);
611 kthread_stop(kapmd_tsk);
614 return ret;
617 static void __exit apm_exit(void)
619 misc_deregister(&apm_device);
620 remove_proc_entry("apm", NULL);
622 kthread_stop(kapmd_tsk);
625 module_init(apm_init);
626 module_exit(apm_exit);
628 MODULE_AUTHOR("Stephen Rothwell");
629 MODULE_DESCRIPTION("Advanced Power Management");
630 MODULE_LICENSE("GPL");
632 #ifndef MODULE
633 static int __init apm_setup(char *str)
635 while ((str != NULL) && (*str != '\0')) {
636 if (strncmp(str, "off", 3) == 0)
637 apm_disabled = 1;
638 if (strncmp(str, "on", 2) == 0)
639 apm_disabled = 0;
640 str = strchr(str, ',');
641 if (str != NULL)
642 str += strspn(str, ", \t");
644 return 1;
647 __setup("apm=", apm_setup);
648 #endif
651 * apm_queue_event - queue an APM event for kapmd
652 * @event: APM event
654 * Queue an APM event for kapmd to process and ultimately take the
655 * appropriate action. Only a subset of events are handled:
656 * %APM_LOW_BATTERY
657 * %APM_POWER_STATUS_CHANGE
658 * %APM_USER_SUSPEND
659 * %APM_SYS_SUSPEND
660 * %APM_CRITICAL_SUSPEND
662 void apm_queue_event(apm_event_t event)
664 unsigned long flags;
666 spin_lock_irqsave(&kapmd_queue_lock, flags);
667 queue_add_event(&kapmd_queue, event);
668 spin_unlock_irqrestore(&kapmd_queue_lock, flags);
670 wake_up_interruptible(&kapmd_wait);
672 EXPORT_SYMBOL(apm_queue_event);