?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
[PATCH] x86_64 early quirks: fix early_qrk[] section tag
[linux-2.6/openmoko-kernel/knife-kernel.git] / drivers / usb / gadget / serial.c
blobe552668d36b323a3ad06941cefe1c66a196b8353
1 /*
2 * g_serial.c -- USB gadget serial driver
3 *
4 * Copyright 2003 (C) Al Borchers (alborchers@steinerpoint.com)
5 *
6 * This code is based in part on the Gadget Zero driver, which
7 * is Copyright (C) 2003 by David Brownell, all rights reserved.
8 *
9 * This code also borrows from usbserial.c, which is
10 * Copyright (C) 1999 - 2002 Greg Kroah-Hartman (greg@kroah.com)
11 * Copyright (C) 2000 Peter Berger (pberger@brimson.com)
12 * Copyright (C) 2000 Al Borchers (alborchers@steinerpoint.com)
13 *
14 * This software is distributed under the terms of the GNU General
15 * Public License ("GPL") as published by the Free Software Foundation,
16 * either version 2 of that License or (at your option) any later version.
17 *
18 */
19
20 #include <linux/module.h>
21 #include <linux/kernel.h>
22 #include <linux/delay.h>
23 #include <linux/ioport.h>
24 #include <linux/slab.h>
25 #include <linux/smp_lock.h>
26 #include <linux/errno.h>
27 #include <linux/init.h>
28 #include <linux/timer.h>
29 #include <linux/list.h>
30 #include <linux/interrupt.h>
31 #include <linux/utsname.h>
32 #include <linux/wait.h>
33 #include <linux/proc_fs.h>
34 #include <linux/device.h>
35 #include <linux/tty.h>
36 #include <linux/tty_flip.h>
37
38 #include <asm/byteorder.h>
39 #include <asm/io.h>
40 #include <asm/irq.h>
41 #include <asm/system.h>
42 #include <asm/unaligned.h>
43 #include <asm/uaccess.h>
44
45 #include <linux/usb/ch9.h>
46 #include <linux/usb/cdc.h>
47 #include <linux/usb_gadget.h>
48
49 #include "gadget_chips.h"
50
51
52 /* Defines */
53
54 #define GS_VERSION_STR "v2.2"
55 #define GS_VERSION_NUM 0x0202
56
57 #define GS_LONG_NAME "Gadget Serial"
58 #define GS_SHORT_NAME "g_serial"
59
60 #define GS_MAJOR 127
61 #define GS_MINOR_START 0
62
63 #define GS_NUM_PORTS 16
64
65 #define GS_NUM_CONFIGS 1
66 #define GS_NO_CONFIG_ID 0
67 #define GS_BULK_CONFIG_ID 1
68 #define GS_ACM_CONFIG_ID 2
69
70 #define GS_MAX_NUM_INTERFACES 2
71 #define GS_BULK_INTERFACE_ID 0
72 #define GS_CONTROL_INTERFACE_ID 0
73 #define GS_DATA_INTERFACE_ID 1
74
75 #define GS_MAX_DESC_LEN 256
76
77 #define GS_DEFAULT_READ_Q_SIZE 32
78 #define GS_DEFAULT_WRITE_Q_SIZE 32
79
80 #define GS_DEFAULT_WRITE_BUF_SIZE 8192
81 #define GS_TMP_BUF_SIZE 8192
82
83 #define GS_CLOSE_TIMEOUT 15
84
85 #define GS_DEFAULT_USE_ACM 0
86
87 #define GS_DEFAULT_DTE_RATE 9600
88 #define GS_DEFAULT_DATA_BITS 8
89 #define GS_DEFAULT_PARITY USB_CDC_NO_PARITY
90 #define GS_DEFAULT_CHAR_FORMAT USB_CDC_1_STOP_BITS
91
92 /* select highspeed/fullspeed, hiding highspeed if not configured */
93 #ifdef CONFIG_USB_GADGET_DUALSPEED
94 #define GS_SPEED_SELECT(is_hs,hs,fs) ((is_hs) ? (hs) : (fs))
95 #else
96 #define GS_SPEED_SELECT(is_hs,hs,fs) (fs)
97 #endif /* CONFIG_USB_GADGET_DUALSPEED */
98
99 /* debug settings */
100 #ifdef GS_DEBUG
101 static int debug = 1;
102
103 #define gs_debug(format, arg...) \
104 do { if (debug) printk(KERN_DEBUG format, ## arg); } while(0)
105 #define gs_debug_level(level, format, arg...) \
106 do { if (debug>=level) printk(KERN_DEBUG format, ## arg); } while(0)
107
108 #else
109
110 #define gs_debug(format, arg...) \
111 do { } while(0)
112 #define gs_debug_level(level, format, arg...) \
113 do { } while(0)
114
115 #endif /* GS_DEBUG */
116
117 /* Thanks to NetChip Technologies for donating this product ID.
118 *
119 * DO NOT REUSE THESE IDs with a protocol-incompatible driver!! Ever!!
120 * Instead: allocate your own, using normal USB-IF procedures.
121 */
122 #define GS_VENDOR_ID 0x0525 /* NetChip */
123 #define GS_PRODUCT_ID 0xa4a6 /* Linux-USB Serial Gadget */
124 #define GS_CDC_PRODUCT_ID 0xa4a7 /* ... as CDC-ACM */
125
126 #define GS_LOG2_NOTIFY_INTERVAL 5 /* 1 << 5 == 32 msec */
127 #define GS_NOTIFY_MAXPACKET 8
128
129
130 /* Structures */
131
132 struct gs_dev;
133
134 /* circular buffer */
135 struct gs_buf {
136 unsigned int buf_size;
137 char *buf_buf;
138 char *buf_get;
139 char *buf_put;
140 };
141
142 /* list of requests */
143 struct gs_req_entry {
144 struct list_head re_entry;
145 struct usb_request *re_req;
146 };
147
148 /* the port structure holds info for each port, one for each minor number */
149 struct gs_port {
150 struct gs_dev *port_dev; /* pointer to device struct */
151 struct tty_struct *port_tty; /* pointer to tty struct */
152 spinlock_t port_lock;
153 int port_num;
154 int port_open_count;
155 int port_in_use; /* open/close in progress */
156 wait_queue_head_t port_write_wait;/* waiting to write */
157 struct gs_buf *port_write_buf;
158 struct usb_cdc_line_coding port_line_coding;
159 };
160
161 /* the device structure holds info for the USB device */
162 struct gs_dev {
163 struct usb_gadget *dev_gadget; /* gadget device pointer */
164 spinlock_t dev_lock; /* lock for set/reset config */
165 int dev_config; /* configuration number */
166 struct usb_ep *dev_notify_ep; /* address of notify endpoint */
167 struct usb_ep *dev_in_ep; /* address of in endpoint */
168 struct usb_ep *dev_out_ep; /* address of out endpoint */
169 struct usb_endpoint_descriptor /* descriptor of notify ep */
170 *dev_notify_ep_desc;
171 struct usb_endpoint_descriptor /* descriptor of in endpoint */
172 *dev_in_ep_desc;
173 struct usb_endpoint_descriptor /* descriptor of out endpoint */
174 *dev_out_ep_desc;
175 struct usb_request *dev_ctrl_req; /* control request */
176 struct list_head dev_req_list; /* list of write requests */
177 int dev_sched_port; /* round robin port scheduled */
178 struct gs_port *dev_port[GS_NUM_PORTS]; /* the ports */
179 };
180
181
182 /* Functions */
183
184 /* module */
185 static int __init gs_module_init(void);
186 static void __exit gs_module_exit(void);
187
188 /* tty driver */
189 static int gs_open(struct tty_struct *tty, struct file *file);
190 static void gs_close(struct tty_struct *tty, struct file *file);
191 static int gs_write(struct tty_struct *tty,
192 const unsigned char *buf, int count);
193 static void gs_put_char(struct tty_struct *tty, unsigned char ch);
194 static void gs_flush_chars(struct tty_struct *tty);
195 static int gs_write_room(struct tty_struct *tty);
196 static int gs_chars_in_buffer(struct tty_struct *tty);
197 static void gs_throttle(struct tty_struct * tty);
198 static void gs_unthrottle(struct tty_struct * tty);
199 static void gs_break(struct tty_struct *tty, int break_state);
200 static int gs_ioctl(struct tty_struct *tty, struct file *file,
201 unsigned int cmd, unsigned long arg);
202 static void gs_set_termios(struct tty_struct *tty, struct ktermios *old);
203
204 static int gs_send(struct gs_dev *dev);
205 static int gs_send_packet(struct gs_dev *dev, char *packet,
206 unsigned int size);
207 static int gs_recv_packet(struct gs_dev *dev, char *packet,
208 unsigned int size);
209 static void gs_read_complete(struct usb_ep *ep, struct usb_request *req);
210 static void gs_write_complete(struct usb_ep *ep, struct usb_request *req);
211
212 /* gadget driver */
213 static int gs_bind(struct usb_gadget *gadget);
214 static void gs_unbind(struct usb_gadget *gadget);
215 static int gs_setup(struct usb_gadget *gadget,
216 const struct usb_ctrlrequest *ctrl);
217 static int gs_setup_standard(struct usb_gadget *gadget,
218 const struct usb_ctrlrequest *ctrl);
219 static int gs_setup_class(struct usb_gadget *gadget,
220 const struct usb_ctrlrequest *ctrl);
221 static void gs_setup_complete(struct usb_ep *ep, struct usb_request *req);
222 static void gs_disconnect(struct usb_gadget *gadget);
223 static int gs_set_config(struct gs_dev *dev, unsigned config);
224 static void gs_reset_config(struct gs_dev *dev);
225 static int gs_build_config_buf(u8 *buf, enum usb_device_speed speed,
226 u8 type, unsigned int index, int is_otg);
227
228 static struct usb_request *gs_alloc_req(struct usb_ep *ep, unsigned int len,
229 gfp_t kmalloc_flags);
230 static void gs_free_req(struct usb_ep *ep, struct usb_request *req);
231
232 static struct gs_req_entry *gs_alloc_req_entry(struct usb_ep *ep, unsigned len,
233 gfp_t kmalloc_flags);
234 static void gs_free_req_entry(struct usb_ep *ep, struct gs_req_entry *req);
235
236 static int gs_alloc_ports(struct gs_dev *dev, gfp_t kmalloc_flags);
237 static void gs_free_ports(struct gs_dev *dev);
238
239 /* circular buffer */
240 static struct gs_buf *gs_buf_alloc(unsigned int size, gfp_t kmalloc_flags);
241 static void gs_buf_free(struct gs_buf *gb);
242 static void gs_buf_clear(struct gs_buf *gb);
243 static unsigned int gs_buf_data_avail(struct gs_buf *gb);
244 static unsigned int gs_buf_space_avail(struct gs_buf *gb);
245 static unsigned int gs_buf_put(struct gs_buf *gb, const char *buf,
246 unsigned int count);
247 static unsigned int gs_buf_get(struct gs_buf *gb, char *buf,
248 unsigned int count);
249
250 /* external functions */
251 extern int net2280_set_fifo_mode(struct usb_gadget *gadget, int mode);
252
253
254 /* Globals */
255
256 static struct gs_dev *gs_device;
257
258 static const char *EP_IN_NAME;
259 static const char *EP_OUT_NAME;
260 static const char *EP_NOTIFY_NAME;
261
262 static struct semaphore gs_open_close_sem[GS_NUM_PORTS];
263
264 static unsigned int read_q_size = GS_DEFAULT_READ_Q_SIZE;
265 static unsigned int write_q_size = GS_DEFAULT_WRITE_Q_SIZE;
266
267 static unsigned int write_buf_size = GS_DEFAULT_WRITE_BUF_SIZE;
268
269 static unsigned int use_acm = GS_DEFAULT_USE_ACM;
270
271
272 /* tty driver struct */
273 static const struct tty_operations gs_tty_ops = {
274 .open = gs_open,
275 .close = gs_close,
276 .write = gs_write,
277 .put_char = gs_put_char,
278 .flush_chars = gs_flush_chars,
279 .write_room = gs_write_room,
280 .ioctl = gs_ioctl,
281 .set_termios = gs_set_termios,
282 .throttle = gs_throttle,
283 .unthrottle = gs_unthrottle,
284 .break_ctl = gs_break,
285 .chars_in_buffer = gs_chars_in_buffer,
286 };
287 static struct tty_driver *gs_tty_driver;
288
289 /* gadget driver struct */
290 static struct usb_gadget_driver gs_gadget_driver = {
291 #ifdef CONFIG_USB_GADGET_DUALSPEED
292 .speed = USB_SPEED_HIGH,
293 #else
294 .speed = USB_SPEED_FULL,
295 #endif /* CONFIG_USB_GADGET_DUALSPEED */
296 .function = GS_LONG_NAME,
297 .bind = gs_bind,
298 .unbind = gs_unbind,
299 .setup = gs_setup,
300 .disconnect = gs_disconnect,
301 .driver = {
302 .name = GS_SHORT_NAME,
303 },
304 };
305
306
307 /* USB descriptors */
308
309 #define GS_MANUFACTURER_STR_ID 1
310 #define GS_PRODUCT_STR_ID 2
311 #define GS_SERIAL_STR_ID 3
312 #define GS_BULK_CONFIG_STR_ID 4
313 #define GS_ACM_CONFIG_STR_ID 5
314 #define GS_CONTROL_STR_ID 6
315 #define GS_DATA_STR_ID 7
316
317 /* static strings, in UTF-8 */
318 static char manufacturer[50];
319 static struct usb_string gs_strings[] = {
320 { GS_MANUFACTURER_STR_ID, manufacturer },
321 { GS_PRODUCT_STR_ID, GS_LONG_NAME },
322 { GS_SERIAL_STR_ID, "0" },
323 { GS_BULK_CONFIG_STR_ID, "Gadget Serial Bulk" },
324 { GS_ACM_CONFIG_STR_ID, "Gadget Serial CDC ACM" },
325 { GS_CONTROL_STR_ID, "Gadget Serial Control" },
326 { GS_DATA_STR_ID, "Gadget Serial Data" },
327 { } /* end of list */
328 };
329
330 static struct usb_gadget_strings gs_string_table = {
331 .language = 0x0409, /* en-us */
332 .strings = gs_strings,
333 };
334
335 static struct usb_device_descriptor gs_device_desc = {
336 .bLength = USB_DT_DEVICE_SIZE,
337 .bDescriptorType = USB_DT_DEVICE,
338 .bcdUSB = __constant_cpu_to_le16(0x0200),
339 .bDeviceSubClass = 0,
340 .bDeviceProtocol = 0,
341 .idVendor = __constant_cpu_to_le16(GS_VENDOR_ID),
342 .idProduct = __constant_cpu_to_le16(GS_PRODUCT_ID),
343 .iManufacturer = GS_MANUFACTURER_STR_ID,
344 .iProduct = GS_PRODUCT_STR_ID,
345 .iSerialNumber = GS_SERIAL_STR_ID,
346 .bNumConfigurations = GS_NUM_CONFIGS,
347 };
348
349 static struct usb_otg_descriptor gs_otg_descriptor = {
350 .bLength = sizeof(gs_otg_descriptor),
351 .bDescriptorType = USB_DT_OTG,
352 .bmAttributes = USB_OTG_SRP,
353 };
354
355 static struct usb_config_descriptor gs_bulk_config_desc = {
356 .bLength = USB_DT_CONFIG_SIZE,
357 .bDescriptorType = USB_DT_CONFIG,
358 /* .wTotalLength computed dynamically */
359 .bNumInterfaces = 1,
360 .bConfigurationValue = GS_BULK_CONFIG_ID,
361 .iConfiguration = GS_BULK_CONFIG_STR_ID,
362 .bmAttributes = USB_CONFIG_ATT_ONE | USB_CONFIG_ATT_SELFPOWER,
363 .bMaxPower = 1,
364 };
365
366 static struct usb_config_descriptor gs_acm_config_desc = {
367 .bLength = USB_DT_CONFIG_SIZE,
368 .bDescriptorType = USB_DT_CONFIG,
369 /* .wTotalLength computed dynamically */
370 .bNumInterfaces = 2,
371 .bConfigurationValue = GS_ACM_CONFIG_ID,
372 .iConfiguration = GS_ACM_CONFIG_STR_ID,
373 .bmAttributes = USB_CONFIG_ATT_ONE | USB_CONFIG_ATT_SELFPOWER,
374 .bMaxPower = 1,
375 };
376
377 static const struct usb_interface_descriptor gs_bulk_interface_desc = {
378 .bLength = USB_DT_INTERFACE_SIZE,
379 .bDescriptorType = USB_DT_INTERFACE,
380 .bInterfaceNumber = GS_BULK_INTERFACE_ID,
381 .bNumEndpoints = 2,
382 .bInterfaceClass = USB_CLASS_CDC_DATA,
383 .bInterfaceSubClass = 0,
384 .bInterfaceProtocol = 0,
385 .iInterface = GS_DATA_STR_ID,
386 };
387
388 static const struct usb_interface_descriptor gs_control_interface_desc = {
389 .bLength = USB_DT_INTERFACE_SIZE,
390 .bDescriptorType = USB_DT_INTERFACE,
391 .bInterfaceNumber = GS_CONTROL_INTERFACE_ID,
392 .bNumEndpoints = 1,
393 .bInterfaceClass = USB_CLASS_COMM,
394 .bInterfaceSubClass = USB_CDC_SUBCLASS_ACM,
395 .bInterfaceProtocol = USB_CDC_ACM_PROTO_AT_V25TER,
396 .iInterface = GS_CONTROL_STR_ID,
397 };
398
399 static const struct usb_interface_descriptor gs_data_interface_desc = {
400 .bLength = USB_DT_INTERFACE_SIZE,
401 .bDescriptorType = USB_DT_INTERFACE,
402 .bInterfaceNumber = GS_DATA_INTERFACE_ID,
403 .bNumEndpoints = 2,
404 .bInterfaceClass = USB_CLASS_CDC_DATA,
405 .bInterfaceSubClass = 0,
406 .bInterfaceProtocol = 0,
407 .iInterface = GS_DATA_STR_ID,
408 };
409
410 static const struct usb_cdc_header_desc gs_header_desc = {
411 .bLength = sizeof(gs_header_desc),
412 .bDescriptorType = USB_DT_CS_INTERFACE,
413 .bDescriptorSubType = USB_CDC_HEADER_TYPE,
414 .bcdCDC = __constant_cpu_to_le16(0x0110),
415 };
416
417 static const struct usb_cdc_call_mgmt_descriptor gs_call_mgmt_descriptor = {
418 .bLength = sizeof(gs_call_mgmt_descriptor),
419 .bDescriptorType = USB_DT_CS_INTERFACE,
420 .bDescriptorSubType = USB_CDC_CALL_MANAGEMENT_TYPE,
421 .bmCapabilities = 0,
422 .bDataInterface = 1, /* index of data interface */
423 };
424
425 static struct usb_cdc_acm_descriptor gs_acm_descriptor = {
426 .bLength = sizeof(gs_acm_descriptor),
427 .bDescriptorType = USB_DT_CS_INTERFACE,
428 .bDescriptorSubType = USB_CDC_ACM_TYPE,
429 .bmCapabilities = 0,
430 };
431
432 static const struct usb_cdc_union_desc gs_union_desc = {
433 .bLength = sizeof(gs_union_desc),
434 .bDescriptorType = USB_DT_CS_INTERFACE,
435 .bDescriptorSubType = USB_CDC_UNION_TYPE,
436 .bMasterInterface0 = 0, /* index of control interface */
437 .bSlaveInterface0 = 1, /* index of data interface */
438 };
439
440 static struct usb_endpoint_descriptor gs_fullspeed_notify_desc = {
441 .bLength = USB_DT_ENDPOINT_SIZE,
442 .bDescriptorType = USB_DT_ENDPOINT,
443 .bEndpointAddress = USB_DIR_IN,
444 .bmAttributes = USB_ENDPOINT_XFER_INT,
445 .wMaxPacketSize = __constant_cpu_to_le16(GS_NOTIFY_MAXPACKET),
446 .bInterval = 1 << GS_LOG2_NOTIFY_INTERVAL,
447 };
448
449 static struct usb_endpoint_descriptor gs_fullspeed_in_desc = {
450 .bLength = USB_DT_ENDPOINT_SIZE,
451 .bDescriptorType = USB_DT_ENDPOINT,
452 .bEndpointAddress = USB_DIR_IN,
453 .bmAttributes = USB_ENDPOINT_XFER_BULK,
454 };
455
456 static struct usb_endpoint_descriptor gs_fullspeed_out_desc = {
457 .bLength = USB_DT_ENDPOINT_SIZE,
458 .bDescriptorType = USB_DT_ENDPOINT,
459 .bEndpointAddress = USB_DIR_OUT,
460 .bmAttributes = USB_ENDPOINT_XFER_BULK,
461 };
462
463 static const struct usb_descriptor_header *gs_bulk_fullspeed_function[] = {
464 (struct usb_descriptor_header *) &gs_otg_descriptor,
465 (struct usb_descriptor_header *) &gs_bulk_interface_desc,
466 (struct usb_descriptor_header *) &gs_fullspeed_in_desc,
467 (struct usb_descriptor_header *) &gs_fullspeed_out_desc,
468 NULL,
469 };
470
471 static const struct usb_descriptor_header *gs_acm_fullspeed_function[] = {
472 (struct usb_descriptor_header *) &gs_otg_descriptor,
473 (struct usb_descriptor_header *) &gs_control_interface_desc,
474 (struct usb_descriptor_header *) &gs_header_desc,
475 (struct usb_descriptor_header *) &gs_call_mgmt_descriptor,
476 (struct usb_descriptor_header *) &gs_acm_descriptor,
477 (struct usb_descriptor_header *) &gs_union_desc,
478 (struct usb_descriptor_header *) &gs_fullspeed_notify_desc,
479 (struct usb_descriptor_header *) &gs_data_interface_desc,
480 (struct usb_descriptor_header *) &gs_fullspeed_in_desc,
481 (struct usb_descriptor_header *) &gs_fullspeed_out_desc,
482 NULL,
483 };
484
485 #ifdef CONFIG_USB_GADGET_DUALSPEED
486 static struct usb_endpoint_descriptor gs_highspeed_notify_desc = {
487 .bLength = USB_DT_ENDPOINT_SIZE,
488 .bDescriptorType = USB_DT_ENDPOINT,
489 .bEndpointAddress = USB_DIR_IN,
490 .bmAttributes = USB_ENDPOINT_XFER_INT,
491 .wMaxPacketSize = __constant_cpu_to_le16(GS_NOTIFY_MAXPACKET),
492 .bInterval = GS_LOG2_NOTIFY_INTERVAL+4,
493 };
494
495 static struct usb_endpoint_descriptor gs_highspeed_in_desc = {
496 .bLength = USB_DT_ENDPOINT_SIZE,
497 .bDescriptorType = USB_DT_ENDPOINT,
498 .bmAttributes = USB_ENDPOINT_XFER_BULK,
499 .wMaxPacketSize = __constant_cpu_to_le16(512),
500 };
501
502 static struct usb_endpoint_descriptor gs_highspeed_out_desc = {
503 .bLength = USB_DT_ENDPOINT_SIZE,
504 .bDescriptorType = USB_DT_ENDPOINT,
505 .bmAttributes = USB_ENDPOINT_XFER_BULK,
506 .wMaxPacketSize = __constant_cpu_to_le16(512),
507 };
508
509 static struct usb_qualifier_descriptor gs_qualifier_desc = {
510 .bLength = sizeof(struct usb_qualifier_descriptor),
511 .bDescriptorType = USB_DT_DEVICE_QUALIFIER,
512 .bcdUSB = __constant_cpu_to_le16 (0x0200),
513 /* assumes ep0 uses the same value for both speeds ... */
514 .bNumConfigurations = GS_NUM_CONFIGS,
515 };
516
517 static const struct usb_descriptor_header *gs_bulk_highspeed_function[] = {
518 (struct usb_descriptor_header *) &gs_otg_descriptor,
519 (struct usb_descriptor_header *) &gs_bulk_interface_desc,
520 (struct usb_descriptor_header *) &gs_highspeed_in_desc,
521 (struct usb_descriptor_header *) &gs_highspeed_out_desc,
522 NULL,
523 };
524
525 static const struct usb_descriptor_header *gs_acm_highspeed_function[] = {
526 (struct usb_descriptor_header *) &gs_otg_descriptor,
527 (struct usb_descriptor_header *) &gs_control_interface_desc,
528 (struct usb_descriptor_header *) &gs_header_desc,
529 (struct usb_descriptor_header *) &gs_call_mgmt_descriptor,
530 (struct usb_descriptor_header *) &gs_acm_descriptor,
531 (struct usb_descriptor_header *) &gs_union_desc,
532 (struct usb_descriptor_header *) &gs_highspeed_notify_desc,
533 (struct usb_descriptor_header *) &gs_data_interface_desc,
534 (struct usb_descriptor_header *) &gs_highspeed_in_desc,
535 (struct usb_descriptor_header *) &gs_highspeed_out_desc,
536 NULL,
537 };
538
539 #endif /* CONFIG_USB_GADGET_DUALSPEED */
540
541
542 /* Module */
543 MODULE_DESCRIPTION(GS_LONG_NAME);
544 MODULE_AUTHOR("Al Borchers");
545 MODULE_LICENSE("GPL");
546
547 #ifdef GS_DEBUG
548 module_param(debug, int, S_IRUGO|S_IWUSR);
549 MODULE_PARM_DESC(debug, "Enable debugging, 0=off, 1=on");
550 #endif
551
552 module_param(read_q_size, uint, S_IRUGO);
553 MODULE_PARM_DESC(read_q_size, "Read request queue size, default=32");
554
555 module_param(write_q_size, uint, S_IRUGO);
556 MODULE_PARM_DESC(write_q_size, "Write request queue size, default=32");
557
558 module_param(write_buf_size, uint, S_IRUGO);
559 MODULE_PARM_DESC(write_buf_size, "Write buffer size, default=8192");
560
561 module_param(use_acm, uint, S_IRUGO);
562 MODULE_PARM_DESC(use_acm, "Use CDC ACM, 0=no, 1=yes, default=no");
563
564 module_init(gs_module_init);
565 module_exit(gs_module_exit);
566
567 /*
568 * gs_module_init
569 *
570 * Register as a USB gadget driver and a tty driver.
571 */
572 static int __init gs_module_init(void)
573 {
574 int i;
575 int retval;
576
577 retval = usb_gadget_register_driver(&gs_gadget_driver);
578 if (retval) {
579 printk(KERN_ERR "gs_module_init: cannot register gadget driver, ret=%d\n", retval);
580 return retval;
581 }
582
583 gs_tty_driver = alloc_tty_driver(GS_NUM_PORTS);
584 if (!gs_tty_driver)
585 return -ENOMEM;
586 gs_tty_driver->owner = THIS_MODULE;
587 gs_tty_driver->driver_name = GS_SHORT_NAME;
588 gs_tty_driver->name = "ttygs";
589 gs_tty_driver->major = GS_MAJOR;
590 gs_tty_driver->minor_start = GS_MINOR_START;
591 gs_tty_driver->type = TTY_DRIVER_TYPE_SERIAL;
592 gs_tty_driver->subtype = SERIAL_TYPE_NORMAL;
593 gs_tty_driver->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV;
594 gs_tty_driver->init_termios = tty_std_termios;
595 gs_tty_driver->init_termios.c_cflag = B9600 | CS8 | CREAD | HUPCL | CLOCAL;
596 tty_set_operations(gs_tty_driver, &gs_tty_ops);
597
598 for (i=0; i < GS_NUM_PORTS; i++)
599 sema_init(&gs_open_close_sem[i], 1);
600
601 retval = tty_register_driver(gs_tty_driver);
602 if (retval) {
603 usb_gadget_unregister_driver(&gs_gadget_driver);
604 put_tty_driver(gs_tty_driver);
605 printk(KERN_ERR "gs_module_init: cannot register tty driver, ret=%d\n", retval);
606 return retval;
607 }
608
609 printk(KERN_INFO "gs_module_init: %s %s loaded\n", GS_LONG_NAME, GS_VERSION_STR);
610 return 0;
611 }
612
613 /*
614 * gs_module_exit
615 *
616 * Unregister as a tty driver and a USB gadget driver.
617 */
618 static void __exit gs_module_exit(void)
619 {
620 tty_unregister_driver(gs_tty_driver);
621 put_tty_driver(gs_tty_driver);
622 usb_gadget_unregister_driver(&gs_gadget_driver);
623
624 printk(KERN_INFO "gs_module_exit: %s %s unloaded\n", GS_LONG_NAME, GS_VERSION_STR);
625 }
626
627 /* TTY Driver */
628
629 /*
630 * gs_open
631 */
632 static int gs_open(struct tty_struct *tty, struct file *file)
633 {
634 int port_num;
635 unsigned long flags;
636 struct gs_port *port;
637 struct gs_dev *dev;
638 struct gs_buf *buf;
639 struct semaphore *sem;
640 int ret;
641
642 port_num = tty->index;
643
644 gs_debug("gs_open: (%d,%p,%p)\n", port_num, tty, file);
645
646 if (port_num < 0 || port_num >= GS_NUM_PORTS) {
647 printk(KERN_ERR "gs_open: (%d,%p,%p) invalid port number\n",
648 port_num, tty, file);
649 return -ENODEV;
650 }
651
652 dev = gs_device;
653
654 if (dev == NULL) {
655 printk(KERN_ERR "gs_open: (%d,%p,%p) NULL device pointer\n",
656 port_num, tty, file);
657 return -ENODEV;
658 }
659
660 sem = &gs_open_close_sem[port_num];
661 if (down_interruptible(sem)) {
662 printk(KERN_ERR
663 "gs_open: (%d,%p,%p) interrupted waiting for semaphore\n",
664 port_num, tty, file);
665 return -ERESTARTSYS;
666 }
667
668 spin_lock_irqsave(&dev->dev_lock, flags);
669
670 if (dev->dev_config == GS_NO_CONFIG_ID) {
671 printk(KERN_ERR
672 "gs_open: (%d,%p,%p) device is not connected\n",
673 port_num, tty, file);
674 ret = -ENODEV;
675 goto exit_unlock_dev;
676 }
677
678 port = dev->dev_port[port_num];
679
680 if (port == NULL) {
681 printk(KERN_ERR "gs_open: (%d,%p,%p) NULL port pointer\n",
682 port_num, tty, file);
683 ret = -ENODEV;
684 goto exit_unlock_dev;
685 }
686
687 spin_lock(&port->port_lock);
688 spin_unlock(&dev->dev_lock);
689
690 if (port->port_dev == NULL) {
691 printk(KERN_ERR "gs_open: (%d,%p,%p) port disconnected (1)\n",
692 port_num, tty, file);
693 ret = -EIO;
694 goto exit_unlock_port;
695 }
696
697 if (port->port_open_count > 0) {
698 ++port->port_open_count;
699 gs_debug("gs_open: (%d,%p,%p) already open\n",
700 port_num, tty, file);
701 ret = 0;
702 goto exit_unlock_port;
703 }
704
705 tty->driver_data = NULL;
706
707 /* mark port as in use, we can drop port lock and sleep if necessary */
708 port->port_in_use = 1;
709
710 /* allocate write buffer on first open */
711 if (port->port_write_buf == NULL) {
712 spin_unlock_irqrestore(&port->port_lock, flags);
713 buf = gs_buf_alloc(write_buf_size, GFP_KERNEL);
714 spin_lock_irqsave(&port->port_lock, flags);
715
716 /* might have been disconnected while asleep, check */
717 if (port->port_dev == NULL) {
718 printk(KERN_ERR
719 "gs_open: (%d,%p,%p) port disconnected (2)\n",
720 port_num, tty, file);
721 port->port_in_use = 0;
722 ret = -EIO;
723 goto exit_unlock_port;
724 }
725
726 if ((port->port_write_buf=buf) == NULL) {
727 printk(KERN_ERR "gs_open: (%d,%p,%p) cannot allocate port write buffer\n",
728 port_num, tty, file);
729 port->port_in_use = 0;
730 ret = -ENOMEM;
731 goto exit_unlock_port;
732 }
733
734 }
735
736 /* wait for carrier detect (not implemented) */
737
738 /* might have been disconnected while asleep, check */
739 if (port->port_dev == NULL) {
740 printk(KERN_ERR "gs_open: (%d,%p,%p) port disconnected (3)\n",
741 port_num, tty, file);
742 port->port_in_use = 0;
743 ret = -EIO;
744 goto exit_unlock_port;
745 }
746
747 tty->driver_data = port;
748 port->port_tty = tty;
749 port->port_open_count = 1;
750 port->port_in_use = 0;
751
752 gs_debug("gs_open: (%d,%p,%p) completed\n", port_num, tty, file);
753
754 ret = 0;
755
756 exit_unlock_port:
757 spin_unlock_irqrestore(&port->port_lock, flags);
758 up(sem);
759 return ret;
760
761 exit_unlock_dev:
762 spin_unlock_irqrestore(&dev->dev_lock, flags);
763 up(sem);
764 return ret;
765
766 }
767
768 /*
769 * gs_close
770 */
771
772 #define GS_WRITE_FINISHED_EVENT_SAFELY(p) \
773 ({ \
774 int cond; \
775 \
776 spin_lock_irq(&(p)->port_lock); \
777 cond = !(p)->port_dev || !gs_buf_data_avail((p)->port_write_buf); \
778 spin_unlock_irq(&(p)->port_lock); \
779 cond; \
780 })
781
782 static void gs_close(struct tty_struct *tty, struct file *file)
783 {
784 struct gs_port *port = tty->driver_data;
785 struct semaphore *sem;
786
787 if (port == NULL) {
788 printk(KERN_ERR "gs_close: NULL port pointer\n");
789 return;
790 }
791
792 gs_debug("gs_close: (%d,%p,%p)\n", port->port_num, tty, file);
793
794 sem = &gs_open_close_sem[port->port_num];
795 down(sem);
796
797 spin_lock_irq(&port->port_lock);
798
799 if (port->port_open_count == 0) {
800 printk(KERN_ERR
801 "gs_close: (%d,%p,%p) port is already closed\n",
802 port->port_num, tty, file);
803 goto exit;
804 }
805
806 if (port->port_open_count > 1) {
807 --port->port_open_count;
808 goto exit;
809 }
810
811 /* free disconnected port on final close */
812 if (port->port_dev == NULL) {
813 kfree(port);
814 goto exit;
815 }
816
817 /* mark port as closed but in use, we can drop port lock */
818 /* and sleep if necessary */
819 port->port_in_use = 1;
820 port->port_open_count = 0;
821
822 /* wait for write buffer to drain, or */
823 /* at most GS_CLOSE_TIMEOUT seconds */
824 if (gs_buf_data_avail(port->port_write_buf) > 0) {
825 spin_unlock_irq(&port->port_lock);
826 wait_event_interruptible_timeout(port->port_write_wait,
827 GS_WRITE_FINISHED_EVENT_SAFELY(port),
828 GS_CLOSE_TIMEOUT * HZ);
829 spin_lock_irq(&port->port_lock);
830 }
831
832 /* free disconnected port on final close */
833 /* (might have happened during the above sleep) */
834 if (port->port_dev == NULL) {
835 kfree(port);
836 goto exit;
837 }
838
839 gs_buf_clear(port->port_write_buf);
840
841 tty->driver_data = NULL;
842 port->port_tty = NULL;
843 port->port_in_use = 0;
844
845 gs_debug("gs_close: (%d,%p,%p) completed\n",
846 port->port_num, tty, file);
847
848 exit:
849 spin_unlock_irq(&port->port_lock);
850 up(sem);
851 }
852
853 /*
854 * gs_write
855 */
856 static int gs_write(struct tty_struct *tty, const unsigned char *buf, int count)
857 {
858 unsigned long flags;
859 struct gs_port *port = tty->driver_data;
860 int ret;
861
862 if (port == NULL) {
863 printk(KERN_ERR "gs_write: NULL port pointer\n");
864 return -EIO;
865 }
866
867 gs_debug("gs_write: (%d,%p) writing %d bytes\n", port->port_num, tty,
868 count);
869
870 if (count == 0)
871 return 0;
872
873 spin_lock_irqsave(&port->port_lock, flags);
874
875 if (port->port_dev == NULL) {
876 printk(KERN_ERR "gs_write: (%d,%p) port is not connected\n",
877 port->port_num, tty);
878 ret = -EIO;
879 goto exit;
880 }
881
882 if (port->port_open_count == 0) {
883 printk(KERN_ERR "gs_write: (%d,%p) port is closed\n",
884 port->port_num, tty);
885 ret = -EBADF;
886 goto exit;
887 }
888
889 count = gs_buf_put(port->port_write_buf, buf, count);
890
891 spin_unlock_irqrestore(&port->port_lock, flags);
892
893 gs_send(gs_device);
894
895 gs_debug("gs_write: (%d,%p) wrote %d bytes\n", port->port_num, tty,
896 count);
897
898 return count;
899
900 exit:
901 spin_unlock_irqrestore(&port->port_lock, flags);
902 return ret;
903 }
904
905 /*
906 * gs_put_char
907 */
908 static void gs_put_char(struct tty_struct *tty, unsigned char ch)
909 {
910 unsigned long flags;
911 struct gs_port *port = tty->driver_data;
912
913 if (port == NULL) {
914 printk(KERN_ERR "gs_put_char: NULL port pointer\n");
915 return;
916 }
917
918 gs_debug("gs_put_char: (%d,%p) char=0x%x, called from %p, %p, %p\n", port->port_num, tty, ch, __builtin_return_address(0), __builtin_return_address(1), __builtin_return_address(2));
919
920 spin_lock_irqsave(&port->port_lock, flags);
921
922 if (port->port_dev == NULL) {
923 printk(KERN_ERR "gs_put_char: (%d,%p) port is not connected\n",
924 port->port_num, tty);
925 goto exit;
926 }
927
928 if (port->port_open_count == 0) {
929 printk(KERN_ERR "gs_put_char: (%d,%p) port is closed\n",
930 port->port_num, tty);
931 goto exit;
932 }
933
934 gs_buf_put(port->port_write_buf, &ch, 1);
935
936 exit:
937 spin_unlock_irqrestore(&port->port_lock, flags);
938 }
939
940 /*
941 * gs_flush_chars
942 */
943 static void gs_flush_chars(struct tty_struct *tty)
944 {
945 unsigned long flags;
946 struct gs_port *port = tty->driver_data;
947
948 if (port == NULL) {
949 printk(KERN_ERR "gs_flush_chars: NULL port pointer\n");
950 return;
951 }
952
953 gs_debug("gs_flush_chars: (%d,%p)\n", port->port_num, tty);
954
955 spin_lock_irqsave(&port->port_lock, flags);
956
957 if (port->port_dev == NULL) {
958 printk(KERN_ERR
959 "gs_flush_chars: (%d,%p) port is not connected\n",
960 port->port_num, tty);
961 goto exit;
962 }
963
964 if (port->port_open_count == 0) {
965 printk(KERN_ERR "gs_flush_chars: (%d,%p) port is closed\n",
966 port->port_num, tty);
967 goto exit;
968 }
969
970 spin_unlock_irqrestore(&port->port_lock, flags);
971
972 gs_send(gs_device);
973
974 return;
975
976 exit:
977 spin_unlock_irqrestore(&port->port_lock, flags);
978 }
979
980 /*
981 * gs_write_room
982 */
983 static int gs_write_room(struct tty_struct *tty)
984 {
985
986 int room = 0;
987 unsigned long flags;
988 struct gs_port *port = tty->driver_data;
989
990
991 if (port == NULL)
992 return 0;
993
994 spin_lock_irqsave(&port->port_lock, flags);
995
996 if (port->port_dev != NULL && port->port_open_count > 0
997 && port->port_write_buf != NULL)
998 room = gs_buf_space_avail(port->port_write_buf);
999
1000 spin_unlock_irqrestore(&port->port_lock, flags);
1001
1002 gs_debug("gs_write_room: (%d,%p) room=%d\n",
1003 port->port_num, tty, room);
1004
1005 return room;
1006 }
1007
1008 /*
1009 * gs_chars_in_buffer
1010 */
1011 static int gs_chars_in_buffer(struct tty_struct *tty)
1012 {
1013 int chars = 0;
1014 unsigned long flags;
1015 struct gs_port *port = tty->driver_data;
1016
1017 if (port == NULL)
1018 return 0;
1019
1020 spin_lock_irqsave(&port->port_lock, flags);
1021
1022 if (port->port_dev != NULL && port->port_open_count > 0
1023 && port->port_write_buf != NULL)
1024 chars = gs_buf_data_avail(port->port_write_buf);
1025
1026 spin_unlock_irqrestore(&port->port_lock, flags);
1027
1028 gs_debug("gs_chars_in_buffer: (%d,%p) chars=%d\n",
1029 port->port_num, tty, chars);
1030
1031 return chars;
1032 }
1033
1034 /*
1035 * gs_throttle
1036 */
1037 static void gs_throttle(struct tty_struct *tty)
1038 {
1039 }
1040
1041 /*
1042 * gs_unthrottle
1043 */
1044 static void gs_unthrottle(struct tty_struct *tty)
1045 {
1046 }
1047
1048 /*
1049 * gs_break
1050 */
1051 static void gs_break(struct tty_struct *tty, int break_state)
1052 {
1053 }
1054
1055 /*
1056 * gs_ioctl
1057 */
1058 static int gs_ioctl(struct tty_struct *tty, struct file *file, unsigned int cmd, unsigned long arg)
1059 {
1060 struct gs_port *port = tty->driver_data;
1061
1062 if (port == NULL) {
1063 printk(KERN_ERR "gs_ioctl: NULL port pointer\n");
1064 return -EIO;
1065 }
1066
1067 gs_debug("gs_ioctl: (%d,%p,%p) cmd=0x%4.4x, arg=%lu\n",
1068 port->port_num, tty, file, cmd, arg);
1069
1070 /* handle ioctls */
1071
1072 /* could not handle ioctl */
1073 return -ENOIOCTLCMD;
1074 }
1075
1076 /*
1077 * gs_set_termios
1078 */
1079 static void gs_set_termios(struct tty_struct *tty, struct ktermios *old)
1080 {
1081 }
1082
1083 /*
1084 * gs_send
1085 *
1086 * This function finds available write requests, calls
1087 * gs_send_packet to fill these packets with data, and
1088 * continues until either there are no more write requests
1089 * available or no more data to send. This function is
1090 * run whenever data arrives or write requests are available.
1091 */
1092 static int gs_send(struct gs_dev *dev)
1093 {
1094 int ret,len;
1095 unsigned long flags;
1096 struct usb_ep *ep;
1097 struct usb_request *req;
1098 struct gs_req_entry *req_entry;
1099
1100 if (dev == NULL) {
1101 printk(KERN_ERR "gs_send: NULL device pointer\n");
1102 return -ENODEV;
1103 }
1104
1105 spin_lock_irqsave(&dev->dev_lock, flags);
1106
1107 ep = dev->dev_in_ep;
1108
1109 while(!list_empty(&dev->dev_req_list)) {
1110
1111 req_entry = list_entry(dev->dev_req_list.next,
1112 struct gs_req_entry, re_entry);
1113
1114 req = req_entry->re_req;
1115
1116 len = gs_send_packet(dev, req->buf, ep->maxpacket);
1117
1118 if (len > 0) {
1119 gs_debug_level(3, "gs_send: len=%d, 0x%2.2x 0x%2.2x 0x%2.2x ...\n", len, *((unsigned char *)req->buf), *((unsigned char *)req->buf+1), *((unsigned char *)req->buf+2));
1120 list_del(&req_entry->re_entry);
1121 req->length = len;
1122 spin_unlock_irqrestore(&dev->dev_lock, flags);
1123 if ((ret=usb_ep_queue(ep, req, GFP_ATOMIC))) {
1124 printk(KERN_ERR
1125 "gs_send: cannot queue read request, ret=%d\n",
1126 ret);
1127 spin_lock_irqsave(&dev->dev_lock, flags);
1128 break;
1129 }
1130 spin_lock_irqsave(&dev->dev_lock, flags);
1131 } else {
1132 break;
1133 }
1134
1135 }
1136
1137 spin_unlock_irqrestore(&dev->dev_lock, flags);
1138
1139 return 0;
1140 }
1141
1142 /*
1143 * gs_send_packet
1144 *
1145 * If there is data to send, a packet is built in the given
1146 * buffer and the size is returned. If there is no data to
1147 * send, 0 is returned. If there is any error a negative
1148 * error number is returned.
1149 *
1150 * Called during USB completion routine, on interrupt time.
1151 *
1152 * We assume that disconnect will not happen until all completion
1153 * routines have completed, so we can assume that the dev_port
1154 * array does not change during the lifetime of this function.
1155 */
1156 static int gs_send_packet(struct gs_dev *dev, char *packet, unsigned int size)
1157 {
1158 unsigned int len;
1159 struct gs_port *port;
1160
1161 /* TEMPORARY -- only port 0 is supported right now */
1162 port = dev->dev_port[0];
1163
1164 if (port == NULL) {
1165 printk(KERN_ERR
1166 "gs_send_packet: port=%d, NULL port pointer\n",
1167 0);
1168 return -EIO;
1169 }
1170
1171 spin_lock(&port->port_lock);
1172
1173 len = gs_buf_data_avail(port->port_write_buf);
1174 if (len < size)
1175 size = len;
1176
1177 if (size == 0)
1178 goto exit;
1179
1180 size = gs_buf_get(port->port_write_buf, packet, size);
1181
1182 if (port->port_tty)
1183 wake_up_interruptible(&port->port_tty->write_wait);
1184
1185 exit:
1186 spin_unlock(&port->port_lock);
1187 return size;
1188 }
1189
1190 /*
1191 * gs_recv_packet
1192 *
1193 * Called for each USB packet received. Reads the packet
1194 * header and stuffs the data in the appropriate tty buffer.
1195 * Returns 0 if successful, or a negative error number.
1196 *
1197 * Called during USB completion routine, on interrupt time.
1198 *
1199 * We assume that disconnect will not happen until all completion
1200 * routines have completed, so we can assume that the dev_port
1201 * array does not change during the lifetime of this function.
1202 */
1203 static int gs_recv_packet(struct gs_dev *dev, char *packet, unsigned int size)
1204 {
1205 unsigned int len;
1206 struct gs_port *port;
1207 int ret;
1208 struct tty_struct *tty;
1209
1210 /* TEMPORARY -- only port 0 is supported right now */
1211 port = dev->dev_port[0];
1212
1213 if (port == NULL) {
1214 printk(KERN_ERR "gs_recv_packet: port=%d, NULL port pointer\n",
1215 port->port_num);
1216 return -EIO;
1217 }
1218
1219 spin_lock(&port->port_lock);
1220
1221 if (port->port_open_count == 0) {
1222 printk(KERN_ERR "gs_recv_packet: port=%d, port is closed\n",
1223 port->port_num);
1224 ret = -EIO;
1225 goto exit;
1226 }
1227
1228
1229 tty = port->port_tty;
1230
1231 if (tty == NULL) {
1232 printk(KERN_ERR "gs_recv_packet: port=%d, NULL tty pointer\n",
1233 port->port_num);
1234 ret = -EIO;
1235 goto exit;
1236 }
1237
1238 if (port->port_tty->magic != TTY_MAGIC) {
1239 printk(KERN_ERR "gs_recv_packet: port=%d, bad tty magic\n",
1240 port->port_num);
1241 ret = -EIO;
1242 goto exit;
1243 }
1244
1245 len = tty_buffer_request_room(tty, size);
1246 if (len > 0) {
1247 tty_insert_flip_string(tty, packet, len);
1248 tty_flip_buffer_push(port->port_tty);
1249 wake_up_interruptible(&port->port_tty->read_wait);
1250 }
1251 ret = 0;
1252 exit:
1253 spin_unlock(&port->port_lock);
1254 return ret;
1255 }
1256
1257 /*
1258 * gs_read_complete
1259 */
1260 static void gs_read_complete(struct usb_ep *ep, struct usb_request *req)
1261 {
1262 int ret;
1263 struct gs_dev *dev = ep->driver_data;
1264
1265 if (dev == NULL) {
1266 printk(KERN_ERR "gs_read_complete: NULL device pointer\n");
1267 return;
1268 }
1269
1270 switch(req->status) {
1271 case 0:
1272 /* normal completion */
1273 gs_recv_packet(dev, req->buf, req->actual);
1274 requeue:
1275 req->length = ep->maxpacket;
1276 if ((ret=usb_ep_queue(ep, req, GFP_ATOMIC))) {
1277 printk(KERN_ERR
1278 "gs_read_complete: cannot queue read request, ret=%d\n",
1279 ret);
1280 }
1281 break;
1282
1283 case -ESHUTDOWN:
1284 /* disconnect */
1285 gs_debug("gs_read_complete: shutdown\n");
1286 gs_free_req(ep, req);
1287 break;
1288
1289 default:
1290 /* unexpected */
1291 printk(KERN_ERR
1292 "gs_read_complete: unexpected status error, status=%d\n",
1293 req->status);
1294 goto requeue;
1295 break;
1296 }
1297 }
1298
1299 /*
1300 * gs_write_complete
1301 */
1302 static void gs_write_complete(struct usb_ep *ep, struct usb_request *req)
1303 {
1304 struct gs_dev *dev = ep->driver_data;
1305 struct gs_req_entry *gs_req = req->context;
1306
1307 if (dev == NULL) {
1308 printk(KERN_ERR "gs_write_complete: NULL device pointer\n");
1309 return;
1310 }
1311
1312 switch(req->status) {
1313 case 0:
1314 /* normal completion */
1315 requeue:
1316 if (gs_req == NULL) {
1317 printk(KERN_ERR
1318 "gs_write_complete: NULL request pointer\n");
1319 return;
1320 }
1321
1322 spin_lock(&dev->dev_lock);
1323 list_add(&gs_req->re_entry, &dev->dev_req_list);
1324 spin_unlock(&dev->dev_lock);
1325
1326 gs_send(dev);
1327
1328 break;
1329
1330 case -ESHUTDOWN:
1331 /* disconnect */
1332 gs_debug("gs_write_complete: shutdown\n");
1333 gs_free_req(ep, req);
1334 break;
1335
1336 default:
1337 printk(KERN_ERR
1338 "gs_write_complete: unexpected status error, status=%d\n",
1339 req->status);
1340 goto requeue;
1341 break;
1342 }
1343 }
1344
1345 /* Gadget Driver */
1346
1347 /*
1348 * gs_bind
1349 *
1350 * Called on module load. Allocates and initializes the device
1351 * structure and a control request.
1352 */
1353 static int __init gs_bind(struct usb_gadget *gadget)
1354 {
1355 int ret;
1356 struct usb_ep *ep;
1357 struct gs_dev *dev;
1358 int gcnum;
1359
1360 /* Some controllers can't support CDC ACM:
1361 * - sh doesn't support multiple interfaces or configs;
1362 * - sa1100 doesn't have a third interrupt endpoint
1363 */
1364 if (gadget_is_sh(gadget) || gadget_is_sa1100(gadget))
1365 use_acm = 0;
1366
1367 gcnum = usb_gadget_controller_number(gadget);
1368 if (gcnum >= 0)
1369 gs_device_desc.bcdDevice =
1370 cpu_to_le16(GS_VERSION_NUM | gcnum);
1371 else {
1372 printk(KERN_WARNING "gs_bind: controller '%s' not recognized\n",
1373 gadget->name);
1374 /* unrecognized, but safe unless bulk is REALLY quirky */
1375 gs_device_desc.bcdDevice =
1376 __constant_cpu_to_le16(GS_VERSION_NUM|0x0099);
1377 }
1378
1379 usb_ep_autoconfig_reset(gadget);
1380
1381 ep = usb_ep_autoconfig(gadget, &gs_fullspeed_in_desc);
1382 if (!ep)
1383 goto autoconf_fail;
1384 EP_IN_NAME = ep->name;
1385 ep->driver_data = ep; /* claim the endpoint */
1386
1387 ep = usb_ep_autoconfig(gadget, &gs_fullspeed_out_desc);
1388 if (!ep)
1389 goto autoconf_fail;
1390 EP_OUT_NAME = ep->name;
1391 ep->driver_data = ep; /* claim the endpoint */
1392
1393 if (use_acm) {
1394 ep = usb_ep_autoconfig(gadget, &gs_fullspeed_notify_desc);
1395 if (!ep) {
1396 printk(KERN_ERR "gs_bind: cannot run ACM on %s\n", gadget->name);
1397 goto autoconf_fail;
1398 }
1399 gs_device_desc.idProduct = __constant_cpu_to_le16(
1400 GS_CDC_PRODUCT_ID),
1401 EP_NOTIFY_NAME = ep->name;
1402 ep->driver_data = ep; /* claim the endpoint */
1403 }
1404
1405 gs_device_desc.bDeviceClass = use_acm
1406 ? USB_CLASS_COMM : USB_CLASS_VENDOR_SPEC;
1407 gs_device_desc.bMaxPacketSize0 = gadget->ep0->maxpacket;
1408
1409 #ifdef CONFIG_USB_GADGET_DUALSPEED
1410 gs_qualifier_desc.bDeviceClass = use_acm
1411 ? USB_CLASS_COMM : USB_CLASS_VENDOR_SPEC;
1412 /* assume ep0 uses the same packet size for both speeds */
1413 gs_qualifier_desc.bMaxPacketSize0 = gs_device_desc.bMaxPacketSize0;
1414 /* assume endpoints are dual-speed */
1415 gs_highspeed_notify_desc.bEndpointAddress =
1416 gs_fullspeed_notify_desc.bEndpointAddress;
1417 gs_highspeed_in_desc.bEndpointAddress =
1418 gs_fullspeed_in_desc.bEndpointAddress;
1419 gs_highspeed_out_desc.bEndpointAddress =
1420 gs_fullspeed_out_desc.bEndpointAddress;
1421 #endif /* CONFIG_USB_GADGET_DUALSPEED */
1422
1423 usb_gadget_set_selfpowered(gadget);
1424
1425 if (gadget->is_otg) {
1426 gs_otg_descriptor.bmAttributes |= USB_OTG_HNP,
1427 gs_bulk_config_desc.bmAttributes |= USB_CONFIG_ATT_WAKEUP;
1428 gs_acm_config_desc.bmAttributes |= USB_CONFIG_ATT_WAKEUP;
1429 }
1430
1431 gs_device = dev = kmalloc(sizeof(struct gs_dev), GFP_KERNEL);
1432 if (dev == NULL)
1433 return -ENOMEM;
1434
1435 snprintf(manufacturer, sizeof(manufacturer), "%s %s with %s",
1436 init_utsname()->sysname, init_utsname()->release,
1437 gadget->name);
1438
1439 memset(dev, 0, sizeof(struct gs_dev));
1440 dev->dev_gadget = gadget;
1441 spin_lock_init(&dev->dev_lock);
1442 INIT_LIST_HEAD(&dev->dev_req_list);
1443 set_gadget_data(gadget, dev);
1444
1445 if ((ret=gs_alloc_ports(dev, GFP_KERNEL)) != 0) {
1446 printk(KERN_ERR "gs_bind: cannot allocate ports\n");
1447 gs_unbind(gadget);
1448 return ret;
1449 }
1450
1451 /* preallocate control response and buffer */
1452 dev->dev_ctrl_req = gs_alloc_req(gadget->ep0, GS_MAX_DESC_LEN,
1453 GFP_KERNEL);
1454 if (dev->dev_ctrl_req == NULL) {
1455 gs_unbind(gadget);
1456 return -ENOMEM;
1457 }
1458 dev->dev_ctrl_req->complete = gs_setup_complete;
1459
1460 gadget->ep0->driver_data = dev;
1461
1462 printk(KERN_INFO "gs_bind: %s %s bound\n",
1463 GS_LONG_NAME, GS_VERSION_STR);
1464
1465 return 0;
1466
1467 autoconf_fail:
1468 printk(KERN_ERR "gs_bind: cannot autoconfigure on %s\n", gadget->name);
1469 return -ENODEV;
1470 }
1471
1472 /*
1473 * gs_unbind
1474 *
1475 * Called on module unload. Frees the control request and device
1476 * structure.
1477 */
1478 static void /* __init_or_exit */ gs_unbind(struct usb_gadget *gadget)
1479 {
1480 struct gs_dev *dev = get_gadget_data(gadget);
1481
1482 gs_device = NULL;
1483
1484 /* read/write requests already freed, only control request remains */
1485 if (dev != NULL) {
1486 if (dev->dev_ctrl_req != NULL) {
1487 gs_free_req(gadget->ep0, dev->dev_ctrl_req);
1488 dev->dev_ctrl_req = NULL;
1489 }
1490 gs_free_ports(dev);
1491 kfree(dev);
1492 set_gadget_data(gadget, NULL);
1493 }
1494
1495 printk(KERN_INFO "gs_unbind: %s %s unbound\n", GS_LONG_NAME,
1496 GS_VERSION_STR);
1497 }
1498
1499 /*
1500 * gs_setup
1501 *
1502 * Implements all the control endpoint functionality that's not
1503 * handled in hardware or the hardware driver.
1504 *
1505 * Returns the size of the data sent to the host, or a negative
1506 * error number.
1507 */
1508 static int gs_setup(struct usb_gadget *gadget,
1509 const struct usb_ctrlrequest *ctrl)
1510 {
1511 int ret = -EOPNOTSUPP;
1512 struct gs_dev *dev = get_gadget_data(gadget);
1513 struct usb_request *req = dev->dev_ctrl_req;
1514 u16 wIndex = le16_to_cpu(ctrl->wIndex);
1515 u16 wValue = le16_to_cpu(ctrl->wValue);
1516 u16 wLength = le16_to_cpu(ctrl->wLength);
1517
1518 switch (ctrl->bRequestType & USB_TYPE_MASK) {
1519 case USB_TYPE_STANDARD:
1520 ret = gs_setup_standard(gadget,ctrl);
1521 break;
1522
1523 case USB_TYPE_CLASS:
1524 ret = gs_setup_class(gadget,ctrl);
1525 break;
1526
1527 default:
1528 printk(KERN_ERR "gs_setup: unknown request, type=%02x, request=%02x, value=%04x, index=%04x, length=%d\n",
1529 ctrl->bRequestType, ctrl->bRequest,
1530 wValue, wIndex, wLength);
1531 break;
1532 }
1533
1534 /* respond with data transfer before status phase? */
1535 if (ret >= 0) {
1536 req->length = ret;
1537 req->zero = ret < wLength
1538 && (ret % gadget->ep0->maxpacket) == 0;
1539 ret = usb_ep_queue(gadget->ep0, req, GFP_ATOMIC);
1540 if (ret < 0) {
1541 printk(KERN_ERR "gs_setup: cannot queue response, ret=%d\n",
1542 ret);
1543 req->status = 0;
1544 gs_setup_complete(gadget->ep0, req);
1545 }
1546 }
1547
1548 /* device either stalls (ret < 0) or reports success */
1549 return ret;
1550 }
1551
1552 static int gs_setup_standard(struct usb_gadget *gadget,
1553 const struct usb_ctrlrequest *ctrl)
1554 {
1555 int ret = -EOPNOTSUPP;
1556 struct gs_dev *dev = get_gadget_data(gadget);
1557 struct usb_request *req = dev->dev_ctrl_req;
1558 u16 wIndex = le16_to_cpu(ctrl->wIndex);
1559 u16 wValue = le16_to_cpu(ctrl->wValue);
1560 u16 wLength = le16_to_cpu(ctrl->wLength);
1561
1562 switch (ctrl->bRequest) {
1563 case USB_REQ_GET_DESCRIPTOR:
1564 if (ctrl->bRequestType != USB_DIR_IN)
1565 break;
1566
1567 switch (wValue >> 8) {
1568 case USB_DT_DEVICE:
1569 ret = min(wLength,
1570 (u16)sizeof(struct usb_device_descriptor));
1571 memcpy(req->buf, &gs_device_desc, ret);
1572 break;
1573
1574 #ifdef CONFIG_USB_GADGET_DUALSPEED
1575 case USB_DT_DEVICE_QUALIFIER:
1576 if (!gadget->is_dualspeed)
1577 break;
1578 ret = min(wLength,
1579 (u16)sizeof(struct usb_qualifier_descriptor));
1580 memcpy(req->buf, &gs_qualifier_desc, ret);
1581 break;
1582
1583 case USB_DT_OTHER_SPEED_CONFIG:
1584 if (!gadget->is_dualspeed)
1585 break;
1586 /* fall through */
1587 #endif /* CONFIG_USB_GADGET_DUALSPEED */
1588 case USB_DT_CONFIG:
1589 ret = gs_build_config_buf(req->buf, gadget->speed,
1590 wValue >> 8, wValue & 0xff,
1591 gadget->is_otg);
1592 if (ret >= 0)
1593 ret = min(wLength, (u16)ret);
1594 break;
1595
1596 case USB_DT_STRING:
1597 /* wIndex == language code. */
1598 ret = usb_gadget_get_string(&gs_string_table,
1599 wValue & 0xff, req->buf);
1600 if (ret >= 0)
1601 ret = min(wLength, (u16)ret);
1602 break;
1603 }
1604 break;
1605
1606 case USB_REQ_SET_CONFIGURATION:
1607 if (ctrl->bRequestType != 0)
1608 break;
1609 spin_lock(&dev->dev_lock);
1610 ret = gs_set_config(dev, wValue);
1611 spin_unlock(&dev->dev_lock);
1612 break;
1613
1614 case USB_REQ_GET_CONFIGURATION:
1615 if (ctrl->bRequestType != USB_DIR_IN)
1616 break;
1617 *(u8 *)req->buf = dev->dev_config;
1618 ret = min(wLength, (u16)1);
1619 break;
1620
1621 case USB_REQ_SET_INTERFACE:
1622 if (ctrl->bRequestType != USB_RECIP_INTERFACE
1623 || !dev->dev_config
1624 || wIndex >= GS_MAX_NUM_INTERFACES)
1625 break;
1626 if (dev->dev_config == GS_BULK_CONFIG_ID
1627 && wIndex != GS_BULK_INTERFACE_ID)
1628 break;
1629 /* no alternate interface settings */
1630 if (wValue != 0)
1631 break;
1632 spin_lock(&dev->dev_lock);
1633 /* PXA hardware partially handles SET_INTERFACE;
1634 * we need to kluge around that interference. */
1635 if (gadget_is_pxa(gadget)) {
1636 ret = gs_set_config(dev, use_acm ?
1637 GS_ACM_CONFIG_ID : GS_BULK_CONFIG_ID);
1638 goto set_interface_done;
1639 }
1640 if (dev->dev_config != GS_BULK_CONFIG_ID
1641 && wIndex == GS_CONTROL_INTERFACE_ID) {
1642 if (dev->dev_notify_ep) {
1643 usb_ep_disable(dev->dev_notify_ep);
1644 usb_ep_enable(dev->dev_notify_ep, dev->dev_notify_ep_desc);
1645 }
1646 } else {
1647 usb_ep_disable(dev->dev_in_ep);
1648 usb_ep_disable(dev->dev_out_ep);
1649 usb_ep_enable(dev->dev_in_ep, dev->dev_in_ep_desc);
1650 usb_ep_enable(dev->dev_out_ep, dev->dev_out_ep_desc);
1651 }
1652 ret = 0;
1653 set_interface_done:
1654 spin_unlock(&dev->dev_lock);
1655 break;
1656
1657 case USB_REQ_GET_INTERFACE:
1658 if (ctrl->bRequestType != (USB_DIR_IN|USB_RECIP_INTERFACE)
1659 || dev->dev_config == GS_NO_CONFIG_ID)
1660 break;
1661 if (wIndex >= GS_MAX_NUM_INTERFACES
1662 || (dev->dev_config == GS_BULK_CONFIG_ID
1663 && wIndex != GS_BULK_INTERFACE_ID)) {
1664 ret = -EDOM;
1665 break;
1666 }
1667 /* no alternate interface settings */
1668 *(u8 *)req->buf = 0;
1669 ret = min(wLength, (u16)1);
1670 break;
1671
1672 default:
1673 printk(KERN_ERR "gs_setup: unknown standard request, type=%02x, request=%02x, value=%04x, index=%04x, length=%d\n",
1674 ctrl->bRequestType, ctrl->bRequest,
1675 wValue, wIndex, wLength);
1676 break;
1677 }
1678
1679 return ret;
1680 }
1681
1682 static int gs_setup_class(struct usb_gadget *gadget,
1683 const struct usb_ctrlrequest *ctrl)
1684 {
1685 int ret = -EOPNOTSUPP;
1686 struct gs_dev *dev = get_gadget_data(gadget);
1687 struct gs_port *port = dev->dev_port[0]; /* ACM only has one port */
1688 struct usb_request *req = dev->dev_ctrl_req;
1689 u16 wIndex = le16_to_cpu(ctrl->wIndex);
1690 u16 wValue = le16_to_cpu(ctrl->wValue);
1691 u16 wLength = le16_to_cpu(ctrl->wLength);
1692
1693 switch (ctrl->bRequest) {
1694 case USB_CDC_REQ_SET_LINE_CODING:
1695 ret = min(wLength,
1696 (u16)sizeof(struct usb_cdc_line_coding));
1697 if (port) {
1698 spin_lock(&port->port_lock);
1699 memcpy(&port->port_line_coding, req->buf, ret);
1700 spin_unlock(&port->port_lock);
1701 }
1702 ret = 0;
1703 break;
1704
1705 case USB_CDC_REQ_GET_LINE_CODING:
1706 port = dev->dev_port[0]; /* ACM only has one port */
1707 ret = min(wLength,
1708 (u16)sizeof(struct usb_cdc_line_coding));
1709 if (port) {
1710 spin_lock(&port->port_lock);
1711 memcpy(req->buf, &port->port_line_coding, ret);
1712 spin_unlock(&port->port_lock);
1713 }
1714 break;
1715
1716 case USB_CDC_REQ_SET_CONTROL_LINE_STATE:
1717 ret = 0;
1718 break;
1719
1720 default:
1721 printk(KERN_ERR "gs_setup: unknown class request, type=%02x, request=%02x, value=%04x, index=%04x, length=%d\n",
1722 ctrl->bRequestType, ctrl->bRequest,
1723 wValue, wIndex, wLength);
1724 break;
1725 }
1726
1727 return ret;
1728 }
1729
1730 /*
1731 * gs_setup_complete
1732 */
1733 static void gs_setup_complete(struct usb_ep *ep, struct usb_request *req)
1734 {
1735 if (req->status || req->actual != req->length) {
1736 printk(KERN_ERR "gs_setup_complete: status error, status=%d, actual=%d, length=%d\n",
1737 req->status, req->actual, req->length);
1738 }
1739 }
1740
1741 /*
1742 * gs_disconnect
1743 *
1744 * Called when the device is disconnected. Frees the closed
1745 * ports and disconnects open ports. Open ports will be freed
1746 * on close. Then reallocates the ports for the next connection.
1747 */
1748 static void gs_disconnect(struct usb_gadget *gadget)
1749 {
1750 unsigned long flags;
1751 struct gs_dev *dev = get_gadget_data(gadget);
1752
1753 spin_lock_irqsave(&dev->dev_lock, flags);
1754
1755 gs_reset_config(dev);
1756
1757 /* free closed ports and disconnect open ports */
1758 /* (open ports will be freed when closed) */
1759 gs_free_ports(dev);
1760
1761 /* re-allocate ports for the next connection */
1762 if (gs_alloc_ports(dev, GFP_ATOMIC) != 0)
1763 printk(KERN_ERR "gs_disconnect: cannot re-allocate ports\n");
1764
1765 spin_unlock_irqrestore(&dev->dev_lock, flags);
1766
1767 printk(KERN_INFO "gs_disconnect: %s disconnected\n", GS_LONG_NAME);
1768 }
1769
1770 /*
1771 * gs_set_config
1772 *
1773 * Configures the device by enabling device specific
1774 * optimizations, setting up the endpoints, allocating
1775 * read and write requests and queuing read requests.
1776 *
1777 * The device lock must be held when calling this function.
1778 */
1779 static int gs_set_config(struct gs_dev *dev, unsigned config)
1780 {
1781 int i;
1782 int ret = 0;
1783 struct usb_gadget *gadget = dev->dev_gadget;
1784 struct usb_ep *ep;
1785 struct usb_endpoint_descriptor *ep_desc;
1786 struct usb_request *req;
1787 struct gs_req_entry *req_entry;
1788
1789 if (dev == NULL) {
1790 printk(KERN_ERR "gs_set_config: NULL device pointer\n");
1791 return 0;
1792 }
1793
1794 if (config == dev->dev_config)
1795 return 0;
1796
1797 gs_reset_config(dev);
1798
1799 switch (config) {
1800 case GS_NO_CONFIG_ID:
1801 return 0;
1802 case GS_BULK_CONFIG_ID:
1803 if (use_acm)
1804 return -EINVAL;
1805 /* device specific optimizations */
1806 if (gadget_is_net2280(gadget))
1807 net2280_set_fifo_mode(gadget, 1);
1808 break;
1809 case GS_ACM_CONFIG_ID:
1810 if (!use_acm)
1811 return -EINVAL;
1812 /* device specific optimizations */
1813 if (gadget_is_net2280(gadget))
1814 net2280_set_fifo_mode(gadget, 1);
1815 break;
1816 default:
1817 return -EINVAL;
1818 }
1819
1820 dev->dev_config = config;
1821
1822 gadget_for_each_ep(ep, gadget) {
1823
1824 if (EP_NOTIFY_NAME
1825 && strcmp(ep->name, EP_NOTIFY_NAME) == 0) {
1826 ep_desc = GS_SPEED_SELECT(
1827 gadget->speed == USB_SPEED_HIGH,
1828 &gs_highspeed_notify_desc,
1829 &gs_fullspeed_notify_desc);
1830 ret = usb_ep_enable(ep,ep_desc);
1831 if (ret == 0) {
1832 ep->driver_data = dev;
1833 dev->dev_notify_ep = ep;
1834 dev->dev_notify_ep_desc = ep_desc;
1835 } else {
1836 printk(KERN_ERR "gs_set_config: cannot enable notify endpoint %s, ret=%d\n",
1837 ep->name, ret);
1838 goto exit_reset_config;
1839 }
1840 }
1841
1842 else if (strcmp(ep->name, EP_IN_NAME) == 0) {
1843 ep_desc = GS_SPEED_SELECT(
1844 gadget->speed == USB_SPEED_HIGH,
1845 &gs_highspeed_in_desc,
1846 &gs_fullspeed_in_desc);
1847 ret = usb_ep_enable(ep,ep_desc);
1848 if (ret == 0) {
1849 ep->driver_data = dev;
1850 dev->dev_in_ep = ep;
1851 dev->dev_in_ep_desc = ep_desc;
1852 } else {
1853 printk(KERN_ERR "gs_set_config: cannot enable in endpoint %s, ret=%d\n",
1854 ep->name, ret);
1855 goto exit_reset_config;
1856 }
1857 }
1858
1859 else if (strcmp(ep->name, EP_OUT_NAME) == 0) {
1860 ep_desc = GS_SPEED_SELECT(
1861 gadget->speed == USB_SPEED_HIGH,
1862 &gs_highspeed_out_desc,
1863 &gs_fullspeed_out_desc);
1864 ret = usb_ep_enable(ep,ep_desc);
1865 if (ret == 0) {
1866 ep->driver_data = dev;
1867 dev->dev_out_ep = ep;
1868 dev->dev_out_ep_desc = ep_desc;
1869 } else {
1870 printk(KERN_ERR "gs_set_config: cannot enable out endpoint %s, ret=%d\n",
1871 ep->name, ret);
1872 goto exit_reset_config;
1873 }
1874 }
1875
1876 }
1877
1878 if (dev->dev_in_ep == NULL || dev->dev_out_ep == NULL
1879 || (config != GS_BULK_CONFIG_ID && dev->dev_notify_ep == NULL)) {
1880 printk(KERN_ERR "gs_set_config: cannot find endpoints\n");
1881 ret = -ENODEV;
1882 goto exit_reset_config;
1883 }
1884
1885 /* allocate and queue read requests */
1886 ep = dev->dev_out_ep;
1887 for (i=0; i<read_q_size && ret == 0; i++) {
1888 if ((req=gs_alloc_req(ep, ep->maxpacket, GFP_ATOMIC))) {
1889 req->complete = gs_read_complete;
1890 if ((ret=usb_ep_queue(ep, req, GFP_ATOMIC))) {
1891 printk(KERN_ERR "gs_set_config: cannot queue read request, ret=%d\n",
1892 ret);
1893 }
1894 } else {
1895 printk(KERN_ERR "gs_set_config: cannot allocate read requests\n");
1896 ret = -ENOMEM;
1897 goto exit_reset_config;
1898 }
1899 }
1900
1901 /* allocate write requests, and put on free list */
1902 ep = dev->dev_in_ep;
1903 for (i=0; i<write_q_size; i++) {
1904 if ((req_entry=gs_alloc_req_entry(ep, ep->maxpacket, GFP_ATOMIC))) {
1905 req_entry->re_req->complete = gs_write_complete;
1906 list_add(&req_entry->re_entry, &dev->dev_req_list);
1907 } else {
1908 printk(KERN_ERR "gs_set_config: cannot allocate write requests\n");
1909 ret = -ENOMEM;
1910 goto exit_reset_config;
1911 }
1912 }
1913
1914 printk(KERN_INFO "gs_set_config: %s configured, %s speed %s config\n",
1915 GS_LONG_NAME,
1916 gadget->speed == USB_SPEED_HIGH ? "high" : "full",
1917 config == GS_BULK_CONFIG_ID ? "BULK" : "CDC-ACM");
1918
1919 return 0;
1920
1921 exit_reset_config:
1922 gs_reset_config(dev);
1923 return ret;
1924 }
1925
1926 /*
1927 * gs_reset_config
1928 *
1929 * Mark the device as not configured, disable all endpoints,
1930 * which forces completion of pending I/O and frees queued
1931 * requests, and free the remaining write requests on the
1932 * free list.
1933 *
1934 * The device lock must be held when calling this function.
1935 */
1936 static void gs_reset_config(struct gs_dev *dev)
1937 {
1938 struct gs_req_entry *req_entry;
1939
1940 if (dev == NULL) {
1941 printk(KERN_ERR "gs_reset_config: NULL device pointer\n");
1942 return;
1943 }
1944
1945 if (dev->dev_config == GS_NO_CONFIG_ID)
1946 return;
1947
1948 dev->dev_config = GS_NO_CONFIG_ID;
1949
1950 /* free write requests on the free list */
1951 while(!list_empty(&dev->dev_req_list)) {
1952 req_entry = list_entry(dev->dev_req_list.next,
1953 struct gs_req_entry, re_entry);
1954 list_del(&req_entry->re_entry);
1955 gs_free_req_entry(dev->dev_in_ep, req_entry);
1956 }
1957
1958 /* disable endpoints, forcing completion of pending i/o; */
1959 /* completion handlers free their requests in this case */
1960 if (dev->dev_notify_ep) {
1961 usb_ep_disable(dev->dev_notify_ep);
1962 dev->dev_notify_ep = NULL;
1963 }
1964 if (dev->dev_in_ep) {
1965 usb_ep_disable(dev->dev_in_ep);
1966 dev->dev_in_ep = NULL;
1967 }
1968 if (dev->dev_out_ep) {
1969 usb_ep_disable(dev->dev_out_ep);
1970 dev->dev_out_ep = NULL;
1971 }
1972 }
1973
1974 /*
1975 * gs_build_config_buf
1976 *
1977 * Builds the config descriptors in the given buffer and returns the
1978 * length, or a negative error number.
1979 */
1980 static int gs_build_config_buf(u8 *buf, enum usb_device_speed speed,
1981 u8 type, unsigned int index, int is_otg)
1982 {
1983 int len;
1984 int high_speed;
1985 const struct usb_config_descriptor *config_desc;
1986 const struct usb_descriptor_header **function;
1987
1988 if (index >= gs_device_desc.bNumConfigurations)
1989 return -EINVAL;
1990
1991 /* other speed switches high and full speed */
1992 high_speed = (speed == USB_SPEED_HIGH);
1993 if (type == USB_DT_OTHER_SPEED_CONFIG)
1994 high_speed = !high_speed;
1995
1996 if (use_acm) {
1997 config_desc = &gs_acm_config_desc;
1998 function = GS_SPEED_SELECT(high_speed,
1999 gs_acm_highspeed_function,
2000 gs_acm_fullspeed_function);
2001 } else {
2002 config_desc = &gs_bulk_config_desc;
2003 function = GS_SPEED_SELECT(high_speed,
2004 gs_bulk_highspeed_function,
2005 gs_bulk_fullspeed_function);
2006 }
2007
2008 /* for now, don't advertise srp-only devices */
2009 if (!is_otg)
2010 function++;
2011
2012 len = usb_gadget_config_buf(config_desc, buf, GS_MAX_DESC_LEN, function);
2013 if (len < 0)
2014 return len;
2015
2016 ((struct usb_config_descriptor *)buf)->bDescriptorType = type;
2017
2018 return len;
2019 }
2020
2021 /*
2022 * gs_alloc_req
2023 *
2024 * Allocate a usb_request and its buffer. Returns a pointer to the
2025 * usb_request or NULL if there is an error.
2026 */
2027 static struct usb_request *
2028 gs_alloc_req(struct usb_ep *ep, unsigned int len, gfp_t kmalloc_flags)
2029 {
2030 struct usb_request *req;
2031
2032 if (ep == NULL)
2033 return NULL;
2034
2035 req = usb_ep_alloc_request(ep, kmalloc_flags);
2036
2037 if (req != NULL) {
2038 req->length = len;
2039 req->buf = kmalloc(len, kmalloc_flags);
2040 if (req->buf == NULL) {
2041 usb_ep_free_request(ep, req);
2042 return NULL;
2043 }
2044 }
2045
2046 return req;
2047 }
2048
2049 /*
2050 * gs_free_req
2051 *
2052 * Free a usb_request and its buffer.
2053 */
2054 static void gs_free_req(struct usb_ep *ep, struct usb_request *req)
2055 {
2056 if (ep != NULL && req != NULL) {
2057 kfree(req->buf);
2058 usb_ep_free_request(ep, req);
2059 }
2060 }
2061
2062 /*
2063 * gs_alloc_req_entry
2064 *
2065 * Allocates a request and its buffer, using the given
2066 * endpoint, buffer len, and kmalloc flags.
2067 */
2068 static struct gs_req_entry *
2069 gs_alloc_req_entry(struct usb_ep *ep, unsigned len, gfp_t kmalloc_flags)
2070 {
2071 struct gs_req_entry *req;
2072
2073 req = kmalloc(sizeof(struct gs_req_entry), kmalloc_flags);
2074 if (req == NULL)
2075 return NULL;
2076
2077 req->re_req = gs_alloc_req(ep, len, kmalloc_flags);
2078 if (req->re_req == NULL) {
2079 kfree(req);
2080 return NULL;
2081 }
2082
2083 req->re_req->context = req;
2084
2085 return req;
2086 }
2087
2088 /*
2089 * gs_free_req_entry
2090 *
2091 * Frees a request and its buffer.
2092 */
2093 static void gs_free_req_entry(struct usb_ep *ep, struct gs_req_entry *req)
2094 {
2095 if (ep != NULL && req != NULL) {
2096 if (req->re_req != NULL)
2097 gs_free_req(ep, req->re_req);
2098 kfree(req);
2099 }
2100 }
2101
2102 /*
2103 * gs_alloc_ports
2104 *
2105 * Allocate all ports and set the gs_dev struct to point to them.
2106 * Return 0 if successful, or a negative error number.
2107 *
2108 * The device lock is normally held when calling this function.
2109 */
2110 static int gs_alloc_ports(struct gs_dev *dev, gfp_t kmalloc_flags)
2111 {
2112 int i;
2113 struct gs_port *port;
2114
2115 if (dev == NULL)
2116 return -EIO;
2117
2118 for (i=0; i<GS_NUM_PORTS; i++) {
2119 if ((port=kzalloc(sizeof(struct gs_port), kmalloc_flags)) == NULL)
2120 return -ENOMEM;
2121
2122 port->port_dev = dev;
2123 port->port_num = i;
2124 port->port_line_coding.dwDTERate = cpu_to_le32(GS_DEFAULT_DTE_RATE);
2125 port->port_line_coding.bCharFormat = GS_DEFAULT_CHAR_FORMAT;
2126 port->port_line_coding.bParityType = GS_DEFAULT_PARITY;
2127 port->port_line_coding.bDataBits = GS_DEFAULT_DATA_BITS;
2128 spin_lock_init(&port->port_lock);
2129 init_waitqueue_head(&port->port_write_wait);
2130
2131 dev->dev_port[i] = port;
2132 }
2133
2134 return 0;
2135 }
2136
2137 /*
2138 * gs_free_ports
2139 *
2140 * Free all closed ports. Open ports are disconnected by
2141 * freeing their write buffers, setting their device pointers
2142 * and the pointers to them in the device to NULL. These
2143 * ports will be freed when closed.
2144 *
2145 * The device lock is normally held when calling this function.
2146 */
2147 static void gs_free_ports(struct gs_dev *dev)
2148 {
2149 int i;
2150 unsigned long flags;
2151 struct gs_port *port;
2152
2153 if (dev == NULL)
2154 return;
2155
2156 for (i=0; i<GS_NUM_PORTS; i++) {
2157 if ((port=dev->dev_port[i]) != NULL) {
2158 dev->dev_port[i] = NULL;
2159
2160 spin_lock_irqsave(&port->port_lock, flags);
2161
2162 if (port->port_write_buf != NULL) {
2163 gs_buf_free(port->port_write_buf);
2164 port->port_write_buf = NULL;
2165 }
2166
2167 if (port->port_open_count > 0 || port->port_in_use) {
2168 port->port_dev = NULL;
2169 wake_up_interruptible(&port->port_write_wait);
2170 if (port->port_tty) {
2171 wake_up_interruptible(&port->port_tty->read_wait);
2172 wake_up_interruptible(&port->port_tty->write_wait);
2173 }
2174 spin_unlock_irqrestore(&port->port_lock, flags);
2175 } else {
2176 spin_unlock_irqrestore(&port->port_lock, flags);
2177 kfree(port);
2178 }
2179
2180 }
2181 }
2182 }
2183
2184 /* Circular Buffer */
2185
2186 /*
2187 * gs_buf_alloc
2188 *
2189 * Allocate a circular buffer and all associated memory.
2190 */
2191 static struct gs_buf *gs_buf_alloc(unsigned int size, gfp_t kmalloc_flags)
2192 {
2193 struct gs_buf *gb;
2194
2195 if (size == 0)
2196 return NULL;
2197
2198 gb = kmalloc(sizeof(struct gs_buf), kmalloc_flags);
2199 if (gb == NULL)
2200 return NULL;
2201
2202 gb->buf_buf = kmalloc(size, kmalloc_flags);
2203 if (gb->buf_buf == NULL) {
2204 kfree(gb);
2205 return NULL;
2206 }
2207
2208 gb->buf_size = size;
2209 gb->buf_get = gb->buf_put = gb->buf_buf;
2210
2211 return gb;
2212 }
2213
2214 /*
2215 * gs_buf_free
2216 *
2217 * Free the buffer and all associated memory.
2218 */
2219 void gs_buf_free(struct gs_buf *gb)
2220 {
2221 if (gb) {
2222 kfree(gb->buf_buf);
2223 kfree(gb);
2224 }
2225 }
2226
2227 /*
2228 * gs_buf_clear
2229 *
2230 * Clear out all data in the circular buffer.
2231 */
2232 void gs_buf_clear(struct gs_buf *gb)
2233 {
2234 if (gb != NULL)
2235 gb->buf_get = gb->buf_put;
2236 /* equivalent to a get of all data available */
2237 }
2238
2239 /*
2240 * gs_buf_data_avail
2241 *
2242 * Return the number of bytes of data available in the circular
2243 * buffer.
2244 */
2245 unsigned int gs_buf_data_avail(struct gs_buf *gb)
2246 {
2247 if (gb != NULL)
2248 return (gb->buf_size + gb->buf_put - gb->buf_get) % gb->buf_size;
2249 else
2250 return 0;
2251 }
2252
2253 /*
2254 * gs_buf_space_avail
2255 *
2256 * Return the number of bytes of space available in the circular
2257 * buffer.
2258 */
2259 unsigned int gs_buf_space_avail(struct gs_buf *gb)
2260 {
2261 if (gb != NULL)
2262 return (gb->buf_size + gb->buf_get - gb->buf_put - 1) % gb->buf_size;
2263 else
2264 return 0;
2265 }
2266
2267 /*
2268 * gs_buf_put
2269 *
2270 * Copy data data from a user buffer and put it into the circular buffer.
2271 * Restrict to the amount of space available.
2272 *
2273 * Return the number of bytes copied.
2274 */
2275 unsigned int gs_buf_put(struct gs_buf *gb, const char *buf, unsigned int count)
2276 {
2277 unsigned int len;
2278
2279 if (gb == NULL)
2280 return 0;
2281
2282 len = gs_buf_space_avail(gb);
2283 if (count > len)
2284 count = len;
2285
2286 if (count == 0)
2287 return 0;
2288
2289 len = gb->buf_buf + gb->buf_size - gb->buf_put;
2290 if (count > len) {
2291 memcpy(gb->buf_put, buf, len);
2292 memcpy(gb->buf_buf, buf+len, count - len);
2293 gb->buf_put = gb->buf_buf + count - len;
2294 } else {
2295 memcpy(gb->buf_put, buf, count);
2296 if (count < len)
2297 gb->buf_put += count;
2298 else /* count == len */
2299 gb->buf_put = gb->buf_buf;
2300 }
2301
2302 return count;
2303 }
2304
2305 /*
2306 * gs_buf_get
2307 *
2308 * Get data from the circular buffer and copy to the given buffer.
2309 * Restrict to the amount of data available.
2310 *
2311 * Return the number of bytes copied.
2312 */
2313 unsigned int gs_buf_get(struct gs_buf *gb, char *buf, unsigned int count)
2314 {
2315 unsigned int len;
2316
2317 if (gb == NULL)
2318 return 0;
2319
2320 len = gs_buf_data_avail(gb);
2321 if (count > len)
2322 count = len;
2323
2324 if (count == 0)
2325 return 0;
2326
2327 len = gb->buf_buf + gb->buf_size - gb->buf_get;
2328 if (count > len) {
2329 memcpy(buf, gb->buf_get, len);
2330 memcpy(buf+len, gb->buf_buf, count - len);
2331 gb->buf_get = gb->buf_buf + count - len;
2332 } else {
2333 memcpy(buf, gb->buf_get, count);
2334 if (count < len)
2335 gb->buf_get += count;
2336 else /* count == len */
2337 gb->buf_get = gb->buf_buf;
2338 }
2339
2340 return count;
2341 }
Community contributions to the Openmoko Kernel