[PATCH] dpt_i2o fix for deadlock condition
[linux-2.6/openmoko-kernel/knife-kernel.git] / include / linux / mc146818rtc.h
blobbbc93ae217e1c48390bb5352d6e76a59e5efb5d4
1 /* mc146818rtc.h - register definitions for the Real-Time-Clock / CMOS RAM
2 * Copyright Torsten Duwe <duwe@informatik.uni-erlangen.de> 1993
3 * derived from Data Sheet, Copyright Motorola 1984 (!).
4 * It was written to be part of the Linux operating system.
5 */
6 /* permission is hereby granted to copy, modify and redistribute this code
7 * in terms of the GNU Library General Public License, Version 2 or later,
8 * at your option.
9 */
11 #ifndef _MC146818RTC_H
12 #define _MC146818RTC_H
14 #include <asm/io.h>
15 #include <linux/rtc.h> /* get the user-level API */
16 #include <asm/mc146818rtc.h> /* register access macros */
18 #ifdef __KERNEL__
19 #include <linux/spinlock.h> /* spinlock_t */
20 extern spinlock_t rtc_lock; /* serialize CMOS RAM access */
21 #endif
23 /**********************************************************************
24 * register summary
25 **********************************************************************/
26 #define RTC_SECONDS 0
27 #define RTC_SECONDS_ALARM 1
28 #define RTC_MINUTES 2
29 #define RTC_MINUTES_ALARM 3
30 #define RTC_HOURS 4
31 #define RTC_HOURS_ALARM 5
32 /* RTC_*_alarm is always true if 2 MSBs are set */
33 # define RTC_ALARM_DONT_CARE 0xC0
35 #define RTC_DAY_OF_WEEK 6
36 #define RTC_DAY_OF_MONTH 7
37 #define RTC_MONTH 8
38 #define RTC_YEAR 9
40 /* control registers - Moto names
42 #define RTC_REG_A 10
43 #define RTC_REG_B 11
44 #define RTC_REG_C 12
45 #define RTC_REG_D 13
47 /**********************************************************************
48 * register details
49 **********************************************************************/
50 #define RTC_FREQ_SELECT RTC_REG_A
52 /* update-in-progress - set to "1" 244 microsecs before RTC goes off the bus,
53 * reset after update (may take 1.984ms @ 32768Hz RefClock) is complete,
54 * totalling to a max high interval of 2.228 ms.
56 # define RTC_UIP 0x80
57 # define RTC_DIV_CTL 0x70
58 /* divider control: refclock values 4.194 / 1.049 MHz / 32.768 kHz */
59 # define RTC_REF_CLCK_4MHZ 0x00
60 # define RTC_REF_CLCK_1MHZ 0x10
61 # define RTC_REF_CLCK_32KHZ 0x20
62 /* 2 values for divider stage reset, others for "testing purposes only" */
63 # define RTC_DIV_RESET1 0x60
64 # define RTC_DIV_RESET2 0x70
65 /* Periodic intr. / Square wave rate select. 0=none, 1=32.8kHz,... 15=2Hz */
66 # define RTC_RATE_SELECT 0x0F
68 /**********************************************************************/
69 #define RTC_CONTROL RTC_REG_B
70 # define RTC_SET 0x80 /* disable updates for clock setting */
71 # define RTC_PIE 0x40 /* periodic interrupt enable */
72 # define RTC_AIE 0x20 /* alarm interrupt enable */
73 # define RTC_UIE 0x10 /* update-finished interrupt enable */
74 # define RTC_SQWE 0x08 /* enable square-wave output */
75 # define RTC_DM_BINARY 0x04 /* all time/date values are BCD if clear */
76 # define RTC_24H 0x02 /* 24 hour mode - else hours bit 7 means pm */
77 # define RTC_DST_EN 0x01 /* auto switch DST - works f. USA only */
79 /**********************************************************************/
80 #define RTC_INTR_FLAGS RTC_REG_C
81 /* caution - cleared by read */
82 # define RTC_IRQF 0x80 /* any of the following 3 is active */
83 # define RTC_PF 0x40
84 # define RTC_AF 0x20
85 # define RTC_UF 0x10
87 /**********************************************************************/
88 #define RTC_VALID RTC_REG_D
89 # define RTC_VRT 0x80 /* valid RAM and time */
90 /**********************************************************************/
92 #endif /* _MC146818RTC_H */