5 * 'tty.h' defines some structures used by tty_io.c and some defines.
9 * These constants are also useful for user-level apps (e.g., VC
12 #define MIN_NR_CONSOLES 1 /* must be at least 1 */
13 #define MAX_NR_CONSOLES 63 /* serial lines start at 64 */
14 #define MAX_NR_USER_CONSOLES 63 /* must be root to allocate above this */
15 /* Note: the ioctl VT_GETSTATE does not work for
16 consoles 16 and higher (since it returns a short) */
19 #include <linux/config.h>
21 #include <linux/major.h>
22 #include <linux/termios.h>
23 #include <linux/workqueue.h>
24 #include <linux/tty_driver.h>
25 #include <linux/tty_ldisc.h>
27 #include <asm/system.h>
31 * (Note: the *_driver.minor_start values 1, 64, 128, 192 are
32 * hardcoded at present.)
34 #define NR_PTYS CONFIG_LEGACY_PTY_COUNT /* Number of legacy ptys */
35 #define NR_UNIX98_PTY_DEFAULT 4096 /* Default maximum for Unix98 ptys */
36 #define NR_UNIX98_PTY_MAX (1 << MINORBITS) /* Absolute limit */
40 * These are set up by the setup-routine at boot-time:
46 u16 dontuse1
; /* 0x02 -- EXT_MEM_K sits here */
47 u16 orig_video_page
; /* 0x04 */
48 u8 orig_video_mode
; /* 0x06 */
49 u8 orig_video_cols
; /* 0x07 */
50 u16 unused2
; /* 0x08 */
51 u16 orig_video_ega_bx
; /* 0x0a */
52 u16 unused3
; /* 0x0c */
53 u8 orig_video_lines
; /* 0x0e */
54 u8 orig_video_isVGA
; /* 0x0f */
55 u16 orig_video_points
; /* 0x10 */
57 /* VESA graphic mode -- linear frame buffer */
58 u16 lfb_width
; /* 0x12 */
59 u16 lfb_height
; /* 0x14 */
60 u16 lfb_depth
; /* 0x16 */
61 u32 lfb_base
; /* 0x18 */
62 u32 lfb_size
; /* 0x1c */
63 u16 dontuse2
, dontuse3
; /* 0x20 -- CL_MAGIC and CL_OFFSET here */
64 u16 lfb_linelength
; /* 0x24 */
65 u8 red_size
; /* 0x26 */
66 u8 red_pos
; /* 0x27 */
67 u8 green_size
; /* 0x28 */
68 u8 green_pos
; /* 0x29 */
69 u8 blue_size
; /* 0x2a */
70 u8 blue_pos
; /* 0x2b */
71 u8 rsvd_size
; /* 0x2c */
72 u8 rsvd_pos
; /* 0x2d */
73 u16 vesapm_seg
; /* 0x2e */
74 u16 vesapm_off
; /* 0x30 */
76 u16 vesa_attributes
; /* 0x34 */
77 u32 capabilities
; /* 0x36 */
78 /* 0x3a -- 0x3f reserved for future expansion */
81 extern struct screen_info screen_info
;
83 #define ORIG_X (screen_info.orig_x)
84 #define ORIG_Y (screen_info.orig_y)
85 #define ORIG_VIDEO_MODE (screen_info.orig_video_mode)
86 #define ORIG_VIDEO_COLS (screen_info.orig_video_cols)
87 #define ORIG_VIDEO_EGA_BX (screen_info.orig_video_ega_bx)
88 #define ORIG_VIDEO_LINES (screen_info.orig_video_lines)
89 #define ORIG_VIDEO_ISVGA (screen_info.orig_video_isVGA)
90 #define ORIG_VIDEO_POINTS (screen_info.orig_video_points)
92 #define VIDEO_TYPE_MDA 0x10 /* Monochrome Text Display */
93 #define VIDEO_TYPE_CGA 0x11 /* CGA Display */
94 #define VIDEO_TYPE_EGAM 0x20 /* EGA/VGA in Monochrome Mode */
95 #define VIDEO_TYPE_EGAC 0x21 /* EGA in Color Mode */
96 #define VIDEO_TYPE_VGAC 0x22 /* VGA+ in Color Mode */
97 #define VIDEO_TYPE_VLFB 0x23 /* VESA VGA in graphic mode */
99 #define VIDEO_TYPE_PICA_S3 0x30 /* ACER PICA-61 local S3 video */
100 #define VIDEO_TYPE_MIPS_G364 0x31 /* MIPS Magnum 4000 G364 video */
101 #define VIDEO_TYPE_SGI 0x33 /* Various SGI graphics hardware */
103 #define VIDEO_TYPE_TGAC 0x40 /* DEC TGA */
105 #define VIDEO_TYPE_SUN 0x50 /* Sun frame buffer. */
106 #define VIDEO_TYPE_SUNPCI 0x51 /* Sun PCI based frame buffer. */
108 #define VIDEO_TYPE_PMAC 0x60 /* PowerMacintosh frame buffer. */
111 * This character is the same as _POSIX_VDISABLE: it cannot be used as
112 * a c_cc[] character, but indicates that a particular special character
113 * isn't in use (eg VINTR has no character etc)
115 #define __DISABLED_CHAR '\0'
118 * This is the flip buffer used for the tty driver. The buffer is
119 * located in the tty structure, and is used as a high speed interface
120 * between the tty driver and the tty line discipline.
122 #define TTY_FLIPBUF_SIZE 512
124 struct tty_flip_buffer
{
125 struct work_struct work
;
126 struct semaphore pty_sem
;
128 unsigned char *flag_buf_ptr
;
131 unsigned char char_buf
[2*TTY_FLIPBUF_SIZE
];
132 char flag_buf
[2*TTY_FLIPBUF_SIZE
];
133 unsigned char slop
[4]; /* N.B. bug overwrites buffer by 1 */
136 * The pty uses char_buf and flag_buf as a contiguous buffer
138 #define PTY_BUF_SIZE 4*TTY_FLIPBUF_SIZE
141 * When a break, frame error, or parity error happens, these codes are
142 * stuffed into the flags buffer.
148 #define TTY_OVERRUN 4
150 #define INTR_CHAR(tty) ((tty)->termios->c_cc[VINTR])
151 #define QUIT_CHAR(tty) ((tty)->termios->c_cc[VQUIT])
152 #define ERASE_CHAR(tty) ((tty)->termios->c_cc[VERASE])
153 #define KILL_CHAR(tty) ((tty)->termios->c_cc[VKILL])
154 #define EOF_CHAR(tty) ((tty)->termios->c_cc[VEOF])
155 #define TIME_CHAR(tty) ((tty)->termios->c_cc[VTIME])
156 #define MIN_CHAR(tty) ((tty)->termios->c_cc[VMIN])
157 #define SWTC_CHAR(tty) ((tty)->termios->c_cc[VSWTC])
158 #define START_CHAR(tty) ((tty)->termios->c_cc[VSTART])
159 #define STOP_CHAR(tty) ((tty)->termios->c_cc[VSTOP])
160 #define SUSP_CHAR(tty) ((tty)->termios->c_cc[VSUSP])
161 #define EOL_CHAR(tty) ((tty)->termios->c_cc[VEOL])
162 #define REPRINT_CHAR(tty) ((tty)->termios->c_cc[VREPRINT])
163 #define DISCARD_CHAR(tty) ((tty)->termios->c_cc[VDISCARD])
164 #define WERASE_CHAR(tty) ((tty)->termios->c_cc[VWERASE])
165 #define LNEXT_CHAR(tty) ((tty)->termios->c_cc[VLNEXT])
166 #define EOL2_CHAR(tty) ((tty)->termios->c_cc[VEOL2])
168 #define _I_FLAG(tty,f) ((tty)->termios->c_iflag & (f))
169 #define _O_FLAG(tty,f) ((tty)->termios->c_oflag & (f))
170 #define _C_FLAG(tty,f) ((tty)->termios->c_cflag & (f))
171 #define _L_FLAG(tty,f) ((tty)->termios->c_lflag & (f))
173 #define I_IGNBRK(tty) _I_FLAG((tty),IGNBRK)
174 #define I_BRKINT(tty) _I_FLAG((tty),BRKINT)
175 #define I_IGNPAR(tty) _I_FLAG((tty),IGNPAR)
176 #define I_PARMRK(tty) _I_FLAG((tty),PARMRK)
177 #define I_INPCK(tty) _I_FLAG((tty),INPCK)
178 #define I_ISTRIP(tty) _I_FLAG((tty),ISTRIP)
179 #define I_INLCR(tty) _I_FLAG((tty),INLCR)
180 #define I_IGNCR(tty) _I_FLAG((tty),IGNCR)
181 #define I_ICRNL(tty) _I_FLAG((tty),ICRNL)
182 #define I_IUCLC(tty) _I_FLAG((tty),IUCLC)
183 #define I_IXON(tty) _I_FLAG((tty),IXON)
184 #define I_IXANY(tty) _I_FLAG((tty),IXANY)
185 #define I_IXOFF(tty) _I_FLAG((tty),IXOFF)
186 #define I_IMAXBEL(tty) _I_FLAG((tty),IMAXBEL)
187 #define I_IUTF8(tty) _I_FLAG((tty),IUTF8)
189 #define O_OPOST(tty) _O_FLAG((tty),OPOST)
190 #define O_OLCUC(tty) _O_FLAG((tty),OLCUC)
191 #define O_ONLCR(tty) _O_FLAG((tty),ONLCR)
192 #define O_OCRNL(tty) _O_FLAG((tty),OCRNL)
193 #define O_ONOCR(tty) _O_FLAG((tty),ONOCR)
194 #define O_ONLRET(tty) _O_FLAG((tty),ONLRET)
195 #define O_OFILL(tty) _O_FLAG((tty),OFILL)
196 #define O_OFDEL(tty) _O_FLAG((tty),OFDEL)
197 #define O_NLDLY(tty) _O_FLAG((tty),NLDLY)
198 #define O_CRDLY(tty) _O_FLAG((tty),CRDLY)
199 #define O_TABDLY(tty) _O_FLAG((tty),TABDLY)
200 #define O_BSDLY(tty) _O_FLAG((tty),BSDLY)
201 #define O_VTDLY(tty) _O_FLAG((tty),VTDLY)
202 #define O_FFDLY(tty) _O_FLAG((tty),FFDLY)
204 #define C_BAUD(tty) _C_FLAG((tty),CBAUD)
205 #define C_CSIZE(tty) _C_FLAG((tty),CSIZE)
206 #define C_CSTOPB(tty) _C_FLAG((tty),CSTOPB)
207 #define C_CREAD(tty) _C_FLAG((tty),CREAD)
208 #define C_PARENB(tty) _C_FLAG((tty),PARENB)
209 #define C_PARODD(tty) _C_FLAG((tty),PARODD)
210 #define C_HUPCL(tty) _C_FLAG((tty),HUPCL)
211 #define C_CLOCAL(tty) _C_FLAG((tty),CLOCAL)
212 #define C_CIBAUD(tty) _C_FLAG((tty),CIBAUD)
213 #define C_CRTSCTS(tty) _C_FLAG((tty),CRTSCTS)
215 #define L_ISIG(tty) _L_FLAG((tty),ISIG)
216 #define L_ICANON(tty) _L_FLAG((tty),ICANON)
217 #define L_XCASE(tty) _L_FLAG((tty),XCASE)
218 #define L_ECHO(tty) _L_FLAG((tty),ECHO)
219 #define L_ECHOE(tty) _L_FLAG((tty),ECHOE)
220 #define L_ECHOK(tty) _L_FLAG((tty),ECHOK)
221 #define L_ECHONL(tty) _L_FLAG((tty),ECHONL)
222 #define L_NOFLSH(tty) _L_FLAG((tty),NOFLSH)
223 #define L_TOSTOP(tty) _L_FLAG((tty),TOSTOP)
224 #define L_ECHOCTL(tty) _L_FLAG((tty),ECHOCTL)
225 #define L_ECHOPRT(tty) _L_FLAG((tty),ECHOPRT)
226 #define L_ECHOKE(tty) _L_FLAG((tty),ECHOKE)
227 #define L_FLUSHO(tty) _L_FLAG((tty),FLUSHO)
228 #define L_PENDIN(tty) _L_FLAG((tty),PENDIN)
229 #define L_IEXTEN(tty) _L_FLAG((tty),IEXTEN)
233 * Where all of the state associated with a tty is kept while the tty
234 * is open. Since the termios state should be kept even if the tty
235 * has been closed --- for things like the baud rate, etc --- it is
236 * not stored here, but rather a pointer to the real state is stored
237 * here. Possible the winsize structure should have the same
238 * treatment, but (1) the default 80x24 is usually right and (2) it's
239 * most often used by a windowing system, which will set the correct
240 * size each time the window is created or resized anyway.
245 struct tty_driver
*driver
;
247 struct tty_ldisc ldisc
;
248 struct semaphore termios_sem
;
249 struct termios
*termios
, *termios_locked
;
255 struct winsize winsize
;
256 unsigned char stopped
:1, hw_stopped
:1, flow_stopped
:1, packet
:1;
257 unsigned char low_latency
:1, warned
:1;
258 unsigned char ctrl_status
;
260 struct tty_struct
*link
;
261 struct fasync_struct
*fasync
;
262 struct tty_flip_buffer flip
;
264 int alt_speed
; /* For magic substitution of 38400 bps */
265 wait_queue_head_t write_wait
;
266 wait_queue_head_t read_wait
;
267 struct work_struct hangup_work
;
270 struct list_head tty_files
;
272 #define N_TTY_BUF_SIZE 4096
275 * The following is data for the N_TTY line discipline. For
276 * historical reasons, this is included in the tty structure.
279 unsigned char lnext
:1, erasing
:1, raw
:1, real_raw
:1, icanon
:1;
280 unsigned char closing
:1;
281 unsigned short minimum_to_wake
;
282 unsigned long overrun_time
;
284 unsigned long process_char_map
[256/(8*sizeof(unsigned long))];
289 unsigned long read_flags
[N_TTY_BUF_SIZE
/(8*sizeof(unsigned long))];
291 unsigned long canon_head
;
292 unsigned int canon_column
;
293 struct semaphore atomic_read
;
294 struct semaphore atomic_write
;
295 unsigned char *write_buf
;
297 spinlock_t read_lock
;
298 /* If the tty has a pending do_SAK, queue it here - akpm */
299 struct work_struct SAK_work
;
302 /* tty magic number */
303 #define TTY_MAGIC 0x5401
306 * These bits are used in the flags field of the tty structure.
308 * So that interrupts won't be able to mess up the queues,
309 * copy_to_cooked must be atomic with respect to itself, as must
310 * tty->write. Thus, you must use the inline functions set_bit() and
311 * clear_bit() to make things atomic.
313 #define TTY_THROTTLED 0 /* Call unthrottle() at threshold min */
314 #define TTY_IO_ERROR 1 /* Canse an I/O error (may be no ldisc too) */
315 #define TTY_OTHER_CLOSED 2 /* Other side (if any) has closed */
316 #define TTY_EXCLUSIVE 3 /* Exclusive open mode */
317 #define TTY_DEBUG 4 /* Debugging */
318 #define TTY_DO_WRITE_WAKEUP 5 /* Call write_wakeup after queuing new */
319 #define TTY_PUSH 6 /* n_tty private */
320 #define TTY_CLOSING 7 /* ->close() in progress */
321 #define TTY_DONT_FLIP 8 /* Defer buffer flip */
322 #define TTY_LDISC 9 /* Line discipline attached */
323 #define TTY_HW_COOK_OUT 14 /* Hardware can do output cooking */
324 #define TTY_HW_COOK_IN 15 /* Hardware can do input cooking */
325 #define TTY_PTY_LOCK 16 /* pty private */
326 #define TTY_NO_WRITE_SPLIT 17 /* Preserve write boundaries to driver */
327 #define TTY_HUPPED 18 /* Post driver->hangup() */
329 #define TTY_WRITE_FLUSH(tty) tty_write_flush((tty))
331 extern void tty_write_flush(struct tty_struct
*);
333 extern struct termios tty_std_termios
;
334 extern int fg_console
, last_console
, want_console
;
336 extern int kmsg_redirect
;
338 extern void console_init(void);
339 extern int vcs_init(void);
341 extern int tty_paranoia_check(struct tty_struct
*tty
, struct inode
*inode
,
342 const char *routine
);
343 extern char *tty_name(struct tty_struct
*tty
, char *buf
);
344 extern void tty_wait_until_sent(struct tty_struct
* tty
, long timeout
);
345 extern int tty_check_change(struct tty_struct
* tty
);
346 extern void stop_tty(struct tty_struct
* tty
);
347 extern void start_tty(struct tty_struct
* tty
);
348 extern int tty_register_ldisc(int disc
, struct tty_ldisc
*new_ldisc
);
349 extern int tty_unregister_ldisc(int disc
);
350 extern int tty_register_driver(struct tty_driver
*driver
);
351 extern int tty_unregister_driver(struct tty_driver
*driver
);
352 extern void tty_register_device(struct tty_driver
*driver
, unsigned index
, struct device
*dev
);
353 extern void tty_unregister_device(struct tty_driver
*driver
, unsigned index
);
354 extern int tty_read_raw_data(struct tty_struct
*tty
, unsigned char *bufp
,
356 extern void tty_write_message(struct tty_struct
*tty
, char *msg
);
358 extern int is_orphaned_pgrp(int pgrp
);
359 extern int is_ignored(int sig
);
360 extern int tty_signal(int sig
, struct tty_struct
*tty
);
361 extern void tty_hangup(struct tty_struct
* tty
);
362 extern void tty_vhangup(struct tty_struct
* tty
);
363 extern void tty_unhangup(struct file
*filp
);
364 extern int tty_hung_up_p(struct file
* filp
);
365 extern void do_SAK(struct tty_struct
*tty
);
366 extern void disassociate_ctty(int priv
);
367 extern void tty_flip_buffer_push(struct tty_struct
*tty
);
368 extern int tty_get_baud_rate(struct tty_struct
*tty
);
369 extern int tty_termios_baud_rate(struct termios
*termios
);
371 extern struct tty_ldisc
*tty_ldisc_ref(struct tty_struct
*);
372 extern void tty_ldisc_deref(struct tty_ldisc
*);
373 extern struct tty_ldisc
*tty_ldisc_ref_wait(struct tty_struct
*);
375 extern struct tty_ldisc
*tty_ldisc_get(int);
376 extern void tty_ldisc_put(int);
378 extern void tty_wakeup(struct tty_struct
*tty
);
379 extern void tty_ldisc_flush(struct tty_struct
*tty
);
382 extern struct semaphore tty_sem
;
385 extern struct tty_ldisc tty_ldisc_N_TTY
;
388 extern int n_tty_ioctl(struct tty_struct
* tty
, struct file
* file
,
389 unsigned int cmd
, unsigned long arg
);
393 extern void serial_console_init(void);
397 extern int pcxe_open(struct tty_struct
*tty
, struct file
*filp
);
401 extern void console_print(const char *);
405 extern int vt_ioctl(struct tty_struct
*tty
, struct file
* file
,
406 unsigned int cmd
, unsigned long arg
);
408 static inline dev_t
tty_devnum(struct tty_struct
*tty
)
410 return MKDEV(tty
->driver
->major
, tty
->driver
->minor_start
) + tty
->index
;
413 #endif /* __KERNEL__ */