Merge branch 'for-linus' of git://git.infradead.org/users/sameo/mfd-2.6
[linux-btrfs-devel.git] / drivers / media / video / gspca / gspca.h
blob49e2fcbe81fbbfedcd08c04a63e09deaf48d524e
1 #ifndef GSPCAV2_H
2 #define GSPCAV2_H
4 #include <linux/module.h>
5 #include <linux/kernel.h>
6 #include <linux/usb.h>
7 #include <linux/videodev2.h>
8 #include <media/v4l2-common.h>
9 #include <linux/mutex.h>
11 /* compilation option */
12 /*#define GSPCA_DEBUG 1*/
14 #ifdef GSPCA_DEBUG
15 /* GSPCA our debug messages */
16 extern int gspca_debug;
17 #define PDEBUG(level, fmt, args...) \
18 do {\
19 if (gspca_debug & (level)) \
20 printk(KERN_INFO MODULE_NAME ": " fmt "\n", ## args); \
21 } while (0)
22 #define D_ERR 0x01
23 #define D_PROBE 0x02
24 #define D_CONF 0x04
25 #define D_STREAM 0x08
26 #define D_FRAM 0x10
27 #define D_PACK 0x20
28 #define D_USBI 0x00
29 #define D_USBO 0x00
30 #define D_V4L2 0x0100
31 #else
32 #define PDEBUG(level, fmt, args...)
33 #endif
34 #undef err
35 #define err(fmt, args...) \
36 printk(KERN_ERR MODULE_NAME ": " fmt "\n", ## args)
37 #undef info
38 #define info(fmt, args...) \
39 printk(KERN_INFO MODULE_NAME ": " fmt "\n", ## args)
40 #undef warn
41 #define warn(fmt, args...) \
42 printk(KERN_WARNING MODULE_NAME ": " fmt "\n", ## args)
44 #define GSPCA_MAX_FRAMES 16 /* maximum number of video frame buffers */
45 /* image transfers */
46 #define MAX_NURBS 4 /* max number of URBs */
49 /* used to list framerates supported by a camera mode (resolution) */
50 struct framerates {
51 const u8 *rates;
52 int nrates;
55 /* control definition */
56 struct gspca_ctrl {
57 s16 val; /* current value */
58 s16 def; /* default value */
59 s16 min, max; /* minimum and maximum values */
62 /* device information - set at probe time */
63 struct cam {
64 const struct v4l2_pix_format *cam_mode; /* size nmodes */
65 const struct framerates *mode_framerates; /* must have size nmodes,
66 * just like cam_mode */
67 struct gspca_ctrl *ctrls; /* control table - size nctrls */
68 /* may be NULL */
69 u32 bulk_size; /* buffer size when image transfer by bulk */
70 u32 input_flags; /* value for ENUM_INPUT status flags */
71 u8 nmodes; /* size of cam_mode */
72 u8 no_urb_create; /* don't create transfer URBs */
73 u8 bulk_nurbs; /* number of URBs in bulk mode
74 * - cannot be > MAX_NURBS
75 * - when 0 and bulk_size != 0 means
76 * 1 URB and submit done by subdriver */
77 u8 bulk; /* image transfer by 0:isoc / 1:bulk */
78 u8 npkt; /* number of packets in an ISOC message
79 * 0 is the default value: 32 packets */
80 u8 reverse_alts; /* Alt settings are in high to low order */
83 struct gspca_dev;
84 struct gspca_frame;
86 /* subdriver operations */
87 typedef int (*cam_op) (struct gspca_dev *);
88 typedef void (*cam_v_op) (struct gspca_dev *);
89 typedef int (*cam_cf_op) (struct gspca_dev *, const struct usb_device_id *);
90 typedef int (*cam_jpg_op) (struct gspca_dev *,
91 struct v4l2_jpegcompression *);
92 typedef int (*cam_reg_op) (struct gspca_dev *,
93 struct v4l2_dbg_register *);
94 typedef int (*cam_ident_op) (struct gspca_dev *,
95 struct v4l2_dbg_chip_ident *);
96 typedef void (*cam_streamparm_op) (struct gspca_dev *,
97 struct v4l2_streamparm *);
98 typedef int (*cam_qmnu_op) (struct gspca_dev *,
99 struct v4l2_querymenu *);
100 typedef void (*cam_pkt_op) (struct gspca_dev *gspca_dev,
101 u8 *data,
102 int len);
103 typedef int (*cam_int_pkt_op) (struct gspca_dev *gspca_dev,
104 u8 *data,
105 int len);
107 struct ctrl {
108 struct v4l2_queryctrl qctrl;
109 int (*set)(struct gspca_dev *, __s32);
110 int (*get)(struct gspca_dev *, __s32 *);
111 cam_v_op set_control;
114 /* subdriver description */
115 struct sd_desc {
116 /* information */
117 const char *name; /* sub-driver name */
118 /* controls */
119 const struct ctrl *ctrls; /* static control definition */
120 int nctrls;
121 /* mandatory operations */
122 cam_cf_op config; /* called on probe */
123 cam_op init; /* called on probe and resume */
124 cam_op start; /* called on stream on after URBs creation */
125 cam_pkt_op pkt_scan;
126 /* optional operations */
127 cam_op isoc_init; /* called on stream on before getting the EP */
128 cam_op isoc_nego; /* called when URB submit failed with NOSPC */
129 cam_v_op stopN; /* called on stream off - main alt */
130 cam_v_op stop0; /* called on stream off & disconnect - alt 0 */
131 cam_v_op dq_callback; /* called when a frame has been dequeued */
132 cam_jpg_op get_jcomp;
133 cam_jpg_op set_jcomp;
134 cam_qmnu_op querymenu;
135 cam_streamparm_op get_streamparm;
136 cam_streamparm_op set_streamparm;
137 #ifdef CONFIG_VIDEO_ADV_DEBUG
138 cam_reg_op set_register;
139 cam_reg_op get_register;
140 #endif
141 cam_ident_op get_chip_ident;
142 #if defined(CONFIG_INPUT) || defined(CONFIG_INPUT_MODULE)
143 cam_int_pkt_op int_pkt_scan;
144 /* other_input makes the gspca core create gspca_dev->input even when
145 int_pkt_scan is NULL, for cams with non interrupt driven buttons */
146 u8 other_input;
147 #endif
150 /* packet types when moving from iso buf to frame buf */
151 enum gspca_packet_type {
152 DISCARD_PACKET,
153 FIRST_PACKET,
154 INTER_PACKET,
155 LAST_PACKET
158 struct gspca_frame {
159 __u8 *data; /* frame buffer */
160 int vma_use_count;
161 struct v4l2_buffer v4l2_buf;
164 struct gspca_dev {
165 struct video_device vdev; /* !! must be the first item */
166 struct module *module; /* subdriver handling the device */
167 struct usb_device *dev;
168 struct file *capt_file; /* file doing video capture */
169 #if defined(CONFIG_INPUT) || defined(CONFIG_INPUT_MODULE)
170 struct input_dev *input_dev;
171 char phys[64]; /* physical device path */
172 #endif
174 struct cam cam; /* device information */
175 const struct sd_desc *sd_desc; /* subdriver description */
176 unsigned ctrl_dis; /* disabled controls (bit map) */
177 unsigned ctrl_inac; /* inactive controls (bit map) */
179 #define USB_BUF_SZ 64
180 __u8 *usb_buf; /* buffer for USB exchanges */
181 struct urb *urb[MAX_NURBS];
182 #if defined(CONFIG_INPUT) || defined(CONFIG_INPUT_MODULE)
183 struct urb *int_urb;
184 #endif
186 __u8 *frbuf; /* buffer for nframes */
187 struct gspca_frame frame[GSPCA_MAX_FRAMES];
188 u8 *image; /* image beeing filled */
189 __u32 frsz; /* frame size */
190 u32 image_len; /* current length of image */
191 atomic_t fr_q; /* next frame to queue */
192 atomic_t fr_i; /* frame being filled */
193 signed char fr_queue[GSPCA_MAX_FRAMES]; /* frame queue */
194 char nframes; /* number of frames */
195 u8 fr_o; /* next frame to dequeue */
196 __u8 last_packet_type;
197 __s8 empty_packet; /* if (-1) don't check empty packets */
198 __u8 streaming;
200 __u8 curr_mode; /* current camera mode */
201 __u32 pixfmt; /* current mode parameters */
202 __u16 width;
203 __u16 height;
204 __u32 sequence; /* frame sequence number */
206 wait_queue_head_t wq; /* wait queue */
207 struct mutex usb_lock; /* usb exchange protection */
208 struct mutex queue_lock; /* ISOC queue protection */
209 int usb_err; /* USB error - protected by usb_lock */
210 u16 pkt_size; /* ISOC packet size */
211 #ifdef CONFIG_PM
212 char frozen; /* suspend - resume */
213 #endif
214 char present; /* device connected */
215 char nbufread; /* number of buffers for read() */
216 char memory; /* memory type (V4L2_MEMORY_xxx) */
217 __u8 iface; /* USB interface number */
218 __u8 alt; /* USB alternate setting */
219 __u8 nbalt; /* number of USB alternate settings */
220 u8 audio; /* presence of audio device */
223 int gspca_dev_probe(struct usb_interface *intf,
224 const struct usb_device_id *id,
225 const struct sd_desc *sd_desc,
226 int dev_size,
227 struct module *module);
228 int gspca_dev_probe2(struct usb_interface *intf,
229 const struct usb_device_id *id,
230 const struct sd_desc *sd_desc,
231 int dev_size,
232 struct module *module);
233 void gspca_disconnect(struct usb_interface *intf);
234 void gspca_frame_add(struct gspca_dev *gspca_dev,
235 enum gspca_packet_type packet_type,
236 const u8 *data,
237 int len);
238 #ifdef CONFIG_PM
239 int gspca_suspend(struct usb_interface *intf, pm_message_t message);
240 int gspca_resume(struct usb_interface *intf);
241 #endif
242 int gspca_auto_gain_n_exposure(struct gspca_dev *gspca_dev, int avg_lum,
243 int desired_avg_lum, int deadzone, int gain_knee, int exposure_knee);
244 #endif /* GSPCAV2_H */