drivers/net/wireless/prism54/islpci_dev.h

   1 /*
   2  *  Copyright (C) 2002 Intersil Americas Inc.
   3  *  Copyright (C) 2003 Herbert Valerio Riedel <hvr@gnu.org>
   4  *  Copyright (C) 2003 Luis R. Rodriguez <mcgrof@ruslug.rutgers.edu>
   5  *  Copyright (C) 2003 Aurelien Alleaume <slts@free.fr>
   6  *
   7  *  This program is free software; you can redistribute it and/or modify
   8  *  it under the terms of the GNU General Public License as published by
   9  *  the Free Software Foundation; either version 2 of the License
  10  *
  11  *  This program is distributed in the hope that it will be useful,
  12  *  but WITHOUT ANY WARRANTY; without even the implied warranty of
  13  *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  14  *  GNU General Public License for more details.
  15  *
  16  *  You should have received a copy of the GNU General Public License
  17  *  along with this program; if not, write to the Free Software
  18  *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  19  *
  20  */
  21
  22 #ifndef _ISLPCI_DEV_H
  23 #define _ISLPCI_DEV_H
  24
  25 #include <linux/irqreturn.h>
  26 #include <linux/netdevice.h>
  27 #include <linux/wireless.h>
  28 #include <net/iw_handler.h>
  29 #include <linux/list.h>
  30 #include <linux/mutex.h>
  31
  32 #include "isl_38xx.h"
  33 #include "isl_oid.h"
  34 #include "islpci_mgt.h"
  35
  36 /* some states might not be superflous and may be removed when
  37    design is finalized (hvr) */
  38 typedef enum {
  39         PRV_STATE_OFF = 0,      /* this means hw_unavailable is != 0 */
  40         PRV_STATE_PREBOOT,      /* we are in a pre-boot state (empty RAM) */
  41         PRV_STATE_BOOT,         /* boot state (fw upload, run fw) */
  42         PRV_STATE_POSTBOOT,     /* after boot state, need reset now */
  43         PRV_STATE_PREINIT,      /* pre-init state */
  44         PRV_STATE_INIT,         /* init state (restore MIB backup to device) */
  45         PRV_STATE_READY,        /* driver&device are in operational state */
  46         PRV_STATE_SLEEP         /* device in sleep mode */
  47 } islpci_state_t;
  48
  49 /* ACL using MAC address */
  50 struct mac_entry {
  51    struct list_head _list;
  52    char addr[ETH_ALEN];
  53 };
  54
  55 struct islpci_acl {
  56    enum { MAC_POLICY_OPEN=0, MAC_POLICY_ACCEPT=1, MAC_POLICY_REJECT=2 } policy;
  57    struct list_head mac_list;  /* a list of mac_entry */
  58    int size;   /* size of queue */
  59    struct mutex lock;   /* accessed in ioctls and trap_work */
  60 };
  61
  62 struct islpci_membuf {
  63         int size;                   /* size of memory */
  64         void *mem;                  /* address of memory as seen by CPU */
  65         dma_addr_t pci_addr;        /* address of memory as seen by device */
  66 };
  67
  68 #define MAX_BSS_WPA_IE_COUNT 64
  69 #define MAX_WPA_IE_LEN 64
  70 struct islpci_bss_wpa_ie {
  71         struct list_head list;
  72         unsigned long last_update;
  73         u8 bssid[ETH_ALEN];
  74         u8 wpa_ie[MAX_WPA_IE_LEN];
  75         size_t wpa_ie_len;
  76
  77 };
  78
  79 typedef struct {
  80         spinlock_t slock;       /* generic spinlock; */
  81
  82         u32 priv_oid;
  83
  84         /* our mib cache */
  85         u32 iw_mode;
  86         struct rw_semaphore mib_sem;
  87         void **mib;
  88         char nickname[IW_ESSID_MAX_SIZE+1];
  89
  90         /* Take care of the wireless stats */
  91         struct work_struct stats_work;
  92         struct mutex stats_lock;
  93         /* remember when we last updated the stats */
  94         unsigned long stats_timestamp;
  95         /* The first is accessed under semaphore locking.
  96          * The second is the clean one we return to iwconfig.
  97          */
  98         struct iw_statistics local_iwstatistics;
  99         struct iw_statistics iwstatistics;
 100
 101         struct iw_spy_data spy_data; /* iwspy support */
 102
 103         struct iw_public_data wireless_data;
 104
 105         int monitor_type; /* ARPHRD_IEEE80211 or ARPHRD_IEEE80211_PRISM */
 106
 107         struct islpci_acl acl;
 108
 109         /* PCI bus allocation & configuration members */
 110         struct pci_dev *pdev;   /* PCI structure information */
 111         char firmware[33];
 112
 113         void __iomem *device_base;      /* ioremapped device base address */
 114
 115         /* consistent DMA region */
 116         void *driver_mem_address;       /* base DMA address */
 117         dma_addr_t device_host_address; /* base DMA address (bus address) */
 118         dma_addr_t device_psm_buffer;   /* host memory for PSM buffering (bus address) */
 119
 120         /* our network_device structure  */
 121         struct net_device *ndev;
 122
 123         /* device queue interface members */
 124         struct isl38xx_cb *control_block;       /* device control block
 125                                                            (== driver_mem_address!) */
 126
 127         /* Each queue has three indexes:
 128          *   free/index_mgmt/data_rx/tx (called index, see below),
 129          *   driver_curr_frag, and device_curr_frag (in the control block)
 130          * All indexes are ever-increasing, but interpreted modulo the
 131          * device queue size when used.
 132          *   index <= device_curr_frag <= driver_curr_frag  at all times
 133          * For rx queues, [index, device_curr_frag) contains fragments
 134          * that the interrupt processing needs to handle (owned by driver).
 135          * [device_curr_frag, driver_curr_frag) is the free space in the
 136          * rx queue, waiting for data (owned by device).  The driver
 137          * increments driver_curr_frag to indicate to the device that more
 138          * buffers are available.
 139          * If device_curr_frag == driver_curr_frag, no more rx buffers are
 140          * available, and the rx DMA engine of the device is halted.
 141          * For tx queues, [index, device_curr_frag) contains fragments
 142          * where tx is done; they need to be freed (owned by driver).
 143          * [device_curr_frag, driver_curr_frag) contains the frames
 144          * that are being transferred (owned by device).  The driver
 145          * increments driver_curr_frag to indicate that more tx work
 146          * needs to be done.
 147          */
 148         u32 index_mgmt_rx;              /* real index mgmt rx queue */
 149         u32 index_mgmt_tx;              /* read index mgmt tx queue */
 150         u32 free_data_rx;       /* free pointer data rx queue */
 151         u32 free_data_tx;       /* free pointer data tx queue */
 152         u32 data_low_tx_full;   /* full detected flag */
 153
 154         /* frame memory buffers for the device queues */
 155         struct islpci_membuf mgmt_tx[ISL38XX_CB_MGMT_QSIZE];
 156         struct islpci_membuf mgmt_rx[ISL38XX_CB_MGMT_QSIZE];
 157         struct sk_buff *data_low_tx[ISL38XX_CB_TX_QSIZE];
 158         struct sk_buff *data_low_rx[ISL38XX_CB_RX_QSIZE];
 159         dma_addr_t pci_map_tx_address[ISL38XX_CB_TX_QSIZE];
 160         dma_addr_t pci_map_rx_address[ISL38XX_CB_RX_QSIZE];
 161
 162         /* wait for a reset interrupt */
 163         wait_queue_head_t reset_done;
 164
 165         /* used by islpci_mgt_transaction */
 166         struct mutex mgmt_lock; /* serialize access to mailbox and wqueue */
 167         struct islpci_mgmtframe *mgmt_received;   /* mbox for incoming frame */
 168         wait_queue_head_t mgmt_wqueue;            /* waitqueue for mbox */
 169
 170         /* state machine */
 171         islpci_state_t state;
 172         int state_off;          /* enumeration of off-state, if 0 then
 173                                  * we're not in any off-state */
 174
 175         /* WPA stuff */
 176         int wpa; /* WPA mode enabled */
 177         struct list_head bss_wpa_list;
 178         int num_bss_wpa;
 179         struct mutex wpa_lock;
 180         u8 wpa_ie[MAX_WPA_IE_LEN];
 181         size_t wpa_ie_len;
 182
 183         struct work_struct reset_task;
 184         int reset_task_pending;
 185 } islpci_private;
 186
 187 static inline islpci_state_t
 188 islpci_get_state(islpci_private *priv)
 189 {
 190         /* lock */
 191         return priv->state;
 192         /* unlock */
 193 }
 194
 195 islpci_state_t islpci_set_state(islpci_private *priv, islpci_state_t new_state);
 196
 197 #define ISLPCI_TX_TIMEOUT               (2*HZ)
 198
 199 irqreturn_t islpci_interrupt(int, void *);
 200
 201 int prism54_post_setup(islpci_private *, int);
 202 int islpci_reset(islpci_private *, int);
 203
 204 static inline void
 205 islpci_trigger(islpci_private *priv)
 206 {
 207         isl38xx_trigger_device(islpci_get_state(priv) == PRV_STATE_SLEEP,
 208                                priv->device_base);
 209 }
 210
 211 int islpci_free_memory(islpci_private *);
 212 struct net_device *islpci_setup(struct pci_dev *);
 213
 214 #define DRV_NAME        "prism54"
 215 #define DRV_VERSION     "1.2"
 216
 217 #endif                          /* _ISLPCI_DEV_H */