Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
[linux-btrfs-devel.git] / drivers / hwspinlock / omap_hwspinlock.c
bloba8f02734c026f0691a0e7b3847af07429bb937bd
1 /*
2 * OMAP hardware spinlock driver
4 * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com
6 * Contact: Simon Que <sque@ti.com>
7 * Hari Kanigeri <h-kanigeri2@ti.com>
8 * Ohad Ben-Cohen <ohad@wizery.com>
10 * This program is free software; you can redistribute it and/or
11 * modify it under the terms of the GNU General Public License
12 * version 2 as published by the Free Software Foundation.
14 * This program is distributed in the hope that it will be useful, but
15 * WITHOUT ANY WARRANTY; without even the implied warranty of
16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
17 * General Public License for more details.
20 #include <linux/kernel.h>
21 #include <linux/module.h>
22 #include <linux/device.h>
23 #include <linux/delay.h>
24 #include <linux/io.h>
25 #include <linux/bitops.h>
26 #include <linux/pm_runtime.h>
27 #include <linux/slab.h>
28 #include <linux/spinlock.h>
29 #include <linux/hwspinlock.h>
30 #include <linux/platform_device.h>
32 #include "hwspinlock_internal.h"
34 /* Spinlock register offsets */
35 #define SYSSTATUS_OFFSET 0x0014
36 #define LOCK_BASE_OFFSET 0x0800
38 #define SPINLOCK_NUMLOCKS_BIT_OFFSET (24)
40 /* Possible values of SPINLOCK_LOCK_REG */
41 #define SPINLOCK_NOTTAKEN (0) /* free */
42 #define SPINLOCK_TAKEN (1) /* locked */
44 #define to_omap_hwspinlock(lock) \
45 container_of(lock, struct omap_hwspinlock, lock)
47 struct omap_hwspinlock {
48 struct hwspinlock lock;
49 void __iomem *addr;
52 struct omap_hwspinlock_state {
53 int num_locks; /* Total number of locks in system */
54 void __iomem *io_base; /* Mapped base address */
57 static int omap_hwspinlock_trylock(struct hwspinlock *lock)
59 struct omap_hwspinlock *omap_lock = to_omap_hwspinlock(lock);
61 /* attempt to acquire the lock by reading its value */
62 return (SPINLOCK_NOTTAKEN == readl(omap_lock->addr));
65 static void omap_hwspinlock_unlock(struct hwspinlock *lock)
67 struct omap_hwspinlock *omap_lock = to_omap_hwspinlock(lock);
69 /* release the lock by writing 0 to it */
70 writel(SPINLOCK_NOTTAKEN, omap_lock->addr);
74 * relax the OMAP interconnect while spinning on it.
76 * The specs recommended that the retry delay time will be
77 * just over half of the time that a requester would be
78 * expected to hold the lock.
80 * The number below is taken from an hardware specs example,
81 * obviously it is somewhat arbitrary.
83 static void omap_hwspinlock_relax(struct hwspinlock *lock)
85 ndelay(50);
88 static const struct hwspinlock_ops omap_hwspinlock_ops = {
89 .trylock = omap_hwspinlock_trylock,
90 .unlock = omap_hwspinlock_unlock,
91 .relax = omap_hwspinlock_relax,
94 static int __devinit omap_hwspinlock_probe(struct platform_device *pdev)
96 struct omap_hwspinlock *omap_lock;
97 struct omap_hwspinlock_state *state;
98 struct hwspinlock *lock;
99 struct resource *res;
100 void __iomem *io_base;
101 int i, ret;
103 res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
104 if (!res)
105 return -ENODEV;
107 state = kzalloc(sizeof(*state), GFP_KERNEL);
108 if (!state)
109 return -ENOMEM;
111 io_base = ioremap(res->start, resource_size(res));
112 if (!io_base) {
113 ret = -ENOMEM;
114 goto free_state;
117 /* Determine number of locks */
118 i = readl(io_base + SYSSTATUS_OFFSET);
119 i >>= SPINLOCK_NUMLOCKS_BIT_OFFSET;
121 /* one of the four lsb's must be set, and nothing else */
122 if (hweight_long(i & 0xf) != 1 || i > 8) {
123 ret = -EINVAL;
124 goto iounmap_base;
127 state->num_locks = i * 32;
128 state->io_base = io_base;
130 platform_set_drvdata(pdev, state);
133 * runtime PM will make sure the clock of this module is
134 * enabled iff at least one lock is requested
136 pm_runtime_enable(&pdev->dev);
138 for (i = 0; i < state->num_locks; i++) {
139 omap_lock = kzalloc(sizeof(*omap_lock), GFP_KERNEL);
140 if (!omap_lock) {
141 ret = -ENOMEM;
142 goto free_locks;
145 omap_lock->lock.dev = &pdev->dev;
146 omap_lock->lock.owner = THIS_MODULE;
147 omap_lock->lock.id = i;
148 omap_lock->lock.ops = &omap_hwspinlock_ops;
149 omap_lock->addr = io_base + LOCK_BASE_OFFSET + sizeof(u32) * i;
151 ret = hwspin_lock_register(&omap_lock->lock);
152 if (ret) {
153 kfree(omap_lock);
154 goto free_locks;
158 return 0;
160 free_locks:
161 while (--i >= 0) {
162 lock = hwspin_lock_unregister(i);
163 /* this should't happen, but let's give our best effort */
164 if (!lock) {
165 dev_err(&pdev->dev, "%s: cleanups failed\n", __func__);
166 continue;
168 omap_lock = to_omap_hwspinlock(lock);
169 kfree(omap_lock);
171 pm_runtime_disable(&pdev->dev);
172 iounmap_base:
173 iounmap(io_base);
174 free_state:
175 kfree(state);
176 return ret;
179 static int omap_hwspinlock_remove(struct platform_device *pdev)
181 struct omap_hwspinlock_state *state = platform_get_drvdata(pdev);
182 struct hwspinlock *lock;
183 struct omap_hwspinlock *omap_lock;
184 int i;
186 for (i = 0; i < state->num_locks; i++) {
187 lock = hwspin_lock_unregister(i);
188 /* this shouldn't happen at this point. if it does, at least
189 * don't continue with the remove */
190 if (!lock) {
191 dev_err(&pdev->dev, "%s: failed on %d\n", __func__, i);
192 return -EBUSY;
195 omap_lock = to_omap_hwspinlock(lock);
196 kfree(omap_lock);
199 pm_runtime_disable(&pdev->dev);
200 iounmap(state->io_base);
201 kfree(state);
203 return 0;
206 static struct platform_driver omap_hwspinlock_driver = {
207 .probe = omap_hwspinlock_probe,
208 .remove = omap_hwspinlock_remove,
209 .driver = {
210 .name = "omap_hwspinlock",
214 static int __init omap_hwspinlock_init(void)
216 return platform_driver_register(&omap_hwspinlock_driver);
218 /* board init code might need to reserve hwspinlocks for predefined purposes */
219 postcore_initcall(omap_hwspinlock_init);
221 static void __exit omap_hwspinlock_exit(void)
223 platform_driver_unregister(&omap_hwspinlock_driver);
225 module_exit(omap_hwspinlock_exit);
227 MODULE_LICENSE("GPL v2");
228 MODULE_DESCRIPTION("Hardware spinlock driver for OMAP");
229 MODULE_AUTHOR("Simon Que <sque@ti.com>");
230 MODULE_AUTHOR("Hari Kanigeri <h-kanigeri2@ti.com>");
231 MODULE_AUTHOR("Ohad Ben-Cohen <ohad@wizery.com>");