Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/upstream-linus
[linux-btrfs-devel.git] / drivers / staging / iio / dds / ad9834.h
blobed5ed8d0007ff4b9eb4e7a7afd4057464f4c0a9c
1 /*
2 * AD9833/AD9834/AD9837/AD9838 SPI DDS driver
4 * Copyright 2010-2011 Analog Devices Inc.
6 * Licensed under the GPL-2.
7 */
8 #ifndef IIO_DDS_AD9834_H_
9 #define IIO_DDS_AD9834_H_
11 /* Registers */
13 #define AD9834_REG_CMD (0 << 14)
14 #define AD9834_REG_FREQ0 (1 << 14)
15 #define AD9834_REG_FREQ1 (2 << 14)
16 #define AD9834_REG_PHASE0 (6 << 13)
17 #define AD9834_REG_PHASE1 (7 << 13)
19 /* Command Control Bits */
21 #define AD9834_B28 (1 << 13)
22 #define AD9834_HLB (1 << 12)
23 #define AD9834_FSEL (1 << 11)
24 #define AD9834_PSEL (1 << 10)
25 #define AD9834_PIN_SW (1 << 9)
26 #define AD9834_RESET (1 << 8)
27 #define AD9834_SLEEP1 (1 << 7)
28 #define AD9834_SLEEP12 (1 << 6)
29 #define AD9834_OPBITEN (1 << 5)
30 #define AD9834_SIGN_PIB (1 << 4)
31 #define AD9834_DIV2 (1 << 3)
32 #define AD9834_MODE (1 << 1)
34 #define AD9834_FREQ_BITS 28
35 #define AD9834_PHASE_BITS 12
37 #define RES_MASK(bits) ((1 << (bits)) - 1)
39 /**
40 * struct ad9834_state - driver instance specific data
41 * @spi: spi_device
42 * @reg: supply regulator
43 * @mclk: external master clock
44 * @control: cached control word
45 * @xfer: default spi transfer
46 * @msg: default spi message
47 * @freq_xfer: tuning word spi transfer
48 * @freq_msg: tuning word spi message
49 * @data: spi transmit buffer
50 * @freq_data: tuning word spi transmit buffer
53 struct ad9834_state {
54 struct spi_device *spi;
55 struct regulator *reg;
56 unsigned int mclk;
57 unsigned short control;
58 unsigned short devid;
59 struct spi_transfer xfer;
60 struct spi_message msg;
61 struct spi_transfer freq_xfer[2];
62 struct spi_message freq_msg;
65 * DMA (thus cache coherency maintenance) requires the
66 * transfer buffers to live in their own cache lines.
68 unsigned short data ____cacheline_aligned;
69 unsigned short freq_data[2] ;
74 * TODO: struct ad7887_platform_data needs to go into include/linux/iio
77 /**
78 * struct ad9834_platform_data - platform specific information
79 * @mclk: master clock in Hz
80 * @freq0: power up freq0 tuning word in Hz
81 * @freq1: power up freq1 tuning word in Hz
82 * @phase0: power up phase0 value [0..4095] correlates with 0..2PI
83 * @phase1: power up phase1 value [0..4095] correlates with 0..2PI
84 * @en_div2: digital output/2 is passed to the SIGN BIT OUT pin
85 * @en_signbit_msb_out: the MSB (or MSB/2) of the DAC data is connected to the
86 * SIGN BIT OUT pin. en_div2 controls whether it is the MSB
87 * or MSB/2 that is output. if en_signbit_msb_out=false,
88 * the on-board comparator is connected to SIGN BIT OUT
91 struct ad9834_platform_data {
92 unsigned int mclk;
93 unsigned int freq0;
94 unsigned int freq1;
95 unsigned short phase0;
96 unsigned short phase1;
97 bool en_div2;
98 bool en_signbit_msb_out;
102 * ad9834_supported_device_ids:
105 enum ad9834_supported_device_ids {
106 ID_AD9833,
107 ID_AD9834,
108 ID_AD9837,
109 ID_AD9838,
112 #endif /* IIO_DDS_AD9834_H_ */