1 /* $Id: nj_s.c,v 2.13.2.4 2004/01/16 01:53:48 keil Exp $
3 * This software may be used and distributed according to the terms
4 * of the GNU General Public License, incorporated herein by reference.
8 #include <linux/init.h>
12 #include <linux/pci.h>
13 #include <linux/interrupt.h>
14 #include <linux/ppp_defs.h>
17 static const char *NETjet_S_revision
= "$Revision: 2.13.2.4 $";
19 static u_char
dummyrr(struct IsdnCardState
*cs
, int chan
, u_char off
)
24 static void dummywr(struct IsdnCardState
*cs
, int chan
, u_char off
, u_char value
)
29 netjet_s_interrupt(int intno
, void *dev_id
)
31 struct IsdnCardState
*cs
= dev_id
;
32 u_char val
, s1val
, s0val
;
35 spin_lock_irqsave(&cs
->lock
, flags
);
36 s1val
= bytein(cs
->hw
.njet
.base
+ NETJET_IRQSTAT1
);
37 if (!(s1val
& NETJET_ISACIRQ
)) {
38 val
= NETjet_ReadIC(cs
, ISAC_ISTA
);
39 if (cs
->debug
& L1_DEB_ISAC
)
40 debugl1(cs
, "tiger: i1 %x %x", s1val
, val
);
42 isac_interrupt(cs
, val
);
43 NETjet_WriteIC(cs
, ISAC_MASK
, 0xFF);
44 NETjet_WriteIC(cs
, ISAC_MASK
, 0x0);
50 * read/write stat0 is better, because lower IRQ rate
51 * Note the IRQ is on for 125 us if a condition match
52 * thats long on modern CPU and so the IRQ is reentered
55 s0val
= bytein(cs
->hw
.njet
.base
+ NETJET_IRQSTAT0
);
56 if ((s0val
| s1val
)==0) { // shared IRQ
57 spin_unlock_irqrestore(&cs
->lock
, flags
);
61 byteout(cs
->hw
.njet
.base
+ NETJET_IRQSTAT0
, s0val
);
62 /* start new code 13/07/00 GE */
63 /* set bits in sval to indicate which page is free */
64 if (inl(cs
->hw
.njet
.base
+ NETJET_DMA_WRITE_ADR
) <
65 inl(cs
->hw
.njet
.base
+ NETJET_DMA_WRITE_IRQ
))
66 /* the 2nd write page is free */
68 else /* the 1st write page is free */
70 if (inl(cs
->hw
.njet
.base
+ NETJET_DMA_READ_ADR
) <
71 inl(cs
->hw
.njet
.base
+ NETJET_DMA_READ_IRQ
))
72 /* the 2nd read page is free */
74 else /* the 1st read page is free */
76 if (s0val
!= cs
->hw
.njet
.last_is0
) /* we have a DMA interrupt */
78 if (test_and_set_bit(FLG_LOCK_ATOMIC
, &cs
->HW_Flags
)) {
79 printk(KERN_WARNING
"nj LOCK_ATOMIC s0val %x->%x\n",
80 cs
->hw
.njet
.last_is0
, s0val
);
81 spin_unlock_irqrestore(&cs
->lock
, flags
);
84 cs
->hw
.njet
.irqstat0
= s0val
;
85 if ((cs
->hw
.njet
.irqstat0
& NETJET_IRQM0_READ
) !=
86 (cs
->hw
.njet
.last_is0
& NETJET_IRQM0_READ
))
87 /* we have a read dma int */
89 if ((cs
->hw
.njet
.irqstat0
& NETJET_IRQM0_WRITE
) !=
90 (cs
->hw
.njet
.last_is0
& NETJET_IRQM0_WRITE
))
91 /* we have a write dma int */
93 /* end new code 13/07/00 GE */
94 test_and_clear_bit(FLG_LOCK_ATOMIC
, &cs
->HW_Flags
);
96 spin_unlock_irqrestore(&cs
->lock
, flags
);
101 reset_netjet_s(struct IsdnCardState
*cs
)
103 cs
->hw
.njet
.ctrl_reg
= 0xff; /* Reset On */
104 byteout(cs
->hw
.njet
.base
+ NETJET_CTRL
, cs
->hw
.njet
.ctrl_reg
);
106 /* now edge triggered for TJ320 GE 13/07/00 */
107 /* see comment in IRQ function */
108 if (cs
->subtyp
) /* TJ320 */
109 cs
->hw
.njet
.ctrl_reg
= 0x40; /* Reset Off and status read clear */
111 cs
->hw
.njet
.ctrl_reg
= 0x00; /* Reset Off and status read clear */
112 byteout(cs
->hw
.njet
.base
+ NETJET_CTRL
, cs
->hw
.njet
.ctrl_reg
);
114 cs
->hw
.njet
.auxd
= 0;
115 cs
->hw
.njet
.dmactrl
= 0;
116 byteout(cs
->hw
.njet
.base
+ NETJET_AUXCTRL
, ~NETJET_ISACIRQ
);
117 byteout(cs
->hw
.njet
.base
+ NETJET_IRQMASK1
, NETJET_ISACIRQ
);
118 byteout(cs
->hw
.njet
.auxa
, cs
->hw
.njet
.auxd
);
122 NETjet_S_card_msg(struct IsdnCardState
*cs
, int mt
, void *arg
)
128 spin_lock_irqsave(&cs
->lock
, flags
);
130 spin_unlock_irqrestore(&cs
->lock
, flags
);
133 release_io_netjet(cs
);
138 spin_lock_irqsave(&cs
->lock
, flags
);
139 clear_pending_isac_ints(cs
);
141 /* Reenable all IRQ */
142 cs
->writeisac(cs
, ISAC_MASK
, 0);
143 spin_unlock_irqrestore(&cs
->lock
, flags
);
151 static int __devinit
njs_pci_probe(struct pci_dev
*dev_netjet
,
152 struct IsdnCardState
*cs
)
156 if (pci_enable_device(dev_netjet
))
158 pci_set_master(dev_netjet
);
159 cs
->irq
= dev_netjet
->irq
;
161 printk(KERN_WARNING
"NETjet-S: No IRQ for PCI card found\n");
164 cs
->hw
.njet
.base
= pci_resource_start(dev_netjet
, 0);
165 if (!cs
->hw
.njet
.base
) {
166 printk(KERN_WARNING
"NETjet-S: No IO-Adr for PCI card found\n");
169 /* the TJ300 and TJ320 must be detected, the IRQ handling is different
170 * unfortunately the chips use the same device ID, but the TJ320 has
171 * the bit20 in status PCI cfg register set
173 pci_read_config_dword(dev_netjet
, 0x04, &cfg
);
174 if (cfg
& 0x00100000)
175 cs
->subtyp
= 1; /* TJ320 */
177 cs
->subtyp
= 0; /* TJ300 */
178 /* 2001/10/04 Christoph Ersfeld, Formula-n Europe AG www.formula-n.com */
179 if ((dev_netjet
->subsystem_vendor
== 0x55) &&
180 (dev_netjet
->subsystem_device
== 0x02)) {
181 printk(KERN_WARNING
"Netjet: You tried to load this driver with an incompatible TigerJet-card\n");
182 printk(KERN_WARNING
"Use type=41 for Formula-n enter:now ISDN PCI and compatible\n");
190 static int __devinit
njs_cs_init(struct IsdnCard
*card
,
191 struct IsdnCardState
*cs
)
194 cs
->hw
.njet
.auxa
= cs
->hw
.njet
.base
+ NETJET_AUXDATA
;
195 cs
->hw
.njet
.isac
= cs
->hw
.njet
.base
| NETJET_ISAC_OFF
;
197 cs
->hw
.njet
.ctrl_reg
= 0xff; /* Reset On */
198 byteout(cs
->hw
.njet
.base
+ NETJET_CTRL
, cs
->hw
.njet
.ctrl_reg
);
201 cs
->hw
.njet
.ctrl_reg
= 0x00; /* Reset Off and status read clear */
202 byteout(cs
->hw
.njet
.base
+ NETJET_CTRL
, cs
->hw
.njet
.ctrl_reg
);
205 cs
->hw
.njet
.auxd
= 0xC0;
206 cs
->hw
.njet
.dmactrl
= 0;
208 byteout(cs
->hw
.njet
.base
+ NETJET_AUXCTRL
, ~NETJET_ISACIRQ
);
209 byteout(cs
->hw
.njet
.base
+ NETJET_IRQMASK1
, NETJET_ISACIRQ
);
210 byteout(cs
->hw
.njet
.auxa
, cs
->hw
.njet
.auxd
);
212 switch ( ( ( NETjet_ReadIC( cs
, ISAC_RBCH
) >> 5 ) & 3 ) )
215 return 1; /* end loop */
218 printk( KERN_WARNING
"NETjet-S: NETspider-U PCI card found\n" );
219 return -1; /* continue looping */
222 printk( KERN_WARNING
"NETjet-S: No PCI card found\n" );
223 return 0; /* end loop & function */
225 return 1; /* end loop */
228 static int __devinit
njs_cs_init_rest(struct IsdnCard
*card
,
229 struct IsdnCardState
*cs
)
231 const int bytecnt
= 256;
234 "NETjet-S: %s card configured at %#lx IRQ %d\n",
235 cs
->subtyp
? "TJ320" : "TJ300", cs
->hw
.njet
.base
, cs
->irq
);
236 if (!request_region(cs
->hw
.njet
.base
, bytecnt
, "netjet-s isdn")) {
238 "HiSax: NETjet-S config port %#lx-%#lx already in use\n",
240 cs
->hw
.njet
.base
+ bytecnt
);
243 cs
->readisac
= &NETjet_ReadIC
;
244 cs
->writeisac
= &NETjet_WriteIC
;
245 cs
->readisacfifo
= &NETjet_ReadICfifo
;
246 cs
->writeisacfifo
= &NETjet_WriteICfifo
;
247 cs
->BC_Read_Reg
= &dummyrr
;
248 cs
->BC_Write_Reg
= &dummywr
;
249 cs
->BC_Send_Data
= &netjet_fill_dma
;
251 cs
->cardmsg
= &NETjet_S_card_msg
;
252 cs
->irq_func
= &netjet_s_interrupt
;
253 cs
->irq_flags
|= IRQF_SHARED
;
254 ISACVersion(cs
, "NETjet-S:");
259 static struct pci_dev
*dev_netjet __devinitdata
= NULL
;
262 setup_netjet_s(struct IsdnCard
*card
)
265 struct IsdnCardState
*cs
= card
->cs
;
269 #error "not running on big endian machines now"
271 strcpy(tmp
, NETjet_S_revision
);
272 printk(KERN_INFO
"HiSax: Traverse Tech. NETjet-S driver Rev. %s\n", HiSax_getrev(tmp
));
273 if (cs
->typ
!= ISDN_CTYPE_NETJET_S
)
275 test_and_clear_bit(FLG_LOCK_ATOMIC
, &cs
->HW_Flags
);
279 if ((dev_netjet
= hisax_find_pci_device(PCI_VENDOR_ID_TIGERJET
,
280 PCI_DEVICE_ID_TIGERJET_300
, dev_netjet
))) {
281 ret
= njs_pci_probe(dev_netjet
, cs
);
285 printk(KERN_WARNING
"NETjet-S: No PCI card found\n");
289 ret
= njs_cs_init(card
, cs
);
294 /* otherwise, ret < 0, continue looping */
297 return njs_cs_init_rest(card
, cs
);