Make sure omap cpufreq driver initializes after cpufreq framework and governors

[linux-ginger.git] / drivers / watchdog / wdt_pci.c

/*
 *      Industrial Computer Source PCI-WDT500/501 driver
 *
 *      (c) Copyright 1996-1997 Alan Cox <alan@lxorguk.ukuu.org.uk>,
 *                                              All Rights Reserved.
 *
 *      This program is free software; you can redistribute it and/or
 *      modify it under the terms of the GNU General Public License
 *      as published by the Free Software Foundation; either version
 *      2 of the License, or (at your option) any later version.
 *
 *      Neither Alan Cox nor CymruNet Ltd. admit liability nor provide
 *      warranty for any of this software. This material is provided
 *      "AS-IS" and at no charge.
 *
 *      (c) Copyright 1995    Alan Cox <alan@lxorguk.ukuu.org.uk>
 *
 *      Release 0.10.
 *
 *      Fixes
 *              Dave Gregorich  :       Modularisation and minor bugs
 *              Alan Cox        :       Added the watchdog ioctl() stuff
 *              Alan Cox        :       Fixed the reboot problem (as noted by
 *                                      Matt Crocker).
 *              Alan Cox        :       Added wdt= boot option
 *              Alan Cox        :       Cleaned up copy/user stuff
 *              Tim Hockin      :       Added insmod parameters, comment cleanup
 *                                      Parameterized timeout
 *              JP Nollmann     :       Added support for PCI wdt501p
 *              Alan Cox        :       Split ISA and PCI cards into two drivers
 *              Jeff Garzik     :       PCI cleanups
 *              Tigran Aivazian :       Restructured wdtpci_init_one() to handle
 *                                      failures
 *              Joel Becker     :       Added WDIOC_GET/SETTIMEOUT
 *              Zwane Mwaikambo :       Magic char closing, locking changes,
 *                                      cleanups
 *              Matt Domsch     :       nowayout module option
 */

#include <linux/interrupt.h>
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/types.h>
#include <linux/miscdevice.h>
#include <linux/watchdog.h>
#include <linux/ioport.h>
#include <linux/delay.h>
#include <linux/notifier.h>
#include <linux/reboot.h>
#include <linux/init.h>
#include <linux/fs.h>
#include <linux/pci.h>
#include <linux/io.h>
#include <linux/uaccess.h>

#include <asm/system.h>

#define WDT_IS_PCI
#include "wd501p.h"

#define PFX "wdt_pci: "

/*
 * Until Access I/O gets their application for a PCI vendor ID approved,
 * I don't think that it's appropriate to move these constants into the
 * regular pci_ids.h file. -- JPN 2000/01/18
 */

#ifndef PCI_VENDOR_ID_ACCESSIO
#define PCI_VENDOR_ID_ACCESSIO 0x494f
#endif
#ifndef PCI_DEVICE_ID_WDG_CSM
#define PCI_DEVICE_ID_WDG_CSM 0x22c0
#endif

/* We can only use 1 card due to the /dev/watchdog restriction */
static int dev_count;

static unsigned long open_lock;
static DEFINE_SPINLOCK(wdtpci_lock);
static char expect_close;

static resource_size_t io;
static int irq;

/* Default timeout */
#define WD_TIMO 60                      /* Default heartbeat = 60 seconds */

static int heartbeat = WD_TIMO;
static int wd_heartbeat;
module_param(heartbeat, int, 0);
MODULE_PARM_DESC(heartbeat,
                "Watchdog heartbeat in seconds. (0<heartbeat<65536, default="
                                __MODULE_STRING(WD_TIMO) ")");

static int nowayout = WATCHDOG_NOWAYOUT;
module_param(nowayout, int, 0);
MODULE_PARM_DESC(nowayout,
                "Watchdog cannot be stopped once started (default="
                                __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");

/* Support for the Fan Tachometer on the PCI-WDT501 */
static int tachometer;
module_param(tachometer, int, 0);
MODULE_PARM_DESC(tachometer,
                "PCI-WDT501 Fan Tachometer support (0=disable, default=0)");

static int type = 500;
module_param(type, int, 0);
MODULE_PARM_DESC(type,
                "PCI-WDT501 Card type (500 or 501 , default=500)");

/*
 *      Programming support
 */

static void wdtpci_ctr_mode(int ctr, int mode)
{
        ctr <<= 6;
        ctr |= 0x30;
        ctr |= (mode << 1);
        outb(ctr, WDT_CR);
        udelay(8);
}

static void wdtpci_ctr_load(int ctr, int val)
{
        outb(val & 0xFF, WDT_COUNT0 + ctr);
        udelay(8);
        outb(val >> 8, WDT_COUNT0 + ctr);
        udelay(8);
}

/**
 *      wdtpci_start:
 *
 *      Start the watchdog driver.
 */

static int wdtpci_start(void)
{
        unsigned long flags;

        spin_lock_irqsave(&wdtpci_lock, flags);

        /*
         * "pet" the watchdog, as Access says.
         * This resets the clock outputs.
         */
        inb(WDT_DC);                    /* Disable watchdog */
        udelay(8);
        wdtpci_ctr_mode(2, 0);          /* Program CTR2 for Mode 0:
                                                Pulse on Terminal Count */
        outb(0, WDT_DC);                /* Enable watchdog */
        udelay(8);
        inb(WDT_DC);                    /* Disable watchdog */
        udelay(8);
        outb(0, WDT_CLOCK);             /* 2.0833MHz clock */
        udelay(8);
        inb(WDT_BUZZER);                /* disable */
        udelay(8);
        inb(WDT_OPTONOTRST);            /* disable */
        udelay(8);
        inb(WDT_OPTORST);               /* disable */
        udelay(8);
        inb(WDT_PROGOUT);               /* disable */
        udelay(8);
        wdtpci_ctr_mode(0, 3);          /* Program CTR0 for Mode 3:
                                                Square Wave Generator */
        wdtpci_ctr_mode(1, 2);          /* Program CTR1 for Mode 2:
                                                Rate Generator */
        wdtpci_ctr_mode(2, 1);          /* Program CTR2 for Mode 1:
                                                Retriggerable One-Shot */
        wdtpci_ctr_load(0, 20833);      /* count at 100Hz */
        wdtpci_ctr_load(1, wd_heartbeat);/* Heartbeat */
        /* DO NOT LOAD CTR2 on PCI card! -- JPN */
        outb(0, WDT_DC);                /* Enable watchdog */
        udelay(8);

        spin_unlock_irqrestore(&wdtpci_lock, flags);
        return 0;
}

/**
 *      wdtpci_stop:
 *
 *      Stop the watchdog driver.
 */

static int wdtpci_stop(void)
{
        unsigned long flags;

        /* Turn the card off */
        spin_lock_irqsave(&wdtpci_lock, flags);
        inb(WDT_DC);                    /* Disable watchdog */
        udelay(8);
        wdtpci_ctr_load(2, 0);          /* 0 length reset pulses now */
        spin_unlock_irqrestore(&wdtpci_lock, flags);
        return 0;
}

/**
 *      wdtpci_ping:
 *
 *      Reload counter one with the watchdog heartbeat. We don't bother
 *      reloading the cascade counter.
 */

static int wdtpci_ping(void)
{
        unsigned long flags;

        spin_lock_irqsave(&wdtpci_lock, flags);
        /* Write a watchdog value */
        inb(WDT_DC);                    /* Disable watchdog */
        udelay(8);
        wdtpci_ctr_mode(1, 2);          /* Re-Program CTR1 for Mode 2:
                                                        Rate Generator */
        wdtpci_ctr_load(1, wd_heartbeat);/* Heartbeat */
        outb(0, WDT_DC);                /* Enable watchdog */
        udelay(8);
        spin_unlock_irqrestore(&wdtpci_lock, flags);
        return 0;
}

/**
 *      wdtpci_set_heartbeat:
 *      @t:             the new heartbeat value that needs to be set.
 *
 *      Set a new heartbeat value for the watchdog device. If the heartbeat
 *      value is incorrect we keep the old value and return -EINVAL.
 *      If successful we return 0.
 */
static int wdtpci_set_heartbeat(int t)
{
        /* Arbitrary, can't find the card's limits */
        if (t < 1 || t > 65535)
                return -EINVAL;

        heartbeat = t;
        wd_heartbeat = t * 100;
        return 0;
}

/**
 *      wdtpci_get_status:
 *      @status:                the new status.
 *
 *      Extract the status information from a WDT watchdog device. There are
 *      several board variants so we have to know which bits are valid. Some
 *      bits default to one and some to zero in order to be maximally painful.
 *
 *      we then map the bits onto the status ioctl flags.
 */

static int wdtpci_get_status(int *status)
{
        unsigned char new_status;
        unsigned long flags;

        spin_lock_irqsave(&wdtpci_lock, flags);
        new_status = inb(WDT_SR);
        spin_unlock_irqrestore(&wdtpci_lock, flags);

        *status = 0;
        if (new_status & WDC_SR_ISOI0)
                *status |= WDIOF_EXTERN1;
        if (new_status & WDC_SR_ISII1)
                *status |= WDIOF_EXTERN2;
        if (type == 501) {
                if (!(new_status & WDC_SR_TGOOD))
                        *status |= WDIOF_OVERHEAT;
                if (!(new_status & WDC_SR_PSUOVER))
                        *status |= WDIOF_POWEROVER;
                if (!(new_status & WDC_SR_PSUUNDR))
                        *status |= WDIOF_POWERUNDER;
                if (tachometer) {
                        if (!(new_status & WDC_SR_FANGOOD))
                                *status |= WDIOF_FANFAULT;
                }
        }
        return 0;
}

/**
 *      wdtpci_get_temperature:
 *
 *      Reports the temperature in degrees Fahrenheit. The API is in
 *      farenheit. It was designed by an imperial measurement luddite.
 */

static int wdtpci_get_temperature(int *temperature)
{
        unsigned short c;
        unsigned long flags;
        spin_lock_irqsave(&wdtpci_lock, flags);
        c = inb(WDT_RT);
        udelay(8);
        spin_unlock_irqrestore(&wdtpci_lock, flags);
        *temperature = (c * 11 / 15) + 7;
        return 0;
}

/**
 *      wdtpci_interrupt:
 *      @irq:           Interrupt number
 *      @dev_id:        Unused as we don't allow multiple devices.
 *
 *      Handle an interrupt from the board. These are raised when the status
 *      map changes in what the board considers an interesting way. That means
 *      a failure condition occurring.
 */

static irqreturn_t wdtpci_interrupt(int irq, void *dev_id)
{
        /*
         *      Read the status register see what is up and
         *      then printk it.
         */
        unsigned char status;

        spin_lock(&wdtpci_lock);

        status = inb(WDT_SR);
        udelay(8);

        printk(KERN_CRIT PFX "status %d\n", status);

        if (type == 501) {
                if (!(status & WDC_SR_TGOOD)) {
                        printk(KERN_CRIT PFX "Overheat alarm.(%d)\n",
                                                                inb(WDT_RT));
                        udelay(8);
                }
                if (!(status & WDC_SR_PSUOVER))
                        printk(KERN_CRIT PFX "PSU over voltage.\n");
                if (!(status & WDC_SR_PSUUNDR))
                        printk(KERN_CRIT PFX "PSU under voltage.\n");
                if (tachometer) {
                        if (!(status & WDC_SR_FANGOOD))
                                printk(KERN_CRIT PFX "Possible fan fault.\n");
                }
        }
        if (!(status & WDC_SR_WCCR)) {
#ifdef SOFTWARE_REBOOT
#ifdef ONLY_TESTING
                printk(KERN_CRIT PFX "Would Reboot.\n");
#else
                printk(KERN_CRIT PFX "Initiating system reboot.\n");
                emergency_restart(NULL);
#endif
#else
                printk(KERN_CRIT PFX "Reset in 5ms.\n");
#endif
        }
        spin_unlock(&wdtpci_lock);
        return IRQ_HANDLED;
}


/**
 *      wdtpci_write:
 *      @file: file handle to the watchdog
 *      @buf: buffer to write (unused as data does not matter here
 *      @count: count of bytes
 *      @ppos: pointer to the position to write. No seeks allowed
 *
 *      A write to a watchdog device is defined as a keepalive signal. Any
 *      write of data will do, as we we don't define content meaning.
 */

static ssize_t wdtpci_write(struct file *file, const char __user *buf,
                                                size_t count, loff_t *ppos)
{
        if (count) {
                if (!nowayout) {
                        size_t i;

                        /* In case it was set long ago */
                        expect_close = 0;

                        for (i = 0; i != count; i++) {
                                char c;
                                if (get_user(c, buf + i))
                                        return -EFAULT;
                                if (c == 'V')
                                        expect_close = 42;
                        }
                }
                wdtpci_ping();
        }
        return count;
}

/**
 *      wdtpci_ioctl:
 *      @file: file handle to the device
 *      @cmd: watchdog command
 *      @arg: argument pointer
 *
 *      The watchdog API defines a common set of functions for all watchdogs
 *      according to their available features. We only actually usefully support
 *      querying capabilities and current status.
 */

static long wdtpci_ioctl(struct file *file, unsigned int cmd,
                                                        unsigned long arg)
{
        void __user *argp = (void __user *)arg;
        int __user *p = argp;
        int new_heartbeat;
        int status;

        static struct watchdog_info ident = {
                .options =              WDIOF_SETTIMEOUT|
                                        WDIOF_MAGICCLOSE|
                                        WDIOF_KEEPALIVEPING,
                .firmware_version =     1,
                .identity =             "PCI-WDT500/501",
        };

        /* Add options according to the card we have */
        ident.options |= (WDIOF_EXTERN1|WDIOF_EXTERN2);
        if (type == 501) {
                ident.options |= (WDIOF_OVERHEAT|WDIOF_POWERUNDER|
                                                        WDIOF_POWEROVER);
                if (tachometer)
                        ident.options |= WDIOF_FANFAULT;
        }

        switch (cmd) {
        case WDIOC_GETSUPPORT:
                return copy_to_user(argp, &ident, sizeof(ident)) ? -EFAULT : 0;
        case WDIOC_GETSTATUS:
                wdtpci_get_status(&status);
                return put_user(status, p);
        case WDIOC_GETBOOTSTATUS:
                return put_user(0, p);
        case WDIOC_KEEPALIVE:
                wdtpci_ping();
                return 0;
        case WDIOC_SETTIMEOUT:
                if (get_user(new_heartbeat, p))
                        return -EFAULT;
                if (wdtpci_set_heartbeat(new_heartbeat))
                        return -EINVAL;
                wdtpci_ping();
                /* Fall */
        case WDIOC_GETTIMEOUT:
                return put_user(heartbeat, p);
        default:
                return -ENOTTY;
        }
}

/**
 *      wdtpci_open:
 *      @inode: inode of device
 *      @file: file handle to device
 *
 *      The watchdog device has been opened. The watchdog device is single
 *      open and on opening we load the counters. Counter zero is a 100Hz
 *      cascade, into counter 1 which downcounts to reboot. When the counter
 *      triggers counter 2 downcounts the length of the reset pulse which
 *      set set to be as long as possible.
 */

static int wdtpci_open(struct inode *inode, struct file *file)
{
        if (test_and_set_bit(0, &open_lock))
                return -EBUSY;

        if (nowayout)
                __module_get(THIS_MODULE);
        /*
         *      Activate
         */
        wdtpci_start();
        return nonseekable_open(inode, file);
}

/**
 *      wdtpci_release:
 *      @inode: inode to board
 *      @file: file handle to board
 *
 *      The watchdog has a configurable API. There is a religious dispute
 *      between people who want their watchdog to be able to shut down and
 *      those who want to be sure if the watchdog manager dies the machine
 *      reboots. In the former case we disable the counters, in the latter
 *      case you have to open it again very soon.
 */

static int wdtpci_release(struct inode *inode, struct file *file)
{
        if (expect_close == 42) {
                wdtpci_stop();
        } else {
                printk(KERN_CRIT PFX "Unexpected close, not stopping timer!");
                wdtpci_ping();
        }
        expect_close = 0;
        clear_bit(0, &open_lock);
        return 0;
}

/**
 *      wdtpci_temp_read:
 *      @file: file handle to the watchdog board
 *      @buf: buffer to write 1 byte into
 *      @count: length of buffer
 *      @ptr: offset (no seek allowed)
 *
 *      Read reports the temperature in degrees Fahrenheit. The API is in
 *      fahrenheit. It was designed by an imperial measurement luddite.
 */

static ssize_t wdtpci_temp_read(struct file *file, char __user *buf,
                                                size_t count, loff_t *ptr)
{
        int temperature;

        if (wdtpci_get_temperature(&temperature))
                return -EFAULT;

        if (copy_to_user(buf, &temperature, 1))
                return -EFAULT;

        return 1;
}

/**
 *      wdtpci_temp_open:
 *      @inode: inode of device
 *      @file: file handle to device
 *
 *      The temperature device has been opened.
 */

static int wdtpci_temp_open(struct inode *inode, struct file *file)
{
        return nonseekable_open(inode, file);
}

/**
 *      wdtpci_temp_release:
 *      @inode: inode to board
 *      @file: file handle to board
 *
 *      The temperature device has been closed.
 */

static int wdtpci_temp_release(struct inode *inode, struct file *file)
{
        return 0;
}

/**
 *      notify_sys:
 *      @this: our notifier block
 *      @code: the event being reported
 *      @unused: unused
 *
 *      Our notifier is called on system shutdowns. We want to turn the card
 *      off at reboot otherwise the machine will reboot again during memory
 *      test or worse yet during the following fsck. This would suck, in fact
 *      trust me - if it happens it does suck.
 */

static int wdtpci_notify_sys(struct notifier_block *this, unsigned long code,
                                                        void *unused)
{
        if (code == SYS_DOWN || code == SYS_HALT)
                wdtpci_stop();
        return NOTIFY_DONE;
}

/*
 *      Kernel Interfaces
 */


static const struct file_operations wdtpci_fops = {
        .owner          = THIS_MODULE,
        .llseek         = no_llseek,
        .write          = wdtpci_write,
        .unlocked_ioctl = wdtpci_ioctl,
        .open           = wdtpci_open,
        .release        = wdtpci_release,
};

static struct miscdevice wdtpci_miscdev = {
        .minor  = WATCHDOG_MINOR,
        .name   = "watchdog",
        .fops   = &wdtpci_fops,
};

static const struct file_operations wdtpci_temp_fops = {
        .owner          = THIS_MODULE,
        .llseek         = no_llseek,
        .read           = wdtpci_temp_read,
        .open           = wdtpci_temp_open,
        .release        = wdtpci_temp_release,
};

static struct miscdevice temp_miscdev = {
        .minor  = TEMP_MINOR,
        .name   = "temperature",
        .fops   = &wdtpci_temp_fops,
};

/*
 *      The WDT card needs to learn about soft shutdowns in order to
 *      turn the timebomb registers off.
 */

static struct notifier_block wdtpci_notifier = {
        .notifier_call = wdtpci_notify_sys,
};


static int __devinit wdtpci_init_one(struct pci_dev *dev,
                                        const struct pci_device_id *ent)
{
        int ret = -EIO;

        dev_count++;
        if (dev_count > 1) {
                printk(KERN_ERR PFX "This driver only supports one device\n");
                return -ENODEV;
        }

        if (type != 500 && type != 501) {
                printk(KERN_ERR PFX "unknown card type '%d'.\n", type);
                return -ENODEV;
        }

        if (pci_enable_device(dev)) {
                printk(KERN_ERR PFX "Not possible to enable PCI Device\n");
                return -ENODEV;
        }

        if (pci_resource_start(dev, 2) == 0x0000) {
                printk(KERN_ERR PFX "No I/O-Address for card detected\n");
                ret = -ENODEV;
                goto out_pci;
        }

        if (pci_request_region(dev, 2, "wdt_pci")) {
                printk(KERN_ERR PFX "I/O address 0x%llx already in use\n",
                        (unsigned long long)pci_resource_start(dev, 2));
                goto out_pci;
        }

        irq = dev->irq;
        io = pci_resource_start(dev, 2);

        if (request_irq(irq, wdtpci_interrupt, IRQF_DISABLED | IRQF_SHARED,
                         "wdt_pci", &wdtpci_miscdev)) {
                printk(KERN_ERR PFX "IRQ %d is not free\n", irq);
                goto out_reg;
        }

        printk(KERN_INFO
         "PCI-WDT500/501 (PCI-WDG-CSM) driver 0.10 at 0x%llx (Interrupt %d)\n",
                                        (unsigned long long)io, irq);

        /* Check that the heartbeat value is within its range;
           if not reset to the default */
        if (wdtpci_set_heartbeat(heartbeat)) {
                wdtpci_set_heartbeat(WD_TIMO);
                printk(KERN_INFO PFX
                  "heartbeat value must be 0 < heartbeat < 65536, using %d\n",
                                                                WD_TIMO);
        }

        ret = register_reboot_notifier(&wdtpci_notifier);
        if (ret) {
                printk(KERN_ERR PFX
                        "cannot register reboot notifier (err=%d)\n", ret);
                goto out_irq;
        }

        if (type == 501) {
                ret = misc_register(&temp_miscdev);
                if (ret) {
                        printk(KERN_ERR PFX
                        "cannot register miscdev on minor=%d (err=%d)\n",
                                                        TEMP_MINOR, ret);
                        goto out_rbt;
                }
        }

        ret = misc_register(&wdtpci_miscdev);
        if (ret) {
                printk(KERN_ERR PFX
                        "cannot register miscdev on minor=%d (err=%d)\n",
                                                WATCHDOG_MINOR, ret);
                goto out_misc;
        }

        printk(KERN_INFO PFX "initialized. heartbeat=%d sec (nowayout=%d)\n",
                heartbeat, nowayout);
        if (type == 501)
                printk(KERN_INFO "wdt: Fan Tachometer is %s\n",
                                (tachometer ? "Enabled" : "Disabled"));

        ret = 0;
out:
        return ret;

out_misc:
        if (type == 501)
                misc_deregister(&temp_miscdev);
out_rbt:
        unregister_reboot_notifier(&wdtpci_notifier);
out_irq:
        free_irq(irq, &wdtpci_miscdev);
out_reg:
        pci_release_region(dev, 2);
out_pci:
        pci_disable_device(dev);
        goto out;
}


static void __devexit wdtpci_remove_one(struct pci_dev *pdev)
{
        /* here we assume only one device will ever have
         * been picked up and registered by probe function */
        misc_deregister(&wdtpci_miscdev);
        if (type == 501)
                misc_deregister(&temp_miscdev);
        unregister_reboot_notifier(&wdtpci_notifier);
        free_irq(irq, &wdtpci_miscdev);
        pci_release_region(pdev, 2);
        pci_disable_device(pdev);
        dev_count--;
}


static struct pci_device_id wdtpci_pci_tbl[] = {
        {
                .vendor    = PCI_VENDOR_ID_ACCESSIO,
                .device    = PCI_DEVICE_ID_WDG_CSM,
                .subvendor = PCI_ANY_ID,
                .subdevice = PCI_ANY_ID,
        },
        { 0, }, /* terminate list */
};
MODULE_DEVICE_TABLE(pci, wdtpci_pci_tbl);


static struct pci_driver wdtpci_driver = {
        .name           = "wdt_pci",
        .id_table       = wdtpci_pci_tbl,
        .probe          = wdtpci_init_one,
        .remove         = __devexit_p(wdtpci_remove_one),
};


/**
 *      wdtpci_cleanup:
 *
 *      Unload the watchdog. You cannot do this with any file handles open.
 *      If your watchdog is set to continue ticking on close and you unload
 *      it, well it keeps ticking. We won't get the interrupt but the board
 *      will not touch PC memory so all is fine. You just have to load a new
 *      module in xx seconds or reboot.
 */

static void __exit wdtpci_cleanup(void)
{
        pci_unregister_driver(&wdtpci_driver);
}


/**
 *      wdtpci_init:
 *
 *      Set up the WDT watchdog board. All we have to do is grab the
 *      resources we require and bitch if anyone beat us to them.
 *      The open() function will actually kick the board off.
 */

static int __init wdtpci_init(void)
{
        return pci_register_driver(&wdtpci_driver);
}


module_init(wdtpci_init);
module_exit(wdtpci_cleanup);

MODULE_AUTHOR("JP Nollmann, Alan Cox");
MODULE_DESCRIPTION("Driver for the ICS PCI-WDT500/501 watchdog cards");
MODULE_LICENSE("GPL");
MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
MODULE_ALIAS_MISCDEV(TEMP_MINOR);