Full support for Ginger Console
[linux-ginger.git] / arch / powerpc / boot / dts / mpc8569mds.dts
blob06332d61830a094e181f3790e4314c007d9ef0df
1 /*
2  * MPC8569E MDS Device Tree Source
3  *
4  * Copyright (C) 2009 Freescale Semiconductor Inc.
5  *
6  * This program is free software; you can redistribute  it and/or modify it
7  * under  the terms of  the GNU General  Public License as published by the
8  * Free Software Foundation;  either version 2 of the  License, or (at your
9  * option) any later version.
10  */
12 /dts-v1/;
14 / {
15         model = "MPC8569EMDS";
16         compatible = "fsl,MPC8569EMDS";
17         #address-cells = <1>;
18         #size-cells = <1>;
20         aliases {
21                 serial0 = &serial0;
22                 serial1 = &serial1;
23                 ethernet0 = &enet0;
24                 ethernet1 = &enet1;
25                 ethernet2 = &enet2;
26                 ethernet3 = &enet3;
27                 ethernet5 = &enet5;
28                 ethernet7 = &enet7;
29                 pci1 = &pci1;
30                 rapidio0 = &rio0;
31         };
33         cpus {
34                 #address-cells = <1>;
35                 #size-cells = <0>;
37                 PowerPC,8569@0 {
38                         device_type = "cpu";
39                         reg = <0x0>;
40                         d-cache-line-size = <32>;       // 32 bytes
41                         i-cache-line-size = <32>;       // 32 bytes
42                         d-cache-size = <0x8000>;                // L1, 32K
43                         i-cache-size = <0x8000>;                // L1, 32K
44                         timebase-frequency = <0>;
45                         bus-frequency = <0>;
46                         clock-frequency = <0>;
47                         next-level-cache = <&L2>;
48                 };
49         };
51         memory {
52                 device_type = "memory";
53         };
55         localbus@e0005000 {
56                 #address-cells = <2>;
57                 #size-cells = <1>;
58                 compatible = "fsl,mpc8569-elbc", "fsl,elbc", "simple-bus";
59                 reg = <0xe0005000 0x1000>;
60                 interrupts = <19 2>;
61                 interrupt-parent = <&mpic>;
63                 ranges = <0x0 0x0 0xfe000000 0x02000000
64                           0x1 0x0 0xf8000000 0x00008000
65                           0x2 0x0 0xf0000000 0x04000000
66                           0x3 0x0 0xfc000000 0x00008000
67                           0x4 0x0 0xf8008000 0x00008000
68                           0x5 0x0 0xf8010000 0x00008000>;
70                 nor@0,0 {
71                         #address-cells = <1>;
72                         #size-cells = <1>;
73                         compatible = "cfi-flash";
74                         reg = <0x0 0x0 0x02000000>;
75                         bank-width = <1>;
76                         device-width = <1>;
77                         partition@0 {
78                                 label = "ramdisk";
79                                 reg = <0x00000000 0x01c00000>;
80                         };
81                         partition@1c00000 {
82                                 label = "kernel";
83                                 reg = <0x01c00000 0x002e0000>;
84                         };
85                         partiton@1ee0000 {
86                                 label = "dtb";
87                                 reg = <0x01ee0000 0x00020000>;
88                         };
89                         partition@1f00000 {
90                                 label = "firmware";
91                                 reg = <0x01f00000 0x00080000>;
92                                 read-only;
93                         };
94                         partition@1f80000 {
95                                 label = "u-boot";
96                                 reg = <0x01f80000 0x00080000>;
97                                 read-only;
98                         };
99                 };
101                 bcsr@1,0 {
102                         #address-cells = <1>;
103                         #size-cells = <1>;
104                         compatible = "fsl,mpc8569mds-bcsr";
105                         reg = <1 0 0x8000>;
106                         ranges = <0 1 0 0x8000>;
108                         bcsr17: gpio-controller@11 {
109                                 #gpio-cells = <2>;
110                                 compatible = "fsl,mpc8569mds-bcsr-gpio";
111                                 reg = <0x11 0x1>;
112                                 gpio-controller;
113                         };
114                 };
116                 nand@3,0 {
117                         compatible = "fsl,mpc8569-fcm-nand",
118                                      "fsl,elbc-fcm-nand";
119                         reg = <3 0 0x8000>;
120                 };
122                 pib@4,0 {
123                         compatible = "fsl,mpc8569mds-pib";
124                         reg = <4 0 0x8000>;
125                 };
127                 pib@5,0 {
128                         compatible = "fsl,mpc8569mds-pib";
129                         reg = <5 0 0x8000>;
130                 };
131         };
133         soc@e0000000 {
134                 #address-cells = <1>;
135                 #size-cells = <1>;
136                 device_type = "soc";
137                 compatible = "fsl,mpc8569-immr", "simple-bus";
138                 ranges = <0x0 0xe0000000 0x100000>;
139                 bus-frequency = <0>;
141                 ecm-law@0 {
142                         compatible = "fsl,ecm-law";
143                         reg = <0x0 0x1000>;
144                         fsl,num-laws = <10>;
145                 };
147                 ecm@1000 {
148                         compatible = "fsl,mpc8569-ecm", "fsl,ecm";
149                         reg = <0x1000 0x1000>;
150                         interrupts = <17 2>;
151                         interrupt-parent = <&mpic>;
152                 };
154                 memory-controller@2000 {
155                         compatible = "fsl,mpc8569-memory-controller";
156                         reg = <0x2000 0x1000>;
157                         interrupt-parent = <&mpic>;
158                         interrupts = <18 2>;
159                 };
161                 i2c@3000 {
162                         #address-cells = <1>;
163                         #size-cells = <0>;
164                         cell-index = <0>;
165                         compatible = "fsl-i2c";
166                         reg = <0x3000 0x100>;
167                         interrupts = <43 2>;
168                         interrupt-parent = <&mpic>;
169                         dfsrr;
171                         rtc@68 {
172                                 compatible = "dallas,ds1374";
173                                 reg = <0x68>;
174                         };
175                 };
177                 i2c@3100 {
178                         #address-cells = <1>;
179                         #size-cells = <0>;
180                         cell-index = <1>;
181                         compatible = "fsl-i2c";
182                         reg = <0x3100 0x100>;
183                         interrupts = <43 2>;
184                         interrupt-parent = <&mpic>;
185                         dfsrr;
186                 };
188                 serial0: serial@4500 {
189                         cell-index = <0>;
190                         device_type = "serial";
191                         compatible = "ns16550";
192                         reg = <0x4500 0x100>;
193                         clock-frequency = <0>;
194                         interrupts = <42 2>;
195                         interrupt-parent = <&mpic>;
196                 };
198                 serial1: serial@4600 {
199                         cell-index = <1>;
200                         device_type = "serial";
201                         compatible = "ns16550";
202                         reg = <0x4600 0x100>;
203                         clock-frequency = <0>;
204                         interrupts = <42 2>;
205                         interrupt-parent = <&mpic>;
206                 };
208                 L2: l2-cache-controller@20000 {
209                         compatible = "fsl,mpc8569-l2-cache-controller";
210                         reg = <0x20000 0x1000>;
211                         cache-line-size = <32>; // 32 bytes
212                         cache-size = <0x80000>; // L2, 512K
213                         interrupt-parent = <&mpic>;
214                         interrupts = <16 2>;
215                 };
217                 dma@21300 {
218                         #address-cells = <1>;
219                         #size-cells = <1>;
220                         compatible = "fsl,mpc8569-dma", "fsl,eloplus-dma";
221                         reg = <0x21300 0x4>;
222                         ranges = <0x0 0x21100 0x200>;
223                         cell-index = <0>;
224                         dma-channel@0 {
225                                 compatible = "fsl,mpc8569-dma-channel",
226                                                 "fsl,eloplus-dma-channel";
227                                 reg = <0x0 0x80>;
228                                 cell-index = <0>;
229                                 interrupt-parent = <&mpic>;
230                                 interrupts = <20 2>;
231                         };
232                         dma-channel@80 {
233                                 compatible = "fsl,mpc8569-dma-channel",
234                                                 "fsl,eloplus-dma-channel";
235                                 reg = <0x80 0x80>;
236                                 cell-index = <1>;
237                                 interrupt-parent = <&mpic>;
238                                 interrupts = <21 2>;
239                         };
240                         dma-channel@100 {
241                                 compatible = "fsl,mpc8569-dma-channel",
242                                                 "fsl,eloplus-dma-channel";
243                                 reg = <0x100 0x80>;
244                                 cell-index = <2>;
245                                 interrupt-parent = <&mpic>;
246                                 interrupts = <22 2>;
247                         };
248                         dma-channel@180 {
249                                 compatible = "fsl,mpc8569-dma-channel",
250                                                 "fsl,eloplus-dma-channel";
251                                 reg = <0x180 0x80>;
252                                 cell-index = <3>;
253                                 interrupt-parent = <&mpic>;
254                                 interrupts = <23 2>;
255                         };
256                 };
258                 sdhci@2e000 {
259                         compatible = "fsl,mpc8569-esdhc", "fsl,esdhc";
260                         reg = <0x2e000 0x1000>;
261                         interrupts = <72 0x8>;
262                         interrupt-parent = <&mpic>;
263                         /* Filled in by U-Boot */
264                         clock-frequency = <0>;
265                         status = "disabled";
266                         sdhci,1-bit-only;
267                 };
269                 crypto@30000 {
270                         compatible = "fsl,sec3.1", "fsl,sec3.0", "fsl,sec2.4",
271                                 "fsl,sec2.2", "fsl,sec2.1", "fsl,sec2.0";
272                         reg = <0x30000 0x10000>;
273                         interrupts = <45 2 58 2>;
274                         interrupt-parent = <&mpic>;
275                         fsl,num-channels = <4>;
276                         fsl,channel-fifo-len = <24>;
277                         fsl,exec-units-mask = <0xbfe>;
278                         fsl,descriptor-types-mask = <0x3ab0ebf>;
279                 };
281                 mpic: pic@40000 {
282                         interrupt-controller;
283                         #address-cells = <0>;
284                         #interrupt-cells = <2>;
285                         reg = <0x40000 0x40000>;
286                         compatible = "chrp,open-pic";
287                         device_type = "open-pic";
288                 };
290                 msi@41600 {
291                         compatible = "fsl,mpc8568-msi", "fsl,mpic-msi";
292                         reg = <0x41600 0x80>;
293                         msi-available-ranges = <0 0x100>;
294                         interrupts = <
295                                 0xe0 0
296                                 0xe1 0
297                                 0xe2 0
298                                 0xe3 0
299                                 0xe4 0
300                                 0xe5 0
301                                 0xe6 0
302                                 0xe7 0>;
303                         interrupt-parent = <&mpic>;
304                 };
306                 global-utilities@e0000 {
307                         compatible = "fsl,mpc8569-guts";
308                         reg = <0xe0000 0x1000>;
309                         fsl,has-rstcr;
310                 };
312                 par_io@e0100 {
313                         #address-cells = <1>;
314                         #size-cells = <1>;
315                         reg = <0xe0100 0x100>;
316                         ranges = <0x0 0xe0100 0x100>;
317                         device_type = "par_io";
318                         num-ports = <7>;
320                         qe_pio_e: gpio-controller@80 {
321                                 #gpio-cells = <2>;
322                                 compatible = "fsl,mpc8569-qe-pario-bank",
323                                              "fsl,mpc8323-qe-pario-bank";
324                                 reg = <0x80 0x18>;
325                                 gpio-controller;
326                         };
328                         qe_pio_f: gpio-controller@a0 {
329                                 #gpio-cells = <2>;
330                                 compatible = "fsl,mpc8569-qe-pario-bank",
331                                              "fsl,mpc8323-qe-pario-bank";
332                                 reg = <0xa0 0x18>;
333                                 gpio-controller;
334                         };
336                         pio1: ucc_pin@01 {
337                                 pio-map = <
338                         /* port  pin  dir  open_drain  assignment  has_irq */
339                                         0x2  0x1f 0x1  0x0  0x1  0x0    /* QE_MUX_MDC */
340                                         0x2  0x1e 0x3  0x0  0x2  0x0    /* QE_MUX_MDIO */
341                                         0x2  0x0b 0x2  0x0  0x1  0x0    /* CLK12*/
342                                         0x0  0x0  0x1  0x0  0x3  0x0    /* ENET1_TXD0_SER1_TXD0 */
343                                         0x0  0x1  0x1  0x0  0x3  0x0    /* ENET1_TXD1_SER1_TXD1 */
344                                         0x0  0x2  0x1  0x0  0x1  0x0    /* ENET1_TXD2_SER1_TXD2 */
345                                         0x0  0x3  0x1  0x0  0x2  0x0    /* ENET1_TXD3_SER1_TXD3 */
346                                         0x0  0x6  0x2  0x0  0x3  0x0    /* ENET1_RXD0_SER1_RXD0 */
347                                         0x0  0x7  0x2  0x0  0x1  0x0    /* ENET1_RXD1_SER1_RXD1 */
348                                         0x0  0x8  0x2  0x0  0x2  0x0    /* ENET1_RXD2_SER1_RXD2 */
349                                         0x0  0x9  0x2  0x0  0x2  0x0    /* ENET1_RXD3_SER1_RXD3 */
350                                         0x0  0x4  0x1  0x0  0x2  0x0    /* ENET1_TX_EN_SER1_RTS_B */
351                                         0x0  0xc  0x2  0x0  0x3  0x0    /* ENET1_RX_DV_SER1_CTS_B */
352                                         0x2  0x8  0x2  0x0  0x1  0x0    /* ENET1_GRXCLK */
353                                         0x2  0x14 0x1  0x0  0x2  0x0>;  /* ENET1_GTXCLK */
354                         };
356                         pio2: ucc_pin@02 {
357                                 pio-map = <
358                         /* port  pin  dir  open_drain  assignment  has_irq */
359                                         0x2  0x1f 0x1  0x0  0x1  0x0    /* QE_MUX_MDC */
360                                         0x2  0x1e 0x3  0x0  0x2  0x0    /* QE_MUX_MDIO */
361                                         0x2  0x10 0x2  0x0  0x3  0x0    /* CLK17 */
362                                         0x0  0xe  0x1  0x0  0x2  0x0    /* ENET2_TXD0_SER2_TXD0 */
363                                         0x0  0xf  0x1  0x0  0x2  0x0    /* ENET2_TXD1_SER2_TXD1 */
364                                         0x0  0x10 0x1  0x0  0x1  0x0    /* ENET2_TXD2_SER2_TXD2 */
365                                         0x0  0x11 0x1  0x0  0x1  0x0    /* ENET2_TXD3_SER2_TXD3 */
366                                         0x0  0x14 0x2  0x0  0x2  0x0    /* ENET2_RXD0_SER2_RXD0 */
367                                         0x0  0x15 0x2  0x0  0x1  0x0    /* ENET2_RXD1_SER2_RXD1 */
368                                         0x0  0x16 0x2  0x0  0x1  0x0    /* ENET2_RXD2_SER2_RXD2 */
369                                         0x0  0x17 0x2  0x0  0x1  0x0    /* ENET2_RXD3_SER2_RXD3 */
370                                         0x0  0x12 0x1  0x0  0x2  0x0    /* ENET2_TX_EN_SER2_RTS_B */
371                                         0x0  0x1a 0x2  0x0  0x3  0x0    /* ENET2_RX_DV_SER2_CTS_B */
372                                         0x2  0x3  0x2  0x0  0x1  0x0    /* ENET2_GRXCLK */
373                                         0x2  0x2 0x1  0x0  0x2  0x0>;   /* ENET2_GTXCLK */
374                         };
376                         pio3: ucc_pin@03 {
377                                 pio-map = <
378                         /* port  pin  dir  open_drain  assignment  has_irq */
379                                         0x2  0x1f 0x1  0x0  0x1  0x0    /* QE_MUX_MDC */
380                                         0x2  0x1e 0x3  0x0  0x2  0x0    /* QE_MUX_MDIO */
381                                         0x2  0x0b 0x2  0x0  0x1  0x0    /* CLK12*/
382                                         0x0  0x1d 0x1  0x0  0x2  0x0    /* ENET3_TXD0_SER3_TXD0 */
383                                         0x0  0x1e 0x1  0x0  0x3  0x0    /* ENET3_TXD1_SER3_TXD1 */
384                                         0x0  0x1f 0x1  0x0  0x2  0x0    /* ENET3_TXD2_SER3_TXD2 */
385                                         0x1  0x0  0x1  0x0  0x3  0x0    /* ENET3_TXD3_SER3_TXD3 */
386                                         0x1  0x3  0x2  0x0  0x3  0x0    /* ENET3_RXD0_SER3_RXD0 */
387                                         0x1  0x4  0x2  0x0  0x1  0x0    /* ENET3_RXD1_SER3_RXD1 */
388                                         0x1  0x5  0x2  0x0  0x2  0x0    /* ENET3_RXD2_SER3_RXD2 */
389                                         0x1  0x6  0x2  0x0  0x3  0x0    /* ENET3_RXD3_SER3_RXD3 */
390                                         0x1  0x1  0x1  0x0  0x1  0x0    /* ENET3_TX_EN_SER3_RTS_B */
391                                         0x1  0x9  0x2  0x0  0x3  0x0    /* ENET3_RX_DV_SER3_CTS_B */
392                                         0x2  0x9  0x2  0x0  0x2  0x0    /* ENET3_GRXCLK */
393                                         0x2  0x19 0x1  0x0  0x2  0x0>;  /* ENET3_GTXCLK */
394                         };
396                         pio4: ucc_pin@04 {
397                                 pio-map = <
398                         /* port  pin  dir  open_drain  assignment  has_irq */
399                                         0x2  0x1f 0x1  0x0  0x1  0x0    /* QE_MUX_MDC */
400                                         0x2  0x1e 0x3  0x0  0x2  0x0    /* QE_MUX_MDIO */
401                                         0x2  0x10 0x2  0x0  0x3  0x0    /* CLK17 */
402                                         0x1  0xc  0x1  0x0  0x2  0x0    /* ENET4_TXD0_SER4_TXD0 */
403                                         0x1  0xd  0x1  0x0  0x2  0x0    /* ENET4_TXD1_SER4_TXD1 */
404                                         0x1  0xe  0x1  0x0  0x1  0x0    /* ENET4_TXD2_SER4_TXD2 */
405                                         0x1  0xf  0x1  0x0  0x2  0x0    /* ENET4_TXD3_SER4_TXD3 */
406                                         0x1  0x12 0x2  0x0  0x2  0x0    /* ENET4_RXD0_SER4_RXD0 */
407                                         0x1  0x13 0x2  0x0  0x1  0x0    /* ENET4_RXD1_SER4_RXD1 */
408                                         0x1  0x14 0x2  0x0  0x1  0x0    /* ENET4_RXD2_SER4_RXD2 */
409                                         0x1  0x15 0x2  0x0  0x2  0x0    /* ENET4_RXD3_SER4_RXD3 */
410                                         0x1  0x10 0x1  0x0  0x2  0x0    /* ENET4_TX_EN_SER4_RTS_B */
411                                         0x1  0x18 0x2  0x0  0x3  0x0    /* ENET4_RX_DV_SER4_CTS_B */
412                                         0x2  0x11 0x2  0x0  0x2  0x0    /* ENET4_GRXCLK */
413                                         0x2  0x18 0x1  0x0  0x2  0x0>;  /* ENET4_GTXCLK */
414                         };
415                 };
416         };
418         qe@e0080000 {
419                 #address-cells = <1>;
420                 #size-cells = <1>;
421                 device_type = "qe";
422                 compatible = "fsl,qe";
423                 ranges = <0x0 0xe0080000 0x40000>;
424                 reg = <0xe0080000 0x480>;
425                 brg-frequency = <0>;
426                 bus-frequency = <0>;
427                 fsl,qe-num-riscs = <4>;
428                 fsl,qe-num-snums = <46>;
430                 qeic: interrupt-controller@80 {
431                         interrupt-controller;
432                         compatible = "fsl,qe-ic";
433                         #address-cells = <0>;
434                         #interrupt-cells = <1>;
435                         reg = <0x80 0x80>;
436                         interrupts = <46 2 46 2>; //high:30 low:30
437                         interrupt-parent = <&mpic>;
438                 };
440                 timer@440 {
441                         compatible = "fsl,mpc8569-qe-gtm",
442                                      "fsl,qe-gtm", "fsl,gtm";
443                         reg = <0x440 0x40>;
444                         interrupts = <12 13 14 15>;
445                         interrupt-parent = <&qeic>;
446                         /* Filled in by U-Boot */
447                         clock-frequency = <0>;
448                 };
450                 spi@4c0 {
451                         #address-cells = <1>;
452                         #size-cells = <0>;
453                         compatible = "fsl,mpc8569-qe-spi", "fsl,spi";
454                         reg = <0x4c0 0x40>;
455                         cell-index = <0>;
456                         interrupts = <2>;
457                         interrupt-parent = <&qeic>;
458                         gpios = <&qe_pio_e 30 0>;
459                         mode = "cpu-qe";
461                         serial-flash@0 {
462                                 compatible = "stm,m25p40";
463                                 reg = <0>;
464                                 spi-max-frequency = <25000000>;
465                         };
466                 };
468                 spi@500 {
469                         cell-index = <1>;
470                         compatible = "fsl,spi";
471                         reg = <0x500 0x40>;
472                         interrupts = <1>;
473                         interrupt-parent = <&qeic>;
474                         mode = "cpu";
475                 };
477                 usb@6c0 {
478                         compatible = "fsl,mpc8569-qe-usb",
479                                      "fsl,mpc8323-qe-usb";
480                         reg = <0x6c0 0x40 0x8b00 0x100>;
481                         interrupts = <11>;
482                         interrupt-parent = <&qeic>;
483                         fsl,fullspeed-clock = "clk5";
484                         fsl,lowspeed-clock = "brg10";
485                         gpios = <&qe_pio_f 3 0   /* USBOE */
486                                  &qe_pio_f 4 0   /* USBTP */
487                                  &qe_pio_f 5 0   /* USBTN */
488                                  &qe_pio_f 6 0   /* USBRP */
489                                  &qe_pio_f 8 0   /* USBRN */
490                                  &bcsr17   6 0   /* SPEED */
491                                  &bcsr17   5 1>; /* POWER */
492                 };
494                 enet0: ucc@2000 {
495                         device_type = "network";
496                         compatible = "ucc_geth";
497                         cell-index = <1>;
498                         reg = <0x2000 0x200>;
499                         interrupts = <32>;
500                         interrupt-parent = <&qeic>;
501                         local-mac-address = [ 00 00 00 00 00 00 ];
502                         rx-clock-name = "none";
503                         tx-clock-name = "clk12";
504                         pio-handle = <&pio1>;
505                         phy-handle = <&qe_phy0>;
506                         phy-connection-type = "rgmii-id";
507                 };
509                 mdio@2120 {
510                         #address-cells = <1>;
511                         #size-cells = <0>;
512                         reg = <0x2120 0x18>;
513                         compatible = "fsl,ucc-mdio";
515                         qe_phy0: ethernet-phy@07 {
516                                 interrupt-parent = <&mpic>;
517                                 interrupts = <1 1>;
518                                 reg = <0x7>;
519                                 device_type = "ethernet-phy";
520                         };
521                         qe_phy1: ethernet-phy@01 {
522                                 interrupt-parent = <&mpic>;
523                                 interrupts = <2 1>;
524                                 reg = <0x1>;
525                                 device_type = "ethernet-phy";
526                         };
527                         qe_phy2: ethernet-phy@02 {
528                                 interrupt-parent = <&mpic>;
529                                 interrupts = <3 1>;
530                                 reg = <0x2>;
531                                 device_type = "ethernet-phy";
532                         };
533                         qe_phy3: ethernet-phy@03 {
534                                 interrupt-parent = <&mpic>;
535                                 interrupts = <4 1>;
536                                 reg = <0x3>;
537                                 device_type = "ethernet-phy";
538                         };
539                         qe_phy5: ethernet-phy@04 {
540                                 interrupt-parent = <&mpic>;
541                                 reg = <0x04>;
542                                 device_type = "ethernet-phy";
543                         };
544                         qe_phy7: ethernet-phy@06 {
545                                 interrupt-parent = <&mpic>;
546                                 reg = <0x6>;
547                                 device_type = "ethernet-phy";
548                         };
549                         tbi-phy@11 {
550                                 reg = <0x11>;
551                                 device_type = "tbi-phy";
552                         };
553                 };
554                 mdio@3520 {
555                         #address-cells = <1>;
556                         #size-cells = <0>;
557                         reg = <0x3520 0x18>;
558                         compatible = "fsl,ucc-mdio";
560                         tbi0: tbi-phy@15 {
561                         reg = <0x15>;
562                         device_type = "tbi-phy";
563                         };
564                 };
565                 mdio@3720 {
566                         #address-cells = <1>;
567                         #size-cells = <0>;
568                         reg = <0x3720 0x38>;
569                         compatible = "fsl,ucc-mdio";
570                         tbi1: tbi-phy@17 {
571                                 reg = <0x17>;
572                                 device_type = "tbi-phy";
573                         };
574                 };
576                 enet2: ucc@2200 {
577                         device_type = "network";
578                         compatible = "ucc_geth";
579                         cell-index = <3>;
580                         reg = <0x2200 0x200>;
581                         interrupts = <34>;
582                         interrupt-parent = <&qeic>;
583                         local-mac-address = [ 00 00 00 00 00 00 ];
584                         rx-clock-name = "none";
585                         tx-clock-name = "clk12";
586                         pio-handle = <&pio3>;
587                         phy-handle = <&qe_phy2>;
588                         phy-connection-type = "rgmii-id";
589                 };
591                 enet1: ucc@3000 {
592                         device_type = "network";
593                         compatible = "ucc_geth";
594                         cell-index = <2>;
595                         reg = <0x3000 0x200>;
596                         interrupts = <33>;
597                         interrupt-parent = <&qeic>;
598                         local-mac-address = [ 00 00 00 00 00 00 ];
599                         rx-clock-name = "none";
600                         tx-clock-name = "clk17";
601                         pio-handle = <&pio2>;
602                         phy-handle = <&qe_phy1>;
603                         phy-connection-type = "rgmii-id";
604                 };
606                 enet3: ucc@3200 {
607                         device_type = "network";
608                         compatible = "ucc_geth";
609                         cell-index = <4>;
610                         reg = <0x3200 0x200>;
611                         interrupts = <35>;
612                         interrupt-parent = <&qeic>;
613                         local-mac-address = [ 00 00 00 00 00 00 ];
614                         rx-clock-name = "none";
615                         tx-clock-name = "clk17";
616                         pio-handle = <&pio4>;
617                         phy-handle = <&qe_phy3>;
618                         phy-connection-type = "rgmii-id";
619                 };
621                 enet5: ucc@3400 {
622                         device_type = "network";
623                         compatible = "ucc_geth";
624                         cell-index = <6>;
625                         reg = <0x3400 0x200>;
626                         interrupts = <41>;
627                         interrupt-parent = <&qeic>;
628                         local-mac-address = [ 00 00 00 00 00 00 ];
629                         rx-clock-name = "none";
630                         tx-clock-name = "none";
631                         tbi-handle = <&tbi0>;
632                         phy-handle = <&qe_phy5>;
633                         phy-connection-type = "sgmii";
634                 };
636                 enet7: ucc@3600 {
637                         device_type = "network";
638                         compatible = "ucc_geth";
639                         cell-index = <8>;
640                         reg = <0x3600 0x200>;
641                         interrupts = <43>;
642                         interrupt-parent = <&qeic>;
643                         local-mac-address = [ 00 00 00 00 00 00 ];
644                         rx-clock-name = "none";
645                         tx-clock-name = "none";
646                         tbi-handle = <&tbi1>;
647                         phy-handle = <&qe_phy7>;
648                         phy-connection-type = "sgmii";
649                 };
651                 muram@10000 {
652                         #address-cells = <1>;
653                         #size-cells = <1>;
654                         compatible = "fsl,qe-muram", "fsl,cpm-muram";
655                         ranges = <0x0 0x10000 0x20000>;
657                         data-only@0 {
658                                 compatible = "fsl,qe-muram-data",
659                                              "fsl,cpm-muram-data";
660                                 reg = <0x0 0x20000>;
661                         };
662                 };
664         };
666         /* PCI Express */
667         pci1: pcie@e000a000 {
668                 compatible = "fsl,mpc8548-pcie";
669                 device_type = "pci";
670                 #interrupt-cells = <1>;
671                 #size-cells = <2>;
672                 #address-cells = <3>;
673                 reg = <0xe000a000 0x1000>;
674                 interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
675                 interrupt-map = <
676                         /* IDSEL 0x0 (PEX) */
677                         00000 0x0 0x0 0x1 &mpic 0x0 0x1
678                         00000 0x0 0x0 0x2 &mpic 0x1 0x1
679                         00000 0x0 0x0 0x3 &mpic 0x2 0x1
680                         00000 0x0 0x0 0x4 &mpic 0x3 0x1>;
682                 interrupt-parent = <&mpic>;
683                 interrupts = <26 2>;
684                 bus-range = <0 255>;
685                 ranges = <0x2000000 0x0 0xa0000000 0xa0000000 0x0 0x10000000
686                           0x1000000 0x0 0x00000000 0xe2800000 0x0 0x00800000>;
687                 clock-frequency = <33333333>;
688                 pcie@0 {
689                         reg = <0x0 0x0 0x0 0x0 0x0>;
690                         #size-cells = <2>;
691                         #address-cells = <3>;
692                         device_type = "pci";
693                         ranges = <0x2000000 0x0 0xa0000000
694                                   0x2000000 0x0 0xa0000000
695                                   0x0 0x10000000
697                                   0x1000000 0x0 0x0
698                                   0x1000000 0x0 0x0
699                                   0x0 0x800000>;
700                 };
701         };
703         rio0: rapidio@e00c00000 {
704                 #address-cells = <2>;
705                 #size-cells = <2>;
706                 compatible = "fsl,mpc8569-rapidio", "fsl,rapidio-delta";
707                 reg = <0xe00c0000 0x20000>;
708                 ranges = <0x0 0x0 0xc0000000 0x0 0x20000000>;
709                 interrupts = <48 2 /* error     */
710                               49 2 /* bell_outb */
711                               50 2 /* bell_inb  */
712                               53 2 /* msg1_tx   */
713                               54 2 /* msg1_rx   */
714                               55 2 /* msg2_tx   */
715                               56 2 /* msg2_rx   */>;
716                 interrupt-parent = <&mpic>;
717         };