Full support for Ginger Console
[linux-ginger.git] / drivers / net / bonding / bond_main.c
blob69c5b15e22daca1239e5d10bc6f00b767ae3ce4c
1 /*
2 * originally based on the dummy device.
4 * Copyright 1999, Thomas Davis, tadavis@lbl.gov.
5 * Licensed under the GPL. Based on dummy.c, and eql.c devices.
7 * bonding.c: an Ethernet Bonding driver
9 * This is useful to talk to a Cisco EtherChannel compatible equipment:
10 * Cisco 5500
11 * Sun Trunking (Solaris)
12 * Alteon AceDirector Trunks
13 * Linux Bonding
14 * and probably many L2 switches ...
16 * How it works:
17 * ifconfig bond0 ipaddress netmask up
18 * will setup a network device, with an ip address. No mac address
19 * will be assigned at this time. The hw mac address will come from
20 * the first slave bonded to the channel. All slaves will then use
21 * this hw mac address.
23 * ifconfig bond0 down
24 * will release all slaves, marking them as down.
26 * ifenslave bond0 eth0
27 * will attach eth0 to bond0 as a slave. eth0 hw mac address will either
28 * a: be used as initial mac address
29 * b: if a hw mac address already is there, eth0's hw mac address
30 * will then be set from bond0.
34 #include <linux/kernel.h>
35 #include <linux/module.h>
36 #include <linux/types.h>
37 #include <linux/fcntl.h>
38 #include <linux/interrupt.h>
39 #include <linux/ptrace.h>
40 #include <linux/ioport.h>
41 #include <linux/in.h>
42 #include <net/ip.h>
43 #include <linux/ip.h>
44 #include <linux/tcp.h>
45 #include <linux/udp.h>
46 #include <linux/slab.h>
47 #include <linux/string.h>
48 #include <linux/init.h>
49 #include <linux/timer.h>
50 #include <linux/socket.h>
51 #include <linux/ctype.h>
52 #include <linux/inet.h>
53 #include <linux/bitops.h>
54 #include <linux/io.h>
55 #include <asm/system.h>
56 #include <asm/dma.h>
57 #include <linux/uaccess.h>
58 #include <linux/errno.h>
59 #include <linux/netdevice.h>
60 #include <linux/inetdevice.h>
61 #include <linux/igmp.h>
62 #include <linux/etherdevice.h>
63 #include <linux/skbuff.h>
64 #include <net/sock.h>
65 #include <linux/rtnetlink.h>
66 #include <linux/proc_fs.h>
67 #include <linux/seq_file.h>
68 #include <linux/smp.h>
69 #include <linux/if_ether.h>
70 #include <net/arp.h>
71 #include <linux/mii.h>
72 #include <linux/ethtool.h>
73 #include <linux/if_vlan.h>
74 #include <linux/if_bonding.h>
75 #include <linux/jiffies.h>
76 #include <net/route.h>
77 #include <net/net_namespace.h>
78 #include "bonding.h"
79 #include "bond_3ad.h"
80 #include "bond_alb.h"
82 /*---------------------------- Module parameters ----------------------------*/
84 /* monitor all links that often (in milliseconds). <=0 disables monitoring */
85 #define BOND_LINK_MON_INTERV 0
86 #define BOND_LINK_ARP_INTERV 0
88 static int max_bonds = BOND_DEFAULT_MAX_BONDS;
89 static int num_grat_arp = 1;
90 static int num_unsol_na = 1;
91 static int miimon = BOND_LINK_MON_INTERV;
92 static int updelay;
93 static int downdelay;
94 static int use_carrier = 1;
95 static char *mode;
96 static char *primary;
97 static char *lacp_rate;
98 static char *ad_select;
99 static char *xmit_hash_policy;
100 static int arp_interval = BOND_LINK_ARP_INTERV;
101 static char *arp_ip_target[BOND_MAX_ARP_TARGETS];
102 static char *arp_validate;
103 static char *fail_over_mac;
104 static struct bond_params bonding_defaults;
106 module_param(max_bonds, int, 0);
107 MODULE_PARM_DESC(max_bonds, "Max number of bonded devices");
108 module_param(num_grat_arp, int, 0644);
109 MODULE_PARM_DESC(num_grat_arp, "Number of gratuitous ARP packets to send on failover event");
110 module_param(num_unsol_na, int, 0644);
111 MODULE_PARM_DESC(num_unsol_na, "Number of unsolicited IPv6 Neighbor Advertisements packets to send on failover event");
112 module_param(miimon, int, 0);
113 MODULE_PARM_DESC(miimon, "Link check interval in milliseconds");
114 module_param(updelay, int, 0);
115 MODULE_PARM_DESC(updelay, "Delay before considering link up, in milliseconds");
116 module_param(downdelay, int, 0);
117 MODULE_PARM_DESC(downdelay, "Delay before considering link down, "
118 "in milliseconds");
119 module_param(use_carrier, int, 0);
120 MODULE_PARM_DESC(use_carrier, "Use netif_carrier_ok (vs MII ioctls) in miimon; "
121 "0 for off, 1 for on (default)");
122 module_param(mode, charp, 0);
123 MODULE_PARM_DESC(mode, "Mode of operation : 0 for balance-rr, "
124 "1 for active-backup, 2 for balance-xor, "
125 "3 for broadcast, 4 for 802.3ad, 5 for balance-tlb, "
126 "6 for balance-alb");
127 module_param(primary, charp, 0);
128 MODULE_PARM_DESC(primary, "Primary network device to use");
129 module_param(lacp_rate, charp, 0);
130 MODULE_PARM_DESC(lacp_rate, "LACPDU tx rate to request from 802.3ad partner "
131 "(slow/fast)");
132 module_param(ad_select, charp, 0);
133 MODULE_PARM_DESC(ad_select, "803.ad aggregation selection logic: stable (0, default), bandwidth (1), count (2)");
134 module_param(xmit_hash_policy, charp, 0);
135 MODULE_PARM_DESC(xmit_hash_policy, "XOR hashing method: 0 for layer 2 (default)"
136 ", 1 for layer 3+4");
137 module_param(arp_interval, int, 0);
138 MODULE_PARM_DESC(arp_interval, "arp interval in milliseconds");
139 module_param_array(arp_ip_target, charp, NULL, 0);
140 MODULE_PARM_DESC(arp_ip_target, "arp targets in n.n.n.n form");
141 module_param(arp_validate, charp, 0);
142 MODULE_PARM_DESC(arp_validate, "validate src/dst of ARP probes: none (default), active, backup or all");
143 module_param(fail_over_mac, charp, 0);
144 MODULE_PARM_DESC(fail_over_mac, "For active-backup, do not set all slaves to the same MAC. none (default), active or follow");
146 /*----------------------------- Global variables ----------------------------*/
148 static const char * const version =
149 DRV_DESCRIPTION ": v" DRV_VERSION " (" DRV_RELDATE ")\n";
151 LIST_HEAD(bond_dev_list);
153 #ifdef CONFIG_PROC_FS
154 static struct proc_dir_entry *bond_proc_dir;
155 #endif
157 static __be32 arp_target[BOND_MAX_ARP_TARGETS];
158 static int arp_ip_count;
159 static int bond_mode = BOND_MODE_ROUNDROBIN;
160 static int xmit_hashtype = BOND_XMIT_POLICY_LAYER2;
161 static int lacp_fast;
164 const struct bond_parm_tbl bond_lacp_tbl[] = {
165 { "slow", AD_LACP_SLOW},
166 { "fast", AD_LACP_FAST},
167 { NULL, -1},
170 const struct bond_parm_tbl bond_mode_tbl[] = {
171 { "balance-rr", BOND_MODE_ROUNDROBIN},
172 { "active-backup", BOND_MODE_ACTIVEBACKUP},
173 { "balance-xor", BOND_MODE_XOR},
174 { "broadcast", BOND_MODE_BROADCAST},
175 { "802.3ad", BOND_MODE_8023AD},
176 { "balance-tlb", BOND_MODE_TLB},
177 { "balance-alb", BOND_MODE_ALB},
178 { NULL, -1},
181 const struct bond_parm_tbl xmit_hashtype_tbl[] = {
182 { "layer2", BOND_XMIT_POLICY_LAYER2},
183 { "layer3+4", BOND_XMIT_POLICY_LAYER34},
184 { "layer2+3", BOND_XMIT_POLICY_LAYER23},
185 { NULL, -1},
188 const struct bond_parm_tbl arp_validate_tbl[] = {
189 { "none", BOND_ARP_VALIDATE_NONE},
190 { "active", BOND_ARP_VALIDATE_ACTIVE},
191 { "backup", BOND_ARP_VALIDATE_BACKUP},
192 { "all", BOND_ARP_VALIDATE_ALL},
193 { NULL, -1},
196 const struct bond_parm_tbl fail_over_mac_tbl[] = {
197 { "none", BOND_FOM_NONE},
198 { "active", BOND_FOM_ACTIVE},
199 { "follow", BOND_FOM_FOLLOW},
200 { NULL, -1},
203 struct bond_parm_tbl ad_select_tbl[] = {
204 { "stable", BOND_AD_STABLE},
205 { "bandwidth", BOND_AD_BANDWIDTH},
206 { "count", BOND_AD_COUNT},
207 { NULL, -1},
210 /*-------------------------- Forward declarations ---------------------------*/
212 static void bond_send_gratuitous_arp(struct bonding *bond);
213 static int bond_init(struct net_device *bond_dev);
214 static void bond_deinit(struct net_device *bond_dev);
216 /*---------------------------- General routines -----------------------------*/
218 static const char *bond_mode_name(int mode)
220 static const char *names[] = {
221 [BOND_MODE_ROUNDROBIN] = "load balancing (round-robin)",
222 [BOND_MODE_ACTIVEBACKUP] = "fault-tolerance (active-backup)",
223 [BOND_MODE_XOR] = "load balancing (xor)",
224 [BOND_MODE_BROADCAST] = "fault-tolerance (broadcast)",
225 [BOND_MODE_8023AD] = "IEEE 802.3ad Dynamic link aggregation",
226 [BOND_MODE_TLB] = "transmit load balancing",
227 [BOND_MODE_ALB] = "adaptive load balancing",
230 if (mode < 0 || mode > BOND_MODE_ALB)
231 return "unknown";
233 return names[mode];
236 /*---------------------------------- VLAN -----------------------------------*/
239 * bond_add_vlan - add a new vlan id on bond
240 * @bond: bond that got the notification
241 * @vlan_id: the vlan id to add
243 * Returns -ENOMEM if allocation failed.
245 static int bond_add_vlan(struct bonding *bond, unsigned short vlan_id)
247 struct vlan_entry *vlan;
249 pr_debug("bond: %s, vlan id %d\n",
250 (bond ? bond->dev->name : "None"), vlan_id);
252 vlan = kzalloc(sizeof(struct vlan_entry), GFP_KERNEL);
253 if (!vlan)
254 return -ENOMEM;
256 INIT_LIST_HEAD(&vlan->vlan_list);
257 vlan->vlan_id = vlan_id;
259 write_lock_bh(&bond->lock);
261 list_add_tail(&vlan->vlan_list, &bond->vlan_list);
263 write_unlock_bh(&bond->lock);
265 pr_debug("added VLAN ID %d on bond %s\n", vlan_id, bond->dev->name);
267 return 0;
271 * bond_del_vlan - delete a vlan id from bond
272 * @bond: bond that got the notification
273 * @vlan_id: the vlan id to delete
275 * returns -ENODEV if @vlan_id was not found in @bond.
277 static int bond_del_vlan(struct bonding *bond, unsigned short vlan_id)
279 struct vlan_entry *vlan;
280 int res = -ENODEV;
282 pr_debug("bond: %s, vlan id %d\n", bond->dev->name, vlan_id);
284 write_lock_bh(&bond->lock);
286 list_for_each_entry(vlan, &bond->vlan_list, vlan_list) {
287 if (vlan->vlan_id == vlan_id) {
288 list_del(&vlan->vlan_list);
290 if (bond_is_lb(bond))
291 bond_alb_clear_vlan(bond, vlan_id);
293 pr_debug("removed VLAN ID %d from bond %s\n", vlan_id,
294 bond->dev->name);
296 kfree(vlan);
298 if (list_empty(&bond->vlan_list) &&
299 (bond->slave_cnt == 0)) {
300 /* Last VLAN removed and no slaves, so
301 * restore block on adding VLANs. This will
302 * be removed once new slaves that are not
303 * VLAN challenged will be added.
305 bond->dev->features |= NETIF_F_VLAN_CHALLENGED;
308 res = 0;
309 goto out;
313 pr_debug("couldn't find VLAN ID %d in bond %s\n", vlan_id,
314 bond->dev->name);
316 out:
317 write_unlock_bh(&bond->lock);
318 return res;
322 * bond_has_challenged_slaves
323 * @bond: the bond we're working on
325 * Searches the slave list. Returns 1 if a vlan challenged slave
326 * was found, 0 otherwise.
328 * Assumes bond->lock is held.
330 static int bond_has_challenged_slaves(struct bonding *bond)
332 struct slave *slave;
333 int i;
335 bond_for_each_slave(bond, slave, i) {
336 if (slave->dev->features & NETIF_F_VLAN_CHALLENGED) {
337 pr_debug("found VLAN challenged slave - %s\n",
338 slave->dev->name);
339 return 1;
343 pr_debug("no VLAN challenged slaves found\n");
344 return 0;
348 * bond_next_vlan - safely skip to the next item in the vlans list.
349 * @bond: the bond we're working on
350 * @curr: item we're advancing from
352 * Returns %NULL if list is empty, bond->next_vlan if @curr is %NULL,
353 * or @curr->next otherwise (even if it is @curr itself again).
355 * Caller must hold bond->lock
357 struct vlan_entry *bond_next_vlan(struct bonding *bond, struct vlan_entry *curr)
359 struct vlan_entry *next, *last;
361 if (list_empty(&bond->vlan_list))
362 return NULL;
364 if (!curr) {
365 next = list_entry(bond->vlan_list.next,
366 struct vlan_entry, vlan_list);
367 } else {
368 last = list_entry(bond->vlan_list.prev,
369 struct vlan_entry, vlan_list);
370 if (last == curr) {
371 next = list_entry(bond->vlan_list.next,
372 struct vlan_entry, vlan_list);
373 } else {
374 next = list_entry(curr->vlan_list.next,
375 struct vlan_entry, vlan_list);
379 return next;
383 * bond_dev_queue_xmit - Prepare skb for xmit.
385 * @bond: bond device that got this skb for tx.
386 * @skb: hw accel VLAN tagged skb to transmit
387 * @slave_dev: slave that is supposed to xmit this skbuff
389 * When the bond gets an skb to transmit that is
390 * already hardware accelerated VLAN tagged, and it
391 * needs to relay this skb to a slave that is not
392 * hw accel capable, the skb needs to be "unaccelerated",
393 * i.e. strip the hwaccel tag and re-insert it as part
394 * of the payload.
396 int bond_dev_queue_xmit(struct bonding *bond, struct sk_buff *skb,
397 struct net_device *slave_dev)
399 unsigned short uninitialized_var(vlan_id);
401 if (!list_empty(&bond->vlan_list) &&
402 !(slave_dev->features & NETIF_F_HW_VLAN_TX) &&
403 vlan_get_tag(skb, &vlan_id) == 0) {
404 skb->dev = slave_dev;
405 skb = vlan_put_tag(skb, vlan_id);
406 if (!skb) {
407 /* vlan_put_tag() frees the skb in case of error,
408 * so return success here so the calling functions
409 * won't attempt to free is again.
411 return 0;
413 } else {
414 skb->dev = slave_dev;
417 skb->priority = 1;
418 dev_queue_xmit(skb);
420 return 0;
424 * In the following 3 functions, bond_vlan_rx_register(), bond_vlan_rx_add_vid
425 * and bond_vlan_rx_kill_vid, We don't protect the slave list iteration with a
426 * lock because:
427 * a. This operation is performed in IOCTL context,
428 * b. The operation is protected by the RTNL semaphore in the 8021q code,
429 * c. Holding a lock with BH disabled while directly calling a base driver
430 * entry point is generally a BAD idea.
432 * The design of synchronization/protection for this operation in the 8021q
433 * module is good for one or more VLAN devices over a single physical device
434 * and cannot be extended for a teaming solution like bonding, so there is a
435 * potential race condition here where a net device from the vlan group might
436 * be referenced (either by a base driver or the 8021q code) while it is being
437 * removed from the system. However, it turns out we're not making matters
438 * worse, and if it works for regular VLAN usage it will work here too.
442 * bond_vlan_rx_register - Propagates registration to slaves
443 * @bond_dev: bonding net device that got called
444 * @grp: vlan group being registered
446 static void bond_vlan_rx_register(struct net_device *bond_dev,
447 struct vlan_group *grp)
449 struct bonding *bond = netdev_priv(bond_dev);
450 struct slave *slave;
451 int i;
453 bond->vlgrp = grp;
455 bond_for_each_slave(bond, slave, i) {
456 struct net_device *slave_dev = slave->dev;
457 const struct net_device_ops *slave_ops = slave_dev->netdev_ops;
459 if ((slave_dev->features & NETIF_F_HW_VLAN_RX) &&
460 slave_ops->ndo_vlan_rx_register) {
461 slave_ops->ndo_vlan_rx_register(slave_dev, grp);
467 * bond_vlan_rx_add_vid - Propagates adding an id to slaves
468 * @bond_dev: bonding net device that got called
469 * @vid: vlan id being added
471 static void bond_vlan_rx_add_vid(struct net_device *bond_dev, uint16_t vid)
473 struct bonding *bond = netdev_priv(bond_dev);
474 struct slave *slave;
475 int i, res;
477 bond_for_each_slave(bond, slave, i) {
478 struct net_device *slave_dev = slave->dev;
479 const struct net_device_ops *slave_ops = slave_dev->netdev_ops;
481 if ((slave_dev->features & NETIF_F_HW_VLAN_FILTER) &&
482 slave_ops->ndo_vlan_rx_add_vid) {
483 slave_ops->ndo_vlan_rx_add_vid(slave_dev, vid);
487 res = bond_add_vlan(bond, vid);
488 if (res) {
489 pr_err(DRV_NAME
490 ": %s: Error: Failed to add vlan id %d\n",
491 bond_dev->name, vid);
496 * bond_vlan_rx_kill_vid - Propagates deleting an id to slaves
497 * @bond_dev: bonding net device that got called
498 * @vid: vlan id being removed
500 static void bond_vlan_rx_kill_vid(struct net_device *bond_dev, uint16_t vid)
502 struct bonding *bond = netdev_priv(bond_dev);
503 struct slave *slave;
504 struct net_device *vlan_dev;
505 int i, res;
507 bond_for_each_slave(bond, slave, i) {
508 struct net_device *slave_dev = slave->dev;
509 const struct net_device_ops *slave_ops = slave_dev->netdev_ops;
511 if ((slave_dev->features & NETIF_F_HW_VLAN_FILTER) &&
512 slave_ops->ndo_vlan_rx_kill_vid) {
513 /* Save and then restore vlan_dev in the grp array,
514 * since the slave's driver might clear it.
516 vlan_dev = vlan_group_get_device(bond->vlgrp, vid);
517 slave_ops->ndo_vlan_rx_kill_vid(slave_dev, vid);
518 vlan_group_set_device(bond->vlgrp, vid, vlan_dev);
522 res = bond_del_vlan(bond, vid);
523 if (res) {
524 pr_err(DRV_NAME
525 ": %s: Error: Failed to remove vlan id %d\n",
526 bond_dev->name, vid);
530 static void bond_add_vlans_on_slave(struct bonding *bond, struct net_device *slave_dev)
532 struct vlan_entry *vlan;
533 const struct net_device_ops *slave_ops = slave_dev->netdev_ops;
535 write_lock_bh(&bond->lock);
537 if (list_empty(&bond->vlan_list))
538 goto out;
540 if ((slave_dev->features & NETIF_F_HW_VLAN_RX) &&
541 slave_ops->ndo_vlan_rx_register)
542 slave_ops->ndo_vlan_rx_register(slave_dev, bond->vlgrp);
544 if (!(slave_dev->features & NETIF_F_HW_VLAN_FILTER) ||
545 !(slave_ops->ndo_vlan_rx_add_vid))
546 goto out;
548 list_for_each_entry(vlan, &bond->vlan_list, vlan_list)
549 slave_ops->ndo_vlan_rx_add_vid(slave_dev, vlan->vlan_id);
551 out:
552 write_unlock_bh(&bond->lock);
555 static void bond_del_vlans_from_slave(struct bonding *bond,
556 struct net_device *slave_dev)
558 const struct net_device_ops *slave_ops = slave_dev->netdev_ops;
559 struct vlan_entry *vlan;
560 struct net_device *vlan_dev;
562 write_lock_bh(&bond->lock);
564 if (list_empty(&bond->vlan_list))
565 goto out;
567 if (!(slave_dev->features & NETIF_F_HW_VLAN_FILTER) ||
568 !(slave_ops->ndo_vlan_rx_kill_vid))
569 goto unreg;
571 list_for_each_entry(vlan, &bond->vlan_list, vlan_list) {
572 /* Save and then restore vlan_dev in the grp array,
573 * since the slave's driver might clear it.
575 vlan_dev = vlan_group_get_device(bond->vlgrp, vlan->vlan_id);
576 slave_ops->ndo_vlan_rx_kill_vid(slave_dev, vlan->vlan_id);
577 vlan_group_set_device(bond->vlgrp, vlan->vlan_id, vlan_dev);
580 unreg:
581 if ((slave_dev->features & NETIF_F_HW_VLAN_RX) &&
582 slave_ops->ndo_vlan_rx_register)
583 slave_ops->ndo_vlan_rx_register(slave_dev, NULL);
585 out:
586 write_unlock_bh(&bond->lock);
589 /*------------------------------- Link status -------------------------------*/
592 * Set the carrier state for the master according to the state of its
593 * slaves. If any slaves are up, the master is up. In 802.3ad mode,
594 * do special 802.3ad magic.
596 * Returns zero if carrier state does not change, nonzero if it does.
598 static int bond_set_carrier(struct bonding *bond)
600 struct slave *slave;
601 int i;
603 if (bond->slave_cnt == 0)
604 goto down;
606 if (bond->params.mode == BOND_MODE_8023AD)
607 return bond_3ad_set_carrier(bond);
609 bond_for_each_slave(bond, slave, i) {
610 if (slave->link == BOND_LINK_UP) {
611 if (!netif_carrier_ok(bond->dev)) {
612 netif_carrier_on(bond->dev);
613 return 1;
615 return 0;
619 down:
620 if (netif_carrier_ok(bond->dev)) {
621 netif_carrier_off(bond->dev);
622 return 1;
624 return 0;
628 * Get link speed and duplex from the slave's base driver
629 * using ethtool. If for some reason the call fails or the
630 * values are invalid, fake speed and duplex to 100/Full
631 * and return error.
633 static int bond_update_speed_duplex(struct slave *slave)
635 struct net_device *slave_dev = slave->dev;
636 struct ethtool_cmd etool;
637 int res;
639 /* Fake speed and duplex */
640 slave->speed = SPEED_100;
641 slave->duplex = DUPLEX_FULL;
643 if (!slave_dev->ethtool_ops || !slave_dev->ethtool_ops->get_settings)
644 return -1;
646 res = slave_dev->ethtool_ops->get_settings(slave_dev, &etool);
647 if (res < 0)
648 return -1;
650 switch (etool.speed) {
651 case SPEED_10:
652 case SPEED_100:
653 case SPEED_1000:
654 case SPEED_10000:
655 break;
656 default:
657 return -1;
660 switch (etool.duplex) {
661 case DUPLEX_FULL:
662 case DUPLEX_HALF:
663 break;
664 default:
665 return -1;
668 slave->speed = etool.speed;
669 slave->duplex = etool.duplex;
671 return 0;
675 * if <dev> supports MII link status reporting, check its link status.
677 * We either do MII/ETHTOOL ioctls, or check netif_carrier_ok(),
678 * depending upon the setting of the use_carrier parameter.
680 * Return either BMSR_LSTATUS, meaning that the link is up (or we
681 * can't tell and just pretend it is), or 0, meaning that the link is
682 * down.
684 * If reporting is non-zero, instead of faking link up, return -1 if
685 * both ETHTOOL and MII ioctls fail (meaning the device does not
686 * support them). If use_carrier is set, return whatever it says.
687 * It'd be nice if there was a good way to tell if a driver supports
688 * netif_carrier, but there really isn't.
690 static int bond_check_dev_link(struct bonding *bond,
691 struct net_device *slave_dev, int reporting)
693 const struct net_device_ops *slave_ops = slave_dev->netdev_ops;
694 static int (*ioctl)(struct net_device *, struct ifreq *, int);
695 struct ifreq ifr;
696 struct mii_ioctl_data *mii;
698 if (!reporting && !netif_running(slave_dev))
699 return 0;
701 if (bond->params.use_carrier)
702 return netif_carrier_ok(slave_dev) ? BMSR_LSTATUS : 0;
704 /* Try to get link status using Ethtool first. */
705 if (slave_dev->ethtool_ops) {
706 if (slave_dev->ethtool_ops->get_link) {
707 u32 link;
709 link = slave_dev->ethtool_ops->get_link(slave_dev);
711 return link ? BMSR_LSTATUS : 0;
715 /* Ethtool can't be used, fallback to MII ioctls. */
716 ioctl = slave_ops->ndo_do_ioctl;
717 if (ioctl) {
718 /* TODO: set pointer to correct ioctl on a per team member */
719 /* bases to make this more efficient. that is, once */
720 /* we determine the correct ioctl, we will always */
721 /* call it and not the others for that team */
722 /* member. */
725 * We cannot assume that SIOCGMIIPHY will also read a
726 * register; not all network drivers (e.g., e100)
727 * support that.
730 /* Yes, the mii is overlaid on the ifreq.ifr_ifru */
731 strncpy(ifr.ifr_name, slave_dev->name, IFNAMSIZ);
732 mii = if_mii(&ifr);
733 if (IOCTL(slave_dev, &ifr, SIOCGMIIPHY) == 0) {
734 mii->reg_num = MII_BMSR;
735 if (IOCTL(slave_dev, &ifr, SIOCGMIIREG) == 0)
736 return mii->val_out & BMSR_LSTATUS;
741 * If reporting, report that either there's no dev->do_ioctl,
742 * or both SIOCGMIIREG and get_link failed (meaning that we
743 * cannot report link status). If not reporting, pretend
744 * we're ok.
746 return reporting ? -1 : BMSR_LSTATUS;
749 /*----------------------------- Multicast list ------------------------------*/
752 * Returns 0 if dmi1 and dmi2 are the same, non-0 otherwise
754 static inline int bond_is_dmi_same(const struct dev_mc_list *dmi1,
755 const struct dev_mc_list *dmi2)
757 return memcmp(dmi1->dmi_addr, dmi2->dmi_addr, dmi1->dmi_addrlen) == 0 &&
758 dmi1->dmi_addrlen == dmi2->dmi_addrlen;
762 * returns dmi entry if found, NULL otherwise
764 static struct dev_mc_list *bond_mc_list_find_dmi(struct dev_mc_list *dmi,
765 struct dev_mc_list *mc_list)
767 struct dev_mc_list *idmi;
769 for (idmi = mc_list; idmi; idmi = idmi->next) {
770 if (bond_is_dmi_same(dmi, idmi))
771 return idmi;
774 return NULL;
778 * Push the promiscuity flag down to appropriate slaves
780 static int bond_set_promiscuity(struct bonding *bond, int inc)
782 int err = 0;
783 if (USES_PRIMARY(bond->params.mode)) {
784 /* write lock already acquired */
785 if (bond->curr_active_slave) {
786 err = dev_set_promiscuity(bond->curr_active_slave->dev,
787 inc);
789 } else {
790 struct slave *slave;
791 int i;
792 bond_for_each_slave(bond, slave, i) {
793 err = dev_set_promiscuity(slave->dev, inc);
794 if (err)
795 return err;
798 return err;
802 * Push the allmulti flag down to all slaves
804 static int bond_set_allmulti(struct bonding *bond, int inc)
806 int err = 0;
807 if (USES_PRIMARY(bond->params.mode)) {
808 /* write lock already acquired */
809 if (bond->curr_active_slave) {
810 err = dev_set_allmulti(bond->curr_active_slave->dev,
811 inc);
813 } else {
814 struct slave *slave;
815 int i;
816 bond_for_each_slave(bond, slave, i) {
817 err = dev_set_allmulti(slave->dev, inc);
818 if (err)
819 return err;
822 return err;
826 * Add a Multicast address to slaves
827 * according to mode
829 static void bond_mc_add(struct bonding *bond, void *addr, int alen)
831 if (USES_PRIMARY(bond->params.mode)) {
832 /* write lock already acquired */
833 if (bond->curr_active_slave)
834 dev_mc_add(bond->curr_active_slave->dev, addr, alen, 0);
835 } else {
836 struct slave *slave;
837 int i;
839 bond_for_each_slave(bond, slave, i)
840 dev_mc_add(slave->dev, addr, alen, 0);
845 * Remove a multicast address from slave
846 * according to mode
848 static void bond_mc_delete(struct bonding *bond, void *addr, int alen)
850 if (USES_PRIMARY(bond->params.mode)) {
851 /* write lock already acquired */
852 if (bond->curr_active_slave)
853 dev_mc_delete(bond->curr_active_slave->dev, addr,
854 alen, 0);
855 } else {
856 struct slave *slave;
857 int i;
858 bond_for_each_slave(bond, slave, i) {
859 dev_mc_delete(slave->dev, addr, alen, 0);
866 * Retrieve the list of registered multicast addresses for the bonding
867 * device and retransmit an IGMP JOIN request to the current active
868 * slave.
870 static void bond_resend_igmp_join_requests(struct bonding *bond)
872 struct in_device *in_dev;
873 struct ip_mc_list *im;
875 rcu_read_lock();
876 in_dev = __in_dev_get_rcu(bond->dev);
877 if (in_dev) {
878 for (im = in_dev->mc_list; im; im = im->next)
879 ip_mc_rejoin_group(im);
882 rcu_read_unlock();
886 * Totally destroys the mc_list in bond
888 static void bond_mc_list_destroy(struct bonding *bond)
890 struct dev_mc_list *dmi;
892 dmi = bond->mc_list;
893 while (dmi) {
894 bond->mc_list = dmi->next;
895 kfree(dmi);
896 dmi = bond->mc_list;
899 bond->mc_list = NULL;
903 * Copy all the Multicast addresses from src to the bonding device dst
905 static int bond_mc_list_copy(struct dev_mc_list *mc_list, struct bonding *bond,
906 gfp_t gfp_flag)
908 struct dev_mc_list *dmi, *new_dmi;
910 for (dmi = mc_list; dmi; dmi = dmi->next) {
911 new_dmi = kmalloc(sizeof(struct dev_mc_list), gfp_flag);
913 if (!new_dmi) {
914 /* FIXME: Potential memory leak !!! */
915 return -ENOMEM;
918 new_dmi->next = bond->mc_list;
919 bond->mc_list = new_dmi;
920 new_dmi->dmi_addrlen = dmi->dmi_addrlen;
921 memcpy(new_dmi->dmi_addr, dmi->dmi_addr, dmi->dmi_addrlen);
922 new_dmi->dmi_users = dmi->dmi_users;
923 new_dmi->dmi_gusers = dmi->dmi_gusers;
926 return 0;
930 * flush all members of flush->mc_list from device dev->mc_list
932 static void bond_mc_list_flush(struct net_device *bond_dev,
933 struct net_device *slave_dev)
935 struct bonding *bond = netdev_priv(bond_dev);
936 struct dev_mc_list *dmi;
938 for (dmi = bond_dev->mc_list; dmi; dmi = dmi->next)
939 dev_mc_delete(slave_dev, dmi->dmi_addr, dmi->dmi_addrlen, 0);
941 if (bond->params.mode == BOND_MODE_8023AD) {
942 /* del lacpdu mc addr from mc list */
943 u8 lacpdu_multicast[ETH_ALEN] = MULTICAST_LACPDU_ADDR;
945 dev_mc_delete(slave_dev, lacpdu_multicast, ETH_ALEN, 0);
949 /*--------------------------- Active slave change ---------------------------*/
952 * Update the mc list and multicast-related flags for the new and
953 * old active slaves (if any) according to the multicast mode, and
954 * promiscuous flags unconditionally.
956 static void bond_mc_swap(struct bonding *bond, struct slave *new_active,
957 struct slave *old_active)
959 struct dev_mc_list *dmi;
961 if (!USES_PRIMARY(bond->params.mode))
962 /* nothing to do - mc list is already up-to-date on
963 * all slaves
965 return;
967 if (old_active) {
968 if (bond->dev->flags & IFF_PROMISC)
969 dev_set_promiscuity(old_active->dev, -1);
971 if (bond->dev->flags & IFF_ALLMULTI)
972 dev_set_allmulti(old_active->dev, -1);
974 for (dmi = bond->dev->mc_list; dmi; dmi = dmi->next)
975 dev_mc_delete(old_active->dev, dmi->dmi_addr,
976 dmi->dmi_addrlen, 0);
979 if (new_active) {
980 /* FIXME: Signal errors upstream. */
981 if (bond->dev->flags & IFF_PROMISC)
982 dev_set_promiscuity(new_active->dev, 1);
984 if (bond->dev->flags & IFF_ALLMULTI)
985 dev_set_allmulti(new_active->dev, 1);
987 for (dmi = bond->dev->mc_list; dmi; dmi = dmi->next)
988 dev_mc_add(new_active->dev, dmi->dmi_addr,
989 dmi->dmi_addrlen, 0);
990 bond_resend_igmp_join_requests(bond);
995 * bond_do_fail_over_mac
997 * Perform special MAC address swapping for fail_over_mac settings
999 * Called with RTNL, bond->lock for read, curr_slave_lock for write_bh.
1001 static void bond_do_fail_over_mac(struct bonding *bond,
1002 struct slave *new_active,
1003 struct slave *old_active)
1004 __releases(&bond->curr_slave_lock)
1005 __releases(&bond->lock)
1006 __acquires(&bond->lock)
1007 __acquires(&bond->curr_slave_lock)
1009 u8 tmp_mac[ETH_ALEN];
1010 struct sockaddr saddr;
1011 int rv;
1013 switch (bond->params.fail_over_mac) {
1014 case BOND_FOM_ACTIVE:
1015 if (new_active)
1016 memcpy(bond->dev->dev_addr, new_active->dev->dev_addr,
1017 new_active->dev->addr_len);
1018 break;
1019 case BOND_FOM_FOLLOW:
1021 * if new_active && old_active, swap them
1022 * if just old_active, do nothing (going to no active slave)
1023 * if just new_active, set new_active to bond's MAC
1025 if (!new_active)
1026 return;
1028 write_unlock_bh(&bond->curr_slave_lock);
1029 read_unlock(&bond->lock);
1031 if (old_active) {
1032 memcpy(tmp_mac, new_active->dev->dev_addr, ETH_ALEN);
1033 memcpy(saddr.sa_data, old_active->dev->dev_addr,
1034 ETH_ALEN);
1035 saddr.sa_family = new_active->dev->type;
1036 } else {
1037 memcpy(saddr.sa_data, bond->dev->dev_addr, ETH_ALEN);
1038 saddr.sa_family = bond->dev->type;
1041 rv = dev_set_mac_address(new_active->dev, &saddr);
1042 if (rv) {
1043 pr_err(DRV_NAME
1044 ": %s: Error %d setting MAC of slave %s\n",
1045 bond->dev->name, -rv, new_active->dev->name);
1046 goto out;
1049 if (!old_active)
1050 goto out;
1052 memcpy(saddr.sa_data, tmp_mac, ETH_ALEN);
1053 saddr.sa_family = old_active->dev->type;
1055 rv = dev_set_mac_address(old_active->dev, &saddr);
1056 if (rv)
1057 pr_err(DRV_NAME
1058 ": %s: Error %d setting MAC of slave %s\n",
1059 bond->dev->name, -rv, new_active->dev->name);
1060 out:
1061 read_lock(&bond->lock);
1062 write_lock_bh(&bond->curr_slave_lock);
1063 break;
1064 default:
1065 pr_err(DRV_NAME
1066 ": %s: bond_do_fail_over_mac impossible: bad policy %d\n",
1067 bond->dev->name, bond->params.fail_over_mac);
1068 break;
1075 * find_best_interface - select the best available slave to be the active one
1076 * @bond: our bonding struct
1078 * Warning: Caller must hold curr_slave_lock for writing.
1080 static struct slave *bond_find_best_slave(struct bonding *bond)
1082 struct slave *new_active, *old_active;
1083 struct slave *bestslave = NULL;
1084 int mintime = bond->params.updelay;
1085 int i;
1087 new_active = old_active = bond->curr_active_slave;
1089 if (!new_active) { /* there were no active slaves left */
1090 if (bond->slave_cnt > 0) /* found one slave */
1091 new_active = bond->first_slave;
1092 else
1093 return NULL; /* still no slave, return NULL */
1096 if ((bond->primary_slave) &&
1097 bond->primary_slave->link == BOND_LINK_UP) {
1098 new_active = bond->primary_slave;
1101 /* remember where to stop iterating over the slaves */
1102 old_active = new_active;
1104 bond_for_each_slave_from(bond, new_active, i, old_active) {
1105 if (new_active->link == BOND_LINK_UP) {
1106 return new_active;
1107 } else if (new_active->link == BOND_LINK_BACK &&
1108 IS_UP(new_active->dev)) {
1109 /* link up, but waiting for stabilization */
1110 if (new_active->delay < mintime) {
1111 mintime = new_active->delay;
1112 bestslave = new_active;
1117 return bestslave;
1121 * change_active_interface - change the active slave into the specified one
1122 * @bond: our bonding struct
1123 * @new: the new slave to make the active one
1125 * Set the new slave to the bond's settings and unset them on the old
1126 * curr_active_slave.
1127 * Setting include flags, mc-list, promiscuity, allmulti, etc.
1129 * If @new's link state is %BOND_LINK_BACK we'll set it to %BOND_LINK_UP,
1130 * because it is apparently the best available slave we have, even though its
1131 * updelay hasn't timed out yet.
1133 * If new_active is not NULL, caller must hold bond->lock for read and
1134 * curr_slave_lock for write_bh.
1136 void bond_change_active_slave(struct bonding *bond, struct slave *new_active)
1138 struct slave *old_active = bond->curr_active_slave;
1140 if (old_active == new_active)
1141 return;
1143 if (new_active) {
1144 new_active->jiffies = jiffies;
1146 if (new_active->link == BOND_LINK_BACK) {
1147 if (USES_PRIMARY(bond->params.mode)) {
1148 pr_info(DRV_NAME
1149 ": %s: making interface %s the new "
1150 "active one %d ms earlier.\n",
1151 bond->dev->name, new_active->dev->name,
1152 (bond->params.updelay - new_active->delay) * bond->params.miimon);
1155 new_active->delay = 0;
1156 new_active->link = BOND_LINK_UP;
1158 if (bond->params.mode == BOND_MODE_8023AD)
1159 bond_3ad_handle_link_change(new_active, BOND_LINK_UP);
1161 if (bond_is_lb(bond))
1162 bond_alb_handle_link_change(bond, new_active, BOND_LINK_UP);
1163 } else {
1164 if (USES_PRIMARY(bond->params.mode)) {
1165 pr_info(DRV_NAME
1166 ": %s: making interface %s the new "
1167 "active one.\n",
1168 bond->dev->name, new_active->dev->name);
1173 if (USES_PRIMARY(bond->params.mode))
1174 bond_mc_swap(bond, new_active, old_active);
1176 if (bond_is_lb(bond)) {
1177 bond_alb_handle_active_change(bond, new_active);
1178 if (old_active)
1179 bond_set_slave_inactive_flags(old_active);
1180 if (new_active)
1181 bond_set_slave_active_flags(new_active);
1182 } else {
1183 bond->curr_active_slave = new_active;
1186 if (bond->params.mode == BOND_MODE_ACTIVEBACKUP) {
1187 if (old_active)
1188 bond_set_slave_inactive_flags(old_active);
1190 if (new_active) {
1191 bond_set_slave_active_flags(new_active);
1193 if (bond->params.fail_over_mac)
1194 bond_do_fail_over_mac(bond, new_active,
1195 old_active);
1197 bond->send_grat_arp = bond->params.num_grat_arp;
1198 bond_send_gratuitous_arp(bond);
1200 bond->send_unsol_na = bond->params.num_unsol_na;
1201 bond_send_unsolicited_na(bond);
1203 write_unlock_bh(&bond->curr_slave_lock);
1204 read_unlock(&bond->lock);
1206 netdev_bonding_change(bond->dev, NETDEV_BONDING_FAILOVER);
1208 read_lock(&bond->lock);
1209 write_lock_bh(&bond->curr_slave_lock);
1215 * bond_select_active_slave - select a new active slave, if needed
1216 * @bond: our bonding struct
1218 * This functions should be called when one of the following occurs:
1219 * - The old curr_active_slave has been released or lost its link.
1220 * - The primary_slave has got its link back.
1221 * - A slave has got its link back and there's no old curr_active_slave.
1223 * Caller must hold bond->lock for read and curr_slave_lock for write_bh.
1225 void bond_select_active_slave(struct bonding *bond)
1227 struct slave *best_slave;
1228 int rv;
1230 best_slave = bond_find_best_slave(bond);
1231 if (best_slave != bond->curr_active_slave) {
1232 bond_change_active_slave(bond, best_slave);
1233 rv = bond_set_carrier(bond);
1234 if (!rv)
1235 return;
1237 if (netif_carrier_ok(bond->dev)) {
1238 pr_info(DRV_NAME
1239 ": %s: first active interface up!\n",
1240 bond->dev->name);
1241 } else {
1242 pr_info(DRV_NAME ": %s: "
1243 "now running without any active interface !\n",
1244 bond->dev->name);
1249 /*--------------------------- slave list handling ---------------------------*/
1252 * This function attaches the slave to the end of list.
1254 * bond->lock held for writing by caller.
1256 static void bond_attach_slave(struct bonding *bond, struct slave *new_slave)
1258 if (bond->first_slave == NULL) { /* attaching the first slave */
1259 new_slave->next = new_slave;
1260 new_slave->prev = new_slave;
1261 bond->first_slave = new_slave;
1262 } else {
1263 new_slave->next = bond->first_slave;
1264 new_slave->prev = bond->first_slave->prev;
1265 new_slave->next->prev = new_slave;
1266 new_slave->prev->next = new_slave;
1269 bond->slave_cnt++;
1273 * This function detaches the slave from the list.
1274 * WARNING: no check is made to verify if the slave effectively
1275 * belongs to <bond>.
1276 * Nothing is freed on return, structures are just unchained.
1277 * If any slave pointer in bond was pointing to <slave>,
1278 * it should be changed by the calling function.
1280 * bond->lock held for writing by caller.
1282 static void bond_detach_slave(struct bonding *bond, struct slave *slave)
1284 if (slave->next)
1285 slave->next->prev = slave->prev;
1287 if (slave->prev)
1288 slave->prev->next = slave->next;
1290 if (bond->first_slave == slave) { /* slave is the first slave */
1291 if (bond->slave_cnt > 1) { /* there are more slave */
1292 bond->first_slave = slave->next;
1293 } else {
1294 bond->first_slave = NULL; /* slave was the last one */
1298 slave->next = NULL;
1299 slave->prev = NULL;
1300 bond->slave_cnt--;
1303 /*---------------------------------- IOCTL ----------------------------------*/
1305 static int bond_sethwaddr(struct net_device *bond_dev,
1306 struct net_device *slave_dev)
1308 pr_debug("bond_dev=%p\n", bond_dev);
1309 pr_debug("slave_dev=%p\n", slave_dev);
1310 pr_debug("slave_dev->addr_len=%d\n", slave_dev->addr_len);
1311 memcpy(bond_dev->dev_addr, slave_dev->dev_addr, slave_dev->addr_len);
1312 return 0;
1315 #define BOND_VLAN_FEATURES \
1316 (NETIF_F_VLAN_CHALLENGED | NETIF_F_HW_VLAN_RX | NETIF_F_HW_VLAN_TX | \
1317 NETIF_F_HW_VLAN_FILTER)
1320 * Compute the common dev->feature set available to all slaves. Some
1321 * feature bits are managed elsewhere, so preserve those feature bits
1322 * on the master device.
1324 static int bond_compute_features(struct bonding *bond)
1326 struct slave *slave;
1327 struct net_device *bond_dev = bond->dev;
1328 unsigned long features = bond_dev->features;
1329 unsigned long vlan_features = 0;
1330 unsigned short max_hard_header_len = max((u16)ETH_HLEN,
1331 bond_dev->hard_header_len);
1332 int i;
1334 features &= ~(NETIF_F_ALL_CSUM | BOND_VLAN_FEATURES);
1335 features |= NETIF_F_GSO_MASK | NETIF_F_NO_CSUM;
1337 if (!bond->first_slave)
1338 goto done;
1340 features &= ~NETIF_F_ONE_FOR_ALL;
1342 vlan_features = bond->first_slave->dev->vlan_features;
1343 bond_for_each_slave(bond, slave, i) {
1344 features = netdev_increment_features(features,
1345 slave->dev->features,
1346 NETIF_F_ONE_FOR_ALL);
1347 vlan_features = netdev_increment_features(vlan_features,
1348 slave->dev->vlan_features,
1349 NETIF_F_ONE_FOR_ALL);
1350 if (slave->dev->hard_header_len > max_hard_header_len)
1351 max_hard_header_len = slave->dev->hard_header_len;
1354 done:
1355 features |= (bond_dev->features & BOND_VLAN_FEATURES);
1356 bond_dev->features = netdev_fix_features(features, NULL);
1357 bond_dev->vlan_features = netdev_fix_features(vlan_features, NULL);
1358 bond_dev->hard_header_len = max_hard_header_len;
1360 return 0;
1363 static void bond_setup_by_slave(struct net_device *bond_dev,
1364 struct net_device *slave_dev)
1366 struct bonding *bond = netdev_priv(bond_dev);
1368 bond_dev->header_ops = slave_dev->header_ops;
1370 bond_dev->type = slave_dev->type;
1371 bond_dev->hard_header_len = slave_dev->hard_header_len;
1372 bond_dev->addr_len = slave_dev->addr_len;
1374 memcpy(bond_dev->broadcast, slave_dev->broadcast,
1375 slave_dev->addr_len);
1376 bond->setup_by_slave = 1;
1379 /* enslave device <slave> to bond device <master> */
1380 int bond_enslave(struct net_device *bond_dev, struct net_device *slave_dev)
1382 struct bonding *bond = netdev_priv(bond_dev);
1383 const struct net_device_ops *slave_ops = slave_dev->netdev_ops;
1384 struct slave *new_slave = NULL;
1385 struct dev_mc_list *dmi;
1386 struct sockaddr addr;
1387 int link_reporting;
1388 int old_features = bond_dev->features;
1389 int res = 0;
1391 if (!bond->params.use_carrier && slave_dev->ethtool_ops == NULL &&
1392 slave_ops->ndo_do_ioctl == NULL) {
1393 pr_warning(DRV_NAME
1394 ": %s: Warning: no link monitoring support for %s\n",
1395 bond_dev->name, slave_dev->name);
1398 /* bond must be initialized by bond_open() before enslaving */
1399 if (!(bond_dev->flags & IFF_UP)) {
1400 pr_warning(DRV_NAME
1401 " %s: master_dev is not up in bond_enslave\n",
1402 bond_dev->name);
1405 /* already enslaved */
1406 if (slave_dev->flags & IFF_SLAVE) {
1407 pr_debug("Error, Device was already enslaved\n");
1408 return -EBUSY;
1411 /* vlan challenged mutual exclusion */
1412 /* no need to lock since we're protected by rtnl_lock */
1413 if (slave_dev->features & NETIF_F_VLAN_CHALLENGED) {
1414 pr_debug("%s: NETIF_F_VLAN_CHALLENGED\n", slave_dev->name);
1415 if (!list_empty(&bond->vlan_list)) {
1416 pr_err(DRV_NAME
1417 ": %s: Error: cannot enslave VLAN "
1418 "challenged slave %s on VLAN enabled "
1419 "bond %s\n", bond_dev->name, slave_dev->name,
1420 bond_dev->name);
1421 return -EPERM;
1422 } else {
1423 pr_warning(DRV_NAME
1424 ": %s: Warning: enslaved VLAN challenged "
1425 "slave %s. Adding VLANs will be blocked as "
1426 "long as %s is part of bond %s\n",
1427 bond_dev->name, slave_dev->name, slave_dev->name,
1428 bond_dev->name);
1429 bond_dev->features |= NETIF_F_VLAN_CHALLENGED;
1431 } else {
1432 pr_debug("%s: ! NETIF_F_VLAN_CHALLENGED\n", slave_dev->name);
1433 if (bond->slave_cnt == 0) {
1434 /* First slave, and it is not VLAN challenged,
1435 * so remove the block of adding VLANs over the bond.
1437 bond_dev->features &= ~NETIF_F_VLAN_CHALLENGED;
1442 * Old ifenslave binaries are no longer supported. These can
1443 * be identified with moderate accuracy by the state of the slave:
1444 * the current ifenslave will set the interface down prior to
1445 * enslaving it; the old ifenslave will not.
1447 if ((slave_dev->flags & IFF_UP)) {
1448 pr_err(DRV_NAME ": %s is up. "
1449 "This may be due to an out of date ifenslave.\n",
1450 slave_dev->name);
1451 res = -EPERM;
1452 goto err_undo_flags;
1455 /* set bonding device ether type by slave - bonding netdevices are
1456 * created with ether_setup, so when the slave type is not ARPHRD_ETHER
1457 * there is a need to override some of the type dependent attribs/funcs.
1459 * bond ether type mutual exclusion - don't allow slaves of dissimilar
1460 * ether type (eg ARPHRD_ETHER and ARPHRD_INFINIBAND) share the same bond
1462 if (bond->slave_cnt == 0) {
1463 if (bond_dev->type != slave_dev->type) {
1464 pr_debug("%s: change device type from %d to %d\n",
1465 bond_dev->name, bond_dev->type, slave_dev->type);
1467 netdev_bonding_change(bond_dev, NETDEV_BONDING_OLDTYPE);
1469 if (slave_dev->type != ARPHRD_ETHER)
1470 bond_setup_by_slave(bond_dev, slave_dev);
1471 else
1472 ether_setup(bond_dev);
1474 netdev_bonding_change(bond_dev, NETDEV_BONDING_NEWTYPE);
1476 } else if (bond_dev->type != slave_dev->type) {
1477 pr_err(DRV_NAME ": %s ether type (%d) is different "
1478 "from other slaves (%d), can not enslave it.\n",
1479 slave_dev->name,
1480 slave_dev->type, bond_dev->type);
1481 res = -EINVAL;
1482 goto err_undo_flags;
1485 if (slave_ops->ndo_set_mac_address == NULL) {
1486 if (bond->slave_cnt == 0) {
1487 pr_warning(DRV_NAME
1488 ": %s: Warning: The first slave device "
1489 "specified does not support setting the MAC "
1490 "address. Setting fail_over_mac to active.",
1491 bond_dev->name);
1492 bond->params.fail_over_mac = BOND_FOM_ACTIVE;
1493 } else if (bond->params.fail_over_mac != BOND_FOM_ACTIVE) {
1494 pr_err(DRV_NAME
1495 ": %s: Error: The slave device specified "
1496 "does not support setting the MAC address, "
1497 "but fail_over_mac is not set to active.\n"
1498 , bond_dev->name);
1499 res = -EOPNOTSUPP;
1500 goto err_undo_flags;
1504 new_slave = kzalloc(sizeof(struct slave), GFP_KERNEL);
1505 if (!new_slave) {
1506 res = -ENOMEM;
1507 goto err_undo_flags;
1510 /* save slave's original flags before calling
1511 * netdev_set_master and dev_open
1513 new_slave->original_flags = slave_dev->flags;
1516 * Save slave's original ("permanent") mac address for modes
1517 * that need it, and for restoring it upon release, and then
1518 * set it to the master's address
1520 memcpy(new_slave->perm_hwaddr, slave_dev->dev_addr, ETH_ALEN);
1522 if (!bond->params.fail_over_mac) {
1524 * Set slave to master's mac address. The application already
1525 * set the master's mac address to that of the first slave
1527 memcpy(addr.sa_data, bond_dev->dev_addr, bond_dev->addr_len);
1528 addr.sa_family = slave_dev->type;
1529 res = dev_set_mac_address(slave_dev, &addr);
1530 if (res) {
1531 pr_debug("Error %d calling set_mac_address\n", res);
1532 goto err_free;
1536 res = netdev_set_master(slave_dev, bond_dev);
1537 if (res) {
1538 pr_debug("Error %d calling netdev_set_master\n", res);
1539 goto err_restore_mac;
1541 /* open the slave since the application closed it */
1542 res = dev_open(slave_dev);
1543 if (res) {
1544 pr_debug("Opening slave %s failed\n", slave_dev->name);
1545 goto err_unset_master;
1548 new_slave->dev = slave_dev;
1549 slave_dev->priv_flags |= IFF_BONDING;
1551 if (bond_is_lb(bond)) {
1552 /* bond_alb_init_slave() must be called before all other stages since
1553 * it might fail and we do not want to have to undo everything
1555 res = bond_alb_init_slave(bond, new_slave);
1556 if (res)
1557 goto err_close;
1560 /* If the mode USES_PRIMARY, then the new slave gets the
1561 * master's promisc (and mc) settings only if it becomes the
1562 * curr_active_slave, and that is taken care of later when calling
1563 * bond_change_active()
1565 if (!USES_PRIMARY(bond->params.mode)) {
1566 /* set promiscuity level to new slave */
1567 if (bond_dev->flags & IFF_PROMISC) {
1568 res = dev_set_promiscuity(slave_dev, 1);
1569 if (res)
1570 goto err_close;
1573 /* set allmulti level to new slave */
1574 if (bond_dev->flags & IFF_ALLMULTI) {
1575 res = dev_set_allmulti(slave_dev, 1);
1576 if (res)
1577 goto err_close;
1580 netif_addr_lock_bh(bond_dev);
1581 /* upload master's mc_list to new slave */
1582 for (dmi = bond_dev->mc_list; dmi; dmi = dmi->next)
1583 dev_mc_add(slave_dev, dmi->dmi_addr,
1584 dmi->dmi_addrlen, 0);
1585 netif_addr_unlock_bh(bond_dev);
1588 if (bond->params.mode == BOND_MODE_8023AD) {
1589 /* add lacpdu mc addr to mc list */
1590 u8 lacpdu_multicast[ETH_ALEN] = MULTICAST_LACPDU_ADDR;
1592 dev_mc_add(slave_dev, lacpdu_multicast, ETH_ALEN, 0);
1595 bond_add_vlans_on_slave(bond, slave_dev);
1597 write_lock_bh(&bond->lock);
1599 bond_attach_slave(bond, new_slave);
1601 new_slave->delay = 0;
1602 new_slave->link_failure_count = 0;
1604 bond_compute_features(bond);
1606 write_unlock_bh(&bond->lock);
1608 read_lock(&bond->lock);
1610 new_slave->last_arp_rx = jiffies;
1612 if (bond->params.miimon && !bond->params.use_carrier) {
1613 link_reporting = bond_check_dev_link(bond, slave_dev, 1);
1615 if ((link_reporting == -1) && !bond->params.arp_interval) {
1617 * miimon is set but a bonded network driver
1618 * does not support ETHTOOL/MII and
1619 * arp_interval is not set. Note: if
1620 * use_carrier is enabled, we will never go
1621 * here (because netif_carrier is always
1622 * supported); thus, we don't need to change
1623 * the messages for netif_carrier.
1625 pr_warning(DRV_NAME
1626 ": %s: Warning: MII and ETHTOOL support not "
1627 "available for interface %s, and "
1628 "arp_interval/arp_ip_target module parameters "
1629 "not specified, thus bonding will not detect "
1630 "link failures! see bonding.txt for details.\n",
1631 bond_dev->name, slave_dev->name);
1632 } else if (link_reporting == -1) {
1633 /* unable get link status using mii/ethtool */
1634 pr_warning(DRV_NAME
1635 ": %s: Warning: can't get link status from "
1636 "interface %s; the network driver associated "
1637 "with this interface does not support MII or "
1638 "ETHTOOL link status reporting, thus miimon "
1639 "has no effect on this interface.\n",
1640 bond_dev->name, slave_dev->name);
1644 /* check for initial state */
1645 if (!bond->params.miimon ||
1646 (bond_check_dev_link(bond, slave_dev, 0) == BMSR_LSTATUS)) {
1647 if (bond->params.updelay) {
1648 pr_debug("Initial state of slave_dev is "
1649 "BOND_LINK_BACK\n");
1650 new_slave->link = BOND_LINK_BACK;
1651 new_slave->delay = bond->params.updelay;
1652 } else {
1653 pr_debug("Initial state of slave_dev is "
1654 "BOND_LINK_UP\n");
1655 new_slave->link = BOND_LINK_UP;
1657 new_slave->jiffies = jiffies;
1658 } else {
1659 pr_debug("Initial state of slave_dev is "
1660 "BOND_LINK_DOWN\n");
1661 new_slave->link = BOND_LINK_DOWN;
1664 if (bond_update_speed_duplex(new_slave) &&
1665 (new_slave->link != BOND_LINK_DOWN)) {
1666 pr_warning(DRV_NAME
1667 ": %s: Warning: failed to get speed and duplex from %s, "
1668 "assumed to be 100Mb/sec and Full.\n",
1669 bond_dev->name, new_slave->dev->name);
1671 if (bond->params.mode == BOND_MODE_8023AD) {
1672 pr_warning(DRV_NAME
1673 ": %s: Warning: Operation of 802.3ad mode requires ETHTOOL "
1674 "support in base driver for proper aggregator "
1675 "selection.\n", bond_dev->name);
1679 if (USES_PRIMARY(bond->params.mode) && bond->params.primary[0]) {
1680 /* if there is a primary slave, remember it */
1681 if (strcmp(bond->params.primary, new_slave->dev->name) == 0)
1682 bond->primary_slave = new_slave;
1685 write_lock_bh(&bond->curr_slave_lock);
1687 switch (bond->params.mode) {
1688 case BOND_MODE_ACTIVEBACKUP:
1689 bond_set_slave_inactive_flags(new_slave);
1690 bond_select_active_slave(bond);
1691 break;
1692 case BOND_MODE_8023AD:
1693 /* in 802.3ad mode, the internal mechanism
1694 * will activate the slaves in the selected
1695 * aggregator
1697 bond_set_slave_inactive_flags(new_slave);
1698 /* if this is the first slave */
1699 if (bond->slave_cnt == 1) {
1700 SLAVE_AD_INFO(new_slave).id = 1;
1701 /* Initialize AD with the number of times that the AD timer is called in 1 second
1702 * can be called only after the mac address of the bond is set
1704 bond_3ad_initialize(bond, 1000/AD_TIMER_INTERVAL,
1705 bond->params.lacp_fast);
1706 } else {
1707 SLAVE_AD_INFO(new_slave).id =
1708 SLAVE_AD_INFO(new_slave->prev).id + 1;
1711 bond_3ad_bind_slave(new_slave);
1712 break;
1713 case BOND_MODE_TLB:
1714 case BOND_MODE_ALB:
1715 new_slave->state = BOND_STATE_ACTIVE;
1716 bond_set_slave_inactive_flags(new_slave);
1717 bond_select_active_slave(bond);
1718 break;
1719 default:
1720 pr_debug("This slave is always active in trunk mode\n");
1722 /* always active in trunk mode */
1723 new_slave->state = BOND_STATE_ACTIVE;
1725 /* In trunking mode there is little meaning to curr_active_slave
1726 * anyway (it holds no special properties of the bond device),
1727 * so we can change it without calling change_active_interface()
1729 if (!bond->curr_active_slave)
1730 bond->curr_active_slave = new_slave;
1732 break;
1733 } /* switch(bond_mode) */
1735 write_unlock_bh(&bond->curr_slave_lock);
1737 bond_set_carrier(bond);
1739 read_unlock(&bond->lock);
1741 res = bond_create_slave_symlinks(bond_dev, slave_dev);
1742 if (res)
1743 goto err_close;
1745 pr_info(DRV_NAME
1746 ": %s: enslaving %s as a%s interface with a%s link.\n",
1747 bond_dev->name, slave_dev->name,
1748 new_slave->state == BOND_STATE_ACTIVE ? "n active" : " backup",
1749 new_slave->link != BOND_LINK_DOWN ? "n up" : " down");
1751 /* enslave is successful */
1752 return 0;
1754 /* Undo stages on error */
1755 err_close:
1756 dev_close(slave_dev);
1758 err_unset_master:
1759 netdev_set_master(slave_dev, NULL);
1761 err_restore_mac:
1762 if (!bond->params.fail_over_mac) {
1763 /* XXX TODO - fom follow mode needs to change master's
1764 * MAC if this slave's MAC is in use by the bond, or at
1765 * least print a warning.
1767 memcpy(addr.sa_data, new_slave->perm_hwaddr, ETH_ALEN);
1768 addr.sa_family = slave_dev->type;
1769 dev_set_mac_address(slave_dev, &addr);
1772 err_free:
1773 kfree(new_slave);
1775 err_undo_flags:
1776 bond_dev->features = old_features;
1778 return res;
1782 * Try to release the slave device <slave> from the bond device <master>
1783 * It is legal to access curr_active_slave without a lock because all the function
1784 * is write-locked.
1786 * The rules for slave state should be:
1787 * for Active/Backup:
1788 * Active stays on all backups go down
1789 * for Bonded connections:
1790 * The first up interface should be left on and all others downed.
1792 int bond_release(struct net_device *bond_dev, struct net_device *slave_dev)
1794 struct bonding *bond = netdev_priv(bond_dev);
1795 struct slave *slave, *oldcurrent;
1796 struct sockaddr addr;
1798 /* slave is not a slave or master is not master of this slave */
1799 if (!(slave_dev->flags & IFF_SLAVE) ||
1800 (slave_dev->master != bond_dev)) {
1801 pr_err(DRV_NAME
1802 ": %s: Error: cannot release %s.\n",
1803 bond_dev->name, slave_dev->name);
1804 return -EINVAL;
1807 write_lock_bh(&bond->lock);
1809 slave = bond_get_slave_by_dev(bond, slave_dev);
1810 if (!slave) {
1811 /* not a slave of this bond */
1812 pr_info(DRV_NAME
1813 ": %s: %s not enslaved\n",
1814 bond_dev->name, slave_dev->name);
1815 write_unlock_bh(&bond->lock);
1816 return -EINVAL;
1819 if (!bond->params.fail_over_mac) {
1820 if (!compare_ether_addr(bond_dev->dev_addr, slave->perm_hwaddr)
1821 && bond->slave_cnt > 1)
1822 pr_warning(DRV_NAME
1823 ": %s: Warning: the permanent HWaddr of %s - "
1824 "%pM - is still in use by %s. "
1825 "Set the HWaddr of %s to a different address "
1826 "to avoid conflicts.\n",
1827 bond_dev->name, slave_dev->name,
1828 slave->perm_hwaddr,
1829 bond_dev->name, slave_dev->name);
1832 /* Inform AD package of unbinding of slave. */
1833 if (bond->params.mode == BOND_MODE_8023AD) {
1834 /* must be called before the slave is
1835 * detached from the list
1837 bond_3ad_unbind_slave(slave);
1840 pr_info(DRV_NAME
1841 ": %s: releasing %s interface %s\n",
1842 bond_dev->name,
1843 (slave->state == BOND_STATE_ACTIVE)
1844 ? "active" : "backup",
1845 slave_dev->name);
1847 oldcurrent = bond->curr_active_slave;
1849 bond->current_arp_slave = NULL;
1851 /* release the slave from its bond */
1852 bond_detach_slave(bond, slave);
1854 bond_compute_features(bond);
1856 if (bond->primary_slave == slave)
1857 bond->primary_slave = NULL;
1859 if (oldcurrent == slave)
1860 bond_change_active_slave(bond, NULL);
1862 if (bond_is_lb(bond)) {
1863 /* Must be called only after the slave has been
1864 * detached from the list and the curr_active_slave
1865 * has been cleared (if our_slave == old_current),
1866 * but before a new active slave is selected.
1868 write_unlock_bh(&bond->lock);
1869 bond_alb_deinit_slave(bond, slave);
1870 write_lock_bh(&bond->lock);
1873 if (oldcurrent == slave) {
1875 * Note that we hold RTNL over this sequence, so there
1876 * is no concern that another slave add/remove event
1877 * will interfere.
1879 write_unlock_bh(&bond->lock);
1880 read_lock(&bond->lock);
1881 write_lock_bh(&bond->curr_slave_lock);
1883 bond_select_active_slave(bond);
1885 write_unlock_bh(&bond->curr_slave_lock);
1886 read_unlock(&bond->lock);
1887 write_lock_bh(&bond->lock);
1890 if (bond->slave_cnt == 0) {
1891 bond_set_carrier(bond);
1893 /* if the last slave was removed, zero the mac address
1894 * of the master so it will be set by the application
1895 * to the mac address of the first slave
1897 memset(bond_dev->dev_addr, 0, bond_dev->addr_len);
1899 if (list_empty(&bond->vlan_list)) {
1900 bond_dev->features |= NETIF_F_VLAN_CHALLENGED;
1901 } else {
1902 pr_warning(DRV_NAME
1903 ": %s: Warning: clearing HW address of %s while it "
1904 "still has VLANs.\n",
1905 bond_dev->name, bond_dev->name);
1906 pr_warning(DRV_NAME
1907 ": %s: When re-adding slaves, make sure the bond's "
1908 "HW address matches its VLANs'.\n",
1909 bond_dev->name);
1911 } else if ((bond_dev->features & NETIF_F_VLAN_CHALLENGED) &&
1912 !bond_has_challenged_slaves(bond)) {
1913 pr_info(DRV_NAME
1914 ": %s: last VLAN challenged slave %s "
1915 "left bond %s. VLAN blocking is removed\n",
1916 bond_dev->name, slave_dev->name, bond_dev->name);
1917 bond_dev->features &= ~NETIF_F_VLAN_CHALLENGED;
1920 write_unlock_bh(&bond->lock);
1922 /* must do this from outside any spinlocks */
1923 bond_destroy_slave_symlinks(bond_dev, slave_dev);
1925 bond_del_vlans_from_slave(bond, slave_dev);
1927 /* If the mode USES_PRIMARY, then we should only remove its
1928 * promisc and mc settings if it was the curr_active_slave, but that was
1929 * already taken care of above when we detached the slave
1931 if (!USES_PRIMARY(bond->params.mode)) {
1932 /* unset promiscuity level from slave */
1933 if (bond_dev->flags & IFF_PROMISC)
1934 dev_set_promiscuity(slave_dev, -1);
1936 /* unset allmulti level from slave */
1937 if (bond_dev->flags & IFF_ALLMULTI)
1938 dev_set_allmulti(slave_dev, -1);
1940 /* flush master's mc_list from slave */
1941 netif_addr_lock_bh(bond_dev);
1942 bond_mc_list_flush(bond_dev, slave_dev);
1943 netif_addr_unlock_bh(bond_dev);
1946 netdev_set_master(slave_dev, NULL);
1948 /* close slave before restoring its mac address */
1949 dev_close(slave_dev);
1951 if (bond->params.fail_over_mac != BOND_FOM_ACTIVE) {
1952 /* restore original ("permanent") mac address */
1953 memcpy(addr.sa_data, slave->perm_hwaddr, ETH_ALEN);
1954 addr.sa_family = slave_dev->type;
1955 dev_set_mac_address(slave_dev, &addr);
1958 slave_dev->priv_flags &= ~(IFF_MASTER_8023AD | IFF_MASTER_ALB |
1959 IFF_SLAVE_INACTIVE | IFF_BONDING |
1960 IFF_SLAVE_NEEDARP);
1962 kfree(slave);
1964 return 0; /* deletion OK */
1968 * Destroy a bonding device.
1969 * Must be under rtnl_lock when this function is called.
1971 static void bond_uninit(struct net_device *bond_dev)
1973 struct bonding *bond = netdev_priv(bond_dev);
1975 bond_deinit(bond_dev);
1976 bond_destroy_sysfs_entry(bond);
1978 if (bond->wq)
1979 destroy_workqueue(bond->wq);
1981 netif_addr_lock_bh(bond_dev);
1982 bond_mc_list_destroy(bond);
1983 netif_addr_unlock_bh(bond_dev);
1987 * First release a slave and than destroy the bond if no more slaves are left.
1988 * Must be under rtnl_lock when this function is called.
1990 int bond_release_and_destroy(struct net_device *bond_dev,
1991 struct net_device *slave_dev)
1993 struct bonding *bond = netdev_priv(bond_dev);
1994 int ret;
1996 ret = bond_release(bond_dev, slave_dev);
1997 if ((ret == 0) && (bond->slave_cnt == 0)) {
1998 pr_info(DRV_NAME ": %s: destroying bond %s.\n",
1999 bond_dev->name, bond_dev->name);
2000 unregister_netdevice(bond_dev);
2002 return ret;
2006 * This function releases all slaves.
2008 static int bond_release_all(struct net_device *bond_dev)
2010 struct bonding *bond = netdev_priv(bond_dev);
2011 struct slave *slave;
2012 struct net_device *slave_dev;
2013 struct sockaddr addr;
2015 write_lock_bh(&bond->lock);
2017 netif_carrier_off(bond_dev);
2019 if (bond->slave_cnt == 0)
2020 goto out;
2022 bond->current_arp_slave = NULL;
2023 bond->primary_slave = NULL;
2024 bond_change_active_slave(bond, NULL);
2026 while ((slave = bond->first_slave) != NULL) {
2027 /* Inform AD package of unbinding of slave
2028 * before slave is detached from the list.
2030 if (bond->params.mode == BOND_MODE_8023AD)
2031 bond_3ad_unbind_slave(slave);
2033 slave_dev = slave->dev;
2034 bond_detach_slave(bond, slave);
2036 /* now that the slave is detached, unlock and perform
2037 * all the undo steps that should not be called from
2038 * within a lock.
2040 write_unlock_bh(&bond->lock);
2042 if (bond_is_lb(bond)) {
2043 /* must be called only after the slave
2044 * has been detached from the list
2046 bond_alb_deinit_slave(bond, slave);
2049 bond_compute_features(bond);
2051 bond_destroy_slave_symlinks(bond_dev, slave_dev);
2052 bond_del_vlans_from_slave(bond, slave_dev);
2054 /* If the mode USES_PRIMARY, then we should only remove its
2055 * promisc and mc settings if it was the curr_active_slave, but that was
2056 * already taken care of above when we detached the slave
2058 if (!USES_PRIMARY(bond->params.mode)) {
2059 /* unset promiscuity level from slave */
2060 if (bond_dev->flags & IFF_PROMISC)
2061 dev_set_promiscuity(slave_dev, -1);
2063 /* unset allmulti level from slave */
2064 if (bond_dev->flags & IFF_ALLMULTI)
2065 dev_set_allmulti(slave_dev, -1);
2067 /* flush master's mc_list from slave */
2068 netif_addr_lock_bh(bond_dev);
2069 bond_mc_list_flush(bond_dev, slave_dev);
2070 netif_addr_unlock_bh(bond_dev);
2073 netdev_set_master(slave_dev, NULL);
2075 /* close slave before restoring its mac address */
2076 dev_close(slave_dev);
2078 if (!bond->params.fail_over_mac) {
2079 /* restore original ("permanent") mac address*/
2080 memcpy(addr.sa_data, slave->perm_hwaddr, ETH_ALEN);
2081 addr.sa_family = slave_dev->type;
2082 dev_set_mac_address(slave_dev, &addr);
2085 slave_dev->priv_flags &= ~(IFF_MASTER_8023AD | IFF_MASTER_ALB |
2086 IFF_SLAVE_INACTIVE);
2088 kfree(slave);
2090 /* re-acquire the lock before getting the next slave */
2091 write_lock_bh(&bond->lock);
2094 /* zero the mac address of the master so it will be
2095 * set by the application to the mac address of the
2096 * first slave
2098 memset(bond_dev->dev_addr, 0, bond_dev->addr_len);
2100 if (list_empty(&bond->vlan_list))
2101 bond_dev->features |= NETIF_F_VLAN_CHALLENGED;
2102 else {
2103 pr_warning(DRV_NAME
2104 ": %s: Warning: clearing HW address of %s while it "
2105 "still has VLANs.\n",
2106 bond_dev->name, bond_dev->name);
2107 pr_warning(DRV_NAME
2108 ": %s: When re-adding slaves, make sure the bond's "
2109 "HW address matches its VLANs'.\n",
2110 bond_dev->name);
2113 pr_info(DRV_NAME
2114 ": %s: released all slaves\n",
2115 bond_dev->name);
2117 out:
2118 write_unlock_bh(&bond->lock);
2120 return 0;
2124 * This function changes the active slave to slave <slave_dev>.
2125 * It returns -EINVAL in the following cases.
2126 * - <slave_dev> is not found in the list.
2127 * - There is not active slave now.
2128 * - <slave_dev> is already active.
2129 * - The link state of <slave_dev> is not BOND_LINK_UP.
2130 * - <slave_dev> is not running.
2131 * In these cases, this function does nothing.
2132 * In the other cases, current_slave pointer is changed and 0 is returned.
2134 static int bond_ioctl_change_active(struct net_device *bond_dev, struct net_device *slave_dev)
2136 struct bonding *bond = netdev_priv(bond_dev);
2137 struct slave *old_active = NULL;
2138 struct slave *new_active = NULL;
2139 int res = 0;
2141 if (!USES_PRIMARY(bond->params.mode))
2142 return -EINVAL;
2144 /* Verify that master_dev is indeed the master of slave_dev */
2145 if (!(slave_dev->flags & IFF_SLAVE) || (slave_dev->master != bond_dev))
2146 return -EINVAL;
2148 read_lock(&bond->lock);
2150 read_lock(&bond->curr_slave_lock);
2151 old_active = bond->curr_active_slave;
2152 read_unlock(&bond->curr_slave_lock);
2154 new_active = bond_get_slave_by_dev(bond, slave_dev);
2157 * Changing to the current active: do nothing; return success.
2159 if (new_active && (new_active == old_active)) {
2160 read_unlock(&bond->lock);
2161 return 0;
2164 if ((new_active) &&
2165 (old_active) &&
2166 (new_active->link == BOND_LINK_UP) &&
2167 IS_UP(new_active->dev)) {
2168 write_lock_bh(&bond->curr_slave_lock);
2169 bond_change_active_slave(bond, new_active);
2170 write_unlock_bh(&bond->curr_slave_lock);
2171 } else
2172 res = -EINVAL;
2174 read_unlock(&bond->lock);
2176 return res;
2179 static int bond_info_query(struct net_device *bond_dev, struct ifbond *info)
2181 struct bonding *bond = netdev_priv(bond_dev);
2183 info->bond_mode = bond->params.mode;
2184 info->miimon = bond->params.miimon;
2186 read_lock(&bond->lock);
2187 info->num_slaves = bond->slave_cnt;
2188 read_unlock(&bond->lock);
2190 return 0;
2193 static int bond_slave_info_query(struct net_device *bond_dev, struct ifslave *info)
2195 struct bonding *bond = netdev_priv(bond_dev);
2196 struct slave *slave;
2197 int i, res = -ENODEV;
2199 read_lock(&bond->lock);
2201 bond_for_each_slave(bond, slave, i) {
2202 if (i == (int)info->slave_id) {
2203 res = 0;
2204 strcpy(info->slave_name, slave->dev->name);
2205 info->link = slave->link;
2206 info->state = slave->state;
2207 info->link_failure_count = slave->link_failure_count;
2208 break;
2212 read_unlock(&bond->lock);
2214 return res;
2217 /*-------------------------------- Monitoring -------------------------------*/
2220 static int bond_miimon_inspect(struct bonding *bond)
2222 struct slave *slave;
2223 int i, link_state, commit = 0;
2224 bool ignore_updelay;
2226 ignore_updelay = !bond->curr_active_slave ? true : false;
2228 bond_for_each_slave(bond, slave, i) {
2229 slave->new_link = BOND_LINK_NOCHANGE;
2231 link_state = bond_check_dev_link(bond, slave->dev, 0);
2233 switch (slave->link) {
2234 case BOND_LINK_UP:
2235 if (link_state)
2236 continue;
2238 slave->link = BOND_LINK_FAIL;
2239 slave->delay = bond->params.downdelay;
2240 if (slave->delay) {
2241 pr_info(DRV_NAME
2242 ": %s: link status down for %s"
2243 "interface %s, disabling it in %d ms.\n",
2244 bond->dev->name,
2245 (bond->params.mode ==
2246 BOND_MODE_ACTIVEBACKUP) ?
2247 ((slave->state == BOND_STATE_ACTIVE) ?
2248 "active " : "backup ") : "",
2249 slave->dev->name,
2250 bond->params.downdelay * bond->params.miimon);
2252 /*FALLTHRU*/
2253 case BOND_LINK_FAIL:
2254 if (link_state) {
2256 * recovered before downdelay expired
2258 slave->link = BOND_LINK_UP;
2259 slave->jiffies = jiffies;
2260 pr_info(DRV_NAME
2261 ": %s: link status up again after %d "
2262 "ms for interface %s.\n",
2263 bond->dev->name,
2264 (bond->params.downdelay - slave->delay) *
2265 bond->params.miimon,
2266 slave->dev->name);
2267 continue;
2270 if (slave->delay <= 0) {
2271 slave->new_link = BOND_LINK_DOWN;
2272 commit++;
2273 continue;
2276 slave->delay--;
2277 break;
2279 case BOND_LINK_DOWN:
2280 if (!link_state)
2281 continue;
2283 slave->link = BOND_LINK_BACK;
2284 slave->delay = bond->params.updelay;
2286 if (slave->delay) {
2287 pr_info(DRV_NAME
2288 ": %s: link status up for "
2289 "interface %s, enabling it in %d ms.\n",
2290 bond->dev->name, slave->dev->name,
2291 ignore_updelay ? 0 :
2292 bond->params.updelay *
2293 bond->params.miimon);
2295 /*FALLTHRU*/
2296 case BOND_LINK_BACK:
2297 if (!link_state) {
2298 slave->link = BOND_LINK_DOWN;
2299 pr_info(DRV_NAME
2300 ": %s: link status down again after %d "
2301 "ms for interface %s.\n",
2302 bond->dev->name,
2303 (bond->params.updelay - slave->delay) *
2304 bond->params.miimon,
2305 slave->dev->name);
2307 continue;
2310 if (ignore_updelay)
2311 slave->delay = 0;
2313 if (slave->delay <= 0) {
2314 slave->new_link = BOND_LINK_UP;
2315 commit++;
2316 ignore_updelay = false;
2317 continue;
2320 slave->delay--;
2321 break;
2325 return commit;
2328 static void bond_miimon_commit(struct bonding *bond)
2330 struct slave *slave;
2331 int i;
2333 bond_for_each_slave(bond, slave, i) {
2334 switch (slave->new_link) {
2335 case BOND_LINK_NOCHANGE:
2336 continue;
2338 case BOND_LINK_UP:
2339 slave->link = BOND_LINK_UP;
2340 slave->jiffies = jiffies;
2342 if (bond->params.mode == BOND_MODE_8023AD) {
2343 /* prevent it from being the active one */
2344 slave->state = BOND_STATE_BACKUP;
2345 } else if (bond->params.mode != BOND_MODE_ACTIVEBACKUP) {
2346 /* make it immediately active */
2347 slave->state = BOND_STATE_ACTIVE;
2348 } else if (slave != bond->primary_slave) {
2349 /* prevent it from being the active one */
2350 slave->state = BOND_STATE_BACKUP;
2353 pr_info(DRV_NAME
2354 ": %s: link status definitely "
2355 "up for interface %s.\n",
2356 bond->dev->name, slave->dev->name);
2358 /* notify ad that the link status has changed */
2359 if (bond->params.mode == BOND_MODE_8023AD)
2360 bond_3ad_handle_link_change(slave, BOND_LINK_UP);
2362 if (bond_is_lb(bond))
2363 bond_alb_handle_link_change(bond, slave,
2364 BOND_LINK_UP);
2366 if (!bond->curr_active_slave ||
2367 (slave == bond->primary_slave))
2368 goto do_failover;
2370 continue;
2372 case BOND_LINK_DOWN:
2373 if (slave->link_failure_count < UINT_MAX)
2374 slave->link_failure_count++;
2376 slave->link = BOND_LINK_DOWN;
2378 if (bond->params.mode == BOND_MODE_ACTIVEBACKUP ||
2379 bond->params.mode == BOND_MODE_8023AD)
2380 bond_set_slave_inactive_flags(slave);
2382 pr_info(DRV_NAME
2383 ": %s: link status definitely down for "
2384 "interface %s, disabling it\n",
2385 bond->dev->name, slave->dev->name);
2387 if (bond->params.mode == BOND_MODE_8023AD)
2388 bond_3ad_handle_link_change(slave,
2389 BOND_LINK_DOWN);
2391 if (bond_is_lb(bond))
2392 bond_alb_handle_link_change(bond, slave,
2393 BOND_LINK_DOWN);
2395 if (slave == bond->curr_active_slave)
2396 goto do_failover;
2398 continue;
2400 default:
2401 pr_err(DRV_NAME
2402 ": %s: invalid new link %d on slave %s\n",
2403 bond->dev->name, slave->new_link,
2404 slave->dev->name);
2405 slave->new_link = BOND_LINK_NOCHANGE;
2407 continue;
2410 do_failover:
2411 ASSERT_RTNL();
2412 write_lock_bh(&bond->curr_slave_lock);
2413 bond_select_active_slave(bond);
2414 write_unlock_bh(&bond->curr_slave_lock);
2417 bond_set_carrier(bond);
2421 * bond_mii_monitor
2423 * Really a wrapper that splits the mii monitor into two phases: an
2424 * inspection, then (if inspection indicates something needs to be done)
2425 * an acquisition of appropriate locks followed by a commit phase to
2426 * implement whatever link state changes are indicated.
2428 void bond_mii_monitor(struct work_struct *work)
2430 struct bonding *bond = container_of(work, struct bonding,
2431 mii_work.work);
2433 read_lock(&bond->lock);
2434 if (bond->kill_timers)
2435 goto out;
2437 if (bond->slave_cnt == 0)
2438 goto re_arm;
2440 if (bond->send_grat_arp) {
2441 read_lock(&bond->curr_slave_lock);
2442 bond_send_gratuitous_arp(bond);
2443 read_unlock(&bond->curr_slave_lock);
2446 if (bond->send_unsol_na) {
2447 read_lock(&bond->curr_slave_lock);
2448 bond_send_unsolicited_na(bond);
2449 read_unlock(&bond->curr_slave_lock);
2452 if (bond_miimon_inspect(bond)) {
2453 read_unlock(&bond->lock);
2454 rtnl_lock();
2455 read_lock(&bond->lock);
2457 bond_miimon_commit(bond);
2459 read_unlock(&bond->lock);
2460 rtnl_unlock(); /* might sleep, hold no other locks */
2461 read_lock(&bond->lock);
2464 re_arm:
2465 if (bond->params.miimon)
2466 queue_delayed_work(bond->wq, &bond->mii_work,
2467 msecs_to_jiffies(bond->params.miimon));
2468 out:
2469 read_unlock(&bond->lock);
2472 static __be32 bond_glean_dev_ip(struct net_device *dev)
2474 struct in_device *idev;
2475 struct in_ifaddr *ifa;
2476 __be32 addr = 0;
2478 if (!dev)
2479 return 0;
2481 rcu_read_lock();
2482 idev = __in_dev_get_rcu(dev);
2483 if (!idev)
2484 goto out;
2486 ifa = idev->ifa_list;
2487 if (!ifa)
2488 goto out;
2490 addr = ifa->ifa_local;
2491 out:
2492 rcu_read_unlock();
2493 return addr;
2496 static int bond_has_this_ip(struct bonding *bond, __be32 ip)
2498 struct vlan_entry *vlan;
2500 if (ip == bond->master_ip)
2501 return 1;
2503 list_for_each_entry(vlan, &bond->vlan_list, vlan_list) {
2504 if (ip == vlan->vlan_ip)
2505 return 1;
2508 return 0;
2512 * We go to the (large) trouble of VLAN tagging ARP frames because
2513 * switches in VLAN mode (especially if ports are configured as
2514 * "native" to a VLAN) might not pass non-tagged frames.
2516 static void bond_arp_send(struct net_device *slave_dev, int arp_op, __be32 dest_ip, __be32 src_ip, unsigned short vlan_id)
2518 struct sk_buff *skb;
2520 pr_debug("arp %d on slave %s: dst %x src %x vid %d\n", arp_op,
2521 slave_dev->name, dest_ip, src_ip, vlan_id);
2523 skb = arp_create(arp_op, ETH_P_ARP, dest_ip, slave_dev, src_ip,
2524 NULL, slave_dev->dev_addr, NULL);
2526 if (!skb) {
2527 pr_err(DRV_NAME ": ARP packet allocation failed\n");
2528 return;
2530 if (vlan_id) {
2531 skb = vlan_put_tag(skb, vlan_id);
2532 if (!skb) {
2533 pr_err(DRV_NAME ": failed to insert VLAN tag\n");
2534 return;
2537 arp_xmit(skb);
2541 static void bond_arp_send_all(struct bonding *bond, struct slave *slave)
2543 int i, vlan_id, rv;
2544 __be32 *targets = bond->params.arp_targets;
2545 struct vlan_entry *vlan;
2546 struct net_device *vlan_dev;
2547 struct flowi fl;
2548 struct rtable *rt;
2550 for (i = 0; (i < BOND_MAX_ARP_TARGETS); i++) {
2551 if (!targets[i])
2552 break;
2553 pr_debug("basa: target %x\n", targets[i]);
2554 if (list_empty(&bond->vlan_list)) {
2555 pr_debug("basa: empty vlan: arp_send\n");
2556 bond_arp_send(slave->dev, ARPOP_REQUEST, targets[i],
2557 bond->master_ip, 0);
2558 continue;
2562 * If VLANs are configured, we do a route lookup to
2563 * determine which VLAN interface would be used, so we
2564 * can tag the ARP with the proper VLAN tag.
2566 memset(&fl, 0, sizeof(fl));
2567 fl.fl4_dst = targets[i];
2568 fl.fl4_tos = RTO_ONLINK;
2570 rv = ip_route_output_key(&init_net, &rt, &fl);
2571 if (rv) {
2572 if (net_ratelimit()) {
2573 pr_warning(DRV_NAME
2574 ": %s: no route to arp_ip_target %pI4\n",
2575 bond->dev->name, &fl.fl4_dst);
2577 continue;
2581 * This target is not on a VLAN
2583 if (rt->u.dst.dev == bond->dev) {
2584 ip_rt_put(rt);
2585 pr_debug("basa: rtdev == bond->dev: arp_send\n");
2586 bond_arp_send(slave->dev, ARPOP_REQUEST, targets[i],
2587 bond->master_ip, 0);
2588 continue;
2591 vlan_id = 0;
2592 list_for_each_entry(vlan, &bond->vlan_list, vlan_list) {
2593 vlan_dev = vlan_group_get_device(bond->vlgrp, vlan->vlan_id);
2594 if (vlan_dev == rt->u.dst.dev) {
2595 vlan_id = vlan->vlan_id;
2596 pr_debug("basa: vlan match on %s %d\n",
2597 vlan_dev->name, vlan_id);
2598 break;
2602 if (vlan_id) {
2603 ip_rt_put(rt);
2604 bond_arp_send(slave->dev, ARPOP_REQUEST, targets[i],
2605 vlan->vlan_ip, vlan_id);
2606 continue;
2609 if (net_ratelimit()) {
2610 pr_warning(DRV_NAME
2611 ": %s: no path to arp_ip_target %pI4 via rt.dev %s\n",
2612 bond->dev->name, &fl.fl4_dst,
2613 rt->u.dst.dev ? rt->u.dst.dev->name : "NULL");
2615 ip_rt_put(rt);
2620 * Kick out a gratuitous ARP for an IP on the bonding master plus one
2621 * for each VLAN above us.
2623 * Caller must hold curr_slave_lock for read or better
2625 static void bond_send_gratuitous_arp(struct bonding *bond)
2627 struct slave *slave = bond->curr_active_slave;
2628 struct vlan_entry *vlan;
2629 struct net_device *vlan_dev;
2631 pr_debug("bond_send_grat_arp: bond %s slave %s\n", bond->dev->name,
2632 slave ? slave->dev->name : "NULL");
2634 if (!slave || !bond->send_grat_arp ||
2635 test_bit(__LINK_STATE_LINKWATCH_PENDING, &slave->dev->state))
2636 return;
2638 bond->send_grat_arp--;
2640 if (bond->master_ip) {
2641 bond_arp_send(slave->dev, ARPOP_REPLY, bond->master_ip,
2642 bond->master_ip, 0);
2645 list_for_each_entry(vlan, &bond->vlan_list, vlan_list) {
2646 vlan_dev = vlan_group_get_device(bond->vlgrp, vlan->vlan_id);
2647 if (vlan->vlan_ip) {
2648 bond_arp_send(slave->dev, ARPOP_REPLY, vlan->vlan_ip,
2649 vlan->vlan_ip, vlan->vlan_id);
2654 static void bond_validate_arp(struct bonding *bond, struct slave *slave, __be32 sip, __be32 tip)
2656 int i;
2657 __be32 *targets = bond->params.arp_targets;
2659 for (i = 0; (i < BOND_MAX_ARP_TARGETS) && targets[i]; i++) {
2660 pr_debug("bva: sip %pI4 tip %pI4 t[%d] %pI4 bhti(tip) %d\n",
2661 &sip, &tip, i, &targets[i], bond_has_this_ip(bond, tip));
2662 if (sip == targets[i]) {
2663 if (bond_has_this_ip(bond, tip))
2664 slave->last_arp_rx = jiffies;
2665 return;
2670 static int bond_arp_rcv(struct sk_buff *skb, struct net_device *dev, struct packet_type *pt, struct net_device *orig_dev)
2672 struct arphdr *arp;
2673 struct slave *slave;
2674 struct bonding *bond;
2675 unsigned char *arp_ptr;
2676 __be32 sip, tip;
2678 if (dev_net(dev) != &init_net)
2679 goto out;
2681 if (!(dev->priv_flags & IFF_BONDING) || !(dev->flags & IFF_MASTER))
2682 goto out;
2684 bond = netdev_priv(dev);
2685 read_lock(&bond->lock);
2687 pr_debug("bond_arp_rcv: bond %s skb->dev %s orig_dev %s\n",
2688 bond->dev->name, skb->dev ? skb->dev->name : "NULL",
2689 orig_dev ? orig_dev->name : "NULL");
2691 slave = bond_get_slave_by_dev(bond, orig_dev);
2692 if (!slave || !slave_do_arp_validate(bond, slave))
2693 goto out_unlock;
2695 if (!pskb_may_pull(skb, arp_hdr_len(dev)))
2696 goto out_unlock;
2698 arp = arp_hdr(skb);
2699 if (arp->ar_hln != dev->addr_len ||
2700 skb->pkt_type == PACKET_OTHERHOST ||
2701 skb->pkt_type == PACKET_LOOPBACK ||
2702 arp->ar_hrd != htons(ARPHRD_ETHER) ||
2703 arp->ar_pro != htons(ETH_P_IP) ||
2704 arp->ar_pln != 4)
2705 goto out_unlock;
2707 arp_ptr = (unsigned char *)(arp + 1);
2708 arp_ptr += dev->addr_len;
2709 memcpy(&sip, arp_ptr, 4);
2710 arp_ptr += 4 + dev->addr_len;
2711 memcpy(&tip, arp_ptr, 4);
2713 pr_debug("bond_arp_rcv: %s %s/%d av %d sv %d sip %pI4 tip %pI4\n",
2714 bond->dev->name, slave->dev->name, slave->state,
2715 bond->params.arp_validate, slave_do_arp_validate(bond, slave),
2716 &sip, &tip);
2719 * Backup slaves won't see the ARP reply, but do come through
2720 * here for each ARP probe (so we swap the sip/tip to validate
2721 * the probe). In a "redundant switch, common router" type of
2722 * configuration, the ARP probe will (hopefully) travel from
2723 * the active, through one switch, the router, then the other
2724 * switch before reaching the backup.
2726 if (slave->state == BOND_STATE_ACTIVE)
2727 bond_validate_arp(bond, slave, sip, tip);
2728 else
2729 bond_validate_arp(bond, slave, tip, sip);
2731 out_unlock:
2732 read_unlock(&bond->lock);
2733 out:
2734 dev_kfree_skb(skb);
2735 return NET_RX_SUCCESS;
2739 * this function is called regularly to monitor each slave's link
2740 * ensuring that traffic is being sent and received when arp monitoring
2741 * is used in load-balancing mode. if the adapter has been dormant, then an
2742 * arp is transmitted to generate traffic. see activebackup_arp_monitor for
2743 * arp monitoring in active backup mode.
2745 void bond_loadbalance_arp_mon(struct work_struct *work)
2747 struct bonding *bond = container_of(work, struct bonding,
2748 arp_work.work);
2749 struct slave *slave, *oldcurrent;
2750 int do_failover = 0;
2751 int delta_in_ticks;
2752 int i;
2754 read_lock(&bond->lock);
2756 delta_in_ticks = msecs_to_jiffies(bond->params.arp_interval);
2758 if (bond->kill_timers)
2759 goto out;
2761 if (bond->slave_cnt == 0)
2762 goto re_arm;
2764 read_lock(&bond->curr_slave_lock);
2765 oldcurrent = bond->curr_active_slave;
2766 read_unlock(&bond->curr_slave_lock);
2768 /* see if any of the previous devices are up now (i.e. they have
2769 * xmt and rcv traffic). the curr_active_slave does not come into
2770 * the picture unless it is null. also, slave->jiffies is not needed
2771 * here because we send an arp on each slave and give a slave as
2772 * long as it needs to get the tx/rx within the delta.
2773 * TODO: what about up/down delay in arp mode? it wasn't here before
2774 * so it can wait
2776 bond_for_each_slave(bond, slave, i) {
2777 if (slave->link != BOND_LINK_UP) {
2778 if (time_before_eq(jiffies, dev_trans_start(slave->dev) + delta_in_ticks) &&
2779 time_before_eq(jiffies, slave->dev->last_rx + delta_in_ticks)) {
2781 slave->link = BOND_LINK_UP;
2782 slave->state = BOND_STATE_ACTIVE;
2784 /* primary_slave has no meaning in round-robin
2785 * mode. the window of a slave being up and
2786 * curr_active_slave being null after enslaving
2787 * is closed.
2789 if (!oldcurrent) {
2790 pr_info(DRV_NAME
2791 ": %s: link status definitely "
2792 "up for interface %s, ",
2793 bond->dev->name,
2794 slave->dev->name);
2795 do_failover = 1;
2796 } else {
2797 pr_info(DRV_NAME
2798 ": %s: interface %s is now up\n",
2799 bond->dev->name,
2800 slave->dev->name);
2803 } else {
2804 /* slave->link == BOND_LINK_UP */
2806 /* not all switches will respond to an arp request
2807 * when the source ip is 0, so don't take the link down
2808 * if we don't know our ip yet
2810 if (time_after_eq(jiffies, dev_trans_start(slave->dev) + 2*delta_in_ticks) ||
2811 (time_after_eq(jiffies, slave->dev->last_rx + 2*delta_in_ticks))) {
2813 slave->link = BOND_LINK_DOWN;
2814 slave->state = BOND_STATE_BACKUP;
2816 if (slave->link_failure_count < UINT_MAX)
2817 slave->link_failure_count++;
2819 pr_info(DRV_NAME
2820 ": %s: interface %s is now down.\n",
2821 bond->dev->name,
2822 slave->dev->name);
2824 if (slave == oldcurrent)
2825 do_failover = 1;
2829 /* note: if switch is in round-robin mode, all links
2830 * must tx arp to ensure all links rx an arp - otherwise
2831 * links may oscillate or not come up at all; if switch is
2832 * in something like xor mode, there is nothing we can
2833 * do - all replies will be rx'ed on same link causing slaves
2834 * to be unstable during low/no traffic periods
2836 if (IS_UP(slave->dev))
2837 bond_arp_send_all(bond, slave);
2840 if (do_failover) {
2841 write_lock_bh(&bond->curr_slave_lock);
2843 bond_select_active_slave(bond);
2845 write_unlock_bh(&bond->curr_slave_lock);
2848 re_arm:
2849 if (bond->params.arp_interval)
2850 queue_delayed_work(bond->wq, &bond->arp_work, delta_in_ticks);
2851 out:
2852 read_unlock(&bond->lock);
2856 * Called to inspect slaves for active-backup mode ARP monitor link state
2857 * changes. Sets new_link in slaves to specify what action should take
2858 * place for the slave. Returns 0 if no changes are found, >0 if changes
2859 * to link states must be committed.
2861 * Called with bond->lock held for read.
2863 static int bond_ab_arp_inspect(struct bonding *bond, int delta_in_ticks)
2865 struct slave *slave;
2866 int i, commit = 0;
2868 bond_for_each_slave(bond, slave, i) {
2869 slave->new_link = BOND_LINK_NOCHANGE;
2871 if (slave->link != BOND_LINK_UP) {
2872 if (time_before_eq(jiffies, slave_last_rx(bond, slave) +
2873 delta_in_ticks)) {
2874 slave->new_link = BOND_LINK_UP;
2875 commit++;
2878 continue;
2882 * Give slaves 2*delta after being enslaved or made
2883 * active. This avoids bouncing, as the last receive
2884 * times need a full ARP monitor cycle to be updated.
2886 if (!time_after_eq(jiffies, slave->jiffies +
2887 2 * delta_in_ticks))
2888 continue;
2891 * Backup slave is down if:
2892 * - No current_arp_slave AND
2893 * - more than 3*delta since last receive AND
2894 * - the bond has an IP address
2896 * Note: a non-null current_arp_slave indicates
2897 * the curr_active_slave went down and we are
2898 * searching for a new one; under this condition
2899 * we only take the curr_active_slave down - this
2900 * gives each slave a chance to tx/rx traffic
2901 * before being taken out
2903 if (slave->state == BOND_STATE_BACKUP &&
2904 !bond->current_arp_slave &&
2905 time_after(jiffies, slave_last_rx(bond, slave) +
2906 3 * delta_in_ticks)) {
2907 slave->new_link = BOND_LINK_DOWN;
2908 commit++;
2912 * Active slave is down if:
2913 * - more than 2*delta since transmitting OR
2914 * - (more than 2*delta since receive AND
2915 * the bond has an IP address)
2917 if ((slave->state == BOND_STATE_ACTIVE) &&
2918 (time_after_eq(jiffies, dev_trans_start(slave->dev) +
2919 2 * delta_in_ticks) ||
2920 (time_after_eq(jiffies, slave_last_rx(bond, slave)
2921 + 2 * delta_in_ticks)))) {
2922 slave->new_link = BOND_LINK_DOWN;
2923 commit++;
2927 return commit;
2931 * Called to commit link state changes noted by inspection step of
2932 * active-backup mode ARP monitor.
2934 * Called with RTNL and bond->lock for read.
2936 static void bond_ab_arp_commit(struct bonding *bond, int delta_in_ticks)
2938 struct slave *slave;
2939 int i;
2941 bond_for_each_slave(bond, slave, i) {
2942 switch (slave->new_link) {
2943 case BOND_LINK_NOCHANGE:
2944 continue;
2946 case BOND_LINK_UP:
2947 if ((!bond->curr_active_slave &&
2948 time_before_eq(jiffies,
2949 dev_trans_start(slave->dev) +
2950 delta_in_ticks)) ||
2951 bond->curr_active_slave != slave) {
2952 slave->link = BOND_LINK_UP;
2953 bond->current_arp_slave = NULL;
2955 pr_info(DRV_NAME
2956 ": %s: link status definitely "
2957 "up for interface %s.\n",
2958 bond->dev->name, slave->dev->name);
2960 if (!bond->curr_active_slave ||
2961 (slave == bond->primary_slave))
2962 goto do_failover;
2966 continue;
2968 case BOND_LINK_DOWN:
2969 if (slave->link_failure_count < UINT_MAX)
2970 slave->link_failure_count++;
2972 slave->link = BOND_LINK_DOWN;
2973 bond_set_slave_inactive_flags(slave);
2975 pr_info(DRV_NAME
2976 ": %s: link status definitely down for "
2977 "interface %s, disabling it\n",
2978 bond->dev->name, slave->dev->name);
2980 if (slave == bond->curr_active_slave) {
2981 bond->current_arp_slave = NULL;
2982 goto do_failover;
2985 continue;
2987 default:
2988 pr_err(DRV_NAME
2989 ": %s: impossible: new_link %d on slave %s\n",
2990 bond->dev->name, slave->new_link,
2991 slave->dev->name);
2992 continue;
2995 do_failover:
2996 ASSERT_RTNL();
2997 write_lock_bh(&bond->curr_slave_lock);
2998 bond_select_active_slave(bond);
2999 write_unlock_bh(&bond->curr_slave_lock);
3002 bond_set_carrier(bond);
3006 * Send ARP probes for active-backup mode ARP monitor.
3008 * Called with bond->lock held for read.
3010 static void bond_ab_arp_probe(struct bonding *bond)
3012 struct slave *slave;
3013 int i;
3015 read_lock(&bond->curr_slave_lock);
3017 if (bond->current_arp_slave && bond->curr_active_slave)
3018 pr_info(DRV_NAME "PROBE: c_arp %s && cas %s BAD\n",
3019 bond->current_arp_slave->dev->name,
3020 bond->curr_active_slave->dev->name);
3022 if (bond->curr_active_slave) {
3023 bond_arp_send_all(bond, bond->curr_active_slave);
3024 read_unlock(&bond->curr_slave_lock);
3025 return;
3028 read_unlock(&bond->curr_slave_lock);
3030 /* if we don't have a curr_active_slave, search for the next available
3031 * backup slave from the current_arp_slave and make it the candidate
3032 * for becoming the curr_active_slave
3035 if (!bond->current_arp_slave) {
3036 bond->current_arp_slave = bond->first_slave;
3037 if (!bond->current_arp_slave)
3038 return;
3041 bond_set_slave_inactive_flags(bond->current_arp_slave);
3043 /* search for next candidate */
3044 bond_for_each_slave_from(bond, slave, i, bond->current_arp_slave->next) {
3045 if (IS_UP(slave->dev)) {
3046 slave->link = BOND_LINK_BACK;
3047 bond_set_slave_active_flags(slave);
3048 bond_arp_send_all(bond, slave);
3049 slave->jiffies = jiffies;
3050 bond->current_arp_slave = slave;
3051 break;
3054 /* if the link state is up at this point, we
3055 * mark it down - this can happen if we have
3056 * simultaneous link failures and
3057 * reselect_active_interface doesn't make this
3058 * one the current slave so it is still marked
3059 * up when it is actually down
3061 if (slave->link == BOND_LINK_UP) {
3062 slave->link = BOND_LINK_DOWN;
3063 if (slave->link_failure_count < UINT_MAX)
3064 slave->link_failure_count++;
3066 bond_set_slave_inactive_flags(slave);
3068 pr_info(DRV_NAME
3069 ": %s: backup interface %s is now down.\n",
3070 bond->dev->name, slave->dev->name);
3075 void bond_activebackup_arp_mon(struct work_struct *work)
3077 struct bonding *bond = container_of(work, struct bonding,
3078 arp_work.work);
3079 int delta_in_ticks;
3081 read_lock(&bond->lock);
3083 if (bond->kill_timers)
3084 goto out;
3086 delta_in_ticks = msecs_to_jiffies(bond->params.arp_interval);
3088 if (bond->slave_cnt == 0)
3089 goto re_arm;
3091 if (bond->send_grat_arp) {
3092 read_lock(&bond->curr_slave_lock);
3093 bond_send_gratuitous_arp(bond);
3094 read_unlock(&bond->curr_slave_lock);
3097 if (bond->send_unsol_na) {
3098 read_lock(&bond->curr_slave_lock);
3099 bond_send_unsolicited_na(bond);
3100 read_unlock(&bond->curr_slave_lock);
3103 if (bond_ab_arp_inspect(bond, delta_in_ticks)) {
3104 read_unlock(&bond->lock);
3105 rtnl_lock();
3106 read_lock(&bond->lock);
3108 bond_ab_arp_commit(bond, delta_in_ticks);
3110 read_unlock(&bond->lock);
3111 rtnl_unlock();
3112 read_lock(&bond->lock);
3115 bond_ab_arp_probe(bond);
3117 re_arm:
3118 if (bond->params.arp_interval)
3119 queue_delayed_work(bond->wq, &bond->arp_work, delta_in_ticks);
3120 out:
3121 read_unlock(&bond->lock);
3124 /*------------------------------ proc/seq_file-------------------------------*/
3126 #ifdef CONFIG_PROC_FS
3128 static void *bond_info_seq_start(struct seq_file *seq, loff_t *pos)
3129 __acquires(&dev_base_lock)
3130 __acquires(&bond->lock)
3132 struct bonding *bond = seq->private;
3133 loff_t off = 0;
3134 struct slave *slave;
3135 int i;
3137 /* make sure the bond won't be taken away */
3138 read_lock(&dev_base_lock);
3139 read_lock(&bond->lock);
3141 if (*pos == 0)
3142 return SEQ_START_TOKEN;
3144 bond_for_each_slave(bond, slave, i) {
3145 if (++off == *pos)
3146 return slave;
3149 return NULL;
3152 static void *bond_info_seq_next(struct seq_file *seq, void *v, loff_t *pos)
3154 struct bonding *bond = seq->private;
3155 struct slave *slave = v;
3157 ++*pos;
3158 if (v == SEQ_START_TOKEN)
3159 return bond->first_slave;
3161 slave = slave->next;
3163 return (slave == bond->first_slave) ? NULL : slave;
3166 static void bond_info_seq_stop(struct seq_file *seq, void *v)
3167 __releases(&bond->lock)
3168 __releases(&dev_base_lock)
3170 struct bonding *bond = seq->private;
3172 read_unlock(&bond->lock);
3173 read_unlock(&dev_base_lock);
3176 static void bond_info_show_master(struct seq_file *seq)
3178 struct bonding *bond = seq->private;
3179 struct slave *curr;
3180 int i;
3182 read_lock(&bond->curr_slave_lock);
3183 curr = bond->curr_active_slave;
3184 read_unlock(&bond->curr_slave_lock);
3186 seq_printf(seq, "Bonding Mode: %s",
3187 bond_mode_name(bond->params.mode));
3189 if (bond->params.mode == BOND_MODE_ACTIVEBACKUP &&
3190 bond->params.fail_over_mac)
3191 seq_printf(seq, " (fail_over_mac %s)",
3192 fail_over_mac_tbl[bond->params.fail_over_mac].modename);
3194 seq_printf(seq, "\n");
3196 if (bond->params.mode == BOND_MODE_XOR ||
3197 bond->params.mode == BOND_MODE_8023AD) {
3198 seq_printf(seq, "Transmit Hash Policy: %s (%d)\n",
3199 xmit_hashtype_tbl[bond->params.xmit_policy].modename,
3200 bond->params.xmit_policy);
3203 if (USES_PRIMARY(bond->params.mode)) {
3204 seq_printf(seq, "Primary Slave: %s\n",
3205 (bond->primary_slave) ?
3206 bond->primary_slave->dev->name : "None");
3208 seq_printf(seq, "Currently Active Slave: %s\n",
3209 (curr) ? curr->dev->name : "None");
3212 seq_printf(seq, "MII Status: %s\n", netif_carrier_ok(bond->dev) ?
3213 "up" : "down");
3214 seq_printf(seq, "MII Polling Interval (ms): %d\n", bond->params.miimon);
3215 seq_printf(seq, "Up Delay (ms): %d\n",
3216 bond->params.updelay * bond->params.miimon);
3217 seq_printf(seq, "Down Delay (ms): %d\n",
3218 bond->params.downdelay * bond->params.miimon);
3221 /* ARP information */
3222 if (bond->params.arp_interval > 0) {
3223 int printed = 0;
3224 seq_printf(seq, "ARP Polling Interval (ms): %d\n",
3225 bond->params.arp_interval);
3227 seq_printf(seq, "ARP IP target/s (n.n.n.n form):");
3229 for (i = 0; (i < BOND_MAX_ARP_TARGETS); i++) {
3230 if (!bond->params.arp_targets[i])
3231 break;
3232 if (printed)
3233 seq_printf(seq, ",");
3234 seq_printf(seq, " %pI4", &bond->params.arp_targets[i]);
3235 printed = 1;
3237 seq_printf(seq, "\n");
3240 if (bond->params.mode == BOND_MODE_8023AD) {
3241 struct ad_info ad_info;
3243 seq_puts(seq, "\n802.3ad info\n");
3244 seq_printf(seq, "LACP rate: %s\n",
3245 (bond->params.lacp_fast) ? "fast" : "slow");
3246 seq_printf(seq, "Aggregator selection policy (ad_select): %s\n",
3247 ad_select_tbl[bond->params.ad_select].modename);
3249 if (bond_3ad_get_active_agg_info(bond, &ad_info)) {
3250 seq_printf(seq, "bond %s has no active aggregator\n",
3251 bond->dev->name);
3252 } else {
3253 seq_printf(seq, "Active Aggregator Info:\n");
3255 seq_printf(seq, "\tAggregator ID: %d\n",
3256 ad_info.aggregator_id);
3257 seq_printf(seq, "\tNumber of ports: %d\n",
3258 ad_info.ports);
3259 seq_printf(seq, "\tActor Key: %d\n",
3260 ad_info.actor_key);
3261 seq_printf(seq, "\tPartner Key: %d\n",
3262 ad_info.partner_key);
3263 seq_printf(seq, "\tPartner Mac Address: %pM\n",
3264 ad_info.partner_system);
3269 static void bond_info_show_slave(struct seq_file *seq,
3270 const struct slave *slave)
3272 struct bonding *bond = seq->private;
3274 seq_printf(seq, "\nSlave Interface: %s\n", slave->dev->name);
3275 seq_printf(seq, "MII Status: %s\n",
3276 (slave->link == BOND_LINK_UP) ? "up" : "down");
3277 seq_printf(seq, "Link Failure Count: %u\n",
3278 slave->link_failure_count);
3280 seq_printf(seq, "Permanent HW addr: %pM\n", slave->perm_hwaddr);
3282 if (bond->params.mode == BOND_MODE_8023AD) {
3283 const struct aggregator *agg
3284 = SLAVE_AD_INFO(slave).port.aggregator;
3286 if (agg)
3287 seq_printf(seq, "Aggregator ID: %d\n",
3288 agg->aggregator_identifier);
3289 else
3290 seq_puts(seq, "Aggregator ID: N/A\n");
3294 static int bond_info_seq_show(struct seq_file *seq, void *v)
3296 if (v == SEQ_START_TOKEN) {
3297 seq_printf(seq, "%s\n", version);
3298 bond_info_show_master(seq);
3299 } else
3300 bond_info_show_slave(seq, v);
3302 return 0;
3305 static const struct seq_operations bond_info_seq_ops = {
3306 .start = bond_info_seq_start,
3307 .next = bond_info_seq_next,
3308 .stop = bond_info_seq_stop,
3309 .show = bond_info_seq_show,
3312 static int bond_info_open(struct inode *inode, struct file *file)
3314 struct seq_file *seq;
3315 struct proc_dir_entry *proc;
3316 int res;
3318 res = seq_open(file, &bond_info_seq_ops);
3319 if (!res) {
3320 /* recover the pointer buried in proc_dir_entry data */
3321 seq = file->private_data;
3322 proc = PDE(inode);
3323 seq->private = proc->data;
3326 return res;
3329 static const struct file_operations bond_info_fops = {
3330 .owner = THIS_MODULE,
3331 .open = bond_info_open,
3332 .read = seq_read,
3333 .llseek = seq_lseek,
3334 .release = seq_release,
3337 static int bond_create_proc_entry(struct bonding *bond)
3339 struct net_device *bond_dev = bond->dev;
3341 if (bond_proc_dir) {
3342 bond->proc_entry = proc_create_data(bond_dev->name,
3343 S_IRUGO, bond_proc_dir,
3344 &bond_info_fops, bond);
3345 if (bond->proc_entry == NULL)
3346 pr_warning(DRV_NAME
3347 ": Warning: Cannot create /proc/net/%s/%s\n",
3348 DRV_NAME, bond_dev->name);
3349 else
3350 memcpy(bond->proc_file_name, bond_dev->name, IFNAMSIZ);
3353 return 0;
3356 static void bond_remove_proc_entry(struct bonding *bond)
3358 if (bond_proc_dir && bond->proc_entry) {
3359 remove_proc_entry(bond->proc_file_name, bond_proc_dir);
3360 memset(bond->proc_file_name, 0, IFNAMSIZ);
3361 bond->proc_entry = NULL;
3365 /* Create the bonding directory under /proc/net, if doesn't exist yet.
3366 * Caller must hold rtnl_lock.
3368 static void bond_create_proc_dir(void)
3370 if (!bond_proc_dir) {
3371 bond_proc_dir = proc_mkdir(DRV_NAME, init_net.proc_net);
3372 if (!bond_proc_dir)
3373 pr_warning(DRV_NAME
3374 ": Warning: cannot create /proc/net/%s\n",
3375 DRV_NAME);
3379 /* Destroy the bonding directory under /proc/net, if empty.
3380 * Caller must hold rtnl_lock.
3382 static void bond_destroy_proc_dir(void)
3384 if (bond_proc_dir) {
3385 remove_proc_entry(DRV_NAME, init_net.proc_net);
3386 bond_proc_dir = NULL;
3390 #else /* !CONFIG_PROC_FS */
3392 static int bond_create_proc_entry(struct bonding *bond)
3396 static void bond_remove_proc_entry(struct bonding *bond)
3400 static void bond_create_proc_dir(void)
3404 static void bond_destroy_proc_dir(void)
3408 #endif /* CONFIG_PROC_FS */
3411 /*-------------------------- netdev event handling --------------------------*/
3414 * Change device name
3416 static int bond_event_changename(struct bonding *bond)
3418 bond_remove_proc_entry(bond);
3419 bond_create_proc_entry(bond);
3421 bond_destroy_sysfs_entry(bond);
3422 bond_create_sysfs_entry(bond);
3424 return NOTIFY_DONE;
3427 static int bond_master_netdev_event(unsigned long event,
3428 struct net_device *bond_dev)
3430 struct bonding *event_bond = netdev_priv(bond_dev);
3432 switch (event) {
3433 case NETDEV_CHANGENAME:
3434 return bond_event_changename(event_bond);
3435 case NETDEV_UNREGISTER:
3436 bond_release_all(event_bond->dev);
3437 break;
3438 default:
3439 break;
3442 return NOTIFY_DONE;
3445 static int bond_slave_netdev_event(unsigned long event,
3446 struct net_device *slave_dev)
3448 struct net_device *bond_dev = slave_dev->master;
3449 struct bonding *bond = netdev_priv(bond_dev);
3451 switch (event) {
3452 case NETDEV_UNREGISTER:
3453 if (bond_dev) {
3454 if (bond->setup_by_slave)
3455 bond_release_and_destroy(bond_dev, slave_dev);
3456 else
3457 bond_release(bond_dev, slave_dev);
3459 break;
3460 case NETDEV_CHANGE:
3461 if (bond->params.mode == BOND_MODE_8023AD || bond_is_lb(bond)) {
3462 struct slave *slave;
3464 slave = bond_get_slave_by_dev(bond, slave_dev);
3465 if (slave) {
3466 u16 old_speed = slave->speed;
3467 u16 old_duplex = slave->duplex;
3469 bond_update_speed_duplex(slave);
3471 if (bond_is_lb(bond))
3472 break;
3474 if (old_speed != slave->speed)
3475 bond_3ad_adapter_speed_changed(slave);
3476 if (old_duplex != slave->duplex)
3477 bond_3ad_adapter_duplex_changed(slave);
3481 break;
3482 case NETDEV_DOWN:
3484 * ... Or is it this?
3486 break;
3487 case NETDEV_CHANGEMTU:
3489 * TODO: Should slaves be allowed to
3490 * independently alter their MTU? For
3491 * an active-backup bond, slaves need
3492 * not be the same type of device, so
3493 * MTUs may vary. For other modes,
3494 * slaves arguably should have the
3495 * same MTUs. To do this, we'd need to
3496 * take over the slave's change_mtu
3497 * function for the duration of their
3498 * servitude.
3500 break;
3501 case NETDEV_CHANGENAME:
3503 * TODO: handle changing the primary's name
3505 break;
3506 case NETDEV_FEAT_CHANGE:
3507 bond_compute_features(bond);
3508 break;
3509 default:
3510 break;
3513 return NOTIFY_DONE;
3517 * bond_netdev_event: handle netdev notifier chain events.
3519 * This function receives events for the netdev chain. The caller (an
3520 * ioctl handler calling blocking_notifier_call_chain) holds the necessary
3521 * locks for us to safely manipulate the slave devices (RTNL lock,
3522 * dev_probe_lock).
3524 static int bond_netdev_event(struct notifier_block *this,
3525 unsigned long event, void *ptr)
3527 struct net_device *event_dev = (struct net_device *)ptr;
3529 if (dev_net(event_dev) != &init_net)
3530 return NOTIFY_DONE;
3532 pr_debug("event_dev: %s, event: %lx\n",
3533 (event_dev ? event_dev->name : "None"),
3534 event);
3536 if (!(event_dev->priv_flags & IFF_BONDING))
3537 return NOTIFY_DONE;
3539 if (event_dev->flags & IFF_MASTER) {
3540 pr_debug("IFF_MASTER\n");
3541 return bond_master_netdev_event(event, event_dev);
3544 if (event_dev->flags & IFF_SLAVE) {
3545 pr_debug("IFF_SLAVE\n");
3546 return bond_slave_netdev_event(event, event_dev);
3549 return NOTIFY_DONE;
3553 * bond_inetaddr_event: handle inetaddr notifier chain events.
3555 * We keep track of device IPs primarily to use as source addresses in
3556 * ARP monitor probes (rather than spewing out broadcasts all the time).
3558 * We track one IP for the main device (if it has one), plus one per VLAN.
3560 static int bond_inetaddr_event(struct notifier_block *this, unsigned long event, void *ptr)
3562 struct in_ifaddr *ifa = ptr;
3563 struct net_device *vlan_dev, *event_dev = ifa->ifa_dev->dev;
3564 struct bonding *bond;
3565 struct vlan_entry *vlan;
3567 if (dev_net(ifa->ifa_dev->dev) != &init_net)
3568 return NOTIFY_DONE;
3570 list_for_each_entry(bond, &bond_dev_list, bond_list) {
3571 if (bond->dev == event_dev) {
3572 switch (event) {
3573 case NETDEV_UP:
3574 bond->master_ip = ifa->ifa_local;
3575 return NOTIFY_OK;
3576 case NETDEV_DOWN:
3577 bond->master_ip = bond_glean_dev_ip(bond->dev);
3578 return NOTIFY_OK;
3579 default:
3580 return NOTIFY_DONE;
3584 list_for_each_entry(vlan, &bond->vlan_list, vlan_list) {
3585 vlan_dev = vlan_group_get_device(bond->vlgrp, vlan->vlan_id);
3586 if (vlan_dev == event_dev) {
3587 switch (event) {
3588 case NETDEV_UP:
3589 vlan->vlan_ip = ifa->ifa_local;
3590 return NOTIFY_OK;
3591 case NETDEV_DOWN:
3592 vlan->vlan_ip =
3593 bond_glean_dev_ip(vlan_dev);
3594 return NOTIFY_OK;
3595 default:
3596 return NOTIFY_DONE;
3601 return NOTIFY_DONE;
3604 static struct notifier_block bond_netdev_notifier = {
3605 .notifier_call = bond_netdev_event,
3608 static struct notifier_block bond_inetaddr_notifier = {
3609 .notifier_call = bond_inetaddr_event,
3612 /*-------------------------- Packet type handling ---------------------------*/
3614 /* register to receive lacpdus on a bond */
3615 static void bond_register_lacpdu(struct bonding *bond)
3617 struct packet_type *pk_type = &(BOND_AD_INFO(bond).ad_pkt_type);
3619 /* initialize packet type */
3620 pk_type->type = PKT_TYPE_LACPDU;
3621 pk_type->dev = bond->dev;
3622 pk_type->func = bond_3ad_lacpdu_recv;
3624 dev_add_pack(pk_type);
3627 /* unregister to receive lacpdus on a bond */
3628 static void bond_unregister_lacpdu(struct bonding *bond)
3630 dev_remove_pack(&(BOND_AD_INFO(bond).ad_pkt_type));
3633 void bond_register_arp(struct bonding *bond)
3635 struct packet_type *pt = &bond->arp_mon_pt;
3637 if (pt->type)
3638 return;
3640 pt->type = htons(ETH_P_ARP);
3641 pt->dev = bond->dev;
3642 pt->func = bond_arp_rcv;
3643 dev_add_pack(pt);
3646 void bond_unregister_arp(struct bonding *bond)
3648 struct packet_type *pt = &bond->arp_mon_pt;
3650 dev_remove_pack(pt);
3651 pt->type = 0;
3654 /*---------------------------- Hashing Policies -----------------------------*/
3657 * Hash for the output device based upon layer 2 and layer 3 data. If
3658 * the packet is not IP mimic bond_xmit_hash_policy_l2()
3660 static int bond_xmit_hash_policy_l23(struct sk_buff *skb,
3661 struct net_device *bond_dev, int count)
3663 struct ethhdr *data = (struct ethhdr *)skb->data;
3664 struct iphdr *iph = ip_hdr(skb);
3666 if (skb->protocol == htons(ETH_P_IP)) {
3667 return ((ntohl(iph->saddr ^ iph->daddr) & 0xffff) ^
3668 (data->h_dest[5] ^ bond_dev->dev_addr[5])) % count;
3671 return (data->h_dest[5] ^ bond_dev->dev_addr[5]) % count;
3675 * Hash for the output device based upon layer 3 and layer 4 data. If
3676 * the packet is a frag or not TCP or UDP, just use layer 3 data. If it is
3677 * altogether not IP, mimic bond_xmit_hash_policy_l2()
3679 static int bond_xmit_hash_policy_l34(struct sk_buff *skb,
3680 struct net_device *bond_dev, int count)
3682 struct ethhdr *data = (struct ethhdr *)skb->data;
3683 struct iphdr *iph = ip_hdr(skb);
3684 __be16 *layer4hdr = (__be16 *)((u32 *)iph + iph->ihl);
3685 int layer4_xor = 0;
3687 if (skb->protocol == htons(ETH_P_IP)) {
3688 if (!(iph->frag_off & htons(IP_MF|IP_OFFSET)) &&
3689 (iph->protocol == IPPROTO_TCP ||
3690 iph->protocol == IPPROTO_UDP)) {
3691 layer4_xor = ntohs((*layer4hdr ^ *(layer4hdr + 1)));
3693 return (layer4_xor ^
3694 ((ntohl(iph->saddr ^ iph->daddr)) & 0xffff)) % count;
3698 return (data->h_dest[5] ^ bond_dev->dev_addr[5]) % count;
3702 * Hash for the output device based upon layer 2 data
3704 static int bond_xmit_hash_policy_l2(struct sk_buff *skb,
3705 struct net_device *bond_dev, int count)
3707 struct ethhdr *data = (struct ethhdr *)skb->data;
3709 return (data->h_dest[5] ^ bond_dev->dev_addr[5]) % count;
3712 /*-------------------------- Device entry points ----------------------------*/
3714 static int bond_open(struct net_device *bond_dev)
3716 struct bonding *bond = netdev_priv(bond_dev);
3718 bond->kill_timers = 0;
3720 if (bond_is_lb(bond)) {
3721 /* bond_alb_initialize must be called before the timer
3722 * is started.
3724 if (bond_alb_initialize(bond, (bond->params.mode == BOND_MODE_ALB))) {
3725 /* something went wrong - fail the open operation */
3726 return -1;
3729 INIT_DELAYED_WORK(&bond->alb_work, bond_alb_monitor);
3730 queue_delayed_work(bond->wq, &bond->alb_work, 0);
3733 if (bond->params.miimon) { /* link check interval, in milliseconds. */
3734 INIT_DELAYED_WORK(&bond->mii_work, bond_mii_monitor);
3735 queue_delayed_work(bond->wq, &bond->mii_work, 0);
3738 if (bond->params.arp_interval) { /* arp interval, in milliseconds. */
3739 if (bond->params.mode == BOND_MODE_ACTIVEBACKUP)
3740 INIT_DELAYED_WORK(&bond->arp_work,
3741 bond_activebackup_arp_mon);
3742 else
3743 INIT_DELAYED_WORK(&bond->arp_work,
3744 bond_loadbalance_arp_mon);
3746 queue_delayed_work(bond->wq, &bond->arp_work, 0);
3747 if (bond->params.arp_validate)
3748 bond_register_arp(bond);
3751 if (bond->params.mode == BOND_MODE_8023AD) {
3752 INIT_DELAYED_WORK(&bond->ad_work, bond_3ad_state_machine_handler);
3753 queue_delayed_work(bond->wq, &bond->ad_work, 0);
3754 /* register to receive LACPDUs */
3755 bond_register_lacpdu(bond);
3756 bond_3ad_initiate_agg_selection(bond, 1);
3759 return 0;
3762 static int bond_close(struct net_device *bond_dev)
3764 struct bonding *bond = netdev_priv(bond_dev);
3766 if (bond->params.mode == BOND_MODE_8023AD) {
3767 /* Unregister the receive of LACPDUs */
3768 bond_unregister_lacpdu(bond);
3771 if (bond->params.arp_validate)
3772 bond_unregister_arp(bond);
3774 write_lock_bh(&bond->lock);
3776 bond->send_grat_arp = 0;
3777 bond->send_unsol_na = 0;
3779 /* signal timers not to re-arm */
3780 bond->kill_timers = 1;
3782 write_unlock_bh(&bond->lock);
3784 if (bond->params.miimon) { /* link check interval, in milliseconds. */
3785 cancel_delayed_work(&bond->mii_work);
3788 if (bond->params.arp_interval) { /* arp interval, in milliseconds. */
3789 cancel_delayed_work(&bond->arp_work);
3792 switch (bond->params.mode) {
3793 case BOND_MODE_8023AD:
3794 cancel_delayed_work(&bond->ad_work);
3795 break;
3796 case BOND_MODE_TLB:
3797 case BOND_MODE_ALB:
3798 cancel_delayed_work(&bond->alb_work);
3799 break;
3800 default:
3801 break;
3805 if (bond_is_lb(bond)) {
3806 /* Must be called only after all
3807 * slaves have been released
3809 bond_alb_deinitialize(bond);
3812 return 0;
3815 static struct net_device_stats *bond_get_stats(struct net_device *bond_dev)
3817 struct bonding *bond = netdev_priv(bond_dev);
3818 struct net_device_stats *stats = &bond->stats;
3819 struct net_device_stats local_stats;
3820 struct slave *slave;
3821 int i;
3823 memset(&local_stats, 0, sizeof(struct net_device_stats));
3825 read_lock_bh(&bond->lock);
3827 bond_for_each_slave(bond, slave, i) {
3828 const struct net_device_stats *sstats = dev_get_stats(slave->dev);
3830 local_stats.rx_packets += sstats->rx_packets;
3831 local_stats.rx_bytes += sstats->rx_bytes;
3832 local_stats.rx_errors += sstats->rx_errors;
3833 local_stats.rx_dropped += sstats->rx_dropped;
3835 local_stats.tx_packets += sstats->tx_packets;
3836 local_stats.tx_bytes += sstats->tx_bytes;
3837 local_stats.tx_errors += sstats->tx_errors;
3838 local_stats.tx_dropped += sstats->tx_dropped;
3840 local_stats.multicast += sstats->multicast;
3841 local_stats.collisions += sstats->collisions;
3843 local_stats.rx_length_errors += sstats->rx_length_errors;
3844 local_stats.rx_over_errors += sstats->rx_over_errors;
3845 local_stats.rx_crc_errors += sstats->rx_crc_errors;
3846 local_stats.rx_frame_errors += sstats->rx_frame_errors;
3847 local_stats.rx_fifo_errors += sstats->rx_fifo_errors;
3848 local_stats.rx_missed_errors += sstats->rx_missed_errors;
3850 local_stats.tx_aborted_errors += sstats->tx_aborted_errors;
3851 local_stats.tx_carrier_errors += sstats->tx_carrier_errors;
3852 local_stats.tx_fifo_errors += sstats->tx_fifo_errors;
3853 local_stats.tx_heartbeat_errors += sstats->tx_heartbeat_errors;
3854 local_stats.tx_window_errors += sstats->tx_window_errors;
3857 memcpy(stats, &local_stats, sizeof(struct net_device_stats));
3859 read_unlock_bh(&bond->lock);
3861 return stats;
3864 static int bond_do_ioctl(struct net_device *bond_dev, struct ifreq *ifr, int cmd)
3866 struct net_device *slave_dev = NULL;
3867 struct ifbond k_binfo;
3868 struct ifbond __user *u_binfo = NULL;
3869 struct ifslave k_sinfo;
3870 struct ifslave __user *u_sinfo = NULL;
3871 struct mii_ioctl_data *mii = NULL;
3872 int res = 0;
3874 pr_debug("bond_ioctl: master=%s, cmd=%d\n",
3875 bond_dev->name, cmd);
3877 switch (cmd) {
3878 case SIOCGMIIPHY:
3879 mii = if_mii(ifr);
3880 if (!mii)
3881 return -EINVAL;
3883 mii->phy_id = 0;
3884 /* Fall Through */
3885 case SIOCGMIIREG:
3887 * We do this again just in case we were called by SIOCGMIIREG
3888 * instead of SIOCGMIIPHY.
3890 mii = if_mii(ifr);
3891 if (!mii)
3892 return -EINVAL;
3895 if (mii->reg_num == 1) {
3896 struct bonding *bond = netdev_priv(bond_dev);
3897 mii->val_out = 0;
3898 read_lock(&bond->lock);
3899 read_lock(&bond->curr_slave_lock);
3900 if (netif_carrier_ok(bond->dev))
3901 mii->val_out = BMSR_LSTATUS;
3903 read_unlock(&bond->curr_slave_lock);
3904 read_unlock(&bond->lock);
3907 return 0;
3908 case BOND_INFO_QUERY_OLD:
3909 case SIOCBONDINFOQUERY:
3910 u_binfo = (struct ifbond __user *)ifr->ifr_data;
3912 if (copy_from_user(&k_binfo, u_binfo, sizeof(ifbond)))
3913 return -EFAULT;
3915 res = bond_info_query(bond_dev, &k_binfo);
3916 if (res == 0 &&
3917 copy_to_user(u_binfo, &k_binfo, sizeof(ifbond)))
3918 return -EFAULT;
3920 return res;
3921 case BOND_SLAVE_INFO_QUERY_OLD:
3922 case SIOCBONDSLAVEINFOQUERY:
3923 u_sinfo = (struct ifslave __user *)ifr->ifr_data;
3925 if (copy_from_user(&k_sinfo, u_sinfo, sizeof(ifslave)))
3926 return -EFAULT;
3928 res = bond_slave_info_query(bond_dev, &k_sinfo);
3929 if (res == 0 &&
3930 copy_to_user(u_sinfo, &k_sinfo, sizeof(ifslave)))
3931 return -EFAULT;
3933 return res;
3934 default:
3935 /* Go on */
3936 break;
3939 if (!capable(CAP_NET_ADMIN))
3940 return -EPERM;
3942 slave_dev = dev_get_by_name(&init_net, ifr->ifr_slave);
3944 pr_debug("slave_dev=%p: \n", slave_dev);
3946 if (!slave_dev)
3947 res = -ENODEV;
3948 else {
3949 pr_debug("slave_dev->name=%s: \n", slave_dev->name);
3950 switch (cmd) {
3951 case BOND_ENSLAVE_OLD:
3952 case SIOCBONDENSLAVE:
3953 res = bond_enslave(bond_dev, slave_dev);
3954 break;
3955 case BOND_RELEASE_OLD:
3956 case SIOCBONDRELEASE:
3957 res = bond_release(bond_dev, slave_dev);
3958 break;
3959 case BOND_SETHWADDR_OLD:
3960 case SIOCBONDSETHWADDR:
3961 res = bond_sethwaddr(bond_dev, slave_dev);
3962 break;
3963 case BOND_CHANGE_ACTIVE_OLD:
3964 case SIOCBONDCHANGEACTIVE:
3965 res = bond_ioctl_change_active(bond_dev, slave_dev);
3966 break;
3967 default:
3968 res = -EOPNOTSUPP;
3971 dev_put(slave_dev);
3974 return res;
3977 static void bond_set_multicast_list(struct net_device *bond_dev)
3979 struct bonding *bond = netdev_priv(bond_dev);
3980 struct dev_mc_list *dmi;
3983 * Do promisc before checking multicast_mode
3985 if ((bond_dev->flags & IFF_PROMISC) && !(bond->flags & IFF_PROMISC))
3987 * FIXME: Need to handle the error when one of the multi-slaves
3988 * encounters error.
3990 bond_set_promiscuity(bond, 1);
3993 if (!(bond_dev->flags & IFF_PROMISC) && (bond->flags & IFF_PROMISC))
3994 bond_set_promiscuity(bond, -1);
3997 /* set allmulti flag to slaves */
3998 if ((bond_dev->flags & IFF_ALLMULTI) && !(bond->flags & IFF_ALLMULTI))
4000 * FIXME: Need to handle the error when one of the multi-slaves
4001 * encounters error.
4003 bond_set_allmulti(bond, 1);
4006 if (!(bond_dev->flags & IFF_ALLMULTI) && (bond->flags & IFF_ALLMULTI))
4007 bond_set_allmulti(bond, -1);
4010 read_lock(&bond->lock);
4012 bond->flags = bond_dev->flags;
4014 /* looking for addresses to add to slaves' mc list */
4015 for (dmi = bond_dev->mc_list; dmi; dmi = dmi->next) {
4016 if (!bond_mc_list_find_dmi(dmi, bond->mc_list))
4017 bond_mc_add(bond, dmi->dmi_addr, dmi->dmi_addrlen);
4020 /* looking for addresses to delete from slaves' list */
4021 for (dmi = bond->mc_list; dmi; dmi = dmi->next) {
4022 if (!bond_mc_list_find_dmi(dmi, bond_dev->mc_list))
4023 bond_mc_delete(bond, dmi->dmi_addr, dmi->dmi_addrlen);
4026 /* save master's multicast list */
4027 bond_mc_list_destroy(bond);
4028 bond_mc_list_copy(bond_dev->mc_list, bond, GFP_ATOMIC);
4030 read_unlock(&bond->lock);
4033 static int bond_neigh_setup(struct net_device *dev, struct neigh_parms *parms)
4035 struct bonding *bond = netdev_priv(dev);
4036 struct slave *slave = bond->first_slave;
4038 if (slave) {
4039 const struct net_device_ops *slave_ops
4040 = slave->dev->netdev_ops;
4041 if (slave_ops->ndo_neigh_setup)
4042 return slave_ops->ndo_neigh_setup(slave->dev, parms);
4044 return 0;
4048 * Change the MTU of all of a master's slaves to match the master
4050 static int bond_change_mtu(struct net_device *bond_dev, int new_mtu)
4052 struct bonding *bond = netdev_priv(bond_dev);
4053 struct slave *slave, *stop_at;
4054 int res = 0;
4055 int i;
4057 pr_debug("bond=%p, name=%s, new_mtu=%d\n", bond,
4058 (bond_dev ? bond_dev->name : "None"), new_mtu);
4060 /* Can't hold bond->lock with bh disabled here since
4061 * some base drivers panic. On the other hand we can't
4062 * hold bond->lock without bh disabled because we'll
4063 * deadlock. The only solution is to rely on the fact
4064 * that we're under rtnl_lock here, and the slaves
4065 * list won't change. This doesn't solve the problem
4066 * of setting the slave's MTU while it is
4067 * transmitting, but the assumption is that the base
4068 * driver can handle that.
4070 * TODO: figure out a way to safely iterate the slaves
4071 * list, but without holding a lock around the actual
4072 * call to the base driver.
4075 bond_for_each_slave(bond, slave, i) {
4076 pr_debug("s %p s->p %p c_m %p\n", slave,
4077 slave->prev, slave->dev->netdev_ops->ndo_change_mtu);
4079 res = dev_set_mtu(slave->dev, new_mtu);
4081 if (res) {
4082 /* If we failed to set the slave's mtu to the new value
4083 * we must abort the operation even in ACTIVE_BACKUP
4084 * mode, because if we allow the backup slaves to have
4085 * different mtu values than the active slave we'll
4086 * need to change their mtu when doing a failover. That
4087 * means changing their mtu from timer context, which
4088 * is probably not a good idea.
4090 pr_debug("err %d %s\n", res, slave->dev->name);
4091 goto unwind;
4095 bond_dev->mtu = new_mtu;
4097 return 0;
4099 unwind:
4100 /* unwind from head to the slave that failed */
4101 stop_at = slave;
4102 bond_for_each_slave_from_to(bond, slave, i, bond->first_slave, stop_at) {
4103 int tmp_res;
4105 tmp_res = dev_set_mtu(slave->dev, bond_dev->mtu);
4106 if (tmp_res) {
4107 pr_debug("unwind err %d dev %s\n", tmp_res,
4108 slave->dev->name);
4112 return res;
4116 * Change HW address
4118 * Note that many devices must be down to change the HW address, and
4119 * downing the master releases all slaves. We can make bonds full of
4120 * bonding devices to test this, however.
4122 static int bond_set_mac_address(struct net_device *bond_dev, void *addr)
4124 struct bonding *bond = netdev_priv(bond_dev);
4125 struct sockaddr *sa = addr, tmp_sa;
4126 struct slave *slave, *stop_at;
4127 int res = 0;
4128 int i;
4130 if (bond->params.mode == BOND_MODE_ALB)
4131 return bond_alb_set_mac_address(bond_dev, addr);
4134 pr_debug("bond=%p, name=%s\n", bond, (bond_dev ? bond_dev->name : "None"));
4137 * If fail_over_mac is set to active, do nothing and return
4138 * success. Returning an error causes ifenslave to fail.
4140 if (bond->params.fail_over_mac == BOND_FOM_ACTIVE)
4141 return 0;
4143 if (!is_valid_ether_addr(sa->sa_data))
4144 return -EADDRNOTAVAIL;
4146 /* Can't hold bond->lock with bh disabled here since
4147 * some base drivers panic. On the other hand we can't
4148 * hold bond->lock without bh disabled because we'll
4149 * deadlock. The only solution is to rely on the fact
4150 * that we're under rtnl_lock here, and the slaves
4151 * list won't change. This doesn't solve the problem
4152 * of setting the slave's hw address while it is
4153 * transmitting, but the assumption is that the base
4154 * driver can handle that.
4156 * TODO: figure out a way to safely iterate the slaves
4157 * list, but without holding a lock around the actual
4158 * call to the base driver.
4161 bond_for_each_slave(bond, slave, i) {
4162 const struct net_device_ops *slave_ops = slave->dev->netdev_ops;
4163 pr_debug("slave %p %s\n", slave, slave->dev->name);
4165 if (slave_ops->ndo_set_mac_address == NULL) {
4166 res = -EOPNOTSUPP;
4167 pr_debug("EOPNOTSUPP %s\n", slave->dev->name);
4168 goto unwind;
4171 res = dev_set_mac_address(slave->dev, addr);
4172 if (res) {
4173 /* TODO: consider downing the slave
4174 * and retry ?
4175 * User should expect communications
4176 * breakage anyway until ARP finish
4177 * updating, so...
4179 pr_debug("err %d %s\n", res, slave->dev->name);
4180 goto unwind;
4184 /* success */
4185 memcpy(bond_dev->dev_addr, sa->sa_data, bond_dev->addr_len);
4186 return 0;
4188 unwind:
4189 memcpy(tmp_sa.sa_data, bond_dev->dev_addr, bond_dev->addr_len);
4190 tmp_sa.sa_family = bond_dev->type;
4192 /* unwind from head to the slave that failed */
4193 stop_at = slave;
4194 bond_for_each_slave_from_to(bond, slave, i, bond->first_slave, stop_at) {
4195 int tmp_res;
4197 tmp_res = dev_set_mac_address(slave->dev, &tmp_sa);
4198 if (tmp_res) {
4199 pr_debug("unwind err %d dev %s\n", tmp_res,
4200 slave->dev->name);
4204 return res;
4207 static int bond_xmit_roundrobin(struct sk_buff *skb, struct net_device *bond_dev)
4209 struct bonding *bond = netdev_priv(bond_dev);
4210 struct slave *slave, *start_at;
4211 int i, slave_no, res = 1;
4213 read_lock(&bond->lock);
4215 if (!BOND_IS_OK(bond))
4216 goto out;
4219 * Concurrent TX may collide on rr_tx_counter; we accept that
4220 * as being rare enough not to justify using an atomic op here
4222 slave_no = bond->rr_tx_counter++ % bond->slave_cnt;
4224 bond_for_each_slave(bond, slave, i) {
4225 slave_no--;
4226 if (slave_no < 0)
4227 break;
4230 start_at = slave;
4231 bond_for_each_slave_from(bond, slave, i, start_at) {
4232 if (IS_UP(slave->dev) &&
4233 (slave->link == BOND_LINK_UP) &&
4234 (slave->state == BOND_STATE_ACTIVE)) {
4235 res = bond_dev_queue_xmit(bond, skb, slave->dev);
4236 break;
4240 out:
4241 if (res) {
4242 /* no suitable interface, frame not sent */
4243 dev_kfree_skb(skb);
4245 read_unlock(&bond->lock);
4246 return NETDEV_TX_OK;
4251 * in active-backup mode, we know that bond->curr_active_slave is always valid if
4252 * the bond has a usable interface.
4254 static int bond_xmit_activebackup(struct sk_buff *skb, struct net_device *bond_dev)
4256 struct bonding *bond = netdev_priv(bond_dev);
4257 int res = 1;
4259 read_lock(&bond->lock);
4260 read_lock(&bond->curr_slave_lock);
4262 if (!BOND_IS_OK(bond))
4263 goto out;
4265 if (!bond->curr_active_slave)
4266 goto out;
4268 res = bond_dev_queue_xmit(bond, skb, bond->curr_active_slave->dev);
4270 out:
4271 if (res)
4272 /* no suitable interface, frame not sent */
4273 dev_kfree_skb(skb);
4275 read_unlock(&bond->curr_slave_lock);
4276 read_unlock(&bond->lock);
4277 return NETDEV_TX_OK;
4281 * In bond_xmit_xor() , we determine the output device by using a pre-
4282 * determined xmit_hash_policy(), If the selected device is not enabled,
4283 * find the next active slave.
4285 static int bond_xmit_xor(struct sk_buff *skb, struct net_device *bond_dev)
4287 struct bonding *bond = netdev_priv(bond_dev);
4288 struct slave *slave, *start_at;
4289 int slave_no;
4290 int i;
4291 int res = 1;
4293 read_lock(&bond->lock);
4295 if (!BOND_IS_OK(bond))
4296 goto out;
4298 slave_no = bond->xmit_hash_policy(skb, bond_dev, bond->slave_cnt);
4300 bond_for_each_slave(bond, slave, i) {
4301 slave_no--;
4302 if (slave_no < 0)
4303 break;
4306 start_at = slave;
4308 bond_for_each_slave_from(bond, slave, i, start_at) {
4309 if (IS_UP(slave->dev) &&
4310 (slave->link == BOND_LINK_UP) &&
4311 (slave->state == BOND_STATE_ACTIVE)) {
4312 res = bond_dev_queue_xmit(bond, skb, slave->dev);
4313 break;
4317 out:
4318 if (res) {
4319 /* no suitable interface, frame not sent */
4320 dev_kfree_skb(skb);
4322 read_unlock(&bond->lock);
4323 return NETDEV_TX_OK;
4327 * in broadcast mode, we send everything to all usable interfaces.
4329 static int bond_xmit_broadcast(struct sk_buff *skb, struct net_device *bond_dev)
4331 struct bonding *bond = netdev_priv(bond_dev);
4332 struct slave *slave, *start_at;
4333 struct net_device *tx_dev = NULL;
4334 int i;
4335 int res = 1;
4337 read_lock(&bond->lock);
4339 if (!BOND_IS_OK(bond))
4340 goto out;
4342 read_lock(&bond->curr_slave_lock);
4343 start_at = bond->curr_active_slave;
4344 read_unlock(&bond->curr_slave_lock);
4346 if (!start_at)
4347 goto out;
4349 bond_for_each_slave_from(bond, slave, i, start_at) {
4350 if (IS_UP(slave->dev) &&
4351 (slave->link == BOND_LINK_UP) &&
4352 (slave->state == BOND_STATE_ACTIVE)) {
4353 if (tx_dev) {
4354 struct sk_buff *skb2 = skb_clone(skb, GFP_ATOMIC);
4355 if (!skb2) {
4356 pr_err(DRV_NAME
4357 ": %s: Error: bond_xmit_broadcast(): "
4358 "skb_clone() failed\n",
4359 bond_dev->name);
4360 continue;
4363 res = bond_dev_queue_xmit(bond, skb2, tx_dev);
4364 if (res) {
4365 dev_kfree_skb(skb2);
4366 continue;
4369 tx_dev = slave->dev;
4373 if (tx_dev)
4374 res = bond_dev_queue_xmit(bond, skb, tx_dev);
4376 out:
4377 if (res)
4378 /* no suitable interface, frame not sent */
4379 dev_kfree_skb(skb);
4381 /* frame sent to all suitable interfaces */
4382 read_unlock(&bond->lock);
4383 return NETDEV_TX_OK;
4386 /*------------------------- Device initialization ---------------------------*/
4388 static void bond_set_xmit_hash_policy(struct bonding *bond)
4390 switch (bond->params.xmit_policy) {
4391 case BOND_XMIT_POLICY_LAYER23:
4392 bond->xmit_hash_policy = bond_xmit_hash_policy_l23;
4393 break;
4394 case BOND_XMIT_POLICY_LAYER34:
4395 bond->xmit_hash_policy = bond_xmit_hash_policy_l34;
4396 break;
4397 case BOND_XMIT_POLICY_LAYER2:
4398 default:
4399 bond->xmit_hash_policy = bond_xmit_hash_policy_l2;
4400 break;
4404 static netdev_tx_t bond_start_xmit(struct sk_buff *skb, struct net_device *dev)
4406 const struct bonding *bond = netdev_priv(dev);
4408 switch (bond->params.mode) {
4409 case BOND_MODE_ROUNDROBIN:
4410 return bond_xmit_roundrobin(skb, dev);
4411 case BOND_MODE_ACTIVEBACKUP:
4412 return bond_xmit_activebackup(skb, dev);
4413 case BOND_MODE_XOR:
4414 return bond_xmit_xor(skb, dev);
4415 case BOND_MODE_BROADCAST:
4416 return bond_xmit_broadcast(skb, dev);
4417 case BOND_MODE_8023AD:
4418 return bond_3ad_xmit_xor(skb, dev);
4419 case BOND_MODE_ALB:
4420 case BOND_MODE_TLB:
4421 return bond_alb_xmit(skb, dev);
4422 default:
4423 /* Should never happen, mode already checked */
4424 pr_err(DRV_NAME ": %s: Error: Unknown bonding mode %d\n",
4425 dev->name, bond->params.mode);
4426 WARN_ON_ONCE(1);
4427 dev_kfree_skb(skb);
4428 return NETDEV_TX_OK;
4434 * set bond mode specific net device operations
4436 void bond_set_mode_ops(struct bonding *bond, int mode)
4438 struct net_device *bond_dev = bond->dev;
4440 switch (mode) {
4441 case BOND_MODE_ROUNDROBIN:
4442 break;
4443 case BOND_MODE_ACTIVEBACKUP:
4444 break;
4445 case BOND_MODE_XOR:
4446 bond_set_xmit_hash_policy(bond);
4447 break;
4448 case BOND_MODE_BROADCAST:
4449 break;
4450 case BOND_MODE_8023AD:
4451 bond_set_master_3ad_flags(bond);
4452 bond_set_xmit_hash_policy(bond);
4453 break;
4454 case BOND_MODE_ALB:
4455 bond_set_master_alb_flags(bond);
4456 /* FALLTHRU */
4457 case BOND_MODE_TLB:
4458 break;
4459 default:
4460 /* Should never happen, mode already checked */
4461 pr_err(DRV_NAME
4462 ": %s: Error: Unknown bonding mode %d\n",
4463 bond_dev->name,
4464 mode);
4465 break;
4469 static void bond_ethtool_get_drvinfo(struct net_device *bond_dev,
4470 struct ethtool_drvinfo *drvinfo)
4472 strncpy(drvinfo->driver, DRV_NAME, 32);
4473 strncpy(drvinfo->version, DRV_VERSION, 32);
4474 snprintf(drvinfo->fw_version, 32, "%d", BOND_ABI_VERSION);
4477 static const struct ethtool_ops bond_ethtool_ops = {
4478 .get_drvinfo = bond_ethtool_get_drvinfo,
4479 .get_link = ethtool_op_get_link,
4480 .get_tx_csum = ethtool_op_get_tx_csum,
4481 .get_sg = ethtool_op_get_sg,
4482 .get_tso = ethtool_op_get_tso,
4483 .get_ufo = ethtool_op_get_ufo,
4484 .get_flags = ethtool_op_get_flags,
4487 static const struct net_device_ops bond_netdev_ops = {
4488 .ndo_init = bond_init,
4489 .ndo_uninit = bond_uninit,
4490 .ndo_open = bond_open,
4491 .ndo_stop = bond_close,
4492 .ndo_start_xmit = bond_start_xmit,
4493 .ndo_get_stats = bond_get_stats,
4494 .ndo_do_ioctl = bond_do_ioctl,
4495 .ndo_set_multicast_list = bond_set_multicast_list,
4496 .ndo_change_mtu = bond_change_mtu,
4497 .ndo_set_mac_address = bond_set_mac_address,
4498 .ndo_neigh_setup = bond_neigh_setup,
4499 .ndo_vlan_rx_register = bond_vlan_rx_register,
4500 .ndo_vlan_rx_add_vid = bond_vlan_rx_add_vid,
4501 .ndo_vlan_rx_kill_vid = bond_vlan_rx_kill_vid,
4504 static void bond_setup(struct net_device *bond_dev)
4506 struct bonding *bond = netdev_priv(bond_dev);
4508 /* initialize rwlocks */
4509 rwlock_init(&bond->lock);
4510 rwlock_init(&bond->curr_slave_lock);
4512 bond->params = bonding_defaults;
4514 /* Initialize pointers */
4515 bond->dev = bond_dev;
4516 INIT_LIST_HEAD(&bond->vlan_list);
4518 /* Initialize the device entry points */
4519 ether_setup(bond_dev);
4520 bond_dev->netdev_ops = &bond_netdev_ops;
4521 bond_dev->ethtool_ops = &bond_ethtool_ops;
4522 bond_set_mode_ops(bond, bond->params.mode);
4524 bond_dev->destructor = free_netdev;
4526 /* Initialize the device options */
4527 bond_dev->tx_queue_len = 0;
4528 bond_dev->flags |= IFF_MASTER|IFF_MULTICAST;
4529 bond_dev->priv_flags |= IFF_BONDING;
4530 bond_dev->priv_flags &= ~IFF_XMIT_DST_RELEASE;
4532 if (bond->params.arp_interval)
4533 bond_dev->priv_flags |= IFF_MASTER_ARPMON;
4535 /* At first, we block adding VLANs. That's the only way to
4536 * prevent problems that occur when adding VLANs over an
4537 * empty bond. The block will be removed once non-challenged
4538 * slaves are enslaved.
4540 bond_dev->features |= NETIF_F_VLAN_CHALLENGED;
4542 /* don't acquire bond device's netif_tx_lock when
4543 * transmitting */
4544 bond_dev->features |= NETIF_F_LLTX;
4546 /* By default, we declare the bond to be fully
4547 * VLAN hardware accelerated capable. Special
4548 * care is taken in the various xmit functions
4549 * when there are slaves that are not hw accel
4550 * capable
4552 bond_dev->features |= (NETIF_F_HW_VLAN_TX |
4553 NETIF_F_HW_VLAN_RX |
4554 NETIF_F_HW_VLAN_FILTER);
4558 static void bond_work_cancel_all(struct bonding *bond)
4560 write_lock_bh(&bond->lock);
4561 bond->kill_timers = 1;
4562 write_unlock_bh(&bond->lock);
4564 if (bond->params.miimon && delayed_work_pending(&bond->mii_work))
4565 cancel_delayed_work(&bond->mii_work);
4567 if (bond->params.arp_interval && delayed_work_pending(&bond->arp_work))
4568 cancel_delayed_work(&bond->arp_work);
4570 if (bond->params.mode == BOND_MODE_ALB &&
4571 delayed_work_pending(&bond->alb_work))
4572 cancel_delayed_work(&bond->alb_work);
4574 if (bond->params.mode == BOND_MODE_8023AD &&
4575 delayed_work_pending(&bond->ad_work))
4576 cancel_delayed_work(&bond->ad_work);
4579 /* De-initialize device specific data.
4580 * Caller must hold rtnl_lock.
4582 static void bond_deinit(struct net_device *bond_dev)
4584 struct bonding *bond = netdev_priv(bond_dev);
4586 list_del(&bond->bond_list);
4588 bond_work_cancel_all(bond);
4590 bond_remove_proc_entry(bond);
4593 /* Unregister and free all bond devices.
4594 * Caller must hold rtnl_lock.
4596 static void bond_free_all(void)
4598 struct bonding *bond, *nxt;
4600 list_for_each_entry_safe(bond, nxt, &bond_dev_list, bond_list) {
4601 struct net_device *bond_dev = bond->dev;
4603 bond_work_cancel_all(bond);
4604 /* Release the bonded slaves */
4605 bond_release_all(bond_dev);
4606 unregister_netdevice(bond_dev);
4609 bond_destroy_proc_dir();
4612 /*------------------------- Module initialization ---------------------------*/
4615 * Convert string input module parms. Accept either the
4616 * number of the mode or its string name. A bit complicated because
4617 * some mode names are substrings of other names, and calls from sysfs
4618 * may have whitespace in the name (trailing newlines, for example).
4620 int bond_parse_parm(const char *buf, const struct bond_parm_tbl *tbl)
4622 int modeint = -1, i, rv;
4623 char *p, modestr[BOND_MAX_MODENAME_LEN + 1] = { 0, };
4625 for (p = (char *)buf; *p; p++)
4626 if (!(isdigit(*p) || isspace(*p)))
4627 break;
4629 if (*p)
4630 rv = sscanf(buf, "%20s", modestr);
4631 else
4632 rv = sscanf(buf, "%d", &modeint);
4634 if (!rv)
4635 return -1;
4637 for (i = 0; tbl[i].modename; i++) {
4638 if (modeint == tbl[i].mode)
4639 return tbl[i].mode;
4640 if (strcmp(modestr, tbl[i].modename) == 0)
4641 return tbl[i].mode;
4644 return -1;
4647 static int bond_check_params(struct bond_params *params)
4649 int arp_validate_value, fail_over_mac_value;
4652 * Convert string parameters.
4654 if (mode) {
4655 bond_mode = bond_parse_parm(mode, bond_mode_tbl);
4656 if (bond_mode == -1) {
4657 pr_err(DRV_NAME
4658 ": Error: Invalid bonding mode \"%s\"\n",
4659 mode == NULL ? "NULL" : mode);
4660 return -EINVAL;
4664 if (xmit_hash_policy) {
4665 if ((bond_mode != BOND_MODE_XOR) &&
4666 (bond_mode != BOND_MODE_8023AD)) {
4667 pr_info(DRV_NAME
4668 ": xor_mode param is irrelevant in mode %s\n",
4669 bond_mode_name(bond_mode));
4670 } else {
4671 xmit_hashtype = bond_parse_parm(xmit_hash_policy,
4672 xmit_hashtype_tbl);
4673 if (xmit_hashtype == -1) {
4674 pr_err(DRV_NAME
4675 ": Error: Invalid xmit_hash_policy \"%s\"\n",
4676 xmit_hash_policy == NULL ? "NULL" :
4677 xmit_hash_policy);
4678 return -EINVAL;
4683 if (lacp_rate) {
4684 if (bond_mode != BOND_MODE_8023AD) {
4685 pr_info(DRV_NAME
4686 ": lacp_rate param is irrelevant in mode %s\n",
4687 bond_mode_name(bond_mode));
4688 } else {
4689 lacp_fast = bond_parse_parm(lacp_rate, bond_lacp_tbl);
4690 if (lacp_fast == -1) {
4691 pr_err(DRV_NAME
4692 ": Error: Invalid lacp rate \"%s\"\n",
4693 lacp_rate == NULL ? "NULL" : lacp_rate);
4694 return -EINVAL;
4699 if (ad_select) {
4700 params->ad_select = bond_parse_parm(ad_select, ad_select_tbl);
4701 if (params->ad_select == -1) {
4702 pr_err(DRV_NAME
4703 ": Error: Invalid ad_select \"%s\"\n",
4704 ad_select == NULL ? "NULL" : ad_select);
4705 return -EINVAL;
4708 if (bond_mode != BOND_MODE_8023AD) {
4709 pr_warning(DRV_NAME
4710 ": ad_select param only affects 802.3ad mode\n");
4712 } else {
4713 params->ad_select = BOND_AD_STABLE;
4716 if (max_bonds < 0) {
4717 pr_warning(DRV_NAME
4718 ": Warning: max_bonds (%d) not in range %d-%d, so it "
4719 "was reset to BOND_DEFAULT_MAX_BONDS (%d)\n",
4720 max_bonds, 0, INT_MAX, BOND_DEFAULT_MAX_BONDS);
4721 max_bonds = BOND_DEFAULT_MAX_BONDS;
4724 if (miimon < 0) {
4725 pr_warning(DRV_NAME
4726 ": Warning: miimon module parameter (%d), "
4727 "not in range 0-%d, so it was reset to %d\n",
4728 miimon, INT_MAX, BOND_LINK_MON_INTERV);
4729 miimon = BOND_LINK_MON_INTERV;
4732 if (updelay < 0) {
4733 pr_warning(DRV_NAME
4734 ": Warning: updelay module parameter (%d), "
4735 "not in range 0-%d, so it was reset to 0\n",
4736 updelay, INT_MAX);
4737 updelay = 0;
4740 if (downdelay < 0) {
4741 pr_warning(DRV_NAME
4742 ": Warning: downdelay module parameter (%d), "
4743 "not in range 0-%d, so it was reset to 0\n",
4744 downdelay, INT_MAX);
4745 downdelay = 0;
4748 if ((use_carrier != 0) && (use_carrier != 1)) {
4749 pr_warning(DRV_NAME
4750 ": Warning: use_carrier module parameter (%d), "
4751 "not of valid value (0/1), so it was set to 1\n",
4752 use_carrier);
4753 use_carrier = 1;
4756 if (num_grat_arp < 0 || num_grat_arp > 255) {
4757 pr_warning(DRV_NAME
4758 ": Warning: num_grat_arp (%d) not in range 0-255 so it "
4759 "was reset to 1 \n", num_grat_arp);
4760 num_grat_arp = 1;
4763 if (num_unsol_na < 0 || num_unsol_na > 255) {
4764 pr_warning(DRV_NAME
4765 ": Warning: num_unsol_na (%d) not in range 0-255 so it "
4766 "was reset to 1 \n", num_unsol_na);
4767 num_unsol_na = 1;
4770 /* reset values for 802.3ad */
4771 if (bond_mode == BOND_MODE_8023AD) {
4772 if (!miimon) {
4773 pr_warning(DRV_NAME
4774 ": Warning: miimon must be specified, "
4775 "otherwise bonding will not detect link "
4776 "failure, speed and duplex which are "
4777 "essential for 802.3ad operation\n");
4778 pr_warning("Forcing miimon to 100msec\n");
4779 miimon = 100;
4783 /* reset values for TLB/ALB */
4784 if ((bond_mode == BOND_MODE_TLB) ||
4785 (bond_mode == BOND_MODE_ALB)) {
4786 if (!miimon) {
4787 pr_warning(DRV_NAME
4788 ": Warning: miimon must be specified, "
4789 "otherwise bonding will not detect link "
4790 "failure and link speed which are essential "
4791 "for TLB/ALB load balancing\n");
4792 pr_warning("Forcing miimon to 100msec\n");
4793 miimon = 100;
4797 if (bond_mode == BOND_MODE_ALB) {
4798 pr_notice(DRV_NAME
4799 ": In ALB mode you might experience client "
4800 "disconnections upon reconnection of a link if the "
4801 "bonding module updelay parameter (%d msec) is "
4802 "incompatible with the forwarding delay time of the "
4803 "switch\n",
4804 updelay);
4807 if (!miimon) {
4808 if (updelay || downdelay) {
4809 /* just warn the user the up/down delay will have
4810 * no effect since miimon is zero...
4812 pr_warning(DRV_NAME
4813 ": Warning: miimon module parameter not set "
4814 "and updelay (%d) or downdelay (%d) module "
4815 "parameter is set; updelay and downdelay have "
4816 "no effect unless miimon is set\n",
4817 updelay, downdelay);
4819 } else {
4820 /* don't allow arp monitoring */
4821 if (arp_interval) {
4822 pr_warning(DRV_NAME
4823 ": Warning: miimon (%d) and arp_interval (%d) "
4824 "can't be used simultaneously, disabling ARP "
4825 "monitoring\n",
4826 miimon, arp_interval);
4827 arp_interval = 0;
4830 if ((updelay % miimon) != 0) {
4831 pr_warning(DRV_NAME
4832 ": Warning: updelay (%d) is not a multiple "
4833 "of miimon (%d), updelay rounded to %d ms\n",
4834 updelay, miimon, (updelay / miimon) * miimon);
4837 updelay /= miimon;
4839 if ((downdelay % miimon) != 0) {
4840 pr_warning(DRV_NAME
4841 ": Warning: downdelay (%d) is not a multiple "
4842 "of miimon (%d), downdelay rounded to %d ms\n",
4843 downdelay, miimon,
4844 (downdelay / miimon) * miimon);
4847 downdelay /= miimon;
4850 if (arp_interval < 0) {
4851 pr_warning(DRV_NAME
4852 ": Warning: arp_interval module parameter (%d) "
4853 ", not in range 0-%d, so it was reset to %d\n",
4854 arp_interval, INT_MAX, BOND_LINK_ARP_INTERV);
4855 arp_interval = BOND_LINK_ARP_INTERV;
4858 for (arp_ip_count = 0;
4859 (arp_ip_count < BOND_MAX_ARP_TARGETS) && arp_ip_target[arp_ip_count];
4860 arp_ip_count++) {
4861 /* not complete check, but should be good enough to
4862 catch mistakes */
4863 if (!isdigit(arp_ip_target[arp_ip_count][0])) {
4864 pr_warning(DRV_NAME
4865 ": Warning: bad arp_ip_target module parameter "
4866 "(%s), ARP monitoring will not be performed\n",
4867 arp_ip_target[arp_ip_count]);
4868 arp_interval = 0;
4869 } else {
4870 __be32 ip = in_aton(arp_ip_target[arp_ip_count]);
4871 arp_target[arp_ip_count] = ip;
4875 if (arp_interval && !arp_ip_count) {
4876 /* don't allow arping if no arp_ip_target given... */
4877 pr_warning(DRV_NAME
4878 ": Warning: arp_interval module parameter (%d) "
4879 "specified without providing an arp_ip_target "
4880 "parameter, arp_interval was reset to 0\n",
4881 arp_interval);
4882 arp_interval = 0;
4885 if (arp_validate) {
4886 if (bond_mode != BOND_MODE_ACTIVEBACKUP) {
4887 pr_err(DRV_NAME
4888 ": arp_validate only supported in active-backup mode\n");
4889 return -EINVAL;
4891 if (!arp_interval) {
4892 pr_err(DRV_NAME
4893 ": arp_validate requires arp_interval\n");
4894 return -EINVAL;
4897 arp_validate_value = bond_parse_parm(arp_validate,
4898 arp_validate_tbl);
4899 if (arp_validate_value == -1) {
4900 pr_err(DRV_NAME
4901 ": Error: invalid arp_validate \"%s\"\n",
4902 arp_validate == NULL ? "NULL" : arp_validate);
4903 return -EINVAL;
4905 } else
4906 arp_validate_value = 0;
4908 if (miimon) {
4909 pr_info(DRV_NAME
4910 ": MII link monitoring set to %d ms\n",
4911 miimon);
4912 } else if (arp_interval) {
4913 int i;
4915 pr_info(DRV_NAME ": ARP monitoring set to %d ms,"
4916 " validate %s, with %d target(s):",
4917 arp_interval,
4918 arp_validate_tbl[arp_validate_value].modename,
4919 arp_ip_count);
4921 for (i = 0; i < arp_ip_count; i++)
4922 pr_info(" %s", arp_ip_target[i]);
4924 pr_info("\n");
4926 } else if (max_bonds) {
4927 /* miimon and arp_interval not set, we need one so things
4928 * work as expected, see bonding.txt for details
4930 pr_warning(DRV_NAME
4931 ": Warning: either miimon or arp_interval and "
4932 "arp_ip_target module parameters must be specified, "
4933 "otherwise bonding will not detect link failures! see "
4934 "bonding.txt for details.\n");
4937 if (primary && !USES_PRIMARY(bond_mode)) {
4938 /* currently, using a primary only makes sense
4939 * in active backup, TLB or ALB modes
4941 pr_warning(DRV_NAME
4942 ": Warning: %s primary device specified but has no "
4943 "effect in %s mode\n",
4944 primary, bond_mode_name(bond_mode));
4945 primary = NULL;
4948 if (fail_over_mac) {
4949 fail_over_mac_value = bond_parse_parm(fail_over_mac,
4950 fail_over_mac_tbl);
4951 if (fail_over_mac_value == -1) {
4952 pr_err(DRV_NAME
4953 ": Error: invalid fail_over_mac \"%s\"\n",
4954 arp_validate == NULL ? "NULL" : arp_validate);
4955 return -EINVAL;
4958 if (bond_mode != BOND_MODE_ACTIVEBACKUP)
4959 pr_warning(DRV_NAME
4960 ": Warning: fail_over_mac only affects "
4961 "active-backup mode.\n");
4962 } else {
4963 fail_over_mac_value = BOND_FOM_NONE;
4966 /* fill params struct with the proper values */
4967 params->mode = bond_mode;
4968 params->xmit_policy = xmit_hashtype;
4969 params->miimon = miimon;
4970 params->num_grat_arp = num_grat_arp;
4971 params->num_unsol_na = num_unsol_na;
4972 params->arp_interval = arp_interval;
4973 params->arp_validate = arp_validate_value;
4974 params->updelay = updelay;
4975 params->downdelay = downdelay;
4976 params->use_carrier = use_carrier;
4977 params->lacp_fast = lacp_fast;
4978 params->primary[0] = 0;
4979 params->fail_over_mac = fail_over_mac_value;
4981 if (primary) {
4982 strncpy(params->primary, primary, IFNAMSIZ);
4983 params->primary[IFNAMSIZ - 1] = 0;
4986 memcpy(params->arp_targets, arp_target, sizeof(arp_target));
4988 return 0;
4991 static struct lock_class_key bonding_netdev_xmit_lock_key;
4992 static struct lock_class_key bonding_netdev_addr_lock_key;
4994 static void bond_set_lockdep_class_one(struct net_device *dev,
4995 struct netdev_queue *txq,
4996 void *_unused)
4998 lockdep_set_class(&txq->_xmit_lock,
4999 &bonding_netdev_xmit_lock_key);
5002 static void bond_set_lockdep_class(struct net_device *dev)
5004 lockdep_set_class(&dev->addr_list_lock,
5005 &bonding_netdev_addr_lock_key);
5006 netdev_for_each_tx_queue(dev, bond_set_lockdep_class_one, NULL);
5010 * Called from registration process
5012 static int bond_init(struct net_device *bond_dev)
5014 struct bonding *bond = netdev_priv(bond_dev);
5016 pr_debug("Begin bond_init for %s\n", bond_dev->name);
5018 bond->wq = create_singlethread_workqueue(bond_dev->name);
5019 if (!bond->wq)
5020 return -ENOMEM;
5022 bond_set_lockdep_class(bond_dev);
5024 netif_carrier_off(bond_dev);
5026 bond_create_proc_entry(bond);
5027 list_add_tail(&bond->bond_list, &bond_dev_list);
5029 return 0;
5032 /* Create a new bond based on the specified name and bonding parameters.
5033 * If name is NULL, obtain a suitable "bond%d" name for us.
5034 * Caller must NOT hold rtnl_lock; we need to release it here before we
5035 * set up our sysfs entries.
5037 int bond_create(const char *name)
5039 struct net_device *bond_dev;
5040 int res;
5042 rtnl_lock();
5043 /* Check to see if the bond already exists. */
5044 /* FIXME: pass netns from caller */
5045 if (name && __dev_get_by_name(&init_net, name)) {
5046 pr_err(DRV_NAME ": cannot add bond %s; already exists\n",
5047 name);
5048 res = -EEXIST;
5049 goto out_rtnl;
5052 bond_dev = alloc_netdev(sizeof(struct bonding), name ? name : "",
5053 bond_setup);
5054 if (!bond_dev) {
5055 pr_err(DRV_NAME ": %s: eek! can't alloc netdev!\n",
5056 name);
5057 res = -ENOMEM;
5058 goto out_rtnl;
5061 if (!name) {
5062 res = dev_alloc_name(bond_dev, "bond%d");
5063 if (res < 0)
5064 goto out_netdev;
5067 res = register_netdevice(bond_dev);
5068 if (res < 0)
5069 goto out_bond;
5071 res = bond_create_sysfs_entry(netdev_priv(bond_dev));
5072 if (res < 0)
5073 goto out_unreg;
5075 rtnl_unlock();
5076 return 0;
5078 out_unreg:
5079 unregister_netdevice(bond_dev);
5080 out_bond:
5081 bond_deinit(bond_dev);
5082 out_netdev:
5083 free_netdev(bond_dev);
5084 out_rtnl:
5085 rtnl_unlock();
5086 return res;
5089 static int __init bonding_init(void)
5091 int i;
5092 int res;
5094 pr_info("%s", version);
5096 res = bond_check_params(&bonding_defaults);
5097 if (res)
5098 goto out;
5100 bond_create_proc_dir();
5102 for (i = 0; i < max_bonds; i++) {
5103 res = bond_create(NULL);
5104 if (res)
5105 goto err;
5108 res = bond_create_sysfs();
5109 if (res)
5110 goto err;
5112 register_netdevice_notifier(&bond_netdev_notifier);
5113 register_inetaddr_notifier(&bond_inetaddr_notifier);
5114 bond_register_ipv6_notifier();
5116 goto out;
5117 err:
5118 rtnl_lock();
5119 bond_free_all();
5120 rtnl_unlock();
5121 out:
5122 return res;
5126 static void __exit bonding_exit(void)
5128 unregister_netdevice_notifier(&bond_netdev_notifier);
5129 unregister_inetaddr_notifier(&bond_inetaddr_notifier);
5130 bond_unregister_ipv6_notifier();
5132 bond_destroy_sysfs();
5134 rtnl_lock();
5135 bond_free_all();
5136 rtnl_unlock();
5139 module_init(bonding_init);
5140 module_exit(bonding_exit);
5141 MODULE_LICENSE("GPL");
5142 MODULE_VERSION(DRV_VERSION);
5143 MODULE_DESCRIPTION(DRV_DESCRIPTION ", v" DRV_VERSION);
5144 MODULE_AUTHOR("Thomas Davis, tadavis@lbl.gov and many others");