Full support for Ginger Console
[linux-ginger.git] / drivers / net / pcmcia / smc91c92_cs.c
blob7bde2cd34c7e823882ba515ed88d7c6ed290a9cc
1 /*======================================================================
3 A PCMCIA ethernet driver for SMC91c92-based cards.
5 This driver supports Megahertz PCMCIA ethernet cards; and
6 Megahertz, Motorola, Ositech, and Psion Dacom ethernet/modem
7 multifunction cards.
9 Copyright (C) 1999 David A. Hinds -- dahinds@users.sourceforge.net
11 smc91c92_cs.c 1.122 2002/10/25 06:26:39
13 This driver contains code written by Donald Becker
14 (becker@scyld.com), Rowan Hughes (x-csrdh@jcu.edu.au),
15 David Hinds (dahinds@users.sourceforge.net), and Erik Stahlman
16 (erik@vt.edu). Donald wrote the SMC 91c92 code using parts of
17 Erik's SMC 91c94 driver. Rowan wrote a similar driver, and I've
18 incorporated some parts of his driver here. I (Dave) wrote most
19 of the PCMCIA glue code, and the Ositech support code. Kelly
20 Stephens (kstephen@holli.com) added support for the Motorola
21 Mariner, with help from Allen Brost.
23 This software may be used and distributed according to the terms of
24 the GNU General Public License, incorporated herein by reference.
26 ======================================================================*/
28 #include <linux/module.h>
29 #include <linux/kernel.h>
30 #include <linux/init.h>
31 #include <linux/slab.h>
32 #include <linux/string.h>
33 #include <linux/timer.h>
34 #include <linux/interrupt.h>
35 #include <linux/delay.h>
36 #include <linux/crc32.h>
37 #include <linux/netdevice.h>
38 #include <linux/etherdevice.h>
39 #include <linux/skbuff.h>
40 #include <linux/if_arp.h>
41 #include <linux/ioport.h>
42 #include <linux/ethtool.h>
43 #include <linux/mii.h>
44 #include <linux/jiffies.h>
45 #include <linux/firmware.h>
47 #include <pcmcia/cs_types.h>
48 #include <pcmcia/cs.h>
49 #include <pcmcia/cistpl.h>
50 #include <pcmcia/cisreg.h>
51 #include <pcmcia/ciscode.h>
52 #include <pcmcia/ds.h>
53 #include <pcmcia/ss.h>
55 #include <asm/io.h>
56 #include <asm/system.h>
57 #include <asm/uaccess.h>
59 /*====================================================================*/
61 static const char *if_names[] = { "auto", "10baseT", "10base2"};
63 /* Firmware name */
64 #define FIRMWARE_NAME "ositech/Xilinx7OD.bin"
66 /* Module parameters */
68 MODULE_DESCRIPTION("SMC 91c92 series PCMCIA ethernet driver");
69 MODULE_LICENSE("GPL");
70 MODULE_FIRMWARE(FIRMWARE_NAME);
72 #define INT_MODULE_PARM(n, v) static int n = v; module_param(n, int, 0)
75 Transceiver/media type.
76 0 = auto
77 1 = 10baseT (and autoselect if #define AUTOSELECT),
78 2 = AUI/10base2,
80 INT_MODULE_PARM(if_port, 0);
82 #ifdef PCMCIA_DEBUG
83 INT_MODULE_PARM(pc_debug, PCMCIA_DEBUG);
84 static const char *version =
85 "smc91c92_cs.c 1.123 2006/11/09 Donald Becker, becker@scyld.com.\n";
86 #define DEBUG(n, args...) if (pc_debug>(n)) printk(KERN_DEBUG args)
87 #else
88 #define DEBUG(n, args...)
89 #endif
91 #define DRV_NAME "smc91c92_cs"
92 #define DRV_VERSION "1.123"
94 /*====================================================================*/
96 /* Operational parameter that usually are not changed. */
98 /* Time in jiffies before concluding Tx hung */
99 #define TX_TIMEOUT ((400*HZ)/1000)
101 /* Maximum events (Rx packets, etc.) to handle at each interrupt. */
102 #define INTR_WORK 4
104 /* Times to check the check the chip before concluding that it doesn't
105 currently have room for another Tx packet. */
106 #define MEMORY_WAIT_TIME 8
108 struct smc_private {
109 struct pcmcia_device *p_dev;
110 spinlock_t lock;
111 u_short manfid;
112 u_short cardid;
114 dev_node_t node;
115 struct sk_buff *saved_skb;
116 int packets_waiting;
117 void __iomem *base;
118 u_short cfg;
119 struct timer_list media;
120 int watchdog, tx_err;
121 u_short media_status;
122 u_short fast_poll;
123 u_short link_status;
124 struct mii_if_info mii_if;
125 int duplex;
126 int rx_ovrn;
129 struct smc_cfg_mem {
130 tuple_t tuple;
131 cisparse_t parse;
132 u_char buf[255];
135 /* Special definitions for Megahertz multifunction cards */
136 #define MEGAHERTZ_ISR 0x0380
138 /* Special function registers for Motorola Mariner */
139 #define MOT_LAN 0x0000
140 #define MOT_UART 0x0020
141 #define MOT_EEPROM 0x20
143 #define MOT_NORMAL \
144 (COR_LEVEL_REQ | COR_FUNC_ENA | COR_ADDR_DECODE | COR_IREQ_ENA)
146 /* Special function registers for Ositech cards */
147 #define OSITECH_AUI_CTL 0x0c
148 #define OSITECH_PWRDOWN 0x0d
149 #define OSITECH_RESET 0x0e
150 #define OSITECH_ISR 0x0f
151 #define OSITECH_AUI_PWR 0x0c
152 #define OSITECH_RESET_ISR 0x0e
154 #define OSI_AUI_PWR 0x40
155 #define OSI_LAN_PWRDOWN 0x02
156 #define OSI_MODEM_PWRDOWN 0x01
157 #define OSI_LAN_RESET 0x02
158 #define OSI_MODEM_RESET 0x01
160 /* Symbolic constants for the SMC91c9* series chips, from Erik Stahlman. */
161 #define BANK_SELECT 14 /* Window select register. */
162 #define SMC_SELECT_BANK(x) { outw(x, ioaddr + BANK_SELECT); }
164 /* Bank 0 registers. */
165 #define TCR 0 /* transmit control register */
166 #define TCR_CLEAR 0 /* do NOTHING */
167 #define TCR_ENABLE 0x0001 /* if this is 1, we can transmit */
168 #define TCR_PAD_EN 0x0080 /* pads short packets to 64 bytes */
169 #define TCR_MONCSN 0x0400 /* Monitor Carrier. */
170 #define TCR_FDUPLX 0x0800 /* Full duplex mode. */
171 #define TCR_NORMAL TCR_ENABLE | TCR_PAD_EN
173 #define EPH 2 /* Ethernet Protocol Handler report. */
174 #define EPH_TX_SUC 0x0001
175 #define EPH_SNGLCOL 0x0002
176 #define EPH_MULCOL 0x0004
177 #define EPH_LTX_MULT 0x0008
178 #define EPH_16COL 0x0010
179 #define EPH_SQET 0x0020
180 #define EPH_LTX_BRD 0x0040
181 #define EPH_TX_DEFR 0x0080
182 #define EPH_LAT_COL 0x0200
183 #define EPH_LOST_CAR 0x0400
184 #define EPH_EXC_DEF 0x0800
185 #define EPH_CTR_ROL 0x1000
186 #define EPH_RX_OVRN 0x2000
187 #define EPH_LINK_OK 0x4000
188 #define EPH_TX_UNRN 0x8000
189 #define MEMINFO 8 /* Memory Information Register */
190 #define MEMCFG 10 /* Memory Configuration Register */
192 /* Bank 1 registers. */
193 #define CONFIG 0
194 #define CFG_MII_SELECT 0x8000 /* 91C100 only */
195 #define CFG_NO_WAIT 0x1000
196 #define CFG_FULL_STEP 0x0400
197 #define CFG_SET_SQLCH 0x0200
198 #define CFG_AUI_SELECT 0x0100
199 #define CFG_16BIT 0x0080
200 #define CFG_DIS_LINK 0x0040
201 #define CFG_STATIC 0x0030
202 #define CFG_IRQ_SEL_1 0x0004
203 #define CFG_IRQ_SEL_0 0x0002
204 #define BASE_ADDR 2
205 #define ADDR0 4
206 #define GENERAL 10
207 #define CONTROL 12
208 #define CTL_STORE 0x0001
209 #define CTL_RELOAD 0x0002
210 #define CTL_EE_SELECT 0x0004
211 #define CTL_TE_ENABLE 0x0020
212 #define CTL_CR_ENABLE 0x0040
213 #define CTL_LE_ENABLE 0x0080
214 #define CTL_AUTO_RELEASE 0x0800
215 #define CTL_POWERDOWN 0x2000
217 /* Bank 2 registers. */
218 #define MMU_CMD 0
219 #define MC_ALLOC 0x20 /* or with number of 256 byte packets */
220 #define MC_RESET 0x40
221 #define MC_RELEASE 0x80 /* remove and release the current rx packet */
222 #define MC_FREEPKT 0xA0 /* Release packet in PNR register */
223 #define MC_ENQUEUE 0xC0 /* Enqueue the packet for transmit */
224 #define PNR_ARR 2
225 #define FIFO_PORTS 4
226 #define FP_RXEMPTY 0x8000
227 #define POINTER 6
228 #define PTR_AUTO_INC 0x0040
229 #define PTR_READ 0x2000
230 #define PTR_AUTOINC 0x4000
231 #define PTR_RCV 0x8000
232 #define DATA_1 8
233 #define INTERRUPT 12
234 #define IM_RCV_INT 0x1
235 #define IM_TX_INT 0x2
236 #define IM_TX_EMPTY_INT 0x4
237 #define IM_ALLOC_INT 0x8
238 #define IM_RX_OVRN_INT 0x10
239 #define IM_EPH_INT 0x20
241 #define RCR 4
242 enum RxCfg { RxAllMulti = 0x0004, RxPromisc = 0x0002,
243 RxEnable = 0x0100, RxStripCRC = 0x0200};
244 #define RCR_SOFTRESET 0x8000 /* resets the chip */
245 #define RCR_STRIP_CRC 0x200 /* strips CRC */
246 #define RCR_ENABLE 0x100 /* IFF this is set, we can receive packets */
247 #define RCR_ALMUL 0x4 /* receive all multicast packets */
248 #define RCR_PROMISC 0x2 /* enable promiscuous mode */
250 /* the normal settings for the RCR register : */
251 #define RCR_NORMAL (RCR_STRIP_CRC | RCR_ENABLE)
252 #define RCR_CLEAR 0x0 /* set it to a base state */
253 #define COUNTER 6
255 /* BANK 3 -- not the same values as in smc9194! */
256 #define MULTICAST0 0
257 #define MULTICAST2 2
258 #define MULTICAST4 4
259 #define MULTICAST6 6
260 #define MGMT 8
261 #define REVISION 0x0a
263 /* Transmit status bits. */
264 #define TS_SUCCESS 0x0001
265 #define TS_16COL 0x0010
266 #define TS_LATCOL 0x0200
267 #define TS_LOSTCAR 0x0400
269 /* Receive status bits. */
270 #define RS_ALGNERR 0x8000
271 #define RS_BADCRC 0x2000
272 #define RS_ODDFRAME 0x1000
273 #define RS_TOOLONG 0x0800
274 #define RS_TOOSHORT 0x0400
275 #define RS_MULTICAST 0x0001
276 #define RS_ERRORS (RS_ALGNERR | RS_BADCRC | RS_TOOLONG | RS_TOOSHORT)
278 #define set_bits(v, p) outw(inw(p)|(v), (p))
279 #define mask_bits(v, p) outw(inw(p)&(v), (p))
281 /*====================================================================*/
283 static void smc91c92_detach(struct pcmcia_device *p_dev);
284 static int smc91c92_config(struct pcmcia_device *link);
285 static void smc91c92_release(struct pcmcia_device *link);
287 static int smc_open(struct net_device *dev);
288 static int smc_close(struct net_device *dev);
289 static int smc_ioctl(struct net_device *dev, struct ifreq *rq, int cmd);
290 static void smc_tx_timeout(struct net_device *dev);
291 static netdev_tx_t smc_start_xmit(struct sk_buff *skb,
292 struct net_device *dev);
293 static irqreturn_t smc_interrupt(int irq, void *dev_id);
294 static void smc_rx(struct net_device *dev);
295 static void set_rx_mode(struct net_device *dev);
296 static int s9k_config(struct net_device *dev, struct ifmap *map);
297 static void smc_set_xcvr(struct net_device *dev, int if_port);
298 static void smc_reset(struct net_device *dev);
299 static void media_check(u_long arg);
300 static void mdio_sync(unsigned int addr);
301 static int mdio_read(struct net_device *dev, int phy_id, int loc);
302 static void mdio_write(struct net_device *dev, int phy_id, int loc, int value);
303 static int smc_link_ok(struct net_device *dev);
304 static const struct ethtool_ops ethtool_ops;
306 static const struct net_device_ops smc_netdev_ops = {
307 .ndo_open = smc_open,
308 .ndo_stop = smc_close,
309 .ndo_start_xmit = smc_start_xmit,
310 .ndo_tx_timeout = smc_tx_timeout,
311 .ndo_set_config = s9k_config,
312 .ndo_set_multicast_list = set_rx_mode,
313 .ndo_do_ioctl = &smc_ioctl,
314 .ndo_change_mtu = eth_change_mtu,
315 .ndo_set_mac_address = eth_mac_addr,
316 .ndo_validate_addr = eth_validate_addr,
319 /*======================================================================
321 smc91c92_attach() creates an "instance" of the driver, allocating
322 local data structures for one device. The device is registered
323 with Card Services.
325 ======================================================================*/
327 static int smc91c92_probe(struct pcmcia_device *link)
329 struct smc_private *smc;
330 struct net_device *dev;
332 DEBUG(0, "smc91c92_attach()\n");
334 /* Create new ethernet device */
335 dev = alloc_etherdev(sizeof(struct smc_private));
336 if (!dev)
337 return -ENOMEM;
338 smc = netdev_priv(dev);
339 smc->p_dev = link;
340 link->priv = dev;
342 spin_lock_init(&smc->lock);
343 link->io.NumPorts1 = 16;
344 link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
345 link->io.IOAddrLines = 4;
346 link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING|IRQ_HANDLE_PRESENT;
347 link->irq.IRQInfo1 = IRQ_LEVEL_ID;
348 link->irq.Handler = &smc_interrupt;
349 link->irq.Instance = dev;
350 link->conf.Attributes = CONF_ENABLE_IRQ;
351 link->conf.IntType = INT_MEMORY_AND_IO;
353 /* The SMC91c92-specific entries in the device structure. */
354 dev->netdev_ops = &smc_netdev_ops;
355 SET_ETHTOOL_OPS(dev, &ethtool_ops);
356 dev->watchdog_timeo = TX_TIMEOUT;
358 smc->mii_if.dev = dev;
359 smc->mii_if.mdio_read = mdio_read;
360 smc->mii_if.mdio_write = mdio_write;
361 smc->mii_if.phy_id_mask = 0x1f;
362 smc->mii_if.reg_num_mask = 0x1f;
364 return smc91c92_config(link);
365 } /* smc91c92_attach */
367 /*======================================================================
369 This deletes a driver "instance". The device is de-registered
370 with Card Services. If it has been released, all local data
371 structures are freed. Otherwise, the structures will be freed
372 when the device is released.
374 ======================================================================*/
376 static void smc91c92_detach(struct pcmcia_device *link)
378 struct net_device *dev = link->priv;
380 DEBUG(0, "smc91c92_detach(0x%p)\n", link);
382 if (link->dev_node)
383 unregister_netdev(dev);
385 smc91c92_release(link);
387 free_netdev(dev);
388 } /* smc91c92_detach */
390 /*====================================================================*/
392 static int cvt_ascii_address(struct net_device *dev, char *s)
394 int i, j, da, c;
396 if (strlen(s) != 12)
397 return -1;
398 for (i = 0; i < 6; i++) {
399 da = 0;
400 for (j = 0; j < 2; j++) {
401 c = *s++;
402 da <<= 4;
403 da += ((c >= '0') && (c <= '9')) ?
404 (c - '0') : ((c & 0x0f) + 9);
406 dev->dev_addr[i] = da;
408 return 0;
411 /*====================================================================*/
413 static int first_tuple(struct pcmcia_device *handle, tuple_t *tuple,
414 cisparse_t *parse)
416 int i;
418 i = pcmcia_get_first_tuple(handle, tuple);
419 if (i != 0)
420 return i;
421 i = pcmcia_get_tuple_data(handle, tuple);
422 if (i != 0)
423 return i;
424 return pcmcia_parse_tuple(tuple, parse);
427 static int next_tuple(struct pcmcia_device *handle, tuple_t *tuple,
428 cisparse_t *parse)
430 int i;
432 if ((i = pcmcia_get_next_tuple(handle, tuple)) != 0 ||
433 (i = pcmcia_get_tuple_data(handle, tuple)) != 0)
434 return i;
435 return pcmcia_parse_tuple(tuple, parse);
438 /*======================================================================
440 Configuration stuff for Megahertz cards
442 mhz_3288_power() is used to power up a 3288's ethernet chip.
443 mhz_mfc_config() handles socket setup for multifunction (1144
444 and 3288) cards. mhz_setup() gets a card's hardware ethernet
445 address.
447 ======================================================================*/
449 static int mhz_3288_power(struct pcmcia_device *link)
451 struct net_device *dev = link->priv;
452 struct smc_private *smc = netdev_priv(dev);
453 u_char tmp;
455 /* Read the ISR twice... */
456 readb(smc->base+MEGAHERTZ_ISR);
457 udelay(5);
458 readb(smc->base+MEGAHERTZ_ISR);
460 /* Pause 200ms... */
461 mdelay(200);
463 /* Now read and write the COR... */
464 tmp = readb(smc->base + link->conf.ConfigBase + CISREG_COR);
465 udelay(5);
466 writeb(tmp, smc->base + link->conf.ConfigBase + CISREG_COR);
468 return 0;
471 static int mhz_mfc_config_check(struct pcmcia_device *p_dev,
472 cistpl_cftable_entry_t *cf,
473 cistpl_cftable_entry_t *dflt,
474 unsigned int vcc,
475 void *priv_data)
477 int k;
478 p_dev->io.BasePort2 = cf->io.win[0].base;
479 for (k = 0; k < 0x400; k += 0x10) {
480 if (k & 0x80)
481 continue;
482 p_dev->io.BasePort1 = k ^ 0x300;
483 if (!pcmcia_request_io(p_dev, &p_dev->io))
484 return 0;
486 return -ENODEV;
489 static int mhz_mfc_config(struct pcmcia_device *link)
491 struct net_device *dev = link->priv;
492 struct smc_private *smc = netdev_priv(dev);
493 struct smc_cfg_mem *cfg_mem;
494 win_req_t req;
495 memreq_t mem;
496 int i;
498 cfg_mem = kmalloc(sizeof(struct smc_cfg_mem), GFP_KERNEL);
499 if (!cfg_mem)
500 return -ENOMEM;
502 link->conf.Attributes |= CONF_ENABLE_SPKR;
503 link->conf.Status = CCSR_AUDIO_ENA;
504 link->irq.Attributes =
505 IRQ_TYPE_DYNAMIC_SHARING|IRQ_FIRST_SHARED|IRQ_HANDLE_PRESENT;
506 link->io.IOAddrLines = 16;
507 link->io.Attributes2 = IO_DATA_PATH_WIDTH_8;
508 link->io.NumPorts2 = 8;
510 /* The Megahertz combo cards have modem-like CIS entries, so
511 we have to explicitly try a bunch of port combinations. */
512 if (pcmcia_loop_config(link, mhz_mfc_config_check, NULL))
513 goto free_cfg_mem;
514 dev->base_addr = link->io.BasePort1;
516 /* Allocate a memory window, for accessing the ISR */
517 req.Attributes = WIN_DATA_WIDTH_8|WIN_MEMORY_TYPE_AM|WIN_ENABLE;
518 req.Base = req.Size = 0;
519 req.AccessSpeed = 0;
520 i = pcmcia_request_window(&link, &req, &link->win);
521 if (i != 0)
522 goto free_cfg_mem;
523 smc->base = ioremap(req.Base, req.Size);
524 mem.CardOffset = mem.Page = 0;
525 if (smc->manfid == MANFID_MOTOROLA)
526 mem.CardOffset = link->conf.ConfigBase;
527 i = pcmcia_map_mem_page(link->win, &mem);
529 if ((i == 0)
530 && (smc->manfid == MANFID_MEGAHERTZ)
531 && (smc->cardid == PRODID_MEGAHERTZ_EM3288))
532 mhz_3288_power(link);
534 free_cfg_mem:
535 kfree(cfg_mem);
536 return -ENODEV;
539 static int mhz_setup(struct pcmcia_device *link)
541 struct net_device *dev = link->priv;
542 struct smc_cfg_mem *cfg_mem;
543 tuple_t *tuple;
544 cisparse_t *parse;
545 u_char *buf, *station_addr;
546 int rc;
548 cfg_mem = kmalloc(sizeof(struct smc_cfg_mem), GFP_KERNEL);
549 if (!cfg_mem)
550 return -1;
552 tuple = &cfg_mem->tuple;
553 parse = &cfg_mem->parse;
554 buf = cfg_mem->buf;
556 tuple->Attributes = tuple->TupleOffset = 0;
557 tuple->TupleData = (cisdata_t *)buf;
558 tuple->TupleDataMax = 255;
560 /* Read the station address from the CIS. It is stored as the last
561 (fourth) string in the Version 1 Version/ID tuple. */
562 tuple->DesiredTuple = CISTPL_VERS_1;
563 if (first_tuple(link, tuple, parse) != 0) {
564 rc = -1;
565 goto free_cfg_mem;
567 /* Ugh -- the EM1144 card has two VERS_1 tuples!?! */
568 if (next_tuple(link, tuple, parse) != 0)
569 first_tuple(link, tuple, parse);
570 if (parse->version_1.ns > 3) {
571 station_addr = parse->version_1.str + parse->version_1.ofs[3];
572 if (cvt_ascii_address(dev, station_addr) == 0) {
573 rc = 0;
574 goto free_cfg_mem;
578 /* Another possibility: for the EM3288, in a special tuple */
579 tuple->DesiredTuple = 0x81;
580 if (pcmcia_get_first_tuple(link, tuple) != 0) {
581 rc = -1;
582 goto free_cfg_mem;
584 if (pcmcia_get_tuple_data(link, tuple) != 0) {
585 rc = -1;
586 goto free_cfg_mem;
588 buf[12] = '\0';
589 if (cvt_ascii_address(dev, buf) == 0) {
590 rc = 0;
591 goto free_cfg_mem;
593 rc = -1;
594 free_cfg_mem:
595 kfree(cfg_mem);
596 return rc;
599 /*======================================================================
601 Configuration stuff for the Motorola Mariner
603 mot_config() writes directly to the Mariner configuration
604 registers because the CIS is just bogus.
606 ======================================================================*/
608 static void mot_config(struct pcmcia_device *link)
610 struct net_device *dev = link->priv;
611 struct smc_private *smc = netdev_priv(dev);
612 unsigned int ioaddr = dev->base_addr;
613 unsigned int iouart = link->io.BasePort2;
615 /* Set UART base address and force map with COR bit 1 */
616 writeb(iouart & 0xff, smc->base + MOT_UART + CISREG_IOBASE_0);
617 writeb((iouart >> 8) & 0xff, smc->base + MOT_UART + CISREG_IOBASE_1);
618 writeb(MOT_NORMAL, smc->base + MOT_UART + CISREG_COR);
620 /* Set SMC base address and force map with COR bit 1 */
621 writeb(ioaddr & 0xff, smc->base + MOT_LAN + CISREG_IOBASE_0);
622 writeb((ioaddr >> 8) & 0xff, smc->base + MOT_LAN + CISREG_IOBASE_1);
623 writeb(MOT_NORMAL, smc->base + MOT_LAN + CISREG_COR);
625 /* Wait for things to settle down */
626 mdelay(100);
629 static int mot_setup(struct pcmcia_device *link)
631 struct net_device *dev = link->priv;
632 unsigned int ioaddr = dev->base_addr;
633 int i, wait, loop;
634 u_int addr;
636 /* Read Ethernet address from Serial EEPROM */
638 for (i = 0; i < 3; i++) {
639 SMC_SELECT_BANK(2);
640 outw(MOT_EEPROM + i, ioaddr + POINTER);
641 SMC_SELECT_BANK(1);
642 outw((CTL_RELOAD | CTL_EE_SELECT), ioaddr + CONTROL);
644 for (loop = wait = 0; loop < 200; loop++) {
645 udelay(10);
646 wait = ((CTL_RELOAD | CTL_STORE) & inw(ioaddr + CONTROL));
647 if (wait == 0) break;
650 if (wait)
651 return -1;
653 addr = inw(ioaddr + GENERAL);
654 dev->dev_addr[2*i] = addr & 0xff;
655 dev->dev_addr[2*i+1] = (addr >> 8) & 0xff;
658 return 0;
661 /*====================================================================*/
663 static int smc_configcheck(struct pcmcia_device *p_dev,
664 cistpl_cftable_entry_t *cf,
665 cistpl_cftable_entry_t *dflt,
666 unsigned int vcc,
667 void *priv_data)
669 p_dev->io.BasePort1 = cf->io.win[0].base;
670 p_dev->io.IOAddrLines = cf->io.flags & CISTPL_IO_LINES_MASK;
671 return pcmcia_request_io(p_dev, &p_dev->io);
674 static int smc_config(struct pcmcia_device *link)
676 struct net_device *dev = link->priv;
677 int i;
679 link->io.NumPorts1 = 16;
680 i = pcmcia_loop_config(link, smc_configcheck, NULL);
681 if (!i)
682 dev->base_addr = link->io.BasePort1;
684 return i;
687 static int smc_setup(struct pcmcia_device *link)
689 struct net_device *dev = link->priv;
690 struct smc_cfg_mem *cfg_mem;
691 tuple_t *tuple;
692 cisparse_t *parse;
693 cistpl_lan_node_id_t *node_id;
694 u_char *buf, *station_addr;
695 int i, rc;
697 cfg_mem = kmalloc(sizeof(struct smc_cfg_mem), GFP_KERNEL);
698 if (!cfg_mem)
699 return -ENOMEM;
701 tuple = &cfg_mem->tuple;
702 parse = &cfg_mem->parse;
703 buf = cfg_mem->buf;
705 tuple->Attributes = tuple->TupleOffset = 0;
706 tuple->TupleData = (cisdata_t *)buf;
707 tuple->TupleDataMax = 255;
709 /* Check for a LAN function extension tuple */
710 tuple->DesiredTuple = CISTPL_FUNCE;
711 i = first_tuple(link, tuple, parse);
712 while (i == 0) {
713 if (parse->funce.type == CISTPL_FUNCE_LAN_NODE_ID)
714 break;
715 i = next_tuple(link, tuple, parse);
717 if (i == 0) {
718 node_id = (cistpl_lan_node_id_t *)parse->funce.data;
719 if (node_id->nb == 6) {
720 for (i = 0; i < 6; i++)
721 dev->dev_addr[i] = node_id->id[i];
722 rc = 0;
723 goto free_cfg_mem;
726 /* Try the third string in the Version 1 Version/ID tuple. */
727 if (link->prod_id[2]) {
728 station_addr = link->prod_id[2];
729 if (cvt_ascii_address(dev, station_addr) == 0) {
730 rc = 0;
731 goto free_cfg_mem;
735 rc = -1;
736 free_cfg_mem:
737 kfree(cfg_mem);
738 return rc;
741 /*====================================================================*/
743 static int osi_config(struct pcmcia_device *link)
745 struct net_device *dev = link->priv;
746 static const unsigned int com[4] = { 0x3f8, 0x2f8, 0x3e8, 0x2e8 };
747 int i, j;
749 link->conf.Attributes |= CONF_ENABLE_SPKR;
750 link->conf.Status = CCSR_AUDIO_ENA;
751 link->irq.Attributes =
752 IRQ_TYPE_DYNAMIC_SHARING|IRQ_FIRST_SHARED|IRQ_HANDLE_PRESENT;
753 link->io.NumPorts1 = 64;
754 link->io.Attributes2 = IO_DATA_PATH_WIDTH_8;
755 link->io.NumPorts2 = 8;
756 link->io.IOAddrLines = 16;
758 /* Enable Hard Decode, LAN, Modem */
759 link->conf.ConfigIndex = 0x23;
761 for (i = j = 0; j < 4; j++) {
762 link->io.BasePort2 = com[j];
763 i = pcmcia_request_io(link, &link->io);
764 if (i == 0)
765 break;
767 if (i != 0) {
768 /* Fallback: turn off hard decode */
769 link->conf.ConfigIndex = 0x03;
770 link->io.NumPorts2 = 0;
771 i = pcmcia_request_io(link, &link->io);
773 dev->base_addr = link->io.BasePort1 + 0x10;
774 return i;
777 static int osi_load_firmware(struct pcmcia_device *link)
779 const struct firmware *fw;
780 int i, err;
782 err = request_firmware(&fw, FIRMWARE_NAME, &link->dev);
783 if (err) {
784 pr_err("Failed to load firmware \"%s\"\n", FIRMWARE_NAME);
785 return err;
788 /* Download the Seven of Diamonds firmware */
789 for (i = 0; i < fw->size; i++) {
790 outb(fw->data[i], link->io.BasePort1 + 2);
791 udelay(50);
793 release_firmware(fw);
794 return err;
797 static int osi_setup(struct pcmcia_device *link, u_short manfid, u_short cardid)
799 struct net_device *dev = link->priv;
800 struct smc_cfg_mem *cfg_mem;
801 tuple_t *tuple;
802 u_char *buf;
803 int i, rc;
805 cfg_mem = kmalloc(sizeof(struct smc_cfg_mem), GFP_KERNEL);
806 if (!cfg_mem)
807 return -1;
809 tuple = &cfg_mem->tuple;
810 buf = cfg_mem->buf;
812 tuple->Attributes = TUPLE_RETURN_COMMON;
813 tuple->TupleData = (cisdata_t *)buf;
814 tuple->TupleDataMax = 255;
815 tuple->TupleOffset = 0;
817 /* Read the station address from tuple 0x90, subtuple 0x04 */
818 tuple->DesiredTuple = 0x90;
819 i = pcmcia_get_first_tuple(link, tuple);
820 while (i == 0) {
821 i = pcmcia_get_tuple_data(link, tuple);
822 if ((i != 0) || (buf[0] == 0x04))
823 break;
824 i = pcmcia_get_next_tuple(link, tuple);
826 if (i != 0) {
827 rc = -1;
828 goto free_cfg_mem;
830 for (i = 0; i < 6; i++)
831 dev->dev_addr[i] = buf[i+2];
833 if (((manfid == MANFID_OSITECH) &&
834 (cardid == PRODID_OSITECH_SEVEN)) ||
835 ((manfid == MANFID_PSION) &&
836 (cardid == PRODID_PSION_NET100))) {
837 rc = osi_load_firmware(link);
838 if (rc)
839 goto free_cfg_mem;
840 } else if (manfid == MANFID_OSITECH) {
841 /* Make sure both functions are powered up */
842 set_bits(0x300, link->io.BasePort1 + OSITECH_AUI_PWR);
843 /* Now, turn on the interrupt for both card functions */
844 set_bits(0x300, link->io.BasePort1 + OSITECH_RESET_ISR);
845 DEBUG(2, "AUI/PWR: %4.4x RESET/ISR: %4.4x\n",
846 inw(link->io.BasePort1 + OSITECH_AUI_PWR),
847 inw(link->io.BasePort1 + OSITECH_RESET_ISR));
849 rc = 0;
850 free_cfg_mem:
851 kfree(cfg_mem);
852 return rc;
855 static int smc91c92_suspend(struct pcmcia_device *link)
857 struct net_device *dev = link->priv;
859 if (link->open)
860 netif_device_detach(dev);
862 return 0;
865 static int smc91c92_resume(struct pcmcia_device *link)
867 struct net_device *dev = link->priv;
868 struct smc_private *smc = netdev_priv(dev);
869 int i;
871 if ((smc->manfid == MANFID_MEGAHERTZ) &&
872 (smc->cardid == PRODID_MEGAHERTZ_EM3288))
873 mhz_3288_power(link);
874 if (smc->manfid == MANFID_MOTOROLA)
875 mot_config(link);
876 if ((smc->manfid == MANFID_OSITECH) &&
877 (smc->cardid != PRODID_OSITECH_SEVEN)) {
878 /* Power up the card and enable interrupts */
879 set_bits(0x0300, dev->base_addr-0x10+OSITECH_AUI_PWR);
880 set_bits(0x0300, dev->base_addr-0x10+OSITECH_RESET_ISR);
882 if (((smc->manfid == MANFID_OSITECH) &&
883 (smc->cardid == PRODID_OSITECH_SEVEN)) ||
884 ((smc->manfid == MANFID_PSION) &&
885 (smc->cardid == PRODID_PSION_NET100))) {
886 i = osi_load_firmware(link);
887 if (i) {
888 pr_err("smc91c92_cs: Failed to load firmware\n");
889 return i;
892 if (link->open) {
893 smc_reset(dev);
894 netif_device_attach(dev);
897 return 0;
901 /*======================================================================
903 This verifies that the chip is some SMC91cXX variant, and returns
904 the revision code if successful. Otherwise, it returns -ENODEV.
906 ======================================================================*/
908 static int check_sig(struct pcmcia_device *link)
910 struct net_device *dev = link->priv;
911 unsigned int ioaddr = dev->base_addr;
912 int width;
913 u_short s;
915 SMC_SELECT_BANK(1);
916 if (inw(ioaddr + BANK_SELECT) >> 8 != 0x33) {
917 /* Try powering up the chip */
918 outw(0, ioaddr + CONTROL);
919 mdelay(55);
922 /* Try setting bus width */
923 width = (link->io.Attributes1 == IO_DATA_PATH_WIDTH_AUTO);
924 s = inb(ioaddr + CONFIG);
925 if (width)
926 s |= CFG_16BIT;
927 else
928 s &= ~CFG_16BIT;
929 outb(s, ioaddr + CONFIG);
931 /* Check Base Address Register to make sure bus width is OK */
932 s = inw(ioaddr + BASE_ADDR);
933 if ((inw(ioaddr + BANK_SELECT) >> 8 == 0x33) &&
934 ((s >> 8) != (s & 0xff))) {
935 SMC_SELECT_BANK(3);
936 s = inw(ioaddr + REVISION);
937 return (s & 0xff);
940 if (width) {
941 modconf_t mod = {
942 .Attributes = CONF_IO_CHANGE_WIDTH,
944 printk(KERN_INFO "smc91c92_cs: using 8-bit IO window.\n");
946 smc91c92_suspend(link);
947 pcmcia_modify_configuration(link, &mod);
948 smc91c92_resume(link);
949 return check_sig(link);
951 return -ENODEV;
954 /*======================================================================
956 smc91c92_config() is scheduled to run after a CARD_INSERTION event
957 is received, to configure the PCMCIA socket, and to make the
958 ethernet device available to the system.
960 ======================================================================*/
962 #define CS_EXIT_TEST(ret, svc, label) \
963 if (ret != 0) { \
964 cs_error(link, svc, ret); \
965 goto label; \
968 static int smc91c92_config(struct pcmcia_device *link)
970 struct net_device *dev = link->priv;
971 struct smc_private *smc = netdev_priv(dev);
972 char *name;
973 int i, j, rev;
974 unsigned int ioaddr;
975 u_long mir;
977 DEBUG(0, "smc91c92_config(0x%p)\n", link);
979 smc->manfid = link->manf_id;
980 smc->cardid = link->card_id;
982 if ((smc->manfid == MANFID_OSITECH) &&
983 (smc->cardid != PRODID_OSITECH_SEVEN)) {
984 i = osi_config(link);
985 } else if ((smc->manfid == MANFID_MOTOROLA) ||
986 ((smc->manfid == MANFID_MEGAHERTZ) &&
987 ((smc->cardid == PRODID_MEGAHERTZ_VARIOUS) ||
988 (smc->cardid == PRODID_MEGAHERTZ_EM3288)))) {
989 i = mhz_mfc_config(link);
990 } else {
991 i = smc_config(link);
993 CS_EXIT_TEST(i, RequestIO, config_failed);
995 i = pcmcia_request_irq(link, &link->irq);
996 CS_EXIT_TEST(i, RequestIRQ, config_failed);
997 i = pcmcia_request_configuration(link, &link->conf);
998 CS_EXIT_TEST(i, RequestConfiguration, config_failed);
1000 if (smc->manfid == MANFID_MOTOROLA)
1001 mot_config(link);
1003 dev->irq = link->irq.AssignedIRQ;
1005 if ((if_port >= 0) && (if_port <= 2))
1006 dev->if_port = if_port;
1007 else
1008 printk(KERN_NOTICE "smc91c92_cs: invalid if_port requested\n");
1010 switch (smc->manfid) {
1011 case MANFID_OSITECH:
1012 case MANFID_PSION:
1013 i = osi_setup(link, smc->manfid, smc->cardid); break;
1014 case MANFID_SMC:
1015 case MANFID_NEW_MEDIA:
1016 i = smc_setup(link); break;
1017 case 0x128: /* For broken Megahertz cards */
1018 case MANFID_MEGAHERTZ:
1019 i = mhz_setup(link); break;
1020 case MANFID_MOTOROLA:
1021 default: /* get the hw address from EEPROM */
1022 i = mot_setup(link); break;
1025 if (i != 0) {
1026 printk(KERN_NOTICE "smc91c92_cs: Unable to find hardware address.\n");
1027 goto config_undo;
1030 smc->duplex = 0;
1031 smc->rx_ovrn = 0;
1033 rev = check_sig(link);
1034 name = "???";
1035 if (rev > 0)
1036 switch (rev >> 4) {
1037 case 3: name = "92"; break;
1038 case 4: name = ((rev & 15) >= 6) ? "96" : "94"; break;
1039 case 5: name = "95"; break;
1040 case 7: name = "100"; break;
1041 case 8: name = "100-FD"; break;
1042 case 9: name = "110"; break;
1045 ioaddr = dev->base_addr;
1046 if (rev > 0) {
1047 u_long mcr;
1048 SMC_SELECT_BANK(0);
1049 mir = inw(ioaddr + MEMINFO) & 0xff;
1050 if (mir == 0xff) mir++;
1051 /* Get scale factor for memory size */
1052 mcr = ((rev >> 4) > 3) ? inw(ioaddr + MEMCFG) : 0x0200;
1053 mir *= 128 * (1<<((mcr >> 9) & 7));
1054 SMC_SELECT_BANK(1);
1055 smc->cfg = inw(ioaddr + CONFIG) & ~CFG_AUI_SELECT;
1056 smc->cfg |= CFG_NO_WAIT | CFG_16BIT | CFG_STATIC;
1057 if (smc->manfid == MANFID_OSITECH)
1058 smc->cfg |= CFG_IRQ_SEL_1 | CFG_IRQ_SEL_0;
1059 if ((rev >> 4) >= 7)
1060 smc->cfg |= CFG_MII_SELECT;
1061 } else
1062 mir = 0;
1064 if (smc->cfg & CFG_MII_SELECT) {
1065 SMC_SELECT_BANK(3);
1067 for (i = 0; i < 32; i++) {
1068 j = mdio_read(dev, i, 1);
1069 if ((j != 0) && (j != 0xffff)) break;
1071 smc->mii_if.phy_id = (i < 32) ? i : -1;
1073 SMC_SELECT_BANK(0);
1076 link->dev_node = &smc->node;
1077 SET_NETDEV_DEV(dev, &handle_to_dev(link));
1079 if (register_netdev(dev) != 0) {
1080 printk(KERN_ERR "smc91c92_cs: register_netdev() failed\n");
1081 link->dev_node = NULL;
1082 goto config_undo;
1085 strcpy(smc->node.dev_name, dev->name);
1087 printk(KERN_INFO "%s: smc91c%s rev %d: io %#3lx, irq %d, "
1088 "hw_addr %pM\n",
1089 dev->name, name, (rev & 0x0f), dev->base_addr, dev->irq,
1090 dev->dev_addr);
1092 if (rev > 0) {
1093 if (mir & 0x3ff)
1094 printk(KERN_INFO " %lu byte", mir);
1095 else
1096 printk(KERN_INFO " %lu kb", mir>>10);
1097 printk(" buffer, %s xcvr\n", (smc->cfg & CFG_MII_SELECT) ?
1098 "MII" : if_names[dev->if_port]);
1101 if (smc->cfg & CFG_MII_SELECT) {
1102 if (smc->mii_if.phy_id != -1) {
1103 DEBUG(0, " MII transceiver at index %d, status %x.\n",
1104 smc->mii_if.phy_id, j);
1105 } else {
1106 printk(KERN_NOTICE " No MII transceivers found!\n");
1109 return 0;
1111 config_undo:
1112 unregister_netdev(dev);
1113 config_failed: /* CS_EXIT_TEST() calls jump to here... */
1114 smc91c92_release(link);
1115 return -ENODEV;
1116 } /* smc91c92_config */
1118 /*======================================================================
1120 After a card is removed, smc91c92_release() will unregister the net
1121 device, and release the PCMCIA configuration. If the device is
1122 still open, this will be postponed until it is closed.
1124 ======================================================================*/
1126 static void smc91c92_release(struct pcmcia_device *link)
1128 DEBUG(0, "smc91c92_release(0x%p)\n", link);
1129 if (link->win) {
1130 struct net_device *dev = link->priv;
1131 struct smc_private *smc = netdev_priv(dev);
1132 iounmap(smc->base);
1134 pcmcia_disable_device(link);
1137 /*======================================================================
1139 MII interface support for SMC91cXX based cards
1140 ======================================================================*/
1142 #define MDIO_SHIFT_CLK 0x04
1143 #define MDIO_DATA_OUT 0x01
1144 #define MDIO_DIR_WRITE 0x08
1145 #define MDIO_DATA_WRITE0 (MDIO_DIR_WRITE)
1146 #define MDIO_DATA_WRITE1 (MDIO_DIR_WRITE | MDIO_DATA_OUT)
1147 #define MDIO_DATA_READ 0x02
1149 static void mdio_sync(unsigned int addr)
1151 int bits;
1152 for (bits = 0; bits < 32; bits++) {
1153 outb(MDIO_DATA_WRITE1, addr);
1154 outb(MDIO_DATA_WRITE1 | MDIO_SHIFT_CLK, addr);
1158 static int mdio_read(struct net_device *dev, int phy_id, int loc)
1160 unsigned int addr = dev->base_addr + MGMT;
1161 u_int cmd = (0x06<<10)|(phy_id<<5)|loc;
1162 int i, retval = 0;
1164 mdio_sync(addr);
1165 for (i = 13; i >= 0; i--) {
1166 int dat = (cmd&(1<<i)) ? MDIO_DATA_WRITE1 : MDIO_DATA_WRITE0;
1167 outb(dat, addr);
1168 outb(dat | MDIO_SHIFT_CLK, addr);
1170 for (i = 19; i > 0; i--) {
1171 outb(0, addr);
1172 retval = (retval << 1) | ((inb(addr) & MDIO_DATA_READ) != 0);
1173 outb(MDIO_SHIFT_CLK, addr);
1175 return (retval>>1) & 0xffff;
1178 static void mdio_write(struct net_device *dev, int phy_id, int loc, int value)
1180 unsigned int addr = dev->base_addr + MGMT;
1181 u_int cmd = (0x05<<28)|(phy_id<<23)|(loc<<18)|(1<<17)|value;
1182 int i;
1184 mdio_sync(addr);
1185 for (i = 31; i >= 0; i--) {
1186 int dat = (cmd&(1<<i)) ? MDIO_DATA_WRITE1 : MDIO_DATA_WRITE0;
1187 outb(dat, addr);
1188 outb(dat | MDIO_SHIFT_CLK, addr);
1190 for (i = 1; i >= 0; i--) {
1191 outb(0, addr);
1192 outb(MDIO_SHIFT_CLK, addr);
1196 /*======================================================================
1198 The driver core code, most of which should be common with a
1199 non-PCMCIA implementation.
1201 ======================================================================*/
1203 #ifdef PCMCIA_DEBUG
1204 static void smc_dump(struct net_device *dev)
1206 unsigned int ioaddr = dev->base_addr;
1207 u_short i, w, save;
1208 save = inw(ioaddr + BANK_SELECT);
1209 for (w = 0; w < 4; w++) {
1210 SMC_SELECT_BANK(w);
1211 printk(KERN_DEBUG "bank %d: ", w);
1212 for (i = 0; i < 14; i += 2)
1213 printk(" %04x", inw(ioaddr + i));
1214 printk("\n");
1216 outw(save, ioaddr + BANK_SELECT);
1218 #endif
1220 static int smc_open(struct net_device *dev)
1222 struct smc_private *smc = netdev_priv(dev);
1223 struct pcmcia_device *link = smc->p_dev;
1225 #ifdef PCMCIA_DEBUG
1226 DEBUG(0, "%s: smc_open(%p), ID/Window %4.4x.\n",
1227 dev->name, dev, inw(dev->base_addr + BANK_SELECT));
1228 if (pc_debug > 1) smc_dump(dev);
1229 #endif
1231 /* Check that the PCMCIA card is still here. */
1232 if (!pcmcia_dev_present(link))
1233 return -ENODEV;
1234 /* Physical device present signature. */
1235 if (check_sig(link) < 0) {
1236 printk("smc91c92_cs: Yikes! Bad chip signature!\n");
1237 return -ENODEV;
1239 link->open++;
1241 netif_start_queue(dev);
1242 smc->saved_skb = NULL;
1243 smc->packets_waiting = 0;
1245 smc_reset(dev);
1246 init_timer(&smc->media);
1247 smc->media.function = &media_check;
1248 smc->media.data = (u_long) dev;
1249 smc->media.expires = jiffies + HZ;
1250 add_timer(&smc->media);
1252 return 0;
1253 } /* smc_open */
1255 /*====================================================================*/
1257 static int smc_close(struct net_device *dev)
1259 struct smc_private *smc = netdev_priv(dev);
1260 struct pcmcia_device *link = smc->p_dev;
1261 unsigned int ioaddr = dev->base_addr;
1263 DEBUG(0, "%s: smc_close(), status %4.4x.\n",
1264 dev->name, inw(ioaddr + BANK_SELECT));
1266 netif_stop_queue(dev);
1268 /* Shut off all interrupts, and turn off the Tx and Rx sections.
1269 Don't bother to check for chip present. */
1270 SMC_SELECT_BANK(2); /* Nominally paranoia, but do no assume... */
1271 outw(0, ioaddr + INTERRUPT);
1272 SMC_SELECT_BANK(0);
1273 mask_bits(0xff00, ioaddr + RCR);
1274 mask_bits(0xff00, ioaddr + TCR);
1276 /* Put the chip into power-down mode. */
1277 SMC_SELECT_BANK(1);
1278 outw(CTL_POWERDOWN, ioaddr + CONTROL );
1280 link->open--;
1281 del_timer_sync(&smc->media);
1283 return 0;
1284 } /* smc_close */
1286 /*======================================================================
1288 Transfer a packet to the hardware and trigger the packet send.
1289 This may be called at either from either the Tx queue code
1290 or the interrupt handler.
1292 ======================================================================*/
1294 static void smc_hardware_send_packet(struct net_device * dev)
1296 struct smc_private *smc = netdev_priv(dev);
1297 struct sk_buff *skb = smc->saved_skb;
1298 unsigned int ioaddr = dev->base_addr;
1299 u_char packet_no;
1301 if (!skb) {
1302 printk(KERN_ERR "%s: In XMIT with no packet to send.\n", dev->name);
1303 return;
1306 /* There should be a packet slot waiting. */
1307 packet_no = inw(ioaddr + PNR_ARR) >> 8;
1308 if (packet_no & 0x80) {
1309 /* If not, there is a hardware problem! Likely an ejected card. */
1310 printk(KERN_WARNING "%s: 91c92 hardware Tx buffer allocation"
1311 " failed, status %#2.2x.\n", dev->name, packet_no);
1312 dev_kfree_skb_irq(skb);
1313 smc->saved_skb = NULL;
1314 netif_start_queue(dev);
1315 return;
1318 dev->stats.tx_bytes += skb->len;
1319 /* The card should use the just-allocated buffer. */
1320 outw(packet_no, ioaddr + PNR_ARR);
1321 /* point to the beginning of the packet */
1322 outw(PTR_AUTOINC , ioaddr + POINTER);
1324 /* Send the packet length (+6 for status, length and ctl byte)
1325 and the status word (set to zeros). */
1327 u_char *buf = skb->data;
1328 u_int length = skb->len; /* The chip will pad to ethernet min. */
1330 DEBUG(2, "%s: Trying to xmit packet of length %d.\n",
1331 dev->name, length);
1333 /* send the packet length: +6 for status word, length, and ctl */
1334 outw(0, ioaddr + DATA_1);
1335 outw(length + 6, ioaddr + DATA_1);
1336 outsw(ioaddr + DATA_1, buf, length >> 1);
1338 /* The odd last byte, if there is one, goes in the control word. */
1339 outw((length & 1) ? 0x2000 | buf[length-1] : 0, ioaddr + DATA_1);
1342 /* Enable the Tx interrupts, both Tx (TxErr) and TxEmpty. */
1343 outw(((IM_TX_INT|IM_TX_EMPTY_INT)<<8) |
1344 (inw(ioaddr + INTERRUPT) & 0xff00),
1345 ioaddr + INTERRUPT);
1347 /* The chip does the rest of the work. */
1348 outw(MC_ENQUEUE , ioaddr + MMU_CMD);
1350 smc->saved_skb = NULL;
1351 dev_kfree_skb_irq(skb);
1352 dev->trans_start = jiffies;
1353 netif_start_queue(dev);
1354 return;
1357 /*====================================================================*/
1359 static void smc_tx_timeout(struct net_device *dev)
1361 struct smc_private *smc = netdev_priv(dev);
1362 unsigned int ioaddr = dev->base_addr;
1364 printk(KERN_NOTICE "%s: SMC91c92 transmit timed out, "
1365 "Tx_status %2.2x status %4.4x.\n",
1366 dev->name, inw(ioaddr)&0xff, inw(ioaddr + 2));
1367 dev->stats.tx_errors++;
1368 smc_reset(dev);
1369 dev->trans_start = jiffies;
1370 smc->saved_skb = NULL;
1371 netif_wake_queue(dev);
1374 static netdev_tx_t smc_start_xmit(struct sk_buff *skb,
1375 struct net_device *dev)
1377 struct smc_private *smc = netdev_priv(dev);
1378 unsigned int ioaddr = dev->base_addr;
1379 u_short num_pages;
1380 short time_out, ir;
1381 unsigned long flags;
1383 netif_stop_queue(dev);
1385 DEBUG(2, "%s: smc_start_xmit(length = %d) called,"
1386 " status %4.4x.\n", dev->name, skb->len, inw(ioaddr + 2));
1388 if (smc->saved_skb) {
1389 /* THIS SHOULD NEVER HAPPEN. */
1390 dev->stats.tx_aborted_errors++;
1391 printk(KERN_DEBUG "%s: Internal error -- sent packet while busy.\n",
1392 dev->name);
1393 return NETDEV_TX_BUSY;
1395 smc->saved_skb = skb;
1397 num_pages = skb->len >> 8;
1399 if (num_pages > 7) {
1400 printk(KERN_ERR "%s: Far too big packet error.\n", dev->name);
1401 dev_kfree_skb (skb);
1402 smc->saved_skb = NULL;
1403 dev->stats.tx_dropped++;
1404 return NETDEV_TX_OK; /* Do not re-queue this packet. */
1406 /* A packet is now waiting. */
1407 smc->packets_waiting++;
1409 spin_lock_irqsave(&smc->lock, flags);
1410 SMC_SELECT_BANK(2); /* Paranoia, we should always be in window 2 */
1412 /* need MC_RESET to keep the memory consistent. errata? */
1413 if (smc->rx_ovrn) {
1414 outw(MC_RESET, ioaddr + MMU_CMD);
1415 smc->rx_ovrn = 0;
1418 /* Allocate the memory; send the packet now if we win. */
1419 outw(MC_ALLOC | num_pages, ioaddr + MMU_CMD);
1420 for (time_out = MEMORY_WAIT_TIME; time_out >= 0; time_out--) {
1421 ir = inw(ioaddr+INTERRUPT);
1422 if (ir & IM_ALLOC_INT) {
1423 /* Acknowledge the interrupt, send the packet. */
1424 outw((ir&0xff00) | IM_ALLOC_INT, ioaddr + INTERRUPT);
1425 smc_hardware_send_packet(dev); /* Send the packet now.. */
1426 spin_unlock_irqrestore(&smc->lock, flags);
1427 return NETDEV_TX_OK;
1431 /* Otherwise defer until the Tx-space-allocated interrupt. */
1432 DEBUG(2, "%s: memory allocation deferred.\n", dev->name);
1433 outw((IM_ALLOC_INT << 8) | (ir & 0xff00), ioaddr + INTERRUPT);
1434 spin_unlock_irqrestore(&smc->lock, flags);
1436 return NETDEV_TX_OK;
1439 /*======================================================================
1441 Handle a Tx anomolous event. Entered while in Window 2.
1443 ======================================================================*/
1445 static void smc_tx_err(struct net_device * dev)
1447 struct smc_private *smc = netdev_priv(dev);
1448 unsigned int ioaddr = dev->base_addr;
1449 int saved_packet = inw(ioaddr + PNR_ARR) & 0xff;
1450 int packet_no = inw(ioaddr + FIFO_PORTS) & 0x7f;
1451 int tx_status;
1453 /* select this as the packet to read from */
1454 outw(packet_no, ioaddr + PNR_ARR);
1456 /* read the first word from this packet */
1457 outw(PTR_AUTOINC | PTR_READ | 0, ioaddr + POINTER);
1459 tx_status = inw(ioaddr + DATA_1);
1461 dev->stats.tx_errors++;
1462 if (tx_status & TS_LOSTCAR) dev->stats.tx_carrier_errors++;
1463 if (tx_status & TS_LATCOL) dev->stats.tx_window_errors++;
1464 if (tx_status & TS_16COL) {
1465 dev->stats.tx_aborted_errors++;
1466 smc->tx_err++;
1469 if (tx_status & TS_SUCCESS) {
1470 printk(KERN_NOTICE "%s: Successful packet caused error "
1471 "interrupt?\n", dev->name);
1473 /* re-enable transmit */
1474 SMC_SELECT_BANK(0);
1475 outw(inw(ioaddr + TCR) | TCR_ENABLE | smc->duplex, ioaddr + TCR);
1476 SMC_SELECT_BANK(2);
1478 outw(MC_FREEPKT, ioaddr + MMU_CMD); /* Free the packet memory. */
1480 /* one less packet waiting for me */
1481 smc->packets_waiting--;
1483 outw(saved_packet, ioaddr + PNR_ARR);
1484 return;
1487 /*====================================================================*/
1489 static void smc_eph_irq(struct net_device *dev)
1491 struct smc_private *smc = netdev_priv(dev);
1492 unsigned int ioaddr = dev->base_addr;
1493 u_short card_stats, ephs;
1495 SMC_SELECT_BANK(0);
1496 ephs = inw(ioaddr + EPH);
1497 DEBUG(2, "%s: Ethernet protocol handler interrupt, status"
1498 " %4.4x.\n", dev->name, ephs);
1499 /* Could be a counter roll-over warning: update stats. */
1500 card_stats = inw(ioaddr + COUNTER);
1501 /* single collisions */
1502 dev->stats.collisions += card_stats & 0xF;
1503 card_stats >>= 4;
1504 /* multiple collisions */
1505 dev->stats.collisions += card_stats & 0xF;
1506 #if 0 /* These are for when linux supports these statistics */
1507 card_stats >>= 4; /* deferred */
1508 card_stats >>= 4; /* excess deferred */
1509 #endif
1510 /* If we had a transmit error we must re-enable the transmitter. */
1511 outw(inw(ioaddr + TCR) | TCR_ENABLE | smc->duplex, ioaddr + TCR);
1513 /* Clear a link error interrupt. */
1514 SMC_SELECT_BANK(1);
1515 outw(CTL_AUTO_RELEASE | 0x0000, ioaddr + CONTROL);
1516 outw(CTL_AUTO_RELEASE | CTL_TE_ENABLE | CTL_CR_ENABLE,
1517 ioaddr + CONTROL);
1518 SMC_SELECT_BANK(2);
1521 /*====================================================================*/
1523 static irqreturn_t smc_interrupt(int irq, void *dev_id)
1525 struct net_device *dev = dev_id;
1526 struct smc_private *smc = netdev_priv(dev);
1527 unsigned int ioaddr;
1528 u_short saved_bank, saved_pointer, mask, status;
1529 unsigned int handled = 1;
1530 char bogus_cnt = INTR_WORK; /* Work we are willing to do. */
1532 if (!netif_device_present(dev))
1533 return IRQ_NONE;
1535 ioaddr = dev->base_addr;
1537 DEBUG(3, "%s: SMC91c92 interrupt %d at %#x.\n", dev->name,
1538 irq, ioaddr);
1540 spin_lock(&smc->lock);
1541 smc->watchdog = 0;
1542 saved_bank = inw(ioaddr + BANK_SELECT);
1543 if ((saved_bank & 0xff00) != 0x3300) {
1544 /* The device does not exist -- the card could be off-line, or
1545 maybe it has been ejected. */
1546 DEBUG(1, "%s: SMC91c92 interrupt %d for non-existent"
1547 "/ejected device.\n", dev->name, irq);
1548 handled = 0;
1549 goto irq_done;
1552 SMC_SELECT_BANK(2);
1553 saved_pointer = inw(ioaddr + POINTER);
1554 mask = inw(ioaddr + INTERRUPT) >> 8;
1555 /* clear all interrupts */
1556 outw(0, ioaddr + INTERRUPT);
1558 do { /* read the status flag, and mask it */
1559 status = inw(ioaddr + INTERRUPT) & 0xff;
1560 DEBUG(3, "%s: Status is %#2.2x (mask %#2.2x).\n", dev->name,
1561 status, mask);
1562 if ((status & mask) == 0) {
1563 if (bogus_cnt == INTR_WORK)
1564 handled = 0;
1565 break;
1567 if (status & IM_RCV_INT) {
1568 /* Got a packet(s). */
1569 smc_rx(dev);
1571 if (status & IM_TX_INT) {
1572 smc_tx_err(dev);
1573 outw(IM_TX_INT, ioaddr + INTERRUPT);
1575 status &= mask;
1576 if (status & IM_TX_EMPTY_INT) {
1577 outw(IM_TX_EMPTY_INT, ioaddr + INTERRUPT);
1578 mask &= ~IM_TX_EMPTY_INT;
1579 dev->stats.tx_packets += smc->packets_waiting;
1580 smc->packets_waiting = 0;
1582 if (status & IM_ALLOC_INT) {
1583 /* Clear this interrupt so it doesn't happen again */
1584 mask &= ~IM_ALLOC_INT;
1586 smc_hardware_send_packet(dev);
1588 /* enable xmit interrupts based on this */
1589 mask |= (IM_TX_EMPTY_INT | IM_TX_INT);
1591 /* and let the card send more packets to me */
1592 netif_wake_queue(dev);
1594 if (status & IM_RX_OVRN_INT) {
1595 dev->stats.rx_errors++;
1596 dev->stats.rx_fifo_errors++;
1597 if (smc->duplex)
1598 smc->rx_ovrn = 1; /* need MC_RESET outside smc_interrupt */
1599 outw(IM_RX_OVRN_INT, ioaddr + INTERRUPT);
1601 if (status & IM_EPH_INT)
1602 smc_eph_irq(dev);
1603 } while (--bogus_cnt);
1605 DEBUG(3, " Restoring saved registers mask %2.2x bank %4.4x"
1606 " pointer %4.4x.\n", mask, saved_bank, saved_pointer);
1608 /* restore state register */
1609 outw((mask<<8), ioaddr + INTERRUPT);
1610 outw(saved_pointer, ioaddr + POINTER);
1611 SMC_SELECT_BANK(saved_bank);
1613 DEBUG(3, "%s: Exiting interrupt IRQ%d.\n", dev->name, irq);
1615 irq_done:
1617 if ((smc->manfid == MANFID_OSITECH) &&
1618 (smc->cardid != PRODID_OSITECH_SEVEN)) {
1619 /* Retrigger interrupt if needed */
1620 mask_bits(0x00ff, ioaddr-0x10+OSITECH_RESET_ISR);
1621 set_bits(0x0300, ioaddr-0x10+OSITECH_RESET_ISR);
1623 if (smc->manfid == MANFID_MOTOROLA) {
1624 u_char cor;
1625 cor = readb(smc->base + MOT_UART + CISREG_COR);
1626 writeb(cor & ~COR_IREQ_ENA, smc->base + MOT_UART + CISREG_COR);
1627 writeb(cor, smc->base + MOT_UART + CISREG_COR);
1628 cor = readb(smc->base + MOT_LAN + CISREG_COR);
1629 writeb(cor & ~COR_IREQ_ENA, smc->base + MOT_LAN + CISREG_COR);
1630 writeb(cor, smc->base + MOT_LAN + CISREG_COR);
1632 #ifdef DOES_NOT_WORK
1633 if (smc->base != NULL) { /* Megahertz MFC's */
1634 readb(smc->base+MEGAHERTZ_ISR);
1635 readb(smc->base+MEGAHERTZ_ISR);
1637 #endif
1638 spin_unlock(&smc->lock);
1639 return IRQ_RETVAL(handled);
1642 /*====================================================================*/
1644 static void smc_rx(struct net_device *dev)
1646 unsigned int ioaddr = dev->base_addr;
1647 int rx_status;
1648 int packet_length; /* Caution: not frame length, rather words
1649 to transfer from the chip. */
1651 /* Assertion: we are in Window 2. */
1653 if (inw(ioaddr + FIFO_PORTS) & FP_RXEMPTY) {
1654 printk(KERN_ERR "%s: smc_rx() with nothing on Rx FIFO.\n",
1655 dev->name);
1656 return;
1659 /* Reset the read pointer, and read the status and packet length. */
1660 outw(PTR_READ | PTR_RCV | PTR_AUTOINC, ioaddr + POINTER);
1661 rx_status = inw(ioaddr + DATA_1);
1662 packet_length = inw(ioaddr + DATA_1) & 0x07ff;
1664 DEBUG(2, "%s: Receive status %4.4x length %d.\n",
1665 dev->name, rx_status, packet_length);
1667 if (!(rx_status & RS_ERRORS)) {
1668 /* do stuff to make a new packet */
1669 struct sk_buff *skb;
1671 /* Note: packet_length adds 5 or 6 extra bytes here! */
1672 skb = dev_alloc_skb(packet_length+2);
1674 if (skb == NULL) {
1675 DEBUG(1, "%s: Low memory, packet dropped.\n", dev->name);
1676 dev->stats.rx_dropped++;
1677 outw(MC_RELEASE, ioaddr + MMU_CMD);
1678 return;
1681 packet_length -= (rx_status & RS_ODDFRAME ? 5 : 6);
1682 skb_reserve(skb, 2);
1683 insw(ioaddr+DATA_1, skb_put(skb, packet_length),
1684 (packet_length+1)>>1);
1685 skb->protocol = eth_type_trans(skb, dev);
1687 netif_rx(skb);
1688 dev->last_rx = jiffies;
1689 dev->stats.rx_packets++;
1690 dev->stats.rx_bytes += packet_length;
1691 if (rx_status & RS_MULTICAST)
1692 dev->stats.multicast++;
1693 } else {
1694 /* error ... */
1695 dev->stats.rx_errors++;
1697 if (rx_status & RS_ALGNERR) dev->stats.rx_frame_errors++;
1698 if (rx_status & (RS_TOOSHORT | RS_TOOLONG))
1699 dev->stats.rx_length_errors++;
1700 if (rx_status & RS_BADCRC) dev->stats.rx_crc_errors++;
1702 /* Let the MMU free the memory of this packet. */
1703 outw(MC_RELEASE, ioaddr + MMU_CMD);
1705 return;
1708 /*======================================================================
1710 Calculate values for the hardware multicast filter hash table.
1712 ======================================================================*/
1714 static void fill_multicast_tbl(int count, struct dev_mc_list *addrs,
1715 u_char *multicast_table)
1717 struct dev_mc_list *mc_addr;
1719 for (mc_addr = addrs; mc_addr && count-- > 0; mc_addr = mc_addr->next) {
1720 u_int position = ether_crc(6, mc_addr->dmi_addr);
1721 #ifndef final_version /* Verify multicast address. */
1722 if ((mc_addr->dmi_addr[0] & 1) == 0)
1723 continue;
1724 #endif
1725 multicast_table[position >> 29] |= 1 << ((position >> 26) & 7);
1729 /*======================================================================
1731 Set the receive mode.
1733 This routine is used by both the protocol level to notify us of
1734 promiscuous/multicast mode changes, and by the open/reset code to
1735 initialize the Rx registers. We always set the multicast list and
1736 leave the receiver running.
1738 ======================================================================*/
1740 static void set_rx_mode(struct net_device *dev)
1742 unsigned int ioaddr = dev->base_addr;
1743 struct smc_private *smc = netdev_priv(dev);
1744 u_int multicast_table[ 2 ] = { 0, };
1745 unsigned long flags;
1746 u_short rx_cfg_setting;
1748 if (dev->flags & IFF_PROMISC) {
1749 rx_cfg_setting = RxStripCRC | RxEnable | RxPromisc | RxAllMulti;
1750 } else if (dev->flags & IFF_ALLMULTI)
1751 rx_cfg_setting = RxStripCRC | RxEnable | RxAllMulti;
1752 else {
1753 if (dev->mc_count) {
1754 fill_multicast_tbl(dev->mc_count, dev->mc_list,
1755 (u_char *)multicast_table);
1757 rx_cfg_setting = RxStripCRC | RxEnable;
1760 /* Load MC table and Rx setting into the chip without interrupts. */
1761 spin_lock_irqsave(&smc->lock, flags);
1762 SMC_SELECT_BANK(3);
1763 outl(multicast_table[0], ioaddr + MULTICAST0);
1764 outl(multicast_table[1], ioaddr + MULTICAST4);
1765 SMC_SELECT_BANK(0);
1766 outw(rx_cfg_setting, ioaddr + RCR);
1767 SMC_SELECT_BANK(2);
1768 spin_unlock_irqrestore(&smc->lock, flags);
1770 return;
1773 /*======================================================================
1775 Senses when a card's config changes. Here, it's coax or TP.
1777 ======================================================================*/
1779 static int s9k_config(struct net_device *dev, struct ifmap *map)
1781 struct smc_private *smc = netdev_priv(dev);
1782 if ((map->port != (u_char)(-1)) && (map->port != dev->if_port)) {
1783 if (smc->cfg & CFG_MII_SELECT)
1784 return -EOPNOTSUPP;
1785 else if (map->port > 2)
1786 return -EINVAL;
1787 dev->if_port = map->port;
1788 printk(KERN_INFO "%s: switched to %s port\n",
1789 dev->name, if_names[dev->if_port]);
1790 smc_reset(dev);
1792 return 0;
1795 /*======================================================================
1797 Reset the chip, reloading every register that might be corrupted.
1799 ======================================================================*/
1802 Set transceiver type, perhaps to something other than what the user
1803 specified in dev->if_port.
1805 static void smc_set_xcvr(struct net_device *dev, int if_port)
1807 struct smc_private *smc = netdev_priv(dev);
1808 unsigned int ioaddr = dev->base_addr;
1809 u_short saved_bank;
1811 saved_bank = inw(ioaddr + BANK_SELECT);
1812 SMC_SELECT_BANK(1);
1813 if (if_port == 2) {
1814 outw(smc->cfg | CFG_AUI_SELECT, ioaddr + CONFIG);
1815 if ((smc->manfid == MANFID_OSITECH) &&
1816 (smc->cardid != PRODID_OSITECH_SEVEN))
1817 set_bits(OSI_AUI_PWR, ioaddr - 0x10 + OSITECH_AUI_PWR);
1818 smc->media_status = ((dev->if_port == 0) ? 0x0001 : 0x0002);
1819 } else {
1820 outw(smc->cfg, ioaddr + CONFIG);
1821 if ((smc->manfid == MANFID_OSITECH) &&
1822 (smc->cardid != PRODID_OSITECH_SEVEN))
1823 mask_bits(~OSI_AUI_PWR, ioaddr - 0x10 + OSITECH_AUI_PWR);
1824 smc->media_status = ((dev->if_port == 0) ? 0x0012 : 0x4001);
1826 SMC_SELECT_BANK(saved_bank);
1829 static void smc_reset(struct net_device *dev)
1831 unsigned int ioaddr = dev->base_addr;
1832 struct smc_private *smc = netdev_priv(dev);
1833 int i;
1835 DEBUG(0, "%s: smc91c92 reset called.\n", dev->name);
1837 /* The first interaction must be a write to bring the chip out
1838 of sleep mode. */
1839 SMC_SELECT_BANK(0);
1840 /* Reset the chip. */
1841 outw(RCR_SOFTRESET, ioaddr + RCR);
1842 udelay(10);
1844 /* Clear the transmit and receive configuration registers. */
1845 outw(RCR_CLEAR, ioaddr + RCR);
1846 outw(TCR_CLEAR, ioaddr + TCR);
1848 /* Set the Window 1 control, configuration and station addr registers.
1849 No point in writing the I/O base register ;-> */
1850 SMC_SELECT_BANK(1);
1851 /* Automatically release successfully transmitted packets,
1852 Accept link errors, counter and Tx error interrupts. */
1853 outw(CTL_AUTO_RELEASE | CTL_TE_ENABLE | CTL_CR_ENABLE,
1854 ioaddr + CONTROL);
1855 smc_set_xcvr(dev, dev->if_port);
1856 if ((smc->manfid == MANFID_OSITECH) &&
1857 (smc->cardid != PRODID_OSITECH_SEVEN))
1858 outw((dev->if_port == 2 ? OSI_AUI_PWR : 0) |
1859 (inw(ioaddr-0x10+OSITECH_AUI_PWR) & 0xff00),
1860 ioaddr - 0x10 + OSITECH_AUI_PWR);
1862 /* Fill in the physical address. The databook is wrong about the order! */
1863 for (i = 0; i < 6; i += 2)
1864 outw((dev->dev_addr[i+1]<<8)+dev->dev_addr[i],
1865 ioaddr + ADDR0 + i);
1867 /* Reset the MMU */
1868 SMC_SELECT_BANK(2);
1869 outw(MC_RESET, ioaddr + MMU_CMD);
1870 outw(0, ioaddr + INTERRUPT);
1872 /* Re-enable the chip. */
1873 SMC_SELECT_BANK(0);
1874 outw(((smc->cfg & CFG_MII_SELECT) ? 0 : TCR_MONCSN) |
1875 TCR_ENABLE | TCR_PAD_EN | smc->duplex, ioaddr + TCR);
1876 set_rx_mode(dev);
1878 if (smc->cfg & CFG_MII_SELECT) {
1879 SMC_SELECT_BANK(3);
1881 /* Reset MII */
1882 mdio_write(dev, smc->mii_if.phy_id, 0, 0x8000);
1884 /* Advertise 100F, 100H, 10F, 10H */
1885 mdio_write(dev, smc->mii_if.phy_id, 4, 0x01e1);
1887 /* Restart MII autonegotiation */
1888 mdio_write(dev, smc->mii_if.phy_id, 0, 0x0000);
1889 mdio_write(dev, smc->mii_if.phy_id, 0, 0x1200);
1892 /* Enable interrupts. */
1893 SMC_SELECT_BANK(2);
1894 outw((IM_EPH_INT | IM_RX_OVRN_INT | IM_RCV_INT) << 8,
1895 ioaddr + INTERRUPT);
1898 /*======================================================================
1900 Media selection timer routine
1902 ======================================================================*/
1904 static void media_check(u_long arg)
1906 struct net_device *dev = (struct net_device *) arg;
1907 struct smc_private *smc = netdev_priv(dev);
1908 unsigned int ioaddr = dev->base_addr;
1909 u_short i, media, saved_bank;
1910 u_short link;
1911 unsigned long flags;
1913 spin_lock_irqsave(&smc->lock, flags);
1915 saved_bank = inw(ioaddr + BANK_SELECT);
1917 if (!netif_device_present(dev))
1918 goto reschedule;
1920 SMC_SELECT_BANK(2);
1922 /* need MC_RESET to keep the memory consistent. errata? */
1923 if (smc->rx_ovrn) {
1924 outw(MC_RESET, ioaddr + MMU_CMD);
1925 smc->rx_ovrn = 0;
1927 i = inw(ioaddr + INTERRUPT);
1928 SMC_SELECT_BANK(0);
1929 media = inw(ioaddr + EPH) & EPH_LINK_OK;
1930 SMC_SELECT_BANK(1);
1931 media |= (inw(ioaddr + CONFIG) & CFG_AUI_SELECT) ? 2 : 1;
1933 /* Check for pending interrupt with watchdog flag set: with
1934 this, we can limp along even if the interrupt is blocked */
1935 if (smc->watchdog++ && ((i>>8) & i)) {
1936 if (!smc->fast_poll)
1937 printk(KERN_INFO "%s: interrupt(s) dropped!\n", dev->name);
1938 smc_interrupt(dev->irq, dev);
1939 smc->fast_poll = HZ;
1941 if (smc->fast_poll) {
1942 smc->fast_poll--;
1943 smc->media.expires = jiffies + HZ/100;
1944 add_timer(&smc->media);
1945 SMC_SELECT_BANK(saved_bank);
1946 spin_unlock_irqrestore(&smc->lock, flags);
1947 return;
1950 if (smc->cfg & CFG_MII_SELECT) {
1951 if (smc->mii_if.phy_id < 0)
1952 goto reschedule;
1954 SMC_SELECT_BANK(3);
1955 link = mdio_read(dev, smc->mii_if.phy_id, 1);
1956 if (!link || (link == 0xffff)) {
1957 printk(KERN_INFO "%s: MII is missing!\n", dev->name);
1958 smc->mii_if.phy_id = -1;
1959 goto reschedule;
1962 link &= 0x0004;
1963 if (link != smc->link_status) {
1964 u_short p = mdio_read(dev, smc->mii_if.phy_id, 5);
1965 printk(KERN_INFO "%s: %s link beat\n", dev->name,
1966 (link) ? "found" : "lost");
1967 smc->duplex = (((p & 0x0100) || ((p & 0x1c0) == 0x40))
1968 ? TCR_FDUPLX : 0);
1969 if (link) {
1970 printk(KERN_INFO "%s: autonegotiation complete: "
1971 "%sbaseT-%cD selected\n", dev->name,
1972 ((p & 0x0180) ? "100" : "10"),
1973 (smc->duplex ? 'F' : 'H'));
1975 SMC_SELECT_BANK(0);
1976 outw(inw(ioaddr + TCR) | smc->duplex, ioaddr + TCR);
1977 smc->link_status = link;
1979 goto reschedule;
1982 /* Ignore collisions unless we've had no rx's recently */
1983 if (time_after(jiffies, dev->last_rx + HZ)) {
1984 if (smc->tx_err || (smc->media_status & EPH_16COL))
1985 media |= EPH_16COL;
1987 smc->tx_err = 0;
1989 if (media != smc->media_status) {
1990 if ((media & smc->media_status & 1) &&
1991 ((smc->media_status ^ media) & EPH_LINK_OK))
1992 printk(KERN_INFO "%s: %s link beat\n", dev->name,
1993 (smc->media_status & EPH_LINK_OK ? "lost" : "found"));
1994 else if ((media & smc->media_status & 2) &&
1995 ((smc->media_status ^ media) & EPH_16COL))
1996 printk(KERN_INFO "%s: coax cable %s\n", dev->name,
1997 (media & EPH_16COL ? "problem" : "ok"));
1998 if (dev->if_port == 0) {
1999 if (media & 1) {
2000 if (media & EPH_LINK_OK)
2001 printk(KERN_INFO "%s: flipped to 10baseT\n",
2002 dev->name);
2003 else
2004 smc_set_xcvr(dev, 2);
2005 } else {
2006 if (media & EPH_16COL)
2007 smc_set_xcvr(dev, 1);
2008 else
2009 printk(KERN_INFO "%s: flipped to 10base2\n",
2010 dev->name);
2013 smc->media_status = media;
2016 reschedule:
2017 smc->media.expires = jiffies + HZ;
2018 add_timer(&smc->media);
2019 SMC_SELECT_BANK(saved_bank);
2020 spin_unlock_irqrestore(&smc->lock, flags);
2023 static int smc_link_ok(struct net_device *dev)
2025 unsigned int ioaddr = dev->base_addr;
2026 struct smc_private *smc = netdev_priv(dev);
2028 if (smc->cfg & CFG_MII_SELECT) {
2029 return mii_link_ok(&smc->mii_if);
2030 } else {
2031 SMC_SELECT_BANK(0);
2032 return inw(ioaddr + EPH) & EPH_LINK_OK;
2036 static int smc_netdev_get_ecmd(struct net_device *dev, struct ethtool_cmd *ecmd)
2038 u16 tmp;
2039 unsigned int ioaddr = dev->base_addr;
2041 ecmd->supported = (SUPPORTED_TP | SUPPORTED_AUI |
2042 SUPPORTED_10baseT_Half | SUPPORTED_10baseT_Full);
2044 SMC_SELECT_BANK(1);
2045 tmp = inw(ioaddr + CONFIG);
2046 ecmd->port = (tmp & CFG_AUI_SELECT) ? PORT_AUI : PORT_TP;
2047 ecmd->transceiver = XCVR_INTERNAL;
2048 ecmd->speed = SPEED_10;
2049 ecmd->phy_address = ioaddr + MGMT;
2051 SMC_SELECT_BANK(0);
2052 tmp = inw(ioaddr + TCR);
2053 ecmd->duplex = (tmp & TCR_FDUPLX) ? DUPLEX_FULL : DUPLEX_HALF;
2055 return 0;
2058 static int smc_netdev_set_ecmd(struct net_device *dev, struct ethtool_cmd *ecmd)
2060 u16 tmp;
2061 unsigned int ioaddr = dev->base_addr;
2063 if (ecmd->speed != SPEED_10)
2064 return -EINVAL;
2065 if (ecmd->duplex != DUPLEX_HALF && ecmd->duplex != DUPLEX_FULL)
2066 return -EINVAL;
2067 if (ecmd->port != PORT_TP && ecmd->port != PORT_AUI)
2068 return -EINVAL;
2069 if (ecmd->transceiver != XCVR_INTERNAL)
2070 return -EINVAL;
2072 if (ecmd->port == PORT_AUI)
2073 smc_set_xcvr(dev, 1);
2074 else
2075 smc_set_xcvr(dev, 0);
2077 SMC_SELECT_BANK(0);
2078 tmp = inw(ioaddr + TCR);
2079 if (ecmd->duplex == DUPLEX_FULL)
2080 tmp |= TCR_FDUPLX;
2081 else
2082 tmp &= ~TCR_FDUPLX;
2083 outw(tmp, ioaddr + TCR);
2085 return 0;
2088 static int check_if_running(struct net_device *dev)
2090 if (!netif_running(dev))
2091 return -EINVAL;
2092 return 0;
2095 static void smc_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info)
2097 strcpy(info->driver, DRV_NAME);
2098 strcpy(info->version, DRV_VERSION);
2101 static int smc_get_settings(struct net_device *dev, struct ethtool_cmd *ecmd)
2103 struct smc_private *smc = netdev_priv(dev);
2104 unsigned int ioaddr = dev->base_addr;
2105 u16 saved_bank = inw(ioaddr + BANK_SELECT);
2106 int ret;
2108 spin_lock_irq(&smc->lock);
2109 SMC_SELECT_BANK(3);
2110 if (smc->cfg & CFG_MII_SELECT)
2111 ret = mii_ethtool_gset(&smc->mii_if, ecmd);
2112 else
2113 ret = smc_netdev_get_ecmd(dev, ecmd);
2114 SMC_SELECT_BANK(saved_bank);
2115 spin_unlock_irq(&smc->lock);
2116 return ret;
2119 static int smc_set_settings(struct net_device *dev, struct ethtool_cmd *ecmd)
2121 struct smc_private *smc = netdev_priv(dev);
2122 unsigned int ioaddr = dev->base_addr;
2123 u16 saved_bank = inw(ioaddr + BANK_SELECT);
2124 int ret;
2126 spin_lock_irq(&smc->lock);
2127 SMC_SELECT_BANK(3);
2128 if (smc->cfg & CFG_MII_SELECT)
2129 ret = mii_ethtool_sset(&smc->mii_if, ecmd);
2130 else
2131 ret = smc_netdev_set_ecmd(dev, ecmd);
2132 SMC_SELECT_BANK(saved_bank);
2133 spin_unlock_irq(&smc->lock);
2134 return ret;
2137 static u32 smc_get_link(struct net_device *dev)
2139 struct smc_private *smc = netdev_priv(dev);
2140 unsigned int ioaddr = dev->base_addr;
2141 u16 saved_bank = inw(ioaddr + BANK_SELECT);
2142 u32 ret;
2144 spin_lock_irq(&smc->lock);
2145 SMC_SELECT_BANK(3);
2146 ret = smc_link_ok(dev);
2147 SMC_SELECT_BANK(saved_bank);
2148 spin_unlock_irq(&smc->lock);
2149 return ret;
2152 #ifdef PCMCIA_DEBUG
2153 static u32 smc_get_msglevel(struct net_device *dev)
2155 return pc_debug;
2158 static void smc_set_msglevel(struct net_device *dev, u32 val)
2160 pc_debug = val;
2162 #endif
2164 static int smc_nway_reset(struct net_device *dev)
2166 struct smc_private *smc = netdev_priv(dev);
2167 if (smc->cfg & CFG_MII_SELECT) {
2168 unsigned int ioaddr = dev->base_addr;
2169 u16 saved_bank = inw(ioaddr + BANK_SELECT);
2170 int res;
2172 SMC_SELECT_BANK(3);
2173 res = mii_nway_restart(&smc->mii_if);
2174 SMC_SELECT_BANK(saved_bank);
2176 return res;
2177 } else
2178 return -EOPNOTSUPP;
2181 static const struct ethtool_ops ethtool_ops = {
2182 .begin = check_if_running,
2183 .get_drvinfo = smc_get_drvinfo,
2184 .get_settings = smc_get_settings,
2185 .set_settings = smc_set_settings,
2186 .get_link = smc_get_link,
2187 #ifdef PCMCIA_DEBUG
2188 .get_msglevel = smc_get_msglevel,
2189 .set_msglevel = smc_set_msglevel,
2190 #endif
2191 .nway_reset = smc_nway_reset,
2194 static int smc_ioctl (struct net_device *dev, struct ifreq *rq, int cmd)
2196 struct smc_private *smc = netdev_priv(dev);
2197 struct mii_ioctl_data *mii = if_mii(rq);
2198 int rc = 0;
2199 u16 saved_bank;
2200 unsigned int ioaddr = dev->base_addr;
2202 if (!netif_running(dev))
2203 return -EINVAL;
2205 spin_lock_irq(&smc->lock);
2206 saved_bank = inw(ioaddr + BANK_SELECT);
2207 SMC_SELECT_BANK(3);
2208 rc = generic_mii_ioctl(&smc->mii_if, mii, cmd, NULL);
2209 SMC_SELECT_BANK(saved_bank);
2210 spin_unlock_irq(&smc->lock);
2211 return rc;
2214 static struct pcmcia_device_id smc91c92_ids[] = {
2215 PCMCIA_PFC_DEVICE_MANF_CARD(0, 0x0109, 0x0501),
2216 PCMCIA_PFC_DEVICE_MANF_CARD(0, 0x0140, 0x000a),
2217 PCMCIA_PFC_DEVICE_PROD_ID123(0, "MEGAHERTZ", "CC/XJEM3288", "DATA/FAX/CELL ETHERNET MODEM", 0xf510db04, 0x04cd2988, 0x46a52d63),
2218 PCMCIA_PFC_DEVICE_PROD_ID123(0, "MEGAHERTZ", "CC/XJEM3336", "DATA/FAX/CELL ETHERNET MODEM", 0xf510db04, 0x0143b773, 0x46a52d63),
2219 PCMCIA_PFC_DEVICE_PROD_ID123(0, "MEGAHERTZ", "EM1144T", "PCMCIA MODEM", 0xf510db04, 0x856d66c8, 0xbd6c43ef),
2220 PCMCIA_PFC_DEVICE_PROD_ID123(0, "MEGAHERTZ", "XJEM1144/CCEM1144", "PCMCIA MODEM", 0xf510db04, 0x52d21e1e, 0xbd6c43ef),
2221 PCMCIA_PFC_DEVICE_PROD_ID12(0, "Gateway 2000", "XJEM3336", 0xdd9989be, 0x662c394c),
2222 PCMCIA_PFC_DEVICE_PROD_ID12(0, "MEGAHERTZ", "XJEM1144/CCEM1144", 0xf510db04, 0x52d21e1e),
2223 PCMCIA_PFC_DEVICE_PROD_ID12(0, "Ositech", "Trumpcard:Jack of Diamonds Modem+Ethernet", 0xc2f80cd, 0x656947b9),
2224 PCMCIA_PFC_DEVICE_PROD_ID12(0, "Ositech", "Trumpcard:Jack of Hearts Modem+Ethernet", 0xc2f80cd, 0xdc9ba5ed),
2225 PCMCIA_MFC_DEVICE_MANF_CARD(0, 0x016c, 0x0020),
2226 PCMCIA_DEVICE_MANF_CARD(0x016c, 0x0023),
2227 PCMCIA_DEVICE_PROD_ID123("BASICS by New Media Corporation", "Ethernet", "SMC91C94", 0x23c78a9d, 0x00b2e941, 0xcef397fb),
2228 PCMCIA_DEVICE_PROD_ID12("ARGOSY", "Fast Ethernet PCCard", 0x78f308dc, 0xdcea68bc),
2229 PCMCIA_DEVICE_PROD_ID12("dit Co., Ltd.", "PC Card-10/100BTX", 0xe59365c8, 0x6a2161d1),
2230 PCMCIA_DEVICE_PROD_ID12("DYNALINK", "L100C", 0x6a26d1cf, 0xc16ce9c5),
2231 PCMCIA_DEVICE_PROD_ID12("Farallon", "Farallon Enet", 0x58d93fc4, 0x244734e9),
2232 PCMCIA_DEVICE_PROD_ID12("Megahertz", "CC10BT/2", 0x33234748, 0x3c95b953),
2233 PCMCIA_DEVICE_PROD_ID12("MELCO/SMC", "LPC-TX", 0xa2cd8e6d, 0x42da662a),
2234 PCMCIA_DEVICE_PROD_ID12("Ositech", "Trumpcard:Four of Diamonds Ethernet", 0xc2f80cd, 0xb3466314),
2235 PCMCIA_DEVICE_PROD_ID12("Ositech", "Trumpcard:Seven of Diamonds Ethernet", 0xc2f80cd, 0x194b650a),
2236 PCMCIA_DEVICE_PROD_ID12("PCMCIA", "Fast Ethernet PCCard", 0x281f1c5d, 0xdcea68bc),
2237 PCMCIA_DEVICE_PROD_ID12("Psion", "10Mb Ethernet", 0x4ef00b21, 0x844be9e9),
2238 PCMCIA_DEVICE_PROD_ID12("SMC", "EtherEZ Ethernet 8020", 0xc4f8b18b, 0x4a0eeb2d),
2239 /* These conflict with other cards! */
2240 /* PCMCIA_DEVICE_MANF_CARD(0x0186, 0x0100), */
2241 /* PCMCIA_DEVICE_MANF_CARD(0x8a01, 0xc1ab), */
2242 PCMCIA_DEVICE_NULL,
2244 MODULE_DEVICE_TABLE(pcmcia, smc91c92_ids);
2246 static struct pcmcia_driver smc91c92_cs_driver = {
2247 .owner = THIS_MODULE,
2248 .drv = {
2249 .name = "smc91c92_cs",
2251 .probe = smc91c92_probe,
2252 .remove = smc91c92_detach,
2253 .id_table = smc91c92_ids,
2254 .suspend = smc91c92_suspend,
2255 .resume = smc91c92_resume,
2258 static int __init init_smc91c92_cs(void)
2260 return pcmcia_register_driver(&smc91c92_cs_driver);
2263 static void __exit exit_smc91c92_cs(void)
2265 pcmcia_unregister_driver(&smc91c92_cs_driver);
2268 module_init(init_smc91c92_cs);
2269 module_exit(exit_smc91c92_cs);