Full support for Ginger Console
[linux-ginger.git] / drivers / usb / host / ohci-pnx4008.c
blob100bf3d8437c12e7e1d68e090759c79c355aa5cb
1 /*
2 * drivers/usb/host/ohci-pnx4008.c
4 * driver for Philips PNX4008 USB Host
6 * Authors: Dmitry Chigirev <source@mvista.com>
7 * Vitaly Wool <vitalywool@gmail.com>
9 * register initialization is based on code examples provided by Philips
10 * Copyright (c) 2005 Koninklijke Philips Electronics N.V.
12 * NOTE: This driver does not have suspend/resume functionality
13 * This driver is intended for engineering development purposes only
15 * 2005-2006 (c) MontaVista Software, Inc. This file is licensed under
16 * the terms of the GNU General Public License version 2. This program
17 * is licensed "as is" without any warranty of any kind, whether express
18 * or implied.
20 #include <linux/clk.h>
21 #include <linux/platform_device.h>
22 #include <linux/i2c.h>
24 #include <mach/hardware.h>
25 #include <asm/io.h>
27 #include <mach/platform.h>
28 #include <mach/irqs.h>
29 #include <mach/gpio.h>
31 #define USB_CTRL IO_ADDRESS(PNX4008_PWRMAN_BASE + 0x64)
33 /* USB_CTRL bit defines */
34 #define USB_SLAVE_HCLK_EN (1 << 24)
35 #define USB_HOST_NEED_CLK_EN (1 << 21)
37 #define USB_OTG_CLK_CTRL IO_ADDRESS(PNX4008_USB_CONFIG_BASE + 0xFF4)
38 #define USB_OTG_CLK_STAT IO_ADDRESS(PNX4008_USB_CONFIG_BASE + 0xFF8)
40 /* USB_OTG_CLK_CTRL bit defines */
41 #define AHB_M_CLOCK_ON (1 << 4)
42 #define OTG_CLOCK_ON (1 << 3)
43 #define I2C_CLOCK_ON (1 << 2)
44 #define DEV_CLOCK_ON (1 << 1)
45 #define HOST_CLOCK_ON (1 << 0)
47 #define USB_OTG_STAT_CONTROL IO_ADDRESS(PNX4008_USB_CONFIG_BASE + 0x110)
49 /* USB_OTG_STAT_CONTROL bit defines */
50 #define TRANSPARENT_I2C_EN (1 << 7)
51 #define HOST_EN (1 << 0)
53 /* ISP1301 USB transceiver I2C registers */
54 #define ISP1301_MODE_CONTROL_1 0x04 /* u8 read, set, +1 clear */
56 #define MC1_SPEED_REG (1 << 0)
57 #define MC1_SUSPEND_REG (1 << 1)
58 #define MC1_DAT_SE0 (1 << 2)
59 #define MC1_TRANSPARENT (1 << 3)
60 #define MC1_BDIS_ACON_EN (1 << 4)
61 #define MC1_OE_INT_EN (1 << 5)
62 #define MC1_UART_EN (1 << 6)
63 #define MC1_MASK 0x7f
65 #define ISP1301_MODE_CONTROL_2 0x12 /* u8 read, set, +1 clear */
67 #define MC2_GLOBAL_PWR_DN (1 << 0)
68 #define MC2_SPD_SUSP_CTRL (1 << 1)
69 #define MC2_BI_DI (1 << 2)
70 #define MC2_TRANSP_BDIR0 (1 << 3)
71 #define MC2_TRANSP_BDIR1 (1 << 4)
72 #define MC2_AUDIO_EN (1 << 5)
73 #define MC2_PSW_EN (1 << 6)
74 #define MC2_EN2V7 (1 << 7)
76 #define ISP1301_OTG_CONTROL_1 0x06 /* u8 read, set, +1 clear */
77 # define OTG1_DP_PULLUP (1 << 0)
78 # define OTG1_DM_PULLUP (1 << 1)
79 # define OTG1_DP_PULLDOWN (1 << 2)
80 # define OTG1_DM_PULLDOWN (1 << 3)
81 # define OTG1_ID_PULLDOWN (1 << 4)
82 # define OTG1_VBUS_DRV (1 << 5)
83 # define OTG1_VBUS_DISCHRG (1 << 6)
84 # define OTG1_VBUS_CHRG (1 << 7)
85 #define ISP1301_OTG_STATUS 0x10 /* u8 readonly */
86 # define OTG_B_SESS_END (1 << 6)
87 # define OTG_B_SESS_VLD (1 << 7)
89 #define ISP1301_I2C_ADDR 0x2C
91 #define ISP1301_I2C_MODE_CONTROL_1 0x4
92 #define ISP1301_I2C_MODE_CONTROL_2 0x12
93 #define ISP1301_I2C_OTG_CONTROL_1 0x6
94 #define ISP1301_I2C_OTG_CONTROL_2 0x10
95 #define ISP1301_I2C_INTERRUPT_SOURCE 0x8
96 #define ISP1301_I2C_INTERRUPT_LATCH 0xA
97 #define ISP1301_I2C_INTERRUPT_FALLING 0xC
98 #define ISP1301_I2C_INTERRUPT_RISING 0xE
99 #define ISP1301_I2C_REG_CLEAR_ADDR 1
101 struct i2c_driver isp1301_driver;
102 struct i2c_client *isp1301_i2c_client;
104 extern int usb_disabled(void);
105 extern int ocpi_enable(void);
107 static struct clk *usb_clk;
109 static const unsigned short normal_i2c[] =
110 { ISP1301_I2C_ADDR, ISP1301_I2C_ADDR + 1, I2C_CLIENT_END };
112 static int isp1301_probe(struct i2c_client *client,
113 const struct i2c_device_id *id)
115 return 0;
118 static int isp1301_remove(struct i2c_client *client)
120 return 0;
123 const struct i2c_device_id isp1301_id[] = {
124 { "isp1301_pnx", 0 },
128 struct i2c_driver isp1301_driver = {
129 .driver = {
130 .name = "isp1301_pnx",
132 .probe = isp1301_probe,
133 .remove = isp1301_remove,
134 .id_table = isp1301_id,
137 static void i2c_write(u8 buf, u8 subaddr)
139 char tmpbuf[2];
141 tmpbuf[0] = subaddr; /*register number */
142 tmpbuf[1] = buf; /*register data */
143 i2c_master_send(isp1301_i2c_client, &tmpbuf[0], 2);
146 static void isp1301_configure(void)
148 /* PNX4008 only supports DAT_SE0 USB mode */
149 /* PNX4008 R2A requires setting the MAX603 to output 3.6V */
150 /* Power up externel charge-pump */
152 i2c_write(MC1_DAT_SE0 | MC1_SPEED_REG, ISP1301_I2C_MODE_CONTROL_1);
153 i2c_write(~(MC1_DAT_SE0 | MC1_SPEED_REG),
154 ISP1301_I2C_MODE_CONTROL_1 | ISP1301_I2C_REG_CLEAR_ADDR);
155 i2c_write(MC2_BI_DI | MC2_PSW_EN | MC2_SPD_SUSP_CTRL,
156 ISP1301_I2C_MODE_CONTROL_2);
157 i2c_write(~(MC2_BI_DI | MC2_PSW_EN | MC2_SPD_SUSP_CTRL),
158 ISP1301_I2C_MODE_CONTROL_2 | ISP1301_I2C_REG_CLEAR_ADDR);
159 i2c_write(OTG1_DM_PULLDOWN | OTG1_DP_PULLDOWN,
160 ISP1301_I2C_OTG_CONTROL_1);
161 i2c_write(~(OTG1_DM_PULLDOWN | OTG1_DP_PULLDOWN),
162 ISP1301_I2C_OTG_CONTROL_1 | ISP1301_I2C_REG_CLEAR_ADDR);
163 i2c_write(0xFF,
164 ISP1301_I2C_INTERRUPT_LATCH | ISP1301_I2C_REG_CLEAR_ADDR);
165 i2c_write(0xFF,
166 ISP1301_I2C_INTERRUPT_FALLING | ISP1301_I2C_REG_CLEAR_ADDR);
167 i2c_write(0xFF,
168 ISP1301_I2C_INTERRUPT_RISING | ISP1301_I2C_REG_CLEAR_ADDR);
172 static inline void isp1301_vbus_on(void)
174 i2c_write(OTG1_VBUS_DRV, ISP1301_I2C_OTG_CONTROL_1);
177 static inline void isp1301_vbus_off(void)
179 i2c_write(OTG1_VBUS_DRV,
180 ISP1301_I2C_OTG_CONTROL_1 | ISP1301_I2C_REG_CLEAR_ADDR);
183 static void pnx4008_start_hc(void)
185 unsigned long tmp = __raw_readl(USB_OTG_STAT_CONTROL) | HOST_EN;
186 __raw_writel(tmp, USB_OTG_STAT_CONTROL);
187 isp1301_vbus_on();
190 static void pnx4008_stop_hc(void)
192 unsigned long tmp;
193 isp1301_vbus_off();
194 tmp = __raw_readl(USB_OTG_STAT_CONTROL) & ~HOST_EN;
195 __raw_writel(tmp, USB_OTG_STAT_CONTROL);
198 static int __devinit ohci_pnx4008_start(struct usb_hcd *hcd)
200 struct ohci_hcd *ohci = hcd_to_ohci(hcd);
201 int ret;
203 if ((ret = ohci_init(ohci)) < 0)
204 return ret;
206 if ((ret = ohci_run(ohci)) < 0) {
207 dev_err(hcd->self.controller, "can't start\n");
208 ohci_stop(hcd);
209 return ret;
211 return 0;
214 static const struct hc_driver ohci_pnx4008_hc_driver = {
215 .description = hcd_name,
216 .product_desc = "pnx4008 OHCI",
219 * generic hardware linkage
221 .irq = ohci_irq,
222 .flags = HCD_USB11 | HCD_MEMORY,
224 .hcd_priv_size = sizeof(struct ohci_hcd),
226 * basic lifecycle operations
228 .start = ohci_pnx4008_start,
229 .stop = ohci_stop,
230 .shutdown = ohci_shutdown,
233 * managing i/o requests and associated device resources
235 .urb_enqueue = ohci_urb_enqueue,
236 .urb_dequeue = ohci_urb_dequeue,
237 .endpoint_disable = ohci_endpoint_disable,
240 * scheduling support
242 .get_frame_number = ohci_get_frame,
245 * root hub support
247 .hub_status_data = ohci_hub_status_data,
248 .hub_control = ohci_hub_control,
249 #ifdef CONFIG_PM
250 .bus_suspend = ohci_bus_suspend,
251 .bus_resume = ohci_bus_resume,
252 #endif
253 .start_port_reset = ohci_start_port_reset,
256 #define USB_CLOCK_MASK (AHB_M_CLOCK_ON| OTG_CLOCK_ON | HOST_CLOCK_ON | I2C_CLOCK_ON)
258 static void pnx4008_set_usb_bits(void)
260 start_int_set_falling_edge(SE_USB_OTG_ATX_INT_N);
261 start_int_ack(SE_USB_OTG_ATX_INT_N);
262 start_int_umask(SE_USB_OTG_ATX_INT_N);
264 start_int_set_rising_edge(SE_USB_OTG_TIMER_INT);
265 start_int_ack(SE_USB_OTG_TIMER_INT);
266 start_int_umask(SE_USB_OTG_TIMER_INT);
268 start_int_set_rising_edge(SE_USB_I2C_INT);
269 start_int_ack(SE_USB_I2C_INT);
270 start_int_umask(SE_USB_I2C_INT);
272 start_int_set_rising_edge(SE_USB_INT);
273 start_int_ack(SE_USB_INT);
274 start_int_umask(SE_USB_INT);
276 start_int_set_rising_edge(SE_USB_NEED_CLK_INT);
277 start_int_ack(SE_USB_NEED_CLK_INT);
278 start_int_umask(SE_USB_NEED_CLK_INT);
280 start_int_set_rising_edge(SE_USB_AHB_NEED_CLK_INT);
281 start_int_ack(SE_USB_AHB_NEED_CLK_INT);
282 start_int_umask(SE_USB_AHB_NEED_CLK_INT);
285 static void pnx4008_unset_usb_bits(void)
287 start_int_mask(SE_USB_OTG_ATX_INT_N);
288 start_int_mask(SE_USB_OTG_TIMER_INT);
289 start_int_mask(SE_USB_I2C_INT);
290 start_int_mask(SE_USB_INT);
291 start_int_mask(SE_USB_NEED_CLK_INT);
292 start_int_mask(SE_USB_AHB_NEED_CLK_INT);
295 static int __devinit usb_hcd_pnx4008_probe(struct platform_device *pdev)
297 struct usb_hcd *hcd = 0;
298 struct ohci_hcd *ohci;
299 const struct hc_driver *driver = &ohci_pnx4008_hc_driver;
300 struct i2c_adapter *i2c_adap;
301 struct i2c_board_info i2c_info;
303 int ret = 0, irq;
305 dev_dbg(&pdev->dev, "%s: " DRIVER_DESC " (pnx4008)\n", hcd_name);
306 if (usb_disabled()) {
307 err("USB is disabled");
308 ret = -ENODEV;
309 goto out;
312 if (pdev->num_resources != 2
313 || pdev->resource[0].flags != IORESOURCE_MEM
314 || pdev->resource[1].flags != IORESOURCE_IRQ) {
315 err("Invalid resource configuration");
316 ret = -ENODEV;
317 goto out;
320 /* Enable AHB slave USB clock, needed for further USB clock control */
321 __raw_writel(USB_SLAVE_HCLK_EN | (1 << 19), USB_CTRL);
323 ret = i2c_add_driver(&isp1301_driver);
324 if (ret < 0) {
325 err("failed to add ISP1301 driver");
326 goto out;
328 i2c_adap = i2c_get_adapter(2);
329 memset(&i2c_info, 0, sizeof(struct i2c_board_info));
330 strlcpy(i2c_info.name, "isp1301_pnx", I2C_NAME_SIZE);
331 isp1301_i2c_client = i2c_new_probed_device(i2c_adap, &i2c_info,
332 normal_i2c);
333 i2c_put_adapter(i2c_adap);
334 if (!isp1301_i2c_client) {
335 err("failed to connect I2C to ISP1301 USB Transceiver");
336 ret = -ENODEV;
337 goto out_i2c_driver;
340 isp1301_configure();
342 /* Enable USB PLL */
343 usb_clk = clk_get(&pdev->dev, "ck_pll5");
344 if (IS_ERR(usb_clk)) {
345 err("failed to acquire USB PLL");
346 ret = PTR_ERR(usb_clk);
347 goto out1;
350 ret = clk_enable(usb_clk);
351 if (ret < 0) {
352 err("failed to start USB PLL");
353 goto out2;
356 ret = clk_set_rate(usb_clk, 48000);
357 if (ret < 0) {
358 err("failed to set USB clock rate");
359 goto out3;
362 __raw_writel(__raw_readl(USB_CTRL) | USB_HOST_NEED_CLK_EN, USB_CTRL);
364 /* Set to enable all needed USB clocks */
365 __raw_writel(USB_CLOCK_MASK, USB_OTG_CLK_CTRL);
367 while ((__raw_readl(USB_OTG_CLK_STAT) & USB_CLOCK_MASK) !=
368 USB_CLOCK_MASK) ;
370 hcd = usb_create_hcd (driver, &pdev->dev, dev_name(&pdev->dev));
371 if (!hcd) {
372 err("Failed to allocate HC buffer");
373 ret = -ENOMEM;
374 goto out3;
377 /* Set all USB bits in the Start Enable register */
378 pnx4008_set_usb_bits();
380 hcd->rsrc_start = pdev->resource[0].start;
381 hcd->rsrc_len = pdev->resource[0].end - pdev->resource[0].start + 1;
382 if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) {
383 dev_dbg(&pdev->dev, "request_mem_region failed\n");
384 ret = -ENOMEM;
385 goto out4;
387 hcd->regs = (void __iomem *)pdev->resource[0].start;
389 irq = platform_get_irq(pdev, 0);
390 if (irq < 0) {
391 ret = -ENXIO;
392 goto out4;
395 pnx4008_start_hc();
396 platform_set_drvdata(pdev, hcd);
397 ohci = hcd_to_ohci(hcd);
398 ohci_hcd_init(ohci);
400 dev_info(&pdev->dev, "at 0x%p, irq %d\n", hcd->regs, hcd->irq);
401 ret = usb_add_hcd(hcd, irq, IRQF_DISABLED);
402 if (ret == 0)
403 return ret;
405 pnx4008_stop_hc();
406 out4:
407 pnx4008_unset_usb_bits();
408 usb_put_hcd(hcd);
409 out3:
410 clk_disable(usb_clk);
411 out2:
412 clk_put(usb_clk);
413 out1:
414 i2c_unregister_client(isp1301_i2c_client);
415 isp1301_i2c_client = NULL;
416 out_i2c_driver:
417 i2c_del_driver(&isp1301_driver);
418 out:
419 return ret;
422 static int usb_hcd_pnx4008_remove(struct platform_device *pdev)
424 struct usb_hcd *hcd = platform_get_drvdata(pdev);
426 usb_remove_hcd(hcd);
427 pnx4008_stop_hc();
428 release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
429 usb_put_hcd(hcd);
430 pnx4008_unset_usb_bits();
431 clk_disable(usb_clk);
432 clk_put(usb_clk);
433 i2c_unregister_client(isp1301_i2c_client);
434 isp1301_i2c_client = NULL;
435 i2c_del_driver(&isp1301_driver);
437 platform_set_drvdata(pdev, NULL);
439 return 0;
442 /* work with hotplug and coldplug */
443 MODULE_ALIAS("platform:usb-ohci");
445 static struct platform_driver usb_hcd_pnx4008_driver = {
446 .driver = {
447 .name = "usb-ohci",
448 .owner = THIS_MODULE,
450 .probe = usb_hcd_pnx4008_probe,
451 .remove = usb_hcd_pnx4008_remove,