Revert "unicode: Don't special case ignorable code points"
[linux.git] / drivers / net / dsa / b53 / b53_common.c
blob285785c942b077f6538de4d762f78354ccbd86ae
1 /*
2 * B53 switch driver main logic
4 * Copyright (C) 2011-2013 Jonas Gorski <jogo@openwrt.org>
5 * Copyright (C) 2016 Florian Fainelli <f.fainelli@gmail.com>
7 * Permission to use, copy, modify, and/or distribute this software for any
8 * purpose with or without fee is hereby granted, provided that the above
9 * copyright notice and this permission notice appear in all copies.
11 * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
12 * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
13 * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
14 * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
15 * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
16 * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
17 * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
20 #include <linux/delay.h>
21 #include <linux/export.h>
22 #include <linux/gpio.h>
23 #include <linux/kernel.h>
24 #include <linux/module.h>
25 #include <linux/platform_data/b53.h>
26 #include <linux/phy.h>
27 #include <linux/phylink.h>
28 #include <linux/etherdevice.h>
29 #include <linux/if_bridge.h>
30 #include <linux/if_vlan.h>
31 #include <net/dsa.h>
33 #include "b53_regs.h"
34 #include "b53_priv.h"
36 struct b53_mib_desc {
37 u8 size;
38 u8 offset;
39 const char *name;
42 /* BCM5365 MIB counters */
43 static const struct b53_mib_desc b53_mibs_65[] = {
44 { 8, 0x00, "TxOctets" },
45 { 4, 0x08, "TxDropPkts" },
46 { 4, 0x10, "TxBroadcastPkts" },
47 { 4, 0x14, "TxMulticastPkts" },
48 { 4, 0x18, "TxUnicastPkts" },
49 { 4, 0x1c, "TxCollisions" },
50 { 4, 0x20, "TxSingleCollision" },
51 { 4, 0x24, "TxMultipleCollision" },
52 { 4, 0x28, "TxDeferredTransmit" },
53 { 4, 0x2c, "TxLateCollision" },
54 { 4, 0x30, "TxExcessiveCollision" },
55 { 4, 0x38, "TxPausePkts" },
56 { 8, 0x44, "RxOctets" },
57 { 4, 0x4c, "RxUndersizePkts" },
58 { 4, 0x50, "RxPausePkts" },
59 { 4, 0x54, "Pkts64Octets" },
60 { 4, 0x58, "Pkts65to127Octets" },
61 { 4, 0x5c, "Pkts128to255Octets" },
62 { 4, 0x60, "Pkts256to511Octets" },
63 { 4, 0x64, "Pkts512to1023Octets" },
64 { 4, 0x68, "Pkts1024to1522Octets" },
65 { 4, 0x6c, "RxOversizePkts" },
66 { 4, 0x70, "RxJabbers" },
67 { 4, 0x74, "RxAlignmentErrors" },
68 { 4, 0x78, "RxFCSErrors" },
69 { 8, 0x7c, "RxGoodOctets" },
70 { 4, 0x84, "RxDropPkts" },
71 { 4, 0x88, "RxUnicastPkts" },
72 { 4, 0x8c, "RxMulticastPkts" },
73 { 4, 0x90, "RxBroadcastPkts" },
74 { 4, 0x94, "RxSAChanges" },
75 { 4, 0x98, "RxFragments" },
78 #define B53_MIBS_65_SIZE ARRAY_SIZE(b53_mibs_65)
80 /* BCM63xx MIB counters */
81 static const struct b53_mib_desc b53_mibs_63xx[] = {
82 { 8, 0x00, "TxOctets" },
83 { 4, 0x08, "TxDropPkts" },
84 { 4, 0x0c, "TxQoSPkts" },
85 { 4, 0x10, "TxBroadcastPkts" },
86 { 4, 0x14, "TxMulticastPkts" },
87 { 4, 0x18, "TxUnicastPkts" },
88 { 4, 0x1c, "TxCollisions" },
89 { 4, 0x20, "TxSingleCollision" },
90 { 4, 0x24, "TxMultipleCollision" },
91 { 4, 0x28, "TxDeferredTransmit" },
92 { 4, 0x2c, "TxLateCollision" },
93 { 4, 0x30, "TxExcessiveCollision" },
94 { 4, 0x38, "TxPausePkts" },
95 { 8, 0x3c, "TxQoSOctets" },
96 { 8, 0x44, "RxOctets" },
97 { 4, 0x4c, "RxUndersizePkts" },
98 { 4, 0x50, "RxPausePkts" },
99 { 4, 0x54, "Pkts64Octets" },
100 { 4, 0x58, "Pkts65to127Octets" },
101 { 4, 0x5c, "Pkts128to255Octets" },
102 { 4, 0x60, "Pkts256to511Octets" },
103 { 4, 0x64, "Pkts512to1023Octets" },
104 { 4, 0x68, "Pkts1024to1522Octets" },
105 { 4, 0x6c, "RxOversizePkts" },
106 { 4, 0x70, "RxJabbers" },
107 { 4, 0x74, "RxAlignmentErrors" },
108 { 4, 0x78, "RxFCSErrors" },
109 { 8, 0x7c, "RxGoodOctets" },
110 { 4, 0x84, "RxDropPkts" },
111 { 4, 0x88, "RxUnicastPkts" },
112 { 4, 0x8c, "RxMulticastPkts" },
113 { 4, 0x90, "RxBroadcastPkts" },
114 { 4, 0x94, "RxSAChanges" },
115 { 4, 0x98, "RxFragments" },
116 { 4, 0xa0, "RxSymbolErrors" },
117 { 4, 0xa4, "RxQoSPkts" },
118 { 8, 0xa8, "RxQoSOctets" },
119 { 4, 0xb0, "Pkts1523to2047Octets" },
120 { 4, 0xb4, "Pkts2048to4095Octets" },
121 { 4, 0xb8, "Pkts4096to8191Octets" },
122 { 4, 0xbc, "Pkts8192to9728Octets" },
123 { 4, 0xc0, "RxDiscarded" },
126 #define B53_MIBS_63XX_SIZE ARRAY_SIZE(b53_mibs_63xx)
128 /* MIB counters */
129 static const struct b53_mib_desc b53_mibs[] = {
130 { 8, 0x00, "TxOctets" },
131 { 4, 0x08, "TxDropPkts" },
132 { 4, 0x10, "TxBroadcastPkts" },
133 { 4, 0x14, "TxMulticastPkts" },
134 { 4, 0x18, "TxUnicastPkts" },
135 { 4, 0x1c, "TxCollisions" },
136 { 4, 0x20, "TxSingleCollision" },
137 { 4, 0x24, "TxMultipleCollision" },
138 { 4, 0x28, "TxDeferredTransmit" },
139 { 4, 0x2c, "TxLateCollision" },
140 { 4, 0x30, "TxExcessiveCollision" },
141 { 4, 0x38, "TxPausePkts" },
142 { 8, 0x50, "RxOctets" },
143 { 4, 0x58, "RxUndersizePkts" },
144 { 4, 0x5c, "RxPausePkts" },
145 { 4, 0x60, "Pkts64Octets" },
146 { 4, 0x64, "Pkts65to127Octets" },
147 { 4, 0x68, "Pkts128to255Octets" },
148 { 4, 0x6c, "Pkts256to511Octets" },
149 { 4, 0x70, "Pkts512to1023Octets" },
150 { 4, 0x74, "Pkts1024to1522Octets" },
151 { 4, 0x78, "RxOversizePkts" },
152 { 4, 0x7c, "RxJabbers" },
153 { 4, 0x80, "RxAlignmentErrors" },
154 { 4, 0x84, "RxFCSErrors" },
155 { 8, 0x88, "RxGoodOctets" },
156 { 4, 0x90, "RxDropPkts" },
157 { 4, 0x94, "RxUnicastPkts" },
158 { 4, 0x98, "RxMulticastPkts" },
159 { 4, 0x9c, "RxBroadcastPkts" },
160 { 4, 0xa0, "RxSAChanges" },
161 { 4, 0xa4, "RxFragments" },
162 { 4, 0xa8, "RxJumboPkts" },
163 { 4, 0xac, "RxSymbolErrors" },
164 { 4, 0xc0, "RxDiscarded" },
167 #define B53_MIBS_SIZE ARRAY_SIZE(b53_mibs)
169 static const struct b53_mib_desc b53_mibs_58xx[] = {
170 { 8, 0x00, "TxOctets" },
171 { 4, 0x08, "TxDropPkts" },
172 { 4, 0x0c, "TxQPKTQ0" },
173 { 4, 0x10, "TxBroadcastPkts" },
174 { 4, 0x14, "TxMulticastPkts" },
175 { 4, 0x18, "TxUnicastPKts" },
176 { 4, 0x1c, "TxCollisions" },
177 { 4, 0x20, "TxSingleCollision" },
178 { 4, 0x24, "TxMultipleCollision" },
179 { 4, 0x28, "TxDeferredCollision" },
180 { 4, 0x2c, "TxLateCollision" },
181 { 4, 0x30, "TxExcessiveCollision" },
182 { 4, 0x34, "TxFrameInDisc" },
183 { 4, 0x38, "TxPausePkts" },
184 { 4, 0x3c, "TxQPKTQ1" },
185 { 4, 0x40, "TxQPKTQ2" },
186 { 4, 0x44, "TxQPKTQ3" },
187 { 4, 0x48, "TxQPKTQ4" },
188 { 4, 0x4c, "TxQPKTQ5" },
189 { 8, 0x50, "RxOctets" },
190 { 4, 0x58, "RxUndersizePkts" },
191 { 4, 0x5c, "RxPausePkts" },
192 { 4, 0x60, "RxPkts64Octets" },
193 { 4, 0x64, "RxPkts65to127Octets" },
194 { 4, 0x68, "RxPkts128to255Octets" },
195 { 4, 0x6c, "RxPkts256to511Octets" },
196 { 4, 0x70, "RxPkts512to1023Octets" },
197 { 4, 0x74, "RxPkts1024toMaxPktsOctets" },
198 { 4, 0x78, "RxOversizePkts" },
199 { 4, 0x7c, "RxJabbers" },
200 { 4, 0x80, "RxAlignmentErrors" },
201 { 4, 0x84, "RxFCSErrors" },
202 { 8, 0x88, "RxGoodOctets" },
203 { 4, 0x90, "RxDropPkts" },
204 { 4, 0x94, "RxUnicastPkts" },
205 { 4, 0x98, "RxMulticastPkts" },
206 { 4, 0x9c, "RxBroadcastPkts" },
207 { 4, 0xa0, "RxSAChanges" },
208 { 4, 0xa4, "RxFragments" },
209 { 4, 0xa8, "RxJumboPkt" },
210 { 4, 0xac, "RxSymblErr" },
211 { 4, 0xb0, "InRangeErrCount" },
212 { 4, 0xb4, "OutRangeErrCount" },
213 { 4, 0xb8, "EEELpiEvent" },
214 { 4, 0xbc, "EEELpiDuration" },
215 { 4, 0xc0, "RxDiscard" },
216 { 4, 0xc8, "TxQPKTQ6" },
217 { 4, 0xcc, "TxQPKTQ7" },
218 { 4, 0xd0, "TxPkts64Octets" },
219 { 4, 0xd4, "TxPkts65to127Octets" },
220 { 4, 0xd8, "TxPkts128to255Octets" },
221 { 4, 0xdc, "TxPkts256to511Ocets" },
222 { 4, 0xe0, "TxPkts512to1023Ocets" },
223 { 4, 0xe4, "TxPkts1024toMaxPktOcets" },
226 #define B53_MIBS_58XX_SIZE ARRAY_SIZE(b53_mibs_58xx)
228 #define B53_MAX_MTU_25 (1536 - ETH_HLEN - VLAN_HLEN - ETH_FCS_LEN)
229 #define B53_MAX_MTU (9720 - ETH_HLEN - VLAN_HLEN - ETH_FCS_LEN)
231 static int b53_do_vlan_op(struct b53_device *dev, u8 op)
233 unsigned int i;
235 b53_write8(dev, B53_ARLIO_PAGE, dev->vta_regs[0], VTA_START_CMD | op);
237 for (i = 0; i < 10; i++) {
238 u8 vta;
240 b53_read8(dev, B53_ARLIO_PAGE, dev->vta_regs[0], &vta);
241 if (!(vta & VTA_START_CMD))
242 return 0;
244 usleep_range(100, 200);
247 return -EIO;
250 static void b53_set_vlan_entry(struct b53_device *dev, u16 vid,
251 struct b53_vlan *vlan)
253 if (is5325(dev)) {
254 u32 entry = 0;
256 if (vlan->members) {
257 entry = ((vlan->untag & VA_UNTAG_MASK_25) <<
258 VA_UNTAG_S_25) | vlan->members;
259 if (dev->core_rev >= 3)
260 entry |= VA_VALID_25_R4 | vid << VA_VID_HIGH_S;
261 else
262 entry |= VA_VALID_25;
265 b53_write32(dev, B53_VLAN_PAGE, B53_VLAN_WRITE_25, entry);
266 b53_write16(dev, B53_VLAN_PAGE, B53_VLAN_TABLE_ACCESS_25, vid |
267 VTA_RW_STATE_WR | VTA_RW_OP_EN);
268 } else if (is5365(dev)) {
269 u16 entry = 0;
271 if (vlan->members)
272 entry = ((vlan->untag & VA_UNTAG_MASK_65) <<
273 VA_UNTAG_S_65) | vlan->members | VA_VALID_65;
275 b53_write16(dev, B53_VLAN_PAGE, B53_VLAN_WRITE_65, entry);
276 b53_write16(dev, B53_VLAN_PAGE, B53_VLAN_TABLE_ACCESS_65, vid |
277 VTA_RW_STATE_WR | VTA_RW_OP_EN);
278 } else {
279 b53_write16(dev, B53_ARLIO_PAGE, dev->vta_regs[1], vid);
280 b53_write32(dev, B53_ARLIO_PAGE, dev->vta_regs[2],
281 (vlan->untag << VTE_UNTAG_S) | vlan->members);
283 b53_do_vlan_op(dev, VTA_CMD_WRITE);
286 dev_dbg(dev->ds->dev, "VID: %d, members: 0x%04x, untag: 0x%04x\n",
287 vid, vlan->members, vlan->untag);
290 static void b53_get_vlan_entry(struct b53_device *dev, u16 vid,
291 struct b53_vlan *vlan)
293 if (is5325(dev)) {
294 u32 entry = 0;
296 b53_write16(dev, B53_VLAN_PAGE, B53_VLAN_TABLE_ACCESS_25, vid |
297 VTA_RW_STATE_RD | VTA_RW_OP_EN);
298 b53_read32(dev, B53_VLAN_PAGE, B53_VLAN_WRITE_25, &entry);
300 if (dev->core_rev >= 3)
301 vlan->valid = !!(entry & VA_VALID_25_R4);
302 else
303 vlan->valid = !!(entry & VA_VALID_25);
304 vlan->members = entry & VA_MEMBER_MASK;
305 vlan->untag = (entry >> VA_UNTAG_S_25) & VA_UNTAG_MASK_25;
307 } else if (is5365(dev)) {
308 u16 entry = 0;
310 b53_write16(dev, B53_VLAN_PAGE, B53_VLAN_TABLE_ACCESS_65, vid |
311 VTA_RW_STATE_WR | VTA_RW_OP_EN);
312 b53_read16(dev, B53_VLAN_PAGE, B53_VLAN_WRITE_65, &entry);
314 vlan->valid = !!(entry & VA_VALID_65);
315 vlan->members = entry & VA_MEMBER_MASK;
316 vlan->untag = (entry >> VA_UNTAG_S_65) & VA_UNTAG_MASK_65;
317 } else {
318 u32 entry = 0;
320 b53_write16(dev, B53_ARLIO_PAGE, dev->vta_regs[1], vid);
321 b53_do_vlan_op(dev, VTA_CMD_READ);
322 b53_read32(dev, B53_ARLIO_PAGE, dev->vta_regs[2], &entry);
323 vlan->members = entry & VTE_MEMBERS;
324 vlan->untag = (entry >> VTE_UNTAG_S) & VTE_MEMBERS;
325 vlan->valid = true;
329 static void b53_set_forwarding(struct b53_device *dev, int enable)
331 u8 mgmt;
333 b53_read8(dev, B53_CTRL_PAGE, B53_SWITCH_MODE, &mgmt);
335 if (enable)
336 mgmt |= SM_SW_FWD_EN;
337 else
338 mgmt &= ~SM_SW_FWD_EN;
340 b53_write8(dev, B53_CTRL_PAGE, B53_SWITCH_MODE, mgmt);
342 /* Include IMP port in dumb forwarding mode
344 b53_read8(dev, B53_CTRL_PAGE, B53_SWITCH_CTRL, &mgmt);
345 mgmt |= B53_MII_DUMB_FWDG_EN;
346 b53_write8(dev, B53_CTRL_PAGE, B53_SWITCH_CTRL, mgmt);
348 /* Look at B53_UC_FWD_EN and B53_MC_FWD_EN to decide whether
349 * frames should be flooded or not.
351 b53_read8(dev, B53_CTRL_PAGE, B53_IP_MULTICAST_CTRL, &mgmt);
352 mgmt |= B53_UC_FWD_EN | B53_MC_FWD_EN | B53_IPMC_FWD_EN;
353 b53_write8(dev, B53_CTRL_PAGE, B53_IP_MULTICAST_CTRL, mgmt);
356 static void b53_enable_vlan(struct b53_device *dev, int port, bool enable,
357 bool enable_filtering)
359 u8 mgmt, vc0, vc1, vc4 = 0, vc5;
361 b53_read8(dev, B53_CTRL_PAGE, B53_SWITCH_MODE, &mgmt);
362 b53_read8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL0, &vc0);
363 b53_read8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL1, &vc1);
365 if (is5325(dev) || is5365(dev)) {
366 b53_read8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL4_25, &vc4);
367 b53_read8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL5_25, &vc5);
368 } else if (is63xx(dev)) {
369 b53_read8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL4_63XX, &vc4);
370 b53_read8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL5_63XX, &vc5);
371 } else {
372 b53_read8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL4, &vc4);
373 b53_read8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL5, &vc5);
376 if (enable) {
377 vc0 |= VC0_VLAN_EN | VC0_VID_CHK_EN | VC0_VID_HASH_VID;
378 vc1 |= VC1_RX_MCST_UNTAG_EN | VC1_RX_MCST_FWD_EN;
379 vc4 &= ~VC4_ING_VID_CHECK_MASK;
380 if (enable_filtering) {
381 vc4 |= VC4_ING_VID_VIO_DROP << VC4_ING_VID_CHECK_S;
382 vc5 |= VC5_DROP_VTABLE_MISS;
383 } else {
384 vc4 |= VC4_ING_VID_VIO_FWD << VC4_ING_VID_CHECK_S;
385 vc5 &= ~VC5_DROP_VTABLE_MISS;
388 if (is5325(dev))
389 vc0 &= ~VC0_RESERVED_1;
391 if (is5325(dev) || is5365(dev))
392 vc1 |= VC1_RX_MCST_TAG_EN;
394 } else {
395 vc0 &= ~(VC0_VLAN_EN | VC0_VID_CHK_EN | VC0_VID_HASH_VID);
396 vc1 &= ~(VC1_RX_MCST_UNTAG_EN | VC1_RX_MCST_FWD_EN);
397 vc4 &= ~VC4_ING_VID_CHECK_MASK;
398 vc5 &= ~VC5_DROP_VTABLE_MISS;
400 if (is5325(dev) || is5365(dev))
401 vc4 |= VC4_ING_VID_VIO_FWD << VC4_ING_VID_CHECK_S;
402 else
403 vc4 |= VC4_ING_VID_VIO_TO_IMP << VC4_ING_VID_CHECK_S;
405 if (is5325(dev) || is5365(dev))
406 vc1 &= ~VC1_RX_MCST_TAG_EN;
409 if (!is5325(dev) && !is5365(dev))
410 vc5 &= ~VC5_VID_FFF_EN;
412 b53_write8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL0, vc0);
413 b53_write8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL1, vc1);
415 if (is5325(dev) || is5365(dev)) {
416 /* enable the high 8 bit vid check on 5325 */
417 if (is5325(dev) && enable)
418 b53_write8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL3,
419 VC3_HIGH_8BIT_EN);
420 else
421 b53_write8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL3, 0);
423 b53_write8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL4_25, vc4);
424 b53_write8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL5_25, vc5);
425 } else if (is63xx(dev)) {
426 b53_write16(dev, B53_VLAN_PAGE, B53_VLAN_CTRL3_63XX, 0);
427 b53_write8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL4_63XX, vc4);
428 b53_write8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL5_63XX, vc5);
429 } else {
430 b53_write16(dev, B53_VLAN_PAGE, B53_VLAN_CTRL3, 0);
431 b53_write8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL4, vc4);
432 b53_write8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL5, vc5);
435 b53_write8(dev, B53_CTRL_PAGE, B53_SWITCH_MODE, mgmt);
437 dev->vlan_enabled = enable;
439 dev_dbg(dev->dev, "Port %d VLAN enabled: %d, filtering: %d\n",
440 port, enable, enable_filtering);
443 static int b53_set_jumbo(struct b53_device *dev, bool enable, bool allow_10_100)
445 u32 port_mask = 0;
446 u16 max_size = JMS_MIN_SIZE;
448 if (is5325(dev) || is5365(dev))
449 return -EINVAL;
451 if (enable) {
452 port_mask = dev->enabled_ports;
453 max_size = JMS_MAX_SIZE;
454 if (allow_10_100)
455 port_mask |= JPM_10_100_JUMBO_EN;
458 b53_write32(dev, B53_JUMBO_PAGE, dev->jumbo_pm_reg, port_mask);
459 return b53_write16(dev, B53_JUMBO_PAGE, dev->jumbo_size_reg, max_size);
462 static int b53_flush_arl(struct b53_device *dev, u8 mask)
464 unsigned int i;
466 b53_write8(dev, B53_CTRL_PAGE, B53_FAST_AGE_CTRL,
467 FAST_AGE_DONE | FAST_AGE_DYNAMIC | mask);
469 for (i = 0; i < 10; i++) {
470 u8 fast_age_ctrl;
472 b53_read8(dev, B53_CTRL_PAGE, B53_FAST_AGE_CTRL,
473 &fast_age_ctrl);
475 if (!(fast_age_ctrl & FAST_AGE_DONE))
476 goto out;
478 msleep(1);
481 return -ETIMEDOUT;
482 out:
483 /* Only age dynamic entries (default behavior) */
484 b53_write8(dev, B53_CTRL_PAGE, B53_FAST_AGE_CTRL, FAST_AGE_DYNAMIC);
485 return 0;
488 static int b53_fast_age_port(struct b53_device *dev, int port)
490 b53_write8(dev, B53_CTRL_PAGE, B53_FAST_AGE_PORT_CTRL, port);
492 return b53_flush_arl(dev, FAST_AGE_PORT);
495 static int b53_fast_age_vlan(struct b53_device *dev, u16 vid)
497 b53_write16(dev, B53_CTRL_PAGE, B53_FAST_AGE_VID_CTRL, vid);
499 return b53_flush_arl(dev, FAST_AGE_VLAN);
502 void b53_imp_vlan_setup(struct dsa_switch *ds, int cpu_port)
504 struct b53_device *dev = ds->priv;
505 unsigned int i;
506 u16 pvlan;
508 /* Enable the IMP port to be in the same VLAN as the other ports
509 * on a per-port basis such that we only have Port i and IMP in
510 * the same VLAN.
512 b53_for_each_port(dev, i) {
513 b53_read16(dev, B53_PVLAN_PAGE, B53_PVLAN_PORT_MASK(i), &pvlan);
514 pvlan |= BIT(cpu_port);
515 b53_write16(dev, B53_PVLAN_PAGE, B53_PVLAN_PORT_MASK(i), pvlan);
518 EXPORT_SYMBOL(b53_imp_vlan_setup);
520 static void b53_port_set_ucast_flood(struct b53_device *dev, int port,
521 bool unicast)
523 u16 uc;
525 b53_read16(dev, B53_CTRL_PAGE, B53_UC_FLOOD_MASK, &uc);
526 if (unicast)
527 uc |= BIT(port);
528 else
529 uc &= ~BIT(port);
530 b53_write16(dev, B53_CTRL_PAGE, B53_UC_FLOOD_MASK, uc);
533 static void b53_port_set_mcast_flood(struct b53_device *dev, int port,
534 bool multicast)
536 u16 mc;
538 b53_read16(dev, B53_CTRL_PAGE, B53_MC_FLOOD_MASK, &mc);
539 if (multicast)
540 mc |= BIT(port);
541 else
542 mc &= ~BIT(port);
543 b53_write16(dev, B53_CTRL_PAGE, B53_MC_FLOOD_MASK, mc);
545 b53_read16(dev, B53_CTRL_PAGE, B53_IPMC_FLOOD_MASK, &mc);
546 if (multicast)
547 mc |= BIT(port);
548 else
549 mc &= ~BIT(port);
550 b53_write16(dev, B53_CTRL_PAGE, B53_IPMC_FLOOD_MASK, mc);
553 static void b53_port_set_learning(struct b53_device *dev, int port,
554 bool learning)
556 u16 reg;
558 b53_read16(dev, B53_CTRL_PAGE, B53_DIS_LEARNING, &reg);
559 if (learning)
560 reg &= ~BIT(port);
561 else
562 reg |= BIT(port);
563 b53_write16(dev, B53_CTRL_PAGE, B53_DIS_LEARNING, reg);
566 static void b53_eee_enable_set(struct dsa_switch *ds, int port, bool enable)
568 struct b53_device *dev = ds->priv;
569 u16 reg;
571 b53_read16(dev, B53_EEE_PAGE, B53_EEE_EN_CTRL, &reg);
572 if (enable)
573 reg |= BIT(port);
574 else
575 reg &= ~BIT(port);
576 b53_write16(dev, B53_EEE_PAGE, B53_EEE_EN_CTRL, reg);
579 int b53_enable_port(struct dsa_switch *ds, int port, struct phy_device *phy)
581 struct b53_device *dev = ds->priv;
582 unsigned int cpu_port;
583 int ret = 0;
584 u16 pvlan;
586 if (!dsa_is_user_port(ds, port))
587 return 0;
589 cpu_port = dsa_to_port(ds, port)->cpu_dp->index;
591 b53_port_set_ucast_flood(dev, port, true);
592 b53_port_set_mcast_flood(dev, port, true);
593 b53_port_set_learning(dev, port, false);
595 if (dev->ops->irq_enable)
596 ret = dev->ops->irq_enable(dev, port);
597 if (ret)
598 return ret;
600 /* Clear the Rx and Tx disable bits and set to no spanning tree */
601 b53_write8(dev, B53_CTRL_PAGE, B53_PORT_CTRL(port), 0);
603 /* Set this port, and only this one to be in the default VLAN,
604 * if member of a bridge, restore its membership prior to
605 * bringing down this port.
607 b53_read16(dev, B53_PVLAN_PAGE, B53_PVLAN_PORT_MASK(port), &pvlan);
608 pvlan &= ~0x1ff;
609 pvlan |= BIT(port);
610 pvlan |= dev->ports[port].vlan_ctl_mask;
611 b53_write16(dev, B53_PVLAN_PAGE, B53_PVLAN_PORT_MASK(port), pvlan);
613 b53_imp_vlan_setup(ds, cpu_port);
615 /* If EEE was enabled, restore it */
616 if (dev->ports[port].eee.eee_enabled)
617 b53_eee_enable_set(ds, port, true);
619 return 0;
621 EXPORT_SYMBOL(b53_enable_port);
623 void b53_disable_port(struct dsa_switch *ds, int port)
625 struct b53_device *dev = ds->priv;
626 u8 reg;
628 /* Disable Tx/Rx for the port */
629 b53_read8(dev, B53_CTRL_PAGE, B53_PORT_CTRL(port), &reg);
630 reg |= PORT_CTRL_RX_DISABLE | PORT_CTRL_TX_DISABLE;
631 b53_write8(dev, B53_CTRL_PAGE, B53_PORT_CTRL(port), reg);
633 if (dev->ops->irq_disable)
634 dev->ops->irq_disable(dev, port);
636 EXPORT_SYMBOL(b53_disable_port);
638 void b53_brcm_hdr_setup(struct dsa_switch *ds, int port)
640 struct b53_device *dev = ds->priv;
641 bool tag_en = !(dev->tag_protocol == DSA_TAG_PROTO_NONE);
642 u8 hdr_ctl, val;
643 u16 reg;
645 /* Resolve which bit controls the Broadcom tag */
646 switch (port) {
647 case 8:
648 val = BRCM_HDR_P8_EN;
649 break;
650 case 7:
651 val = BRCM_HDR_P7_EN;
652 break;
653 case 5:
654 val = BRCM_HDR_P5_EN;
655 break;
656 default:
657 val = 0;
658 break;
661 /* Enable management mode if tagging is requested */
662 b53_read8(dev, B53_CTRL_PAGE, B53_SWITCH_MODE, &hdr_ctl);
663 if (tag_en)
664 hdr_ctl |= SM_SW_FWD_MODE;
665 else
666 hdr_ctl &= ~SM_SW_FWD_MODE;
667 b53_write8(dev, B53_CTRL_PAGE, B53_SWITCH_MODE, hdr_ctl);
669 /* Configure the appropriate IMP port */
670 b53_read8(dev, B53_MGMT_PAGE, B53_GLOBAL_CONFIG, &hdr_ctl);
671 if (port == 8)
672 hdr_ctl |= GC_FRM_MGMT_PORT_MII;
673 else if (port == 5)
674 hdr_ctl |= GC_FRM_MGMT_PORT_M;
675 b53_write8(dev, B53_MGMT_PAGE, B53_GLOBAL_CONFIG, hdr_ctl);
677 /* Enable Broadcom tags for IMP port */
678 b53_read8(dev, B53_MGMT_PAGE, B53_BRCM_HDR, &hdr_ctl);
679 if (tag_en)
680 hdr_ctl |= val;
681 else
682 hdr_ctl &= ~val;
683 b53_write8(dev, B53_MGMT_PAGE, B53_BRCM_HDR, hdr_ctl);
685 /* Registers below are only accessible on newer devices */
686 if (!is58xx(dev))
687 return;
689 /* Enable reception Broadcom tag for CPU TX (switch RX) to
690 * allow us to tag outgoing frames
692 b53_read16(dev, B53_MGMT_PAGE, B53_BRCM_HDR_RX_DIS, &reg);
693 if (tag_en)
694 reg &= ~BIT(port);
695 else
696 reg |= BIT(port);
697 b53_write16(dev, B53_MGMT_PAGE, B53_BRCM_HDR_RX_DIS, reg);
699 /* Enable transmission of Broadcom tags from the switch (CPU RX) to
700 * allow delivering frames to the per-port net_devices
702 b53_read16(dev, B53_MGMT_PAGE, B53_BRCM_HDR_TX_DIS, &reg);
703 if (tag_en)
704 reg &= ~BIT(port);
705 else
706 reg |= BIT(port);
707 b53_write16(dev, B53_MGMT_PAGE, B53_BRCM_HDR_TX_DIS, reg);
709 EXPORT_SYMBOL(b53_brcm_hdr_setup);
711 static void b53_enable_cpu_port(struct b53_device *dev, int port)
713 u8 port_ctrl;
715 /* BCM5325 CPU port is at 8 */
716 if ((is5325(dev) || is5365(dev)) && port == B53_CPU_PORT_25)
717 port = B53_CPU_PORT;
719 port_ctrl = PORT_CTRL_RX_BCST_EN |
720 PORT_CTRL_RX_MCST_EN |
721 PORT_CTRL_RX_UCST_EN;
722 b53_write8(dev, B53_CTRL_PAGE, B53_PORT_CTRL(port), port_ctrl);
724 b53_brcm_hdr_setup(dev->ds, port);
726 b53_port_set_ucast_flood(dev, port, true);
727 b53_port_set_mcast_flood(dev, port, true);
728 b53_port_set_learning(dev, port, false);
731 static void b53_enable_mib(struct b53_device *dev)
733 u8 gc;
735 b53_read8(dev, B53_MGMT_PAGE, B53_GLOBAL_CONFIG, &gc);
736 gc &= ~(GC_RESET_MIB | GC_MIB_AC_EN);
737 b53_write8(dev, B53_MGMT_PAGE, B53_GLOBAL_CONFIG, gc);
740 static u16 b53_default_pvid(struct b53_device *dev)
742 if (is5325(dev) || is5365(dev))
743 return 1;
744 else
745 return 0;
748 static bool b53_vlan_port_needs_forced_tagged(struct dsa_switch *ds, int port)
750 struct b53_device *dev = ds->priv;
752 return dev->tag_protocol == DSA_TAG_PROTO_NONE && dsa_is_cpu_port(ds, port);
755 int b53_configure_vlan(struct dsa_switch *ds)
757 struct b53_device *dev = ds->priv;
758 struct b53_vlan vl = { 0 };
759 struct b53_vlan *v;
760 int i, def_vid;
761 u16 vid;
763 def_vid = b53_default_pvid(dev);
765 /* clear all vlan entries */
766 if (is5325(dev) || is5365(dev)) {
767 for (i = def_vid; i < dev->num_vlans; i++)
768 b53_set_vlan_entry(dev, i, &vl);
769 } else {
770 b53_do_vlan_op(dev, VTA_CMD_CLEAR);
773 b53_enable_vlan(dev, -1, dev->vlan_enabled, ds->vlan_filtering);
775 /* Create an untagged VLAN entry for the default PVID in case
776 * CONFIG_VLAN_8021Q is disabled and there are no calls to
777 * dsa_user_vlan_rx_add_vid() to create the default VLAN
778 * entry. Do this only when the tagging protocol is not
779 * DSA_TAG_PROTO_NONE
781 b53_for_each_port(dev, i) {
782 v = &dev->vlans[def_vid];
783 v->members |= BIT(i);
784 if (!b53_vlan_port_needs_forced_tagged(ds, i))
785 v->untag = v->members;
786 b53_write16(dev, B53_VLAN_PAGE,
787 B53_VLAN_PORT_DEF_TAG(i), def_vid);
790 /* Upon initial call we have not set-up any VLANs, but upon
791 * system resume, we need to restore all VLAN entries.
793 for (vid = def_vid; vid < dev->num_vlans; vid++) {
794 v = &dev->vlans[vid];
796 if (!v->members)
797 continue;
799 b53_set_vlan_entry(dev, vid, v);
800 b53_fast_age_vlan(dev, vid);
803 return 0;
805 EXPORT_SYMBOL(b53_configure_vlan);
807 static void b53_switch_reset_gpio(struct b53_device *dev)
809 int gpio = dev->reset_gpio;
811 if (gpio < 0)
812 return;
814 /* Reset sequence: RESET low(50ms)->high(20ms)
816 gpio_set_value(gpio, 0);
817 mdelay(50);
819 gpio_set_value(gpio, 1);
820 mdelay(20);
822 dev->current_page = 0xff;
825 static int b53_switch_reset(struct b53_device *dev)
827 unsigned int timeout = 1000;
828 u8 mgmt, reg;
830 b53_switch_reset_gpio(dev);
832 if (is539x(dev)) {
833 b53_write8(dev, B53_CTRL_PAGE, B53_SOFTRESET, 0x83);
834 b53_write8(dev, B53_CTRL_PAGE, B53_SOFTRESET, 0x00);
837 /* This is specific to 58xx devices here, do not use is58xx() which
838 * covers the larger Starfigther 2 family, including 7445/7278 which
839 * still use this driver as a library and need to perform the reset
840 * earlier.
842 if (dev->chip_id == BCM58XX_DEVICE_ID ||
843 dev->chip_id == BCM583XX_DEVICE_ID) {
844 b53_read8(dev, B53_CTRL_PAGE, B53_SOFTRESET, &reg);
845 reg |= SW_RST | EN_SW_RST | EN_CH_RST;
846 b53_write8(dev, B53_CTRL_PAGE, B53_SOFTRESET, reg);
848 do {
849 b53_read8(dev, B53_CTRL_PAGE, B53_SOFTRESET, &reg);
850 if (!(reg & SW_RST))
851 break;
853 usleep_range(1000, 2000);
854 } while (timeout-- > 0);
856 if (timeout == 0) {
857 dev_err(dev->dev,
858 "Timeout waiting for SW_RST to clear!\n");
859 return -ETIMEDOUT;
863 b53_read8(dev, B53_CTRL_PAGE, B53_SWITCH_MODE, &mgmt);
865 if (!(mgmt & SM_SW_FWD_EN)) {
866 mgmt &= ~SM_SW_FWD_MODE;
867 mgmt |= SM_SW_FWD_EN;
869 b53_write8(dev, B53_CTRL_PAGE, B53_SWITCH_MODE, mgmt);
870 b53_read8(dev, B53_CTRL_PAGE, B53_SWITCH_MODE, &mgmt);
872 if (!(mgmt & SM_SW_FWD_EN)) {
873 dev_err(dev->dev, "Failed to enable switch!\n");
874 return -EINVAL;
878 b53_enable_mib(dev);
880 return b53_flush_arl(dev, FAST_AGE_STATIC);
883 static int b53_phy_read16(struct dsa_switch *ds, int addr, int reg)
885 struct b53_device *priv = ds->priv;
886 u16 value = 0;
887 int ret;
889 if (priv->ops->phy_read16)
890 ret = priv->ops->phy_read16(priv, addr, reg, &value);
891 else
892 ret = b53_read16(priv, B53_PORT_MII_PAGE(addr),
893 reg * 2, &value);
895 return ret ? ret : value;
898 static int b53_phy_write16(struct dsa_switch *ds, int addr, int reg, u16 val)
900 struct b53_device *priv = ds->priv;
902 if (priv->ops->phy_write16)
903 return priv->ops->phy_write16(priv, addr, reg, val);
905 return b53_write16(priv, B53_PORT_MII_PAGE(addr), reg * 2, val);
908 static int b53_reset_switch(struct b53_device *priv)
910 /* reset vlans */
911 memset(priv->vlans, 0, sizeof(*priv->vlans) * priv->num_vlans);
912 memset(priv->ports, 0, sizeof(*priv->ports) * priv->num_ports);
914 priv->serdes_lane = B53_INVALID_LANE;
916 return b53_switch_reset(priv);
919 static int b53_apply_config(struct b53_device *priv)
921 /* disable switching */
922 b53_set_forwarding(priv, 0);
924 b53_configure_vlan(priv->ds);
926 /* enable switching */
927 b53_set_forwarding(priv, 1);
929 return 0;
932 static void b53_reset_mib(struct b53_device *priv)
934 u8 gc;
936 b53_read8(priv, B53_MGMT_PAGE, B53_GLOBAL_CONFIG, &gc);
938 b53_write8(priv, B53_MGMT_PAGE, B53_GLOBAL_CONFIG, gc | GC_RESET_MIB);
939 msleep(1);
940 b53_write8(priv, B53_MGMT_PAGE, B53_GLOBAL_CONFIG, gc & ~GC_RESET_MIB);
941 msleep(1);
944 static const struct b53_mib_desc *b53_get_mib(struct b53_device *dev)
946 if (is5365(dev))
947 return b53_mibs_65;
948 else if (is63xx(dev))
949 return b53_mibs_63xx;
950 else if (is58xx(dev))
951 return b53_mibs_58xx;
952 else
953 return b53_mibs;
956 static unsigned int b53_get_mib_size(struct b53_device *dev)
958 if (is5365(dev))
959 return B53_MIBS_65_SIZE;
960 else if (is63xx(dev))
961 return B53_MIBS_63XX_SIZE;
962 else if (is58xx(dev))
963 return B53_MIBS_58XX_SIZE;
964 else
965 return B53_MIBS_SIZE;
968 static struct phy_device *b53_get_phy_device(struct dsa_switch *ds, int port)
970 /* These ports typically do not have built-in PHYs */
971 switch (port) {
972 case B53_CPU_PORT_25:
973 case 7:
974 case B53_CPU_PORT:
975 return NULL;
978 return mdiobus_get_phy(ds->user_mii_bus, port);
981 void b53_get_strings(struct dsa_switch *ds, int port, u32 stringset,
982 uint8_t *data)
984 struct b53_device *dev = ds->priv;
985 const struct b53_mib_desc *mibs = b53_get_mib(dev);
986 unsigned int mib_size = b53_get_mib_size(dev);
987 struct phy_device *phydev;
988 unsigned int i;
990 if (stringset == ETH_SS_STATS) {
991 for (i = 0; i < mib_size; i++)
992 ethtool_puts(&data, mibs[i].name);
993 } else if (stringset == ETH_SS_PHY_STATS) {
994 phydev = b53_get_phy_device(ds, port);
995 if (!phydev)
996 return;
998 phy_ethtool_get_strings(phydev, data);
1001 EXPORT_SYMBOL(b53_get_strings);
1003 void b53_get_ethtool_stats(struct dsa_switch *ds, int port, uint64_t *data)
1005 struct b53_device *dev = ds->priv;
1006 const struct b53_mib_desc *mibs = b53_get_mib(dev);
1007 unsigned int mib_size = b53_get_mib_size(dev);
1008 const struct b53_mib_desc *s;
1009 unsigned int i;
1010 u64 val = 0;
1012 if (is5365(dev) && port == 5)
1013 port = 8;
1015 mutex_lock(&dev->stats_mutex);
1017 for (i = 0; i < mib_size; i++) {
1018 s = &mibs[i];
1020 if (s->size == 8) {
1021 b53_read64(dev, B53_MIB_PAGE(port), s->offset, &val);
1022 } else {
1023 u32 val32;
1025 b53_read32(dev, B53_MIB_PAGE(port), s->offset,
1026 &val32);
1027 val = val32;
1029 data[i] = (u64)val;
1032 mutex_unlock(&dev->stats_mutex);
1034 EXPORT_SYMBOL(b53_get_ethtool_stats);
1036 void b53_get_ethtool_phy_stats(struct dsa_switch *ds, int port, uint64_t *data)
1038 struct phy_device *phydev;
1040 phydev = b53_get_phy_device(ds, port);
1041 if (!phydev)
1042 return;
1044 phy_ethtool_get_stats(phydev, NULL, data);
1046 EXPORT_SYMBOL(b53_get_ethtool_phy_stats);
1048 int b53_get_sset_count(struct dsa_switch *ds, int port, int sset)
1050 struct b53_device *dev = ds->priv;
1051 struct phy_device *phydev;
1053 if (sset == ETH_SS_STATS) {
1054 return b53_get_mib_size(dev);
1055 } else if (sset == ETH_SS_PHY_STATS) {
1056 phydev = b53_get_phy_device(ds, port);
1057 if (!phydev)
1058 return 0;
1060 return phy_ethtool_get_sset_count(phydev);
1063 return 0;
1065 EXPORT_SYMBOL(b53_get_sset_count);
1067 enum b53_devlink_resource_id {
1068 B53_DEVLINK_PARAM_ID_VLAN_TABLE,
1071 static u64 b53_devlink_vlan_table_get(void *priv)
1073 struct b53_device *dev = priv;
1074 struct b53_vlan *vl;
1075 unsigned int i;
1076 u64 count = 0;
1078 for (i = 0; i < dev->num_vlans; i++) {
1079 vl = &dev->vlans[i];
1080 if (vl->members)
1081 count++;
1084 return count;
1087 int b53_setup_devlink_resources(struct dsa_switch *ds)
1089 struct devlink_resource_size_params size_params;
1090 struct b53_device *dev = ds->priv;
1091 int err;
1093 devlink_resource_size_params_init(&size_params, dev->num_vlans,
1094 dev->num_vlans,
1095 1, DEVLINK_RESOURCE_UNIT_ENTRY);
1097 err = dsa_devlink_resource_register(ds, "VLAN", dev->num_vlans,
1098 B53_DEVLINK_PARAM_ID_VLAN_TABLE,
1099 DEVLINK_RESOURCE_ID_PARENT_TOP,
1100 &size_params);
1101 if (err)
1102 goto out;
1104 dsa_devlink_resource_occ_get_register(ds,
1105 B53_DEVLINK_PARAM_ID_VLAN_TABLE,
1106 b53_devlink_vlan_table_get, dev);
1108 return 0;
1109 out:
1110 dsa_devlink_resources_unregister(ds);
1111 return err;
1113 EXPORT_SYMBOL(b53_setup_devlink_resources);
1115 static int b53_setup(struct dsa_switch *ds)
1117 struct b53_device *dev = ds->priv;
1118 unsigned int port;
1119 int ret;
1121 /* Request bridge PVID untagged when DSA_TAG_PROTO_NONE is set
1122 * which forces the CPU port to be tagged in all VLANs.
1124 ds->untag_bridge_pvid = dev->tag_protocol == DSA_TAG_PROTO_NONE;
1126 ret = b53_reset_switch(dev);
1127 if (ret) {
1128 dev_err(ds->dev, "failed to reset switch\n");
1129 return ret;
1132 b53_reset_mib(dev);
1134 ret = b53_apply_config(dev);
1135 if (ret) {
1136 dev_err(ds->dev, "failed to apply configuration\n");
1137 return ret;
1140 /* Configure IMP/CPU port, disable all other ports. Enabled
1141 * ports will be configured with .port_enable
1143 for (port = 0; port < dev->num_ports; port++) {
1144 if (dsa_is_cpu_port(ds, port))
1145 b53_enable_cpu_port(dev, port);
1146 else
1147 b53_disable_port(ds, port);
1150 return b53_setup_devlink_resources(ds);
1153 static void b53_teardown(struct dsa_switch *ds)
1155 dsa_devlink_resources_unregister(ds);
1158 static void b53_force_link(struct b53_device *dev, int port, int link)
1160 u8 reg, val, off;
1162 /* Override the port settings */
1163 if (port == dev->imp_port) {
1164 off = B53_PORT_OVERRIDE_CTRL;
1165 val = PORT_OVERRIDE_EN;
1166 } else {
1167 off = B53_GMII_PORT_OVERRIDE_CTRL(port);
1168 val = GMII_PO_EN;
1171 b53_read8(dev, B53_CTRL_PAGE, off, &reg);
1172 reg |= val;
1173 if (link)
1174 reg |= PORT_OVERRIDE_LINK;
1175 else
1176 reg &= ~PORT_OVERRIDE_LINK;
1177 b53_write8(dev, B53_CTRL_PAGE, off, reg);
1180 static void b53_force_port_config(struct b53_device *dev, int port,
1181 int speed, int duplex,
1182 bool tx_pause, bool rx_pause)
1184 u8 reg, val, off;
1186 /* Override the port settings */
1187 if (port == dev->imp_port) {
1188 off = B53_PORT_OVERRIDE_CTRL;
1189 val = PORT_OVERRIDE_EN;
1190 } else {
1191 off = B53_GMII_PORT_OVERRIDE_CTRL(port);
1192 val = GMII_PO_EN;
1195 b53_read8(dev, B53_CTRL_PAGE, off, &reg);
1196 reg |= val;
1197 if (duplex == DUPLEX_FULL)
1198 reg |= PORT_OVERRIDE_FULL_DUPLEX;
1199 else
1200 reg &= ~PORT_OVERRIDE_FULL_DUPLEX;
1202 switch (speed) {
1203 case 2000:
1204 reg |= PORT_OVERRIDE_SPEED_2000M;
1205 fallthrough;
1206 case SPEED_1000:
1207 reg |= PORT_OVERRIDE_SPEED_1000M;
1208 break;
1209 case SPEED_100:
1210 reg |= PORT_OVERRIDE_SPEED_100M;
1211 break;
1212 case SPEED_10:
1213 reg |= PORT_OVERRIDE_SPEED_10M;
1214 break;
1215 default:
1216 dev_err(dev->dev, "unknown speed: %d\n", speed);
1217 return;
1220 if (rx_pause)
1221 reg |= PORT_OVERRIDE_RX_FLOW;
1222 if (tx_pause)
1223 reg |= PORT_OVERRIDE_TX_FLOW;
1225 b53_write8(dev, B53_CTRL_PAGE, off, reg);
1228 static void b53_adjust_63xx_rgmii(struct dsa_switch *ds, int port,
1229 phy_interface_t interface)
1231 struct b53_device *dev = ds->priv;
1232 u8 rgmii_ctrl = 0, off;
1234 if (port == dev->imp_port)
1235 off = B53_RGMII_CTRL_IMP;
1236 else
1237 off = B53_RGMII_CTRL_P(port);
1239 b53_read8(dev, B53_CTRL_PAGE, off, &rgmii_ctrl);
1241 switch (interface) {
1242 case PHY_INTERFACE_MODE_RGMII_ID:
1243 rgmii_ctrl |= (RGMII_CTRL_DLL_RXC | RGMII_CTRL_DLL_TXC);
1244 break;
1245 case PHY_INTERFACE_MODE_RGMII_RXID:
1246 rgmii_ctrl &= ~(RGMII_CTRL_DLL_TXC);
1247 rgmii_ctrl |= RGMII_CTRL_DLL_RXC;
1248 break;
1249 case PHY_INTERFACE_MODE_RGMII_TXID:
1250 rgmii_ctrl &= ~(RGMII_CTRL_DLL_RXC);
1251 rgmii_ctrl |= RGMII_CTRL_DLL_TXC;
1252 break;
1253 case PHY_INTERFACE_MODE_RGMII:
1254 default:
1255 rgmii_ctrl &= ~(RGMII_CTRL_DLL_RXC | RGMII_CTRL_DLL_TXC);
1256 break;
1259 if (port != dev->imp_port) {
1260 if (is63268(dev))
1261 rgmii_ctrl |= RGMII_CTRL_MII_OVERRIDE;
1263 rgmii_ctrl |= RGMII_CTRL_ENABLE_GMII;
1266 b53_write8(dev, B53_CTRL_PAGE, off, rgmii_ctrl);
1268 dev_dbg(ds->dev, "Configured port %d for %s\n", port,
1269 phy_modes(interface));
1272 static void b53_adjust_531x5_rgmii(struct dsa_switch *ds, int port,
1273 phy_interface_t interface)
1275 struct b53_device *dev = ds->priv;
1276 u8 rgmii_ctrl = 0, off;
1278 if (port == dev->imp_port)
1279 off = B53_RGMII_CTRL_IMP;
1280 else
1281 off = B53_RGMII_CTRL_P(port);
1283 /* Configure the port RGMII clock delay by DLL disabled and
1284 * tx_clk aligned timing (restoring to reset defaults)
1286 b53_read8(dev, B53_CTRL_PAGE, off, &rgmii_ctrl);
1287 rgmii_ctrl &= ~(RGMII_CTRL_DLL_RXC | RGMII_CTRL_DLL_TXC |
1288 RGMII_CTRL_TIMING_SEL);
1290 /* PHY_INTERFACE_MODE_RGMII_TXID means TX internal delay, make
1291 * sure that we enable the port TX clock internal delay to
1292 * account for this internal delay that is inserted, otherwise
1293 * the switch won't be able to receive correctly.
1295 * PHY_INTERFACE_MODE_RGMII means that we are not introducing
1296 * any delay neither on transmission nor reception, so the
1297 * BCM53125 must also be configured accordingly to account for
1298 * the lack of delay and introduce
1300 * The BCM53125 switch has its RX clock and TX clock control
1301 * swapped, hence the reason why we modify the TX clock path in
1302 * the "RGMII" case
1304 if (interface == PHY_INTERFACE_MODE_RGMII_TXID)
1305 rgmii_ctrl |= RGMII_CTRL_DLL_TXC;
1306 if (interface == PHY_INTERFACE_MODE_RGMII)
1307 rgmii_ctrl |= RGMII_CTRL_DLL_TXC | RGMII_CTRL_DLL_RXC;
1308 rgmii_ctrl |= RGMII_CTRL_TIMING_SEL;
1309 b53_write8(dev, B53_CTRL_PAGE, off, rgmii_ctrl);
1311 dev_info(ds->dev, "Configured port %d for %s\n", port,
1312 phy_modes(interface));
1315 static void b53_adjust_5325_mii(struct dsa_switch *ds, int port)
1317 struct b53_device *dev = ds->priv;
1318 u8 reg = 0;
1320 b53_read8(dev, B53_CTRL_PAGE, B53_PORT_OVERRIDE_CTRL,
1321 &reg);
1323 /* reverse mii needs to be enabled */
1324 if (!(reg & PORT_OVERRIDE_RV_MII_25)) {
1325 b53_write8(dev, B53_CTRL_PAGE, B53_PORT_OVERRIDE_CTRL,
1326 reg | PORT_OVERRIDE_RV_MII_25);
1327 b53_read8(dev, B53_CTRL_PAGE, B53_PORT_OVERRIDE_CTRL,
1328 &reg);
1330 if (!(reg & PORT_OVERRIDE_RV_MII_25)) {
1331 dev_err(ds->dev,
1332 "Failed to enable reverse MII mode\n");
1333 return;
1338 void b53_port_event(struct dsa_switch *ds, int port)
1340 struct b53_device *dev = ds->priv;
1341 bool link;
1342 u16 sts;
1344 b53_read16(dev, B53_STAT_PAGE, B53_LINK_STAT, &sts);
1345 link = !!(sts & BIT(port));
1346 dsa_port_phylink_mac_change(ds, port, link);
1348 EXPORT_SYMBOL(b53_port_event);
1350 static void b53_phylink_get_caps(struct dsa_switch *ds, int port,
1351 struct phylink_config *config)
1353 struct b53_device *dev = ds->priv;
1355 /* Internal ports need GMII for PHYLIB */
1356 __set_bit(PHY_INTERFACE_MODE_GMII, config->supported_interfaces);
1358 /* These switches appear to support MII and RevMII too, but beyond
1359 * this, the code gives very few clues. FIXME: We probably need more
1360 * interface modes here.
1362 * According to b53_srab_mux_init(), ports 3..5 can support:
1363 * SGMII, MII, GMII, RGMII or INTERNAL depending on the MUX setting.
1364 * However, the interface mode read from the MUX configuration is
1365 * not passed back to DSA, so phylink uses NA.
1366 * DT can specify RGMII for ports 0, 1.
1367 * For MDIO, port 8 can be RGMII_TXID.
1369 __set_bit(PHY_INTERFACE_MODE_MII, config->supported_interfaces);
1370 __set_bit(PHY_INTERFACE_MODE_REVMII, config->supported_interfaces);
1372 config->mac_capabilities = MAC_ASYM_PAUSE | MAC_SYM_PAUSE |
1373 MAC_10 | MAC_100;
1375 /* 5325/5365 are not capable of gigabit speeds, everything else is.
1376 * Note: the original code also exclulded Gigagbit for MII, RevMII
1377 * and 802.3z modes. MII and RevMII are not able to work above 100M,
1378 * so will be excluded by the generic validator implementation.
1379 * However, the exclusion of Gigabit for 802.3z just seems wrong.
1381 if (!(is5325(dev) || is5365(dev)))
1382 config->mac_capabilities |= MAC_1000;
1384 /* Get the implementation specific capabilities */
1385 if (dev->ops->phylink_get_caps)
1386 dev->ops->phylink_get_caps(dev, port, config);
1389 static struct phylink_pcs *b53_phylink_mac_select_pcs(struct phylink_config *config,
1390 phy_interface_t interface)
1392 struct dsa_port *dp = dsa_phylink_to_port(config);
1393 struct b53_device *dev = dp->ds->priv;
1395 if (!dev->ops->phylink_mac_select_pcs)
1396 return NULL;
1398 return dev->ops->phylink_mac_select_pcs(dev, dp->index, interface);
1401 static void b53_phylink_mac_config(struct phylink_config *config,
1402 unsigned int mode,
1403 const struct phylink_link_state *state)
1405 struct dsa_port *dp = dsa_phylink_to_port(config);
1406 phy_interface_t interface = state->interface;
1407 struct dsa_switch *ds = dp->ds;
1408 struct b53_device *dev = ds->priv;
1409 int port = dp->index;
1411 if (is63xx(dev) && port >= B53_63XX_RGMII0)
1412 b53_adjust_63xx_rgmii(ds, port, interface);
1414 if (mode == MLO_AN_FIXED) {
1415 if (is531x5(dev) && phy_interface_mode_is_rgmii(interface))
1416 b53_adjust_531x5_rgmii(ds, port, interface);
1418 /* configure MII port if necessary */
1419 if (is5325(dev))
1420 b53_adjust_5325_mii(ds, port);
1424 static void b53_phylink_mac_link_down(struct phylink_config *config,
1425 unsigned int mode,
1426 phy_interface_t interface)
1428 struct dsa_port *dp = dsa_phylink_to_port(config);
1429 struct b53_device *dev = dp->ds->priv;
1430 int port = dp->index;
1432 if (mode == MLO_AN_PHY)
1433 return;
1435 if (mode == MLO_AN_FIXED) {
1436 b53_force_link(dev, port, false);
1437 return;
1440 if (phy_interface_mode_is_8023z(interface) &&
1441 dev->ops->serdes_link_set)
1442 dev->ops->serdes_link_set(dev, port, mode, interface, false);
1445 static void b53_phylink_mac_link_up(struct phylink_config *config,
1446 struct phy_device *phydev,
1447 unsigned int mode,
1448 phy_interface_t interface,
1449 int speed, int duplex,
1450 bool tx_pause, bool rx_pause)
1452 struct dsa_port *dp = dsa_phylink_to_port(config);
1453 struct dsa_switch *ds = dp->ds;
1454 struct b53_device *dev = ds->priv;
1455 struct ethtool_keee *p = &dev->ports[dp->index].eee;
1456 int port = dp->index;
1458 if (mode == MLO_AN_PHY) {
1459 /* Re-negotiate EEE if it was enabled already */
1460 p->eee_enabled = b53_eee_init(ds, port, phydev);
1461 return;
1464 if (mode == MLO_AN_FIXED) {
1465 /* Force flow control on BCM5301x's CPU port */
1466 if (is5301x(dev) && dsa_is_cpu_port(ds, port))
1467 tx_pause = rx_pause = true;
1469 b53_force_port_config(dev, port, speed, duplex,
1470 tx_pause, rx_pause);
1471 b53_force_link(dev, port, true);
1472 return;
1475 if (phy_interface_mode_is_8023z(interface) &&
1476 dev->ops->serdes_link_set)
1477 dev->ops->serdes_link_set(dev, port, mode, interface, true);
1480 int b53_vlan_filtering(struct dsa_switch *ds, int port, bool vlan_filtering,
1481 struct netlink_ext_ack *extack)
1483 struct b53_device *dev = ds->priv;
1485 b53_enable_vlan(dev, port, dev->vlan_enabled, vlan_filtering);
1487 return 0;
1489 EXPORT_SYMBOL(b53_vlan_filtering);
1491 static int b53_vlan_prepare(struct dsa_switch *ds, int port,
1492 const struct switchdev_obj_port_vlan *vlan)
1494 struct b53_device *dev = ds->priv;
1496 if ((is5325(dev) || is5365(dev)) && vlan->vid == 0)
1497 return -EOPNOTSUPP;
1499 /* Port 7 on 7278 connects to the ASP's UniMAC which is not capable of
1500 * receiving VLAN tagged frames at all, we can still allow the port to
1501 * be configured for egress untagged.
1503 if (dev->chip_id == BCM7278_DEVICE_ID && port == 7 &&
1504 !(vlan->flags & BRIDGE_VLAN_INFO_UNTAGGED))
1505 return -EINVAL;
1507 if (vlan->vid >= dev->num_vlans)
1508 return -ERANGE;
1510 b53_enable_vlan(dev, port, true, ds->vlan_filtering);
1512 return 0;
1515 int b53_vlan_add(struct dsa_switch *ds, int port,
1516 const struct switchdev_obj_port_vlan *vlan,
1517 struct netlink_ext_ack *extack)
1519 struct b53_device *dev = ds->priv;
1520 bool untagged = vlan->flags & BRIDGE_VLAN_INFO_UNTAGGED;
1521 bool pvid = vlan->flags & BRIDGE_VLAN_INFO_PVID;
1522 struct b53_vlan *vl;
1523 int err;
1525 err = b53_vlan_prepare(ds, port, vlan);
1526 if (err)
1527 return err;
1529 vl = &dev->vlans[vlan->vid];
1531 b53_get_vlan_entry(dev, vlan->vid, vl);
1533 if (vlan->vid == 0 && vlan->vid == b53_default_pvid(dev))
1534 untagged = true;
1536 vl->members |= BIT(port);
1537 if (untagged && !b53_vlan_port_needs_forced_tagged(ds, port))
1538 vl->untag |= BIT(port);
1539 else
1540 vl->untag &= ~BIT(port);
1542 b53_set_vlan_entry(dev, vlan->vid, vl);
1543 b53_fast_age_vlan(dev, vlan->vid);
1545 if (pvid && !dsa_is_cpu_port(ds, port)) {
1546 b53_write16(dev, B53_VLAN_PAGE, B53_VLAN_PORT_DEF_TAG(port),
1547 vlan->vid);
1548 b53_fast_age_vlan(dev, vlan->vid);
1551 return 0;
1553 EXPORT_SYMBOL(b53_vlan_add);
1555 int b53_vlan_del(struct dsa_switch *ds, int port,
1556 const struct switchdev_obj_port_vlan *vlan)
1558 struct b53_device *dev = ds->priv;
1559 bool untagged = vlan->flags & BRIDGE_VLAN_INFO_UNTAGGED;
1560 struct b53_vlan *vl;
1561 u16 pvid;
1563 b53_read16(dev, B53_VLAN_PAGE, B53_VLAN_PORT_DEF_TAG(port), &pvid);
1565 vl = &dev->vlans[vlan->vid];
1567 b53_get_vlan_entry(dev, vlan->vid, vl);
1569 vl->members &= ~BIT(port);
1571 if (pvid == vlan->vid)
1572 pvid = b53_default_pvid(dev);
1574 if (untagged && !b53_vlan_port_needs_forced_tagged(ds, port))
1575 vl->untag &= ~(BIT(port));
1577 b53_set_vlan_entry(dev, vlan->vid, vl);
1578 b53_fast_age_vlan(dev, vlan->vid);
1580 b53_write16(dev, B53_VLAN_PAGE, B53_VLAN_PORT_DEF_TAG(port), pvid);
1581 b53_fast_age_vlan(dev, pvid);
1583 return 0;
1585 EXPORT_SYMBOL(b53_vlan_del);
1587 /* Address Resolution Logic routines. Caller must hold &dev->arl_mutex. */
1588 static int b53_arl_op_wait(struct b53_device *dev)
1590 unsigned int timeout = 10;
1591 u8 reg;
1593 do {
1594 b53_read8(dev, B53_ARLIO_PAGE, B53_ARLTBL_RW_CTRL, &reg);
1595 if (!(reg & ARLTBL_START_DONE))
1596 return 0;
1598 usleep_range(1000, 2000);
1599 } while (timeout--);
1601 dev_warn(dev->dev, "timeout waiting for ARL to finish: 0x%02x\n", reg);
1603 return -ETIMEDOUT;
1606 static int b53_arl_rw_op(struct b53_device *dev, unsigned int op)
1608 u8 reg;
1610 if (op > ARLTBL_RW)
1611 return -EINVAL;
1613 b53_read8(dev, B53_ARLIO_PAGE, B53_ARLTBL_RW_CTRL, &reg);
1614 reg |= ARLTBL_START_DONE;
1615 if (op)
1616 reg |= ARLTBL_RW;
1617 else
1618 reg &= ~ARLTBL_RW;
1619 if (dev->vlan_enabled)
1620 reg &= ~ARLTBL_IVL_SVL_SELECT;
1621 else
1622 reg |= ARLTBL_IVL_SVL_SELECT;
1623 b53_write8(dev, B53_ARLIO_PAGE, B53_ARLTBL_RW_CTRL, reg);
1625 return b53_arl_op_wait(dev);
1628 static int b53_arl_read(struct b53_device *dev, u64 mac,
1629 u16 vid, struct b53_arl_entry *ent, u8 *idx)
1631 DECLARE_BITMAP(free_bins, B53_ARLTBL_MAX_BIN_ENTRIES);
1632 unsigned int i;
1633 int ret;
1635 ret = b53_arl_op_wait(dev);
1636 if (ret)
1637 return ret;
1639 bitmap_zero(free_bins, dev->num_arl_bins);
1641 /* Read the bins */
1642 for (i = 0; i < dev->num_arl_bins; i++) {
1643 u64 mac_vid;
1644 u32 fwd_entry;
1646 b53_read64(dev, B53_ARLIO_PAGE,
1647 B53_ARLTBL_MAC_VID_ENTRY(i), &mac_vid);
1648 b53_read32(dev, B53_ARLIO_PAGE,
1649 B53_ARLTBL_DATA_ENTRY(i), &fwd_entry);
1650 b53_arl_to_entry(ent, mac_vid, fwd_entry);
1652 if (!(fwd_entry & ARLTBL_VALID)) {
1653 set_bit(i, free_bins);
1654 continue;
1656 if ((mac_vid & ARLTBL_MAC_MASK) != mac)
1657 continue;
1658 if (dev->vlan_enabled &&
1659 ((mac_vid >> ARLTBL_VID_S) & ARLTBL_VID_MASK) != vid)
1660 continue;
1661 *idx = i;
1662 return 0;
1665 *idx = find_first_bit(free_bins, dev->num_arl_bins);
1666 return *idx >= dev->num_arl_bins ? -ENOSPC : -ENOENT;
1669 static int b53_arl_op(struct b53_device *dev, int op, int port,
1670 const unsigned char *addr, u16 vid, bool is_valid)
1672 struct b53_arl_entry ent;
1673 u32 fwd_entry;
1674 u64 mac, mac_vid = 0;
1675 u8 idx = 0;
1676 int ret;
1678 /* Convert the array into a 64-bit MAC */
1679 mac = ether_addr_to_u64(addr);
1681 /* Perform a read for the given MAC and VID */
1682 b53_write48(dev, B53_ARLIO_PAGE, B53_MAC_ADDR_IDX, mac);
1683 b53_write16(dev, B53_ARLIO_PAGE, B53_VLAN_ID_IDX, vid);
1685 /* Issue a read operation for this MAC */
1686 ret = b53_arl_rw_op(dev, 1);
1687 if (ret)
1688 return ret;
1690 ret = b53_arl_read(dev, mac, vid, &ent, &idx);
1692 /* If this is a read, just finish now */
1693 if (op)
1694 return ret;
1696 switch (ret) {
1697 case -ETIMEDOUT:
1698 return ret;
1699 case -ENOSPC:
1700 dev_dbg(dev->dev, "{%pM,%.4d} no space left in ARL\n",
1701 addr, vid);
1702 return is_valid ? ret : 0;
1703 case -ENOENT:
1704 /* We could not find a matching MAC, so reset to a new entry */
1705 dev_dbg(dev->dev, "{%pM,%.4d} not found, using idx: %d\n",
1706 addr, vid, idx);
1707 fwd_entry = 0;
1708 break;
1709 default:
1710 dev_dbg(dev->dev, "{%pM,%.4d} found, using idx: %d\n",
1711 addr, vid, idx);
1712 break;
1715 /* For multicast address, the port is a bitmask and the validity
1716 * is determined by having at least one port being still active
1718 if (!is_multicast_ether_addr(addr)) {
1719 ent.port = port;
1720 ent.is_valid = is_valid;
1721 } else {
1722 if (is_valid)
1723 ent.port |= BIT(port);
1724 else
1725 ent.port &= ~BIT(port);
1727 ent.is_valid = !!(ent.port);
1730 ent.vid = vid;
1731 ent.is_static = true;
1732 ent.is_age = false;
1733 memcpy(ent.mac, addr, ETH_ALEN);
1734 b53_arl_from_entry(&mac_vid, &fwd_entry, &ent);
1736 b53_write64(dev, B53_ARLIO_PAGE,
1737 B53_ARLTBL_MAC_VID_ENTRY(idx), mac_vid);
1738 b53_write32(dev, B53_ARLIO_PAGE,
1739 B53_ARLTBL_DATA_ENTRY(idx), fwd_entry);
1741 return b53_arl_rw_op(dev, 0);
1744 int b53_fdb_add(struct dsa_switch *ds, int port,
1745 const unsigned char *addr, u16 vid,
1746 struct dsa_db db)
1748 struct b53_device *priv = ds->priv;
1749 int ret;
1751 /* 5325 and 5365 require some more massaging, but could
1752 * be supported eventually
1754 if (is5325(priv) || is5365(priv))
1755 return -EOPNOTSUPP;
1757 mutex_lock(&priv->arl_mutex);
1758 ret = b53_arl_op(priv, 0, port, addr, vid, true);
1759 mutex_unlock(&priv->arl_mutex);
1761 return ret;
1763 EXPORT_SYMBOL(b53_fdb_add);
1765 int b53_fdb_del(struct dsa_switch *ds, int port,
1766 const unsigned char *addr, u16 vid,
1767 struct dsa_db db)
1769 struct b53_device *priv = ds->priv;
1770 int ret;
1772 mutex_lock(&priv->arl_mutex);
1773 ret = b53_arl_op(priv, 0, port, addr, vid, false);
1774 mutex_unlock(&priv->arl_mutex);
1776 return ret;
1778 EXPORT_SYMBOL(b53_fdb_del);
1780 static int b53_arl_search_wait(struct b53_device *dev)
1782 unsigned int timeout = 1000;
1783 u8 reg;
1785 do {
1786 b53_read8(dev, B53_ARLIO_PAGE, B53_ARL_SRCH_CTL, &reg);
1787 if (!(reg & ARL_SRCH_STDN))
1788 return 0;
1790 if (reg & ARL_SRCH_VLID)
1791 return 0;
1793 usleep_range(1000, 2000);
1794 } while (timeout--);
1796 return -ETIMEDOUT;
1799 static void b53_arl_search_rd(struct b53_device *dev, u8 idx,
1800 struct b53_arl_entry *ent)
1802 u64 mac_vid;
1803 u32 fwd_entry;
1805 b53_read64(dev, B53_ARLIO_PAGE,
1806 B53_ARL_SRCH_RSTL_MACVID(idx), &mac_vid);
1807 b53_read32(dev, B53_ARLIO_PAGE,
1808 B53_ARL_SRCH_RSTL(idx), &fwd_entry);
1809 b53_arl_to_entry(ent, mac_vid, fwd_entry);
1812 static int b53_fdb_copy(int port, const struct b53_arl_entry *ent,
1813 dsa_fdb_dump_cb_t *cb, void *data)
1815 if (!ent->is_valid)
1816 return 0;
1818 if (port != ent->port)
1819 return 0;
1821 return cb(ent->mac, ent->vid, ent->is_static, data);
1824 int b53_fdb_dump(struct dsa_switch *ds, int port,
1825 dsa_fdb_dump_cb_t *cb, void *data)
1827 struct b53_device *priv = ds->priv;
1828 struct b53_arl_entry results[2];
1829 unsigned int count = 0;
1830 int ret;
1831 u8 reg;
1833 mutex_lock(&priv->arl_mutex);
1835 /* Start search operation */
1836 reg = ARL_SRCH_STDN;
1837 b53_write8(priv, B53_ARLIO_PAGE, B53_ARL_SRCH_CTL, reg);
1839 do {
1840 ret = b53_arl_search_wait(priv);
1841 if (ret)
1842 break;
1844 b53_arl_search_rd(priv, 0, &results[0]);
1845 ret = b53_fdb_copy(port, &results[0], cb, data);
1846 if (ret)
1847 break;
1849 if (priv->num_arl_bins > 2) {
1850 b53_arl_search_rd(priv, 1, &results[1]);
1851 ret = b53_fdb_copy(port, &results[1], cb, data);
1852 if (ret)
1853 break;
1855 if (!results[0].is_valid && !results[1].is_valid)
1856 break;
1859 } while (count++ < b53_max_arl_entries(priv) / 2);
1861 mutex_unlock(&priv->arl_mutex);
1863 return 0;
1865 EXPORT_SYMBOL(b53_fdb_dump);
1867 int b53_mdb_add(struct dsa_switch *ds, int port,
1868 const struct switchdev_obj_port_mdb *mdb,
1869 struct dsa_db db)
1871 struct b53_device *priv = ds->priv;
1872 int ret;
1874 /* 5325 and 5365 require some more massaging, but could
1875 * be supported eventually
1877 if (is5325(priv) || is5365(priv))
1878 return -EOPNOTSUPP;
1880 mutex_lock(&priv->arl_mutex);
1881 ret = b53_arl_op(priv, 0, port, mdb->addr, mdb->vid, true);
1882 mutex_unlock(&priv->arl_mutex);
1884 return ret;
1886 EXPORT_SYMBOL(b53_mdb_add);
1888 int b53_mdb_del(struct dsa_switch *ds, int port,
1889 const struct switchdev_obj_port_mdb *mdb,
1890 struct dsa_db db)
1892 struct b53_device *priv = ds->priv;
1893 int ret;
1895 mutex_lock(&priv->arl_mutex);
1896 ret = b53_arl_op(priv, 0, port, mdb->addr, mdb->vid, false);
1897 mutex_unlock(&priv->arl_mutex);
1898 if (ret)
1899 dev_err(ds->dev, "failed to delete MDB entry\n");
1901 return ret;
1903 EXPORT_SYMBOL(b53_mdb_del);
1905 int b53_br_join(struct dsa_switch *ds, int port, struct dsa_bridge bridge,
1906 bool *tx_fwd_offload, struct netlink_ext_ack *extack)
1908 struct b53_device *dev = ds->priv;
1909 s8 cpu_port = dsa_to_port(ds, port)->cpu_dp->index;
1910 u16 pvlan, reg;
1911 unsigned int i;
1913 /* On 7278, port 7 which connects to the ASP should only receive
1914 * traffic from matching CFP rules.
1916 if (dev->chip_id == BCM7278_DEVICE_ID && port == 7)
1917 return -EINVAL;
1919 /* Make this port leave the all VLANs join since we will have proper
1920 * VLAN entries from now on
1922 if (is58xx(dev)) {
1923 b53_read16(dev, B53_VLAN_PAGE, B53_JOIN_ALL_VLAN_EN, &reg);
1924 reg &= ~BIT(port);
1925 if ((reg & BIT(cpu_port)) == BIT(cpu_port))
1926 reg &= ~BIT(cpu_port);
1927 b53_write16(dev, B53_VLAN_PAGE, B53_JOIN_ALL_VLAN_EN, reg);
1930 b53_read16(dev, B53_PVLAN_PAGE, B53_PVLAN_PORT_MASK(port), &pvlan);
1932 b53_for_each_port(dev, i) {
1933 if (!dsa_port_offloads_bridge(dsa_to_port(ds, i), &bridge))
1934 continue;
1936 /* Add this local port to the remote port VLAN control
1937 * membership and update the remote port bitmask
1939 b53_read16(dev, B53_PVLAN_PAGE, B53_PVLAN_PORT_MASK(i), &reg);
1940 reg |= BIT(port);
1941 b53_write16(dev, B53_PVLAN_PAGE, B53_PVLAN_PORT_MASK(i), reg);
1942 dev->ports[i].vlan_ctl_mask = reg;
1944 pvlan |= BIT(i);
1947 /* Configure the local port VLAN control membership to include
1948 * remote ports and update the local port bitmask
1950 b53_write16(dev, B53_PVLAN_PAGE, B53_PVLAN_PORT_MASK(port), pvlan);
1951 dev->ports[port].vlan_ctl_mask = pvlan;
1953 return 0;
1955 EXPORT_SYMBOL(b53_br_join);
1957 void b53_br_leave(struct dsa_switch *ds, int port, struct dsa_bridge bridge)
1959 struct b53_device *dev = ds->priv;
1960 struct b53_vlan *vl = &dev->vlans[0];
1961 s8 cpu_port = dsa_to_port(ds, port)->cpu_dp->index;
1962 unsigned int i;
1963 u16 pvlan, reg, pvid;
1965 b53_read16(dev, B53_PVLAN_PAGE, B53_PVLAN_PORT_MASK(port), &pvlan);
1967 b53_for_each_port(dev, i) {
1968 /* Don't touch the remaining ports */
1969 if (!dsa_port_offloads_bridge(dsa_to_port(ds, i), &bridge))
1970 continue;
1972 b53_read16(dev, B53_PVLAN_PAGE, B53_PVLAN_PORT_MASK(i), &reg);
1973 reg &= ~BIT(port);
1974 b53_write16(dev, B53_PVLAN_PAGE, B53_PVLAN_PORT_MASK(i), reg);
1975 dev->ports[port].vlan_ctl_mask = reg;
1977 /* Prevent self removal to preserve isolation */
1978 if (port != i)
1979 pvlan &= ~BIT(i);
1982 b53_write16(dev, B53_PVLAN_PAGE, B53_PVLAN_PORT_MASK(port), pvlan);
1983 dev->ports[port].vlan_ctl_mask = pvlan;
1985 pvid = b53_default_pvid(dev);
1987 /* Make this port join all VLANs without VLAN entries */
1988 if (is58xx(dev)) {
1989 b53_read16(dev, B53_VLAN_PAGE, B53_JOIN_ALL_VLAN_EN, &reg);
1990 reg |= BIT(port);
1991 if (!(reg & BIT(cpu_port)))
1992 reg |= BIT(cpu_port);
1993 b53_write16(dev, B53_VLAN_PAGE, B53_JOIN_ALL_VLAN_EN, reg);
1994 } else {
1995 b53_get_vlan_entry(dev, pvid, vl);
1996 vl->members |= BIT(port) | BIT(cpu_port);
1997 vl->untag |= BIT(port) | BIT(cpu_port);
1998 b53_set_vlan_entry(dev, pvid, vl);
2001 EXPORT_SYMBOL(b53_br_leave);
2003 void b53_br_set_stp_state(struct dsa_switch *ds, int port, u8 state)
2005 struct b53_device *dev = ds->priv;
2006 u8 hw_state;
2007 u8 reg;
2009 switch (state) {
2010 case BR_STATE_DISABLED:
2011 hw_state = PORT_CTRL_DIS_STATE;
2012 break;
2013 case BR_STATE_LISTENING:
2014 hw_state = PORT_CTRL_LISTEN_STATE;
2015 break;
2016 case BR_STATE_LEARNING:
2017 hw_state = PORT_CTRL_LEARN_STATE;
2018 break;
2019 case BR_STATE_FORWARDING:
2020 hw_state = PORT_CTRL_FWD_STATE;
2021 break;
2022 case BR_STATE_BLOCKING:
2023 hw_state = PORT_CTRL_BLOCK_STATE;
2024 break;
2025 default:
2026 dev_err(ds->dev, "invalid STP state: %d\n", state);
2027 return;
2030 b53_read8(dev, B53_CTRL_PAGE, B53_PORT_CTRL(port), &reg);
2031 reg &= ~PORT_CTRL_STP_STATE_MASK;
2032 reg |= hw_state;
2033 b53_write8(dev, B53_CTRL_PAGE, B53_PORT_CTRL(port), reg);
2035 EXPORT_SYMBOL(b53_br_set_stp_state);
2037 void b53_br_fast_age(struct dsa_switch *ds, int port)
2039 struct b53_device *dev = ds->priv;
2041 if (b53_fast_age_port(dev, port))
2042 dev_err(ds->dev, "fast ageing failed\n");
2044 EXPORT_SYMBOL(b53_br_fast_age);
2046 int b53_br_flags_pre(struct dsa_switch *ds, int port,
2047 struct switchdev_brport_flags flags,
2048 struct netlink_ext_ack *extack)
2050 if (flags.mask & ~(BR_FLOOD | BR_MCAST_FLOOD | BR_LEARNING))
2051 return -EINVAL;
2053 return 0;
2055 EXPORT_SYMBOL(b53_br_flags_pre);
2057 int b53_br_flags(struct dsa_switch *ds, int port,
2058 struct switchdev_brport_flags flags,
2059 struct netlink_ext_ack *extack)
2061 if (flags.mask & BR_FLOOD)
2062 b53_port_set_ucast_flood(ds->priv, port,
2063 !!(flags.val & BR_FLOOD));
2064 if (flags.mask & BR_MCAST_FLOOD)
2065 b53_port_set_mcast_flood(ds->priv, port,
2066 !!(flags.val & BR_MCAST_FLOOD));
2067 if (flags.mask & BR_LEARNING)
2068 b53_port_set_learning(ds->priv, port,
2069 !!(flags.val & BR_LEARNING));
2071 return 0;
2073 EXPORT_SYMBOL(b53_br_flags);
2075 static bool b53_possible_cpu_port(struct dsa_switch *ds, int port)
2077 /* Broadcom switches will accept enabling Broadcom tags on the
2078 * following ports: 5, 7 and 8, any other port is not supported
2080 switch (port) {
2081 case B53_CPU_PORT_25:
2082 case 7:
2083 case B53_CPU_PORT:
2084 return true;
2087 return false;
2090 static bool b53_can_enable_brcm_tags(struct dsa_switch *ds, int port,
2091 enum dsa_tag_protocol tag_protocol)
2093 bool ret = b53_possible_cpu_port(ds, port);
2095 if (!ret) {
2096 dev_warn(ds->dev, "Port %d is not Broadcom tag capable\n",
2097 port);
2098 return ret;
2101 switch (tag_protocol) {
2102 case DSA_TAG_PROTO_BRCM:
2103 case DSA_TAG_PROTO_BRCM_PREPEND:
2104 dev_warn(ds->dev,
2105 "Port %d is stacked to Broadcom tag switch\n", port);
2106 ret = false;
2107 break;
2108 default:
2109 ret = true;
2110 break;
2113 return ret;
2116 enum dsa_tag_protocol b53_get_tag_protocol(struct dsa_switch *ds, int port,
2117 enum dsa_tag_protocol mprot)
2119 struct b53_device *dev = ds->priv;
2121 if (!b53_can_enable_brcm_tags(ds, port, mprot)) {
2122 dev->tag_protocol = DSA_TAG_PROTO_NONE;
2123 goto out;
2126 /* Older models require a different 6 byte tag */
2127 if (is5325(dev) || is5365(dev) || is63xx(dev)) {
2128 dev->tag_protocol = DSA_TAG_PROTO_BRCM_LEGACY;
2129 goto out;
2132 /* Broadcom BCM58xx chips have a flow accelerator on Port 8
2133 * which requires us to use the prepended Broadcom tag type
2135 if (dev->chip_id == BCM58XX_DEVICE_ID && port == B53_CPU_PORT) {
2136 dev->tag_protocol = DSA_TAG_PROTO_BRCM_PREPEND;
2137 goto out;
2140 dev->tag_protocol = DSA_TAG_PROTO_BRCM;
2141 out:
2142 return dev->tag_protocol;
2144 EXPORT_SYMBOL(b53_get_tag_protocol);
2146 int b53_mirror_add(struct dsa_switch *ds, int port,
2147 struct dsa_mall_mirror_tc_entry *mirror, bool ingress,
2148 struct netlink_ext_ack *extack)
2150 struct b53_device *dev = ds->priv;
2151 u16 reg, loc;
2153 if (ingress)
2154 loc = B53_IG_MIR_CTL;
2155 else
2156 loc = B53_EG_MIR_CTL;
2158 b53_read16(dev, B53_MGMT_PAGE, loc, &reg);
2159 reg |= BIT(port);
2160 b53_write16(dev, B53_MGMT_PAGE, loc, reg);
2162 b53_read16(dev, B53_MGMT_PAGE, B53_MIR_CAP_CTL, &reg);
2163 reg &= ~CAP_PORT_MASK;
2164 reg |= mirror->to_local_port;
2165 reg |= MIRROR_EN;
2166 b53_write16(dev, B53_MGMT_PAGE, B53_MIR_CAP_CTL, reg);
2168 return 0;
2170 EXPORT_SYMBOL(b53_mirror_add);
2172 void b53_mirror_del(struct dsa_switch *ds, int port,
2173 struct dsa_mall_mirror_tc_entry *mirror)
2175 struct b53_device *dev = ds->priv;
2176 bool loc_disable = false, other_loc_disable = false;
2177 u16 reg, loc;
2179 if (mirror->ingress)
2180 loc = B53_IG_MIR_CTL;
2181 else
2182 loc = B53_EG_MIR_CTL;
2184 /* Update the desired ingress/egress register */
2185 b53_read16(dev, B53_MGMT_PAGE, loc, &reg);
2186 reg &= ~BIT(port);
2187 if (!(reg & MIRROR_MASK))
2188 loc_disable = true;
2189 b53_write16(dev, B53_MGMT_PAGE, loc, reg);
2191 /* Now look at the other one to know if we can disable mirroring
2192 * entirely
2194 if (mirror->ingress)
2195 b53_read16(dev, B53_MGMT_PAGE, B53_EG_MIR_CTL, &reg);
2196 else
2197 b53_read16(dev, B53_MGMT_PAGE, B53_IG_MIR_CTL, &reg);
2198 if (!(reg & MIRROR_MASK))
2199 other_loc_disable = true;
2201 b53_read16(dev, B53_MGMT_PAGE, B53_MIR_CAP_CTL, &reg);
2202 /* Both no longer have ports, let's disable mirroring */
2203 if (loc_disable && other_loc_disable) {
2204 reg &= ~MIRROR_EN;
2205 reg &= ~mirror->to_local_port;
2207 b53_write16(dev, B53_MGMT_PAGE, B53_MIR_CAP_CTL, reg);
2209 EXPORT_SYMBOL(b53_mirror_del);
2211 /* Returns 0 if EEE was not enabled, or 1 otherwise
2213 int b53_eee_init(struct dsa_switch *ds, int port, struct phy_device *phy)
2215 int ret;
2217 ret = phy_init_eee(phy, false);
2218 if (ret)
2219 return 0;
2221 b53_eee_enable_set(ds, port, true);
2223 return 1;
2225 EXPORT_SYMBOL(b53_eee_init);
2227 int b53_get_mac_eee(struct dsa_switch *ds, int port, struct ethtool_keee *e)
2229 struct b53_device *dev = ds->priv;
2231 if (is5325(dev) || is5365(dev))
2232 return -EOPNOTSUPP;
2234 return 0;
2236 EXPORT_SYMBOL(b53_get_mac_eee);
2238 int b53_set_mac_eee(struct dsa_switch *ds, int port, struct ethtool_keee *e)
2240 struct b53_device *dev = ds->priv;
2241 struct ethtool_keee *p = &dev->ports[port].eee;
2243 if (is5325(dev) || is5365(dev))
2244 return -EOPNOTSUPP;
2246 p->eee_enabled = e->eee_enabled;
2247 b53_eee_enable_set(ds, port, e->eee_enabled);
2249 return 0;
2251 EXPORT_SYMBOL(b53_set_mac_eee);
2253 static int b53_change_mtu(struct dsa_switch *ds, int port, int mtu)
2255 struct b53_device *dev = ds->priv;
2256 bool enable_jumbo;
2257 bool allow_10_100;
2259 if (is5325(dev) || is5365(dev))
2260 return 0;
2262 if (!dsa_is_cpu_port(ds, port))
2263 return 0;
2265 enable_jumbo = (mtu > ETH_DATA_LEN);
2266 allow_10_100 = !is63xx(dev);
2268 return b53_set_jumbo(dev, enable_jumbo, allow_10_100);
2271 static int b53_get_max_mtu(struct dsa_switch *ds, int port)
2273 struct b53_device *dev = ds->priv;
2275 if (is5325(dev) || is5365(dev))
2276 return B53_MAX_MTU_25;
2278 return B53_MAX_MTU;
2281 static const struct phylink_mac_ops b53_phylink_mac_ops = {
2282 .mac_select_pcs = b53_phylink_mac_select_pcs,
2283 .mac_config = b53_phylink_mac_config,
2284 .mac_link_down = b53_phylink_mac_link_down,
2285 .mac_link_up = b53_phylink_mac_link_up,
2288 static const struct dsa_switch_ops b53_switch_ops = {
2289 .get_tag_protocol = b53_get_tag_protocol,
2290 .setup = b53_setup,
2291 .teardown = b53_teardown,
2292 .get_strings = b53_get_strings,
2293 .get_ethtool_stats = b53_get_ethtool_stats,
2294 .get_sset_count = b53_get_sset_count,
2295 .get_ethtool_phy_stats = b53_get_ethtool_phy_stats,
2296 .phy_read = b53_phy_read16,
2297 .phy_write = b53_phy_write16,
2298 .phylink_get_caps = b53_phylink_get_caps,
2299 .port_enable = b53_enable_port,
2300 .port_disable = b53_disable_port,
2301 .get_mac_eee = b53_get_mac_eee,
2302 .set_mac_eee = b53_set_mac_eee,
2303 .port_bridge_join = b53_br_join,
2304 .port_bridge_leave = b53_br_leave,
2305 .port_pre_bridge_flags = b53_br_flags_pre,
2306 .port_bridge_flags = b53_br_flags,
2307 .port_stp_state_set = b53_br_set_stp_state,
2308 .port_fast_age = b53_br_fast_age,
2309 .port_vlan_filtering = b53_vlan_filtering,
2310 .port_vlan_add = b53_vlan_add,
2311 .port_vlan_del = b53_vlan_del,
2312 .port_fdb_dump = b53_fdb_dump,
2313 .port_fdb_add = b53_fdb_add,
2314 .port_fdb_del = b53_fdb_del,
2315 .port_mirror_add = b53_mirror_add,
2316 .port_mirror_del = b53_mirror_del,
2317 .port_mdb_add = b53_mdb_add,
2318 .port_mdb_del = b53_mdb_del,
2319 .port_max_mtu = b53_get_max_mtu,
2320 .port_change_mtu = b53_change_mtu,
2323 struct b53_chip_data {
2324 u32 chip_id;
2325 const char *dev_name;
2326 u16 vlans;
2327 u16 enabled_ports;
2328 u8 imp_port;
2329 u8 cpu_port;
2330 u8 vta_regs[3];
2331 u8 arl_bins;
2332 u16 arl_buckets;
2333 u8 duplex_reg;
2334 u8 jumbo_pm_reg;
2335 u8 jumbo_size_reg;
2338 #define B53_VTA_REGS \
2339 { B53_VT_ACCESS, B53_VT_INDEX, B53_VT_ENTRY }
2340 #define B53_VTA_REGS_9798 \
2341 { B53_VT_ACCESS_9798, B53_VT_INDEX_9798, B53_VT_ENTRY_9798 }
2342 #define B53_VTA_REGS_63XX \
2343 { B53_VT_ACCESS_63XX, B53_VT_INDEX_63XX, B53_VT_ENTRY_63XX }
2345 static const struct b53_chip_data b53_switch_chips[] = {
2347 .chip_id = BCM5325_DEVICE_ID,
2348 .dev_name = "BCM5325",
2349 .vlans = 16,
2350 .enabled_ports = 0x3f,
2351 .arl_bins = 2,
2352 .arl_buckets = 1024,
2353 .imp_port = 5,
2354 .duplex_reg = B53_DUPLEX_STAT_FE,
2357 .chip_id = BCM5365_DEVICE_ID,
2358 .dev_name = "BCM5365",
2359 .vlans = 256,
2360 .enabled_ports = 0x3f,
2361 .arl_bins = 2,
2362 .arl_buckets = 1024,
2363 .imp_port = 5,
2364 .duplex_reg = B53_DUPLEX_STAT_FE,
2367 .chip_id = BCM5389_DEVICE_ID,
2368 .dev_name = "BCM5389",
2369 .vlans = 4096,
2370 .enabled_ports = 0x11f,
2371 .arl_bins = 4,
2372 .arl_buckets = 1024,
2373 .imp_port = 8,
2374 .vta_regs = B53_VTA_REGS,
2375 .duplex_reg = B53_DUPLEX_STAT_GE,
2376 .jumbo_pm_reg = B53_JUMBO_PORT_MASK,
2377 .jumbo_size_reg = B53_JUMBO_MAX_SIZE,
2380 .chip_id = BCM5395_DEVICE_ID,
2381 .dev_name = "BCM5395",
2382 .vlans = 4096,
2383 .enabled_ports = 0x11f,
2384 .arl_bins = 4,
2385 .arl_buckets = 1024,
2386 .imp_port = 8,
2387 .vta_regs = B53_VTA_REGS,
2388 .duplex_reg = B53_DUPLEX_STAT_GE,
2389 .jumbo_pm_reg = B53_JUMBO_PORT_MASK,
2390 .jumbo_size_reg = B53_JUMBO_MAX_SIZE,
2393 .chip_id = BCM5397_DEVICE_ID,
2394 .dev_name = "BCM5397",
2395 .vlans = 4096,
2396 .enabled_ports = 0x11f,
2397 .arl_bins = 4,
2398 .arl_buckets = 1024,
2399 .imp_port = 8,
2400 .vta_regs = B53_VTA_REGS_9798,
2401 .duplex_reg = B53_DUPLEX_STAT_GE,
2402 .jumbo_pm_reg = B53_JUMBO_PORT_MASK,
2403 .jumbo_size_reg = B53_JUMBO_MAX_SIZE,
2406 .chip_id = BCM5398_DEVICE_ID,
2407 .dev_name = "BCM5398",
2408 .vlans = 4096,
2409 .enabled_ports = 0x17f,
2410 .arl_bins = 4,
2411 .arl_buckets = 1024,
2412 .imp_port = 8,
2413 .vta_regs = B53_VTA_REGS_9798,
2414 .duplex_reg = B53_DUPLEX_STAT_GE,
2415 .jumbo_pm_reg = B53_JUMBO_PORT_MASK,
2416 .jumbo_size_reg = B53_JUMBO_MAX_SIZE,
2419 .chip_id = BCM53115_DEVICE_ID,
2420 .dev_name = "BCM53115",
2421 .vlans = 4096,
2422 .enabled_ports = 0x11f,
2423 .arl_bins = 4,
2424 .arl_buckets = 1024,
2425 .vta_regs = B53_VTA_REGS,
2426 .imp_port = 8,
2427 .duplex_reg = B53_DUPLEX_STAT_GE,
2428 .jumbo_pm_reg = B53_JUMBO_PORT_MASK,
2429 .jumbo_size_reg = B53_JUMBO_MAX_SIZE,
2432 .chip_id = BCM53125_DEVICE_ID,
2433 .dev_name = "BCM53125",
2434 .vlans = 4096,
2435 .enabled_ports = 0x1ff,
2436 .arl_bins = 4,
2437 .arl_buckets = 1024,
2438 .imp_port = 8,
2439 .vta_regs = B53_VTA_REGS,
2440 .duplex_reg = B53_DUPLEX_STAT_GE,
2441 .jumbo_pm_reg = B53_JUMBO_PORT_MASK,
2442 .jumbo_size_reg = B53_JUMBO_MAX_SIZE,
2445 .chip_id = BCM53128_DEVICE_ID,
2446 .dev_name = "BCM53128",
2447 .vlans = 4096,
2448 .enabled_ports = 0x1ff,
2449 .arl_bins = 4,
2450 .arl_buckets = 1024,
2451 .imp_port = 8,
2452 .vta_regs = B53_VTA_REGS,
2453 .duplex_reg = B53_DUPLEX_STAT_GE,
2454 .jumbo_pm_reg = B53_JUMBO_PORT_MASK,
2455 .jumbo_size_reg = B53_JUMBO_MAX_SIZE,
2458 .chip_id = BCM63XX_DEVICE_ID,
2459 .dev_name = "BCM63xx",
2460 .vlans = 4096,
2461 .enabled_ports = 0, /* pdata must provide them */
2462 .arl_bins = 4,
2463 .arl_buckets = 1024,
2464 .imp_port = 8,
2465 .vta_regs = B53_VTA_REGS_63XX,
2466 .duplex_reg = B53_DUPLEX_STAT_63XX,
2467 .jumbo_pm_reg = B53_JUMBO_PORT_MASK_63XX,
2468 .jumbo_size_reg = B53_JUMBO_MAX_SIZE_63XX,
2471 .chip_id = BCM63268_DEVICE_ID,
2472 .dev_name = "BCM63268",
2473 .vlans = 4096,
2474 .enabled_ports = 0, /* pdata must provide them */
2475 .arl_bins = 4,
2476 .arl_buckets = 1024,
2477 .imp_port = 8,
2478 .vta_regs = B53_VTA_REGS_63XX,
2479 .duplex_reg = B53_DUPLEX_STAT_63XX,
2480 .jumbo_pm_reg = B53_JUMBO_PORT_MASK_63XX,
2481 .jumbo_size_reg = B53_JUMBO_MAX_SIZE_63XX,
2484 .chip_id = BCM53010_DEVICE_ID,
2485 .dev_name = "BCM53010",
2486 .vlans = 4096,
2487 .enabled_ports = 0x1bf,
2488 .arl_bins = 4,
2489 .arl_buckets = 1024,
2490 .imp_port = 8,
2491 .vta_regs = B53_VTA_REGS,
2492 .duplex_reg = B53_DUPLEX_STAT_GE,
2493 .jumbo_pm_reg = B53_JUMBO_PORT_MASK,
2494 .jumbo_size_reg = B53_JUMBO_MAX_SIZE,
2497 .chip_id = BCM53011_DEVICE_ID,
2498 .dev_name = "BCM53011",
2499 .vlans = 4096,
2500 .enabled_ports = 0x1bf,
2501 .arl_bins = 4,
2502 .arl_buckets = 1024,
2503 .imp_port = 8,
2504 .vta_regs = B53_VTA_REGS,
2505 .duplex_reg = B53_DUPLEX_STAT_GE,
2506 .jumbo_pm_reg = B53_JUMBO_PORT_MASK,
2507 .jumbo_size_reg = B53_JUMBO_MAX_SIZE,
2510 .chip_id = BCM53012_DEVICE_ID,
2511 .dev_name = "BCM53012",
2512 .vlans = 4096,
2513 .enabled_ports = 0x1bf,
2514 .arl_bins = 4,
2515 .arl_buckets = 1024,
2516 .imp_port = 8,
2517 .vta_regs = B53_VTA_REGS,
2518 .duplex_reg = B53_DUPLEX_STAT_GE,
2519 .jumbo_pm_reg = B53_JUMBO_PORT_MASK,
2520 .jumbo_size_reg = B53_JUMBO_MAX_SIZE,
2523 .chip_id = BCM53018_DEVICE_ID,
2524 .dev_name = "BCM53018",
2525 .vlans = 4096,
2526 .enabled_ports = 0x1bf,
2527 .arl_bins = 4,
2528 .arl_buckets = 1024,
2529 .imp_port = 8,
2530 .vta_regs = B53_VTA_REGS,
2531 .duplex_reg = B53_DUPLEX_STAT_GE,
2532 .jumbo_pm_reg = B53_JUMBO_PORT_MASK,
2533 .jumbo_size_reg = B53_JUMBO_MAX_SIZE,
2536 .chip_id = BCM53019_DEVICE_ID,
2537 .dev_name = "BCM53019",
2538 .vlans = 4096,
2539 .enabled_ports = 0x1bf,
2540 .arl_bins = 4,
2541 .arl_buckets = 1024,
2542 .imp_port = 8,
2543 .vta_regs = B53_VTA_REGS,
2544 .duplex_reg = B53_DUPLEX_STAT_GE,
2545 .jumbo_pm_reg = B53_JUMBO_PORT_MASK,
2546 .jumbo_size_reg = B53_JUMBO_MAX_SIZE,
2549 .chip_id = BCM58XX_DEVICE_ID,
2550 .dev_name = "BCM585xx/586xx/88312",
2551 .vlans = 4096,
2552 .enabled_ports = 0x1ff,
2553 .arl_bins = 4,
2554 .arl_buckets = 1024,
2555 .imp_port = 8,
2556 .vta_regs = B53_VTA_REGS,
2557 .duplex_reg = B53_DUPLEX_STAT_GE,
2558 .jumbo_pm_reg = B53_JUMBO_PORT_MASK,
2559 .jumbo_size_reg = B53_JUMBO_MAX_SIZE,
2562 .chip_id = BCM583XX_DEVICE_ID,
2563 .dev_name = "BCM583xx/11360",
2564 .vlans = 4096,
2565 .enabled_ports = 0x103,
2566 .arl_bins = 4,
2567 .arl_buckets = 1024,
2568 .imp_port = 8,
2569 .vta_regs = B53_VTA_REGS,
2570 .duplex_reg = B53_DUPLEX_STAT_GE,
2571 .jumbo_pm_reg = B53_JUMBO_PORT_MASK,
2572 .jumbo_size_reg = B53_JUMBO_MAX_SIZE,
2574 /* Starfighter 2 */
2576 .chip_id = BCM4908_DEVICE_ID,
2577 .dev_name = "BCM4908",
2578 .vlans = 4096,
2579 .enabled_ports = 0x1bf,
2580 .arl_bins = 4,
2581 .arl_buckets = 256,
2582 .imp_port = 8,
2583 .vta_regs = B53_VTA_REGS,
2584 .duplex_reg = B53_DUPLEX_STAT_GE,
2585 .jumbo_pm_reg = B53_JUMBO_PORT_MASK,
2586 .jumbo_size_reg = B53_JUMBO_MAX_SIZE,
2589 .chip_id = BCM7445_DEVICE_ID,
2590 .dev_name = "BCM7445",
2591 .vlans = 4096,
2592 .enabled_ports = 0x1ff,
2593 .arl_bins = 4,
2594 .arl_buckets = 1024,
2595 .imp_port = 8,
2596 .vta_regs = B53_VTA_REGS,
2597 .duplex_reg = B53_DUPLEX_STAT_GE,
2598 .jumbo_pm_reg = B53_JUMBO_PORT_MASK,
2599 .jumbo_size_reg = B53_JUMBO_MAX_SIZE,
2602 .chip_id = BCM7278_DEVICE_ID,
2603 .dev_name = "BCM7278",
2604 .vlans = 4096,
2605 .enabled_ports = 0x1ff,
2606 .arl_bins = 4,
2607 .arl_buckets = 256,
2608 .imp_port = 8,
2609 .vta_regs = B53_VTA_REGS,
2610 .duplex_reg = B53_DUPLEX_STAT_GE,
2611 .jumbo_pm_reg = B53_JUMBO_PORT_MASK,
2612 .jumbo_size_reg = B53_JUMBO_MAX_SIZE,
2615 .chip_id = BCM53134_DEVICE_ID,
2616 .dev_name = "BCM53134",
2617 .vlans = 4096,
2618 .enabled_ports = 0x12f,
2619 .imp_port = 8,
2620 .cpu_port = B53_CPU_PORT,
2621 .vta_regs = B53_VTA_REGS,
2622 .arl_bins = 4,
2623 .arl_buckets = 1024,
2624 .duplex_reg = B53_DUPLEX_STAT_GE,
2625 .jumbo_pm_reg = B53_JUMBO_PORT_MASK,
2626 .jumbo_size_reg = B53_JUMBO_MAX_SIZE,
2630 static int b53_switch_init(struct b53_device *dev)
2632 unsigned int i;
2633 int ret;
2635 for (i = 0; i < ARRAY_SIZE(b53_switch_chips); i++) {
2636 const struct b53_chip_data *chip = &b53_switch_chips[i];
2638 if (chip->chip_id == dev->chip_id) {
2639 if (!dev->enabled_ports)
2640 dev->enabled_ports = chip->enabled_ports;
2641 dev->name = chip->dev_name;
2642 dev->duplex_reg = chip->duplex_reg;
2643 dev->vta_regs[0] = chip->vta_regs[0];
2644 dev->vta_regs[1] = chip->vta_regs[1];
2645 dev->vta_regs[2] = chip->vta_regs[2];
2646 dev->jumbo_pm_reg = chip->jumbo_pm_reg;
2647 dev->imp_port = chip->imp_port;
2648 dev->num_vlans = chip->vlans;
2649 dev->num_arl_bins = chip->arl_bins;
2650 dev->num_arl_buckets = chip->arl_buckets;
2651 break;
2655 /* check which BCM5325x version we have */
2656 if (is5325(dev)) {
2657 u8 vc4;
2659 b53_read8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL4_25, &vc4);
2661 /* check reserved bits */
2662 switch (vc4 & 3) {
2663 case 1:
2664 /* BCM5325E */
2665 break;
2666 case 3:
2667 /* BCM5325F - do not use port 4 */
2668 dev->enabled_ports &= ~BIT(4);
2669 break;
2670 default:
2671 /* On the BCM47XX SoCs this is the supported internal switch.*/
2672 #ifndef CONFIG_BCM47XX
2673 /* BCM5325M */
2674 return -EINVAL;
2675 #else
2676 break;
2677 #endif
2681 dev->num_ports = fls(dev->enabled_ports);
2683 dev->ds->num_ports = min_t(unsigned int, dev->num_ports, DSA_MAX_PORTS);
2685 /* Include non standard CPU port built-in PHYs to be probed */
2686 if (is539x(dev) || is531x5(dev)) {
2687 for (i = 0; i < dev->num_ports; i++) {
2688 if (!(dev->ds->phys_mii_mask & BIT(i)) &&
2689 !b53_possible_cpu_port(dev->ds, i))
2690 dev->ds->phys_mii_mask |= BIT(i);
2694 dev->ports = devm_kcalloc(dev->dev,
2695 dev->num_ports, sizeof(struct b53_port),
2696 GFP_KERNEL);
2697 if (!dev->ports)
2698 return -ENOMEM;
2700 dev->vlans = devm_kcalloc(dev->dev,
2701 dev->num_vlans, sizeof(struct b53_vlan),
2702 GFP_KERNEL);
2703 if (!dev->vlans)
2704 return -ENOMEM;
2706 dev->reset_gpio = b53_switch_get_reset_gpio(dev);
2707 if (dev->reset_gpio >= 0) {
2708 ret = devm_gpio_request_one(dev->dev, dev->reset_gpio,
2709 GPIOF_OUT_INIT_HIGH, "robo_reset");
2710 if (ret)
2711 return ret;
2714 return 0;
2717 struct b53_device *b53_switch_alloc(struct device *base,
2718 const struct b53_io_ops *ops,
2719 void *priv)
2721 struct dsa_switch *ds;
2722 struct b53_device *dev;
2724 ds = devm_kzalloc(base, sizeof(*ds), GFP_KERNEL);
2725 if (!ds)
2726 return NULL;
2728 ds->dev = base;
2730 dev = devm_kzalloc(base, sizeof(*dev), GFP_KERNEL);
2731 if (!dev)
2732 return NULL;
2734 ds->priv = dev;
2735 dev->dev = base;
2737 dev->ds = ds;
2738 dev->priv = priv;
2739 dev->ops = ops;
2740 ds->ops = &b53_switch_ops;
2741 ds->phylink_mac_ops = &b53_phylink_mac_ops;
2742 dev->vlan_enabled = true;
2743 /* Let DSA handle the case were multiple bridges span the same switch
2744 * device and different VLAN awareness settings are requested, which
2745 * would be breaking filtering semantics for any of the other bridge
2746 * devices. (not hardware supported)
2748 ds->vlan_filtering_is_global = true;
2750 mutex_init(&dev->reg_mutex);
2751 mutex_init(&dev->stats_mutex);
2752 mutex_init(&dev->arl_mutex);
2754 return dev;
2756 EXPORT_SYMBOL(b53_switch_alloc);
2758 int b53_switch_detect(struct b53_device *dev)
2760 u32 id32;
2761 u16 tmp;
2762 u8 id8;
2763 int ret;
2765 ret = b53_read8(dev, B53_MGMT_PAGE, B53_DEVICE_ID, &id8);
2766 if (ret)
2767 return ret;
2769 switch (id8) {
2770 case 0:
2771 /* BCM5325 and BCM5365 do not have this register so reads
2772 * return 0. But the read operation did succeed, so assume this
2773 * is one of them.
2775 * Next check if we can write to the 5325's VTA register; for
2776 * 5365 it is read only.
2778 b53_write16(dev, B53_VLAN_PAGE, B53_VLAN_TABLE_ACCESS_25, 0xf);
2779 b53_read16(dev, B53_VLAN_PAGE, B53_VLAN_TABLE_ACCESS_25, &tmp);
2781 if (tmp == 0xf)
2782 dev->chip_id = BCM5325_DEVICE_ID;
2783 else
2784 dev->chip_id = BCM5365_DEVICE_ID;
2785 break;
2786 case BCM5389_DEVICE_ID:
2787 case BCM5395_DEVICE_ID:
2788 case BCM5397_DEVICE_ID:
2789 case BCM5398_DEVICE_ID:
2790 dev->chip_id = id8;
2791 break;
2792 default:
2793 ret = b53_read32(dev, B53_MGMT_PAGE, B53_DEVICE_ID, &id32);
2794 if (ret)
2795 return ret;
2797 switch (id32) {
2798 case BCM53115_DEVICE_ID:
2799 case BCM53125_DEVICE_ID:
2800 case BCM53128_DEVICE_ID:
2801 case BCM53010_DEVICE_ID:
2802 case BCM53011_DEVICE_ID:
2803 case BCM53012_DEVICE_ID:
2804 case BCM53018_DEVICE_ID:
2805 case BCM53019_DEVICE_ID:
2806 case BCM53134_DEVICE_ID:
2807 dev->chip_id = id32;
2808 break;
2809 default:
2810 dev_err(dev->dev,
2811 "unsupported switch detected (BCM53%02x/BCM%x)\n",
2812 id8, id32);
2813 return -ENODEV;
2817 if (dev->chip_id == BCM5325_DEVICE_ID)
2818 return b53_read8(dev, B53_STAT_PAGE, B53_REV_ID_25,
2819 &dev->core_rev);
2820 else
2821 return b53_read8(dev, B53_MGMT_PAGE, B53_REV_ID,
2822 &dev->core_rev);
2824 EXPORT_SYMBOL(b53_switch_detect);
2826 int b53_switch_register(struct b53_device *dev)
2828 int ret;
2830 if (dev->pdata) {
2831 dev->chip_id = dev->pdata->chip_id;
2832 dev->enabled_ports = dev->pdata->enabled_ports;
2835 if (!dev->chip_id && b53_switch_detect(dev))
2836 return -EINVAL;
2838 ret = b53_switch_init(dev);
2839 if (ret)
2840 return ret;
2842 dev_info(dev->dev, "found switch: %s, rev %i\n",
2843 dev->name, dev->core_rev);
2845 return dsa_register_switch(dev->ds);
2847 EXPORT_SYMBOL(b53_switch_register);
2849 MODULE_AUTHOR("Jonas Gorski <jogo@openwrt.org>");
2850 MODULE_DESCRIPTION("B53 switch library");
2851 MODULE_LICENSE("Dual BSD/GPL");