?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
Revert "unicode: Don't special case ignorable code points"
[linux.git] / drivers / net / dsa / sja1105 / sja1105_spi.c
blob834b5c1b4db0cbeb180d0c6118d589e4a5bba292
1 // SPDX-License-Identifier: BSD-3-Clause
2 /* Copyright 2016-2018 NXP
3 * Copyright (c) 2018, Sensor-Technik Wiedemann GmbH
4 * Copyright (c) 2018-2019, Vladimir Oltean <olteanv@gmail.com>
5 */
6 #include <linux/spi/spi.h>
7 #include <linux/packing.h>
8 #include "sja1105.h"
9
10 struct sja1105_chunk {
11 u8 *buf;
12 size_t len;
13 u64 reg_addr;
14 };
15
16 static void
17 sja1105_spi_message_pack(void *buf, const struct sja1105_spi_message *msg)
18 {
19 const int size = SJA1105_SIZE_SPI_MSG_HEADER;
20
21 memset(buf, 0, size);
22
23 sja1105_pack(buf, &msg->access, 31, 31, size);
24 sja1105_pack(buf, &msg->read_count, 30, 25, size);
25 sja1105_pack(buf, &msg->address, 24, 4, size);
26 }
27
28 /* If @rw is:
29 * - SPI_WRITE: creates and sends an SPI write message at absolute
30 * address reg_addr, taking @len bytes from *buf
31 * - SPI_READ: creates and sends an SPI read message from absolute
32 * address reg_addr, writing @len bytes into *buf
33 */
34 static int sja1105_xfer(const struct sja1105_private *priv,
35 sja1105_spi_rw_mode_t rw, u64 reg_addr, u8 *buf,
36 size_t len, struct ptp_system_timestamp *ptp_sts)
37 {
38 u8 hdr_buf[SJA1105_SIZE_SPI_MSG_HEADER] = {0};
39 struct spi_device *spi = priv->spidev;
40 struct spi_transfer xfers[2] = {0};
41 struct spi_transfer *chunk_xfer;
42 struct spi_transfer *hdr_xfer;
43 struct sja1105_chunk chunk;
44 int num_chunks;
45 int rc, i = 0;
46
47 num_chunks = DIV_ROUND_UP(len, priv->max_xfer_len);
48
49 chunk.reg_addr = reg_addr;
50 chunk.buf = buf;
51 chunk.len = min_t(size_t, len, priv->max_xfer_len);
52
53 hdr_xfer = &xfers[0];
54 chunk_xfer = &xfers[1];
55
56 for (i = 0; i < num_chunks; i++) {
57 struct spi_transfer *ptp_sts_xfer;
58 struct sja1105_spi_message msg;
59
60 /* Populate the transfer's header buffer */
61 msg.address = chunk.reg_addr;
62 msg.access = rw;
63 if (rw == SPI_READ)
64 msg.read_count = chunk.len / 4;
65 else
66 /* Ignored */
67 msg.read_count = 0;
68 sja1105_spi_message_pack(hdr_buf, &msg);
69 hdr_xfer->tx_buf = hdr_buf;
70 hdr_xfer->len = SJA1105_SIZE_SPI_MSG_HEADER;
71
72 /* Populate the transfer's data buffer */
73 if (rw == SPI_READ)
74 chunk_xfer->rx_buf = chunk.buf;
75 else
76 chunk_xfer->tx_buf = chunk.buf;
77 chunk_xfer->len = chunk.len;
78
79 /* Request timestamping for the transfer. Instead of letting
80 * callers specify which byte they want to timestamp, we can
81 * make certain assumptions:
82 * - A read operation will request a software timestamp when
83 * what's being read is the PTP time. That is snapshotted by
84 * the switch hardware at the end of the command portion
85 * (hdr_xfer).
86 * - A write operation will request a software timestamp on
87 * actions that modify the PTP time. Taking clock stepping as
88 * an example, the switch writes the PTP time at the end of
89 * the data portion (chunk_xfer).
90 */
91 if (rw == SPI_READ)
92 ptp_sts_xfer = hdr_xfer;
93 else
94 ptp_sts_xfer = chunk_xfer;
95 ptp_sts_xfer->ptp_sts_word_pre = ptp_sts_xfer->len - 1;
96 ptp_sts_xfer->ptp_sts_word_post = ptp_sts_xfer->len - 1;
97 ptp_sts_xfer->ptp_sts = ptp_sts;
98
99 /* Calculate next chunk */
100 chunk.buf += chunk.len;
101 chunk.reg_addr += chunk.len / 4;
102 chunk.len = min_t(size_t, (ptrdiff_t)(buf + len - chunk.buf),
103 priv->max_xfer_len);
104
105 rc = spi_sync_transfer(spi, xfers, 2);
106 if (rc < 0) {
107 dev_err(&spi->dev, "SPI transfer failed: %d\n", rc);
108 return rc;
109 }
110 }
111
112 return 0;
113 }
114
115 int sja1105_xfer_buf(const struct sja1105_private *priv,
116 sja1105_spi_rw_mode_t rw, u64 reg_addr,
117 u8 *buf, size_t len)
118 {
119 return sja1105_xfer(priv, rw, reg_addr, buf, len, NULL);
120 }
121
122 /* If @rw is:
123 * - SPI_WRITE: creates and sends an SPI write message at absolute
124 * address reg_addr
125 * - SPI_READ: creates and sends an SPI read message from absolute
126 * address reg_addr
127 *
128 * The u64 *value is unpacked, meaning that it's stored in the native
129 * CPU endianness and directly usable by software running on the core.
130 */
131 int sja1105_xfer_u64(const struct sja1105_private *priv,
132 sja1105_spi_rw_mode_t rw, u64 reg_addr, u64 *value,
133 struct ptp_system_timestamp *ptp_sts)
134 {
135 u8 packed_buf[8];
136 int rc;
137
138 if (rw == SPI_WRITE)
139 sja1105_pack(packed_buf, value, 63, 0, 8);
140
141 rc = sja1105_xfer(priv, rw, reg_addr, packed_buf, 8, ptp_sts);
142
143 if (rw == SPI_READ)
144 sja1105_unpack(packed_buf, value, 63, 0, 8);
145
146 return rc;
147 }
148
149 /* Same as above, but transfers only a 4 byte word */
150 int sja1105_xfer_u32(const struct sja1105_private *priv,
151 sja1105_spi_rw_mode_t rw, u64 reg_addr, u32 *value,
152 struct ptp_system_timestamp *ptp_sts)
153 {
154 u8 packed_buf[4];
155 u64 tmp;
156 int rc;
157
158 if (rw == SPI_WRITE) {
159 /* The packing API only supports u64 as CPU word size,
160 * so we need to convert.
161 */
162 tmp = *value;
163 sja1105_pack(packed_buf, &tmp, 31, 0, 4);
164 }
165
166 rc = sja1105_xfer(priv, rw, reg_addr, packed_buf, 4, ptp_sts);
167
168 if (rw == SPI_READ) {
169 sja1105_unpack(packed_buf, &tmp, 31, 0, 4);
170 *value = tmp;
171 }
172
173 return rc;
174 }
175
176 static int sja1105et_reset_cmd(struct dsa_switch *ds)
177 {
178 struct sja1105_private *priv = ds->priv;
179 const struct sja1105_regs *regs = priv->info->regs;
180 u32 cold_reset = BIT(3);
181
182 /* Cold reset */
183 return sja1105_xfer_u32(priv, SPI_WRITE, regs->rgu, &cold_reset, NULL);
184 }
185
186 static int sja1105pqrs_reset_cmd(struct dsa_switch *ds)
187 {
188 struct sja1105_private *priv = ds->priv;
189 const struct sja1105_regs *regs = priv->info->regs;
190 u32 cold_reset = BIT(2);
191
192 /* Cold reset */
193 return sja1105_xfer_u32(priv, SPI_WRITE, regs->rgu, &cold_reset, NULL);
194 }
195
196 static int sja1110_reset_cmd(struct dsa_switch *ds)
197 {
198 struct sja1105_private *priv = ds->priv;
199 const struct sja1105_regs *regs = priv->info->regs;
200 u32 switch_reset = BIT(20);
201
202 /* Only reset the switch core.
203 * A full cold reset would re-enable the BASE_MCSS_CLOCK PLL which
204 * would turn on the microcontroller, potentially letting it execute
205 * code which could interfere with our configuration.
206 */
207 return sja1105_xfer_u32(priv, SPI_WRITE, regs->rgu, &switch_reset, NULL);
208 }
209
210 int sja1105_inhibit_tx(const struct sja1105_private *priv,
211 unsigned long port_bitmap, bool tx_inhibited)
212 {
213 const struct sja1105_regs *regs = priv->info->regs;
214 u32 inhibit_cmd;
215 int rc;
216
217 rc = sja1105_xfer_u32(priv, SPI_READ, regs->port_control,
218 &inhibit_cmd, NULL);
219 if (rc < 0)
220 return rc;
221
222 if (tx_inhibited)
223 inhibit_cmd |= port_bitmap;
224 else
225 inhibit_cmd &= ~port_bitmap;
226
227 return sja1105_xfer_u32(priv, SPI_WRITE, regs->port_control,
228 &inhibit_cmd, NULL);
229 }
230
231 struct sja1105_status {
232 u64 configs;
233 u64 crcchkl;
234 u64 ids;
235 u64 crcchkg;
236 };
237
238 /* This is not reading the entire General Status area, which is also
239 * divergent between E/T and P/Q/R/S, but only the relevant bits for
240 * ensuring that the static config upload procedure was successful.
241 */
242 static void sja1105_status_unpack(void *buf, struct sja1105_status *status)
243 {
244 /* So that addition translates to 4 bytes */
245 u32 *p = buf;
246
247 /* device_id is missing from the buffer, but we don't
248 * want to diverge from the manual definition of the
249 * register addresses, so we'll back off one step with
250 * the register pointer, and never access p[0].
251 */
252 p--;
253 sja1105_unpack(p + 0x1, &status->configs, 31, 31, 4);
254 sja1105_unpack(p + 0x1, &status->crcchkl, 30, 30, 4);
255 sja1105_unpack(p + 0x1, &status->ids, 29, 29, 4);
256 sja1105_unpack(p + 0x1, &status->crcchkg, 28, 28, 4);
257 }
258
259 static int sja1105_status_get(struct sja1105_private *priv,
260 struct sja1105_status *status)
261 {
262 const struct sja1105_regs *regs = priv->info->regs;
263 u8 packed_buf[4];
264 int rc;
265
266 rc = sja1105_xfer_buf(priv, SPI_READ, regs->status, packed_buf, 4);
267 if (rc < 0)
268 return rc;
269
270 sja1105_status_unpack(packed_buf, status);
271
272 return 0;
273 }
274
275 /* Not const because unpacking priv->static_config into buffers and preparing
276 * for upload requires the recalculation of table CRCs and updating the
277 * structures with these.
278 */
279 int static_config_buf_prepare_for_upload(struct sja1105_private *priv,
280 void *config_buf, int buf_len)
281 {
282 struct sja1105_static_config *config = &priv->static_config;
283 struct sja1105_table_header final_header;
284 sja1105_config_valid_t valid;
285 char *final_header_ptr;
286 int crc_len;
287
288 valid = sja1105_static_config_check_valid(config,
289 priv->info->max_frame_mem);
290 if (valid != SJA1105_CONFIG_OK) {
291 dev_err(&priv->spidev->dev,
292 sja1105_static_config_error_msg[valid]);
293 return -EINVAL;
294 }
295
296 /* Write Device ID and config tables to config_buf */
297 sja1105_static_config_pack(config_buf, config);
298 /* Recalculate CRC of the last header (right now 0xDEADBEEF).
299 * Don't include the CRC field itself.
300 */
301 crc_len = buf_len - 4;
302 /* Read the whole table header */
303 final_header_ptr = config_buf + buf_len - SJA1105_SIZE_TABLE_HEADER;
304 sja1105_table_header_packing(final_header_ptr, &final_header, UNPACK);
305 /* Modify */
306 final_header.crc = sja1105_crc32(config_buf, crc_len);
307 /* Rewrite */
308 sja1105_table_header_packing(final_header_ptr, &final_header, PACK);
309
310 return 0;
311 }
312
313 #define RETRIES 10
314
315 int sja1105_static_config_upload(struct sja1105_private *priv)
316 {
317 struct sja1105_static_config *config = &priv->static_config;
318 const struct sja1105_regs *regs = priv->info->regs;
319 struct device *dev = &priv->spidev->dev;
320 struct dsa_switch *ds = priv->ds;
321 struct sja1105_status status;
322 int rc, retries = RETRIES;
323 u8 *config_buf;
324 int buf_len;
325
326 buf_len = sja1105_static_config_get_length(config);
327 config_buf = kcalloc(buf_len, sizeof(char), GFP_KERNEL);
328 if (!config_buf)
329 return -ENOMEM;
330
331 rc = static_config_buf_prepare_for_upload(priv, config_buf, buf_len);
332 if (rc < 0) {
333 dev_err(dev, "Invalid config, cannot upload\n");
334 rc = -EINVAL;
335 goto out;
336 }
337 /* Prevent PHY jabbering during switch reset by inhibiting
338 * Tx on all ports and waiting for current packet to drain.
339 * Otherwise, the PHY will see an unterminated Ethernet packet.
340 */
341 rc = sja1105_inhibit_tx(priv, GENMASK_ULL(ds->num_ports - 1, 0), true);
342 if (rc < 0) {
343 dev_err(dev, "Failed to inhibit Tx on ports\n");
344 rc = -ENXIO;
345 goto out;
346 }
347 /* Wait for an eventual egress packet to finish transmission
348 * (reach IFG). It is guaranteed that a second one will not
349 * follow, and that switch cold reset is thus safe
350 */
351 usleep_range(500, 1000);
352 do {
353 /* Put the SJA1105 in programming mode */
354 rc = priv->info->reset_cmd(priv->ds);
355 if (rc < 0) {
356 dev_err(dev, "Failed to reset switch, retrying...\n");
357 continue;
358 }
359 /* Wait for the switch to come out of reset */
360 usleep_range(1000, 5000);
361 /* Upload the static config to the device */
362 rc = sja1105_xfer_buf(priv, SPI_WRITE, regs->config,
363 config_buf, buf_len);
364 if (rc < 0) {
365 dev_err(dev, "Failed to upload config, retrying...\n");
366 continue;
367 }
368 /* Check that SJA1105 responded well to the config upload */
369 rc = sja1105_status_get(priv, &status);
370 if (rc < 0)
371 continue;
372
373 if (status.ids == 1) {
374 dev_err(dev, "Mismatch between hardware and static config "
375 "device id. Wrote 0x%llx, wants 0x%llx\n",
376 config->device_id, priv->info->device_id);
377 continue;
378 }
379 if (status.crcchkl == 1) {
380 dev_err(dev, "Switch reported invalid local CRC on "
381 "the uploaded config, retrying...\n");
382 continue;
383 }
384 if (status.crcchkg == 1) {
385 dev_err(dev, "Switch reported invalid global CRC on "
386 "the uploaded config, retrying...\n");
387 continue;
388 }
389 if (status.configs == 0) {
390 dev_err(dev, "Switch reported that configuration is "
391 "invalid, retrying...\n");
392 continue;
393 }
394 /* Success! */
395 break;
396 } while (--retries);
397
398 if (!retries) {
399 rc = -EIO;
400 dev_err(dev, "Failed to upload config to device, giving up\n");
401 goto out;
402 } else if (retries != RETRIES) {
403 dev_info(dev, "Succeeded after %d tried\n", RETRIES - retries);
404 }
405
406 out:
407 kfree(config_buf);
408 return rc;
409 }
410
411 static const struct sja1105_regs sja1105et_regs = {
412 .device_id = 0x0,
413 .prod_id = 0x100BC3,
414 .status = 0x1,
415 .port_control = 0x11,
416 .vl_status = 0x10000,
417 .config = 0x020000,
418 .rgu = 0x100440,
419 /* UM10944.pdf, Table 86, ACU Register overview */
420 .pad_mii_tx = {0x100800, 0x100802, 0x100804, 0x100806, 0x100808},
421 .pad_mii_rx = {0x100801, 0x100803, 0x100805, 0x100807, 0x100809},
422 .rmii_pll1 = 0x10000A,
423 .cgu_idiv = {0x10000B, 0x10000C, 0x10000D, 0x10000E, 0x10000F},
424 .stats[MAC] = {0x200, 0x202, 0x204, 0x206, 0x208},
425 .stats[HL1] = {0x400, 0x410, 0x420, 0x430, 0x440},
426 .stats[HL2] = {0x600, 0x610, 0x620, 0x630, 0x640},
427 /* UM10944.pdf, Table 78, CGU Register overview */
428 .mii_tx_clk = {0x100013, 0x10001A, 0x100021, 0x100028, 0x10002F},
429 .mii_rx_clk = {0x100014, 0x10001B, 0x100022, 0x100029, 0x100030},
430 .mii_ext_tx_clk = {0x100018, 0x10001F, 0x100026, 0x10002D, 0x100034},
431 .mii_ext_rx_clk = {0x100019, 0x100020, 0x100027, 0x10002E, 0x100035},
432 .rgmii_tx_clk = {0x100016, 0x10001D, 0x100024, 0x10002B, 0x100032},
433 .rmii_ref_clk = {0x100015, 0x10001C, 0x100023, 0x10002A, 0x100031},
434 .rmii_ext_tx_clk = {0x100018, 0x10001F, 0x100026, 0x10002D, 0x100034},
435 .ptpegr_ts = {0xC0, 0xC2, 0xC4, 0xC6, 0xC8},
436 .ptpschtm = 0x12, /* Spans 0x12 to 0x13 */
437 .ptppinst = 0x14,
438 .ptppindur = 0x16,
439 .ptp_control = 0x17,
440 .ptpclkval = 0x18, /* Spans 0x18 to 0x19 */
441 .ptpclkrate = 0x1A,
442 .ptpclkcorp = 0x1D,
443 .mdio_100base_tx = SJA1105_RSV_ADDR,
444 .mdio_100base_t1 = SJA1105_RSV_ADDR,
445 };
446
447 static const struct sja1105_regs sja1105pqrs_regs = {
448 .device_id = 0x0,
449 .prod_id = 0x100BC3,
450 .status = 0x1,
451 .port_control = 0x12,
452 .vl_status = 0x10000,
453 .config = 0x020000,
454 .rgu = 0x100440,
455 /* UM10944.pdf, Table 86, ACU Register overview */
456 .pad_mii_tx = {0x100800, 0x100802, 0x100804, 0x100806, 0x100808},
457 .pad_mii_rx = {0x100801, 0x100803, 0x100805, 0x100807, 0x100809},
458 .pad_mii_id = {0x100810, 0x100811, 0x100812, 0x100813, 0x100814},
459 .rmii_pll1 = 0x10000A,
460 .cgu_idiv = {0x10000B, 0x10000C, 0x10000D, 0x10000E, 0x10000F},
461 .stats[MAC] = {0x200, 0x202, 0x204, 0x206, 0x208},
462 .stats[HL1] = {0x400, 0x410, 0x420, 0x430, 0x440},
463 .stats[HL2] = {0x600, 0x610, 0x620, 0x630, 0x640},
464 .stats[ETHER] = {0x1400, 0x1418, 0x1430, 0x1448, 0x1460},
465 /* UM11040.pdf, Table 114 */
466 .mii_tx_clk = {0x100013, 0x100019, 0x10001F, 0x100025, 0x10002B},
467 .mii_rx_clk = {0x100014, 0x10001A, 0x100020, 0x100026, 0x10002C},
468 .mii_ext_tx_clk = {0x100017, 0x10001D, 0x100023, 0x100029, 0x10002F},
469 .mii_ext_rx_clk = {0x100018, 0x10001E, 0x100024, 0x10002A, 0x100030},
470 .rgmii_tx_clk = {0x100016, 0x10001C, 0x100022, 0x100028, 0x10002E},
471 .rmii_ref_clk = {0x100015, 0x10001B, 0x100021, 0x100027, 0x10002D},
472 .rmii_ext_tx_clk = {0x100017, 0x10001D, 0x100023, 0x100029, 0x10002F},
473 .ptpegr_ts = {0xC0, 0xC4, 0xC8, 0xCC, 0xD0},
474 .ptpschtm = 0x13, /* Spans 0x13 to 0x14 */
475 .ptppinst = 0x15,
476 .ptppindur = 0x17,
477 .ptp_control = 0x18,
478 .ptpclkval = 0x19,
479 .ptpclkrate = 0x1B,
480 .ptpclkcorp = 0x1E,
481 .ptpsyncts = 0x1F,
482 .mdio_100base_tx = SJA1105_RSV_ADDR,
483 .mdio_100base_t1 = SJA1105_RSV_ADDR,
484 };
485
486 static const struct sja1105_regs sja1110_regs = {
487 .device_id = SJA1110_SPI_ADDR(0x0),
488 .prod_id = SJA1110_ACU_ADDR(0xf00),
489 .status = SJA1110_SPI_ADDR(0x4),
490 .port_control = SJA1110_SPI_ADDR(0x50), /* actually INHIB_TX */
491 .vl_status = 0x10000,
492 .config = 0x020000,
493 .rgu = SJA1110_RGU_ADDR(0x100), /* Reset Control Register 0 */
494 /* Ports 2 and 3 are capable of xMII, but there isn't anything to
495 * configure in the CGU/ACU for them.
496 */
497 .pad_mii_tx = {SJA1105_RSV_ADDR, SJA1105_RSV_ADDR,
498 SJA1105_RSV_ADDR, SJA1105_RSV_ADDR,
499 SJA1105_RSV_ADDR, SJA1105_RSV_ADDR,
500 SJA1105_RSV_ADDR, SJA1105_RSV_ADDR,
501 SJA1105_RSV_ADDR, SJA1105_RSV_ADDR,
502 SJA1105_RSV_ADDR},
503 .pad_mii_rx = {SJA1105_RSV_ADDR, SJA1105_RSV_ADDR,
504 SJA1105_RSV_ADDR, SJA1105_RSV_ADDR,
505 SJA1105_RSV_ADDR, SJA1105_RSV_ADDR,
506 SJA1105_RSV_ADDR, SJA1105_RSV_ADDR,
507 SJA1105_RSV_ADDR, SJA1105_RSV_ADDR,
508 SJA1105_RSV_ADDR},
509 .pad_mii_id = {SJA1105_RSV_ADDR, SJA1105_RSV_ADDR,
510 SJA1110_ACU_ADDR(0x18), SJA1110_ACU_ADDR(0x28),
511 SJA1105_RSV_ADDR, SJA1105_RSV_ADDR,
512 SJA1105_RSV_ADDR, SJA1105_RSV_ADDR,
513 SJA1105_RSV_ADDR, SJA1105_RSV_ADDR,
514 SJA1105_RSV_ADDR},
515 .rmii_pll1 = SJA1105_RSV_ADDR,
516 .cgu_idiv = {SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, SJA1105_RSV_ADDR,
517 SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, SJA1105_RSV_ADDR,
518 SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, SJA1105_RSV_ADDR,
519 SJA1105_RSV_ADDR, SJA1105_RSV_ADDR},
520 .stats[MAC] = {0x200, 0x202, 0x204, 0x206, 0x208, 0x20a,
521 0x20c, 0x20e, 0x210, 0x212, 0x214},
522 .stats[HL1] = {0x400, 0x410, 0x420, 0x430, 0x440, 0x450,
523 0x460, 0x470, 0x480, 0x490, 0x4a0},
524 .stats[HL2] = {0x600, 0x610, 0x620, 0x630, 0x640, 0x650,
525 0x660, 0x670, 0x680, 0x690, 0x6a0},
526 .stats[ETHER] = {0x1400, 0x1418, 0x1430, 0x1448, 0x1460, 0x1478,
527 0x1490, 0x14a8, 0x14c0, 0x14d8, 0x14f0},
528 .mii_tx_clk = {SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, SJA1105_RSV_ADDR,
529 SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, SJA1105_RSV_ADDR,
530 SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, SJA1105_RSV_ADDR,
531 SJA1105_RSV_ADDR, SJA1105_RSV_ADDR},
532 .mii_rx_clk = {SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, SJA1105_RSV_ADDR,
533 SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, SJA1105_RSV_ADDR,
534 SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, SJA1105_RSV_ADDR,
535 SJA1105_RSV_ADDR, SJA1105_RSV_ADDR},
536 .mii_ext_tx_clk = {SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, SJA1105_RSV_ADDR,
537 SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, SJA1105_RSV_ADDR,
538 SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, SJA1105_RSV_ADDR,
539 SJA1105_RSV_ADDR, SJA1105_RSV_ADDR},
540 .mii_ext_rx_clk = {SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, SJA1105_RSV_ADDR,
541 SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, SJA1105_RSV_ADDR,
542 SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, SJA1105_RSV_ADDR,
543 SJA1105_RSV_ADDR, SJA1105_RSV_ADDR},
544 .rgmii_tx_clk = {SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, SJA1105_RSV_ADDR,
545 SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, SJA1105_RSV_ADDR,
546 SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, SJA1105_RSV_ADDR,
547 SJA1105_RSV_ADDR, SJA1105_RSV_ADDR},
548 .rmii_ref_clk = {SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, SJA1105_RSV_ADDR,
549 SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, SJA1105_RSV_ADDR,
550 SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, SJA1105_RSV_ADDR,
551 SJA1105_RSV_ADDR, SJA1105_RSV_ADDR},
552 .rmii_ext_tx_clk = {SJA1105_RSV_ADDR, SJA1105_RSV_ADDR,
553 SJA1105_RSV_ADDR, SJA1105_RSV_ADDR,
554 SJA1105_RSV_ADDR, SJA1105_RSV_ADDR,
555 SJA1105_RSV_ADDR, SJA1105_RSV_ADDR,
556 SJA1105_RSV_ADDR, SJA1105_RSV_ADDR,
557 SJA1105_RSV_ADDR},
558 .ptpschtm = SJA1110_SPI_ADDR(0x54),
559 .ptppinst = SJA1110_SPI_ADDR(0x5c),
560 .ptppindur = SJA1110_SPI_ADDR(0x64),
561 .ptp_control = SJA1110_SPI_ADDR(0x68),
562 .ptpclkval = SJA1110_SPI_ADDR(0x6c),
563 .ptpclkrate = SJA1110_SPI_ADDR(0x74),
564 .ptpclkcorp = SJA1110_SPI_ADDR(0x80),
565 .ptpsyncts = SJA1110_SPI_ADDR(0x84),
566 .mdio_100base_tx = 0x1c2400,
567 .mdio_100base_t1 = 0x1c1000,
568 .pcs_base = {SJA1105_RSV_ADDR, 0x1c1400, 0x1c1800, 0x1c1c00, 0x1c2000,
569 SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, SJA1105_RSV_ADDR,
570 SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, SJA1105_RSV_ADDR},
571 };
572
573 const struct sja1105_info sja1105e_info = {
574 .device_id = SJA1105E_DEVICE_ID,
575 .part_no = SJA1105ET_PART_NO,
576 .static_ops = sja1105e_table_ops,
577 .dyn_ops = sja1105et_dyn_ops,
578 .tag_proto = DSA_TAG_PROTO_SJA1105,
579 .can_limit_mcast_flood = false,
580 .ptp_ts_bits = 24,
581 .ptpegr_ts_bytes = 4,
582 .max_frame_mem = SJA1105_MAX_FRAME_MEMORY,
583 .num_ports = SJA1105_NUM_PORTS,
584 .num_cbs_shapers = SJA1105ET_MAX_CBS_COUNT,
585 .reset_cmd = sja1105et_reset_cmd,
586 .fdb_add_cmd = sja1105et_fdb_add,
587 .fdb_del_cmd = sja1105et_fdb_del,
588 .ptp_cmd_packing = sja1105et_ptp_cmd_packing,
589 .rxtstamp = sja1105_rxtstamp,
590 .clocking_setup = sja1105_clocking_setup,
591 .regs = &sja1105et_regs,
592 .port_speed = {
593 [SJA1105_SPEED_AUTO] = 0,
594 [SJA1105_SPEED_10MBPS] = 3,
595 [SJA1105_SPEED_100MBPS] = 2,
596 [SJA1105_SPEED_1000MBPS] = 1,
597 [SJA1105_SPEED_2500MBPS] = 0, /* Not supported */
598 },
599 .supports_mii = {true, true, true, true, true},
600 .supports_rmii = {true, true, true, true, true},
601 .supports_rgmii = {true, true, true, true, true},
602 .name = "SJA1105E",
603 };
604
605 const struct sja1105_info sja1105t_info = {
606 .device_id = SJA1105T_DEVICE_ID,
607 .part_no = SJA1105ET_PART_NO,
608 .static_ops = sja1105t_table_ops,
609 .dyn_ops = sja1105et_dyn_ops,
610 .tag_proto = DSA_TAG_PROTO_SJA1105,
611 .can_limit_mcast_flood = false,
612 .ptp_ts_bits = 24,
613 .ptpegr_ts_bytes = 4,
614 .max_frame_mem = SJA1105_MAX_FRAME_MEMORY,
615 .num_ports = SJA1105_NUM_PORTS,
616 .num_cbs_shapers = SJA1105ET_MAX_CBS_COUNT,
617 .reset_cmd = sja1105et_reset_cmd,
618 .fdb_add_cmd = sja1105et_fdb_add,
619 .fdb_del_cmd = sja1105et_fdb_del,
620 .ptp_cmd_packing = sja1105et_ptp_cmd_packing,
621 .rxtstamp = sja1105_rxtstamp,
622 .clocking_setup = sja1105_clocking_setup,
623 .regs = &sja1105et_regs,
624 .port_speed = {
625 [SJA1105_SPEED_AUTO] = 0,
626 [SJA1105_SPEED_10MBPS] = 3,
627 [SJA1105_SPEED_100MBPS] = 2,
628 [SJA1105_SPEED_1000MBPS] = 1,
629 [SJA1105_SPEED_2500MBPS] = 0, /* Not supported */
630 },
631 .supports_mii = {true, true, true, true, true},
632 .supports_rmii = {true, true, true, true, true},
633 .supports_rgmii = {true, true, true, true, true},
634 .name = "SJA1105T",
635 };
636
637 const struct sja1105_info sja1105p_info = {
638 .device_id = SJA1105PR_DEVICE_ID,
639 .part_no = SJA1105P_PART_NO,
640 .static_ops = sja1105p_table_ops,
641 .dyn_ops = sja1105pqrs_dyn_ops,
642 .tag_proto = DSA_TAG_PROTO_SJA1105,
643 .can_limit_mcast_flood = true,
644 .ptp_ts_bits = 32,
645 .ptpegr_ts_bytes = 8,
646 .max_frame_mem = SJA1105_MAX_FRAME_MEMORY,
647 .num_ports = SJA1105_NUM_PORTS,
648 .num_cbs_shapers = SJA1105PQRS_MAX_CBS_COUNT,
649 .setup_rgmii_delay = sja1105pqrs_setup_rgmii_delay,
650 .reset_cmd = sja1105pqrs_reset_cmd,
651 .fdb_add_cmd = sja1105pqrs_fdb_add,
652 .fdb_del_cmd = sja1105pqrs_fdb_del,
653 .ptp_cmd_packing = sja1105pqrs_ptp_cmd_packing,
654 .rxtstamp = sja1105_rxtstamp,
655 .clocking_setup = sja1105_clocking_setup,
656 .regs = &sja1105pqrs_regs,
657 .port_speed = {
658 [SJA1105_SPEED_AUTO] = 0,
659 [SJA1105_SPEED_10MBPS] = 3,
660 [SJA1105_SPEED_100MBPS] = 2,
661 [SJA1105_SPEED_1000MBPS] = 1,
662 [SJA1105_SPEED_2500MBPS] = 0, /* Not supported */
663 },
664 .supports_mii = {true, true, true, true, true},
665 .supports_rmii = {true, true, true, true, true},
666 .supports_rgmii = {true, true, true, true, true},
667 .name = "SJA1105P",
668 };
669
670 const struct sja1105_info sja1105q_info = {
671 .device_id = SJA1105QS_DEVICE_ID,
672 .part_no = SJA1105Q_PART_NO,
673 .static_ops = sja1105q_table_ops,
674 .dyn_ops = sja1105pqrs_dyn_ops,
675 .tag_proto = DSA_TAG_PROTO_SJA1105,
676 .can_limit_mcast_flood = true,
677 .ptp_ts_bits = 32,
678 .ptpegr_ts_bytes = 8,
679 .max_frame_mem = SJA1105_MAX_FRAME_MEMORY,
680 .num_ports = SJA1105_NUM_PORTS,
681 .num_cbs_shapers = SJA1105PQRS_MAX_CBS_COUNT,
682 .setup_rgmii_delay = sja1105pqrs_setup_rgmii_delay,
683 .reset_cmd = sja1105pqrs_reset_cmd,
684 .fdb_add_cmd = sja1105pqrs_fdb_add,
685 .fdb_del_cmd = sja1105pqrs_fdb_del,
686 .ptp_cmd_packing = sja1105pqrs_ptp_cmd_packing,
687 .rxtstamp = sja1105_rxtstamp,
688 .clocking_setup = sja1105_clocking_setup,
689 .regs = &sja1105pqrs_regs,
690 .port_speed = {
691 [SJA1105_SPEED_AUTO] = 0,
692 [SJA1105_SPEED_10MBPS] = 3,
693 [SJA1105_SPEED_100MBPS] = 2,
694 [SJA1105_SPEED_1000MBPS] = 1,
695 [SJA1105_SPEED_2500MBPS] = 0, /* Not supported */
696 },
697 .supports_mii = {true, true, true, true, true},
698 .supports_rmii = {true, true, true, true, true},
699 .supports_rgmii = {true, true, true, true, true},
700 .name = "SJA1105Q",
701 };
702
703 const struct sja1105_info sja1105r_info = {
704 .device_id = SJA1105PR_DEVICE_ID,
705 .part_no = SJA1105R_PART_NO,
706 .static_ops = sja1105r_table_ops,
707 .dyn_ops = sja1105pqrs_dyn_ops,
708 .tag_proto = DSA_TAG_PROTO_SJA1105,
709 .can_limit_mcast_flood = true,
710 .ptp_ts_bits = 32,
711 .ptpegr_ts_bytes = 8,
712 .max_frame_mem = SJA1105_MAX_FRAME_MEMORY,
713 .num_ports = SJA1105_NUM_PORTS,
714 .num_cbs_shapers = SJA1105PQRS_MAX_CBS_COUNT,
715 .setup_rgmii_delay = sja1105pqrs_setup_rgmii_delay,
716 .reset_cmd = sja1105pqrs_reset_cmd,
717 .fdb_add_cmd = sja1105pqrs_fdb_add,
718 .fdb_del_cmd = sja1105pqrs_fdb_del,
719 .ptp_cmd_packing = sja1105pqrs_ptp_cmd_packing,
720 .rxtstamp = sja1105_rxtstamp,
721 .clocking_setup = sja1105_clocking_setup,
722 .pcs_mdio_read_c45 = sja1105_pcs_mdio_read_c45,
723 .pcs_mdio_write_c45 = sja1105_pcs_mdio_write_c45,
724 .regs = &sja1105pqrs_regs,
725 .port_speed = {
726 [SJA1105_SPEED_AUTO] = 0,
727 [SJA1105_SPEED_10MBPS] = 3,
728 [SJA1105_SPEED_100MBPS] = 2,
729 [SJA1105_SPEED_1000MBPS] = 1,
730 [SJA1105_SPEED_2500MBPS] = 0, /* Not supported */
731 },
732 .supports_mii = {true, true, true, true, true},
733 .supports_rmii = {true, true, true, true, true},
734 .supports_rgmii = {true, true, true, true, true},
735 .supports_sgmii = {false, false, false, false, true},
736 .name = "SJA1105R",
737 };
738
739 const struct sja1105_info sja1105s_info = {
740 .device_id = SJA1105QS_DEVICE_ID,
741 .part_no = SJA1105S_PART_NO,
742 .static_ops = sja1105s_table_ops,
743 .dyn_ops = sja1105pqrs_dyn_ops,
744 .regs = &sja1105pqrs_regs,
745 .tag_proto = DSA_TAG_PROTO_SJA1105,
746 .can_limit_mcast_flood = true,
747 .ptp_ts_bits = 32,
748 .ptpegr_ts_bytes = 8,
749 .max_frame_mem = SJA1105_MAX_FRAME_MEMORY,
750 .num_ports = SJA1105_NUM_PORTS,
751 .num_cbs_shapers = SJA1105PQRS_MAX_CBS_COUNT,
752 .setup_rgmii_delay = sja1105pqrs_setup_rgmii_delay,
753 .reset_cmd = sja1105pqrs_reset_cmd,
754 .fdb_add_cmd = sja1105pqrs_fdb_add,
755 .fdb_del_cmd = sja1105pqrs_fdb_del,
756 .ptp_cmd_packing = sja1105pqrs_ptp_cmd_packing,
757 .rxtstamp = sja1105_rxtstamp,
758 .clocking_setup = sja1105_clocking_setup,
759 .pcs_mdio_read_c45 = sja1105_pcs_mdio_read_c45,
760 .pcs_mdio_write_c45 = sja1105_pcs_mdio_write_c45,
761 .port_speed = {
762 [SJA1105_SPEED_AUTO] = 0,
763 [SJA1105_SPEED_10MBPS] = 3,
764 [SJA1105_SPEED_100MBPS] = 2,
765 [SJA1105_SPEED_1000MBPS] = 1,
766 [SJA1105_SPEED_2500MBPS] = 0, /* Not supported */
767 },
768 .supports_mii = {true, true, true, true, true},
769 .supports_rmii = {true, true, true, true, true},
770 .supports_rgmii = {true, true, true, true, true},
771 .supports_sgmii = {false, false, false, false, true},
772 .name = "SJA1105S",
773 };
774
775 const struct sja1105_info sja1110a_info = {
776 .device_id = SJA1110_DEVICE_ID,
777 .part_no = SJA1110A_PART_NO,
778 .static_ops = sja1110_table_ops,
779 .dyn_ops = sja1110_dyn_ops,
780 .regs = &sja1110_regs,
781 .tag_proto = DSA_TAG_PROTO_SJA1110,
782 .can_limit_mcast_flood = true,
783 .multiple_cascade_ports = true,
784 .fixed_cbs_mapping = true,
785 .ptp_ts_bits = 32,
786 .ptpegr_ts_bytes = 8,
787 .max_frame_mem = SJA1110_MAX_FRAME_MEMORY,
788 .num_ports = SJA1110_NUM_PORTS,
789 .num_cbs_shapers = SJA1110_MAX_CBS_COUNT,
790 .setup_rgmii_delay = sja1110_setup_rgmii_delay,
791 .reset_cmd = sja1110_reset_cmd,
792 .fdb_add_cmd = sja1105pqrs_fdb_add,
793 .fdb_del_cmd = sja1105pqrs_fdb_del,
794 .ptp_cmd_packing = sja1105pqrs_ptp_cmd_packing,
795 .rxtstamp = sja1110_rxtstamp,
796 .txtstamp = sja1110_txtstamp,
797 .disable_microcontroller = sja1110_disable_microcontroller,
798 .pcs_mdio_read_c45 = sja1110_pcs_mdio_read_c45,
799 .pcs_mdio_write_c45 = sja1110_pcs_mdio_write_c45,
800 .port_speed = {
801 [SJA1105_SPEED_AUTO] = 0,
802 [SJA1105_SPEED_10MBPS] = 4,
803 [SJA1105_SPEED_100MBPS] = 3,
804 [SJA1105_SPEED_1000MBPS] = 2,
805 [SJA1105_SPEED_2500MBPS] = 1,
806 },
807 .supports_mii = {true, true, true, true, false,
808 true, true, true, true, true, true},
809 .supports_rmii = {false, false, true, true, false,
810 false, false, false, false, false, false},
811 .supports_rgmii = {false, false, true, true, false,
812 false, false, false, false, false, false},
813 .supports_sgmii = {false, true, true, true, true,
814 false, false, false, false, false, false},
815 .supports_2500basex = {false, false, false, true, true,
816 false, false, false, false, false, false},
817 .internal_phy = {SJA1105_NO_PHY, SJA1105_PHY_BASE_TX,
818 SJA1105_NO_PHY, SJA1105_NO_PHY,
819 SJA1105_NO_PHY, SJA1105_PHY_BASE_T1,
820 SJA1105_PHY_BASE_T1, SJA1105_PHY_BASE_T1,
821 SJA1105_PHY_BASE_T1, SJA1105_PHY_BASE_T1,
822 SJA1105_PHY_BASE_T1},
823 .name = "SJA1110A",
824 };
825
826 const struct sja1105_info sja1110b_info = {
827 .device_id = SJA1110_DEVICE_ID,
828 .part_no = SJA1110B_PART_NO,
829 .static_ops = sja1110_table_ops,
830 .dyn_ops = sja1110_dyn_ops,
831 .regs = &sja1110_regs,
832 .tag_proto = DSA_TAG_PROTO_SJA1110,
833 .can_limit_mcast_flood = true,
834 .multiple_cascade_ports = true,
835 .fixed_cbs_mapping = true,
836 .ptp_ts_bits = 32,
837 .ptpegr_ts_bytes = 8,
838 .max_frame_mem = SJA1110_MAX_FRAME_MEMORY,
839 .num_ports = SJA1110_NUM_PORTS,
840 .num_cbs_shapers = SJA1110_MAX_CBS_COUNT,
841 .setup_rgmii_delay = sja1110_setup_rgmii_delay,
842 .reset_cmd = sja1110_reset_cmd,
843 .fdb_add_cmd = sja1105pqrs_fdb_add,
844 .fdb_del_cmd = sja1105pqrs_fdb_del,
845 .ptp_cmd_packing = sja1105pqrs_ptp_cmd_packing,
846 .rxtstamp = sja1110_rxtstamp,
847 .txtstamp = sja1110_txtstamp,
848 .disable_microcontroller = sja1110_disable_microcontroller,
849 .pcs_mdio_read_c45 = sja1110_pcs_mdio_read_c45,
850 .pcs_mdio_write_c45 = sja1110_pcs_mdio_write_c45,
851 .port_speed = {
852 [SJA1105_SPEED_AUTO] = 0,
853 [SJA1105_SPEED_10MBPS] = 4,
854 [SJA1105_SPEED_100MBPS] = 3,
855 [SJA1105_SPEED_1000MBPS] = 2,
856 [SJA1105_SPEED_2500MBPS] = 1,
857 },
858 .supports_mii = {true, true, true, true, false,
859 true, true, true, true, true, false},
860 .supports_rmii = {false, false, true, true, false,
861 false, false, false, false, false, false},
862 .supports_rgmii = {false, false, true, true, false,
863 false, false, false, false, false, false},
864 .supports_sgmii = {false, false, false, true, true,
865 false, false, false, false, false, false},
866 .supports_2500basex = {false, false, false, true, true,
867 false, false, false, false, false, false},
868 .internal_phy = {SJA1105_NO_PHY, SJA1105_PHY_BASE_TX,
869 SJA1105_NO_PHY, SJA1105_NO_PHY,
870 SJA1105_NO_PHY, SJA1105_PHY_BASE_T1,
871 SJA1105_PHY_BASE_T1, SJA1105_PHY_BASE_T1,
872 SJA1105_PHY_BASE_T1, SJA1105_PHY_BASE_T1,
873 SJA1105_NO_PHY},
874 .name = "SJA1110B",
875 };
876
877 const struct sja1105_info sja1110c_info = {
878 .device_id = SJA1110_DEVICE_ID,
879 .part_no = SJA1110C_PART_NO,
880 .static_ops = sja1110_table_ops,
881 .dyn_ops = sja1110_dyn_ops,
882 .regs = &sja1110_regs,
883 .tag_proto = DSA_TAG_PROTO_SJA1110,
884 .can_limit_mcast_flood = true,
885 .multiple_cascade_ports = true,
886 .fixed_cbs_mapping = true,
887 .ptp_ts_bits = 32,
888 .ptpegr_ts_bytes = 8,
889 .max_frame_mem = SJA1110_MAX_FRAME_MEMORY,
890 .num_ports = SJA1110_NUM_PORTS,
891 .num_cbs_shapers = SJA1110_MAX_CBS_COUNT,
892 .setup_rgmii_delay = sja1110_setup_rgmii_delay,
893 .reset_cmd = sja1110_reset_cmd,
894 .fdb_add_cmd = sja1105pqrs_fdb_add,
895 .fdb_del_cmd = sja1105pqrs_fdb_del,
896 .ptp_cmd_packing = sja1105pqrs_ptp_cmd_packing,
897 .rxtstamp = sja1110_rxtstamp,
898 .txtstamp = sja1110_txtstamp,
899 .disable_microcontroller = sja1110_disable_microcontroller,
900 .pcs_mdio_read_c45 = sja1110_pcs_mdio_read_c45,
901 .pcs_mdio_write_c45 = sja1110_pcs_mdio_write_c45,
902 .port_speed = {
903 [SJA1105_SPEED_AUTO] = 0,
904 [SJA1105_SPEED_10MBPS] = 4,
905 [SJA1105_SPEED_100MBPS] = 3,
906 [SJA1105_SPEED_1000MBPS] = 2,
907 [SJA1105_SPEED_2500MBPS] = 1,
908 },
909 .supports_mii = {true, true, true, true, false,
910 true, true, true, false, false, false},
911 .supports_rmii = {false, false, true, true, false,
912 false, false, false, false, false, false},
913 .supports_rgmii = {false, false, true, true, false,
914 false, false, false, false, false, false},
915 .supports_sgmii = {false, false, false, false, true,
916 false, false, false, false, false, false},
917 .supports_2500basex = {false, false, false, false, true,
918 false, false, false, false, false, false},
919 .internal_phy = {SJA1105_NO_PHY, SJA1105_PHY_BASE_TX,
920 SJA1105_NO_PHY, SJA1105_NO_PHY,
921 SJA1105_NO_PHY, SJA1105_PHY_BASE_T1,
922 SJA1105_PHY_BASE_T1, SJA1105_PHY_BASE_T1,
923 SJA1105_NO_PHY, SJA1105_NO_PHY,
924 SJA1105_NO_PHY},
925 .name = "SJA1110C",
926 };
927
928 const struct sja1105_info sja1110d_info = {
929 .device_id = SJA1110_DEVICE_ID,
930 .part_no = SJA1110D_PART_NO,
931 .static_ops = sja1110_table_ops,
932 .dyn_ops = sja1110_dyn_ops,
933 .regs = &sja1110_regs,
934 .tag_proto = DSA_TAG_PROTO_SJA1110,
935 .can_limit_mcast_flood = true,
936 .multiple_cascade_ports = true,
937 .fixed_cbs_mapping = true,
938 .ptp_ts_bits = 32,
939 .ptpegr_ts_bytes = 8,
940 .max_frame_mem = SJA1110_MAX_FRAME_MEMORY,
941 .num_ports = SJA1110_NUM_PORTS,
942 .num_cbs_shapers = SJA1110_MAX_CBS_COUNT,
943 .setup_rgmii_delay = sja1110_setup_rgmii_delay,
944 .reset_cmd = sja1110_reset_cmd,
945 .fdb_add_cmd = sja1105pqrs_fdb_add,
946 .fdb_del_cmd = sja1105pqrs_fdb_del,
947 .ptp_cmd_packing = sja1105pqrs_ptp_cmd_packing,
948 .rxtstamp = sja1110_rxtstamp,
949 .txtstamp = sja1110_txtstamp,
950 .disable_microcontroller = sja1110_disable_microcontroller,
951 .pcs_mdio_read_c45 = sja1110_pcs_mdio_read_c45,
952 .pcs_mdio_write_c45 = sja1110_pcs_mdio_write_c45,
953 .port_speed = {
954 [SJA1105_SPEED_AUTO] = 0,
955 [SJA1105_SPEED_10MBPS] = 4,
956 [SJA1105_SPEED_100MBPS] = 3,
957 [SJA1105_SPEED_1000MBPS] = 2,
958 [SJA1105_SPEED_2500MBPS] = 1,
959 },
960 .supports_mii = {true, false, true, false, false,
961 true, true, true, false, false, false},
962 .supports_rmii = {false, false, true, false, false,
963 false, false, false, false, false, false},
964 .supports_rgmii = {false, false, true, false, false,
965 false, false, false, false, false, false},
966 .supports_sgmii = {false, true, true, true, true,
967 false, false, false, false, false, false},
968 .supports_2500basex = {false, false, false, true, true,
969 false, false, false, false, false, false},
970 .internal_phy = {SJA1105_NO_PHY, SJA1105_NO_PHY,
971 SJA1105_NO_PHY, SJA1105_NO_PHY,
972 SJA1105_NO_PHY, SJA1105_PHY_BASE_T1,
973 SJA1105_PHY_BASE_T1, SJA1105_PHY_BASE_T1,
974 SJA1105_NO_PHY, SJA1105_NO_PHY,
975 SJA1105_NO_PHY},
976 .name = "SJA1110D",
977 };
Linux Kernel