arch/mips/pci/fixup-cobalt.c

   1 /*
   2  * Cobalt Qube/Raq PCI support
   3  *
   4  * This file is subject to the terms and conditions of the GNU General Public
   5  * License.  See the file "COPYING" in the main directory of this archive
   6  * for more details.
   7  *
   8  * Copyright (C) 1995, 1996, 1997, 2002, 2003 by Ralf Baechle
   9  * Copyright (C) 2001, 2002, 2003 by Liam Davies (ldavies@agile.tv)
  10  */
  11 #include <linux/types.h>
  12 #include <linux/pci.h>
  13 #include <linux/kernel.h>
  14 #include <linux/init.h>
  15
  16 #include <asm/pci.h>
  17 #include <asm/io.h>
  18 #include <asm/gt64120.h>
  19
  20 #include <cobalt.h>
  21 #include <irq.h>
  22
  23 /*
  24  * PCI slot numbers
  25  */
  26 #define COBALT_PCICONF_CPU      0x06
  27 #define COBALT_PCICONF_ETH0     0x07
  28 #define COBALT_PCICONF_RAQSCSI  0x08
  29 #define COBALT_PCICONF_VIA      0x09
  30 #define COBALT_PCICONF_PCISLOT  0x0A
  31 #define COBALT_PCICONF_ETH1     0x0C
  32
  33 /*
  34  * The Cobalt board ID information.  The boards have an ID number wired
  35  * into the VIA that is available in the high nibble of register 94.
  36  */
  37 #define VIA_COBALT_BRD_ID_REG  0x94
  38 #define VIA_COBALT_BRD_REG_to_ID(reg)   ((unsigned char)(reg) >> 4)
  39
  40 static void __devinit qube_raq_galileo_early_fixup(struct pci_dev *dev)
  41 {
  42         if (dev->devfn == PCI_DEVFN(0, 0) &&
  43                 (dev->class >> 8) == PCI_CLASS_MEMORY_OTHER) {
  44
  45                 dev->class = (PCI_CLASS_BRIDGE_HOST << 8) | (dev->class & 0xff);
  46
  47                 printk(KERN_INFO "Galileo: fixed bridge class\n");
  48         }
  49 }
  50
  51 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_MARVELL, PCI_DEVICE_ID_MARVELL_GT64111,
  52          qube_raq_galileo_early_fixup);
  53
  54 static void __devinit qube_raq_via_bmIDE_fixup(struct pci_dev *dev)
  55 {
  56         unsigned short cfgword;
  57         unsigned char lt;
  58
  59         /* Enable Bus Mastering and fast back to back. */
  60         pci_read_config_word(dev, PCI_COMMAND, &cfgword);
  61         cfgword |= (PCI_COMMAND_FAST_BACK | PCI_COMMAND_MASTER);
  62         pci_write_config_word(dev, PCI_COMMAND, cfgword);
  63
  64         /* Enable both ide interfaces. ROM only enables primary one.  */
  65         pci_write_config_byte(dev, 0x40, 0xb);
  66
  67         /* Set latency timer to reasonable value. */
  68         pci_read_config_byte(dev, PCI_LATENCY_TIMER, &lt);
  69         if (lt < 64)
  70                 pci_write_config_byte(dev, PCI_LATENCY_TIMER, 64);
  71         pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, 8);
  72 }
  73
  74 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_1,
  75          qube_raq_via_bmIDE_fixup);
  76
  77 static void __devinit qube_raq_galileo_fixup(struct pci_dev *dev)
  78 {
  79         if (dev->devfn != PCI_DEVFN(0, 0))
  80                 return;
  81
  82         /* Fix PCI latency-timer and cache-line-size values in Galileo
  83          * host bridge.
  84          */
  85         pci_write_config_byte(dev, PCI_LATENCY_TIMER, 64);
  86         pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, 8);
  87
  88         /*
  89          * The code described by the comment below has been removed
  90          * as it causes bus mastering by the Ethernet controllers
  91          * to break under any kind of network load. We always set
  92          * the retry timeouts to their maximum.
  93          *
  94          * --x--x--x--x--x--x--x--x--x--x--x--x--x--x--x--x--x--x--x--x--
  95          *
  96          * On all machines prior to Q2, we had the STOP line disconnected
  97          * from Galileo to VIA on PCI.  The new Galileo does not function
  98          * correctly unless we have it connected.
  99          *
 100          * Therefore we must set the disconnect/retry cycle values to
 101          * something sensible when using the new Galileo.
 102          */
 103
 104         printk(KERN_INFO "Galileo: revision %u\n", dev->revision);
 105
 106 #if 0
 107         if (dev->revision >= 0x10) {
 108                 /* New Galileo, assumes PCI stop line to VIA is connected. */
 109                 GT_WRITE(GT_PCI0_TOR_OFS, 0x4020);
 110         } else if (dev->revision == 0x1 || dev->revision == 0x2)
 111 #endif
 112         {
 113                 signed int timeo;
 114                 /* XXX WE MUST DO THIS ELSE GALILEO LOCKS UP! -DaveM */
 115                 timeo = GT_READ(GT_PCI0_TOR_OFS);
 116                 /* Old Galileo, assumes PCI STOP line to VIA is disconnected. */
 117                 GT_WRITE(GT_PCI0_TOR_OFS,
 118                         (0xff << 16) |          /* retry count */
 119                         (0xff << 8) |           /* timeout 1   */
 120                         0xff);                  /* timeout 0   */
 121
 122                 /* enable PCI retry exceeded interrupt */
 123                 GT_WRITE(GT_INTRMASK_OFS, GT_INTR_RETRYCTR0_MSK | GT_READ(GT_INTRMASK_OFS));
 124         }
 125 }
 126
 127 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL, PCI_DEVICE_ID_MARVELL_GT64111,
 128          qube_raq_galileo_fixup);
 129
 130 int cobalt_board_id;
 131
 132 static void __devinit qube_raq_via_board_id_fixup(struct pci_dev *dev)
 133 {
 134         u8 id;
 135         int retval;
 136
 137         retval = pci_read_config_byte(dev, VIA_COBALT_BRD_ID_REG, &id);
 138         if (retval) {
 139                 panic("Cannot read board ID");
 140                 return;
 141         }
 142
 143         cobalt_board_id = VIA_COBALT_BRD_REG_to_ID(id);
 144
 145         printk(KERN_INFO "Cobalt board ID: %d\n", cobalt_board_id);
 146 }
 147
 148 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_0,
 149          qube_raq_via_board_id_fixup);
 150
 151 static char irq_tab_qube1[] __initdata = {
 152   [COBALT_PCICONF_CPU]     = 0,
 153   [COBALT_PCICONF_ETH0]    = QUBE1_ETH0_IRQ,
 154   [COBALT_PCICONF_RAQSCSI] = SCSI_IRQ,
 155   [COBALT_PCICONF_VIA]     = 0,
 156   [COBALT_PCICONF_PCISLOT] = PCISLOT_IRQ,
 157   [COBALT_PCICONF_ETH1]    = 0
 158 };
 159
 160 static char irq_tab_cobalt[] __initdata = {
 161   [COBALT_PCICONF_CPU]     = 0,
 162   [COBALT_PCICONF_ETH0]    = ETH0_IRQ,
 163   [COBALT_PCICONF_RAQSCSI] = SCSI_IRQ,
 164   [COBALT_PCICONF_VIA]     = 0,
 165   [COBALT_PCICONF_PCISLOT] = PCISLOT_IRQ,
 166   [COBALT_PCICONF_ETH1]    = ETH1_IRQ
 167 };
 168
 169 static char irq_tab_raq2[] __initdata = {
 170   [COBALT_PCICONF_CPU]     = 0,
 171   [COBALT_PCICONF_ETH0]    = ETH0_IRQ,
 172   [COBALT_PCICONF_RAQSCSI] = RAQ2_SCSI_IRQ,
 173   [COBALT_PCICONF_VIA]     = 0,
 174   [COBALT_PCICONF_PCISLOT] = PCISLOT_IRQ,
 175   [COBALT_PCICONF_ETH1]    = ETH1_IRQ
 176 };
 177
 178 int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
 179 {
 180         if (cobalt_board_id <= COBALT_BRD_ID_QUBE1)
 181                 return irq_tab_qube1[slot];
 182
 183         if (cobalt_board_id == COBALT_BRD_ID_RAQ2)
 184                 return irq_tab_raq2[slot];
 185
 186         return irq_tab_cobalt[slot];
 187 }
 188
 189 /* Do platform specific device initialization at pci_enable_device() time */
 190 int pcibios_plat_dev_init(struct pci_dev *dev)
 191 {
 192         return 0;
 193 }