scsi: use per-cpu buffer for formatting scsi_print_result()
[linux/fpc-iii.git] / drivers / video / backlight / s6e63m0.c
blob28bfa127fee45aca7a0bd4c193efa47cb8d80e58
1 /*
2 * S6E63M0 AMOLED LCD panel driver.
4 * Author: InKi Dae <inki.dae@samsung.com>
6 * Derived from drivers/video/omap/lcd-apollon.c
8 * This program is free software; you can redistribute it and/or modify it
9 * under the terms of the GNU General Public License as published by the
10 * Free Software Foundation; either version 2 of the License, or (at your
11 * option) any later version.
14 #include <linux/backlight.h>
15 #include <linux/delay.h>
16 #include <linux/fb.h>
17 #include <linux/gpio.h>
18 #include <linux/interrupt.h>
19 #include <linux/irq.h>
20 #include <linux/kernel.h>
21 #include <linux/lcd.h>
22 #include <linux/module.h>
23 #include <linux/spi/spi.h>
24 #include <linux/wait.h>
26 #include "s6e63m0_gamma.h"
28 #define SLEEPMSEC 0x1000
29 #define ENDDEF 0x2000
30 #define DEFMASK 0xFF00
31 #define COMMAND_ONLY 0xFE
32 #define DATA_ONLY 0xFF
34 #define MIN_BRIGHTNESS 0
35 #define MAX_BRIGHTNESS 10
37 struct s6e63m0 {
38 struct device *dev;
39 struct spi_device *spi;
40 unsigned int power;
41 unsigned int current_brightness;
42 unsigned int gamma_mode;
43 unsigned int gamma_table_count;
44 struct lcd_device *ld;
45 struct backlight_device *bd;
46 struct lcd_platform_data *lcd_pd;
49 static const unsigned short seq_panel_condition_set[] = {
50 0xF8, 0x01,
51 DATA_ONLY, 0x27,
52 DATA_ONLY, 0x27,
53 DATA_ONLY, 0x07,
54 DATA_ONLY, 0x07,
55 DATA_ONLY, 0x54,
56 DATA_ONLY, 0x9f,
57 DATA_ONLY, 0x63,
58 DATA_ONLY, 0x86,
59 DATA_ONLY, 0x1a,
60 DATA_ONLY, 0x33,
61 DATA_ONLY, 0x0d,
62 DATA_ONLY, 0x00,
63 DATA_ONLY, 0x00,
65 ENDDEF, 0x0000
68 static const unsigned short seq_display_condition_set[] = {
69 0xf2, 0x02,
70 DATA_ONLY, 0x03,
71 DATA_ONLY, 0x1c,
72 DATA_ONLY, 0x10,
73 DATA_ONLY, 0x10,
75 0xf7, 0x03,
76 DATA_ONLY, 0x00,
77 DATA_ONLY, 0x00,
79 ENDDEF, 0x0000
82 static const unsigned short seq_gamma_setting[] = {
83 0xfa, 0x00,
84 DATA_ONLY, 0x18,
85 DATA_ONLY, 0x08,
86 DATA_ONLY, 0x24,
87 DATA_ONLY, 0x64,
88 DATA_ONLY, 0x56,
89 DATA_ONLY, 0x33,
90 DATA_ONLY, 0xb6,
91 DATA_ONLY, 0xba,
92 DATA_ONLY, 0xa8,
93 DATA_ONLY, 0xac,
94 DATA_ONLY, 0xb1,
95 DATA_ONLY, 0x9d,
96 DATA_ONLY, 0xc1,
97 DATA_ONLY, 0xc1,
98 DATA_ONLY, 0xb7,
99 DATA_ONLY, 0x00,
100 DATA_ONLY, 0x9c,
101 DATA_ONLY, 0x00,
102 DATA_ONLY, 0x9f,
103 DATA_ONLY, 0x00,
104 DATA_ONLY, 0xd6,
106 0xfa, 0x01,
108 ENDDEF, 0x0000
111 static const unsigned short seq_etc_condition_set[] = {
112 0xf6, 0x00,
113 DATA_ONLY, 0x8c,
114 DATA_ONLY, 0x07,
116 0xb3, 0xc,
118 0xb5, 0x2c,
119 DATA_ONLY, 0x12,
120 DATA_ONLY, 0x0c,
121 DATA_ONLY, 0x0a,
122 DATA_ONLY, 0x10,
123 DATA_ONLY, 0x0e,
124 DATA_ONLY, 0x17,
125 DATA_ONLY, 0x13,
126 DATA_ONLY, 0x1f,
127 DATA_ONLY, 0x1a,
128 DATA_ONLY, 0x2a,
129 DATA_ONLY, 0x24,
130 DATA_ONLY, 0x1f,
131 DATA_ONLY, 0x1b,
132 DATA_ONLY, 0x1a,
133 DATA_ONLY, 0x17,
135 DATA_ONLY, 0x2b,
136 DATA_ONLY, 0x26,
137 DATA_ONLY, 0x22,
138 DATA_ONLY, 0x20,
139 DATA_ONLY, 0x3a,
140 DATA_ONLY, 0x34,
141 DATA_ONLY, 0x30,
142 DATA_ONLY, 0x2c,
143 DATA_ONLY, 0x29,
144 DATA_ONLY, 0x26,
145 DATA_ONLY, 0x25,
146 DATA_ONLY, 0x23,
147 DATA_ONLY, 0x21,
148 DATA_ONLY, 0x20,
149 DATA_ONLY, 0x1e,
150 DATA_ONLY, 0x1e,
152 0xb6, 0x00,
153 DATA_ONLY, 0x00,
154 DATA_ONLY, 0x11,
155 DATA_ONLY, 0x22,
156 DATA_ONLY, 0x33,
157 DATA_ONLY, 0x44,
158 DATA_ONLY, 0x44,
159 DATA_ONLY, 0x44,
161 DATA_ONLY, 0x55,
162 DATA_ONLY, 0x55,
163 DATA_ONLY, 0x66,
164 DATA_ONLY, 0x66,
165 DATA_ONLY, 0x66,
166 DATA_ONLY, 0x66,
167 DATA_ONLY, 0x66,
168 DATA_ONLY, 0x66,
170 0xb7, 0x2c,
171 DATA_ONLY, 0x12,
172 DATA_ONLY, 0x0c,
173 DATA_ONLY, 0x0a,
174 DATA_ONLY, 0x10,
175 DATA_ONLY, 0x0e,
176 DATA_ONLY, 0x17,
177 DATA_ONLY, 0x13,
178 DATA_ONLY, 0x1f,
179 DATA_ONLY, 0x1a,
180 DATA_ONLY, 0x2a,
181 DATA_ONLY, 0x24,
182 DATA_ONLY, 0x1f,
183 DATA_ONLY, 0x1b,
184 DATA_ONLY, 0x1a,
185 DATA_ONLY, 0x17,
187 DATA_ONLY, 0x2b,
188 DATA_ONLY, 0x26,
189 DATA_ONLY, 0x22,
190 DATA_ONLY, 0x20,
191 DATA_ONLY, 0x3a,
192 DATA_ONLY, 0x34,
193 DATA_ONLY, 0x30,
194 DATA_ONLY, 0x2c,
195 DATA_ONLY, 0x29,
196 DATA_ONLY, 0x26,
197 DATA_ONLY, 0x25,
198 DATA_ONLY, 0x23,
199 DATA_ONLY, 0x21,
200 DATA_ONLY, 0x20,
201 DATA_ONLY, 0x1e,
202 DATA_ONLY, 0x1e,
204 0xb8, 0x00,
205 DATA_ONLY, 0x00,
206 DATA_ONLY, 0x11,
207 DATA_ONLY, 0x22,
208 DATA_ONLY, 0x33,
209 DATA_ONLY, 0x44,
210 DATA_ONLY, 0x44,
211 DATA_ONLY, 0x44,
213 DATA_ONLY, 0x55,
214 DATA_ONLY, 0x55,
215 DATA_ONLY, 0x66,
216 DATA_ONLY, 0x66,
217 DATA_ONLY, 0x66,
218 DATA_ONLY, 0x66,
219 DATA_ONLY, 0x66,
220 DATA_ONLY, 0x66,
222 0xb9, 0x2c,
223 DATA_ONLY, 0x12,
224 DATA_ONLY, 0x0c,
225 DATA_ONLY, 0x0a,
226 DATA_ONLY, 0x10,
227 DATA_ONLY, 0x0e,
228 DATA_ONLY, 0x17,
229 DATA_ONLY, 0x13,
230 DATA_ONLY, 0x1f,
231 DATA_ONLY, 0x1a,
232 DATA_ONLY, 0x2a,
233 DATA_ONLY, 0x24,
234 DATA_ONLY, 0x1f,
235 DATA_ONLY, 0x1b,
236 DATA_ONLY, 0x1a,
237 DATA_ONLY, 0x17,
239 DATA_ONLY, 0x2b,
240 DATA_ONLY, 0x26,
241 DATA_ONLY, 0x22,
242 DATA_ONLY, 0x20,
243 DATA_ONLY, 0x3a,
244 DATA_ONLY, 0x34,
245 DATA_ONLY, 0x30,
246 DATA_ONLY, 0x2c,
247 DATA_ONLY, 0x29,
248 DATA_ONLY, 0x26,
249 DATA_ONLY, 0x25,
250 DATA_ONLY, 0x23,
251 DATA_ONLY, 0x21,
252 DATA_ONLY, 0x20,
253 DATA_ONLY, 0x1e,
254 DATA_ONLY, 0x1e,
256 0xba, 0x00,
257 DATA_ONLY, 0x00,
258 DATA_ONLY, 0x11,
259 DATA_ONLY, 0x22,
260 DATA_ONLY, 0x33,
261 DATA_ONLY, 0x44,
262 DATA_ONLY, 0x44,
263 DATA_ONLY, 0x44,
265 DATA_ONLY, 0x55,
266 DATA_ONLY, 0x55,
267 DATA_ONLY, 0x66,
268 DATA_ONLY, 0x66,
269 DATA_ONLY, 0x66,
270 DATA_ONLY, 0x66,
271 DATA_ONLY, 0x66,
272 DATA_ONLY, 0x66,
274 0xc1, 0x4d,
275 DATA_ONLY, 0x96,
276 DATA_ONLY, 0x1d,
277 DATA_ONLY, 0x00,
278 DATA_ONLY, 0x00,
279 DATA_ONLY, 0x01,
280 DATA_ONLY, 0xdf,
281 DATA_ONLY, 0x00,
282 DATA_ONLY, 0x00,
283 DATA_ONLY, 0x03,
284 DATA_ONLY, 0x1f,
285 DATA_ONLY, 0x00,
286 DATA_ONLY, 0x00,
287 DATA_ONLY, 0x00,
288 DATA_ONLY, 0x00,
289 DATA_ONLY, 0x00,
290 DATA_ONLY, 0x00,
291 DATA_ONLY, 0x00,
292 DATA_ONLY, 0x00,
293 DATA_ONLY, 0x03,
294 DATA_ONLY, 0x06,
295 DATA_ONLY, 0x09,
296 DATA_ONLY, 0x0d,
297 DATA_ONLY, 0x0f,
298 DATA_ONLY, 0x12,
299 DATA_ONLY, 0x15,
300 DATA_ONLY, 0x18,
302 0xb2, 0x10,
303 DATA_ONLY, 0x10,
304 DATA_ONLY, 0x0b,
305 DATA_ONLY, 0x05,
307 ENDDEF, 0x0000
310 static const unsigned short seq_acl_on[] = {
311 /* ACL on */
312 0xc0, 0x01,
314 ENDDEF, 0x0000
317 static const unsigned short seq_acl_off[] = {
318 /* ACL off */
319 0xc0, 0x00,
321 ENDDEF, 0x0000
324 static const unsigned short seq_elvss_on[] = {
325 /* ELVSS on */
326 0xb1, 0x0b,
328 ENDDEF, 0x0000
331 static const unsigned short seq_elvss_off[] = {
332 /* ELVSS off */
333 0xb1, 0x0a,
335 ENDDEF, 0x0000
338 static const unsigned short seq_stand_by_off[] = {
339 0x11, COMMAND_ONLY,
341 ENDDEF, 0x0000
344 static const unsigned short seq_stand_by_on[] = {
345 0x10, COMMAND_ONLY,
347 ENDDEF, 0x0000
350 static const unsigned short seq_display_on[] = {
351 0x29, COMMAND_ONLY,
353 ENDDEF, 0x0000
357 static int s6e63m0_spi_write_byte(struct s6e63m0 *lcd, int addr, int data)
359 u16 buf[1];
360 struct spi_message msg;
362 struct spi_transfer xfer = {
363 .len = 2,
364 .tx_buf = buf,
367 buf[0] = (addr << 8) | data;
369 spi_message_init(&msg);
370 spi_message_add_tail(&xfer, &msg);
372 return spi_sync(lcd->spi, &msg);
375 static int s6e63m0_spi_write(struct s6e63m0 *lcd, unsigned char address,
376 unsigned char command)
378 int ret = 0;
380 if (address != DATA_ONLY)
381 ret = s6e63m0_spi_write_byte(lcd, 0x0, address);
382 if (command != COMMAND_ONLY)
383 ret = s6e63m0_spi_write_byte(lcd, 0x1, command);
385 return ret;
388 static int s6e63m0_panel_send_sequence(struct s6e63m0 *lcd,
389 const unsigned short *wbuf)
391 int ret = 0, i = 0;
393 while ((wbuf[i] & DEFMASK) != ENDDEF) {
394 if ((wbuf[i] & DEFMASK) != SLEEPMSEC) {
395 ret = s6e63m0_spi_write(lcd, wbuf[i], wbuf[i+1]);
396 if (ret)
397 break;
398 } else {
399 msleep(wbuf[i+1]);
401 i += 2;
404 return ret;
407 static int _s6e63m0_gamma_ctl(struct s6e63m0 *lcd, const unsigned int *gamma)
409 unsigned int i = 0;
410 int ret = 0;
412 /* disable gamma table updating. */
413 ret = s6e63m0_spi_write(lcd, 0xfa, 0x00);
414 if (ret) {
415 dev_err(lcd->dev, "failed to disable gamma table updating.\n");
416 goto gamma_err;
419 for (i = 0 ; i < GAMMA_TABLE_COUNT; i++) {
420 ret = s6e63m0_spi_write(lcd, DATA_ONLY, gamma[i]);
421 if (ret) {
422 dev_err(lcd->dev, "failed to set gamma table.\n");
423 goto gamma_err;
427 /* update gamma table. */
428 ret = s6e63m0_spi_write(lcd, 0xfa, 0x01);
429 if (ret)
430 dev_err(lcd->dev, "failed to update gamma table.\n");
432 gamma_err:
433 return ret;
436 static int s6e63m0_gamma_ctl(struct s6e63m0 *lcd, int gamma)
438 int ret = 0;
440 ret = _s6e63m0_gamma_ctl(lcd, gamma_table.gamma_22_table[gamma]);
442 return ret;
446 static int s6e63m0_ldi_init(struct s6e63m0 *lcd)
448 int ret, i;
449 const unsigned short *init_seq[] = {
450 seq_panel_condition_set,
451 seq_display_condition_set,
452 seq_gamma_setting,
453 seq_etc_condition_set,
454 seq_acl_on,
455 seq_elvss_on,
458 for (i = 0; i < ARRAY_SIZE(init_seq); i++) {
459 ret = s6e63m0_panel_send_sequence(lcd, init_seq[i]);
460 if (ret)
461 break;
464 return ret;
467 static int s6e63m0_ldi_enable(struct s6e63m0 *lcd)
469 int ret = 0, i;
470 const unsigned short *enable_seq[] = {
471 seq_stand_by_off,
472 seq_display_on,
475 for (i = 0; i < ARRAY_SIZE(enable_seq); i++) {
476 ret = s6e63m0_panel_send_sequence(lcd, enable_seq[i]);
477 if (ret)
478 break;
481 return ret;
484 static int s6e63m0_ldi_disable(struct s6e63m0 *lcd)
486 int ret;
488 ret = s6e63m0_panel_send_sequence(lcd, seq_stand_by_on);
490 return ret;
493 static int s6e63m0_power_is_on(int power)
495 return power <= FB_BLANK_NORMAL;
498 static int s6e63m0_power_on(struct s6e63m0 *lcd)
500 int ret = 0;
501 struct lcd_platform_data *pd;
502 struct backlight_device *bd;
504 pd = lcd->lcd_pd;
505 bd = lcd->bd;
507 if (!pd->power_on) {
508 dev_err(lcd->dev, "power_on is NULL.\n");
509 return -EINVAL;
512 pd->power_on(lcd->ld, 1);
513 msleep(pd->power_on_delay);
515 if (!pd->reset) {
516 dev_err(lcd->dev, "reset is NULL.\n");
517 return -EINVAL;
520 pd->reset(lcd->ld);
521 msleep(pd->reset_delay);
523 ret = s6e63m0_ldi_init(lcd);
524 if (ret) {
525 dev_err(lcd->dev, "failed to initialize ldi.\n");
526 return ret;
529 ret = s6e63m0_ldi_enable(lcd);
530 if (ret) {
531 dev_err(lcd->dev, "failed to enable ldi.\n");
532 return ret;
535 /* set brightness to current value after power on or resume. */
536 ret = s6e63m0_gamma_ctl(lcd, bd->props.brightness);
537 if (ret) {
538 dev_err(lcd->dev, "lcd gamma setting failed.\n");
539 return ret;
542 return 0;
545 static int s6e63m0_power_off(struct s6e63m0 *lcd)
547 int ret;
548 struct lcd_platform_data *pd;
550 pd = lcd->lcd_pd;
552 ret = s6e63m0_ldi_disable(lcd);
553 if (ret) {
554 dev_err(lcd->dev, "lcd setting failed.\n");
555 return -EIO;
558 msleep(pd->power_off_delay);
560 pd->power_on(lcd->ld, 0);
562 return 0;
565 static int s6e63m0_power(struct s6e63m0 *lcd, int power)
567 int ret = 0;
569 if (s6e63m0_power_is_on(power) && !s6e63m0_power_is_on(lcd->power))
570 ret = s6e63m0_power_on(lcd);
571 else if (!s6e63m0_power_is_on(power) && s6e63m0_power_is_on(lcd->power))
572 ret = s6e63m0_power_off(lcd);
574 if (!ret)
575 lcd->power = power;
577 return ret;
580 static int s6e63m0_set_power(struct lcd_device *ld, int power)
582 struct s6e63m0 *lcd = lcd_get_data(ld);
584 if (power != FB_BLANK_UNBLANK && power != FB_BLANK_POWERDOWN &&
585 power != FB_BLANK_NORMAL) {
586 dev_err(lcd->dev, "power value should be 0, 1 or 4.\n");
587 return -EINVAL;
590 return s6e63m0_power(lcd, power);
593 static int s6e63m0_get_power(struct lcd_device *ld)
595 struct s6e63m0 *lcd = lcd_get_data(ld);
597 return lcd->power;
600 static int s6e63m0_set_brightness(struct backlight_device *bd)
602 int ret = 0, brightness = bd->props.brightness;
603 struct s6e63m0 *lcd = bl_get_data(bd);
605 if (brightness < MIN_BRIGHTNESS ||
606 brightness > bd->props.max_brightness) {
607 dev_err(&bd->dev, "lcd brightness should be %d to %d.\n",
608 MIN_BRIGHTNESS, MAX_BRIGHTNESS);
609 return -EINVAL;
612 ret = s6e63m0_gamma_ctl(lcd, bd->props.brightness);
613 if (ret) {
614 dev_err(&bd->dev, "lcd brightness setting failed.\n");
615 return -EIO;
618 return ret;
621 static struct lcd_ops s6e63m0_lcd_ops = {
622 .set_power = s6e63m0_set_power,
623 .get_power = s6e63m0_get_power,
626 static const struct backlight_ops s6e63m0_backlight_ops = {
627 .update_status = s6e63m0_set_brightness,
630 static ssize_t s6e63m0_sysfs_show_gamma_mode(struct device *dev,
631 struct device_attribute *attr, char *buf)
633 struct s6e63m0 *lcd = dev_get_drvdata(dev);
634 char temp[10];
636 switch (lcd->gamma_mode) {
637 case 0:
638 sprintf(temp, "2.2 mode\n");
639 strcat(buf, temp);
640 break;
641 case 1:
642 sprintf(temp, "1.9 mode\n");
643 strcat(buf, temp);
644 break;
645 case 2:
646 sprintf(temp, "1.7 mode\n");
647 strcat(buf, temp);
648 break;
649 default:
650 dev_info(dev, "gamma mode could be 0:2.2, 1:1.9 or 2:1.7)n");
651 break;
654 return strlen(buf);
657 static ssize_t s6e63m0_sysfs_store_gamma_mode(struct device *dev,
658 struct device_attribute *attr,
659 const char *buf, size_t len)
661 struct s6e63m0 *lcd = dev_get_drvdata(dev);
662 struct backlight_device *bd = NULL;
663 int brightness, rc;
665 rc = kstrtouint(buf, 0, &lcd->gamma_mode);
666 if (rc < 0)
667 return rc;
669 bd = lcd->bd;
671 brightness = bd->props.brightness;
673 switch (lcd->gamma_mode) {
674 case 0:
675 _s6e63m0_gamma_ctl(lcd, gamma_table.gamma_22_table[brightness]);
676 break;
677 case 1:
678 _s6e63m0_gamma_ctl(lcd, gamma_table.gamma_19_table[brightness]);
679 break;
680 case 2:
681 _s6e63m0_gamma_ctl(lcd, gamma_table.gamma_17_table[brightness]);
682 break;
683 default:
684 dev_info(dev, "gamma mode could be 0:2.2, 1:1.9 or 2:1.7\n");
685 _s6e63m0_gamma_ctl(lcd, gamma_table.gamma_22_table[brightness]);
686 break;
688 return len;
691 static DEVICE_ATTR(gamma_mode, 0644,
692 s6e63m0_sysfs_show_gamma_mode, s6e63m0_sysfs_store_gamma_mode);
694 static ssize_t s6e63m0_sysfs_show_gamma_table(struct device *dev,
695 struct device_attribute *attr, char *buf)
697 struct s6e63m0 *lcd = dev_get_drvdata(dev);
698 char temp[3];
700 sprintf(temp, "%u\n", lcd->gamma_table_count);
701 strcpy(buf, temp);
703 return strlen(buf);
705 static DEVICE_ATTR(gamma_table, 0444,
706 s6e63m0_sysfs_show_gamma_table, NULL);
708 static int s6e63m0_probe(struct spi_device *spi)
710 int ret = 0;
711 struct s6e63m0 *lcd = NULL;
712 struct lcd_device *ld = NULL;
713 struct backlight_device *bd = NULL;
714 struct backlight_properties props;
716 lcd = devm_kzalloc(&spi->dev, sizeof(struct s6e63m0), GFP_KERNEL);
717 if (!lcd)
718 return -ENOMEM;
720 /* s6e63m0 lcd panel uses 3-wire 9bits SPI Mode. */
721 spi->bits_per_word = 9;
723 ret = spi_setup(spi);
724 if (ret < 0) {
725 dev_err(&spi->dev, "spi setup failed.\n");
726 return ret;
729 lcd->spi = spi;
730 lcd->dev = &spi->dev;
732 lcd->lcd_pd = dev_get_platdata(&spi->dev);
733 if (!lcd->lcd_pd) {
734 dev_err(&spi->dev, "platform data is NULL.\n");
735 return -EINVAL;
738 ld = devm_lcd_device_register(&spi->dev, "s6e63m0", &spi->dev, lcd,
739 &s6e63m0_lcd_ops);
740 if (IS_ERR(ld))
741 return PTR_ERR(ld);
743 lcd->ld = ld;
745 memset(&props, 0, sizeof(struct backlight_properties));
746 props.type = BACKLIGHT_RAW;
747 props.max_brightness = MAX_BRIGHTNESS;
749 bd = devm_backlight_device_register(&spi->dev, "s6e63m0bl-bl",
750 &spi->dev, lcd, &s6e63m0_backlight_ops,
751 &props);
752 if (IS_ERR(bd))
753 return PTR_ERR(bd);
755 bd->props.brightness = MAX_BRIGHTNESS;
756 lcd->bd = bd;
759 * it gets gamma table count available so it gets user
760 * know that.
762 lcd->gamma_table_count =
763 sizeof(gamma_table) / (MAX_GAMMA_LEVEL * sizeof(int *));
765 ret = device_create_file(&(spi->dev), &dev_attr_gamma_mode);
766 if (ret < 0)
767 dev_err(&(spi->dev), "failed to add sysfs entries\n");
769 ret = device_create_file(&(spi->dev), &dev_attr_gamma_table);
770 if (ret < 0)
771 dev_err(&(spi->dev), "failed to add sysfs entries\n");
774 * if lcd panel was on from bootloader like u-boot then
775 * do not lcd on.
777 if (!lcd->lcd_pd->lcd_enabled) {
779 * if lcd panel was off from bootloader then
780 * current lcd status is powerdown and then
781 * it enables lcd panel.
783 lcd->power = FB_BLANK_POWERDOWN;
785 s6e63m0_power(lcd, FB_BLANK_UNBLANK);
786 } else {
787 lcd->power = FB_BLANK_UNBLANK;
790 spi_set_drvdata(spi, lcd);
792 dev_info(&spi->dev, "s6e63m0 panel driver has been probed.\n");
794 return 0;
797 static int s6e63m0_remove(struct spi_device *spi)
799 struct s6e63m0 *lcd = spi_get_drvdata(spi);
801 s6e63m0_power(lcd, FB_BLANK_POWERDOWN);
802 device_remove_file(&spi->dev, &dev_attr_gamma_table);
803 device_remove_file(&spi->dev, &dev_attr_gamma_mode);
805 return 0;
808 #ifdef CONFIG_PM_SLEEP
809 static int s6e63m0_suspend(struct device *dev)
811 struct s6e63m0 *lcd = dev_get_drvdata(dev);
813 dev_dbg(dev, "lcd->power = %d\n", lcd->power);
816 * when lcd panel is suspend, lcd panel becomes off
817 * regardless of status.
819 return s6e63m0_power(lcd, FB_BLANK_POWERDOWN);
822 static int s6e63m0_resume(struct device *dev)
824 struct s6e63m0 *lcd = dev_get_drvdata(dev);
826 lcd->power = FB_BLANK_POWERDOWN;
828 return s6e63m0_power(lcd, FB_BLANK_UNBLANK);
830 #endif
832 static SIMPLE_DEV_PM_OPS(s6e63m0_pm_ops, s6e63m0_suspend, s6e63m0_resume);
834 /* Power down all displays on reboot, poweroff or halt. */
835 static void s6e63m0_shutdown(struct spi_device *spi)
837 struct s6e63m0 *lcd = spi_get_drvdata(spi);
839 s6e63m0_power(lcd, FB_BLANK_POWERDOWN);
842 static struct spi_driver s6e63m0_driver = {
843 .driver = {
844 .name = "s6e63m0",
845 .owner = THIS_MODULE,
846 .pm = &s6e63m0_pm_ops,
848 .probe = s6e63m0_probe,
849 .remove = s6e63m0_remove,
850 .shutdown = s6e63m0_shutdown,
853 module_spi_driver(s6e63m0_driver);
855 MODULE_AUTHOR("InKi Dae <inki.dae@samsung.com>");
856 MODULE_DESCRIPTION("S6E63M0 LCD Driver");
857 MODULE_LICENSE("GPL");