powercap: restrict energy meter to root access
[linux/fpc-iii.git] / drivers / pci / host / pcie-artpec6.c
blob212786b27f1a1b1f9ed9a07ba5c410617e2569c0
1 /*
2 * PCIe host controller driver for Axis ARTPEC-6 SoC
4 * Author: Niklas Cassel <niklas.cassel@axis.com>
6 * Based on work done by Phil Edworthy <phil@edworthys.org>
8 * This program is free software; you can redistribute it and/or modify
9 * it under the terms of the GNU General Public License version 2 as
10 * published by the Free Software Foundation.
13 #include <linux/delay.h>
14 #include <linux/kernel.h>
15 #include <linux/init.h>
16 #include <linux/pci.h>
17 #include <linux/platform_device.h>
18 #include <linux/resource.h>
19 #include <linux/signal.h>
20 #include <linux/types.h>
21 #include <linux/interrupt.h>
22 #include <linux/mfd/syscon.h>
23 #include <linux/regmap.h>
25 #include "pcie-designware.h"
27 #define to_artpec6_pcie(x) container_of(x, struct artpec6_pcie, pp)
29 struct artpec6_pcie {
30 struct pcie_port pp; /* pp.dbi_base is DT dbi */
31 struct regmap *regmap; /* DT axis,syscon-pcie */
32 void __iomem *phy_base; /* DT phy */
35 /* PCIe Port Logic registers (memory-mapped) */
36 #define PL_OFFSET 0x700
37 #define PCIE_PHY_DEBUG_R0 (PL_OFFSET + 0x28)
38 #define PCIE_PHY_DEBUG_R1 (PL_OFFSET + 0x2c)
40 #define MISC_CONTROL_1_OFF (PL_OFFSET + 0x1bc)
41 #define DBI_RO_WR_EN 1
43 /* ARTPEC-6 specific registers */
44 #define PCIECFG 0x18
45 #define PCIECFG_DBG_OEN (1 << 24)
46 #define PCIECFG_CORE_RESET_REQ (1 << 21)
47 #define PCIECFG_LTSSM_ENABLE (1 << 20)
48 #define PCIECFG_CLKREQ_B (1 << 11)
49 #define PCIECFG_REFCLK_ENABLE (1 << 10)
50 #define PCIECFG_PLL_ENABLE (1 << 9)
51 #define PCIECFG_PCLK_ENABLE (1 << 8)
52 #define PCIECFG_RISRCREN (1 << 4)
53 #define PCIECFG_MODE_TX_DRV_EN (1 << 3)
54 #define PCIECFG_CISRREN (1 << 2)
55 #define PCIECFG_MACRO_ENABLE (1 << 0)
57 #define NOCCFG 0x40
58 #define NOCCFG_ENABLE_CLK_PCIE (1 << 4)
59 #define NOCCFG_POWER_PCIE_IDLEACK (1 << 3)
60 #define NOCCFG_POWER_PCIE_IDLE (1 << 2)
61 #define NOCCFG_POWER_PCIE_IDLEREQ (1 << 1)
63 #define PHY_STATUS 0x118
64 #define PHY_COSPLLLOCK (1 << 0)
66 #define ARTPEC6_CPU_TO_BUS_ADDR 0x0fffffff
68 static u32 artpec6_pcie_readl(struct artpec6_pcie *artpec6_pcie, u32 offset)
70 u32 val;
72 regmap_read(artpec6_pcie->regmap, offset, &val);
73 return val;
76 static void artpec6_pcie_writel(struct artpec6_pcie *artpec6_pcie, u32 offset, u32 val)
78 regmap_write(artpec6_pcie->regmap, offset, val);
81 static int artpec6_pcie_establish_link(struct artpec6_pcie *artpec6_pcie)
83 struct pcie_port *pp = &artpec6_pcie->pp;
84 u32 val;
85 unsigned int retries;
87 /* Hold DW core in reset */
88 val = artpec6_pcie_readl(artpec6_pcie, PCIECFG);
89 val |= PCIECFG_CORE_RESET_REQ;
90 artpec6_pcie_writel(artpec6_pcie, PCIECFG, val);
92 val = artpec6_pcie_readl(artpec6_pcie, PCIECFG);
93 val |= PCIECFG_RISRCREN | /* Receiver term. 50 Ohm */
94 PCIECFG_MODE_TX_DRV_EN |
95 PCIECFG_CISRREN | /* Reference clock term. 100 Ohm */
96 PCIECFG_MACRO_ENABLE;
97 val |= PCIECFG_REFCLK_ENABLE;
98 val &= ~PCIECFG_DBG_OEN;
99 val &= ~PCIECFG_CLKREQ_B;
100 artpec6_pcie_writel(artpec6_pcie, PCIECFG, val);
101 usleep_range(5000, 6000);
103 val = artpec6_pcie_readl(artpec6_pcie, NOCCFG);
104 val |= NOCCFG_ENABLE_CLK_PCIE;
105 artpec6_pcie_writel(artpec6_pcie, NOCCFG, val);
106 usleep_range(20, 30);
108 val = artpec6_pcie_readl(artpec6_pcie, PCIECFG);
109 val |= PCIECFG_PCLK_ENABLE | PCIECFG_PLL_ENABLE;
110 artpec6_pcie_writel(artpec6_pcie, PCIECFG, val);
111 usleep_range(6000, 7000);
113 val = artpec6_pcie_readl(artpec6_pcie, NOCCFG);
114 val &= ~NOCCFG_POWER_PCIE_IDLEREQ;
115 artpec6_pcie_writel(artpec6_pcie, NOCCFG, val);
117 retries = 50;
118 do {
119 usleep_range(1000, 2000);
120 val = artpec6_pcie_readl(artpec6_pcie, NOCCFG);
121 retries--;
122 } while (retries &&
123 (val & (NOCCFG_POWER_PCIE_IDLEACK | NOCCFG_POWER_PCIE_IDLE)));
125 retries = 50;
126 do {
127 usleep_range(1000, 2000);
128 val = readl(artpec6_pcie->phy_base + PHY_STATUS);
129 retries--;
130 } while (retries && !(val & PHY_COSPLLLOCK));
132 /* Take DW core out of reset */
133 val = artpec6_pcie_readl(artpec6_pcie, PCIECFG);
134 val &= ~PCIECFG_CORE_RESET_REQ;
135 artpec6_pcie_writel(artpec6_pcie, PCIECFG, val);
136 usleep_range(100, 200);
139 * Enable writing to config regs. This is required as the Synopsys
140 * driver changes the class code. That register needs DBI write enable.
142 dw_pcie_writel_rc(pp, MISC_CONTROL_1_OFF, DBI_RO_WR_EN);
144 pp->io_base &= ARTPEC6_CPU_TO_BUS_ADDR;
145 pp->mem_base &= ARTPEC6_CPU_TO_BUS_ADDR;
146 pp->cfg0_base &= ARTPEC6_CPU_TO_BUS_ADDR;
147 pp->cfg1_base &= ARTPEC6_CPU_TO_BUS_ADDR;
149 /* setup root complex */
150 dw_pcie_setup_rc(pp);
152 /* assert LTSSM enable */
153 val = artpec6_pcie_readl(artpec6_pcie, PCIECFG);
154 val |= PCIECFG_LTSSM_ENABLE;
155 artpec6_pcie_writel(artpec6_pcie, PCIECFG, val);
157 /* check if the link is up or not */
158 if (!dw_pcie_wait_for_link(pp))
159 return 0;
161 dev_dbg(pp->dev, "DEBUG_R0: 0x%08x, DEBUG_R1: 0x%08x\n",
162 dw_pcie_readl_rc(pp, PCIE_PHY_DEBUG_R0),
163 dw_pcie_readl_rc(pp, PCIE_PHY_DEBUG_R1));
165 return -ETIMEDOUT;
168 static void artpec6_pcie_enable_interrupts(struct artpec6_pcie *artpec6_pcie)
170 struct pcie_port *pp = &artpec6_pcie->pp;
172 if (IS_ENABLED(CONFIG_PCI_MSI))
173 dw_pcie_msi_init(pp);
176 static void artpec6_pcie_host_init(struct pcie_port *pp)
178 struct artpec6_pcie *artpec6_pcie = to_artpec6_pcie(pp);
180 artpec6_pcie_establish_link(artpec6_pcie);
181 artpec6_pcie_enable_interrupts(artpec6_pcie);
184 static struct pcie_host_ops artpec6_pcie_host_ops = {
185 .host_init = artpec6_pcie_host_init,
188 static irqreturn_t artpec6_pcie_msi_handler(int irq, void *arg)
190 struct artpec6_pcie *artpec6_pcie = arg;
191 struct pcie_port *pp = &artpec6_pcie->pp;
193 return dw_handle_msi_irq(pp);
196 static int artpec6_add_pcie_port(struct artpec6_pcie *artpec6_pcie,
197 struct platform_device *pdev)
199 struct pcie_port *pp = &artpec6_pcie->pp;
200 struct device *dev = pp->dev;
201 int ret;
203 if (IS_ENABLED(CONFIG_PCI_MSI)) {
204 pp->msi_irq = platform_get_irq_byname(pdev, "msi");
205 if (pp->msi_irq <= 0) {
206 dev_err(dev, "failed to get MSI irq\n");
207 return -ENODEV;
210 ret = devm_request_irq(dev, pp->msi_irq,
211 artpec6_pcie_msi_handler,
212 IRQF_SHARED | IRQF_NO_THREAD,
213 "artpec6-pcie-msi", artpec6_pcie);
214 if (ret) {
215 dev_err(dev, "failed to request MSI irq\n");
216 return ret;
220 pp->root_bus_nr = -1;
221 pp->ops = &artpec6_pcie_host_ops;
223 ret = dw_pcie_host_init(pp);
224 if (ret) {
225 dev_err(dev, "failed to initialize host\n");
226 return ret;
229 return 0;
232 static int artpec6_pcie_probe(struct platform_device *pdev)
234 struct device *dev = &pdev->dev;
235 struct artpec6_pcie *artpec6_pcie;
236 struct pcie_port *pp;
237 struct resource *dbi_base;
238 struct resource *phy_base;
239 int ret;
241 artpec6_pcie = devm_kzalloc(dev, sizeof(*artpec6_pcie), GFP_KERNEL);
242 if (!artpec6_pcie)
243 return -ENOMEM;
245 pp = &artpec6_pcie->pp;
246 pp->dev = dev;
248 dbi_base = platform_get_resource_byname(pdev, IORESOURCE_MEM, "dbi");
249 pp->dbi_base = devm_ioremap_resource(dev, dbi_base);
250 if (IS_ERR(pp->dbi_base))
251 return PTR_ERR(pp->dbi_base);
253 phy_base = platform_get_resource_byname(pdev, IORESOURCE_MEM, "phy");
254 artpec6_pcie->phy_base = devm_ioremap_resource(dev, phy_base);
255 if (IS_ERR(artpec6_pcie->phy_base))
256 return PTR_ERR(artpec6_pcie->phy_base);
258 artpec6_pcie->regmap =
259 syscon_regmap_lookup_by_phandle(dev->of_node,
260 "axis,syscon-pcie");
261 if (IS_ERR(artpec6_pcie->regmap))
262 return PTR_ERR(artpec6_pcie->regmap);
264 ret = artpec6_add_pcie_port(artpec6_pcie, pdev);
265 if (ret < 0)
266 return ret;
268 return 0;
271 static const struct of_device_id artpec6_pcie_of_match[] = {
272 { .compatible = "axis,artpec6-pcie", },
276 static struct platform_driver artpec6_pcie_driver = {
277 .probe = artpec6_pcie_probe,
278 .driver = {
279 .name = "artpec6-pcie",
280 .of_match_table = artpec6_pcie_of_match,
283 builtin_platform_driver(artpec6_pcie_driver);