1 #ifndef _IEEE1394_HOSTS_H
2 #define _IEEE1394_HOSTS_H
4 #include <linux/device.h>
5 #include <linux/wait.h>
6 #include <linux/list.h>
7 #include <linux/timer.h>
8 #include <linux/skbuff.h>
10 #include <asm/semaphore.h>
12 #include "ieee1394_types.h"
20 struct list_head host_list
;
26 struct sk_buff_head pending_packet_queue
;
28 struct timer_list timeout
;
29 unsigned long timeout_interval
;
31 unsigned char iso_listen_count
[64];
33 int node_count
; /* number of identified nodes on this bus */
34 int selfid_count
; /* total number of SelfIDs received */
35 int nodes_active
; /* number of nodes that are actually active */
37 nodeid_t node_id
; /* node ID of this host */
38 nodeid_t irm_id
; /* ID of this bus' isochronous resource manager */
39 nodeid_t busmgr_id
; /* ID of this bus' bus manager */
41 /* this nodes state */
42 unsigned in_bus_reset
:1;
43 unsigned is_shutdown
:1;
44 unsigned resume_packet_sent
:1;
46 /* this nodes' duties on the bus */
53 quadlet_t
*topology_map
;
55 struct csr_control csr
;
57 /* Per node tlabel pool allocation */
58 struct hpsb_tlabel_pool tpool
[64];
60 struct hpsb_host_driver
*driver
;
67 struct class_device class_dev
;
69 int update_config_rom
;
70 struct work_struct delayed_reset
;
72 unsigned int config_roms
;
74 struct list_head addr_space
;
80 /* Host is requested to reset its bus and cancel all outstanding async
81 * requests. If arg == 1, it shall also attempt to become root on the
82 * bus. Return void. */
85 /* Arg is void, return value is the hardware cycle counter value. */
88 /* Set the hardware cycle counter to the value in arg, return void.
89 * FIXME - setting is probably not required. */
92 /* Configure hardware for new bus ID in arg, return void. */
95 /* If arg true, start sending cycle start packets, stop if arg == 0.
99 /* Cancel all outstanding async requests without resetting the bus.
103 /* Start or stop receiving isochronous channel in arg. Return void.
104 * This acts as an optimization hint, hosts are not required not to
105 * listen on unrequested channels. */
111 /* rawiso API - see iso.h for the meanings of these commands
112 (they correspond exactly to the hpsb_iso_* API functions)
113 * INIT = allocate resources
114 * START = begin transmission/reception
115 * STOP = halt transmission/reception
116 * QUEUE/RELEASE = produce/consume packets
117 * SHUTDOWN = deallocate resources
127 RECV_LISTEN_CHANNEL
, /* multi-channel only */
128 RECV_UNLISTEN_CHANNEL
, /* multi-channel only */
129 RECV_SET_CHANNEL_MASK
, /* multi-channel only; arg is a *u64 */
138 /* 166 microsecond reset -- only type of reset available on
139 non-1394a capable controllers */
142 /* Short (arbitrated) reset -- only available on 1394a capable
146 /* Variants that set force_root before issueing the bus reset */
147 LONG_RESET_FORCE_ROOT
, SHORT_RESET_FORCE_ROOT
,
149 /* Variants that clear force_root before issueing the bus reset */
150 LONG_RESET_NO_FORCE_ROOT
, SHORT_RESET_NO_FORCE_ROOT
153 struct hpsb_host_driver
{
154 struct module
*owner
;
157 /* The hardware driver may optionally support a function that is used
158 * to set the hardware ConfigROM if the hardware supports handling
159 * reads to the ConfigROM on its own. */
160 void (*set_hw_config_rom
) (struct hpsb_host
*host
, quadlet_t
*config_rom
);
162 /* This function shall implement packet transmission based on
163 * packet->type. It shall CRC both parts of the packet (unless
164 * packet->type == raw) and do byte-swapping as necessary or instruct
165 * the hardware to do so. It can return immediately after the packet
166 * was queued for sending. After sending, hpsb_sent_packet() has to be
167 * called. Return 0 on success, negative errno on failure.
168 * NOTE: The function must be callable in interrupt context.
170 int (*transmit_packet
) (struct hpsb_host
*host
,
171 struct hpsb_packet
*packet
);
173 /* This function requests miscellanous services from the driver, see
174 * above for command codes and expected actions. Return -1 for unknown
175 * command, though that should never happen.
177 int (*devctl
) (struct hpsb_host
*host
, enum devctl_cmd command
, int arg
);
179 /* ISO transmission/reception functions. Return 0 on success, -1
180 * (or -EXXX errno code) on failure. If the low-level driver does not
181 * support the new ISO API, set isoctl to NULL.
183 int (*isoctl
) (struct hpsb_iso
*iso
, enum isoctl_cmd command
, unsigned long arg
);
185 /* This function is mainly to redirect local CSR reads/locks to the iso
186 * management registers (bus manager id, bandwidth available, channels
187 * available) to the hardware registers in OHCI. reg is 0,1,2,3 for bus
188 * mgr, bwdth avail, ch avail hi, ch avail lo respectively (the same ids
189 * as OHCI uses). data and compare are the new data and expected data
190 * respectively, return value is the old value.
192 quadlet_t (*hw_csr_reg
) (struct hpsb_host
*host
, int reg
,
193 quadlet_t data
, quadlet_t compare
);
197 struct hpsb_host
*hpsb_alloc_host(struct hpsb_host_driver
*drv
, size_t extra
,
199 int hpsb_add_host(struct hpsb_host
*host
);
200 void hpsb_remove_host(struct hpsb_host
*h
);
202 /* The following 2 functions are deprecated and will be removed when the
203 * raw1394/libraw1394 update is complete. */
204 int hpsb_update_config_rom(struct hpsb_host
*host
,
205 const quadlet_t
*new_rom
, size_t size
, unsigned char rom_version
);
206 int hpsb_get_config_rom(struct hpsb_host
*host
, quadlet_t
*buffer
,
207 size_t buffersize
, size_t *rom_size
, unsigned char *rom_version
);
209 /* Updates the configuration rom image of a host. rom_version must be the
210 * current version, otherwise it will fail with return value -1. If this
211 * host does not support config-rom-update, it will return -EINVAL.
212 * Return value 0 indicates success.
214 int hpsb_update_config_rom_image(struct hpsb_host
*host
);
216 #endif /* _IEEE1394_HOSTS_H */