amd64_edac: check NB MCE bank enable on the current node properly
[linux/fpc-iii.git] / drivers / ide / q40ide.c
blob90786083b4393051536366254248373409df5a84
1 /*
2 * Q40 I/O port IDE Driver
4 * (c) Richard Zidlicky
6 * This file is subject to the terms and conditions of the GNU General Public
7 * License. See the file COPYING in the main directory of this archive for
8 * more details.
13 #include <linux/types.h>
14 #include <linux/mm.h>
15 #include <linux/interrupt.h>
16 #include <linux/blkdev.h>
17 #include <linux/ide.h>
19 #include <asm/ide.h>
22 * Bases of the IDE interfaces
25 #define Q40IDE_NUM_HWIFS 2
27 #define PCIDE_BASE1 0x1f0
28 #define PCIDE_BASE2 0x170
29 #define PCIDE_BASE3 0x1e8
30 #define PCIDE_BASE4 0x168
31 #define PCIDE_BASE5 0x1e0
32 #define PCIDE_BASE6 0x160
34 static const unsigned long pcide_bases[Q40IDE_NUM_HWIFS] = {
35 PCIDE_BASE1, PCIDE_BASE2, /* PCIDE_BASE3, PCIDE_BASE4 , PCIDE_BASE5,
36 PCIDE_BASE6 */
39 static int q40ide_default_irq(unsigned long base)
41 switch (base) {
42 case 0x1f0: return 14;
43 case 0x170: return 15;
44 case 0x1e8: return 11;
45 default:
46 return 0;
52 * Addresses are pretranslated for Q40 ISA access.
54 static void q40_ide_setup_ports(struct ide_hw *hw, unsigned long base, int irq)
56 memset(hw, 0, sizeof(*hw));
57 /* BIG FAT WARNING:
58 assumption: only DATA port is ever used in 16 bit mode */
59 hw->io_ports.data_addr = Q40_ISA_IO_W(base);
60 hw->io_ports.error_addr = Q40_ISA_IO_B(base + 1);
61 hw->io_ports.nsect_addr = Q40_ISA_IO_B(base + 2);
62 hw->io_ports.lbal_addr = Q40_ISA_IO_B(base + 3);
63 hw->io_ports.lbam_addr = Q40_ISA_IO_B(base + 4);
64 hw->io_ports.lbah_addr = Q40_ISA_IO_B(base + 5);
65 hw->io_ports.device_addr = Q40_ISA_IO_B(base + 6);
66 hw->io_ports.status_addr = Q40_ISA_IO_B(base + 7);
67 hw->io_ports.ctl_addr = Q40_ISA_IO_B(base + 0x206);
69 hw->irq = irq;
72 static void q40ide_input_data(ide_drive_t *drive, struct ide_cmd *cmd,
73 void *buf, unsigned int len)
75 unsigned long data_addr = drive->hwif->io_ports.data_addr;
77 if (drive->media == ide_disk && cmd && (cmd->tf_flags & IDE_TFLAG_FS)) {
78 __ide_mm_insw(data_addr, buf, (len + 1) / 2);
79 return;
82 raw_insw_swapw((u16 *)data_addr, buf, (len + 1) / 2);
85 static void q40ide_output_data(ide_drive_t *drive, struct ide_cmd *cmd,
86 void *buf, unsigned int len)
88 unsigned long data_addr = drive->hwif->io_ports.data_addr;
90 if (drive->media == ide_disk && cmd && (cmd->tf_flags & IDE_TFLAG_FS)) {
91 __ide_mm_outsw(data_addr, buf, (len + 1) / 2);
92 return;
95 raw_outsw_swapw((u16 *)data_addr, buf, (len + 1) / 2);
98 /* Q40 has a byte-swapped IDE interface */
99 static const struct ide_tp_ops q40ide_tp_ops = {
100 .exec_command = ide_exec_command,
101 .read_status = ide_read_status,
102 .read_altstatus = ide_read_altstatus,
103 .write_devctl = ide_write_devctl,
105 .dev_select = ide_dev_select,
106 .tf_load = ide_tf_load,
107 .tf_read = ide_tf_read,
109 .input_data = q40ide_input_data,
110 .output_data = q40ide_output_data,
113 static const struct ide_port_info q40ide_port_info = {
114 .tp_ops = &q40ide_tp_ops,
115 .host_flags = IDE_HFLAG_MMIO | IDE_HFLAG_NO_DMA,
116 .irq_flags = IRQF_SHARED,
117 .chipset = ide_generic,
121 * the static array is needed to have the name reported in /proc/ioports,
122 * hwif->name unfortunately isn't available yet
124 static const char *q40_ide_names[Q40IDE_NUM_HWIFS]={
125 "ide0", "ide1"
129 * Probe for Q40 IDE interfaces
132 static int __init q40ide_init(void)
134 int i;
135 struct ide_hw hw[Q40IDE_NUM_HWIFS], *hws[] = { NULL, NULL };
137 if (!MACH_IS_Q40)
138 return -ENODEV;
140 printk(KERN_INFO "ide: Q40 IDE controller\n");
142 for (i = 0; i < Q40IDE_NUM_HWIFS; i++) {
143 const char *name = q40_ide_names[i];
145 if (!request_region(pcide_bases[i], 8, name)) {
146 printk("could not reserve ports %lx-%lx for %s\n",
147 pcide_bases[i],pcide_bases[i]+8,name);
148 continue;
150 if (!request_region(pcide_bases[i]+0x206, 1, name)) {
151 printk("could not reserve port %lx for %s\n",
152 pcide_bases[i]+0x206,name);
153 release_region(pcide_bases[i], 8);
154 continue;
156 q40_ide_setup_ports(&hw[i], pcide_bases[i],
157 q40ide_default_irq(pcide_bases[i]));
159 hws[i] = &hw[i];
162 return ide_host_add(&q40ide_port_info, hws, Q40IDE_NUM_HWIFS, NULL);
165 module_init(q40ide_init);
167 MODULE_LICENSE("GPL");