mm: move shmem prototypes to shmem_fs.h
[linux/fpc-iii.git] / arch / arm / mach-msm / board-qsd8x50.c
blob6a96911b0ad508cdde70e79359a8e3480ce10c16
1 /* Copyright (c) 2009-2011, Code Aurora Forum. All rights reserved.
3 * This program is free software; you can redistribute it and/or modify
4 * it under the terms of the GNU General Public License version 2 and
5 * only version 2 as published by the Free Software Foundation.
7 * This program is distributed in the hope that it will be useful,
8 * but WITHOUT ANY WARRANTY; without even the implied warranty of
9 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
10 * GNU General Public License for more details.
12 * You should have received a copy of the GNU General Public License
13 * along with this program; if not, write to the Free Software
14 * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
15 * 02110-1301, USA.
18 #include <linux/kernel.h>
19 #include <linux/irq.h>
20 #include <linux/gpio.h>
21 #include <linux/platform_device.h>
22 #include <linux/delay.h>
23 #include <linux/usb/msm_hsusb.h>
24 #include <linux/err.h>
25 #include <linux/clkdev.h>
27 #include <asm/mach-types.h>
28 #include <asm/mach/arch.h>
29 #include <asm/io.h>
30 #include <asm/setup.h>
32 #include <mach/board.h>
33 #include <mach/irqs.h>
34 #include <mach/sirc.h>
35 #include <mach/gpio.h>
36 #include <mach/vreg.h>
37 #include <mach/mmc.h>
39 #include "devices.h"
41 extern struct sys_timer msm_timer;
43 static const resource_size_t qsd8x50_surf_smc91x_base __initdata = 0x70000300;
44 static const unsigned qsd8x50_surf_smc91x_gpio __initdata = 156;
46 /* Leave smc91x resources empty here, as we'll fill them in
47 * at run-time: they vary from board to board, and the true
48 * configuration won't be known until boot.
50 static struct resource smc91x_resources[] = {
51 [0] = {
52 .flags = IORESOURCE_MEM,
54 [1] = {
55 .flags = IORESOURCE_IRQ,
59 static struct platform_device smc91x_device = {
60 .name = "smc91x",
61 .id = 0,
62 .num_resources = ARRAY_SIZE(smc91x_resources),
63 .resource = smc91x_resources,
66 static int __init msm_init_smc91x(void)
68 if (machine_is_qsd8x50_surf()) {
69 smc91x_resources[0].start = qsd8x50_surf_smc91x_base;
70 smc91x_resources[0].end = qsd8x50_surf_smc91x_base + 0xff;
71 smc91x_resources[1].start =
72 gpio_to_irq(qsd8x50_surf_smc91x_gpio);
73 smc91x_resources[1].end =
74 gpio_to_irq(qsd8x50_surf_smc91x_gpio);
75 platform_device_register(&smc91x_device);
78 return 0;
80 module_init(msm_init_smc91x);
82 static int hsusb_phy_init_seq[] = {
83 0x08, 0x31, /* Increase HS Driver Amplitude */
84 0x20, 0x32, /* Enable and set Pre-Emphasis Depth to 10% */
88 static struct msm_otg_platform_data msm_otg_pdata = {
89 .phy_init_seq = hsusb_phy_init_seq,
90 .mode = USB_PERIPHERAL,
91 .otg_control = OTG_PHY_CONTROL,
94 static struct platform_device *devices[] __initdata = {
95 &msm_device_uart3,
96 &msm_device_smd,
97 &msm_device_otg,
98 &msm_device_hsusb,
99 &msm_device_hsusb_host,
102 static struct msm_mmc_gpio sdc1_gpio_cfg[] = {
103 {51, "sdc1_dat_3"},
104 {52, "sdc1_dat_2"},
105 {53, "sdc1_dat_1"},
106 {54, "sdc1_dat_0"},
107 {55, "sdc1_cmd"},
108 {56, "sdc1_clk"}
111 static struct vreg *vreg_mmc;
112 static unsigned long vreg_sts;
114 static uint32_t msm_sdcc_setup_power(struct device *dv, unsigned int vdd)
116 int rc = 0;
117 struct platform_device *pdev;
119 pdev = container_of(dv, struct platform_device, dev);
121 if (vdd == 0) {
122 if (!vreg_sts)
123 return 0;
125 clear_bit(pdev->id, &vreg_sts);
127 if (!vreg_sts) {
128 rc = vreg_disable(vreg_mmc);
129 if (rc)
130 pr_err("vreg_mmc disable failed for slot "
131 "%d: %d\n", pdev->id, rc);
133 return 0;
136 if (!vreg_sts) {
137 rc = vreg_set_level(vreg_mmc, 2900);
138 if (rc)
139 pr_err("vreg_mmc set level failed for slot %d: %d\n",
140 pdev->id, rc);
141 rc = vreg_enable(vreg_mmc);
142 if (rc)
143 pr_err("vreg_mmc enable failed for slot %d: %d\n",
144 pdev->id, rc);
146 set_bit(pdev->id, &vreg_sts);
147 return 0;
150 static struct msm_mmc_gpio_data sdc1_gpio = {
151 .gpio = sdc1_gpio_cfg,
152 .size = ARRAY_SIZE(sdc1_gpio_cfg),
155 static struct msm_mmc_platform_data qsd8x50_sdc1_data = {
156 .ocr_mask = MMC_VDD_27_28 | MMC_VDD_28_29,
157 .translate_vdd = msm_sdcc_setup_power,
158 .gpio_data = &sdc1_gpio,
161 static void __init qsd8x50_init_mmc(void)
163 vreg_mmc = vreg_get(NULL, "gp5");
165 if (IS_ERR(vreg_mmc)) {
166 pr_err("vreg get for vreg_mmc failed (%ld)\n",
167 PTR_ERR(vreg_mmc));
168 return;
171 msm_add_sdcc(1, &qsd8x50_sdc1_data, 0, 0);
174 static void __init qsd8x50_map_io(void)
176 msm_map_qsd8x50_io();
177 msm_clock_init(msm_clocks_8x50, msm_num_clocks_8x50);
180 static void __init qsd8x50_init_irq(void)
182 msm_init_irq();
183 msm_init_sirc();
186 static void __init qsd8x50_init(void)
188 msm_device_otg.dev.platform_data = &msm_otg_pdata;
189 msm_device_hsusb.dev.parent = &msm_device_otg.dev;
190 msm_device_hsusb_host.dev.parent = &msm_device_otg.dev;
191 platform_add_devices(devices, ARRAY_SIZE(devices));
192 qsd8x50_init_mmc();
195 MACHINE_START(QSD8X50_SURF, "QCT QSD8X50 SURF")
196 .boot_params = PLAT_PHYS_OFFSET + 0x100,
197 .map_io = qsd8x50_map_io,
198 .init_irq = qsd8x50_init_irq,
199 .init_machine = qsd8x50_init,
200 .timer = &msm_timer,
201 MACHINE_END
203 MACHINE_START(QSD8X50A_ST1_5, "QCT QSD8X50A ST1.5")
204 .boot_params = PLAT_PHYS_OFFSET + 0x100,
205 .map_io = qsd8x50_map_io,
206 .init_irq = qsd8x50_init_irq,
207 .init_machine = qsd8x50_init,
208 .timer = &msm_timer,
209 MACHINE_END